Premium Industrial Cutting Tools
TOOLING SYSTEMS INC.
Contents
Rip Blades
Gang Rip Blades
Glue Line Rip Blades
General Purpose Blades
Standard Cross Cut Blades
Combination/Planer Style Blades
Precision Trim Blades
Finish Trim Blades
Laminate & Veneer Blades
Production Miter Box Blades
Radial Arm/Miter Saw Blades
Portable Miter Blades
Portable Miter/Table Saw Blades
Thin Kerf Beam Saw Blades
Low Melt Plastic/Solid Surface Cutting
Rescue Blades
Non Ferrous Metal Cutting Blades
Non Ferrous Metal Cutting Blades
High Production Steel Cutting Blades
Portable Steel Cutting Blades
Scoring Blades
Edge Banding Blades
Panel Sizing Blades
T-Series Dado Head Blades
Groovers
Skarpaz C-Line Blades
Stellite Tipped Resaw Bandsaw Blades
Carbide Tipped Knives
High Speed Steel Knives
1
2
2
3
3
4
4
5
5
6
6
7
7
7
8
8
9
10
11
11
12
12
13
14
14
15
15
16
16
Skarpaz blades are made with state of the art manufacturing equipment and production techniques using the finest saw materialsavailable. All Skarpaz blades feature the following qualities.
Laser cut saw bodies designed on an in-house computer aideddesign system cut from world class European alloy tool steel.
European C-3, sub micron corrosion resistant, or specialty grades for maximum edge and tool life.
Every saw plate is surface ground for an exceptionally flat plate.
Every blade is individually roll and hammer tensioned by skilledhammer smiths.
Tri-Metal brazing of carbide tips on fully automated inductionbrazing machines.
Honed arbor holes to H-7 tolerance to ensure precise arbor fit.
Precision sharpening on automatic CNC machines ensuring accurateand consistent cutting angles.
All Skarpaz Blades are 100% guaranteed for thelife of the blade against material or manufacturing defect.
For blades to achieve their optimum performance, the appropriate hook angle and tooth grind must beconsidered. In the following pages, hook angle and tooth style will be listed together.For Example:
20 hook + straight top grindo
20 o
15o
o15
-5 o
LRCR
ATB+R
-5 o
Hook Angles
Hook + Tooth Style General Application Grind
20 o
ST
30o
-5 o
30o
LRTCG
10o
20 o
ATB
15 o
CMB
45o
20 o
TCG
LRCR: -5 degree hook + 30 degree top bevel
ATB+R: 0 to -2 hook + alternate top bevels + raker tooth
ST: 20 degree hook + square top
LRTCG: 0 to -5 hook + three alternately chamfered teeth
ATB: -5 to 20 hook + alternate top bevels
CMB: 15 degree hook + alternate top bevels + raker tooth
TCG: -5 hook to 20 hook + triple chip grind
Double sided laminates
Mitering picture frame moldings
Rip cuts in solid wood
Non ferrous metal
Rip and cross cuts in solid wood
Rip and cross cuts in solid wood
Non ferrous, plastics, laminates, hardwoods
*
*
Materials Suggested:
Rip
Bla
des
Table SawStraight Line Rip SawGang Rip Saw
Machine Types Suggested:
HardwoodSoftwood
Rip Blades - Flat Top GrindRipping of hard and softwoods. Suitable for both hand and power feed applications. Can be modified for gang ripping applications.
Part# Dia. Tooth Grind Plate Kerf Bore
Rip Blades - With Chip GuidesSpecially designed for hand feed applications. The unique shoulder designaids in reducing possible “kick back” of material.
Part# Dia. Tooth Grind Plate Kerf Bore
Page 1
R824
R924
HD1010
R1024
HD1024R3030
HD1212
R1224HD1224
HP1224
R1230
HP1230
R1236HD1236
HD1420
HD1430
HP1430
HD1440HD1630
R1640
HP1640
8"
9"
10"
10"
10"300
12"
12"12"
12"
12"
12"
12"12"
14"
14"
14"
14"16"
16"
16"
24T
24T
10T
24T
24T30T
12T
24T24T
24T
30T
30T
36T36T
20T
30T
30T
40T30T
40T
40T
20S T
20S T
20S T
20S T
20S T20S T
20S T
20S T20S T
20S T
20S T
20S T
20S T20S T
20S T
20S T
20S T
20S T20S T
20S T
20S T
.085
.085
.095
.085
.095 2.2
.110
.085
.095
.110
.085
.134
.085
.095
.120
.110
.134
.110
.120
.120
.134
.125
.125
.145
.125
.1453.2
.160
.125
.145
.160
.125
.184
.125
.145
.160
.160
.184
.160
.165
.165
.184
5/8"
5/8"
5/8"
5/8"
5/8"30mm
1"
1"1"
1"
1"
1"
1"1"
1"
1"
1"
1"1"
1"
1"
R3030 has pinholes 2/10/60. R1836-2 has 1 - 9/16” pinhole-5” circle.
R1836R1836-2
R2040
18"18"
20"
36T36T
40T
20S T20S T
20S T
.134
.134
.134
.184
.184
.184
1"2"
1"
S R 1024A 10" 24T 20ATB-S .085 .125 5/8"
S R 1224A-125 12" 24T 20ATB-S .085 .125 1"
S R 1224A-145 12" 24T 20ATB-S .095 .145 1"
Ultra Thin Rip BladesIdeal for ripping on under powered saws or moulders. A thinner kerf allowsfor less feed effort and saves wood! For maximum performance use with saw stabilizers.
