S Y S T E M P A C D E S I G N G U I D E
IBM Global Technology Services
SystemPac Enrichment
Form for Sysplex Layout (Version 1.1)
Updated: 2/10/2010
Customer Name Internal Use Only Page 1 of 27
S Y S T E M P A C D E S I G N G U I D E
INITIAL ENRICHMENT DATA ....................................................................................................................................... 4 CUSTOMER CONTACT INFORMATION ................................................................................................................................... 4 IBM CONTACT INFORMATION.............................................................................................................................................. 4 TAPE MEDIA SELECTION...................................................................................................................................................... 5 CPU INFORMATION.............................................................................................................................................................. 5 SYSTEM NAME, SYSPLEX NAME AND GLOBAL CSI SELECTION........................................................................................... 5 STANDALONE UTILITY TAPE................................................................................................................................................ 6 JES SUBSYSTEM................................................................................................................................................................... 6 SELECTIVE FOLLOW-ON SERVICE........................................................................................................................................ 6 IBM IMPLEMENTATION SERVICES FOR PARALLEL SYSPLEX (6948-74Z) ............................................................................. 7 ZONE NICKNAMES/ZONE NAMES:........................................................................................................................................ 8 TERMINAL AND PRINTER INFORMATION .............................................................................................................................. 9
Master Consoles............................................................................................................................................................... 9 TSO Terminals ................................................................................................................................................................. 9
I/O CONFIGURATION INFORMATION..................................................................................................................................... 9 OTHER VARIABLES ............................................................................................................................................................ 10 DASD................................................................................................................................................................................ 11 VOLUME LAYOUT......................................................................................................................................................... 12 UNIX FILE SYSTEM ............................................................................................................................................................ 13 SMS MANAGED DATA SETS .............................................................................................................................................. 13 INDIRECT CATALOG OPTION .............................................................................................................................................. 14 SMPE DATASETS............................................................................................................................................................... 15
SMPE VSAM Datasets ................................................................................................................................................... 15 SMPE Global Non-VSAM Datasets ............................................................................................................................... 17 SMPE TARGET & DLIB Non-VSAM Datasets .............................................................................................................. 17
MASTER CATALOG OPTIONS.............................................................................................................................................. 20 DATASET NAMES & USER CATALOG OPTIONS .................................................................................................................. 21 CATALOGS VOLUME ASSIGNEMENT .................................................................................................................................. 22 STATIC SYSTEM SYMBOLS ................................................................................................................................................. 22
SYSPLEX NAMING STANDARDS............................................................................................................................... 23 SYSPLEX NAME............................................................................................................................................................... 23 SYSTEM NAME ................................................................................................................................................................... 24 SYSTEM VOLUME NAMES................................................................................................................................................ 25 UNIX SYSTEM SERVICES FILE SYSTEM (SHARED) ............................................................................................................ 27
Customer Name Internal Use Only Page 2 of 27
S Y S T E M P A C D E S I G N G U I D E
Preface
This enrichment form is to collect customization data to tailor build your Sysplex enabled SystemPac. For normal SystemPac (without sysplex enabled), please use the form “ SystemPac Enrichment Form Vx.x) Upon completion of the form, please send it back to IBM. If there are questions with the form, please raise them to the IBM personnel who send this form to you.
S U M M A R Y O F C H A N G E S :
Date Change
03/06/2007 Original copy 04/05/2007 Updated Parallel Sysplex offerings 11/06/2007 CICS SVC’s 13/06/2007 Removed 3380 DASD device type 10/01/2007 Sysplex Layout support 12/11/2007 Added Internet option in media selection list and DASD layout modified 19/03/2008 Added Catalogs Volume assignment 26/09/2008 Added JES Subsystem selection 09/02/2009 Removed ISV customization questions
Contacts Contact
userid
IBM Manufacturing [email protected]
Customer Name Internal Use Only Page 3 of 27
S Y S T E M P A C D E S I G N G U I D E
Initial Enrichment Data Please fill out the following fields in the attached Initial Enrichment Form accordingly. Once the form has been received, IBM will input the information into our Production System. IBM will begin the build of your SystemPac after the input from the Enrichment form is completed. Note: The values highlighted in blue are default or recommended values that will be used to tailor and build your Sysplex enabled SYSTEMPAC. If you decide to change default values, refer to Sysplex Reference Architecture and Appendix of the form for recommended naming standard.
Customer Contact Information
Table 1 Customer Contact Information
Customer Name Customer Number Customer Contact Phone Number Email Customer Mailing Address for SystemPac
IBM Contact Information
Table 2 IBM Contact Information
Name Phone Number Email TECH-LINE (if known) Email
Customer Name Internal Use Only Page 4 of 27
S Y S T E M P A C D E S I G N G U I D E
Tape Media Selection Media Selection was made at time of order, please indicate a change if necessary. Read note about Internet orders.
Table 3 Media Selection
SELECT MEDIA TYPE 3480 348X (COMPACT) 3490E - High Density 36 Tracts
3590 - High Density 128 Tracks
3592 – High Density 512 Tracks
Internet
Select “Internet” option only if your order is submitted in ShopzSeries as Internet delivery order. Note that you cannot change an Internet delivery order to a physical media order and vice-versa.
