Table of Contents
Preface and Committee
Chapter 1: Materials Engineering, Technology and Application
A Comparative Study of Neat Epoxy Coating and NanoZrO2/Epoxy Coating for CorrosionProtection on Carbon SteelX. Zhao, S. Liu and B.R. Hou 3
Analysis of Factors Influencing the Performance of Q460 SteelZ.L. Yan 7
Development and Application of Aluminium-Lithium AlloyC.L. Zou, G.H. Geng and W.Y. Chen 12
Friction and Rheological Properties of Meso-Porous MCM-41/Unsaturated Polyester In SituCompositesS.L. Hu, J. Lv, F.Y. Lu, H.S. Liu and D.M. Zeng 18
Experimental Study of Low-Pressure Water Jet Assisted Laser Drilling on Al2O3 CeramicP.W. Lu and G.F. Yuan 22
A New Method for Testing the Asphere Surface with a Liquid Crystal Spatial LightModulatorD. Fan 27
Analysis the Tool Wear of Screw Drill during the Drilling of Steel X04Cr16Ni12MnTiNJ. Jurko, A. Panda and I. Pandová 32
Comparative Study of Different Cadmium Salts on Nano-Structured CdS Thin FilmsPrepared by CBDL.J. Kong, W.P. Mi, L. Li, Q.Y. Jiang and W.W. Dong 36
Corrosion Resistance of X52 Pipeline Steel at Sea Mud ZoneX. Zhao, S. Liu and B.R. Hou 40
Effect of Mn (II) Ion on Abrasive-Free Polishing of Hard Disk SubstrateL. Fang, H. Lei and R. Zhao 44
Experimental Study on Process Parameters of High-Speed Micro-Milling Al2O3 CeramicsS. Yang, J.K. Xu, X.Z. Li, X.H. Zhang and Z.L. Zhao 48
Experimental Study on the Burning Behavior of Automotive Internal Decorating MaterialsY.L. Zheng, P.Y. Li, X.C. Ma and F. Qu 54
Influence of pH Values on the Morphology and Down-Conversion Luminescence Propertiesof Zinc Tungstate Micro Nano Crystal Synthesized by a Hydrothermal MethodH. Wang, L.L. Liu, B. Hou, J.J. Kou and L.L. Wang 58
Mechanical Properties Analysis and Application of Metal Matrix CompositesM. Shang and G.M. Lin 63
Medical Building Materials of Structural Properties and Electromagnetic InterferenceShielding in the Quartz Crystal Plane Coated Ni Based Thin FilmF.S. Hung 67
Morphology-Controlled Synthesis of ZSM-5/MCM-41 Composite ZeoliteH.R. Zhang, H.Y. Liu, Y. Jiang, X. Tao, X.H. Chang, W.S. Zhang, B. Wang, J.H. Liu and Y. Guo 77
Near Net Shape Forming Process of a Titanium Alloy Component Using Hot IsostaticPressing with Graphite MouldP.J. Xue, Y. Wu, J. Huang, Q.S. Wei, Y.S. Shi and C.Z. Yan 81
Nitrogen Doping Effects on Microstructure of Multi-Walled Carbon NanotubesN.C. Bing, Y.Y. Zeng, H. Gu, A.L. Wang and L.J. Wang 88
Research on Feasibility and Applicability of Delamination Localization Methods forComposite Laminated BeamsH. Ma, P. Lu, T. Jiang, S.F. Shi, J.B. Wei and J.B. Duan 92
Side Effects on Enhancing Chemical Herbicides to Control ProposalF.H. Gao 96
Simulation Research on Optical Performance of Multicrystalline Silicon Texture StructureF.Y. Zhang 99
Strengthen of Mechanism of 30CrMnSiNi2A Steel Welded Joint with Ultrasonic ImpactTreatmentZ.M. Li, Y.L. Zhu and X.K. Du 103
Study on Ball Milling of TiH2 and Application in Energetic MaterialsB. Xue, H.H. Ma, Z.W. Shen, Y. Yu and L.J. Ren 107
Study on Corrosion Damage Rule for Two Type of Aluminum AlloyD.F. Zhang, X.M. Tan, D.G. Zhang, F. Zhang and W. Zhang 111
Study on Features and Application of Typical Smart MaterialsG.M. Lin and Y.H. Li 114
Study on Nanometer ATO Powder Prepared with Citric Acid as Dispersant and itsConductive PropertiesX.B. Zhu, J. Chen and Z.J. Huang 118
Surface Modification on Rabbit Hair Fiber for Anti-Static and Ultraviolet ProtectiveProperties via ZnO NanopartcilesM.C. Li and Y. Zhang 124
Synergistic Effects of a Red Phosphorus Master Batch on a Modified Intumescent FlameRetardant ABS CompositesP.B. Dai, Y.Q. Lu, L.L. Fan and Y.R. He 128
Synergistic Flame Retardant Effect of Fumed Silica and Zinc Borate with MagnesiumHydroxide in ABS Based Flame Retardant CompositesG.L. Liang, J. Lin, P.B. Dai and Y.Q. Lu 132
Texture Evolution of Friction-Stir-Welded 5A30 Aluminum Alloy PlateW.Y. Gan, Z. Zhou, L.X. Wang and Y.G. Wu 136
The Aging Properties of Bamboo-Poplar Composite Oriented Strand Board with DifferentHybrid RatiosX.F. Fu, C. Yong and M.J. Guan 140
The Development of Double Composite Flexible Radar Absorbing Fabrics Based on IronFibersQ. Li, S.N. Wei and J.M. Yao 144
The Discussion about Concrete on the Relationship between Corrosion Resistance and Timeunder Bending LoadsZ.F. Xue and J. Li 148
The Friction and Wear Properties of Cu-Te-Li Alloys with High-Strength and High-ConductivityT. Zeng, L. Jiao, D.C. Zhu and C. Yang 153
The Range Distribution of Yb Ions Implanted in 6H Silicon CarbideX.F. Qin, G.J. Ma, S.H. Shi and F.X. Wang 160
Ultrasonic Inspection for Metal Creep Based on Flight-Time-AttenuationK.Y. Yuan, Z.D. Han, H.P. Zhou and Y.X. Zhong 164
Corrosion Behavior of Titanium Alloy and Titanium in Different SolutionS.F. Zhao, H.G. Jia and J.H. Wang 169
The Analysis of Temperature Field of Concrete Beam of Hydration HeatX.H. Yao 179
Effect of Fumed Silica and Zinc Borate on the Thermogravimetric Analysis Curves ofABS/Magnesium Hydroxide CompositeZ.T. Li, Y.Q. Lu, L.L. Fan, P.B. Dai, X. Su and X.Y. Hu 183
Analysis the Machined Surface Quality during the Drilling of Steel X04Cr16Ni12MnTiNJ. Jurko, A. Panda and I. Pandová 187
Double Sided Explosive Cladding of Stainless Steel and Regular SteelG.H. Miao, H.H. Ma, Z.W. Shen and Y. Yu 191
The Influence of Particle Diameter on Analytical ResultsF. Xie, H. Tan, Z.B. Li, H.B. Yang, H.D. Sun and R.H. Li 196
Experiment Research of Laser Induced Air BreakdownH.D. Wu 201
Chapter 2: Applied Mechanics, Design, Simulation and Manufacturing
b Frontiers of Manufacturing Science and Measuring Technology IV
A Study of Simulation of Hydropreumatic Suspension Experiment Rig Based on AMESimand Matlab/SimulinkZ.Q. Chao, C.M. Ning and H.Y. Li 207
90W Off-Line High Power Factor Correction Module DesignY. Liu 212
Applications of the Photothermal Cohesion Technology in the Fresh Air System and AirPurification DevicesX.H. Feng 216
Based on Rub a Drum Machine Four-Axis Machining Fixture Design and Modeling inSolidworks and Virtual AssemblyX.L. Ye 220
Based on Solidworks and Mastercam Combined for Rub a Drum of Four-Axis NCMachining Programming ResearchX.L. Ye 225
Cavitation Effect to the Hydraulic Piston Pump Flow PulsationH. Zhang 230
Comparison of the Load with Different Loading Ways in the Finite Element Model of theMobile Air Compressor FrameH.J. Yin, Y.Y. Liu, Z. Sun and X.L. Hong 237
Deformation Analysis of Dam with the Improved Wavelet ThresholdH.Y. Wen, M.Y. Yuan, J.Y. Hu and L. Zhou 242
Design and Analysis of a Novel Micro Flying Head in Mass Storage SystemY.H. Li, K.S. Guan, D.P. Zhao, Y.R. Qiu and Q.X. Li 248
Design and Optimize the Branch Pattern of Herringbone WellZ.Y. Liu, H.T. Yang, H.L. Chen, D.S. Yang, H.Z. Wang and W.W. Yang 254
Design and Simulation for Braking System of FSAE Racing CarT. Pei, F.H. Liu and J.J. Chen 258
Design and Simulation of a Descent Control Device Based on Hydraulic DampingL. Wang and Y.F. Wang 264
