1
The National Physical Laboratory of The National Physical Laboratory of IsraelIsrael
in 2005in 2005
2
ContentsContents
Visiting card (slide 3) Location (slide 4) History (slide 5) Logo (slide 6) Organizational chart and contact
persons (slide 7) Staff (slides 8-9) Calibration scope (slides 10-19) Price list (slide 20) Links (slide 21)
3
The National Physical Laboratory of The National Physical Laboratory of Israel (INPL)Israel (INPL)
The Hebrew University of Jerusalem, Danciger “A” Bldg, Givat Ram, Jerusalem 91904
tel.: +972-2-5661856; fax: +972-2-6520797
5
History of INPL and the Metre History of INPL and the Metre ConventionConvention
- established in 1950 as a national metrology institute (NMI) by analogy with National Physical Laboratory in UK;
- representing Israel since 1985 at BIPM and other forums of the Member States of the Metre Convention (MC);
- signed in 2003 the Mutual Recognition Arrangement of National Measurement Standards and of Calibration and Measurement Certificates Issued by NMIs (drawn up by the CIPM under the authority given to it in the MC);
- accepted in 2004 by EUROMET as a corresponding NMI.
6
Logo Logo
The following ideas are used in the logo:
1) the known metrological “pyramid” with increased uncertainty to the bottom (from a measurement standard to the field measurements); the pyramid illustrating traceability chains, built in opposite to uncertainty direction (from a field measurement to the standards); such two triangles form the David’s Shield – the historical symbol of Jewish people;
2) white and blue colors are the colors of the Israeli flag.
7
Organizational chart of INPLOrganizational chart of INPL(a department of the Ministry of Trade, Industry and (a department of the Ministry of Trade, Industry and
Labor) Labor) and contact personsand contact persons
Scientific Director Dr. Ilya Kuselman
Technical Director Mr. Grisha Deitch Quality Manager
Dr. David Kisets
Lab. of Physical
Standards (length, temperature, mass, electrical parameters, plane angles, pressure, optics)
Mr. Claude
Apfeldorfer
Lab. of Frequency and Time
(calibration of oscillators, atomic clocks and GPSs)
Dr. Nadya Goldovsky
Lab. of Materials (chromatography, spectrophotometry, atomic absorption, gravimetry, volumetry and electrochemistry)
Dr. Ilya
Kuselman
Lab. of Field Measurements
(calibration of analyzers “on-line”, sampling and environmental analysis)
Mr. Shamay
Shpitser
8
StaffStaff
Division Name Responsibility Telephone number as +972-2- …
E-mail as
…@moital.gov.il
Administrative Mr. Grisha Deitch Dr. Ilya Kuselman
Ms. Dina Zaken Mr. Yaniv Shalom
Technical Director Scientific Director and Head of Materials Lab Assistant Book-keeper
6662296 5661856
5635698 5635698
grisha ilya.kuselman
dina yaniv.s
Lab of Physical Standards
Mr. Claude Apfeldorfer Dr. David Kisets
Dr. Emil Kiselgof
Ms. Galina Tsirulnikov
Dr. Israel Paperno Ms. Ester Kobliakov
Mr. Moshe Mosel
Head of the Lab INPL Quality Manager; temperature
Mass, length, plan angles, and electricity
Orders; interferometry Pressure and vacuum
Humidity
Optics
5664976
5664976
5664976
5664976
5664976
5664976 5664976
claude.ap david.ki
emil.ki
galina.ch
claude.ap
esther.ko
claude.ap
9
Staff - continuationStaff - continuation
Division Name Responsibility Telephone number as +972-2- …
E-mail as
…@moital.gov.il
Lab of Frequency
and Time
Dr. Nadya Goldovsky
Mr. Michael Luria
Frequency & time, electrical parameters
6536534
6536534
nadya.go michael.lu