CPU Information Table 4 CPU Information
Enter CPU INFO Notes CPU TYPE CPU Model CPU Serial CPU Capacity Indicator
System Name, Sysplex Name and Global CSI Selection Table 5 System Name and Global CSI Selection
Enter INFO Notes SYSNAME MZM1 Default is MZM1
System Name = LPAR Name = SMFID = JES Member ID Note: Read System Name section for system name naming convention
SYSPLEX NAME MZPLEX Default is MZPLEX. Note: Read SYSPLEX Name section for sysplex name naming convention
Multiple GLOBAL CSI? (Yes/No)
No Entering 'Yes' to 'Multiple GLOBAL CSI' will allow the Global CSI datasets to spread over each SREL (i.e. CICS,DB2,IMS or NCP) on an order, otherwise only ONE Global CSI dataset will be assigned.
Customer Name Internal Use Only Page 5 of 27
S Y S T E M P A C D E S I G N G U I D E
Standalone Utility Tape Table 6 Standalone Utility Tape
Enter INFO Notes Standalone Utility Tape Required
Yes Yes/No Entering ‘Yes’ to ‘Standalone Utility Tape Required’ will include 2 Standalone tapes on the same delivery media type: • Standalone Dump/Restore tape using DFSMSdss • Standalone DASD Initialization tape using ICKDSF Note: this option is only applicable to tape media delivery
JES Subsystem Table 7 JES Subsystem
Enter INFO Notes JES subsystem: JES2 or JES3 or Both
Select JES Subsystem that you would like to be delivered in SystemPac order. Default is both JES2 and JES3.
Note: This option is valid with SystemPac z/OS V1R10 and up. The orders with SystemPac z/OS V1R9 do not support this option.
If JES2 is specified, the JES3 Subsystem will not be delivered in the SystemPac If JES3 is specified, the JES2 Subsystem will not be delivered in the SystemPac If BOTH is specified, both JES2 and JES3 will be delivered in the SystemPac
Selective Follow-On Service The Selective Follow-On Service (SFS) package includes HOLDDATA, HIPER PTFs, and PTFs correcting PTFs-in-error with all required “PRE” REQ service. The package includes installation JCL and customized documentation for all subsystems in the original order. SFS tape media and shipping method will remain the same. You can request up to 3 SFSs per SystemPac. We recommend that the SFS(s) are set to be shipped at 30 day intervals.
Table 8 Service
Enter Selection
Notes
Number of SFS’s (0,1,2,or 3) Frequency Number of days between SFS Packages (Maximum 120 Days) Electronic Delivery (via FTP) (Yes or No) e-mail for electronic Delivery
Required if Electronic Delivery is specified to Yes
Customer Name Internal Use Only Page 6 of 27
S Y S T E M P A C D E S I G N G U I D E
IBM Implementation Services for Parallel Sysplex (6948-74Z)
Indicating a "Y" to the questions below mean the sample datasets containing the SYSPLEX best practices samples will be shipped in the SystemPac. All the samples are shipped “AS IS”.
Please ensure that you have acquired the IBM Implementation Services for Parallel Sysplex (6948-74Z) and would like to obtain these samples before answering "Y" to the questions below. If you have not acquired the offering and will like more information about it, please contact Anna Lee ([email protected]) or an IBM representative.
Table 8 Parallel Sysplex Offering
Enter Selection
Notes
Have you acquired the IBM Implementation Services for Parallel Sysplex Offering (6948-74Z)?
Yes (Y–Yes, N-No)
If yes, do you want the best practices samples included in the SystemPac?
Yes (Y–Yes, N-No) - only valid if customer acquired the Parallel Sysplex Offering
Provide value for MASID MZM1 MASID is the symbolic for the JES PLEX ID. It is possible to have multiple JES Plexes within the same parallel sysplex. Default is is ot be the same as System Name (MZM1).
Customer Name Internal Use Only Page 7 of 27
S Y S T E M P A C D E S I G N G U I D E
Zone Nicknames/Zone Names:
Zone checking will be preformed to ensure proper grouping/product compatibility and that products of different SRELs are not in the same zone.
Default zone names have been provided. You have the option of selecting your own zone names. Zone names MUST be less than or equal to 7 characters in length and each zone name MUST
be unique. If you have other products which are not listed in Table 9 and you want to assign specific
zones to them, please add to the table below or request for a list of your ordered products. Table 10 SMPE ZONE Information
Zone Description
Target Zone Name
Dlib Zone Name
Changed Target Zone Name
Changed Dlib Zone Name
z/OS Base MVST100 MVSD100
JES2 MVST110 MVSD110
JES3 MVST111 MVSD111
SDSF (starting with z/OS R11)
MVST112 MVSD112
WEBSPHERE FOR Z/OS MVST113 MVST113
IMS IMST200 IMSD200
DB2 DB2T300 DB2D300
NCP NCPT400 NCPD400
CICS CICT500 CICD500
SystemPac Full Volume Dump format only Add products below that you want to have assigned specific SMP/E zone.