Design of a Type of Lift Coating MachineZ.L. Li, Y.J. Huang and X.L. Deng 268
Design of Injection Mould for the Special-Shaped Claw Cover of an Automatic BreastPump and Milking MachineX.P. Liu and X.J. Zheng 272
Design of Testbed for Feel Simulator of BattleplanJ. Zhang, A.Y. Yang and H.H. Chen 276
Development of Hole-Based Self-Centering Marking GaugeZ.D. Song 280
Development of the Assistant Positioning Device of Parallel Machine ViceZ.D. Song 284
Disk Cam Contour Design Based on Inventor 2009G.L. Feng, H.Z. Ding and X.R. Zeng 288
Dynamic Modeling of Shaking Table Based on Simulink/SimMechanicsW.B. Liu, G.F. Guan, W. Xiong, H.T. Wang and J.F. He 292
Dynamics Analysis of a 3-DOF Parallel MechanismQ.Z. Yang, J.H. Zhao, J.P. Song, Z.H. Wang, L.Q. Guo and B.B. Yao 296
Effect of the Rudder on the Vibration Frequency of Wind TurbineH.J. Wei, J.W. Wang, J.L. Ma, L. Yang and B. Dong 301
Electromagnetic Simulation and Dynamic Analysis about the Electromagnetic PropellingSystem of Magnetic Suspension LauncherY.S. Zhang, X.N. Chen, L.Y. Huang and P. Chen 306
Fault Diagnosis Approach for Incipient Bearing Fault in Wind Turbine under VariableConditionsL. Song, X.R. Zhang, L.W. Su and Y.J. Gu 312
Finite Element Analysis and Experimental Research for Horizontal Tank to InternalMagnetic Flux Leakage DetectionL.Q. Sun, H.B. Zhu, M. Xie and J.X. Li 321
Applied Mechanics and Materials Vols. 599-601 c
Hardware Design of Automotive Parking Heater Remoter and ReceiverY.T. Ge, X.M. Liu and X.T. Yin 326
Heavy Duty Automobile Self-Discharging Hydraulic System DesignY.L. Du, K.L. Sun and P. Zhang 332
Horizontal Well Fracturing Optimization Numerical SimulationZ.Y. Liu, W.W. Yang, H.Z. Wang, T. Luan, J.B. He and H.L. Chen 336
Hydraulic Excavator Boom Lightweight DesignX.L. Hu, J.H. Wang and H. Zhang 341
Intensive CNC Machine Programming with Circular Pattern AlgorithmQ. Gao and Y. Li 345
Machine Gun Finite Element Model Amending Based on Frequency Response Functions ofVibrationB.L. Wang and Z.W. Dong 349
Modeling and Simulation of Turbofan Engine Based on Modularized SubassemblyN. Cai, H.W. Li, M. Li and B. Ye 353
Modular Design Technology of Multi-DOF Mechanical ArmH. Qiang, H. Zhang and Y. Zhou 358
Multi-Objective Collaborative Optimization of SpringY. Peng, A.M. Gong and H.Y. Huang 362
Numerical Investigation of Tip Clearance Flow in an Axial Compressor CascadeZ.H. Xu, H.B. Lv and R.B. Zhao 368
Numerical Simulation of the Shell Fragments Damage-Field Based on ANSYS/LS-DYNAX.Y. Wu, F. Li and G. Qin 372
Numerical Simulation Research of Air-Assisted Atomizer Internal Gas Flow Field Based onFluentQ. Li and Y.Y. Huang 377
Parametric Design of Tapered End Mills with Variable Pitch for Improving StabilityL.L. He, Z.B. Liu, X.B. Wang and W.W. Lv 381
Permeability Improvement Technology of Directional Hydraulic Fracturing in LowPermeabilityX.X. Chen, R.Q. Bi, W.G. Jin and Y. Xu 385
Pre-Deformed Design of Optical Lenses with Reverse Engineering and VirtualManufacturingW.Z. Li and S.H. Wang 391
Research and Development of a Knowledge-Based System for Blanking DieB.F. Sun and Y. Song 396
Research on Attitude Singularity Problem of Small Tail-Sitter AircraftB. Wu, P. Chen, Y.J. Hu and C.L. Wang 401
Research on CNC Machining System of Directly Driven by Image Based on PMACX.M. Cheng, G. Zhou, P. Wu and Y.D. Wu 405
Research on Influence Factors of Landing Gear Retractile Hydraulic System PerformanceDegradationW.F. Zhu, Z. Yan and Q.W. Xin 409
Research on the Forming Path for Fabricating the Sheet-Metal Part with Non-HorizontalEnd Face Using CNC Incremental FormingH. Zhu, J. Ju and Y.B. Liu 413
Research on the Simulation of NC Milling Program Based on VERICUT Oriented to theFive-Axis Micro-Milling SystemX.H. Zhang, Z.W. Sun, J. Zhao and H.D. Yu 417
Research on the Stress Uniformity of the High Speed Bearing with Heavy Load in ColdRollingZ. Hong, B.S. Sun and B. Hu 422
Research on Typical Vibration Accelerations of Wind Wheel Changing with Yaw AngleJ.L. Ma, J.W. Wang, B. Dong and H.J. Wei 426
Rolling Bearing Feature Extraction Based on Wavelet Filtering with Optimal CombinationBandsS. Zhang, Y.X. Zhang and J.P. Zhu 434
d Frontiers of Manufacturing Science and Measuring Technology IV
Second-Order Two-Scale Asymptotic Expansions for Thermopiezoelectric Problems inPeriodic StructureZ.Q. Wang and J.Y. Cao 441
Simulation and Design of Portable Underwater Acoustic Transducer Test DeviceT.W. Huang, D.X. Chen and C.G. Fan 445
Simulation and Optimization Design of Gasoline Engine Exhaust MufflerJ. Cai, Y.H. Long, H.H. Du, J.L. Liu and W.S. Li 451
Simulation and Optimization for the Cooling System of Heavy Vehicle EngineW.S. Li, Y.H. Long, J.L. Liu, J. Cai and X. Zhan 455
Simulation and Parameter Design of a 10kw Wireless Power Transfer System Applied toGantry CraneD. Chen, L.G. Kang, H. Cheng and L. Zhang 460
Simulation and Test Study of Multidisc Magneto-Rheological Fluid ClutchD.M. Chen, Q.G. Cai and H. Zhang 464
Simulation Study on a Parallel Hybrid System of Hydraulic ExcavatorC.S. Liu, Q.H. He, J. Gong and Y.M. Zhao 468
Structural Optimization of Drilling Bed for Deep Hole Drilling MachineY.S. Guo, Y. Zhang and M.K. Cheng 473
Study on Influence of End Concavity of Rolled Piece by Billet Circular Arc Angle withCWRB. Hu, X.D. Shu and Z. Hong 478
Study on Split-Open Loading in V-Shaped Components Forming ProcessX.B. Li, Z.M. Zhang and Q. Wang 482
Study on the Welding of Feeder Hopper and Cylinder Instead of Casting ProcessY.Q. Liu and Y. Lv 486
The Design of the Fixture for the Thin Wall Cone PartsY. Zhou, H. Zhang and H. Qiang 489
The Design of Wave Height Standard Device in the WTTVS and its Error AnalysisX.H. Ma, S. Ye, X.L. Wang, C.Y. Yang, J. Guo and T. Su 493
The Design Research on the Key Components of Low-Speed Marine Diesel EngineT.T. Liu, G.J. Chen and Z.M. Liu 499
The Forced Response Analysis of Heavy Duty Vehicle’s CabJ.L. Liu, Y.H. Long, W.S. Li and J. Cai 503
The Nanocutting by Rigid/Elastic Tools with Nose Radius at the Gas Environment UsingMolecular Dynamics SimulationsJ.C. Huang and F.J. Cheng 507
The Optimal Design for Ring Blank Dimensions in Inner L-Shaped Ring Rolling ProcessW. Meng, G.Q. Zhao and Y.J. Guan 511
The Parametric Design and Simulation for Globoidal Indexing Cam MechanismL. Wang and M.F. Yin 517
The Research of New Rings Process of Casting-Rolling Continuously FormingL. Jia, Y.T. Li and L. Ju 522
Thermal Deformation Analysis of a Magnetic Climbing Wall Car Frame Based on theANSYSQ.Y. Lv, Y.S. Mei, B. Jia and X.J. Tao 526
UML Based Design Approach for Storage System of Nano-SatelliteH.H. Wang, H.Q. Wang and Z.H. Jin 530
Biomechanical Analysis of Typical Upper Limb Movements Based on Kinect-LifeMODM. Zeng, C.W. Chen, Q.H. Meng, H.L. Ren and S.G. Ma 534
Dynamics Simulation Research of Planar Four-Bar Mechanism with Multi-Joint ClearanceS.J. Bo, Z.J. Si and Q.H. Ye 539