Lab of Materials Dr. Elena Kardash Mr. Boris Anisimov
Dr. Marina Pavlichenko
Ms. Irina Goldfeld
Electrochemistry
Chromatography; atomic absorption; INPL PC system administrator
PT providing for local analytical labs
Orders; gravimetry, volumetry, potentiometry, spectrophotometry, atomic absorption
6536534
5618531
6536534
6536534
lena.ka
boris.a
maria.fa
irena.go
Lab of Field Measurements
Mr. Shamay Shpitser
Ms.Rina Monson’ego
Sampling and environmental analysis, calibration “on-line”
6513221
6513221
shamay.sh
rina.mo
Workshop Mr. David Simantov Technical support 5635698 dina
10
Measured Quantity, Instrument
Range
Best Measurement
Capability
Reference
Document
Measurement Standards
Gauge Blocks
0.5 – 100 mm
from 0.024 to 0.038 µm
Instruction Manual of TESA Interferometer
Automatic Gauge Block Interferometer
Gauge Blocks
0.5 – 100 mm
from 0.05 to 0.10 µm
Instruction Manual of TESA Comparator
Standard Gauge Blocks; TESA UPC Comparator
Gauge Blocks and Length Bars
25 - 600 mm from 0.04 to 0.3 µm
Instruction Manual of Federal Comparator
Standard Gauge Blocks and / or Length Bars; Federal Comparator
Gauge Blocks and Length Bars
600 – 1200 mm
from 0.6 to 1.2 µm
BCS The Calibration of
Length Bars
Standard Gauge Blocks and / or Length Bars; Matrix Level Comparator
INPL calibrationINPL calibration scope. Lengthscope. Length
11
Measured Quantity,
Instrument
Range
Best
Measurement Capability
Reference Document
Measurement Standard
Weights 1mg - 20kg
from 0.8 µg for 1mg up to 3mg for 20kg
DIN-1305; OIML R-
111
Standard Weights; Mass Comparator Balances
INPL calibrationINPL calibration scope. Massscope. Mass
12
INPL calibrationINPL calibration scope. scope. Frequency and timeFrequency and time
Measured Quantity,
Instrument
Range
Best
Measurement Capability
Reference Document
Measurement Standard
Oscillators, Clocks and GPS receivers
1Hz - 10MHz
10-14 for frequency
5 ns for
time sale
In-house method
UTC (INPL); Cs Atomic clocks and time interval counter; GPS Time Transfer System TTR-5
13
INPL calibrationINPL calibration scope. Electrical scope. Electrical parametersparameters
Measured Quantity, Instrument
Range
Best Measurement
Capability
Reference Document
Measurement Standard
Electric Potential DC Voltage reference standards
1V ; 1.018V 10V
0.015 ppm 0.15 ppm
DFM procedure
Josephson System, DC reference voltage standards; Multimeter HP 3458A
Electrical resistance
DC standard resistors
0.1 1 10
100 1000
10.000 100.000
1 M
0.5 ppm 0.15 ppm 0.2 ppm 0.3 ppm 0.4 ppm 0.5 ppm 2 ppm 3 ppm
Technical manual for model 9975 Guideline
Standard resistors. Guildline current comparator resistance bridge model 9975; Guideline transfer standard resistor model 9350 / 10ohms
14
INPL calibrationINPL calibration scope. scope. TemperatureTemperature
Measurement Standard
Reference Document
Best Measurement
Capability
Range
Measured Quantity, Instrument
Triple point cells, Tinsley Automatic AMBASSADOR bridge
NIST Technical Note 1265
1.1•10-3 °C 0.01°C Triple point of water
SPRTs with Tinsley Automatic AMBASSADOR bridge
NIST Technical Note 1265
1.8•10-3 °C 1.6•10-3 °C 1.6•10-3 °C 1.8•10-3 °C 2.0•10-3 °C
- 30°C 0°C
50°C 100°C
150-250°C
SPRT
SPRTs with Tinsley Automatic AMBASSADOR bridge
NIST Technical Note 1265
3.0•10-3 °C
11•10-3 °C
21•10-3 °C
51•10-3 °C
0-50°C (0.01°C/div) - 30-100°C (0.1°C/div) 100-200°C (0.2°C/div) 200-250°C (0.5°C/div)
Precision mercury-in-glass thermometers
15
INPL calibrationINPL calibration scope. Temperature - scope. Temperature - cont.cont.