(The products should not have dependencies on z/OS Base product) Product Number and version New Target Zone
Name New Dlib Zone
Name
Note: In order to provide additional migration flexibility, three additional SMP/E zones are defined with z/OS R11, JES2 with SDSF support is placed in one zone, JES3 in another and SDSF in third zone, all are separated from the remainder of z/OS. With SystemPac Full Volume Dump format you have option to merge JES2, SDSF product or JES3 into z/OS base zone, specifying the z/OS base zone names (ex. MVST100/MVSD100). If you specified that you would like that JES3 or JES2 not to be delivered in SystemPac order then, product code and related SMP/E zones for JES2 or JES3 will not be assigned and delivered with your order. In SystemPac Copy By Data set format, the new zones can later be merged into the z/OS zone during installation or at a later time, depending on the customer migration preference. If you ordered WebSphere for z/OS product, as default it would be delivered in a separate SMP/E zone. Sample zone names z/OS 1.10 base zones are provided in black italic. It should match your sysres volume name. It’s consisting of Sysplex prefix (MZ), z/OS version and release (1A) and
Customer Name Internal Use Only Page 8 of 27
S Y S T E M P A C D E S I G N G U I D E
the first sysres volume suffix (A1). If you would like to delete not required JES for example JES3 that can be done running provided post-IPL jobs after you receive the order. If you ordered WebSphere for z/OS product, as default it would be delivered in a separate SMP/E zone.
Terminal and Printer Information
Master Consoles Table 11 Consoles and Printers
Address Type Model Notes Master Console The address specified for the master console must be in the
NIP statement of your MVSCP or identified as a NIP console in the IODF. Valid values for Master, Alternative and JES3 Console Type are the following: 3270,3277, 3278 OR 3279
Alternative Console
JES3 Console if applicable System Printer if applicable
TSO Terminals Table 12 Local TSO Terminals
Address Type Model Notes TSO TERM1 A minimum of 2 terminal addresses are required, however
up to six addresses may be included. TSO TERM2 TSO TERM3 TSO TERM4 TSO TERM5 TSO TERM6 I/O Configuration Information
Table 13 IODF
IODF Input Configuration EDT Configuration ID
Customer Name Internal Use Only Page 9 of 27
S Y S T E M P A C D E S I G N G U I D E
Other Variables
Provide answers to the following variables if the products were ordered.
Table 14 IMS
SVC Module Name for IMS 8 chars, in form IGC00xxx Type 2 SVC Number for IMS 3 digits, between 200 and 255 Type 4 SVC Number for IMS 3 digits, between 200 and 255
Table 15 CICS
Type 3 SVC Number for CICS 3 digits, between 200 and 255 Type 6 SVC Number for CICS 3 digits, between 200 and 255
Customer Name Internal Use Only Page 10 of 27
S Y S T E M P A C D E S I G N G U I D E
DASD Please provide SYSRES, DLIB, CATALOG and SMP volumes using recommended System Layout. Place third parties' (vendors') products on different packs, separate from IBM products, place subsystem on its own different pack(s). Naming convention for volume names is available in this document in SYSTEM Volume Names section. Enter Required Volume Information:
Table 18 Volume Information
Volume Type Volser Name (6 char,
alphanum)
Address (4 digits in hex)
Unit Type (3390)
Model
SYSRES VOLUME #1 MZ1AA1 xxxx 3390 9
#2 MZ1AA2 xxxx 3390 9
#3
#4
DLIB VOLUME #1 DL1AA1 xxxx 3390 9
#2
#3
CATALOG VOLUME MZMCV1 xxxx 3390 9
SMP/E VOLUME #1 MZSMP1 xxxx 3390 9
Note: Listed sample volume names in black italic are preferred DASD Type and Model, for a z/OS V1R10 system. If you are preferred Sysplex prefix is not MZ, you can change it to a different prefix.
Table 19 Volume Information - continuation
Volume Type Default Volser
Name (6 char, alphanum)
New Volser Name
Address (4 digits in hex)
Unit Type (3390)
Model
Sysplex Shared
CDS = Couple Datasets P MZCDS1 Xxxx 3390 3
CDS = Couple Datasets S MZCDS2 Xxxx 3390 3
CDS = Couple Datasets B MZCDS3 Xxxx 3390 3
CKP = Checkpoint MZCKP1 Xxxx 3390 3
CKP = Checkpoint MZCKP2 Xxxx 3390 3
SEC = Security primary MZSEC1 Xxxx 3390 3
SMS = SMS MZSMS1 Xxxx 3390 3
SPL = Spool MZSPL1 Xxxx 3390 3
LOG = Logrec MZLOG1 Xxxx 3390 3
System Specific
PAG = Page Volume M1PAG1 Xxxx 3390 3
SMF = SMF M1SMF1 Xxxx 3390 3
Note: Listed volumes are default assigned volumes that will be delivered with SystemPac Sysplex Offering. They can be changed if your preferred Sysplex and system prefix is not MZ and M1.
Customer Name Internal Use Only Page 11 of 27
S Y S T E M P A C D E S I G N G U I D E
VOLUME LAYOUT
Table 20 Volume Layout
TYPE VOLSER ADDRESS UNIT MODEL
CICS TARGET
CICS DLIB
CICS SMP
IMS TARGET
IMS DLIB
IMS SMP
DB2 TARGET
DB2 DLIB
DB2 SMP
NCP TARGET
NCP DLIB
NCP SMP
Customer Name Internal Use Only Page 12 of 27
S Y S T E M P A C D E S I G N G U I D E
Unix File System
Table 21 Unix File System Options
Unix File System Options
HFS/zFS
Build file system in zFS or HFS format? zFS zFS is a mandatory option for Sysplex Offering
UNIX System Services File System (Shared) Yes Shared UNIX is option is mandatory for Sysplex offering
Merge z/OS products files systems into Version zFS? (MZ1AA1.VERSION.ROOT)
Yes If Yes, all z/OS components will be installed in a single version file system
SMS Managed Data Sets
Table 22 SMS Options
SMS Options
YES/NO
Build Unix HFS or zFS Data Sets on SMS-Managed DASD ? No
Build PDSE data sets on SMS-Managed DASD? No
SMS Storage Class: (Default = SMSUCLAS) No
SMS Storage Group: (Default = STG4FVD) No
PLEASE SUPPLY THE INFORMATION FOR 3 SMS VOLUMES - WE WILL USE ONLY AS NECESSARY.