Part# Dia. Tooth Grind Plate Kerf BoreU824 8" 24T 20ATB .059 .090 5/8"
U1024 10" 24T 20ATB .059 .090 5/8"
U1224 12" 24T 20S T .060 .090 1"
10o
15o
20 o
ATB
20 o
15o
ST
**
Materials Suggested:
Machine Types Suggested:
Gan
g R
ip B
lade
s
Table SawStraight Line Rip SawGang Rip Saw
HardwoodSoftwood
Gang Rip Blades
Part# Dia. Tooth Grind Plate Kerf Bore Keys/Pins
Part# Dia. Tooth Grind Plate Kerf Bore Keys/Pins
Blades are designed for Domestic and European multi-rip machines. Offered in a variety ofkerfs and tooth counts to suit many unique requirements. Other rip blades can be modifiedto fit your machine.
Gang Rip Blades - Glue Line RipBlades are designed for Domestic and European multi -rip machines. Triple Chip Grind (TCG) is recommended for hardwoods and composite boards and will produce a “glue joint”cut. Offered in a variety of kerfs and tooth counts to suit many unique requirements. Other rip blades can be modified to fit your machine.
Glue Line Rip Blades - Straight Line Rip
Part# Dia. Tooth Grind Plate Kerf Bore
To be used where a “glue joint” is required. Triple Chip Grind (TCG) is recommended for hardwoods and composite boards. Alternate Top Bevel (ATB) recommended for softer woods.
Glu
e Li
ne R
ip B
lade
s
45o
15o
20 o
TCG
GR1030 10" 30T 20S T .095 .135 70mm (2) 20x10GR1040T-3 10" 40T 15TC G .085 .125 3" 3 pins
GR1040T-4 10" 40T 15TC G .085 .125 4 3/16" 3 pins
GR1224-125 12" 24T 20S T .085 .125 70mm (2) 20x10
GR1224-145 12" 24T 20S T .095 .145 70mm (2) 20x10
GR1224-134 12" 24T 20S T .095 .145 1 3/4" noneGR1224-318 12" 24T 20TC G .095 .135 3.1/8" none
GR1228 12" 28T 20S T .110 .160 80mm (2) 20X5 +6 pins
GR1230-134 12" 30T 20S T .134 .184 1 3/4" noneGR1236 12" 36T 20S T .095 .135 3.1/8" noneGR3070 300 30T 20S T 2.8 4.3 70mm (2) 20x10
GR1040T-318 10" 40T 15TC G .085 .125 3 1/8" (2) 1/4"X1/4"GR3060 300 36T 20TC G 2.8 4.0 60mm (2) 20x10
GR1236T-125 12" 36T 20TC G .085 .125 3.1/8" (2) 1/4"X1/4"
GR1236T-70 12" 36T 20TC G .095 .145 70mm (2) 20x10
GR1236T-80 12" 36T 20TC G .110 .160 80mm (2) 20X5 +6 pins
GR1236T-160 12" 36T 20TC G .110 .160 3.1/8" (2) 1/4"X1/4"
GR1236T-170 12" 36T 20TC G .120 .170 3.1/8" (2) 1/4"X1/4"
GR1248T-80 12" 48T 20TC G .110 .160 80mm (2) 20X5 +6 pins
GR3570 350 36T 20TC G 3.2 4.3 70mm (2) 20x10
GR1436T 14" 36T 20TC G .120 .176 3.1/8" (2) 1/4"X1/4"
G1024A-125 10" 24T 20ATB .085 .125 5/8"G1030T 10" 30T 20TC G .095 .145 5/8"
G1224A 12" 24T 20ATB .095 .145 1"
G1230T 12" 30T 20TC G .110 .160 1"
G1236T-160 12" 36T 20TC G .110 .160 1"
G1236T-170 12" 36T 20TC G .120 .170 1"
G1436T 14" 36T 20TC G .120 .165 1"
G1436T-112 14" 36T 20TC G .120 .165 1.1/2"
G1436T-2 14" 36T 20TC G .120 .165 2"
G1440T 14" 40T 20TC G .110 .160 1"
G1440A 14" 40T 20ATB .110 .160 1"
G1636T 16" 36T 20TC G .120 .170 1"
G1636T-2 16" 36T 20TC G .120 .170 2"
G1836T 18" 36T 20TC G 134 .184 1"G1836T-2 18" 36T 20TC G 134 .184 2"
*
*
**
Page 2
20 o
15o
ST
All blades with 2” bore come standard with 9/16” pinhole.
Materials Suggested:Gen
eral
Pur
pose
Bla
des
Machine Types Suggested:
General Purpose Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Standard Cross Cut BladesIdeal all around cabinet maker blade. Clean cross cutting on all types of wood,particle board, plywood, and plastic laminated (single sided) panels.
Ripping and cross cutting blades when a higher feed rate is required. A goodall around blade for both ripping and cross cutting.