Data Flow Analysis on 3D Printing for Distributed Manufacturing Information SystemW.J. Xu 543
Modal Analysis Based on Finite Element Jaw Crusher RotorM.L. Hao and G.J. Cheng 547
The Dynamic Strength Calculation on the Reel Fulcrum of Crane Based on ADAMS andFEAF.Q. Wu 551
Applied Mechanics and Materials Vols. 599-601 e
Surface Waviness in Abrasive Waterjet Offset-Mode TurningI. Zohourkari, M. Zohoor and M. Annoni 555
Develop the System of Three Dimensional Parametric Design of Planetary Gear ReducerParts Library Base on CS StructureG.J. Zhang, G.Y. Meng and M.W. Liu 560
Optimization Design of Hot Runner Injection Molding for Thin Shell Parts Based onMoldflowX.X. Zhu and H.X. Zheng 564
Parameter Identification of a Plastic Damage ModelX.P. Shen and X.C. Wang 568
Research on the Molding Condition of 3D Braided Nozzle Throat FabricY. Jiang and Z.K. Wan 574
Stress Analysis for Globoidal Indexing Cam Mechanism with Steel BallL. Li, C.L. Zhang and M. Wang 581
Stress Forming of Fine Metal Wire Based on Ultrasonic VibrationY. Luo, C.L. Yang, Y.M. Song and X.D. Wang 587
Study on Bladder Forming of the Shallow Basin-Shaped Aluminum Sheet PartsJ.L. Tu, Y.J. Wang, S.M. Wei, X.P. Hui and C.B. Qiu 591
Multi-Type of Generators Scheduling Optimization Model Based on LHS Method and theMean-CVaR ModelH.T. Yue, D.X. Peng, M.F. Huang and Z.F. Tan 595
Research on the Common Rail Transport System Building in Integration System of UrbanRail Transit in HohhotC.B. Li, Y. Zhang and R.X. Guo 599
Numerical Investigation of Choking Cavitator Based on Orthogonal ExperimentF.H. Zhang, L.W. Shan and C.L. Tang 603
Research on One Kind of Intellectualization High Accuracy Digital Adjustment DirectSourceY.H. Xu and D.T. Zhang 608
An Inquiry into the Sustainable Development of Cellulosic Ethanol in Tianjin, ChinaX. Feng, L. Li, A.Q. Mao, X.T. Feng and Y.H. Xie 612
Main Technologies of Life Support System of Evacuated Tube Transportation VehiclePassenger CabinY.P. Zhang 616
Modeling and Predicting Surface Roughness for the Grinding ProcessX.N. Wen 622
A Band-Gap Voltage Reference for LDO CircuitW.J. Zhang, Y. Zhao, J. Wang and K. Li 626
A Photovoltaic Soft Switching Boost CircuitY.J. Yu, S. Peng, Z.H. Xu, C. Tong and Y.T. Xue 631
Calculate Formation Velocity from Vertical Seismic Profiling DataJ. Zhou, C.H. Xie and P. Yang 639
Design of a 10MPa Nanosecond Gas Switch with Adjustable GapB.F. Cao, J.B. Fan, L.J. Song, X. Li, P. Li, H.W. Zhao, Q.H. Liu and W.S. Ning 643
HMI Design of Lead-Acid Battery Retreading System Based on DWIN DGUS ScreenX.Y. Hu and J.Z. He 648
Key Technologies of Rigid-Flexible Coupling System Modeling and SimulationS.J. Bo, H. Zhu and Q.H. Ye 652
Research Method and Key Design Themes of a Multifunctional Jacket with OptoelectronicEffectsJ.Y. Shih, S.L. Lai and H.T. Cheng 656
Design, Fabrication and Evaluation of a Multifunctional Jacket with Optoelectronic EffectsJ.Y. Shih, S.L. Lai and H.T. Cheng 660
Chapter 3: Measurement, Monitoring, Control and TestingTechnologies
f Frontiers of Manufacturing Science and Measuring Technology IV
A Certain Type of Artillery Open Loop Servo System Reform Research Allocation ZoomMultiplesZ.S. Jing, Y. Liu and S.C. Tu 669
A Control System on Soil TemperatureS.G. Chen, L.H. Hu, D.S. Wu and X.Y. Chen 673
A Method of Coordinate Measuring Path Planning Based on Polychromatic SetsC.M. Wang and F.S. Huang 680
A Novel Optical Fiber Displacement Measurement SystemK.S. Guan, Y.H. Li, Y.X. Chen and Y.R. Qiu 684
100MHz to 2.5GHz RF Detector Based on SiGe HBTR.Y. Chang and B.Y. Chi 689
A Kind of Online Insulation and Error Online Monitoring TechniqueH. Wang and R.Z. Wang 694
A Method of Correcting Brightness Gradient in Thermal Infrared ImageG.F. Yang 699
A Method of Full Digital Clock Generation with Adjustable Frequency and PhaseY.N. Lou, Z.H. Jin and C.J. Zhang 703
The Factors Influencing the Surface Quality of Machining and Improving MeasuresC.Q. Leng and X.J. Luo 707
The Intelligent Traffic Monitoring System Based on Beidou Research and DesignH.H. Wang 710
The Model Establishment and Simulation Analysis of Controllable PendulumF. Li, G.B. Shen, Z.C. Zhang and J.H. Zhao 714
The Number of Runs and its Application in Biological Medicine TestingL.M. Zhao and J.T. Huang 718
The Optimized Design of Coordinated Control System Based on Load Feedforward andUnidirectional DecouplingY.J. Zhai, J.Y. Zhang, Y.X. Zhang and J.S. Zhao 722
The Research of Network Intrusion Detection Technology Based on Genetic Algorithm andBP Neural NetworkG. Ke and Y.H. Hong 726
The Research of Radio Monitoring System for Army Digital Force TrainingX.W. Yang, J.H. Huo, J.K. Yang and Y.J. Liu 731
The Research of Self-Balancing Vehicle Based on Posture Sensor SystemM.X. Gao and J.P. Bai 735
The Resulting Toolpath of Turning a Special Surface on CNC LatheC.X. Tian 739
The Simulation about Single-Phase Bridge Type all Control the Rectifier Circuit is Based onMatlabM. Ji, J.F. He and P.F. Ji 743
The Study on Voltage Control Based on MAS and Grid TechnologyX.Y. He and Z. Ma 747
Theoretical Study on Bridge Structure Condition Evaluation Based on Health MonitoringDataZ.L. Wei, R. Yu and C.Y. Cheng 751
Transient Stability of Power System Based on Multi-Agent SystemX.Y. He, F. Liu and Z. Ma 755
Vehicle Trajectory Prediction Based on Road RecognitionQ.B. Shao, H. Guan and X. Jia 760
Waveform Measurement and Analysis of Common Household AppliancesX.T. Wang, X.B. Wang and H.Z. Zhang 767
A Novel of L-Serine/Chitosan Electrochemical Sensor for Determination of ParacetamolF.N. Tan, X.H. Pang and Y.B. Zhou 776
A Practical Signal Progressing Method for Magnetic Flux Leakage TestingZ.W. Ling, W.Y. Cai, S.H. Li and C. Li 782
A Single-Cell Replacement Strategy on Electronic Array Self-HealingT.Z. Meng, J.Y. Cai, Y.F. Meng and S. Zhu 786
Applied Mechanics and Materials Vols. 599-601 g
A Survey on Moving Target Tracking in the Intelligent Visual Monitoring SystemM.X. Li, G.L. Su, J. Hou and D. Zheng 790
Adaptive Fuzzy PID Control Applied in Boiler System of Power PlantY.J. Liu and Y.L. Wu 794
An Approach for Detecting Illegal Load in Wireless Power Transfer SystemX. Lv, L. Zhang and D.D. Zou 798
An Image Positioning Method of Automatic Random Walker Based on IFS Edge DetectionY.C. Qi, T. Li, M.X. Xi, Z.B. Zhao and Y.P. Cai 802
An Improved Adaboost Method for Face DetectionZ.X. Zhang, J. Wang and Y.D. Wang 807
An Improved Algorithm for Real-Time Moving Target Detection Based on GaussianMixture ModelX.Y. Chen, X.F. Lv and J. Liu 814
Analysis and Research of Rogowski Coil Current Sensing TechnologyY.Z. Gong and H. Liao 819
Analysis of Air Power Switch Work under HarmonicX.B. Wang, X.T. Wang and J. Huang 823
Application of BP Neural Network PID Algorithm in Refrigerated Space TemperatureControlW. Tian, Y.Z. Peng, P. Wang and X.Y. Wang 827
Application of Parameter-Adaptative Fuzzy PID Control in the Temperature ControlSystem for Liquor Filling and Sealing MachineQ.H. Gong 831
