TISI Library Accession List (Jan-Mar 2007) Page 1
TISI Library Accession List(January-March 2007)
ABRASION STANSA
SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
ACCIDENT PREVENTION STANSA
SANS 60479-4 2005 Effects of current on human beings and livestock - P.4: Effects of lightningstrokes on human beings and livestock /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
ACOUSTICS ISO
ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
AGRICULTURAL PRODUCTS ISO
ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.
STANSA SANS 10385-1 2005 Requirements for the implementation of an identity preservation system (IP
system) - P.1: IP system for the production, storage, handling and transportation of non-genetically modifiedunprocessed agricultural products /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
AIR FREIGHTERS ISO ISO 6966-1 2005 Aircraft ground equipment - Basic requirements - P.1: General design
requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 6968 2005 Aircraft ground equipment - Lower deck loader - Functional requirements /By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 2
AIR TREATMENT DEVICES STANSA
SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
AIR VALVES AWWA
ANSI/AWWA C512 2004 Air-release, air/vacuum, and combination air valves for waterworks service/By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2004.
AIR VALVES - WATERWORKS AWWA
ANSI/AWWA C512 2004 Air-release, air/vacuum, and combination air valves for waterworks service/By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2004.
AIRCRAFT COMPONENTS ISO
ISO 6966-1 2005 Aircraft ground equipment - Basic requirements - P.1: General designrequirements /By International Organization for Standardization (ISO). Geneva: ISO, 2005.
ISO 6968 2005 Aircraft ground equipment - Lower deck loader - Functional requirements /ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
ALARM SYSTEMS ISO ISO 7240-1 2005 Fire detection and alarm systems - P.1: General and definitions /By International
Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 7240-11 2005 Fire detection and alarm systems - P.11: Manual call points /By International
Organization for Standardization (ISO). Geneva: ISO, 2005.
STANSA
SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 3
ALUMINIUM ALLOYS JSA JIS H1352 1997 Methods for determination of silicon in aluminium and aluminium alloys /By
Japanese Standards Association (JSA). Tokyo: JSA, 1997. JIS H1360 1997 Methods for determination of nickel in aluminium and aluminium alloys /By
Japanese Standards Association (JSA). Tokyo: JSA, 1997. JIS H1361 1997 Methods for determination of tin in aluminium and aluminium alloys /By Japanese
Standards Association (JSA). Tokyo: JSA, 1997.
ARC LAMPS ISO
ISO 4892-2 2006 Plastics - Methods of exposure to laboratory light sources - P.2: Xenon-arc lamps/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
ARMOURED CABLES BSI
BS 7889 1997 600/1000 V single-core unarmoured electric cables having thermosetting insulation/By British Standards Institution (BSI). London: BSI, 1997.
ASBESTOS CEMENT AWWA
ANSI/AWWA C603 2005 Installation of asbestos - Cement pressure pipe /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
AUDIO EQUIPMENT IEC
IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /ByInternational Electrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.
AUDIOMETERS ISO
ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 4
AUDIOMETRY ISO
ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
AUDITORY THRESHOLD ISO
ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
AUTOTRANSFORMERS STANSA
SANS 60076-11 2005 Power transformers - P.11: Dry-type transformers /By Standards South Africa(STANSA). Pretoria: STANSA, 2005.
BALL VALVES AWWA
ANSI/AWWA C507 2005 Ball valves, 6 In. through 48 In. (150 mm through 1,200 mm) /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
BARRELS (CONTAINERS) AWWA
ANSI/AWWA C502 2005 Dry-barrel fire hydrants /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.
ANSI/AWWA C503 2005 Wet-barrel fire hydrants /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.
BARS (MATERIALS) DSM
MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2000.
TISI Library Accession List (Jan-Mar 2007) Page 5
BEAMS DSM
MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.
BILLETS DSM
MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2000.
BIOLOGICAL ANALYSIS AND TESTING DSM
MS 1044 P.3 1998 Mosquito vaporizing mats : P.3: Method for the evaluation of biological efficacy -Glass cylinder method /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.
BLOOMS DSM
MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.
BRAKES STANSA
SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:STANSA, 2005.
SANS 10310 2005 The manufacture and reconditioning of replacement brake lining assemblies /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
BRAKING SYSTEM COMPONENTS STANSA
SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:STANSA, 2005.
SANS 10310 2005 The manufacture and reconditioning of replacement brake lining assemblies /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 6
BRICKS ISO
ISO 5019-6 2005 Refractory bricks - Dimensions - P.6: Basic bricks for oxygen steel-makingconverters /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
BUILDINGS BSI
BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes andmachinery /By British Standards Institution (BSI). London: BSI, 2006.
DSM
MS 1064 P.1 2001 Guide to modular coordination in buildings - P.1: General principles /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
BUTTERFLY VALVES AWWA
ANSI/AWWA C504 2006 Rubber-seated butterfly valves /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.
CALIBRATION ISO
ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
CARDS STANSA SANS 7816-1 1998 Identification cards - Integrated circuit (s) cards with contacts - P.1: Physical
characteristics /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 7816-2 1999 Identification cards - Integrated circuit cards - P.2: Cards with contacts -
Dimensions and location of the contacts /By Standards South Africa (STANSA). Pretoria: STANSA, 1999.
SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards withcontacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.
TISI Library Accession List (Jan-Mar 2007) Page 7
SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
SANS 7816-15 2005 Identification cards - Integrated circuit cards - P.15: Cryptographic informationapplication /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
CASTINGS ISO
ISO 4991 2005 Steel castings for pressure purposes /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.
CEMENT MORTAR AWWA
ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) andlarger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.
CEMENTS
AWWA
ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) andlarger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.
BSI
BS EN 196-1 2005 Methods of testing cement - P.1: Determination of strength /By British StandardsInstitution (BSI). London: BSI, 2005.
BS EN 196-3 2005 Methods of testing cement - P.3: Determination of setting times and soundness/By British Standards Institution (BSI). London: BSI, 2005.
CHECK VALVES
AWWA
ANSI/AWWA C510 1997 Double check valve backflow prevention assembly /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1997.
TISI Library Accession List (Jan-Mar 2007) Page 8
CHEESE ISO
ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO,2006.
CHEMICAL ANALYSIS AND TESTING ISO
ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO,2006.
CHEMICAL REAGENTS BIS
IS 505 1995 Light kaolin /By Bureau of Indian Standards (BIS). 3rd ed. New Delhi: BIS, 1995.
CHLORIDES ISO
ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.
CLAY BIS
IS 2840 2002 China clay for ceramic industry /By Bureau of Indian Standards (BIS). 2nd ed. NewDelhi: BIS, 2002.
CLEANING MATERIALS DSM MS 1285 2001 Glass cleaner /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
CLOTH STANSA
SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).3rd ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 9
CLOTHING STANSA
SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:STANSA, 2005.
COATED FABRICS STANSA
SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).3rd ed. Pretoria: STANSA, 2005.
COATING PROCESSES STANSA
SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
COATINGS STANSA SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa
(STANSA). 3rd ed. Pretoria: STANSA, 2005. SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protective
paint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protective
paint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.
SANS 12944-4 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.4: Types of surface and surface preparation /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-7 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.7: Execution and supervision of paint work /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-8 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.8: Development of specifications for new work and maintenance /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 1998.
TISI Library Accession List (Jan-Mar 2007) Page 10
COBALT ALLOYS ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-
nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
CODED REPRESENTATION STANSA SANS 3166-3 2005 Codes for the representation of names of countries and their subdivisions - P.3:
Code for formerly used names of countries /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
CODES STANSA SANS 3166-3 2005 Codes for the representation of names of countries and their subdivisions - P.3:
Code for formerly used names of countries /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
COFFEE ISO ISO 3509 2005 Coffee and coffee products - Vocabulary /By International Organization for
Standardization (ISO). 4th ed. Geneva: ISO, 2005.
COLOUR-FASTNESS TESTS ISO ISO 105-C10 2006 Textiles - Tests for colour fastness - P.C10: Colour fastness to washing with
soap or soap and soda /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 105-E05 2006 Textiles - Tests for colour fastness - P.E05: Colour fastness to spotting: Acid /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 105-E06 2006 Textiles - Test for colour fasness - P.E06: Colour fastness to spotting: Alkali /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.
COMPRESSED GASES DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and
location of equipment /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
ISO ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:
Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 11
COMPRESSED GASES - AUTOMATIVE FUELS ISO
ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
COMPRESSED GASES - QUALITY ISO
ISO 15403-1 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.1:Designation of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
CONCENTRATION (CHEMICAL) STANSA
SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
CONCRETES ISO ISO 1920-2 2005 Testing of concrete - P.2: Properties of fresh concrete /By International
Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 1920-3 2004 Testing of concrete - P.3: Making and curing test specimens /By International
Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-5 2004 Testing of concrete - P.5: Properties of hardened concrete other than strength /By
International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-6 2004 Testing of concrete - P.6: Sampling, preparing and testing of concrete cores /By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
CONSTRUCTION EQUIPMENT BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and
machinery /By British Standards Institution (BSI). London: BSI, 2006.
COOKING APPLIANCES IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular
requirements for grills, toasters and similar portable cooking appliances /By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 12
CORROSION PROTECTION STANSA SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protective
paint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protective
paint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.