Part# Dia. Tooth Grind Plate Kerf Bore
Table SawRadial Arm SawMiter SawStraight Line Rip
ATB = Hardwood SoftwoodTCG = Single Sided Laminate Hardwood Plywood Particleboard MDF
Stan
dard
Cro
ss C
ut B
lade
s
GP7A 7.1/4" 24T 15ATB .085 .125 5/8"GP840A 8" 40T 10ATB .085 .125 5/8"
GP840T 8" 40T 10TC G .085 .125 5/8"
GP940A 9" 40T 10ATB .085 .125 5/8"
GP940T 9" 40T 10TC G .085 .125 5/8"
GP1040A 10" 40T 10ATB .085 .125 5/8"
GP1040T 10" 40T 10TC G .085 .125 5/8"
GP1240A 12" 40T 10ATB .095 .135 1"
GP1240T 12" 40T 10TC G .095 .135 1"GP1248A 12" 48T 10ATB .095 .135 1"
GP1448A 14" 48T 10ATB .098 .138 1"
GP1440T 14" 40T 10TC G .110 .160 1"
GP1640A 16" 40T 10ATB .120 .165 1"
GP1640T 16" 40T 10TC G .120 .165 1"
GP1848A 18" 48T 10ATB .134 .184 1"
GP 2260A 22" 60T 15ATB .150 .200 1"
GP2460A-184 24" 60T 15ATB .134 .184 1"GP2460A-200 24" 60T 15ATB .150 .200 1"
S C740A 7.1/4" 40T 10ATB .085 .125 5/8"S C740T 7.1/4" 40T 10TC G .085 .125 5/8"
S C860A 8" 60T 10ATB .085 .125 5/8"
S C860T 8" 60T 10TC G .085 .125 5/8"
S C960A 9" 60T 5ATB .085 .125 5/8"
S C1060A 10" 60T 10ATB .085 .125 5/8"
S C1060A-3/4 10" 60T 10ATB .085 .125 3/4"
S C1060A-1 10" 60T 10ATB .085 .125 1"
S C1060T 10" 60T 10TC G .085 .125 5/8"S C1060T-1 10" 60T 10TC G .085 .125 1"
S C1260A 12" 60T 10ATB .095 .135 1"
S C1260T 12" 60T 10TC G .095 .135 1"
S C1460A-138 14" 60T 10ATB .098 .138 1"
S C1460A-160 14" 60T 10ATB .110 .160 1"
S C1460T-138 14" 60T 10TC G .098 .138 1"S C1460T-160 14" 60T 10TC G .110 .160 1"
S C1472A 14" 72T 10ATB .118 .173 1"
S C1560A 15" 60T 5ATB .110 .160 1"
S C1660A-165 16" 60T 10ATB .120 .165 1"
S C1660A-184 16" 60T 10ATB .134 .184 1"
S C1660T 16" 60T 10TC G .120 .165 1"
S C1865A 18" 60T 5ATB .134 .184 1"S C1861A 18" 60T 10ATB .134 .184 1"
S C1860T 18" 60T 5TC G .134 .184 1"
S C2060A 20" 60T 5ATB .134 .184 1"
S C2060T 20" 60T 5TC G .134 .184 1"
S C2280A 22" 80T 10ATB .150 .210 1"S C2480A 24" 80T 10ATB .150 .210 1"
45o
15o
TCG
5 or10 oo
10o
15o
5 or10 oo
ATB
Page 3
Materials Suggested:
Materials Suggested:Pr
ecis
ion
Trim
Bla
des
Machine Types Suggested:
Precision Trim Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Finer cutting than the Standard Cross cut, these blades are ideal for thinner sheets of material. Use ATB for solid wood. Use TCG for chipboard, plywood, particleboard, and other abrasive materials LX blades have sub micron,corrosion resistant carbide for extended life in cutting abrasive materials.
Combination/Planer Style Blades
Part# Dia. Tooth Grind Plate Kerf Bore
One blade that is designed to rip and cross cut. A great all-around blade to doboth jobs.
Com
bina
tion/
Plan
er S
tyle
Bla
des
* 30mm bore blades have 2 pinholes - 10mm dia. - 60mm circle* LX blades have sub - micron corrosion resistant tips.
Table SawMiter SawRadial Arm Saw
ATB = Hardwood SoftwoodTCG = Single Sided Laminate Plywood MDF Particleboard
15 o
15o
Table SawStraight Line Rip SawRadial Arm Saw
HardwoodSoftwoodPlywoodParticleboard
CMBMachine Types Suggested:
CM850 8" 50T 15C MB .085 .125 5/8"
CM1050 10" 50T 15C MB .095 .135 5/8"
CM1040 10" 40T 15C MB .085 .125 5/8"
CM1250 12" 50T 15C MB .095 .135 1"
CM1260 12" 60T 15C MB .095 .135 1"
CM1470 14" 70T 15C MB .120 .165 1"CM1680 16" 80T 15C MB .120 .165 1"
PT1085A 10" 80T 5ATB .085 .125 5/8"PT1085T 10" 80T 5TC G .085 .125 5/8"
PT1272A 12" 72T 10ATB .134 .177 1"
PT1280A 12" 80T 10ATB .095 .135 1"
PT1280T 12" 80T 10TC G .095 .135 1"
LX1280T-1 12" 80T 10TC G .095 .135 1"
LX1280T-30 12" 80T 10TC G .095 .135 30mm
PT1481A-138 14" 80T 10ATB .098 .138 1"
PT1481A-160 14" 80T 10ATB .110 .156 1"
PT1481A-176 14" 80T 10ATB .120 .176 1"
PT1481A-184 14" 80T 10ATB .134 .184 1"
PT1480T-138 14" 80T 10TC G .098 .138 1"
PT1480T-165 14" 80T 10TC G .120 .165 1"PT1483T 14" 80T 10TC G .098 .138 30mm
PT1580A 15" 80T 5ATB .110 .160 1"
PT1680A-165 16" 80T 10ATB .120 .165 1"
PT1680A-184 16" 80T 10ATB .134 .184 1"
PT1680T 16" 80T 10TC G .120 .165 1"
PT1885A 18" 80T 5ATB .134 .177 1"
PT1881A 18" 80T 10ATB .134 .184 1"
PT1880T 18" 80T 10TC G .134 .184 1"
PT2080A-184 20" 80T 10ATB .134 .184 1"
PT2080A-200 20" 80T 10ATB .150 .200 1"
45o
15o
TCG
5 or10 oo
**
*
Page 4
10o
15o
ATB
5 or10 oo
Materials Suggested:
Machine Types Suggested:
Laminate & Veneer Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Finish Trim BladesWhen the finest cut is required on thin material, these blades excel in miter applications or sizing thin sheets of stock.