Table 23 SMS Volumes
SMS Volume – VOLSER(6 DIGITS) STARTING ADDRESS UNIT MODEL
NOTE: SMS Volume cannot be zFS01/HFS01 – zFS10/HFS10 or CPACx – CPACx or same prefix as any other VOLSER’s in this order.
Customer Name Internal Use Only Page 13 of 27
S Y S T E M P A C D E S I G N G U I D E
Indirect Catalog Option
Table 24 Indirect Catalog Option
Catalog Options
YES/NO
Does this order required Indirect Catalog Referencing? Yes
NOTE: If indirect catalog referencing is not required (N is chosen) then N must be also entered for static system symbols.
Indirect cataloging allows the system to dynamically resolve volume and device type information for non-VSAM data sets residing on the system residence volume (SYSRES) when accessed through the catalog. This allows you to change the volume serial number or device type of the system residence volume without also having to recatalog the non-VSAM data sets on that volume. Indirect cataloging can be used only for non-VSAM data sets which reside on the SYSRES. With z/OS, in which many elements and optional features are provided, the space required by the data sets which logically belong on SYSRES may exceed the capacity of a single DASD volume. If some of these data sets are placed on overflow volumes rather than SYSRES, there is no way in the current indirect cataloging support to refer to them indirectly.
Customer Name Internal Use Only Page 14 of 27
S Y S T E M P A C D E S I G N G U I D E
SMPE Datasets
SMPE VSAM Datasets
Define Zone CSI Names: Changes to CSI Names if required...
Restrictions: o Names must be less than or equal to 26 characters o You have the option of grouping 2 entries in the same zone by specifying the same
zone name, or else the names must be unique for different zones. o Two different COBOL’s can't live in the same zone. o Subsystems and their related products must live in the same zone
(E.g. GDDM for CICS has to be in the same zone as CICS itself)
Table 25 Single SMPE Global
FOR SINGLE GLOBAL CSI NAMES
DEFAULT ZONE CSI NAME CHANGE TO CSI NAME IF REQUIRED
MVS GLOBAL CSI: SMP1A.GLOBAL.CSI Default name for z/OS 1.10 TARGET MVS MZ1AA1.SMP.CSI Default name for z/OS 1.10 and Sysplex
prefix MZ DLIB MVS DL1AA1.SMP.CSI Default name for z/OS 1.10
TARGET DB2 SMPE.DB2.TARGET.CSI
DLIB DB2 SMPE.DB2.DLIB.CSI
TARGET IMS SMPE.IMS.TARGET.CSI
DLIB IMS SMPE.IMS.DLIB.CSI
TARGET NCP SMPE.NCP.TARGET.CSI
DLIB NCP SMPE.NCP.DLIB.CSI
TARGET CICS SMPE.CICS.TARGET.CSI DLIB CICS SMPE.CICS.DLIB.CSI
Default names for MVS CSIs and Global in sysplex environment for z/OS 1.10:
Global CSI name: SMP&vr.GLOBAL.CSI, for V1R10 will be set to SMP1A.GLOBAL.CSI Target CSI: &sysres.SMP.CSI, for V1R10 it will be automatically renamed to
MZ1AA1.SMP.CSI DLIB CSI: &dlib.SMP.CSI, for it will be automatically renamed to DL1AA1.SMP.CSI
Customer Name Internal Use Only Page 15 of 27
S Y S T E M P A C D E S I G N G U I D E
Table 26 Multi-SMPE Global
FOR MULTIPLE GLOBAL CSI NAMES
DEFAULT ZONE CSI NAME CHANGE TO CSI NAME IF REQUIRED
MVS SMP1A.GLOBAL.CSI Default name for z/OS 1.10 MZ1AA1.SMP.CSI Default name for z/OS 1.10 and Sysplex
prefix MZ DL1AA1.SMP.CSI Default name for z/OS 1.10
CICS SMPE.CICS.GLOBAL.CSI
SMPE.CICS.TARGET.CSI
SMPE.CICS.DLIB.CSI
DB2 SMPE.DB2.GLOBAL.CSI
SMPE.DB2.TARGET.CSI
SMPE.DB2.DLIB.CSI
IMS SMPE.IMS.GLOBAL.CSI
SMPE.IMS.TARGET.CSI
SMPE.IMS.DLIB.CSI
NCP SMPE.NCP.GLOBAL.CSI
SMPE.NCP.TARGET.CSI
SMPE.NCP.DLIB.CSI
Restrictions: o Must conform to normal DSN requirements (e.g. less than 44 chars) o DSN's must end with .CSI o A unique CSI must exist for each zone; multiple zones may not be combined into