SANS 12944-4 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.4: Types of surface and surface preparation /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-7 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.7: Execution and supervision of paint work /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-8 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.8: Development of specifications for new work and maintenance /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 1998.
CRANES BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and
machinery /By British Standards Institution (BSI). London: BSI, 2006.
CURING (CONCRETE) ISO ISO 1920-3 2004 Testing of concrete - P.3: Making and curing test specimens /By International
Organization for Standardization (ISO). Geneva: ISO, 2004.
DANGEROUS MATERIALS DSM MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub Part 1:
Requirements for the construction and testing of packagings for dangerous goods /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.
TISI Library Accession List (Jan-Mar 2007) Page 13
DATA PROCESSING ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI
Management - Management functions - P.1: AOM211 - General management capabilities /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 1995.
DATA TRANSMISSION ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI
Management - Management functions - P.1: AOM211 - General management capabilities /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 1995.
DENSITY MEASUREMENT STANSA
SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
DIAGRAMS IEC IEC 60617 2006 Graphical symbols for diagrams - Comprising parts 2 to 13 of IEC 60617 /By
International Electrotechnical Commission (IEC). Geneva: IEC, 2006.
DIMENSIONAL COORDINATION DSM MS 1064 P.1 2001 Guide to modular coordination in buildings - P.1: General principles /By
Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
DIMENSIONAL MEASUREMENT STANSA SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:
STANSA, 2005.
DISINFECTANTS AWWA
ANSI/AWWA C651 2005 Disinfecting water mains /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 14
DRIED FOODS DSM MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea and
molluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.
DRUM BRAKES STANSA SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:
STANSA, 2005.
DRY-TYPE TRANSFORMERS
STANSA
SANS 60076-11 2005 Power transformers - P.11: Dry-type transformers /By Standards South Africa(STANSA). Pretoria: STANSA, 2005.
ELECTRIC CABLES
BSI
BS 7889 1997 600/1000 V single-core unarmoured electric cables having thermosetting insulation /ByBritish Standards Institution (BSI). London: BSI, 1997.
ELECTRIC CONDUCTORS
IEC
IEC PAS 61076-3-115 2005 Connectors for electronic equipment - P.3-115: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
ELECTRIC CONNECTORS
IEC
IEC PAS 61076-3-114 2005 Connectors for electronic equipment - P.3-114: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 15
IEC PAS 61076-3-116 2005 Connectors for electronic equipment - P.3-116: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 -Bayonet coupling with spring clamp /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towedvehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
ELECTRIC CONTROL EQUIPMENT STANSA SANS 60730-2-9 2005 Automatic electrical controls for household and similar use - P.2-9: Particular
requirements for temperature sensing controls /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 61800-5-1 2005 Adjustable speed electrical power drive systems - P.5-1: Safety requirements
- Electrical, thermal and energy /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
ELECTRIC CONVERTORS STANSA SANS 61800-4 2005 Adjustable speed electrical power drive systems - P.4: General requirements -
Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
ELECTRIC LAMPS STANSA SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-
driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
ELECTRIC PLUGS STANSA SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
ELECTRIC SOCKETS STANSA SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 16
ELECTRICAL APPLIANCES IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular
requirements for grills, toasters and similar portable cooking appliances /By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2006.
IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.
IEC 61770 2006 Electric appliances connected to the water mains - Avoidance of backsiphonageand failure of hose-sets /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.
ELECTRICAL ENGINEERING STANSA
SANS 60479-4 2005 Effects of current on human beings and livestock - P.4: Effects of lightningstrokes on human beings and livestock /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
ELECTRICAL HOUSEHOLD APPLIANCES STANSA
SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particularrequirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA,2005.
ELECTRICAL INSULATION IEC
IEC 60071-1 2006 Insulation co-ordination - P.1: Definitions, principles and rules /By InternationalElectrotechnical Commission (IEC). 8th ed. Geneva: IEC, 2006.
ELECTRICAL MEASURING INSTRUMENTS STANSA
SANS 62051-1 2005 Electricity metering - Data exchange for meter reading, tariff and load control -Glossary of terms - P.1: Terms related to data exchange with metering equipment using DLMS/COSEM /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 17
ELECTRICAL SAFETY
ISO
IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: ISO,2006.
STANSA
SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
ELECTRICAL TRANSMISSION SYSTEMS
STANSA
SANS 61800-4 2005 Adjustable speed electrical power drive systems - P.4: General requirements -Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
ELECTRICALLY-OPERATED DEVICES
IEC
IEC 60745-1 2006 Hand-held motor-operated electric tools - Safety - P.1: General requirements /ByInternational Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2006.
IEC 60745-2-1 2003 Hand-held motor-operated electric tools - Safety - P.2-1: Particularrequirements for drills and impact drills /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2003.
IEC 60745-2-2 2003 Hand-held motor-operated electric tools - Safety - P.2-2: Particularrequirements for screwdrivers and impact wrenches /By International Electrotechnical Commission (IEC). 2nd
ed. Geneva: IEC, 2003.
IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particularrequirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.
STANSA
SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 18
ELECTROMAGNETIC COMPATIBILITY (EMC) IEC IEC 61000-3-2 2005 Electromagnetic compatibility (EMC) - P.3-2: Limits - Limits for harmonic current
emissions (equipment input current ≤16 A per phase) /By International Electrotechnical Commission (IEC).3rd ed. Geneva: IEC, 2005.
IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - P.4-6: Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequency fields /By InternationalElectrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.
IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) - P.6-4: Generic standards - Emissionstandard for industrial environments /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.
ELECTRONIC CONNECTORS - FIBRE OPTICS IEC IEC PAS 61076-3-114 2005 Connectors for electronic equipment - P.3-114: Rectangular connectors
- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
ELECTRONIC EQUIPMENT AND COMPONENTS IEC QC 080000 2005 IEC Quality Assessment System for Electronic Components (IECQ) - Electrical and
Electronic components and Products Hazardous Substance Process Management System Requirements(HSPM) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.
EMERGENCY EQUIPMENT STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).
Pretoria: STANSA, 2005.
EMISSION IEC IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) - P.6-4: Generic standards - Emission
standard for industrial environments /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 19
ESSENTIAL OILS ISO
ISO 3761 2005 Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke or Aniba parviflora (Meisn.)Mez.] /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
EXPLOSIVE ATMOSPHERES IEC
IEC 60079-11 2006 Explosive atmospheres - P.11: Equipment protection by intrinsic safety "i" /ByInternational Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.
FABRIC TESTING STANSA SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).
3rd ed. Pretoria: STANSA, 2005. SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /By
Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
FIRE DETECTORS ISO ISO 7240-1 2005 Fire detection and alarm systems - P.1: General and definitions /By International
Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 7240-11 2005 Fire detection and alarm systems - P.11: Manual call points /By International
Organization for Standardization (ISO). Geneva: ISO, 2005.
FIRE EXTINGUISHERS STANSA SANS 11601 2005 Wheeled fire extinguishers - Performance and construction /By Standards South
Africa (STANSA). Pretoria: STANSA, 2005.
FIRE HYDRANTS AWWA ANSI/AWWA C502 2005 Dry-barrel fire hydrants /By American Water Works Association (AWWA)
and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA C503 2005 Wet-barrel fire hydrants /By American Water Works Association (AWWA)
and American National Standards Institute (ANSI). Denver: AWWA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 20
FIRE RESISTANCE DSM MS 544 P.9 S.1 2001 Code of practice for structural use of timber : P.9: Fire resistance of timber
structures : S.1: Method of calculating fire resistance of timber members /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.
FIRE SAFETY STANSA SANS 11601 2005 Wheeled fire extinguishers - Performance and construction /By Standards South
Africa (STANSA). Pretoria: STANSA, 2005.
FISH (MEAT)
DSM
MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd
ed. Selangor D.E.: DSM, 1998.
MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea andmolluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.
FLANGES AWWA
ANSI/AWWA C600 2005 Installation of ductile-iron water mains and their appurtenances /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2005.
FLEXIBLE PIPES ISO
ISO 6802 2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulicimpulse test with flexing /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
FLOW MEASUREMENT ISO
ISO 5168 2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 21
FOOD PRODUCTS DSM
MS 1529 2001 The production, processing, labelling and marketing of plant-based organicallyproduced foods /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
FREEZIG POINT STANSA
SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Referencemethod) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
FROZEN FOODS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia
(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd
ed. Selangor D.E.: DSM, 1998.
FRUIT JUICES DSM MS 714 2001 Packaged pineapple juice /By Department of Standards Malaysia (DSM). Selangor
D.E.: DSM, 2001.
FUSE-LINKS IEC IEC 60127-1 2006 Miniature fuses - P.1: Definitions for miniature fuses and general requirements for
miniature fuse-links /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.
FUSES IEC IEC 60127-1 2006 Miniature fuses - P.1: Definitions for miniature fuses and general requirements for
miniature fuse-links /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.
FUSION WELDING ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the
selection of the appropriate level of quality requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 22
ISO 3834-2 2005 Quality requirements for fusion welding of metallic materials - P.2: Comprehensivequality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-3 2005 Quality requirements for fusion welding of metallic materials - P.3: Standard qualityrequirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-4 2005 Quality requirements for fusion welding of metallic matrials - P.4: Elementaryquality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-5 2005 Quality requirements for fusion welding of metallic materials - P.5: Documents withwhich it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 orISO 3834-4 /By International Organization for Standardization (ISO). Geneva: ISO, 2005.
