Download - Telus V1000H Manual
VDSL2/GigE
Wireless 11nGatewayModel #: V1000H
User ManualVer 1.0
Solutions for the Digital Life™
i
Table of Contents
Introduction 1Minimum System Requirements 1Features 1Getting to Know the Gateway 3
Using the Home Screen 7Accessing the Home Screen 7Icon Bar 9General Information 10Connection Status 11Home Network 12Firewall/Diagnostics 13
Configuring Wireless Settings 14Accessing Wireless Settings 14Basic Settings 16Advanced Settings 19WPS 21Wireless MAC Authentication 23
Configuring Firewall Settings 25Accessing Firewall Settings 25Firewall 27Port Forwarding 28Applications 29DMZ Hosting 31UPnP 32
Configuring Advanced Setup 33Accessing Advanced Setup 33Services Blocking 35Website Blocking 36Scheduling Access 37DHCP Reservation 38Admin Password 39Rebooting the Gateway 40Restoring Factory Default Settings 40
i
ii
Table of Contents
ii
Ping Test 42Traceroute 43Time Zone 44
Viewing the Gateway’s Status 45Accessing Status Tables 45Connection Status 47xDSL Status 48WAN Ethernet Status 49Routing Table 49Firewall Status 50NAT Table 50Wireless Status 51Modem Utilization 52LAN Status 53
Specifications 54General 54Wireless Operating Range 55LED Indicators 55Environmental 55
Notices 56Regulatory Compliance Notices 56Modifications 56GPL (General Public License) 57
Limited Warranty 58
1
Introduction
Thank you for choosing the VDSL2/GigE Wireless 11n Gateway. With its powerful wireless N radio, gigabit Ethernet switch, and WAN port, as well as its dual-core processor and support for HPNA, the Gateway will propel you to new speeds as you traverse the Internet. We are sure the Gateway will provide you with years of hassle-free performance.
Minimum System RequirementsActive ADSL2+ service
Computer with an 10 Mbps or 10/100/1000 Mbps Ethernet connection
Microsoft Windows 2000, XP, Vista; Mac OS 7.1+, 8.0+, 9.0+, OS X+
4.0 or higher (54.0 or higher (4.7+
TCP/IP network protocol installed on each computer
Features
Optional Java Virtual Machine and Java Runtime software
TR-069 support with remote management
1
2
VDSL2/GigE Wireless 11n Gateway
TR-064 local management
64-, 128-, and 256-bit WEP/WPA/WPA2 wireless LAN security
IEEE 802.3 Ethernet standard compliance
Web-based configuration support
Web download support
802.11b/g/n support
WPS support
Advanced firewall
ALG
3
Chapter 1 Introduction
Getting to Know the GatewayThis section contains a quick description of the Gateway’s lights, ports, etc. The Gateway has several indicator lights (LEDand a series of ports and switches on its rear panel.
Front Panel
The front panel of the Gateway features 11 LEDs: Power, DSL, Internet, WAN
4
VDSL2/GigE Wireless 11n Gateway
PowerThe Power LED displays the Gateway’s current status. If the Power LED glows steadily green, the Gateway is receiving power and fully operational. When the Power LED is rapidly flashing, the Gateway is initializing. If the Power LED is glows red when the Power cord is plugged in, the Gateway has suffered a critical error and technical support should be contacted.
DSL The DSL LED illuminates when the Gateway is connected to an ADSL line.
WAN Ethernet When the WAN Ethernet LED glows steadily, the Gateway is connected to an Ethernet WAN. When it flashes, it signifies that data traffic is traveling across the connection.
Internet When the Internet LED glows steadily, the Gateway is connected to the DSL provider. When it flashes, the Gateway’s built-in DSL modem is training for the DSL service.
LAN EthernetThe LAN Ethernet LEDs illuminate when the Gateway is connected to another device via one of its LAN Ethernet ports.
HPNA The HPNA LED illuminates when the Gateway is connected to another device via its HPNA port.
USB
will provide functionality.