one CSI. o GLOBAL,TARGET/DLIB CSIs cannot have SRELs mixed i.e. IMS and CICS cannot be
placed in the same target/dlib CSIs or global
Default names for MVS CSIs and Global in sysplex environment for z/OS 1.10: Global CSI name: SMP&vr.GLOBAL.CSI, for V1R10 will be set to SMP1A.GLOBAL.CSI Target CSI: &sysres.SMP.CSI, for V1R10 it will be automatically renamed to
MZ1AA1.SMP.CSI DLIB CSI: &dlib.SMP.CSI, for it will be automatically renamed to DL1AA1.SMP.CSI
Customer Name Internal Use Only Page 16 of 27
S Y S T E M P A C D E S I G N G U I D E
SMPE Global Non-VSAM Datasets Table 27 SMPE Global Non-VSAM
ZONE SREL
SMPE DDDEF DDNAME
Dataset NAME Name Zone Type
Changes to if required
Comment
CICS SMPGLOG SMPE.CICS.SMPGLOG GLOBAL Only when multiglobal= Y
SMPGLOGA SMPE.CICS.SMPGLOGA GLOBAL Only when multiglobal= Y
SMPPTS SMPE.CICS.SMPPTS GLOBAL Only when multiglobal= Y
DB2 SMPGLOG SMPE.DB2.SMPGLOG GLOBAL Only when multiglobal= Y
SMPGLOGA SMPE.DB2.SMPGLOGA GLOBAL Only when multiglobal= Y
SMPPTS SMPE.DB2.SMPPTS GLOBAL Only when multiglobal= Y
IMS SMPGLOG SMPE.IMS.SMPGLOG GLOBAL Only when multiglobal= Y
SMPGLOGA SMPE.IMS.SMPGLOGA GLOBAL Only when multiglobal= Y
SMPPTS SMPE.IMS.SMPPTS GLOBAL Only when multiglobal= Y NCP SMPGLOG SMPE.NCP.SMPGLOG GLOBAL Only when multiglobal= Y
SMPGLOGA SMPE.NCP.SMPGLOGA GLOBAL Only when multiglobal= Y
SMPPTS SMPE.NCP.SMPPTS GLOBAL Only when multiglobal= Y
MVS SMPGLOG SMP1A.GLOBAL.SMPGLOG GLOBAL Default name for z/OS 1.10
SMPPTS SMP1A.GLOBAL.SMPPTS GLOBAL Default name for z/OS 1.10
SMPGLOGA SMP1A.GLOBAL.SMPGLOGA GLOBAL Default name for z/OS 1.10
SMPE TARGET & DLIB Non-VSAM Datasets Table 28 SMPE Target & DLIB Non-VSAM
ZONE SREL
SMPE DDDEF DDNAME
Dataset Name Zone Type
Changes to if required
CICD500 SMPDLOG SMPE.CICD500.SMPDLOG DLIB
SMPDLOGA SMPE.CICD500.SMPDLOGA DLIB
CICT500 SMPLTS SMPE.CICT500.SMPLTS TARGET
SMPMTS SMPE.CICT500.SMPMTS TARGET
SMPSCDS SMPE.CICT500.SMPSCDS TARGET
SMPSTS SMPE.CICT500.SMPSTS TARGET
SMPTLOG SMPE.CICT500.SMPTLOG TARGET
SMPTLOGA SMPE.CICT500.SMPTLOGA TARGET
DB2D300 SMPDLOG SMPE.DB2D300.SMPDLOG DLIB
SMPDLOGA SMPE.DB2D300.SMPDLOGA DLIB
DB2T300 SMPLTS SMPE.DB2T300.SMPLTS TARGET
SMPMTS SMPE.DB2T300.SMPMTS TARGET
SMPSCDS SMPE.DB2T300.SMPSCDS TARGET
SMPSTS SMPE.DB2T300.SMPSTS TARGET
SMPTLOG SMPE.DB2T300.SMPTLOG TARGET
SMPTLOGA SMPE.DB2T300.SMPTLOGA TARGET
IMSD200 SMPDLOG SMPE.IMSD200.SMPDLOG DLIB
SMPDLOGA SMPE.IMSD200.SMPDLOGA DLIB
Customer Name Internal Use Only Page 17 of 27
S Y S T E M P A C D E S I G N G U I D E
ZONE SREL
SMPE DDDEF DDNAME
Dataset Name Zone Type
Changes to if required
IMST200 SMPLTS SMPE.IMST200.SMPLTS TARGET
SMPMTS SMPE.IMST200.SMPMTS TARGET
SMPSCDS SMPE.IMST200.SMPSCDS TARGET
SMPSTS SMPE.IMST200.SMPSTS TARGET
SMPTLOG SMPE.IMST200.SMPTLOG TARGET
SMPTLOGA SMPE.IMST200.SMPTLOGA TARGET
DL1AA1 SMPDLOG SMP1A.DL1AA1.SMPDLOG DLIB Default name for z/OS 1.10
SMPDLOGA SMP1A.DL1AA1.SMPDLOGA DLIB Default name for z/OS 1.10
MVSD110 SMPDLOG SMPE.MVSD110.SMPDLOG DLIB JES2, if specified to be merged, it will be merged with z/OS base zone
SMPDLOGA SMPE.MVSD110.SMPDLOGA DLIB JES2, if specified to be merged, it will be merged with z/OS base zone
MVSD111 SMPDLOG SMPE.MVSD111.SMPDLOG DLIB JES3, if specified to be merged, it will be merged
with z/OS base zone SMPDLOGA SMPE.MVSD111.SMPDLOGA DLIB JES3, if specified to be
merged, it will be merged with z/OS base zone
MVSD112 SMPDLOG SMPE.MVSD112.SMPDLOG DLIB SDSF, if specified to be merged, it will be merged
with z/OS base zone SMPDLOGA SMPE.MVSD112.SMPDLOGA DLIB SDSF, if specified to be
merged, it will be merged with z/OS base zone