Approach to Design Digital Meter for Monitoring Armored Vehicle EngineX.Y. Qiao, J.M. Liu, X.M. Zhang, J. Liu and Z.Q. Liu 835
Auto Disturbance Rejection Control Strategy for Large Inertia Servo SystemK. Zhang and L.X. Jin 841
Automatic Test and Fault Diagnosing System of XX Airborne Navigation and ControlSystemT. Yuan, M.J. Liu, Y.J. Wang and F.R. Li 847
Based on Energy-Efficient Opportunistic Multicast Routing for Mobile Wireless SensorNetworksZ.Y. Zhang, S.J. Wen and W.Z. Yang 851
Critical Event-Triggered Transmission for Wireless Sensor Node in Aircraft StructuralHealth MonitoringP. Yao, G. Liu and Y. Liu 856
Design and Analysis of Dual Hall Position Sensor with Automatic Direction Recognizingand Pre-Positioning FunctionY.J. Zhang, Z.Y. Fang and J. Jin 860
Design and Analysis on the Anti-Lock Braking Control System of a Four-Wheel VehicleX.X. Liu, R. Wang and L. Yuan 864
Design for Speed Measuring of Railway Crossing Based on Track CircuitH.X. Xiao and S.Y. Zheng 870
Design of a Fast Resistance Sorting Instrument Based on STC MicrocontrollerJ.P. Yuan and F.F. Yu 874
Design of a Temporary Ground Wire Monitoring System and Reliability ResearchY.H. Kong, X.Y. Fu and Z.X. Chen 878
Design of a Two Levels Self-Integrating Capacitive DividerB.F. Cao, J.B. Fan, L.J. Song, X.Q. Zhang, X. Li, H.W. Zhao, P. Li and W.S. Ning 882
Design of Automatic Milking ControllerP. He, Y. Li, M. Wang and C. Liu 887
Design of Digital Type Axis-Angle Sensor Based on SinglechipJ.C. Yu, X.B. Yu and J. Li 892
Design of Plunger Limit Switch Testing System Based on Virtual Instrument TechnologyS. Chen, C.X. Tan and X.L. Fang 896
Design of the IDCTMV Human-Machine Ergonomics Test SystemQ. Wang, W.P. Liu, Y. Jin and B.H. Fu 900
h Frontiers of Manufacturing Science and Measuring Technology IV
Design of the Target Tracking Process Based on DM648G.Y. Yao and L. Song 904
Development of Experimental Apparatus for Diaphragm Gas Meter in the LimitingTemperature ConditionsZ.W. Huang, G. Guo, S. Ge and W.X. Shen 908
Development of the Portable Field First-Aid Diagnosis BedZ.J. Du, W.Y. Gao, C.J. Liu, J. Yang, S.J. Liu, X.J. Sun and F. Tian 914
Diesel Engine Inlet and Exhaust System Fault Detection Based on PSO-BP NNZ.P. You, W.H. Zhang and X.P. Ye 918
Effects of Quay Wall and Seabed Reflection on the AUV Acoustic Radiation Test AnalysisG.L. Xu, Q.W. He, S.C. Ding and H.B. Wan 922
Empirical Likelihood Based Testing for Polynomial Regression ModelsP.X. Zhao 927
Experimental Study on the Emergency Ampacity of XLPE Cable and its ApplicationX.L. Zhuang, H.Q. Niu, Q.F. Zhang, K.F. Ye and G.H. Sun 931
Experiments and Analyses of Horizontal Earth Electrodes’ TGR on Various GroundsX.B. Qu, B.H. Zhou, Y.P. Fu, Y.X. Li and T. Wang 935
Finite Element Analysis of Capacitance SensorF. Zhou, G.M. Lin, M. Shang and W.G. Zhang 940
FPGA-Based High Precision Illumination Measurement System: A Prototype Developmentand EvaluationX.Z. Yang 944
Frequency Control QPSK Modulator Based on DDS TechnologyG.Q. Luo, J.D. Yu and Y. Wang 948
Fuzzy Neural Network Based on Genetic Algorithm for Temperature Control of VariableAir Volume Air ConditioningJ.J. Li, Y.Q. Chen and X.Y. Han 952
Hybrid Base and Parallel Hybrid Electric Vehicle Control StrategyS.T. Yan 956
Improvement of Stable Operation Ability for Large-Scale Wind Power System Based onVSC-HVDC TechnologyC.C. Rao, H.Y. Wang and W.Q. Wang 960
Initial Orbit Determination Using Single Frequency GPS Measurements of Launch VehicleG.H. Xue, J.S. Mu, H.F. Li, L.W. Zhu and Y. Liu 964
In Situ Tester Research and Development of Control Stick Force SensorG.M. Yan, D.C. Zhao and A.Y. Yang 970
Laser-Welding Spots Detection Based on Original Moment ValuesX.L. Qi, B. Fang and S.M. Wang 974
Many High Performance Motion Control of Linear Motor Drive System ResearchC.J. Li and Q.J. Liang 981
Modal Hammering Test and Sensitivity Analysis for BIW VehicleC.W. Liu 985
Modeling Analysis and Experimental Study of Circular Piezoelectric Unimorph ActuatorG.J. Liu, X.L. Yang, X.H. Yang, T. Zhao, Z.G. Yang and J.F. Liu 992
New Method of Angle Error Measurement in Angular Artifacts Using Minimum ZoneFlatness PlaneM.I. Khan and S.Y. Ma 997
Nondestructive Testing Methods of Coating PerformanceZ.G. Zhang 1005
Offset Error Research of Self-Triggering Pulsed Mini Laser Radar SystemW. Zhan and H.H. Ju 1009
Ontology and Multi-Agent Based Intelligent Retrieval Model for Power Quality MonitoringInformationJ.H. Wang, C.Y. Yang, G.Q. Mu and D. Tan 1016
Optimization of Reliability Test on the Shell of Portable Electronic Products Based onTaguchi MethodX.M. Du, W. Lei, N.J. Wang and J.Y. Ding 1021
Applied Mechanics and Materials Vols. 599-601 i
Research and Application on Intrusion Detection Technology Based on Improved BMAlgorithmP.H. Zhu and X.F. Hou 1025
Research and Design of Touch-Screen Domestic Universal Remote Controller with Self-Learning FunctionC.R. Zhang, X.K. Zhang and N.N. Yu 1028
Research on Active Online Diagnosis Technology of Hydraulic SystemC.G. Yang, C.H. Zhang, J.Y. Zhao and S.M. Zhao 1032
Research on Data Acquisition Technology of Wind Turbine Monitoring SystemY.B. Zuo 1036
Research on Key Techniques of Multi-Sensor Intelligent Video Surveillance SystemH.Q. Wu, X.B. Li, Z.J. Yuan and J. Wang 1040
Research on Test Technology of Remote Weapon Station’s Dynamic ParameterB.Q. Mao, W. Deng, S.S. Wang and P.F. Li 1044
Research on the Pattern of Boom-Type Roadheader Intelligent Control SystemZ.M. Zhao, R.H. Liu and J. Zhao 1048
Research on the Simulation Design System of Indoor Precise Control Field Based on VRMLC. Yang, H. Li, P. Gao and R.C. Zhang 1052
Research on the Technology of Middleware of Distributed Spectrum Monitoring SystemM.L. Jiang, J.F. Feng and K. Li 1057
Simulation of Magnetically Controlled Reactors Based on MATLABP.K. Xie and G.Z. Chen 1064
Splitting Strength Detection Test of Shallow Asphalt Pavement and Master Curve ofSplitting StrengthM.C. Zhao, T. Long, M. Xu and H.S. He 1068
Study on Intelligent Anti-Theft Alarm System of Power TransformerH. Pu, M. Wu and Y. Xiao 1073
Synchronization Control Scheme for Antenna Pointing Control System Based on HybridLinear ActuatorP. Yao, G. Liu and Y. Liu 1077
Test and Analysis of Dynamic Characteristics of Reinforced Concrete Arch BridgeJ.L. Xu and Y.L. Zhang 1081
Testing Research of Fiber Bragg Grating Strain Sensor Embedded in Bored PileM. Huang, Y.H. Wu, Y.Y. Guan, Y.N. Li, T. Xie, Z.G. Zhao and C. Li 1085
The Application of PSO-BP Neural Network PID Controller in Variable Frequency SpeedRegulation SystemC.H. Li, S.X. Xu, Y. Xie and J. Zhao 1090
The Construction Quality Control Measures of Reinforced Concrete Cover ResearchS.J. Zhang 1094
The Design and Simulation of Scheelite Alkali Autoclave Reactor Fuzzy-PID ControllerX.Y. Luo, B. Chen, M. Yu and Q. Xiong 1098
The Design of Automatic Remote Monitoring System for the Temperature and HumidityBased on GPRSH. Zhang and H.H. Wang 1102