5
Chapter 1 Introduction
WirelessThe Wireless LED illuminates when the Gateway is connected wirelessly, assum-ing the Gateway’s Wireless feature is turned on.
WPS Button
Rear Panel
The rear panel of the Gateway features 8 ports (Line, HPNA, LAN Ethernet, WAN
43
21
LAN
WAN
Ethernet Cable(from LAN Ethernet Port
to Computer/Device)
Ethernet Cable(from WAN Port
to ISP Connection)
Power Adapter(from Power Port
to Wall Outlet)
Coaxial Cable(from Coax Portto Set Top Box)
USB1
USB Cable(from USB Port
to Device)
USB
HPNA
LineReset Power
Line PortThe Line port is used to connect the Gateway to a telephone line connection.
HPNA PortThe HPNA port is used to connect the Gateway to an HPNA connection via
6
VDSL2/GigE Wireless 11n Gateway
LAN Ethernet Ports (4)The LAN Ethernet ports are used to connect computers to the Gateway via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports, and either a straight-through or crossover Ethernet cable can be used when con-necting to the ports.
WAN Ethernet PortThe WAN Ethernet port is used to connect the Gateway to a WAN via an Ethernet cable.
USB Port
Reset Switch Depressing the Reset switch for one second will restore the Gateway’s factory default settings. To reset the Gateway, depress and hold the Reset switch for
ten seconds. The reset process will start after releasing the switch.
Power PortThe Power port is used to connect the Power cord to the Gateway.
WARNING! Do not unplug the Power cord from the Gateway dur-ing the reset process. Doing so may result in permanent damage to the Gateway.
7
Using the Home Screen
This chapter gives a short overview of the Home screen of the Gateway’s firmware,
Accessing the Home ScreenTo access the Home screen:
1. http://192.168.1.254 then press Enter on the keyboard.
2
8
VDSL2/GigE Wireless 11n Gateway
2. The Gateway’s Home screen appears.
3.Login.
9
Chapter 2 Home Screen
4. You can now access all of the Home screen’s options.
Icon BarAt the top of the Home screen is the Icon Bar. Here, you can quickly access the other four main sections of the Gateway’s firmware by clicking on the appropriate
Home screen.
10
VDSL2/GigE Wireless 11n Gateway
General Information
This section is divided into three subsections: Summary, Product Info, and Login Status.
Summary
The Summary subsection contains four status lines. Broadband displays the status
-
displays how long the DSL link has been active.
Product Info
The Summary subsection contains four information lines. Model# displays the model number of the Gateway. Serial# displays the serial number of the Gateway.
Gateway’s firmware version number.
Login Status
The Login Status subsection displays whether you have logged into the Gateway’s
If you are logged in, you can log out by clicking Log Out.
11
Chapter 2 Home Screen
Connection StatusThis subsection of the Home screen displays the status of various parameters regarding the Gateway’s wired and wireless networks.
This section contains two subsections: WAN Connection Status and Wireless.
WAN Connection Status
The WAN Connection Status subsection contains a number of status lines that
Lease Time Remaining, DNS Address #1, and DNS Address #2.
Wireless
The Summary subsection contains three information lines. SSID displays the name of the Gateway’s wireless network. Security displays whether the wireless network has security enable. Security Type displays the type of security enabled.
12
VDSL2/GigE Wireless 11n Gateway
Home NetworkThis section of the Home screen details the devices connected to the Gateway’s
address and the speed of the connection.
13
Chapter 2 Home Screen
Firewall/DiagnosticsThis subsection of the Home screen displays the status of various parameters regarding the Gateway’s firewall, as well as list of diagnostics tests.
Firewall
chapter 4 of this manual.
Diagnostics
14
Configuring Wireless Settings
firmware, including setting up wireless security and WPS.
Accessing Wireless SettingsTo access the Wireless screens:
1. http://192.168.1.254 then press Enter on the keyboard.
3
15
Chapter 3 Wireless Settings
The Gateway’s Home screen appears. Enter your user name and password, 2. then click the Wireless Setup icon from the row of icons at the top of the screen.
The Wireless Settings screen appears, with various options listed in the menu 3. on the left side of the screen.