MVSD130 SMPDLOG SMPE.MVSD130.SMPDLOG DLIB
SMPDLOGA SMPE.MVSD130.SMPDLOGA DLIB
MZ1AA1 SMPLTS MZ1AA1.SMP.SMPLTS TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
SMPMTS MZ1AA1.SMP.SMPMTS TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
SMPSCDS MZ1AA1.SMP.SMPSDCS TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
SMPSTS MZ1AA1.SMP.SMPSTS TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
SMPTLOG MZ1AA1.SMP.SMPTLOG TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
SMPTLOGA MZ1AA1.SMP.SMPTLOGA TARGET Default name for z/OS 1.10 and Sysplex prefix MZ
MVST110 SMPLTS SMPE.MVST110.SMPLTS TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
SMPMTS SMPE.MVST110.SMPMTS TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
SMPSCDS SMPE.MVST110.SMPSCDS TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
SMPSTS SMPE.MVST110.SMPSTS TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
SMPTLOG SMPE.MVST110.SMPTLOG TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
SMPTLOGA SMPE.MVST110.SMPTLOGA TARGET JES2, if specified to be merged, it will be merged with z/OS base zone
MVST111 SMPLTS SMPE.MVST111.SMPLTS TARGET JES3, if specified to be
Customer Name Internal Use Only Page 18 of 27
S Y S T E M P A C D E S I G N G U I D E
ZONE SREL
SMPE DDDEF DDNAME
Dataset Name Zone Type
Changes to if required
merged, it will be merged with z/OS base zone
SMPMTS SMPE.MVST111.SMPMTS TARGET JES3, if specified to be merged, it will be merged
with z/OS base zone SMPSCDS SMPE.MVST111.SMPSCDS TARGET JES3, if specified to be
merged, it will be merged with z/OS base zone
SMPSTS SMPE.MVST111.SMPSTS TARGET JES3, if specified to be merged, it will be merged
with z/OS base zone SMPTLOG SMPE.MVST111.SMPTLOG TARGET JES3, if specified to be
merged, it will be merged with z/OS base zone
SMPTLOGA SMPE.MVST111.SMPLOGA TARGET JES3, if specified to be merged, it will be merged
with z/OS base zone MVST112 SMPLTS SMPE.MVST112.SMPLTS TARGET SDSF, if specified to be
merged, it will be merged with z/OS base zone
SMPMTS SMPE.MVST112.SMPMTS TARGET SDSF, if specified to be merged, it will be merged
with z/OS base zone SMPSCDS SMPE.MVST112.SMPSCDS TARGET SDSF, if specified to be
merged, it will be merged with z/OS base zone
SMPSTS SMPE.MVST112.SMPSTS TARGET SDSF, if specified to be merged, it will be merged
with z/OS base zone SMPTLOG SMPE.MVST112.SMPTLOG TARGET SDSF, if specified to be
merged, it will be merged with z/OS base zone
SMPTLOGA SMPE.MVST112.SMPTLOGA TARGET SDSF, if specified to be merged, it will be merged
with z/OS base zone MVST130 SMPLTS SMPE.MVST130.SMPLTS TARGET I
SMPMTS SMPE.MVST130.SMPMTS TARGET
SMPSCDS SMPE.MVST130.SMPSCDS TARGET
SMPSTS SMPE.MVST130.SMPSTS TARGET
SMPTLOG SMPE.MVST130.SMPTLOG TARGET
SMPTLOGA SMPE.MVST130.SMPTLOGA TARGET
NCPD400 SMPDLOG SMPE.NCPD400.SMPDLOG DLIB
SMPDLOGA SMPE.NCPD400.SMPDLOGA DLIB
NCPT400 SMPLTS SMPE.NCPT400.SMPLTS TARGET
SMPMTS SMPE.NCPT400.SMPMTS TARGET
SMPSCDS SMPE.NCPT400.SMPSCDS TARGET
SMPSTS SMPE.NCPT400.SMPSTS TARGET
SMPTLOG SMPE.NCPT400.SMPTLOG TARGET
SMPTLOGA SMPE.NCPT400.SMPTLOGA TARGET
Customer Name Internal Use Only Page 19 of 27
S Y S T E M P A C D E S I G N G U I D E
Master Catalog Options Table 29 Master Catalog Options
Master Catalog Options
Default standard is: CATALOG.&VR.&SYSPLEX.MCAT &VR = z/OS Version and Release
&SYSPLEX = Sysplex Name
Master Catalog Name CATALOG.V1R10.MZPLEX.MCAT
Note: Listed master catalog name in back italic is preferred name for z/OS 1.10, when sysplex name is MZPLEX. Change it if you are using a different Sysplex name.