Cut double sided laminates and veneers chip free without a scoring saw. Anegative hook angle plus a “high” alternate top are featured in this design. LXT carbide is used to prolong edge life between sharpening.
Part# Dia. Tooth Grind Plate Kerf Bore
Table SawMiter SawRadial Arm Saw
ATB = Hardwood SoftwoodTCG = Single Sided Laminate Plywood Particleboard MDF
45o
15o
5 or 10o
o
TCG
Fini
sh T
rim B
lade
s
* LR220 Pinhole 2/7/42* LR250 Pinhole 2/7/42+2/10/60* LR3096 Pinhole 2/10/60
Lam
inat
e &
Ven
eer B
lade
s
Materials Suggested:
Machine Types Suggested:
Table SawMiter SawRadial Arm SawVertical Panel SawSliding Table Saw
Single & Double Sided LaminatePlywoodFine Veneer
30o
o
FT100A 10" 100T 0ATB .085 .115 5/8"
FT105A 10" 100T 5ATB .085 .125 5/8"
FT105T 10" 100T 5TC G .085 .125 5/8"FT121A 12" 100T 5ATB .095 .125 1"
FT125T 12" 100T 5TC G .095 .125 1"
FT122A 12" 120T 5ATB .083 .118 1"FT145A 14" 100T 5ATB .110 .156 1"FT141A 14" 100T 10ATB .098 .138 1"
FT141T -138 14" 100T 10TC G .098 .138 1"FT141T -165 14" 100T 10TC G .120 .165 1"
FT142A 14" 120T 0ATB .110 .150 1"FT155A 15" 100T 5ATB .110 .160 1"FT151T 15" 100T 10TC G .110 .160 1"
FT165A 16" 100T 5ATB .120 .165 1"FT165T 16" 100T 5TC G .120 .165 1"
FT162A 16" 120T N5ATB .120 .155 1"FT162T 16" 120T 5TC G .120 .150 1"FT4510A 450 100T 10ATB .134 .177 30MMFT181A 18" 100T 5ATB .134 .177 1"
FT181T 18" 100T 5TC G .134 .177 1"FT182A 18" 120T 5ATB .134 .177 1"
FT182NA 18" 120T N5ATB .134 .177 1"
FT205A 20" 100T 5ATB .134 .173 1"FT201T 20" 100T 5TC G .134 .177 1"FT202A 20" 120T 10ATB .134 .177 1"FT221A 22" 100T 10ATB .150 .200 1"
FT241A 24" 100T 10ATB .150 .200 1"
LR860 8" 60T N5LR C R .085 .115 5/8"
LR220 220MM 64T N5LR C R 2.2 2.9 30MM
LR250 250MM 80T N5LR C R 2.2 2.9 30MM
LR1060 10" 60T N5LR C R .085 .125 5/8"
LR1080 10" 80T N5LR C R .085 .115 5/8"
LR1210 12" 100T N5LR C R .095 .125 1"
LR3096 300MM 96T N5LR C R 2.4 3.2 30MM
LR1410 14" 100T N5LR C R .098 .138 1"
LR1610 16" 120T N5LR C R .120 .150 1"
30
*
*
*
* Pinholes 2/10/60
LRCR
15o
-5 o
10o
15o
0, 5 or 10o
o
ATB
Page 5
Materials Suggested:
Prod
uctio
n M
iter B
ox B
lade
sRa
dial
Arm
/Mite
r Saw
Bla
des
Machine Types Suggested:
Production Miter Box Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Our production miter box blades are designed for stationary, production machinery. These blades incorporate a heavy duty saw plate, special expansionslots, and proven tooth geometry to produce clean accurate and repeatable miters.Use ATB+R for cutting wood and composite materials.
ATB+R
Single Miter SawDouble Miter Saw Radial Arm Saw
Soft woodCompositeHardwoodSingle Sided Laminate
RA860 8" 60T 0ATB .085 .115 5/8"
RA980 9" 80T 0ATB .085 .115 5/8"
RA1060 10" 60T 0ATB .085 .125 5/8"
RA1080 10" 80T 0ATB .085 .125 5/8"RA1230 12" 30T N5ATB .085 .125 5/8"
RA1260 12" 60T 0ATB .085 .125 5/8"
RA1280-5/8 12" 80T 0ATB .095 .135 5/8"
RA1280-1 12" 80T 0ATB .095 .135 1"
RA1436 14" 36T N5ATB .085 .125 1"
RA1460 14" 60T 0ATB .120 .160 1"
RA1480 14" 80T 0ATB .110 .156 1"RA1411 14" 100T 0ATB .098 .138 1"
RA1640 16" 40T 0ATB .134 .184 1"
RA1660 16" 60T 0ATB .120 .165 1"
RA1680 16" 80T 0ATB .120 .165 1"
RA1860 18" 60T 0ATB .134 .184 1"
RA2060 20" 60T 0ATB .134 .184 1"
Radial Arm / Miter Saw BladesNeutral hook angle prevents saw from grabbing material. Select less teeth forthicker material. ATB grind is not suitable for non ferrous metals.