The Design of Communication System for Wearable Health Monitoring EquipmentH. Ma, H. Liu and Z.Q. Ma 1106
The Design of Greenhouse Temperature Control SystemX.Y. Wang, Z.W. Zhou and T. Wu 1111
The Design of Landslide Hazard Remote Monitoring System Based on STM32 MCU andGPRSJ.L. Cai, G. Li, X.L. Bu, X.G. Liu and H.L. Xing 1115
The Development of an Automatic Ultrasonic Non-Destructive Testing SystemX.M. Zheng, J. Hu and Y.S. Chen 1120
Design of Temperature Control System Based on FPGA and Fuzzy-PID Control AlgorithmY.J. Chen 1124
Development of Two-Dimensional Motion Platform Control System Based on xPC TargetX.H. Zhang, Z.W. Sun, J. Zhao and H.D. Yu 1128
j Frontiers of Manufacturing Science and Measuring Technology IV
Research on PVDF Micro-Force SensorC.Z. Ma, J.S. Du and Y.Y. Liu 1135
Sound Recognition Algorithm for Power Devices Based on Substation Inspection RobotsD.S. Li, Z.Q. Zhou, C. Zhang, P. Du and Y.R. Hu 1139
Static Characteristic Test of High Temperature Pressure SensorF. Zhou, G.M. Lin, W.G. Zhang and M. Shang 1145
The Characteristics of Dyed Fancy Yarn Formation Pattern ResearchB.R. Wang, J. Chen and X.Y. Xin 1149
The Measurement of Concrete Temperature Distribution Based on VBX.H. Yao 1154
An Intelligent Traffic Signal Controller Based on CAN BusS.Y. Cheng, X.M. Zhou and Q. Jiang 1158
Introduction to Computers in the Mechanical and Electrical Control is Widely Used in theField of IndustryC.Q. Leng and Y.L. Huang 1162
Long-Endurance Multi-Function Floating PlatformR. Li, Z.S. Ni, X.L. Wang and B.H. Che 1165
A Fast Pose Estimation Method of Four-Rotor AircraftC.D. Xu and H.X. Ma 1169
Research of Small Current Grounding Fault Classification Based on Phase Plane MethodW.M. Zhan and J. Wang 1174
A Kind of Portable Wire Rope Testing EquipmentZ.J. Yang and L.L. Liu 1178
Blind Pipe Type Fiber Bragg Grating Hydrostatic GaugeM. Huang, T. Xie, J.Q. Li, Y.N. Li, Z.G. Zhao, W.B. Wu, X. Ouyang and C. Li 1182
Research on the Detection of Focusing MechanismsF.M. Chai, Y.C. Fan, H.W. Xin and Z.L. Li 1186
Design of Programmed Temperature Control Gas-Sensing Characteristic TesterG.L. Liu, H. Suo, J.T. Wei, S. Lv and X.T. Yang 1190
Development of Automatic CNC Grooving and Bending Machine Based on MPC08SPMotion Control CardJ.D. Zhao and M.F. Yin 1196
Research on XCTD Launcher Based on EML TechnologyY.S. Zhang, X.N. Chen, L.Y. Huang and P. Chen 1201
Scanning Mirror Topology Optimization of the Imaging SpectrometerH.F. Cong 1205
Development of the Comprehensive Performance Test Equipment of the ElectromagneticSwitch on Automobile StarterX.M. Zheng, J. Hu and H.B. Ji 1211
Dynamic Matrix Control for Multiple Gas Collectors of Coke OvensK. Li, J. Dong and M.L. Jiang 1215
Effect of Vehicle Speed on Contact Pressure and Current Collecting QualityJ.C. Xu and X.B. Li 1220
Gear Fault Signal Modeling Study Based on Probability Box TheoryA. Liu, Y. Du and J.M. Ding 1225
5T Information Fusion System Based on Train Technology Scheme DesignH. Yang, J.H. Yue and J. Yan 1229
Prediction of PAHs Emitted from Marine Diesel Engine Using Artificial Neural NetworksCombining Genetic AlgorithmsM.Y. Wang, S.J. Zhang and X. Zhang 1233
Research on Flood Control Operation for Poyang Lake Semi-Restoration Dikes are Basedon Variable Fuzzy Optimization TheoryH. Yan 1237
Research on Reliability Allocation Method for NC Grinding MachineH.H. He 1244
Selection of Plate Self-Locking NutK. Hou, H. Zhang and G.J. Li 1249
Applied Mechanics and Materials Vols. 599-601 k
Study on Automobile Intelligent Automatic Clutch SystemM. Wu and Z.R. Tang 1253
Study on Simulation of Aircraft Background Magnetic FieldJ.Y. Zhao and C.S. Lin 1257
Computer Modal Analysis of the Two-Dimensional Precision TurntableG.F. Shi, B. Yang, G.Q. Shi and J. Liu 1261
The Electrical Standard Practices in the Role of Airbus Aircraft MaintenanceR.Y. Duan 1265
Application of Inverse Distance Weighted Interpolation Method in Finite TemperaturePoint Temperature FieldF.C. Zhang and X.G. Sun 1268
The Localization Method of ALV Based on Lateral DynamicsX. Chen, M. Tao, X.L. Yue and J.B. Song 1272
The Path Recognition Method of Smart Car Based on Linear CCDS.Y. Zhang, X.B. Yang, G.X. Huang and J.S. Du 1276
Soft-Starting Method Analysis of Belt ConveyorJ.H. Li and S. Zhao 1280
The Tool Setting Skills of Round Parts in NC MillingL.P. Xu and P. Wang 1283
Research of Tracking and Prediction of Moving Object with KalmanZ.Y. Wang and S.C. Yang 1287
A Four-Coordinate CNC Device Based on Engraving and Milling MachineW.M. Zhao, L.Y. Shen and C.Z. Yang 1291
Chapter 4: Communication and Navigation, Information Technologies,Algorithms and Numerical Methods, Image, Video, Signal and DataProcessing
Design and Research of Biological Information Based on the Signal Extraction AlgorithmY. Yu, Q.B. Yuan and X. Li 1297
A GIS and Web-Based Decision Support System for Regional Water Resource Managementand PlanningW.M. Zhang, Z. Shen, W.J. Pan and R.H. Ye 1301
A New Numerical Scheme for the Space Fractional Diffusion EquationJ.Y. Cao and Z.Q. Wang 1305
A Class of Difference Inequality with Three Iterative SummationW.S. Wang and H.J. He 1309
A Degree Distribution Optimization Algorithm in Unequal-Protected LT CodeW. Jiang and J.J. Yang 1313
A Fast PSF Calibration Method for Single Lens ImagingW.L. Li, X.Q. Yin, Y. Liu, B. Wang and M.J. Zhang 1317
A Method for Analyzing Clinical Heart Sound Signal Based on Chaotic CharacteristicsM.F. Shen, Z.F. Su, L.L. Sun and L.S. Sun 1321
A Method for Software-Related Safety-Critical Scenarios IdentificationM.X. Jiang and G.H. Jiang 1328
A New Auto-Extraction Algorithm of Lunar Craters for Chang’E Data Based on the SolarIncidence AngleZ.H. Ren, H.K. Jiang, W.L. Du, X.L. Tian and A.A. Xu 1333
A New Auto-Extraction Algorithm of Multi-Size Lunar Craters Based on the Chang’E DataH. Liu, X.L. Tian and A.A. Xu 1340
A New Method for Code OptimizationH. Lin and B.L. Mu 1346
A New Rough Set Model and its ApplicationM.M. Jia, H.Q. Qin, Y.Q. Wang and K.J. Xu 1350
A Novel Blind Source Separation Algorithm for Linear Mixture SignalsW.H. Liu, Y. Zhang, Y.F. Chen, L. Wang and J.C. Liu 1357
l Frontiers of Manufacturing Science and Measuring Technology IV
A Novel Distribution Parameter Fitting Algorithm of Correlation Noise Model forDistributed Video CodingX.Y. Liang, Z.H. Tang, Y.D. Luo and T.F. Qin 1360
A Novel Method of Spike Detection for Interferograms Based on Two-Step FilteringY.P. Zou, C.P. Han, L. Zhang, W.G. Pan and C. Wang 1364
A Novel Overlapping Community Detection Algorithm of Weighted NetworksH.B. You, X.W. Zhang, H.Y. Fu, Z. Zhang, M. Li and X.N. Fan 1369
An Assessment Method of the Data Similarity Considering the Shape Differences of ObjectsZ. Li, G.P. Li and Y.Y. Liu 1374
An Improved Decision Strategy of Network Routing Based on Ant Colony AlgorithmY.B. Jia, Q.Q. Ding, D.L. Liu, Y.L. Zhang and J.F. Zhang 1378