Customer Name Internal Use Only Page 20 of 27
S Y S T E M P A C D E S I G N G U I D E
Dataset Names & User Catalog Options You have the option to change the product high level qualifier and catalog them into the user catalog. Please specify below which alias you want to rename, and where the alias should be cataloged in. *Please Note: The list below is a GENERIC list ONLY. All product DSNames are not included and it is not necessary to specify changes on all the Aliases listed. If you have other Aliases that are not listed below and you need them changed, please add them to this list. Table 30 Dataset & User Catalogs
ALIAS (Default)
ALIAS (User Defined)
TARGET SYSTEM CATALOG (Default is Master Catalog or Specify User Catalog)
CBC CATALOG.V1R10.MZPLEX.MCAT
CDS CATALOG.V1R10.MZPLEX.MCAT
CEE CATALOG.V1R10.MZPLEX.MCAT
CFZ CATALOG.V1R10.MZPLEX.MCAT
CIM CATALOG.V1R10.MZPLEX.MCAT
CMX CATALOG.V1R10.MZPLEX.MCAT
CPAC CATALOG.V1R10.MZPLEX.MCAT
CSF CATALOG.V1R10.MZPLEX.MCAT
DFHSM CATALOG.V1R10.MZPLEX.MCAT
DFRMM CATALOG.V1R10.MZPLEX.MCAT
DFSMS CATALOG.V1R10.MZPLEX.MCAT
DL1AA1 CATALOG.V1R10.MZPLEX.MCAT
EOX CATALOG.V1R10.MZPLEX.MCAT
EOY CATALOG.V1R10.MZPLEX.MCAT
EPH CATALOG.V1R10.MZPLEX.MCAT
EUV CATALOG.V1R10.MZPLEX.MCAT
EUVF CATALOG.V1R10.MZPLEX.MCAT
FFST CATALOG.V1R10.MZPLEX.MCAT
GDDM CATALOG.V1R10.MZPLEX.MCAT
GIM CATALOG.V1R10.MZPLEX.MCAT
GLD CATALOG.V1R10.MZPLEX.MCAT
GSK CATALOG.V1R10.MZPLEX.MCAT
HCM CATALOG.V1R10.MZPLEX.MCAT
ICQ CATALOG.V1R10.MZPLEX.MCAT
IMW CATALOG.V1R10.MZPLEX.MCAT
IOA CATALOG.V1R10.MZPLEX.MCAT
IOE CATALOG.V1R10.MZPLEX.MCAT
ISF CATALOG.V1R10.MZPLEX.MCAT
ISP CATALOG.V1R10.MZPLEX.MCAT
MZ1AA1 CATALOG.MZ1AA1.UCAT
OMVS CATALOG.V1R10.MZPLEX.MCAT
SMPE CATALOG.DL1AA1.UCAT
SMP1A CATALOG.DL1AA1.UCAT
SYS1 CATALOG.V1R10.MZPLEX.MCAT
TCPIP CATALOG.V1R10.MZPLEX.MCAT
Note: Listed master catalog and user catalog names in black italic are preferred catalog names for z/OS 1.10, where assigned sysplex name is MZPLEX. Change it if you are using a different Sysplex name.
Customer Name Internal Use Only Page 21 of 27
S Y S T E M P A C D E S I G N G U I D E
Catalogs Volume Assignement Table 31 Catalogs Volume Assignement
Catalogs Volume Assignement
Volume Primary Space
(Cylinders)
Secundary Space
(Cylinders)
CATALOG.MVSICFM.Vxxxxx Default CATALOG Volume 5 5
CATALOG.MVSICFU.Vxxxxx Default CATALOG Volume 5 5
Specify where master and user catalogs will be allocated for your new system, and the space required for each catalog. As the default all catalog will be allocated on Catalog volume.
Static System Symbols Table 32 System Symbolic
Define System Symbols
Yes/No Volume
Define in SYMDEF in IEASYMxx Yes
&SYSR1 MZ1AA1
&SYSR2 MZ1AA2
Using Static System Symbols allows one to indirect reference more than one volume. Now you can change the volume serial number or device type of the additional volume or volumes used for z/OS SYSRES without also having to recatalog the non-VSAM datasets. Please provide Symbol Names: NOTE: If symbolic definition is required (Y is chosen) then Y must be also entered for indirect catalog referencing. Note: Listed volume names are preferred names for z/OS 1.10, where assigned sysplex prefix is MZ. Change it if you are using a different Sysplex prefix
Customer Name Internal Use Only Page 22 of 27
S Y S T E M P A C D E S I G N G U I D E
SYSPLEX Naming Standards
SYSPLEX Name A Parallel Sysplex is named in order to uniquely identify and handle each Parallel Sysplex. The sysplex name as implemented in z/OS is limited in length to 8 characters. System Symbolic: &SYSPLEX. SYSPLEX Name Requirements:
1. Support multiple Sysplex Environments (Test, Development, Production, Maintenance) 2. Support 64 Sysplex 3. Max 8 Characters 4. One Character for the PLEX environment allows it to be used in the SYSTEM NAME.
Suggestion:
1. Start Sysplex identification with “Z” and increment in reverse order’ Table 33 Proposed Sysplex Name
Position
Description Sample
Sample TZPLEX T Sysplex Test Environment Z Sysplex ID 1
PLEX Sysplex Name 1 Sysplex Environment T TEST Environment
M Maintenance Environment D Development Environment Q Quality Assurance Environment P Production Environment
2 Sysplex ID Z Z - 0 3 - 6 Sysplex Name XXXXXX Sysplex Name Symbolic &SYSPLEX.
Customer Name Internal Use Only Page 23 of 27
S Y S T E M P A C D E S I G N G U I D E
System Name
Some products and data sets are shared between multiple systems. For example, if you share your sysres, a number of systems will all access the same SYS1.LINKLIB library.
However, there are some resources such as page data sets and STGINDX which are system specific and cannot be shared. The data set names of these resources should indicate which system they are used by.