Part# Dia. Tooth Grind Plate Kerf Bore
DM1080A 10" 80T 0ATB+R .098 .116 5/8"DM1280A 12" 80T 0ATB+R .098 .125 5/8"
DM1210A 12" 100T 0ATB+R .100 .120 5/8"
DM1210A-134 12" 100T N2ATB+R .118 .134 5/8"
DM1210A-1 12" 100T N2ATB+R .118 .134 1"
DM1480A 14" 80T 0ATB+R .120 .134 5/8"
DM1410A 14" 100T 0ATB+R .120 .134 5/8"
DM275-80A 275 80T 5ATB+R 2.5 3.2 32mm
DM275 275 100T 0ATB+R 2.5 3.2 32mm
DM3510A 350 100T 0ATB+R 3.2 4.1 30mm
Materials Suggested:
Machine Types Suggested:
Table SawMiter SawRadial Arm Saw
HardwoodSoftwoodSingle Sided LaminatePlywoodParticleboardMDF
10o
ATB
15
o
-5 o
15
o
-5 o
Page 6
Blades for non ferrous metal, composites, and plastic frames can befound in non ferrous metal cutting section on pages 9-10
Port
able
Mite
r/Tab
le B
lade
sTh
in K
erf B
eam
Saw
Bla
des
PU824A 8.1/4" 24T 10ATB .059 .080 5/8"
PS 824T 8.1/4" 24T 10TC G .070 .095 5/8"PS 840A 8.1/4" 40T 10ATB .070 .095 5/8"
PS 860A 8.1/4" 60T 10ATB .070 .095 5/8"
PU860A 8.1/4" 60T 0ATB .059 .090 5/8"
PS 861T 8.1/4" 60T 10TC G .070 .095 5/8"U860A 8" 60T 5ATB .059 .090 5/8"
U1040A 10" 40T 10ATB .059 .090 5/8"
U1040T 10" 40T 10TC G .059 .090 5/8"
U1060A 10" 60T 10ATB .059 .090 5/8"
U1060T 10" 60T 10TC G .059 .090 5/8"
U1081A 10" 80T 10ATB .059 .090 5/8"
U1081T 10" 80T 10TC G .059 .090 5/8"U1260A 12" 60T 10ATB .059 .090 1"
U1280A 12" 80T 10ATB .059 .090 1"
U1280T 12" 80T 5TC G .059 .090 1"
U1210A 12" 100T 5ATB .059 .090 1"
U1210T 12" 100T 5TC G .059 .090 1"
Materials Suggested:
Part# Dia. Tooth Grind Plate Kerf Bore
Portable Miter Blades
Part# Dia. Tooth Grind Plate Kerf Bore
45o
15o
TCG
Part# Dia. Tooth Grind Plate Kerf Bore
Portable Miter/Table Saw Blades
ATB = Hardwood SoftwoodTCG = Single Sided Laminate Plywood Particleboard MDF
Extensive selection of blades to maximize the performance of your saw.
Thin Kerf Beam Saw BladesFor use on Makita Beam Saw.
P836A 8.1/2" 36T 0ATB .070 .095 5/8"P86NA 8.1/2" 60T N5ATB .070 .095 5/8"
P860A 8.1/2" 60T 0ATB .059 .090 5/8"
P1060A 10" 60T 0ATB .059 .090 5/8"
P1080A 10" 80T 0ATB .059 .090 5/8"P108NA 10" 80T N5ATB .085 .120 5/8"
P124NA 12" 40T N5ATB .085 .115 1"
P126NA 12" 60T N5ATB .085 .115 1"P1280A 12" 80T 0ATB .059 .090 1"
P128NA 12" 80T N5ATB .085 .115 1"
P128NAR 12" 80T N5ATB+R .080 .110 1"
P148NA 14" 80T N5ATB .085 .120 1"
P141NA 14" 100T N5ATB .085 .120 1"
P1560A 15" 60T 0ATB .070 .110 1"
P1580A 15" 80T 0ATB .070 .110 1"
P1510A 15" 100T 0ATB .095 .125 1"
U1636 16.5/16" 36T 20ATB-S .070 .110 25mmU161 16" 60T 20ATB .070 .102 1"U1625 16.5/16" 60T 20ATB .070 .102 25mm
Industrial quality blades for light duty machines.
10o
15o
ATB
Page 7
Materials Suggested:
**
Resc
ue B
lade
s
Machine Types Suggested:
Part# Dia. Tooth Grind Plate Kerf Bore
Table SawMiter SawSliding Compound Miter SawCompound Miter Saw
Low
Mel
t Pla
stic
/Sol
id S
urfa
ce
Low Melt Plastic/Solid Surface Cutting BladesSpecial low melt tooth style provides excellent cuts in wide variety of plastics.LX carbide tips are used on all blades to prolong edge life between sharpening.Thin rim blades feature an integral flange built into the body which significantly strengthens the saw plate while still maintaining a thin kerf.