16
VDSL2/GigE Wireless 11n Gateway
Basic SettingsClick Basic Settings from any Wireless screen to generate the Basic Settings screen. This screen displays a series of settings relating to the core functionality of the Gateway’s wireless capabilities.
Wireless Radio
Click in the Enable radio button to activate the Gateway’s wireless radio. Clicking in the Disable radio button turns off the wireless radio.
Select SSID
SSID State
Enable or disable this option, which activates the Gateway’s ability to use multiple SSIDs, by clicking in the appropriate radio button.
17
Chapter 3 Wireless Settings
SSID Broadcast
Click in the Enable radio button to activate SSID broadcasting, which allows any computer searching for available wireless networks to detect this network (how-ever, if this network is protected with some form of wireless security, they will not
the Disable radio button turns off SSID broadcasting.
SSID Name
Security
There are four choices available in this drop-down list:
WPA/WPA2This form of wireless security is the default setting on the Gateway. When select-ed, you can select the WPA Type (WPA orWPA2-Personal, WPA Personal, or
Gateway’s automatically generated default key/passphrase, or create one of your own, then click Apply to save your changes.
18
VDSL2/GigE Wireless 11n Gateway
WEPWEP stands for Wired Equivalent Privacy. To use WEP, select it from the
passphrase, or create one of your own (the more keys used, the stronger the Apply to save your changes.
WEP + 802.1x
-tion purposes. This server must be physically connected to the Gateway. Also,
1.
2.
19
Chapter 3 Wireless Settings
3.
4.
Click 5. Apply to save your changes.
OffSelecting Off from the Security drop-down list leaves the Gateway’s wireless net-work completely open, allowing anyone to join the network.
Advanced SettingsClick Advanced Settings from any Wireless screen to generate the Advanced Settings screen.
this screen, click Apply to save them.
20
VDSL2/GigE Wireless 11n Gateway
Compatibility Mode
Allows you to modify the Gateway’s wireless network to allow certain devices to join, based on the device’s compatibility. Choices include Compatible Mode
802.11b only.
Maximum Spatial Streams
Spatial streams boost the efficiency of the wireless network, resulting in higher speeds across the network. However, the more spatial streams you use, the less sta-ble the wireless network connections. Choices include Auto (adjusts spatial streams
Channel Width
Choices include 20 Mhz and 40 Mhz.
Control Channel
MSDU Aggregation, MPDU Aggregation
Enable or disable these options by selecting the appropriate choice from the drop-down lists. They should only be changed if requested by your ISP.
WMM, WMM Power Save
Enable or disable these options by clicking in the appropriate radio buttons.
21
Chapter 3 Wireless Settings
Channel
Select the channel at which the Gateway’s wireless network operates. Choices include channels 1 through 11, and Auto Detect, which allows devices on the net-work to automatically detect the channel.
Wireless Power Level
Adjust the power of the Gateway’s wireless network signal by selecting a percentage from 10% to 100% from the drop-down list
WPSClick WPSscreen. WPS provides a simple method of setting up a wireless network by auto-matically sharing the network key between the Gateway and other wireless devices.
22
VDSL2/GigE Wireless 11n Gateway
To set up WPS:
Enable WPS by clicking in the Enable radio button.1.
Click 2. Apply to save your changes.
If connecting a device to the wireless network with a WPS AP PIN, write down 3. the PIN displayed after Current WPS AP Pin, then enter the PIN in the device’s WPS AP PIN configuration.
If connecting a device to the wireless network with PBC (Push Button 4. Connect, then press the PBC-compatible button on
the device within two minutes.
If the connecting device uses the End Device PIN method, enter the PIN in the 5.
23
Chapter 3 Wireless Settings
Wireless MAC AuthenticationClick MAC address control in any Wireless screen to generate the Wireless MAC Authentication screen. MAC addresses are alphanumeric designations provided to
can allow or deny access to the Gateway’s wireless network to the wireless devices of your choice.
To set up wireless MAC authentication:
Select the SSID from the SSID drop-down menu.1.