GATE VALVES AWWA
ANSI/AWWA C500 2002 Metal-seated gate valves for water supply service /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.
ANSI/AWWA C509 2001 Resilient-seated gate valves for water supply service /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2001.
ANSI/AWWA C513 2005 Open-channel, fabricated-metal slide gates and open-channel, fabricated-metal weir gates /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.
ANSI/AWWA C515 2001 Reduced-wall, resilient-seated gate valves for water supply service /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2001.
ANSI/AWWA C540 2002 Power-actuating devices for valves and slide gates /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.
ANSI/AWWA C561 2004 Fabricated stainless steel slide gates /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.
ANSI/AWWA C563 2004 Fabricated composite slide gates /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.
GEAR BOXES STANSA
SANS 10279 2005 The rebuilding of automotive gearboxes /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 23
GEAR DRIVES IEC
IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dryvault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
GLYCEROL DSM
MS 1507 2001 Refined palm glycerine /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.
GRAPHIC SYMBOLS IEC
IEC 60617 2006 Graphical symbols for diagrams - Comprising parts 2 to 13 of IEC 60617 /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2006.
GRINDING MACHINES (TOOLS) IEC
IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particularrequirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.
HAND-HELD TOOLS IEC IEC 60745-1 2006 Hand-held motor-operated electric tools - Safety - P.1: General requirements /By
International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2006. IEC 60745-2-1 2003 Hand-held motor-operated electric tools - Safety - P.2-1: Particular requirements for
drills and impact drills /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2003. IEC 60745-2-2 2003 Hand-held motor-operated electric tools - Safety - P.2-2: Particular
requirements for screwdrivers and impact wrenches /By International Electrotechnical Commission (IEC). 2nd
ed. Geneva: IEC, 2003. IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particular
requirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 24
HARDNESS TESTING ISO
ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.
ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration oftesting machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.
ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.
HEALTH AND SAFETY REQUIREMENTS STANSA
SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 2005.
HELMETS (PROTECTIVE) DSM
MS 183 2001 Industrial safety helmet /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.
HIGH-VOLTAGE TESTS IEC
IEC 60060-3 2006 High-voltage test techniques - P.3: Definitions and requirements for on-site testing/By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.
HOSIERY STANSA
SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:STANSA, 2005.
HOT-DIP COATIG ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 25
ISO 4999 2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet ofcommercial, drawing and structural qualities /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.
HOUSEHOLD ELECTRICAL APPLIANCES IEC IEC 60335-2-4 2006 Household and similar electrical appliances - Safety - P.2-4: Particular
requirements for spin extractors /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.
IEC 60335-2-59 2006 Household and similar electrical appliances - Safety - P.2-59: Particularrequirements for insect killers /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.
IEC 60335-2-7 2006 Household and similar electrical appliances - Safety - P.2-7: Particularrequirements for washing machines /By International Electrotechnical Commission (IEC). 6th ed. Geneva:IEC, 2006.
HUMIDIFIERS STANSA
SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
HYDRAULIC TRANSMISSION SYSTEMS ISO
ISO 3601-3 2005 Fluid power systems - O-rings - P.3: Quality acceptance criteria /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
IDENTITY CARDS ISO
ISO/IEC 7501-3 2005 Identification cards - Machine readable travel documents - P.3: Machinereadable official travel documents /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.
STANSA
SANS 7816-1 1998 Identification cards - Integrated circuit (s) cards with contacts - P.1: Physicalcharacteristics /By Standards South Africa (STANSA). Pretoria: STANSA, 1998.
TISI Library Accession List (Jan-Mar 2007) Page 26
SANS 7816-2 1999 Identification cards - Integrated circuit cards - P.2: Cards with contacts -Dimensions and location of the contacts /By Standards South Africa (STANSA). Pretoria: STANSA, 1999.
SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards withcontacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.
SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. - - Pretoria: STANSA, 2005.
SANS 7816-15 2005 Identification cards - Integrated circuit cards - P.15: Cryptographic informationapplication /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
IMPLANTS (SURGICAL) ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-
nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
INFORMATION EXCHANGE
ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI
Management - Management functions - P.1: AOM211 - General management capabilities /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 1995.
STANSA SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elements
for interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
INFORMATION TECHNOLOGY
STANSA SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards with
contacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.
SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
SANS 7816-15 2005 Identification cards - Integrated circuit cards - P.15: Cryptographic informationapplication /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 27
INSECTS IEC IEC 60335-2-59 2006 Household and similar electrical appliances - Safety - P.2-59: Particular
requirements for insect killers /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.
INSULATING OILS STANSA
NRS 079-1 2004 Mineral insulating oils (Uninhibited) - P.1: Purchase, management, maintenanceand testing /By The Technology Standardization Department (TSD). Pretoria: STANSA, 2004.
INTERNAL COMBUSTION ENGINES ISO
ISO 6621-5 2005 Internal combustion engines - Piston rings - P.5: Quality requirements /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
STANSA
SANS 10278 2005 The remanufacture of petrol engines /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.
IRON DSM
MS 1493 2000 Direct reduced iron (DRI) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2000.
JOINTS AWWA
ANSI/AWWA C606 2004 Grooved and shouldered joints /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.
KITCHEN UTENSILS ISO
IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: ISO,2006.
TISI Library Accession List (Jan-Mar 2007) Page 28
KNITTED FABRICS STANSA
SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
KNOOP HARDNESS MEASUREMENT ISO ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By International
Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration of
testing machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-3 2005 Metallic materials - Knoop hardness test - P.3: Calibration of reference blocks /By
International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /By
International Organization for Standardization (ISO). Geneva: ISO, 2005.
LABELLING DSM
MS 1529 2001 The production, processing, labelling and marketing of plant-based organicallyproduced foods /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
SAA
AS/NZS 6400 2005 Water efficient products - Rating and labelling /By Standards Australia (SAA).New South Wales: SAA, 2005.
LABORATORIES STANSA
SANS 10378 2004 General requirements for the competence of verification laboratories in terms ofthe Trade Metrology Act /By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
LABORATORY ACCREDITATION STANSA
SANS 10378 2004 General requirements for the competence of verification laboratories in terms ofthe Trade Metrology Act /By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (Jan-Mar 2007) Page 29
LABORATORY EQUIPMENT STANSA
SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing ofcapacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.
SANS 4788 1980 Laboratory glassware - Graduated measuring cylinders /By Standards South Africa(STANSA). Pretoria: STANSA, 1980.
LABORATORY GLASSWARE STANSA
SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing ofcapacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.
SANS 4788 1980 Laboratory glassware - Graduated measuring cylinders /By Standards South Africa(STANSA). Pretoria: STANSA, 1980.
LACES (FOOTWEAR) STANSA
SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
LACQUERS JSA
JIS K 5533 2003 Lacquer sealers /By Japanese Standards Association (JSA). Toyko: JSA, 2003.
LAMINATES DSM
MS 758 2001 Glued laminated timber - Performance requirements and minimum productionrequirements /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
LAMPS STANSA
SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 30
LASERS IEC
IEC 60825-5 2003 Safety of laser products - P.5: Manufacturer /By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2003.
LATICES DSM
MS 281 P.12 2001 Natural rubber latex concentrate: P.12: Determination of boric acid content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 281 P.14 2001 Natural rubber latex concentrate: P.14: Determination of nitrogen content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
ISO
ISO 3899 2005 Rubber - Nitrile latex - Determination of residual acrylonitrile content /By InternationalOrganization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
LEATHER ISO ISO 4684 2005 Leather - Chemical tests - Determination of volatile matter /By International
Organization for Standardization (ISO). Geneva: ISO, 2005.
LIFTING STANSA SANS 7531 1987 Wire rope slings for general purposes - Characteristics and specifications /By
Standards South Africa (STANSA). Pretoria: STANSA, 1987.
LIFTING EQUIPMENT BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and
machinery /By British Standards Institution (BSI). London: BSI, 2006.
LIGHTNING STANSA SANS 10313 2005 The protection of structures against lighting /By Standards South Africa
(STANSA). 2nd ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 31
LIGHTNING PROTECTION STANSA
SANS 10313 2005 The protection of structures against lighting /By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2005.
LINEAR MEASUREMENT STANSA
SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:STANSA, 2005.
LIQUEFIED PETROLEUM GAS DSM
MS 537 2001 Method of test for volatility of liquefied petroleum gases /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.
MS 875 2001 Method of test for sulphur in liquefied petroleum gases (oxy-hydrogen burner or lamp)/By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
LIQUID CHROMATOGRAPHY DSM
MS 817 P.6 2001 Methods of test for palm oil and palm oil products - P.6: Determination oftocopherols and tocotrienols content - Method using high-performance liquid chromatography /By Departmentof Standards Malaysia (DSM). 2nd ed. Selangor D.E.: DSM, 2001.
LOW-TEMPERATURE TESTING ISO
ISO 2921 2005 Rubber, vulcanized - Determination of low-temperature characteristics -Temperature-retraction procedure (TR test) /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.
LOW-VOLTAGE INSTALLATIONS IEC
IEC 60364-1 2005 Low-voltage electrical installations - P.1: Fundamental principles, assessment ofgeneral characteristics, definitions /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 32
MACHINE-READABLE MATERIALS ISO
ISO/IEC 7501-3 2005 Identification cards - Machine readable travel documents - P.3: Machinereadable official travel documents /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.