45o
TC2
15
o
-5 o
LM1040 10" 40T 15TC 2 .092 .127 5/8"LM1072 10" 72T 0TC 2 .100 .125 5/8"
LM1080 10" 80T 5TC 2 .070 .100 5/8"
LM1280 12" 80T 5TC 2 .085 .115 1"LM1284 12" 84T 0TC 2 .100 .125 1"
LM1210 12" 100T N2TC 2 ..095 .135 1"
LM1410 14" 100T 0TC 2 .098 .138 1"
LM1610 16" 100T N5TC 2 .120 .150 1"
LM3084 300 84T 0TC 2 2.5 3.2 5/8"LM3096 300 96T N5TC 2 2.4 3.2 30mm
2" THIN RIM HUB KERF BORE
LT860 8" 60T 0TC 2 .095 .090 5/8"LT1080 10" 80T 0TC 2 .095 .090 1"
LT1210 12" 100T 0TC 2 .095 .090 1"
Rescue Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Commonly used by fire departments on gas powered saws. 1” to 20mmbushings are available.
NC1024 10" 24T N5S T .085 .125 5/8"NC1212 12" 12T N5S T .085 .125 1"
NC1414 14" 14T N5S T .098 .138 1"
NC1424 14" 24T N5S T .120 .165 20mm
NC1616 16" 16T N5S T .120 .165 1"
Acrylic, Engraving StockLexan, PVCPolycarbonatePolyethylene, Rigid Vinyl
Page 8
* Pinholes 2/10/60
Machine Types Suggested:
Part# Dia. Tooth Grind Plate Kerf Bore
Non Ferrous Metal Cutting Blades An extensive selection of blades designed to cut brass, copper, aluminum andother non ferrous metals. Excellent performance on sheets and extrusions.Heavier plates are used to with-stand the rigors of non ferrous metal cutting. Thin kerf blades should only be used on thin material and must be used only with mechanical clamping and lubricant. All non ferrous cutting should be aidedby flood or spray lubricant. Mechanical clamping is recommended for all blades.
Part# Dia. Tooth Grind Plate Kerf Bore
Table SawMiter SawSliding Compound Miter SawCompound Miter SawDouble Miter SawRadial Arm Saw
Non Ferrous Metal(Aluminum, Brass, Copper, etc.)Hard to Medium PlasticHardwoodMDFSingle Sided LaminateParticleboard
Non
Fer
rous
Met
al B
lade
s
AG3782038 3.7/8" 20T 5TC 2 .110 .135 3/8"
AG3782458 3.7/8" 24T 5TC 2 .110 .135 5/8"AG42034 4" 20T 0TC 2 .095 .125 3/4"AG42078 4" 20T 0TC 2 .095 .150 7/8"
AG42478 4" 24T N2TC 2 .085 .110 7/8"
NF74N 7" 40T N5TC G .085 .115 5/8"CL724T 7.1/4" 24T 0TC G .070 .095 5/8"
CL740T 7.1/4" 40T 0TC G .070 .100 5/8"
CL760T 7.1/4" 60T 0TC G .070 .095 5/8"CL840T 8" 40T 5TC G .070 .095 5/8"
NF860 8" 60T 0TC G .085 .115 5/8"NF86N 8" 60T N5TC G .085 .115 5/8"CL860T 8" 60T 0TC G .070 .095 5/8"
5/8” K .O.= Universal arbor with diamond knockout.
NF88N 8" 80T N2TC G .085 .115 5/8"PS 860T 8.1/4" 60T 0TC G .070 .095 5/8"
P860T 8.1/2" 60T 0TC G .070 .095 5/8"
P86NT 8.1/2" 60T N5TC G .059 .090 5/8"
NF960 9" 60T 0TC G .085 .115 5/8"P1060T 10" 60T 0TC G .059 .090 5/8"NF1060 10" 60T 0TC G .085 .125 5/8"NF106N 10" 60T N5TC G .085 .125 5/8"P1080T 10" 80T 0TC G .059 .090 5/8"
P108NT 10" 80T N5TC G .059 .090 5/8"NF1080 10" 80T 0TC G .095 .125 5/8"
NF108N 10" 80T N5TC G .095 .125 5/8"MN1090 10" 90T N5LR TC G .100 .125 5/8"
P1010T 10" 100T 0TC G .059 .090 5/8"
NF1010 10" 100T 0TC G .095 .125 5/8"NF101N 10" 100T N5TC G .095 .125 5/8"
P126NT 12" 60T N5TC G .085 .115 1"NF1260 12" 60T 0TC G .095 .125 1"
P1272T 12" 72T 0TC G .085 .115 1"P1280T 12" 80T 0TC G .059 .090 1"
DM1280T 12" 80T 0TC G .095 .125 5/8"
NF1280 12" 80T 0TC G .095 .125 1"
NF128N 12" 80T N5TC G .095 .125 1"
MN1290 12" 90T N5LR TC G .110 .135 1"
P1210T 12" 100T 0TC G .059 .090 1"
DM1210T 12" 100T 0TC G .095 .125 5/8"NF1210 12" 100T 0TC G .095 .125 1"NF121N 12" 100T N5TC G .095 .125 1"
DM1210MN 12" 102T N2LR TC G .100 .125 5/8"