A system name is used to identify and handle each system individually. Due to the use of the system name as part of the naming of other entities, and the MVS imposed limit of 8 characters for SYSNAME in SYS1.PARMLIB, its length is limited. As both the SMF ID and the member name within a MAS are limited to 4 characters, there are some benefits to restricting your system names to just 4 characters if you can fit sufficient information within that limitation.
System Name Requirements: 1. Support multiple system environments (Test, Development, Production, Maintenance) 2. Support 64 Systems 3. System Name = LPAR Name = SMFID = JES Member ID 4. Max 4 Characters (to be compatible with SMFID and JES2 member) 5. Derive the Sysplex Environment and ID where the system runs from the system name
Suggestion:
1. Start System identification with “1” and increment forward Table 34 System Name
Position
Description Sample
Sample TZT1 T Sysplex Environment Z Sysplex ID T LPAR Environment 1 LPAR Number
1 Sysplex Environment T TEST Environment M Maintenance Environment D Development Environment Q Quality Assurance / Test Environment P Production Environment
2 Sysplex ID X Z – 0 3 LPAR / System Environment T TEST Environment
M Maintenance Environment D Development Environment Q Quality Assurance Environment P Production Environment
4 LPAR / System ID L 0 - Z Symbolic &SYSNAME &SYSCLONE
Customer Name Internal Use Only Page 24 of 27
S Y S T E M P A C D E S I G N G U I D E
SYSTEM Volume Names z/OS Volume names are limited to 6 positions.
System Volume Name Requirements: 1. z/OS Version Release for SYSRES (makes SYSRES Clone easier to understand) 2. Logical SYSRES SET Identification (makes SYSRES Clone easier to understand) 3. Identify Volume Content from Volume name. 4. Identify Associated SYSPLEX from Volume name. 5. Identify Associated System from volume name (system specific volumes)
Table 35 Volume Names
Position
Description Sample
Sample SYSRES
TZ18A1 Sample SYSRES T Test Sysplex Environment Z Sysplex ID Z 1 z/OS Version 1 8 z/OS Release 8 A SYSRES SET A 1 SYSRES SET Volume 1
Sample System Specific
T1PAG1 Sample System Specific T Test System Environment 1 System ID 1
PAG System Function 1 Volume 1
Sample Sysplex Shared
TZSPL1 Sample Sysplex Shared T Test Sysplex Environment Z Stsplex ID Z
SPL System Function 1 Volume 1
1 - 2 Sysplex Environment or System Specific (EI) E Sysplex or System Environments T = TEST PLEX or TEST System P = PROD PLEX or PROD System D = Development PLEX or DEV System Q = Quality Assurance PLEX or QA system M = Maintenance PLEX or Maint System
I Sysplex id or System id F = 0 - Z
3 - 5 Level (VRS) for SYSRES or DLIB
VR Level for SYSRES Volumes V = z/OS Version R = z/OS Release
S SYSRES SET A = SYSRES or DLIB SET A B = SYSRES or DLIB SET B C = SYSRES or DLIB SET C
3 - 5 System Function xxx xxx System Specific PAG = Page Volume SMF = SMF
xxx Sysplex Shared SPL = Spool
LOG = Logrec CKP = Checkpoint SEC = Security CDS = Couple Datasets MCV = Master Catalog UCV = User Catalog SMP = SMPE RMM = RMM HSM = HSM
Customer Name Internal Use Only Page 25 of 27
S Y S T E M P A C D E S I G N G U I D E
Position
Description Sample
STG = Storage (non SMS) SAD = Stand Alone Dump
6 Volume Number (V) V Volume Number V = (0 – Z) Notes: The assumption is that all systems in the parallel sysplex share a master catalog and IPL off the same SYSRES SET. The Exception is new level of z/OS or an maintenance upgrade.
Customer Name Internal Use Only Page 26 of 27
S Y S T E M P A C D E S I G N G U I D E
UNIX System Services File System (Shared) USS File System Name Requirements (SYSPLEX SHARED):
1. ZFS compatible mode (single files system per ZFS) 2. HLQ of VERSION should be equal to the First volume (&SYSR1) of the associated SYSRES
SET. 3. Cataloged to a USER CATALOG that resides on the associated SYSRES SET
(CATALOG.&SYSR1.UCAT) 4. All z/OS Components should be installed in a single version files system, creating
separate Files systems for individual z/OS components cause the management of the SYSRES SET to be more complex.
5. Version ZFS should not be SMS Managed 6. System Specific File Systems MLQ should be equal to &SYSNAME 7. SYSPLEX Specific File Systems MLQ should be equal to &SYSPLEX
Table 36 USS Files System (SYSPLEX Shared)
Position
Description Sample
Sample SYSPLEX VERSION
&SYSR1.VERSION.ROOT MZ1AA1.VERSION.ROOT
Sample SYSPLEX ROOT
OMVS.&SYSPLEX.ROOT OMVS.MZPLEX.ROOT
Sample System Specific
OMVS.&SYSNAME.ZFS OMVS.&SYSNAME.ZFS.ETC OMVS.&SYSNAME.ZFS.DEV OMVS.&SYSNAME.ZFS.VAR OMVS.&SYSNAME.ZFS.TMP
OMVS.MZM1.ZFS OMVS.MZM1.ZFS.ETC OMVS.MZM1.ZFS.VAR OMVS.MZM1.ZFS.DEV OMVS.MZM1.ZFS.TMP
Customer Name Internal Use Only Page 27 of 27