2. MAC Authentication.
To allow or delete certain devices from the Gateway’s wireless network, click in 3.
24
VDSL2/GigE Wireless 11n Gateway
Enter the device’s MAC address by either selecting it from the Select MAC 4. Address drop-down list, or manually entering it in the Manually Add MAC
Click 5. Apply to save your changes.
Repeat steps 1-5 to add more devices.6.
25
Configuring Firewall Settings
Gateway’s firmware, including various firewall options, port forwarding, and DMZ hosting.
Accessing Firewall Settings
1. http://192.168.1.254 then press Enter on the keyboard.
4
26
VDSL2/GigE Wireless 11n Gateway
The Gateway’s Home screen appears. Enter your user name and password, 2.
3. on the left side of the screen.
27
Chapter 4 Firewall
FirewallClick Firewallscreen allows you to configure the firewall settings of the Gateway. If you make changes in this screen, click Apply at the bottom of the screen to save them.
WAN Ping Block Mode
WAN Ping Block Mode. This will block all pings originating from the WAN (i.e.,
IP Addressing Type
This option is non-configurable and always set to All Dynamic IP Addresses.
28
VDSL2/GigE Wireless 11n Gateway
Firewall Security Level
Select the level of firewall security level here, by clicking in the appropriate radio but-ton. None provides no firewall security, while Low, Medium, and High provide differ-
Additionally, after choosing a level of firewall security, you can manually allow (by
Port Forwarding
certain limited and controlled ways, enabling some applications to work from the
Internet access to servers in the local network. Click Port Forwarding from any
configure the port forwarding settings of the Gateway. If you make changes in this screen, click Apply at the bottom of the screen to save them.
29
Chapter 4 Firewall
To set up port forwarding
1.
2.
3.
4.
If applicable, enter the remote port and IP information5.
Click 6. Apply to save your changes.
at the bottom of the screen.
ApplicationsClick Applications
and easily set up commonly-used applications that require port forwarding
30
VDSL2/GigE Wireless 11n Gateway
To set up a forwarded application:
Select a networked device by selecting it from Select Device drop-down list, or 1.
Select the application’s category from the Application Category drop- 2. down list, or select All to see all the applications provided.
Select the application from the Applications drop-down list.3.
If desired, view the rule by clicking the View Rule button. A new screen 4. appears, listing the application’s port forwarding details. Click Back to return to the Applications screen.
Click 5. Apply to save your changes.
Repeat steps 1-5 to configure additional applications.6.
List at the bottom of the screen.
31
Chapter 4 Firewall
DMZ HostingClick DMZ Hosting
operate outside the firewall to use an Internet service that otherwise would be blocked,
Caution! A DMZ host is not protected by the firewall and may be vulnerable to attack. Designating a DMZ host may also put other computers in the local network at risk. When designating a DMZ host, consider the security implications and protect it if necessary.
To designate a local computer as a DMZ host:
Click in the Enable radio button to activate DMZ hosting.1.
Select a networked device by selecting it from Select Device drop-down list, or 2.
Click 3. Apply to save your changes.
The DMZ host will be displayed in the DMZ Hosted Device table at the bottom of the screen. Only one device at a time on the Gateway’s network can be designated as a DMZ host.
32
VDSL2/GigE Wireless 11n Gateway
UPnPClick UPnP
Gateway’s network, click in the Enable radio button, then click Apply.
33
Configuring Advanced Setup
the Gateway’s firmware, including services blocking, restoring the Gateway to fac-tory default settings, and performing a ping test.
Accessing Advanced SetupTo access the Advanced Setup screens:
1. http://192.168.1.254 then press Enter on the keyboard.
5
34
VDSL2/GigE Wireless 11n Gateway
The Gateway’s Home screen appears. Enter your user name and password, then 2. click Advanced Setup from the row of icons at the top of the screen.
The Advanced Setup screen appears, with various options listed in the menu 3. on the left side of the screen.
35
Chapter 5 Advanced Setup
Services BlockingServices blocking is used to prevent a device on the Gateway’s network from accessing particular services available on the Internet, such as receiving email or
networked device:
Click 1. Services Blocking from the menu on the left side of any Advanced Setup screen. The Services Blocking screen appears.