DM122N 12" 120T N2TC G .095 .125 5/8"
NF122N 12" 120T N2TC G .095 .125 1"
MN1212 12" 120T N2LR TC G .095 .125 1"
NF1440 14" 40T 0TC G .110 .160 1"
NF1460 14" 60T 0TC G .120 .155 1"
P1480T 14" 80T 0TC G .070 .102 1"
P148NT 14" 80T N5TC G .085 .120 1"
NF1480-30 14" 80T 0TC G .098 .138 30mm
NF1480-138 14" 80T 0TC G .098 .138 1"
NF1480-150 14" 80T 0TC G .120 .150 1"
NF148N 14" 80T N5TC G .120 .155 1"
P1410T 14" 100T 0TC G .070 .102 1"
P141NT 14" 100T N5TC G .085 .120 1"
NF1410-138 14" 100T 0TC G .098 .138 1"
NF1410-150 14" 100T 0TC G .120 .150 1"
NF141N-138 14" 100T N5TC G .098 .138 1"NF141N-150 14" 100T N5TC G .120 .150 1"*
*
*
**
Materials Suggested:
Page 9
15o
-5 o
LRTCG
30o30o
15o
-5 o
TCG
45o
Non Ferrous Metal Cutting Blades
Page 10
Machine Types Suggested:Table SawMiter SawSliding Compound Miter SawCompound Miter SawDouble Miter SawRadial Arm Saw
Non Ferrous Metal(Aluminum, Brass, Copper, etc.)Hard to Medium PlasticHardwoodMDFSingle Sided LaminateParticleboard
Materials Suggested:
15o
-5 o
LRTCG
30o30o
15o
-5 o
TCG
45o
Non
Ferro
us M
etal
Cutti
ng B
lades
Part# Dia. Tooth Grind Plate Kerf Bore
Non Ferrous Metal Cutting Blades
Part# Dia. Tooth Grind Plate Kerf Bore
Non Ferrous Metal Cutting Blades
DM275-80T 275 80T 5TC G 2.5 3.2 32mm
NF2890-32 280 90T 5TC G 2.4 3.2 32mmNF3072-32 300 72T 0TC G 2.2 2.9 32mmMN3096 300 96T N5LR TC G 3.2 3.2 30mm Pins 2/10/60
NF3390 330 90T 5TC G 2.8 3.7 32mm
NF3560-32 350 60T 0TC G 3.2 4.0 32mmNF3580 350 80T 0TC G 2.5 3.5 30mm Pins 2/10/60
NF3580-32 350 80T 0TC G 2.5 3.5 32mm
NF3580-40 350 80T 0TC G 2.5 3.5 40mm Pins: 4/12/64 & 2/8/55MN3590 350 90T N2LR TC G 3.0 3.8 40mm Pins : 4/12/64 & 2/8/55
MN3510 350 108T N2LR TC G 3.0 3.8 40mm Pins : 4/12/64 & 2/8/55NF3510 350 100T 0TC G 2.5 3.5 32mmNF3512 350 120T 0TC G .110 .140 1"
NF3512-32 350 120T N5TC G 2.4 3.2 32mm
NF3811 380 110T N5TC G 3.2 3.8 32mm
NF4040 400 40T 5TC G 2.5 3.5 50mm Pins : 4/15/80
NF4060 400 60T 5TC G 2.5 3.5 50mm Pins : 4/15/80NF4096-30 400 96T 0TC G 3.2 3.8 30mmNF4096-32 400 96T 0TC G 3.0 4.0 32mmNF4096-50 400 96T 0TC G 2.8 3.8 50mm Pins : 4/15/80
NF4012-32 400 120 0TC G 3.0 4.0 32mm
NF4296 420 96T 0TC G 3.2 4.4 30mm
NF4510-50 450 100T 5TC G 3.4 4.4 50mm Pins : 4/15/80NF4510-32 450 108T 5TC G 3.0 4.0 32mmNF420 420 120T 0TC G 3.4 4.4 30mm
NF5020 500 120T 0TC G 3.4 4.4 30mm Pins 2/10/60NF5512 550 120T N5TC G 3.8 5.0 30mm Pins 2/10/60
DM142N 14" 120T N5TC G .110 .140 5/8"NF142N 14" 120T N5TC G .110 .140 1"MN1412 14" 120T N5LR TC G .134 .165 1"NF1580 15" 80T 0TC G .120 .160 1"
NF1630 16" 130T N5TC G .115 .145 30mm
P151NT 15" 100T N5TC G .095 .125 1"NF1510 15" 100T 0TC G .110 .160 1"NF1512 15" 120T 0TCG .110 .150 5/8"
NF1660 16" 60T 0TC G .120 .165 1"
NF1660-205 16" 60T 0TC G .150 .205 1"
NF166N 16" 60T N5TC G .134 .173 1"NF1680 16" 80T 0TC G .120 .150 1"
NF1680-200 16" 80T 0TC G .150 .200 1"NF168N 16" 80T N5TC G .134 .173 1"NF1610 16" 100T 0TC G .120 .155 1"
NF161N 16" 100T N5TC G .134 .173 1"NF1620 16" 120T 0TC G .120 .150 1"NF162N 16" 120T N5TC G .120 .155 1"MN1612 16" 120T 5LR TC G .134 165 1"
NF1836 18" 36T 0TC G .150 .205 1"
NF1840-1 18" 140T N5TC G .115 .145 1"NF1840-30 18" 140T N5TC G .115 .145 30mmNF1860 18" 60T 0TC G .150 .200 1"NF1880 18" 80T 0TC G .134 .173 1"
NF188N 18" 80T N5TC G .150 .200 1"NF1810 18" 100T 0TC G .134 .177 1"