MACHINE TOOLS ISO
ISO 3089 2005 Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
MARKS BSI
BS 5499-11 2002 Graphical symbols and signs - Safety signs, including fire safety signs - P.11:Water safety signs /By British Standards Institution (BSI). London: BSI, 2002.
MEAT DSM MS 953 2001 Method of sampling for meat and meat products /By Department of Standards
Malaysia (DSM). Selangor D.E.: DSM, 2001.
MEAT PRODUCTS DSM MS 953 2001 Method of sampling for meat and meat products /By Department of Standards
Malaysia (DSM). Selangor D.E.: DSM, 2001.
MECHANICAL PROPERTIES OF MATERIALS ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-
nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
METAL COATINGS ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 33
METALS ISO
ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.
ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration oftesting machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.
ISO 4545-3 2005 Metallic materials - Knoop hardness test - P.3: Calibration of reference blocks /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.
ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.
MILK STANSA
SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Referencemethod) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
SANS 9622 2005 Whole milk - Determination of milkfat, protein and lactose content - Guidance onthe operation of mid-infrared instruments /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
MOSQUITO MATS DSM
MS 1044 P.3 1998 Mosquito vaporizing mats : P.3: Method for the evaluation of biological efficacy -Glass cylinder method /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.
NATURAL GAS DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and
location of equipment /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
ISO ISO 15403-1 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.1:
Designation of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 34
NATURAL RUBBER
DSM
MS 281 P.12 2001 Natural rubber latex concentrate: P.12: Determination of boric acid content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 281 P.14 2001 Natural rubber latex concentrate: P.14: Determination of nitrogen content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
NICKEL
JSA
JIS H1360 1997 Methods for determination of nickel in aluminium and aluminium alloys /ByJapanese Standards Association (JSA). Tokyo: JSA, 1997.
NICKEL CONTAINING ALLOYS
ISO
ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
NON-VOLATILE MATTER DETERMINATION
STANSA
SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
OCCUPATIONAL SAFETY
STANSA
SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 2005.
OPEN SYSTEMS INTERCONNECTION ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI
Management - Management functions - P.1: AOM211 - General management capabilities /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 1995.
TISI Library Accession List (Jan-Mar 2007) Page 35
OPTICAL FIBRES STANSA SANS 60793-2-50 2005 Optical fibres - P.2-50: Product specifications - Sectional specification for
class B single-mode fibres /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
OPTICAL SCANNERS IEC IEC 62129 2006 Calibration of optical spectrum analyzers /By International Electrotechnical
Commission (IEC). Geneva: IEC, 2006.
OUTLET CONNECTIONS IEC
IEC TR 60083 2006 Plugs and socket-outlets for domestic and similar general use standardized inmember countries of IEC /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.
PACKAGING DSM
MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub P.1: Requirementsfor the construction and testing of packagings for dangerous goods /By Department of Standards Malaysia(DSM). Selangor D.E.: DSM, 2001.
PACKAGING - TESTING DSM MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub Part 1:
Requirements for the construction and testing of packagings for dangerous goods /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.
PAINTS DSM
MS 133 P. B5 1997 Methods of test for paints and varnishes : P. B5: Determination of 'soluble' leadcontent by flame atomic absorption spectrometric method and dithizone spectrophotometric method /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 1997.
STANSA
SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 36
PALM KERNEL OIL DSM
MS 817 P.6 2001 Methods of test for palm oil and palm oil products - P.6: Determination oftocopherols and tocotrienols content - Method using high-performance liquid chromatography /By Departmentof Standards Malaysia (DSM). 2nd ed. Selangor D.E.: DSM, 2001.
MS 1507 2001 Refined palm glycerine /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.
PAPER PULP
ISO
ISO 5269-2 2004 Pulps - Preparation of laboratory sheets for physical testing - P.2: Rapid-Kothenmethod /By International Organization for Standardization (ISO). Geneva: ISO, 2004.
PETROL ENGINES
STANSA
SANS 10278 2005 The remanufacture of petrol engines /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.
PETROLEUM PRODUCTS
ISO
ISO 4259 2006 Petroleum products - Determination and application of precision data in relation tomethods of test /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.
PIGMENTS
STANSA
SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
PILLING TESTS
STANSA
SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TISI Library Accession List (Jan-Mar 2007) Page 37
PINEAPPLES DSM MS 714 2001 Packaged pineapple juice /By Department of Standards Malaysia (DSM). Selangor
D.E.: DSM, 2001.
PIPE FITTINGS
AWWA ANSI/AWWA C605 2005 Underground installation of polyvinyl chloride (PVC) pressure pipe and
fittings for water /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.
ISO
ISO 1167-1 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.1: General method /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1167-2 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.2: Preparation of pipe test pieces /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.
PIPELINES
AWWA ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) and
larger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.
ANSI/AWWA C606 2004 Grooved and shouldered joints /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.
PIPES ISO ISO 1167-1 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -
Determination of the resistance to internal pressure - P.1: General method /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1167-2 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.2: Preparation of pipe test pieces /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 38
PIPEWORK SYSTEMS
AWWA
ANSI/AWWA C600 2005 Installation of ductile-iron water mains and their appurtenances /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2005.
PIPING AWWA
ANSI/AWWA C600 2005 Installation of ductile-iron water mains and their appurtenances /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2005.
PISTON RINGS ISO
ISO 6621-5 2005 Internal combustion engines - Piston rings - P.5: Quality requirements /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
PLASTICS ISO ISO 483 2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to
maintain the humidity at a constant value /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.
ISO 4892-2 2006 Plastics - Methods of exposure to laboratory light sources - P.2: Xenon-arc lamps/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
PLASTICS AND RUBBER TECHNOLOGY ISO ISO 3899 2005 Rubber - Nitrile latex - Determination of residual acrylonitrile content /By International
Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
PLUG VALVES AWWA
ANSI/AWWA C517 2005 Resilient-seated cast-iron eccentric plug valves /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 39
PLYWOOD
DSM MS 544 P.4 S.1 2001 Code of practice for structural use of timber - P.4: Timber panel products :
S.1: Structural plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.4 S.2 2001 Code of practice for structural use of timber - P.4: Timber panel products :S.2: Marine plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
POROUS MATERIALS
DSM MS 1493 2000 Direct reduced iron (DRI) /By Department of Standards Malaysia (DSM). Selangor
D.E.: DSM, 2000.
POTENTIOMETRIC METHODS
ISO ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -
Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.
PRESERVATION
STANSA
SANS 10385-1 2005 Requirements for the implementation of an identity preservation system (IPsystem) - P.1: IP system for the production, storage, handling and transportation of non-genetically modifiedunprocessed agricultural products /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
PRESSURE EQUIPMENT
ISO ISO 4991 2005 Steel castings for pressure purposes /By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
PRESSURE PIPES AWWA ANSI/AWWA C603 2005 Installation of asbestos - Cement pressure pipe /By American Water Works
Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 40
ANSI/AWWA C605 2005 Underground installation of polyvinyl chloride (PVC) pressure pipe andfittings for water /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.
PRESSURE VESSELS SAA AS 1271 2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and
unfired pressure vessels /By Standards Australia (SAA). New South Wales: SAA, 2003.
PROCESSED FOODS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia
(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd ed.
Selangor D.E.: DSM, 1998.
PROTECTIVE COATINGS AWWA
ANSI/AWWA C550 2005 Protective interior coatings for valves and hydrants /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
STANSA
SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998.
SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.
SANS 12944-4 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.4: Types of surface and surface preparation /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-7 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.7: Execution and supervision of paint work /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.
SANS 12944-8 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.8: Development of specifications for new work and maintenance /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 1998.
TISI Library Accession List (Jan-Mar 2007) Page 41
QUALITY ASSURANCE IEC
QC 080000 2005 IEC Quality Assessment System for Electronic Components (IECQ) - Electrical andElectronic components and Products Hazardous Substance Process Management System Requirements(HSPM) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.
ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the
selection of the appropriate level of quality requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-2 2005 Quality requirements for fusion welding of metallic materials - P.2: Comprehensivequality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-3 2005 Quality requirements for fusion welding of metallic materials - P.3: Standard qualityrequirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-4 2005 Quality requirements for fusion welding of metallic matrials - P.4: Elementaryquality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-5 2005 Quality requirements for fusion welding of metallic materials - P.5: Documents withwhich it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 orISO 3834-4 /By International Organization for Standardization (ISO). Geneva: ISO, 2005.
QUANTITATIVE ANALYSIS ISO ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-2 2006 Textiles - Quantitative chemical analysis - P.2: Ternary fibre mixtures /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-3 2006 Textiles - Quantitative chemical analysis - P.3: Mixtures of acetate and certain
other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein and
certain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modaland cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 42
ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.