An Improved Error Concealment Technique Based on Multi-View Video CodingH.B. Liu and X.S. Huang 1383
An Improved Frame Loss Concealment Algorithm Based on the Mixed Excitation LinearPredictionQ. Li and F. Tian 1387
Analysis and Simulations of Lensless Imaging with Intensity Correlation MethodX.Y. Li, X. Gao, J. Tang and C.M. Lu 1393
Analysis of Black Level Calibration Algorithm for CISH.T. Yao, Z.Q. Wang, Y.B. Gu and Z.G. Jiang 1397
Application Demand Analysis of Message-Oriented Middleware with Pub/Sub Model onTT&C ComputerC.N. Wang, Z.T. Wang and G. Yuan 1403
Application of C Sharp and MATLAB Mixed Programming Based on .Net Assembly inBlind Source SeparationX. Liang, K.M. Wang and G.Y. Xin 1407
Bayesian Compressive Sensing of Images Based on Effective BlockingY.H. Wu, M.X. Ma, N. Wu and J. Wang 1411
Campus Tracking System Based on IoTY.B. Pi 1416
Candidate Region Detection of Ship Target in Port Based on Electronic MapY.L. Sun, W. Zhou, Y.F. Ling and J.Q. Chen 1420
Car Branding and Communication Strategy Research Based on MicrobloggingX. Hui 1425
Characteristic Study on Carrier Communication Device Noise of Low Voltage Power LinesBased on UPSB. Li, M. Cao, P.F. Huang, Z.Z. Bi, Y.Q. Xiao, C.M. Hong, T. Xie, A.L. Liu, Q. Yang, S.F. Gaoand C. Li 1429
Certificateless Multi-Signcryption Scheme without PairingY. Ding 1435
Chinese Short Text Semanteme Analysis and Emotion Value Quantization AlgorithmY.X. He and Y. Cui 1439
Collaborative Filtering Recommendation Technology Based on Genetic AlgorithmY.B. Jia, Q.Q. Ding, D.L. Liu, J.F. Zhang and Y.L. Zhang 1446
Compressed Sensing Image Reconstruction Based on Improved Particle SwarmOptimization AlgorithmJ. Wang, Y. Liu, W.J. Zhang and K. Li 1453
Computer Network Security Strategy ResearchX.Y. Wan, L. Zhang, W. Xu and H.H. Gong 1457
Construction of Data Association Model in Coal Mines Based on the Application of Internetof ThingsZ.L. Tan and C.L. Zhang 1461
Design and Implementation of FPGA-Based High-Performance Floating Point ArithmeticUnitX.Q. Tang, X. Liu, J.Q. Gao and B. Lin 1465
Design of Ultrasonic Rangefinder Controlled by Single Chip MicrocomputerJ.P. Bia and M.X. Gao 1470
Applied Mechanics and Materials Vols. 599-601 m
Detection and Parameter Estimation for Chirp Signal Based on Fractional FourierTransformX. Chen, M. Tao, T.T. Pan and Y. Li 1474
Detection and Tracking for Anomalous Motion Targets Using Wireless Sensor NetworksJ. Xiong, Z.J. Liu and G.L. Tang 1478
Distance Features of Different Fatigue StateH.B. Xiao and Z.D. Mu 1484
Early Warning of Power Plant Equipment Based on Massive Real-Time Data MiningTechnologyL.K. Zheng, K. Feng, X.Q. Xiao and W.Q. Song 1487
Efficiency Analysis of Different Cooperative Communication Schemes in Wireless SensorNetworksZ.Z. Li, G.M. Li and W. Liu 1491
Enumeration of the Generalized Rook MonoidX.X. Lai, S.K. Ou and S.Z. Luo 1495
ERP Feature of Matching PenniesH.B. Xiao and Z.D. Mu 1499
Estimation of Distribution Algorithm using Two Kinds of Information for SolvingKnapsack ProblemJ. Yu, Y.Y. He and X.H. Feng 1502
Face Recognition Image Processing Design ResearchB. Zhang 1509
Fault Prediction Methods Study of Machinery Based on Optimized Background ValueMGM(1,m) ModelZ.H. Yuan, F. Guo and X.X. Qi 1513
Feature Extraction of Underwater Target Ultrasonic Echo Based on Wavelet TransformZ.L. Wu, J. Li and Z.Y. Guan 1517
Fusion of Visible and Infrared Images Based on Non-Sampling Contourlet and WaveletTransformY.H. Wu, H. Zhang, F.N. Zhang and Y.H. Han 1523
GaAs MMIC Wideband SP8T SwitchC.P. Liu and G.Q. Wang 1527
Hardware Design of Track Circuit in Rail Transit Test System Based on ICL8038C.H. Hu, Y. Chen, B.X. Sun and G.R. Zhai 1531
HD Video Online Recognition Based on DCT Spread Spectrum Watermarking AlgorithmH. Fan, G. Wang, M. Lv, X.X. Wen and Y.P. Zhou 1535
Holography Reconstruction of the AUV Radiated Acoustic Field and the InfluencingFactors AnalysisH.B. Wan, S.J. Zhu, Q.W. He and S.C. Ding 1539
Image Processing and Sparse Resolution for Underwater ImagingX.D. Sun, Z. Zhang and X.W. Zhang 1544
Implementation of CRC in 10-Gigabit Ethernet Based on FPGAB. Li, Z.P. Huang, S.J. Su and J.P. Hu 1548
Improvement of K-Anonymity Location Privacy Protection Algorithm Based on HierarchyClusteringZ.Q. He and G. Chen 1553
Mobile Learning Mode Based on 3GY. Luo and X.Q. Zhang 1558
Modeling and Analyzing of RRC Protocol Process Based on CPNY.N. Sun, Y.M. Liu and S.S. Liang 1562
Motion Comparison Method Combining Segmented Multi-Joint Line Graphs with the SIFTMatching TechniqueM. Zeng, H.L. Ren, Q.H. Meng, C.W. Chen and S.G. Ma 1566
Multi-Channel MKL for Video Human Action RecognitionJ. Ding, Y. Yi, Z.M. Qiu and J.S. Liu 1571
Network Equipment Selection Scheme of University Informatization ConstructionF. Fang and X.G. Luo 1575
n Frontiers of Manufacturing Science and Measuring Technology IV
New Data Processing Method Research on GLONASSZ.J. Liu 1580
Optimal Path Planning of Beidou Navigation System Based on Dijkstra AlgorithmS.K. Wu and J.L. Zhang 1584
Parameter Estimation of Nonlinear Muskingum Models Based on OEPSOB. Li, J.C. Xie and G. Zhang 1588
Prediction of Road Congestion Level Based on Bayes AlgorithmS.B. Xiao 1593
Real Time Message Matching Algorithm for Message-Oriented Middleware with Pub/SubModel on TT&C ComputerC.N. Wang, Z.T. Wang and Z.G. Bao 1597
Receive and Display Beidou Positioning Information Based on MapXS.K. Wu and J.L. Zhang 1601
Recurrence Characteristics Analysis of Near-Surface Wind Speed Signal with DifferentSampling FrequenciesM. Zeng, Z.X. Wu, Q.H. Meng, J.H. Li and S.G. Ma 1605
Research and Simulation of LCMV Algorithm in GNSS Anti-InterferenceZ.L. Bai, J.W. Chen and M. Yang 1610
Research of an IPSec VPN Application in Enterprise NetworkT. Liu 1614
Research of LXI Discovery MethodM. Li 1618
Research of Text Recognition Based on Natural SceneY.B. Zou and Y.M. Chen 1621
Research of Weapon Training Simulator Software Model Based on UMLZ.L. Ma, L.Q. Fang and C.R. Wang 1625
Research on Combined Weight of Target Threat Index of Information FusionK.H. Xu, J.Y. Chen and D.P. Kong 1629
Research on Flight Altitude Information Fusion Method for ADS/INS/GPS IntegratedSystems Based on Federated FilterY.Z. Di, S.C. Wu and Y.P. Zhou 1636
Research on Information Exchange Platform Based-Web Services for TouristZ. Qiang 1640
Research on Information Interactive Model of Automated Demand ResponseB. Qi, K. Wang and J. Li 1644
Research on Limit-Trajectory Over-Modulation Strategy of Two Stage Matrix ConverterJ. Lu and M. Shen 1648
Research on SIFT Matching Algorithm Based on GPUZ.F. Zhan, G. Li and X.H. Zhang 1652
Research on Switch Power Module Parallel Operation SystemS.Z. Liu 1657
Research on the Application of Cloud Computing in the Field of Archives InformatizationF.L. Zhang 1661
Research on the Performance Test of Wired/Wireless Heterogeneous Industrial ControlNetworkL.Q. Wu and S. Xu 1665