Select the device on which you wish to block services from the Select Device 2.
Select a service, or multiple services, to block by clicking in the appropriate 3.
Click 4. Apply to save your changes.
Repeat steps 1-4 to block services on another device on the Gateway’s network.5.
The devices that are blocked from accessing services are listed at the bottom of the screen.
36
VDSL2/GigE Wireless 11n Gateway
Website BlockingWeb site blocking is used to prevent all devices on the Gateway’s network from accessing particular web sites on the Internet. To set up web site blocking on the Gateway’s network:
Click 1. Website Blocking from the menu on the left side of any Advanced Setup screen. The Website Blocking screen appears.
Enter the web site address of the web site to be blocked in the Website Address 2.
Click 3. Apply to save your changes.
Repeat steps 1-3 to block other web sites from being acesssed on the 4. Gateway’s network.
The web sites blocked from being accessed on the Gateway’s network are listed at the bottom of the screen.
37
Chapter 5 Advanced Setup
Scheduling AccessScheduling access is used to allow a device on the Gateway’s network to access the Internet at certain times of the day, or certain days of the week, only. During times not configured in the Scheduling Access screen, the device will not be able to access the Internet. To set up scheduling access on a networked device:
Click 1. Scheduling Access from the menu on the left side of any Advanced Setup screen. The Scheduling Access screen appears.
Select the device on which you want to scheduled Internet access from the 2. Select Device drop-down list, or enter the device’s MAC address in the Enter
Select the days of the week during which you want to allow Internet access by 3.
If applicable, set the time range during which you want to allow Internet access. 4. This time range will apply only to the days you activated in step 3.
38
VDSL2/GigE Wireless 11n Gateway
Click 5. Add to create a schedule access.
Repeat steps 1-5 to create multiple access schedules for other devices on the 6. Gateway’s network.
The devices that are configured with an access schedule are listed at the bottom of the screen.
DHCP ReservationDHCP reservation allows devices on the Gateway’s network to be permanently associated with a particular IP address. To set up DHCP reservation on a net-worked device:
Click 1. DHCP Reservation from the menu on the left side of any Advanced Setup screen. The DHCP Reservation screen appears.
Select the MAC address of the device on which you want to reserve a perma-2. nent DHCP address from the Select MAC Address drop-down list, or enter the
Select the IP address you want to permanently associate with the device cho-3. sen in step 2 from the IP Address drop-down list, or enter an IP address in the
39
Chapter 5 Advanced Setup
Click 4. Apply to save your changes.
Repeat steps 1-4 to reserve IP addresses for other devices on the 5. Gateway’s network.
The devices with DHCP reserved IP addresses are listed at the bottom of the screen.
Admin PasswordTo change the password that allow access to the Gateway’s firmware screens:
Click 1. Admin Password from the menu on the left side of any Advanced Setup screen. The Admin Password screen appears.
En2.
3.
4.
Click 5. Apply to save your changes.
40
VDSL2/GigE Wireless 11n Gateway
Rebooting the GatewayTo reboot the Gateway:
Click 1. Reboot from the menu on the left side of any Advanced Setup screen. The Reboot Modem screen appears.
Click 2. Reboot to reboot the Gateway. This may take up to one minute.
To reenter the Gateway’s firmware after restarting the Gateway, click the web browser’s Refresh button.
Restoring Factory Default SettingsIf the Gateway’s factory default settings need to be restored (to build a new net-
Click 1. Restore Defaults in any Advanced Setup screen. The Restore Defaults screen appears.
41
Chapter 5 Advanced Setup
If you want to restore only the Gateway’s default wireless settings, click 2. Restore across from Restore Default Wireless Settings. The Gateway’s current wireless settings will be deleted, and the factory default wireless settings restored.
If you want to restore only the Gateway’s default firewall settings, click 3. Restore
settings will be deleted, and the factory default firewall settings restored.
If you want to restore all the Gateway’s default settings, click 4. Restore across
default settings restored.