ISO 1833-8 2006 Textiles - Quantitative chemical analysis - P.8: Mixtures of acetate and triacetatefibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-9 2006 Textiles - Quantitative chemical analysis - P.9: Mixtures of acetate and triacetatefibres (method using benzyl alcohol) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-10 2006 Textiles - Quantitative chemical analysis - P.10: Mixtures of triacetate orpolylactide and certain other fibres (method using dichloromethane) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1833-11 2006 Textiles - Quantitative chemical analysis - P.11: Mixtures of cellulose andpolyester fibres (method using sulfuric acid) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-12 2006 Textiles - Quantitative chemical analysis - P.12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-13 2006 Textiles - Quantitative chemical analysis - P.13: Mixtures of certain chlorofibresand certain other fibres (method using carbon disulfide/acetone) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-15 2006 Textiles - Quantitative chemical analysis - P.15: Mixtures of jute and certainanimal fibres (method by determining nitrogen content) /By International Organization for Standardization(ISO). Geneva: ISO, 2006.
ISO 1833-16 2006 Textiles - Quantitative chemical analysis - P.16: Mixtures of polypropylene fibresand certain other fibres (method using xylene) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-17 2006 Textiles - Quantitative chemical analysis - P.17: Mixtures of chlorofibres(homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-18 2006 Textiles - Quantitative chemical analysis - P.18: Mixtures of silk and wool or hair(method using sulfuric acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 43
ISO 1833-19 2006 Textiles - Quantitative chemical analysis - P.19: Mixtures of cellulose fibres andasbestos (method by heating) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-21 2006 Textiles - Quantitative chemical analysis - P.21: Mixtures of chlorofibres, certainmodacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
RADIO DISTURBANCES IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.
RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.
RECEIVERS - MEASUREMENT IEC IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcast
transmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.
REFRACTORY MATERIALS ISO ISO 5019-6 2005 Refractory bricks - Dimensions - P.6: Basic bricks for oxygen steel-making
converters /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
REFUELLING STATIONS DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and
location of equipment /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
REINFORCING MATERIALS STANSA SANS 9933 1995 Products in fibre reinforced cement - Long corrugated or asymmetrical section
sheets and fittings for roofing and cladding /By Standards South Africa (STANSA). Pretoria: STANSA, 1995.
TISI Library Accession List (Jan-Mar 2007) Page 44
RELISHES (FOOD) DSM
MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.
ROAD VEHICLES STANSA
SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towedvehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
ROOM HUMIDIFIERS STANSA
SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.
RUBBER ISO ISO 15113 2005 Rubber - Determination of frictional properties /By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
SAFETY MEASURES IEC
IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /By InternationalElectrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.
STANSA SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards South
Africa (STANSA). Pretoria: STANSA, 2005. SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particular
requirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 61800-5-1 2005 Adjustable speed electrical power drive systems - P.5-1: Safety requirements
- Electrical, thermal and energy /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 45
SAMPLING METHODS DSM
MS 953 2001 Method of sampling for meat and meat products /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.
SANITARY APPLIANCES DSM
MS 1522 2001 Vitreous china water closet pans /By Department of Standards Malaysia (DSM).Selangor D.E.: DSM, 2001.
SAVOURY SAUCES DSM MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). Selangor
D.E.: DSM, 2001.
SCOURING POWDER DSM MS 253 2001 Scouring powder /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
SEALERS JSA JIS K 5533 2003 Lacquer sealers /By Japanese Standards Association (JSA). Toyko: JSA, 2003.
SECTIONS (STRUCTURES) DSM MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department of
Standards Malaysia (DSM). Selangor D.E.: DSM, 2000.
MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.
SHEET MATERIALS ISO
ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 46
SHELL FISH DSM MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea and
molluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.
SHIELDING (ELECTRICITY) IEC IEC PAS 61076-3-115 2005 Connectors for electronic equipment - P.3-115: Rectangular connectors
- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
SHOWER BATHS STANSA SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particular
requirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
SHRIMPS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia
(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd ed.
Selangor D.E.: DSM, 1998.
SIGNAL DEVICES BSI BS 5499-11 2002 Graphical symbols and signs - Safety signs, including fire safety signs - P.11:
Water safety signs /By British Standards Institution (BSI). London: BSI, 2002.
SILICON JSA JIS H1352 1997 Methods for determination of silicon in aluminium and aluminium alloys /By
Japanese Standards Association (JSA). Tokyo: JSA, 1997.
SOCKETS IEC IEC TR 60083 2006 Plugs and socket-outlets for domestic and similar general use standardized in
member countries of IEC /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 47
SOUND BROADCASTING IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.
SOUND GENERATORS STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).
Pretoria: STANSA, 2005.
STEELS DSM MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of Standards
Malaysia (DSM). Selangor D.E.: DSM, 2000.
STORAGE BATTERIES STANSA SANS 61960 2005 Secondary cells and batteries containing alkaline or other non-acid electrolytes -
Secondary lithium cells and batteries for portable applications /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.
STRUCTURAL DESIGN BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and
machinery /By British Standards Institution (BSI). London: BSI, 2006.
STRUCTURAL STEELS DSM MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department of
Standards Malaysia (DSM). Selangor D.E.: DSM, 2000. MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department of
Standards Malaysia (DSM). Selangor D.E.: DSM, 2000.
ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 48
STRUCTURAL TIMBER DSM MS 544 P.1 2001 Code of practice for structural use of timber : P.1: General /By Department of
Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.2 2001 Code of practice for structural use of timber : P.2: Permissible stress design of
solid timber /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.3 2001 Code of practice for structural use of timber : P.3: Permissible stress design of
glued laminated timber /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.1 2001 Code of practice for structural use of timber - P.4: Timber panel products :
S.1: Structural plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.2 2001 Code of practice for structural use of timber - P.4: Timber panel products :
S.2: Marine plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.3 2001 Code of practice for structural use of timber - P.4: Timber panel products :
S.3: Cement bonded particleboard (CBP) /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.
MS 544 P.4 S.4 2001 Code of practice for structural use of timber - P.4: Timber panel products :S.4: Oriented Strand Board (OSB) /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.5 2001 Code of practice for structural use of timber: P.5: Timber joints /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.6 2001 Code of practice for structural use of timber: P.6: Workmanship, inspection andmaintenance /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.7 2001 Code of practice for structural use of timber: P.7: Testing /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.9 S.1 2001 Code of practice for structural use of timber : P.9: Fire resistance of timberstructures : S.1: Method of calculating fire resistance of timber members /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.
MS 544 P.11 S.1 2001 Code of practice for structural use of timber - P.11: Recommended spantables and their calculations : S.1: Domestic floor joists /By Department of Standards Malaysia (DSM).Geneva: DSM, 2001.
MS 544 P.11 S.2 2001 Code of practice for structural use of timber: P.11: Recommended spantables and their calculations: S.2: Ceiling joists /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.
TISI Library Accession List (Jan-Mar 2007) Page 49
MS 544 P.11 S.3 2001 Code of practice for structural use of timber: P.11: Recommended spantables and their calculations: S.3: Ceiling binders /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.
STRUCTURES BSI
BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes andmachinery /By British Standards Institution (BSI). London: BSI, 2006.
SURFACE TREATMENT STANSA
SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.
SWITCHGEAR IEC IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dry
vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
SWITCHGEAR HIGH VOLTAGE IEC
IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dryvault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.
TELEVISION BROADCASTING IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.
IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcasttransmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.
TISI Library Accession List (Jan-Mar 2007) Page 50
TELEVISION RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.
IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcasttransmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.
TEMPERATURE CONTROL STANSA
SANS 60730-2-9 2005 Automatic electrical controls for household and similar use - P.2-9: Particularrequirements for temperature sensing controls /By Standards South Africa (STANSA). Pretoria: STANSA,2005.
TEST EQUIPMENT ISO ISO 483 2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to
maintain the humidity at a constant value /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.
TESTING BSI BS EN 196-1 2005 Methods of testing cement - P.1: Determination of strength /By British Standards
Institution (BSI). London: BSI, 2005. BS EN 196-3 2005 Methods of testing cement - P.3: Determination of setting times and soundness
/By British Standards Institution (BSI). London: BSI, 2005. ISO 1920-5 2004 Testing of concrete - P.5: Properties of hardened concrete other than strength /By
International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-6 2004 Testing of concrete - P.6: Sampling, preparing and testing of concrete cores /By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
TESTING CONDITIONS ISO ISO 3089 2005 Machine tools - Test conditions for self-centring, manually-operated chucks with one-
piece jaws /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 51
TEXTILE FIBRES
ISO ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-2 2006 Textiles - Quantitative chemical analysis - P.2: Ternary fibre mixtures /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-3 2006 Textiles - Quantitative chemical analysis - P.3: Mixtures of acetate and certain
other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein and
certain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modaland cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.
ISO 1833-8 2006 Textiles - Quantitative chemical analysis - P.8: Mixtures of acetate and triacetatefibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-9 2006 Textiles - Quantitative chemical analysis - P.9: Mixtures of acetate and triacetatefibres (method using benzyl alcohol) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-10 2006 Textiles - Quantitative chemical analysis - P.10: Mixtures of triacetate orpolylactide and certain other fibres (method using dichloromethane) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1833-11 2006 Textiles - Quantitative chemical analysis - P.11: Mixtures of cellulose andpolyester fibres (method using sulfuric acid) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-12 2006 Textiles - Quantitative chemical analysis - P.12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-13 2006 Textiles - Quantitative chemical analysis - P.13: Mixtures of certain chlorofibresand certain other fibres (method using carbon disulfide/acetone) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 52
ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.
ISO 1833-15 2006 Textiles - Quantitative chemical analysis - P.15: Mixtures of jute and certainanimal fibres (method by determining nitrogen content) /By International Organization for Standardization(ISO). Geneva: ISO, 2006.