Research on Vague Set of Target Threat Information Fusion AlgorithmK.H. Xu, J.Y. Chen, D.P. Kong and P. Fan 1671
Research on Wireless Network Traffic Modeling Based on Channel StateX.Y. Xu, X.M. Ye, Y.J. Zhu, Y.J. Dai, X.S. Li and Z.Z. Gong 1679
Research on XML Documents and Relational Database Mapping Based on XML SchemaX. Zhou 1683
Simulation of Clouds Dynamics Based on the Change of Sight DistanceX.L. Fan, L.M. Zhang and Y.F. Yu 1688
Small Quantities of Cargo Transportation Route Selection Base on Minimum SpanningTree AlgorithmH.Y. Yu, J.L. Ke and M.T. Li 1692
Applied Mechanics and Materials Vols. 599-601 o
Smart Meter Based on Smart Energy Profile for ZigBee and Power Line CommunicationConnectivity-Enabled Home Area NetworkP. Yao, G. Liu and Y. Liu 1696
Software Design for Micromouse Special NavigationH.M. Zhang, L.S. Peh and Y.H. Wang 1700
Software Design for Micromouse Straight Path NavigationH.M. Zhang, L.S. Peh and Y.H. Wang 1704
Solid Rocket Motor Finite Element Analysis Based on the Reverse Modeling of ICT ImagesP. Li, H.M. Zhou, H.Y. Lu, M. Zhu and Q.G. Chen 1708
Solitary Wave Solutions, Periodic Wave Solutions and Folded Localized Excitations for theDissipative Zabolotskaya-Khokhlov SystemQ.B. Ren, S.H. Ma and J.P. Fang 1712
Speaker Recognition TechniquesF. Zong 1716
Study of Archives Information Development Based on SWOT AnalysisF.L. Zhang 1720
Study of Steady-State Kalman Filtering Based on Thresholding Optimal GainT.X. Guo and Y. Wang 1724
Study of the Simultaneous Generation of UWB Doublet and Triplet Signals Based onNonlinear Effects of SOAX.Q. Chen, Y.C. Zhang and L. Tang 1729
Study on Synthetic Aperture Radar Image Denoising AlgorithmW.F. Chen, A.L. Liu, J.J. Xia, C.L. Duan, S.S. Yang and W.C. Hu 1734
Study on the Method of Vibration Signal De-Noising Using Wavelet Packet Based on QPSOK. Zhao, B.W. Li and J. Chen 1738
Summary and Expectation of Synthetic Aperture Imaging towards High-Orbit ObjectsX.Y. Li, X. Gao, J. Tang and C.M. Lu 1745
Text Clustering Algorithm of Co-Occurrence Word Based on Association-Rule MiningC.X. Jin, H. Zhang and Q.C. Bai 1749
The Analysis of Steganographic by Sub-Pixel CalibrationQ. Chen, J.X. Hong, G. Ou, X. Chen, L. Wang and Y.X. Zhang 1753
The Combination Views of Privacy-Protection in the Mobile DatabaseX.N. Liu, W.J. Wang, S.Z. Zhao and G.L. Lin 1757
The Design and Realize on the Circuit Board of High-Speed Image Acquisition SystemY. Tian, J.J. Li, J.H. Lu and S.S. Cui 1760
The Differences Analysis of Input-Output Efficiency of Regional R&D Activities Based onDEAY.H. Liu, Y.B. Lv and Y. Ren 1764
The Exploration and Implementation of the Interactive Multimedia Network AutonomousLearning PlatformS.B. Xiao 1768
The Optimization and Application of Kriging Model Based on Quantum-Behaved ParticleSwarm OptimizationY. Zhao, B.W. Li, Y. Zhang and Y.F. Chen 1772
The Solution to Node Importance in Complex Networks Based on PageRank AlgorithmG.L. Li, H. Li, Y.R. Wang and T.B. Zhang 1777
The Study of a Fingerprint Encryption Code ModelY.B. Jia, D.L. Liu, Q.Q. Ding, J.F. Zhang and Y.L. Zhang 1781
The Study of Harmonic Suppression and Reactive Power CompensationY.J. Liu and X.W. Zhang 1785
The SWOT Analysis of the Application of Cloud Computing to Archives InformatizationF.L. Zhang 1789
Topological Structure - Based Rough Sets and Rough LogicY.L. Zheng 1793
Ultra-Low Frequency Difference Signal Multiplication Based on PLLM.R. Zhang, K.C. Song and L.Y. Ye 1797
p Frontiers of Manufacturing Science and Measuring Technology IV
Uncertainty Evaluation of Duration of Aircraft DC Transient Signal Based on Least SquareMethodP.Z. Ouyang, Z.H. Zhang and J.Y. Sun 1801
University Employment Information Integration Model Based on Cloud ComputingZ.Q. He, D.X. Meng and X.M. Zhao 1807
Wavelet-Based Adaptive Detection of Magnetic Anomaly Signal Contaminated by 1/f NoiseX.H. Nie, Z.M. Pan, D.S. Zhang and W.N. Zhang 1812
Weakness and Improvement of an Efficient Key Agreement ProtocolS.Q. Liu, L. Xia, M.Z. Zhang and B.L. Xie 1816
Wideband SPDT Switch With TTL ControlG.Q. Wang and C.P. Liu 1820
Comparison and Improvements of Feature Extraction Methods for Text CategorizationJ. Wang, Z.X. Zhang and Y.D. Wang 1824
A Discriminative Method for Pedestrians Detection on Real-Time VideoX.Y. Chen, X.F. Lv and J. Liu 1829
Research on the Iterative Stopping Criterion Based on Linear Turbo EqualizationA. Yao and Z.L. Chen 1833
Big Data Reasearch on Smart Phone Unlock CrackW.J. Xu 1838
Corneal Image Analysis and Information Management System Based on Slit LampM. Xu and Y.F. Li 1842
Design and Implement of a Computer Forensics Model for Cloud EnvironmentsH.Y. Chen 1848
Design of Wave/Tide Simulate Apparatus’ Control Software Based on Free PortCommunication ProtocolJ. Guo, S. Ye, X.L. Wang, X.H. Ma and T. Su 1852
Image Decomposition and Inpainting Based on Besov and Hilbert-Sobolev SpaceZ.Q. Liu 1857
iMRAproiri: A Parallel Aproiri Algorithm Based on TwisterL. Huang and Z.J. Liu 1863
Research on Industrial Control Network Webstation DesignW.J. Xu 1868
Research on Bandwidth Allocation of Multimedia Communication System Based onInternet of ThingsH.D. Yang and Z.L. Ren 1871
Research on Design of Network CurriculumY. Luo and X.Q. Zhang 1875
Information Communication Technology Applications for World Heritage SiteManagementW.Y. Zhang 1879
The Diagnosis Research of Cover Sheet Spring Recover on the Compensate Fuzzy NerveNet of Multi-Input DeferZ.J. Liu 1883
The Performance Evaluation of the External Effect of Regional Logistics InformationPlatformH.Y. Teng, H.L. Lu and Y.H. Gao 1887
Novel Algorithm for Calibrating Speed-Density Model Parameters in Mesoscopic TrafficSimulatorX.L. Li, W.W. Song and Z. Jiang 1891
Design and Realization of Collaborative Simulation on VRNET and VR-Forces CrossPlatformG.H. Zhang, X. Li, W.G. Zhang and J.K. Yang 1897
Optimization of Maintenance Equipment Tool Types Based on Triangle Fuzzy NumberL.J. Deng, Z.H. Cheng, Y.B. Wang and Z.Y. Yang 1901
System Mechanism of Small IOT System - Taking the Openhab Project as an ExampleL.J. Zhong, J.Z. Zhao and W.H. Dai 1906
The Application of Tolerance Database in the Secondary Development of SolidWorksQ.Q. Chang, X.M. Li and H.W. Zhou 1910
Applied Mechanics and Materials Vols. 599-601 q
A Novel Cluster Selection Algorithm in the NIDS of Wireless Ad HocX.H. Li and Z.Y. Liu 1914
A Novel Nonlinear Time Series Prediction Method and its Application in StructuralVibration Response PredictionY. Lin, H.S. Yan and B. Zhou 1918
A Solution of Designing Remote Video Conferences Based on ARM11Y. Yu, X. Li and H.J. Wang 1922
Analysis and Simulation to the Anti-Jamming Performance of the CCSK Soft SpreadSpectrum SystemH.L. Li, J.H. Huo, J.L. Wu and J.K. Yang 1925
Consensus Analysis for a Class of Heterogeneous Multi-Agent Systems in Directed GraphY.J. Sun, G.L. Zhang and J. Zeng 1930
The Application of Multimedia Video Technology in 3D Table Tennis GamesS.B. Xiao 1934