Measured Quantity,
Instrument
Range
Best Measurement
Capability
Reference
Document
Measurement Standard
Type S and type R thermocouples
0-600°C 600 -
1100°C
0.40°C 0.50°C
NIST Technical note 1265; NIST
Monograph 175
Reference thermocouples type S; Multimeter Datron 1281
Thermometers -30 - 250°C 0.02 - 0.1°C
1) OIML guide to practical temperature measurements 2) NPL Techniques of temperature measurement
Standard mercury in glass thermometer
Optical pyrometers (Visual disappearing filament pyrometers)
800-1600°C
2.6 – 4.9 °C 1) OIML R-18; OIML guide to practical temperature measurements; 2) NPL Techniques of temperature measurement
Standard Ribbon-Filament Lamp
16
INPL calibrationINPL calibration scope. Plane anglescope. Plane angle
Measured Quantity,
Instrument
Range
Best Measurement
Capability
Reference Document
Measurement
Standard
Angle Gauges up to 360° 2' - 13'
0.2" 0.5"
NBSIR 80-1967
Standard indexing table
Precision polygons up to 360° 0.5" “Precision polygons” HILGER & WATTS, BZ125
Standard indexing table
Indexing tables up to 360° 0.1" NBSIR 80-1967
Standard indexing table
Autocollimators up to 15' 0.1" K.J. Hume “Metrology with autocollimators” HILGER & WATTS, London 1965
Standard indexing table
17
INPL calibrationINPL calibration scope. Pressurescope. Pressure
Measured Quantity,
Instrument
Range Best Measurement
Capability
Reference Document
Measurement Standard
Pressure gauges
8.3-170 kPa (gas)
26-39 ppm EAL Technical guide line;
OIML R-101
Measurement by Dead Weight Testers
Pressure gauges
40- 6900 kPa (gas)
30- 44 ppm EAL Technical guide line;
OIML R-101
Measurement by Dead Weight Testers
Pressure gauges 1.0-7.6 MPa
(oil)
34 ppm EAL Technical guide line;
OIML R-101
Measurement by Dead Weight Testers
Pressure gauges
7.5-120 MPa (oil)
31-38 ppm EAL Technical guide line;
OIML R-101
Measurement by Dead Weight Testers
18
INPL calibrationINPL calibration scope. Standards scope. Standards under development: physical fieldsunder development: physical fields
Measured Quantity,
Instrument
Range Best Measurement
Capability
Reference Document
Measurement Standard
Capacitors 1 pF -10 µF 10 -100 ppm
R.D.T. Electronics Engineering instruction
Standard capacitance measuring assembly: Gen Radio 1404A,B&C and 1620 Capacitance bridge
Standard Platinum Resistance Termometers (SPRT)
234.3116 K 302.9146 K 505.078 K 692.677 K
933.473 K
1.1 mK 1.0 mK 1.1 mK 1.1 mK
4.1 mK
BIPM calibration certificates
Fixed points: a) triple point of mercury, b) melting point of gallium, c) freezing point of tin, d) freezing point of zinc, e) freezing point of aluminuim
Illuminance meters
10-3 - 5·105 lx 2% Calibration certificates for
standard lamps; LMI manual B 500
Standard luxmeter and standard lamps
19
INPL calibrationINPL calibration scope. Standards scope. Standards under development: amount of under development: amount of
substancesubstance
Measured Quantity,
Instrument
Range Best Measurement
Capability
Reference Document
Measurement Standard
pH-meters, glass electrodes, solutions
3.5 – 10.0 pH 0.006 pH IUPAC recommendation
– 2002; NIST special publication
260-53
pH standard including Pt/Pt, hydrogen electrode
Conductometers, conductivity cells and solutions
5·10-4 - 5·10-3 S/m 5·10-3 – 10 S/m
1% 0.1%
NIST special publication
260-142
Electrolytic conductivity standard
Analytical instruments, substances and materials
0.01 ppb – 100% Specific for every analyte and sample matrix, for
every method
Variety of specific
documents
GC, GC-MS, HPLC, AAS with flow injection system, UV-Vis spectrophotom. etc.
20
Price listPrice list
Calibration price list and other information in Hebrew are available in the webpage of the Ministry of Trade, Industry and Labor:
http://www.moital.gov.il/NR/exeres/2F38C195-3662-4274-9A85-C61671D8C5E4.htm
For more information please contact Dr. Ilya Kuselman by e-mail: [email protected]
21
Links to national and international Links to national and international organizations collaborating with INPLorganizations collaborating with INPL
International Bureau of Weights and Measures (BIPM) -
European Collaboration in Measurement Standards (EUROMET) -
National Conference of Standards Laboratories – International (NCSLI) –
Co-operation on International Traceability in Analytical Chemistry (CITAC) -
Israeli Metrological Society (IMS) -
Israel Society for Quality (ISQ) -
Israel Analytical Chemistry Society (IACS) -
www.bipm.fr
www.euromet.org
www.ncsli.org
www.citac.cc
www.science.co.il/ims
www.forumsci.co.il/analchem
www.isq.org.il