ISO 1833-16 2006 Textiles - Quantitative chemical analysis - P.16: Mixtures of polypropylene fibresand certain other fibres (method using xylene) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-17 2006 Textiles - Quantitative chemical analysis - P.17: Mixtures of chlorofibres(homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-18 2006 Textiles - Quantitative chemical analysis - P.18: Mixtures of silk and wool or hair(method using sulfuric acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-19 2006 Textiles - Quantitative chemical analysis - P.19: Mixtures of cellulose fibres andasbestos (method by heating) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-21 2006 Textiles - Quantitative chemical analysis - P.21: Mixtures of chlorofibres, certainmodacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TEXTILE MACHINERY AND ACCESSORIES ISO
ISO 5234 2005 Textile machinery and accessories - Metallic card clothing - Definitions ofdimensions, types and mounting /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.
TEXTILE TESTING ISO
ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein andcertain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
STANSA SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /By
Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 53
SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).3rd ed. Pretoria: STANSA, 2005.
SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TEXTILES ISO ISO 105-C10 2006 Textiles - Tests for colour fastness - P.C10: Colour fastness to washing with
soap or soap and soda /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 105-E05 2006 Textiles - Tests for colour fastness - P.E05: Colour fastness to spotting: Acid /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 105-E06 2006 Textiles - Test for colour fasness - P.E06: Colour fastness to spotting: Alkali /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-2 2006 Textiles - Quantitative chemical analysis - P.2: Ternary fibre mixtures /By
International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-3 2006 Textiles - Quantitative chemical analysis - P.3: Mixtures of acetate and certain
other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modal
and cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-8 2006 Textiles - Quantitative chemical analysis - P.8: Mixtures of acetate and triacetatefibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-9 2006 Textiles - Quantitative chemical analysis - P.9: Mixtures of acetate and triacetatefibres (method using benzyl alcohol) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-10 2006 Textiles - Quantitative chemical analysis - P.10: Mixtures of triacetate orpolylactide and certain other fibres (method using dichloromethane) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 54
ISO 1833-11 2006 Textiles - Quantitative chemical analysis - P.11: Mixtures of cellulose andpolyester fibres (method using sulfuric acid) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-12 2006 Textiles - Quantitative chemical analysis - P.12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-13 2006 Textiles - Quantitative chemical analysis - P.13: Mixtures of certain chlorofibresand certain other fibres (method using carbon disulfide/acetone) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.
ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.
ISO 1833-15 2006 Textiles - Quantitative chemical analysis - P.15: Mixtures of jute and certainanimal fibres (method by determining nitrogen content) /By International Organization for Standardization(ISO). Geneva: ISO, 2006.
ISO 1833-16 2006 Textiles - Quantitative chemical analysis - P.16: Mixtures of polypropylene fibresand certain other fibres (method using xylene) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.
ISO 1833-17 2006 Textiles - Quantitative chemical analysis - P.17: Mixtures of chlorofibres(homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-18 2006 Textiles - Quantitative chemical analysis - P.18: Mixtures of silk and wool or hair(method using sulfuric acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-19 2006 Textiles - Quantitative chemical analysis - P.19: Mixtures of cellulose fibres andasbestos (method by heating) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO 1833-21 2006 Textiles - Quantitative chemical analysis - P.21: Mixtures of chlorofibres, certainmodacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.
STANSA
SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TISI Library Accession List (Jan-Mar 2007) Page 55
THERMAL CUTTING STANSA
SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 2005.
THERMISTORS IEC IEC 60738-1 2006 Thermistors - Directly heated positive temperature coefficient - P.1: Generic
specification /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.
STANSA SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference
method) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
TIN ALLOYS JSA JIS H1361 1997 Methods for determination of tin in aluminium and aluminium alloys /By Japanese
Standards Association (JSA). Tokyo: JSA, 1997.
TOASTERS IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular
requirements for grills, toasters and similar portable cooking appliances /By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2006.
TOMATOES DSM
MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.
TOROIDAL SEALING RINGS ISO
ISO 3601-3 2005 Fluid power systems - O-rings - P.3: Quality acceptance criteria /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
TISI Library Accession List (Jan-Mar 2007) Page 56
TOYS STANSA
SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA,2005.
TRANSFORMERS STANSA
SANS 60076-11 2005 Power transformers - P.11: Dry-type transformers /By Standards South Africa(STANSA). Pretoria: STANSA, 2005.
UNALLOYED STEELS ISO
ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
ISO 4999 2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet ofcommercial, drawing and structural qualities /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.
VACUUM DEVICES AWWA
ANSI/AWWA C512 2004 Air-release, air/vacuum, and combination air valves for waterworks service/By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2004.
VALVES AWWA
ANSI/AWWA C508 2001 Swing-check valves for waterworks service, 2-In. through 24-In. (50-mmthrough 600-mm) NPS /By American Water Works Association (AWWA) and American National StandardsInstitute (ANSI). Denver: AWWA, 2001.
ANSI/AWWA C517 2005 Resilient-seated cast-iron eccentric plug valves /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
ANSI/AWWA C540 2002 Power-actuating devices for valves and slide gates /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.
TISI Library Accession List (Jan-Mar 2007) Page 57
ANSI/AWWA C550 2005 Protective interior coatings for valves and hydrants /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.
SAA AS 1271 2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and
unfired pressure vessels /By Standards Australia (SAA). New South Wales: SAA, 2003.
VALVES FOR WATER SUPPLY IN BUILDINGS AWWA ANSI/AWWA C515 2001 Reduced-wall, resilient-seated gate valves for water supply service /By
American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2001.
VARNISHES DSM MS 133 P. B5 1997 Methods of test for paints and varnishes : P. B5: Determination of 'soluble' lead
content by flame atomic absorption spectrometric method and dithizone spectrophotometric method /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 1997.
VEHICLE LIGHTS STANSA SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-
driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
VEHICLES STANSA SANS 10279 2005 The rebuilding of automotive gearboxes /By Standards South Africa (STANSA).
Pretoria: STANSA, 2005.
VIDEO SIGNALS IEC IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /By
International Electrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.
VITRIFIED CHINA DSM MS 1522 2001 Vitreous china water closet pans /By Department of Standards Malaysia (DSM).
Selangor D.E.: DSM, 2001.
TISI Library Accession List (Jan-Mar 2007) Page 58
VOCABULARY ISO ISO 3509 2005 Coffee and coffee products - Vocabulary /By International Organization for
Standardization (ISO). 4th ed. Geneva: ISO, 2005. ISO 5234 2005 Textile machinery and accessories - Metallic card clothing - Definitions of dimensions,
types and mounting /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
STANSA SANS 62051-1 2005 Electricity metering - Data exchange for meter reading, tariff and load control -
Glossary of terms - P.1: Terms related to data exchange with metering equipment using DLMS/COSEM /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.
VOLUME MEASUREMENT STANSA SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of
capacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.
VULCANIZED RUBBER ISO ISO 2921 2005 Rubber, vulcanized - Determination of low-temperature characteristics -
Temperature-retraction procedure (TR test) /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.
WARNING DEVICES STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).
Pretoria: STANSA, 2005.
WASHING MACHINES IEC IEC 60335-2-7 2006 Household and similar electrical appliances - Safety - P.2-7: Particular requirements
for washing machines /By International Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2006.
WATER SAA AS/NZS 6400 2005 Water efficient products - Rating and labelling /By Standards Australia (SAA).
New South Wales: SAA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 59
WATER PURIFICATION STANSA SANS 10298 2005 Indirect small to medium-sized gas chlorination systems for the disinfection of
water /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
WATER TREATMENT STANSA SANS 10298 2005 Indirect small to medium-sized gas chlorination systems for the disinfection of
water /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.
WATERWORKS
AWWA ANSI/AWWA C500 2002 Metal-seated gate valves for water supply service /By American Water
Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.
ANSI/AWWA C511 1997 Reduced-pressure principle backflow prevention assembly /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1997.
ANSI/AWWA C651 2005 Disinfecting water mains /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.
WEAR RESISTANCE STANSA
SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.
WELDING ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the
selection of the appropriate level of quality requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-2 2005 Quality requirements for fusion welding of metallic materials - P.2: Comprehensivequality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
ISO 3834-3 2005 Quality requirements for fusion welding of metallic materials - P.3: Standard qualityrequirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 60
ISO 3834-4 2005 Quality requirements for fusion welding of metallic matrials - P.4: Elementaryquality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
STANSA SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards South
Africa (STANSA). Pretoria: STANSA, 2005.
WIRE ROPES STANSA SANS 7531 1987 Wire rope slings for general purposes - Characteristics and specifications /By
Standards South Africa (STANSA). Pretoria: STANSA, 1987.
WOOD DSM MS 758 2001 Glued laminated timber - Performance requirements and minimum production
requirements /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.
STANSA SANS 10005 2005 The preservative treatment of timber /By Standards South Africa (STANSA).
7th ed. Pretoria: STANSA, 2005.