Optimal Power Flow Solution Using the Harmony Search AlgorithmP. Ren and N. Li 1938
Power Harmonic Analysis System Based on Virtual InstrumentW. Chen, W.F. Shi and L. Chen 1942
Reconfigurable Virtual Instrument Test System Research Based on Mobile PlatformX.K. Song, P.F. Song and P.J. Zhang 1946
Replacement of the Power Generation Unit and Benefit Allocation Model Based on thePower Generation PerformanceH.T. Yue, D.X. Peng, M.F. Huang and Z.F. Tan 1950
Research and Improvement about LEACH Algorithm for Wireless Sensor NetworksT. Liu and S.M. Jia 1954
Research on Diffuse Optical Tomography System in Frequency DomainT.L. Hou and B. Fang 1960
Research on Remote Sensing Image Geometric Correction Method and Precision AnalysisX.L. Liu 1967
Short-Term Wind Speed Prediction on Base of Improved Least Squares Support VectorMachineZ. Zhao, L.X. Zhang, H.T. Liu and Z.R. Liu 1972
Study of Convective Heat Transfer Coefficient of High Pressure Water DescalingP. Gao 1976
Study on Flood-Fill Algorithm Used in Micromouse Solving MazeH.M. Zhang, L.S. Peh and Y.H. Wang 1981
Study on the Wrapping Error of GREEN’s Function Sampled in K SpaceB. Tang, Z.B. Zhang, S.X. Tang, G.P. Liu and J. Gao 1985
Status and Prospect of Disassembly Process of Electronic Components on Waste PCBsP.L. Li, Y.F. Shi and D.W. Liu 1989
Getting the Health Management Information System BuildingY.F. Zhou 1993
Analysis for Position Selection of Hinged Point in a Forestry Transportation ArticulatedVehicleX.P. Jia, S.G. Fan, K.L. Yu and J. Ma 1997
Chapter 5: New Technologies in Education and Sports
Research of the Experimental Teaching about IPSec Protocol Based on Transport PatternT. Liu 2003
Research on Practice Teaching of Civil Engineering on the Basis of the Student CompetitionC.H. Gao 2007
Cross-Cultural Awareness in College English TeachingB. Liang 2011
Research on “Two Labs and Two Centers” Art and Design Practice Teaching ModeY. Guan and Z. Chen 2014
r Frontiers of Manufacturing Science and Measuring Technology IV
Study on Students’ Network Moral EducationA. Wang and X.Q. Zhang 2018
The Application of Information Technology in the Fine Arts Teaching and ImplementationY.Q. Huang 2022
The Economic Analysis on the Special Education Teachers in Human CapitalX.L. Lei 2026
The Innovation of the Construction of Style of Study of Connotative Development of HigherEducationJ.F. Du 2030
The Research on the Core System of AthleticsY.J. Wang 2033
Discussion on Research Learning under the Network EnvironmentL.H. Huang and B. Gui 2036
Research and Practice of Teaching Reform of Wireless Network Technology Course forInternet of Things SpecialtyH.D. Yang 2040
Research on the Reform of Metallurgical Engineering Practice TeachingW.Q. Yang, J. An, X.L. Yuan and W.T. Xia 2044
Study on the Cultural Construction of College ArchivesA. Wang and X.Q. Zhang 2048
On the Design and Development of Micro-CourseL.H. Huang and B. Gui 2052
The Design and Realization of Online Submitted System of Graduation Design DocumentsX. Zeng and Y. Sima 2056
Chapter 6: Management Engineering, Business and EconomicsEngineering
An Investigation of Electronic Logistics Management in the Taiwanese Textile Industry:Using Everest Textile as an ExampleY.T. Huang, S.H. Chan and F.Y. Liu 2063
Analyses the Mechanical Equipment Management and MaintenanceC.Q. Leng and Y.L. Huang 2066
Application of Lean Quality Management in Heat Treatment Industry - An Example ofEnterprise NX.M. Du, W. Lei, J.Y. Ding and N.J. Wang 2070
A Modified Exponential Smoothing Model for Forecasting Per Capita GDP in YunnanMinority AreaZ.S. Dong and G.S. Zhu 2074
A Study on CPFR Inventory Management TechnologyP. Zhang and A.Q. Yuan 2079
A Traffic Capacity Model of Lane OccupationY.X. He 2083
An Empirical Study on Exponential Smoothing and Seasonal ModelH. Lin and B.L. Mu 2088
Based on Geographic Information System of Tourism Resources and Circuit ManagementSystem Design and ImplementationH.H. Yang 2092
Design and Implementation of Room Management System of Hotel Based on J2EEC.J. Dong 2096
Design and Implementation of Storage Management System Based on JavaY.X. Liu, Z.H. Yuan and W. Shi 2100
Design and Implementation of University Administrative Management SystemC.Y. Yang 2104
Design of Prognostics and Health Management System for Turbofan EngineH.Q. Song, B.W. Li, T. Sun and Y.H. Wang 2108
Applied Mechanics and Materials Vols. 599-601 s
Fuzzy Comprehensive Evaluation on Human Resource Management Risk Warning ModelY.L. Dai 2112
Material Selection and Management Based on CyberneticsY. Guan and Z. Chen 2116
Research on Episode Segmentation for MIS WorkflowF.L. Ye and G.L. Shi 2120
Research on Purchase Intention Models of Seamless Underwear ConsumersJ.P. Wang, H. He and J. Chen 2125
Risk Assessment and Countermeasures of Occupational Fraud Conduct in CorporateConstruction ProjectsY.L. Dai and L. Chen 2130
Team Organization Model and its Algorithm for a Project under Complex ConstraintsX.Y. Zhu, K.H. Hou and C. Chen 2134
The Comparative Study on Urban Transport and Urban Agglomeration TransportZ.Y. Wang, C.B. Li and Y. Zhang 2139
The Theory of Economic Law to the Construction of Harmonious Society in our CountryValue AnalysisX. Long 2145
The Urban and Rural Public Transit Demand Analysis in HohhotC.B. Li, Y. Zhang and R.X. Guo 2149
University Personnel Management System Construction and ImplementationT. Ge 2153
Design Research on Computer Logistics Information Management SystemJ.S. Song 2157
Economic Analysis on Space Truss Structure under Different Specific ConditionsH. Li and M.Q. Zhou 2160
Research of the Store Image Based on Wechat Public PlatformY.J. Zhu and G. Ke 2164
Stakeholder Analysis of EV Spread in ChinaR. Liu, Y.H. Wu and R. Li 2168
The Background and the International and Domestic Impact of 'General Data ProtectionRegulation'Z.L. He, D.L. Huang and Y.T. Lei 2173
The Design and Application of All-Areas and Best Traversal Algorithm Based on UniformPoints on Scene CheckW. Lv 2178
The Legislative Reference on Software Vulnerability of Foreign Critical InfrastructureZ.L. He and L.B. Zhong 2182
Bound of Local Risk Minimization Estimation on gλSpaceY.C. Bai 2188
Computer Database System in the Application of Information ManagementX.D. Luan 2194
The Library Information Management System Analysis and DesignT.T. Lu 2198
Modeling the Influence of Design Modification on Product Development Projects Based onStructure MethodsQ. Yang and Z.L. Liu 2202
Theoretical Framework for Innovation Design with Optimised CustomizationH.H. Wang and Q.P. Yang 2206
Research of State Assessment for UAV Based on FAHPZ.Y. Gu and X.M. Li 2210
The Design of Operation and Maintenance Management System about IT Platform Basedon TivoliF.S. Shi, Y. Zhou and P. Shi 2215
Simulation Modeling of Post-Earthquake Vaccine Cold-Chain Emergency TransportationBased on ExtendSimH.Y. Yu, R. Zhang and S.Y. Li 2220