Note: All of the Gateway’s settings and parameters will be restored to their default values after performing the Restore
password; the user-specified user name and password will no longer be valid.
42
VDSL2/GigE Wireless 11n Gateway
Ping TestSelecting Ping Test from any Advanced Setup screen generates the Ping Test screen, which is used to check whether the Gateway is properly connected to the
displayed at the bottom of the screen.
43
Chapter 5 Advanced Setup
TracerouteSelecting Traceroute from any Advanced Setup screen generates the Traceroute screen, which is used to determine the route taken by packets across a network.
at the bottom of the screen.
44
VDSL2/GigE Wireless 11n Gateway
Time ZoneTo set the correct time zone on the Gateway:
Click 1. Time Zone from the left side of any Advanced Setup screen. The Time Zone screen appears.
Click in the appropriate radio button for your time zone.2.
If da3. to activate
Click 4. Apply to save your settings.
45
Viewing the Gateway’s Status
This chapter gives an overview of the various Status tables provided by the -
tions, WAN Etherent connection, and wireless status.
Accessing Status TablesTo access the Status screens:
1. http://192.168.1.254 then press Enter on the keyboard.
6
46
VDSL2/GigE Wireless 11n Gateway
The Gateway’s Home screen appears. Enter your user name and password, 2. then click Status from the row of icons at the top of the screen.
The Status screen appears, with various options for checking the Gateway’s 3. status listed in the menu on the left side of the screen.
47
Chapter 6 Status
Connection StatusClick Connection Status from any Status screen to generate the Connection Status screen. This table displays various parameters regarding the Internet con-nection of the Gateway, including broadband and ISP connection status, upstream rate, least time remaining, and DNS addresses. The only user-configurable option in the screen is the Release/Renew button, which, when clicked, releases and renews the Gateway’s IP address.
48
VDSL2/GigE Wireless 11n Gateway
xDSL StatusClick xDSL Status
including VPI, downstream speed, and attenuation. There are no user-configurable options in this screen, but there is a Clear button at the bottom of the screen (not
begin accumulating again.
49
Chapter 6 Status
WAN Ethernet StatusClick WAN Ethernet Status from any Status screen to generate the WAN Ethernet Status screen. This table displays various parameters relating to the WAN Ethernet connection of the Gateway, including subnet mask, default gateway, and sent pack-ets. There are no user-configurable options in this screen.
Routing TableClick Routing Table from any Status screen to generate the Routing Table screen. This screen displays the Gateway’s routing table. There are no user-configurable options in this screen.
50
VDSL2/GigE Wireless 11n Gateway
Firewall StatusClick Firewall StatusThis table displays the status of the Gateway’s firewall. There are no user-configu-
NAT TableClick NAT Table from any Status screen to generate the NAT Table screen. This screen displays the Gateway’s NAT table. There are no user-configurable options in this screen.
51
Chapter 6 Status
Wireless StatusClick Wireless Status from any Status screen to generate the Wireless Status screen. This table displays the Gateway’s wireless network statistics, including wireless secu-rity type, wireless mode, and packets received. If the Gateway is set to use multiple SSIDs, select the SSID from the drop-down list at the top of the screen. The selected SSID’s status will be displayed on the lower part of the screen.
52
VDSL2/GigE Wireless 11n Gateway
Modem UtilizationClick Modem Utilizationsscreen. This table displays the Gateway’s modem statistics, including wireless memory used, LAN TCP settings, and, at the bottom of the screen, a LAN device session log. There are no user-configurable options in this screen.
53
Chapter 6 Status
LAN StatusClick LAN Status from any Status screen to generate the LAN Status screen. This
-nections, HPNA link status, and various networked device details. There are no user-configurable options in this screen.