TISI Library Accession List (Jan-Mar 2007) Page 61
มาตรฐานไทย
กระดก - การรกษา
มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทางศลยกรรมกระดก
การฆาเชอ มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครอง
มอแพทย
มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมนและแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ
การรบกวนคลนวทย มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4
อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก
มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ
มอก. 1441 ล.1 2548 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-1อปกรณวดสญญาณรบกวนวทยและภมคมกน - อปกรณวด
มอก. 1441 ล.3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-3อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - ก าลงไฟฟารบกวน
มอก. 2092 ล. 2 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-2วธการวดของสญญาณรบกวนและภมคมกน - การวดก าลงไฟฟารบกวน
มอก. 2092 ล. 3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2- 3วธการวดของสญญาณรบกวนและภมคมกน - การวดสญญาณรบกวนทแผออก
มอก. 2092 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-4วธการวดของสญญาณรบกวนและภมคมกน - การวดภมคมกน
การรบกวนทางแมเหลกไฟฟา มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4
อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก
TISI Library Accession List (Jan-Mar 2007) Page 62
มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ
มอก. 1441 ล.1 2548 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-1อปกรณวดสญญาณรบกวนวทยและภมคมกน - อปกรณวด
มอก. 1441 ล.3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-3อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - ก าลงไฟฟารบกวน
มอก. 2092 ล. 2 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-2วธการวดของสญญาณรบกวนและภมคมกน - การวดก าลงไฟฟารบกวน
มอก. 2092 ล. 3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2- 3วธการวดของสญญาณรบกวนและภมคมกน - การวดสญญาณรบกวนทแผออก
มอก. 2092 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-4วธการวดของสญญาณรบกวนและภมคมกน - การวดภมคมกน
คลนแมเหลกไฟฟา มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4
อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก
มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ
มอก. 1441 ล.1 2548 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-1อปกรณวดสญญาณรบกวนวทยและภมคมกน - อปกรณวด
มอก. 1441 ล.3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-3อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - ก าลงไฟฟารบกวน
มอก. 2092 ล. 2 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-2วธการวดของสญญาณรบกวนและภมคมกน - การวดก าลงไฟฟารบกวน
มอก. 2092 ล. 3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2- 3วธการวดของสญญาณรบกวนและภมคมกน - การวดสญญาณรบกวนทแผออก
มอก. 2092 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-4วธการวดของสญญาณรบกวนและภมคมกน - การวดภมคมกน
TISI Library Accession List (Jan-Mar 2007) Page 63
คลนวทย มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4
อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5
อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ
มอก. 1441 ล.1 2548 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-1อปกรณวดสญญาณรบกวนวทยและภมคมกน - อปกรณวด
มอก. 1441 ล.3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-3อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - ก าลงไฟฟารบกวน
มอก. 2092 ล. 2 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-2วธการวดของสญญาณรบกวนและภมคมกน - การวดก าลงไฟฟารบกวน
มอก. 2092 ล. 3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2- 3วธการวดของสญญาณรบกวนและภมคมกน - การวดสญญาณรบกวนทแผออก
มอก. 2092 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-4วธการวดของสญญาณรบกวนและภมคมกน - การวดภมคมกน
เครองเขยน มอก. 2275 2549 สพาสเทลน ามน
เครองแตงกาย มอก. 2261 2549 เสอชนในชาย มอก. 2262 2549 กางเกงชนในชาย
เครองมอและอปกรณส านกงาน มอก. 2275 2549 สพาสเทลน ามน
เครองส าอาง มอก. 45 2549 ยาสฟน
โคมไฟ - ยานยนต มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง
มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถของยานยนตและสวนพวง
TISI Library Accession List (Jan-Mar 2007) Page 64
โคมไฟ - รถยนต มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง
มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถของยานยนตและสวนพวง
ฉนวนกนความรอน มอก. 1384 2548 ฉนวนกนความรอนพอลเอทลนโฟม
ชดใหสารละลาย มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต
ถงน า มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว
ถานกมมนต มอก. 900 2547 ถานกมมนต
ทนตอนามย มอก. 42 2548 แปรงสฟน
มอก. 45 2549 ยาสฟน
น าดม มอก. 257 2549 น าบรโภค
บรรจภณฑ มอก. 2182 2547 ถวยแกวตวงยา
มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมนและแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ
มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว
ประต - รถยนต มอก. 1162 2548 อปกรณลอกประตและอปกรณยดประตของยานยนต
ปายทะเบยนรถ มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง
TISI Library Accession List (Jan-Mar 2007) Page 65
ปโตรเลยม มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล
เฟอร - การวเคราะหแบบดอกเตอร
แปรงสฟน มอก. 42 2548 แปรงสฟน
ผลตภณฑจากเนอสตว มอก. 1219 2547 แหนม
ผลตภณฑท าความสะอาด มอก. 2274 2549 ผลตภณฑฟอกผาประเภทเพอรออกไซด
ผลตภณฑปโตรเลยม มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล
เฟอร - การวเคราะหแบบดอกเตอร
ผลตภณฑฟอกผา มอก. 2274 2549 ผลตภณฑฟอกผาประเภทเพอรออกไซด
ภาชนะบรรจน า มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว
ภาชนะบรรจยา มอก. 2182 2547 ถวยแกวตวงยา
ภาชนะพลาสตก มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว
ยางมะตอย มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา
ยานยนต - ชนสวน มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง
TISI Library Accession List (Jan-Mar 2007) Page 66
มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถของยานยนตและสวนพวง
ยาสฟน มอก. 45 2549 ยาสฟน
รถยนต - การบ ารงรกษาและซอมแซม มอก. 2252 2548 สารขดเงาสรถยนต มอก. 2265 2549 สารขดเรยบสรถยนต
รถยนต - ชนสวน มอก. 1162 2548 อปกรณลอกประตและอปกรณยดประตของยานยนต มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถ
ของยานยนตและสวนพวง
รถยนต - ผลตภณฑบ ารงรกษาและซอมแซม มอก. 2252 2548 สารขดเงาสรถยนต มอก. 2265 2549 สารขดเรยบสรถยนต
รถยนต - สารขดเงา มอก. 2252 2548 สารขดเงาสรถยนต
วสดและอปกรณกอสราง มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา
วสดและอปกรณงานทาง มอก. 415 2548 สจราจร
วสดและอปกรณทางการแพทย มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง
ศลยกรรมกระดก มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต มอก. 2182 2547 ถวยแกวตวงยา
TISI Library Accession List (Jan-Mar 2007) Page 67
มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครองมอแพทย
มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมนและแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ
วสดโลหะ - ศลยกรรม มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง
ศลยกรรมกระดก
วารนช มอก. 2268 ล.1 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 1 วธแตกตาง
มอก. 2268 ล.2 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 2 วธกาซโครมาโทกราฟฟค
มอก. 2269 2549 สและวารนช - การทดสอบความทนการขดถแบบเปยก และการท าความสะอาดไดของผวเคลอบ
มอก. 2270 2549 สและวารนช - การหาความแขงของผวเคลอบ โดยทดสอบดวยดนสอ
มอก. 2271 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยไดของสอมลชน ทมสารประกอบอนทรยทระเหยไดปรมาณต า (สอมลชนทมน าเปนตวท าละลาย)
มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง
มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ
วธทดสอบ มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล
เฟอร - การวเคราะหแบบดอกเตอร
มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง
มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ
เวชภณฑ มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง
ศลยกรรมกระดก มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต มอก. 2182 2547 ถวยแกวตวงยา
TISI Library Accession List (Jan-Mar 2007) Page 68
มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครองมอแพทย มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมน
และแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ
ศพทบญญต มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต /
สารขดเรยบ มอก. 2265 2549 สารขดเรยบสรถยนต
สารดดกลน มอก. 900 2547 ถานกมมนต
ส มอก. 2268 ล.1 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 1 วธแตกตาง มอก. 2268 ล.2 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 2 วธกาซโครมาโทกราฟฟค มอก. 2269 2549 สและวารนช - การทดสอบความทนการขดถแบบเปยก และการท าความสะอาดไดของผวเคลอบ มอก. 2270 2549 สและวารนช - การหาความแขงของผวเคลอบ โดยทดสอบดวยดนสอ มอก. 2271 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยไดของสอมลชน ทมสารประกอบ
อนทรยทระเหยไดปรมาณต า (สอมลชนทมน าเปนตวท าละลาย) มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ มอก. 415 2548 สจราจร
สชอลก มอก. 2275 2549 สพาสเทลน ามน
เสอผา มอก. 2261 2549 เสอชนในชาย มอก. 2262 2549 กางเกงชนในชาย
หนากากกรองอากาศ มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต
หนากากกรองอากาศ - ศพทบญญต มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต
TISI Library Accession List (Jan-Mar 2007) Page 69
หลอดไฟฟา - ยานยนต มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง
หองปฏบตการ มอก. 2276 2549 หองปฏบตการทางการแพทย - ขอก าหนดดานความปลอดภย
แหนม มอก. 1219 2547 แหนม
อปกรณสองสวาง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง
อปกรณสะทอนแสง มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง
แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต มอก. 2273 2549 แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต ส าหรบอตสาหกรรม
แอสฟลต มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา
TISI Library Accession List (Jan-Mar 2007) Page 70
ALPHABETACAL SUBJECT INDEX
Subject Page
Abrasion 1
Accident prevention 1
Acoustics 1
Agricultural products 1
Air freighters 1
Air treatment devices 2
Air valves 2
Air valves - Waterworks 2
Aircraft components 2
Alarm systems 2
Aluminium alloys 3
Arc lamps 3
Armoured cables 3
Asbestos cement 3
Audio equipment 3
Audiometers 3
Audiometry 4
Auditory threshold 4
Autotransformers 4
Ball valves 4
Barrels (containers) 4
Bars (materials) 4
Beams 5
Billets 5
Biological analysis and testing 5
Blooms 5
Brakes 5
Braking system components 5
TISI Library Accession List (Jan-Mar 2007) Page 71
Subject Page
Bricks 6
Buildings 6
Butterfly valves 6
Calibration 6
Cards 6
Castings 7
Cement mortar 7
Cements 7
Check valves 7
Cheese 8
Chemical analysis and testing 8
Chemical reagents 8
Chlorides 8
Clay 8
Cleaning materials 8
Cloth 8
Clothing 9
Coated fabrics 9
Coating processes 9
Coatings 9
Cobalt alloys 10
Coded representation 10
Codes 10
Coffee 10
Colour-fastness tests 10
Compressed gases 10
Compressed gases - Automative fuels 11
Compressed gases - Quality 11
Concentration (chemical) 11
Concretes 11
TISI Library Accession List (Jan-Mar 2007) Page 72
Subject Page
Construction equipment 11
Cooking appliances 11
Corrosion protection 12
Cranes 12
Curing (concrete) 12
Dangerous materials 12
Data processing 13
Data transmission 13
Density measurement 13
Diagrams 13
Dimensional coordination 13
Dimensional measurement 13
Disinfectants 13
Dried foods 14
Drum brakes 14
Dry-type transformers 14
Electric cables 14
Electric conductors 14
Electric connectors 14
Electric control equipment 15
Electric convertors 15
Electric lamps 15
Electric plugs 15
Electric sockets 15
Electrical appliances 16
Electrical engineering 16
Electrical household appliances 16
Electrical insulation 16
Electrical measuring instruments 16
Electrical safety 17
TISI Library Accession List (Jan-Mar 2007) Page 73
Subject Page
Electrical transmission systems 17
Electrically-operated devices 17
Electromagnetic compatibility (EMC) 18
Electronic connectors - Fibre optics 18
Electronic equipment and components 18
Emergency equipment 18
Emission 18
Essential oils 19
Explosive atmospheres 19
Fabric testing 19
Fire detectors 19
Fire extinguishers 19
Fire hydrants 19
Fire resistance 20
Fire safety 20
Fish (meat) 20
Flanges 20
Flexible pipes 20
Flow measurement 20
Food products 21
Freezig point 21
Frozen foods 21
Fruit juices 21
Fuse-links 21
Fuses 21
Fusion welding 21
Gate valves 22
Gear boxes 22
Gear drives 23
Glycerol 23
TISI Library Accession List (Jan-Mar 2007) Page 74
Subject Page
Graphic symbols 23
Grinding machines (tools) 23
Hand-held tools 23
Hardness testing 24
Health and safety requirements 24
Helmets (protective) 24
High-voltage tests 24
Hosiery 24
Hot-dip coatig 24
Household electrical appliances 25
Humidifiers 25
Hydraulic transmission systems 25
Identity cards 25
Implants (surgical) 26
Information exchange 26
Information technology 26
Insects 27
Insulating oils 27
Internal combustion engines 27
Iron 27
Joints 27
Kitchen utensils 27
Knitted fabrics 28
Knoop hardness measurement 28
Labelling 28
Laboratories 28
Laboratory accreditation 28
Laboratory equipment 29
Laboratory glassware 29
Laces (footwear) 29
TISI Library Accession List (Jan-Mar 2007) Page 75
Subject Page
Lacquers 29
Laminates 29
Lamps 29
Lasers 30
Latices 30
Leather 30
Lifting 30
Lifting equipment 30
Lightning 30
Lightning protection 31
Linear measurement 31
Liquefied petroleum gas 31
Liquid chromatography 31
Low-temperature testing 31
Low-voltage installations 31
Machine-readable materials 32
Machine tools 32
Marks 32
Meat 32
Meat products 32
Mechanical properties of materials 32
Metal coatings 32
Metals 33
Milk 33
Mosquito mats 33
Natural gas 33
Natural rubber 34
Nickel 34
Nickel containing alloys 34
Non-volatile matter determination 34
TISI Library Accession List (Jan-Mar 2007) Page 76
Subject Page
Occupational safety 34
Open systems interconnection 34
Optical fibres 35
Optical scanners 35
Outlet connections 35
Packaging 35
Packaging - Testing 35
Paints 35
Palm kernel oil 36
Paper pulp 36
Petrol engines 36
Petroleum products 36
Pigments 36
Pilling tests 36
Pineapples 37
Pipe fittings 37
Pipelines 37
Pipes 37
Pipework systems 38
Piping 38
Piston rings 38
Plastics 38
Plastics and rubber technology 38
Plug valves 38
Plywood 39
Porous materials 39
Potentiometric methods 39
Preservation 39
Pressure equipment 39
Pressure pipes 39
TISI Library Accession List (Jan-Mar 2007) Page 77
Subject Page
Pressure vessels 40
Processed foods 40
Protective coatings 40
Quality assurance 41
Quantitative analysis 41
Radio disturbances 43
Receivers 43
Receivers - Measurement 43
Refractory materials 43
Refuelling stations 43
Reinforcing materials 43
Relishes (food) 44
Road vehicles 44
Room humidifiers 44
Rubber 44
Safety measures 44
Sampling methods 45
Sanitary appliances 45
Savoury sauces 45
Scouring powder 45
Sealers 45
Sections (structures) 45
Sheet materials 45
Shell fish 46
Shielding (Electricity) 46
Shower baths 46
Shrimps 46
Signal devices 46
Silicon 46
Sockets 46
TISI Library Accession List (Jan-Mar 2007) Page 78
Subject Page
Sound broadcasting 47
Sound generators 47
Steels 47
Storage batteries 47
Structural design 47
Structural steels 47
Structural timber 48
Structures 49
Surface treatment 49
Switchgear 49
Switchgear - High voltage 49
Television broadcasting 49
Television receivers 50
Temperature control 50
Test equipment 50
Testing 50
Testing conditions 50
Textile fibres 51
Textile machinery and accessories 52
Textile testing 52
Textiles 53
Thermal cutting 55
Thermistors 55
Tin alloys 55
Toasters 55
Tomatoes 55
Toroidal sealing rings 55
Toys 56
Transformers 56
Unalloyed steels 56
TISI Library Accession List (Jan-Mar 2007) Page 79
Subject Page
Vacuum devices 56
Valves 56
Valves for water supply in buildings 57
Varnishes 57
Vehicle lights 57
Vehicles 57
Video signals 57
Vitrified china 57
Vocabulary 58
Volume measurement 58
Vulcanized rubber 58
Warning devices 58
Washing machines 58
Water 58
Water purification 59
Water treatment 59
Water works 59
Wear resistance 59
Welding 59
Wire ropes 60
Wood 60
TISI Library Accession List (Jan-Mar 2007) Page 80
หวเรอง
หวเรอง หนากระดก - การรกษา 61การฆาเชอ 61การรบกวนคลนวทย 61การรบกวนทางแมเหลกไฟฟา 61คลนแมเหลกไฟฟา 62คลนวทย 63เครองเขยน 63เครองแตงกาย 63เครองมอและอปกรณส านกงาน 63เครองส าอาง 63โคมไฟ - ยานยนต 63โคมไฟ - รถยนต 64ฉนวนกนความรอน 64ชดใหสารละลาย 64ถงน า 64ถานกมมนต 64ทนตอนามย 64น าดม 64บรรจภณฑ 64ประต - รถยนต 64ปายทะเบยนรถ 64ปโตรเลยม 65แปรงสฟน 65ผลตภณฑจากเนอสตว 65
TISI Library Accession List (Jan-Mar 2007) Page 81
หวเรอง หนาผลตภณฑท าความสะอาด 65ผลตภณฑปโตรเลยม 65ผลตภณฑฟอกผา 65ภาชนะบรรจน า 65ภาชนะบรรจยา 65ภาชนะพลาสตก 65ยางมะตอย 65ยานยนต - ชนสวน 65ยาสฟน 66รถยนต - การบ ารงรกษาและซอมแซม 66รถยนต - ชนสวน 66รถยนต - ผลตภณฑบ ารงรกษาและซอมแซม 66รถยนต - สารขดเงา 66วสดและอปกรณกอสราง 66วสดและอปกรณงานทาง 66วสดและอปกรณทางการแพทย 66วสดโลหะ - ศลยกรรม 67วารนช 67วธทดสอบ 67เวชภณฑ 67ศพทบญญต 68สารขดเรยบ 68สารดดกลน 68ส 68สชอลก 68
TISI Library Accession List (Jan-Mar 2007) Page 82
หวเรอง หนาเสอผา 68หนากากกรองอากาศ 68หนากากกรองอากาศ – ศพทบญญต 68หลอดไฟฟา - ยานยนต 69หองปฏบตการ 69แหนม 69อปกรณสองสวาง 69อปกรณสะทอนแสง 69แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต 69แอสฟลต 69