54
Specifications
GeneralModel Number
V1000H
Standards
G.dmt G.lite t1.413
Protocol
LAN - CSMA/CD WAN - PPP, DHCP, Static IP
WAN
VDSL2 interface
LAN
10/100/1000 RJ-45 switched ports
Speed
LAN Ethernet: 10/100 Mbps auto-sensing Wireless
Cabling Type
Ethernet 10BaseT Ethernet100BaseTX
A
55
Appendix A Specifications
Wireless Operating RangeIndoors
Outdoors
Topology
LED Indicators
EnvironmentalPower
Certifications
Operating Temperature
Storage Temperature
Operating Humidity
10% to 85% non-condensing
Storage Humidity
5% to 90% non-condensing
56
Notices
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by implementing one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
Modifications
ctiontec Electronics, Inc., may void the user’s authority to operate the equipment.
57
Notices
only.
-lowing two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including interference that may cause unwanted operation.
Note -ments, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Actiontec Electronics, Inc. 760 North Mary Ave. Sunnyvale, CA 94086
GPL (General Public License)This product includes software code developed by third parties, including software
--
rights of the authors, and to the terms of the applicable licenses included in the
terms of the GPL and the LGPL, which are available on the enclosed product disk and can be accessed by inserting the disk into your CD-ROM drive and opening
58
Limited Warranty
Hardware: Actiontecthis hardware product will be free from defects in workmanship and materials,
from Actiontec Electronics or its authorized reseller.
ActiontecActiontecCustomer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is reasonably available, Actiontec Electronics may, in its sole discretion, refund to Customer the purchase price paid for the defec-tive product. All products that are replaced will become the property of Actiontec Electronics, Inc. Replacement products may be new or reconditioned. Actiontec
from shipment, or the remainder of the initial warranty period, whichever is longer.
Software: Actiontec Electronics warrants to Customer that each software pro-gram licensed from it will perform in substantial conformance to its program spec-
Actiontec Electronics or its authorized reseller. Actiontec Electronics warrants the media con-taining software against failure during the warranty period. The only updates that will be provided are at the sole discretion of Actiontec Electronics and will only be available for download at the Actiontec Web site, www.actiontec.com. Actiontec
Actiontec
for any defective software product, or to replace any defective media with software which substantially conforms to applicable Actiontec Electronics published specifi-cations. Customer assumes responsibility for the selection of the appropriate appli-cations program and associated reference materials. Actiontec Electronics makes no warranty or representation that its software products will meet Customer’s requirements or work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products
Actiontec Electronics software product documentation or specifications as being compatible, Actiontec
59
Limited Warranty
the non-compatibility is caused by a “bug” or defect in the third party’s product or from use of the software product not in accordance with Actiontec Electronics published specifications or user guide.
THIS ACTIONTEC
THIS ACTIONTEC
Obtaining Warranty Service: Customer may contact Actiontec Electronics Technical Support Center within the applicable warranty period to obtain war-ranty service authorization. Dated proof of purchase from Actiontec Electronics or its authorized reseller may be required. Products returned to Actiontec Electronics must be pre-authorized by Actiontec Electronics with a Return Merchandise
prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package. The repaired or replaced item will be shipped to Customer, at Actiontec Electronics’
Actiontec Electronics receives the defective product.
Return the product to:
Actiontec Electronics, Inc.760 North Mary Avenue
Sunnyvale, CA 94085
60
VDSL2/GigE Wireless 11n Gateway
60
Actiontec Electronics shall not be responsible for any software, firmware, informa-tion, memory data, or Customer data contained in, stored on, or integrated with any products returned to Actiontec Electronics for repair, whether under warranty or not.
WARRANTIES EXCLUSIVE ACTIONTEC
ACTIONTEC ELECTRONICS’ OPTION. TO
ACTIONTEC
ACTIONTEC
LIMITATION OF LIABILITYACTIONTEC
ACTIONTEC
61
Limited Warranty
PAID, AT ACTIONTEC
Disclaimerlimitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability
their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law.
Dispute Resolution: The customer may contact the Director of Technical Support in the event the Customer is not satisfied with Actiontec Electronics’ response to the complaint. In the event that the Customer is still not satisfied with the response of the Director of Technical Support, the Customer is instructed to contact the Director of Marketing. In the event that the Customer is still not satis-fied with the response of the Director of Marketing, the Customer is instructed to
Governing Law: This Limited Warranty shall be governed by the laws of the State