NF1812 18" 120T 0TC G .134 .173 1"NF182N 18" 120T N5TC G .134 .173 1"NF2080 20" 80T 0TC G .145 .195 1"NF2010 20" 100T 0TC G .134 .173 1"
NF201N 20" 100T N5TC G .134 .173 1"
NF2015 20" 150T N5TC G .134 .164 1"
NF2020 20" 120T 0TC G .134 .173 1"NF202N 20" 120T N5TC G .134 .173 1"NF2014 20" 140T N5TC G .134 .173 1"NF2215 22" 150T N5TC G .150 .200 1"NF2415 24" 150T 5TC G .150 .210 1"
Materials Suggested:
Machine Types Suggested:
AmadaWagnerNishijimaTsuneKasto
Mild and Carbon SteelStainless Steel
High
Pro
ducti
on S
teel C
uttin
g Blad
esPo
rtabl
e St
eel C
uttin
g Bl
ades
FC748-20 7" 48T .059 .075 20mm
FC748 7 1/4" 48T .059 .075 5/8" KO
FC850 8" 50T .047 .063 5/8"
FC948 9" 48T .063 .080 1"
FC1260 12" 60T .063 .080 1"
FC1276 12" 76T .063 .080 1"
FC1470 14" 70T .079 .106 1"
FC1484 14" 84T .086 .106 1"
FC850 max RPM 3000; FC948 max RPM 2700; FC1260 & FC1276 max RPM 1800; FC1484 max RPM 1500
FC2506040 250MM 60T 2.0 40MM
FC2508032 250MM 80T 2.0 32MM
FC2508040 250MM 80T 2.0 40MM
FC2856032 285MM 60T 2.0 32MM
FC2856040 285MM 60T 2.0 40MM
FC2858032 285MM 80T 2.0 32MM
FC2858040 285MM 80T 2.0 40MM
FC366040 360MM 60T 2.6 40MM
FC366050 360MM 60T 2.6 50MM
FC368040 360MM 80T 2.6 40MM
FC368050 360MM 80T 2.6 50MM
FC361040 360MM 100T 2.6 40MM
FC361050 360MM 100T 2.6 50MM
Portable Steel Cutting BladesCarbide tips specifically designed for ferrous metal cutting and special toothgeometry enable these blades to produce clean fast cutting in mild steel.For use on low rpm machines only. Do not use on woodworking machinery.(FC748 can be used on woodworking saws)
Part# Dia. Tooth Plate Kerf Bore
High Production Steel Cutting BladesCarbide and Cermet Tipped Steel Cutting Blades. Blades for Amada, Wagner, Nishijima, Tsune, and Kasto machines are available. These thinkerf steel cutting blades are specifically designed for high production cutting of billets, pipes, and various steel shapes.
Part# Dia. Tooth Kerf Bore
Materials Suggested:
Machine Types Suggested:Low RPM “Dry Cut” SawsDewaltPorter CableMilwaukeeAnd Similar
Mild Steel
Page 11
S PLIT S CORING S ETS
S S 8020 80 2 x 10T 2.8-3.6K 20mm
S S 10034 100 2 x 12T 2.8-3.6K 3/4" S C MI, Delta
S S 10020 100 2 x 12T 2.8-3.6K 20mm S chellingS S 10022 100 2 x 12T 2.8-3.6K 22mmS S 12034 120 2 x 12T 2.8-3.6K 3/4" S C MI
S S 12020 120 2 x 12T 2.8-3.6K 20mm
S S 12022 120 2 x 12T 2.8-3.6K 22mm
S S 12522 125 2 x 12T 2.8-3.6K 22mm
S S 12534 125 2 x 12T 2.8-3.6K 3/4" S C MI
C1253219 125 24T 3.2-4.2K 3/4" S C MI
C1254345 125 24T 4.3-5.3K 45mm
C1254745 125 24T 4.7-5.7K 45mm
C1504330 150 24T 4.3-5.3K 30mm Mayer
C1504332 150 24T 4.3-5.3K 1.1/4" S C MI
C1504345 150 34T 4.3-5.3K 45mmC1604345 160 28T 4.3-5.3K 45mm
C1604355 160 34T 4.3-5.3K 55mm 3/7/66
C1754745 175 28T 4.7-5.7K 45mm
C1804345 180 34T 4.3-5.3K 45mm
C1804745 180 34T 4.7-5.7K 45mm
C1804450 180 44T 4.3-5.3K 50mm 3/13/95
C2004320 200 34T 4.3-5.3K 20mm S chellingC2004345 200 34T 4.3-5.3K 45mm
C2004745 200 34T 4.7-5.8K 45mm
C2004365 200 34T 4.3-5.3K 65mm 2/9/110
C2154345 215 42T 4.3-5.3K 45mm
C2154350 215 42T 4.3-5.3K 50mm 3/15/80
C3004365 300 48T 4.3-5.3K 65mm 2/9/110
EB1002020 100 20T 10ATB 2.2 3.2 20MM
EB1003030 100 30T 10ATB 1.8 2.4 30MM
EB1004032 100 40T 10ATB 1.8 2.4 32MM
EB1102032 110 20T 10ATB 2.5 3.6 32MM
EB1102022 110 20T 10ATB 2.5 3.6 22MM
EB1202032 120 20T 10ATB 2.2 3.2 32MM
EB1252420 125 24T 10ATB 2.2 3.2 20MM
EB1254L20 125 40T LE FT 2.0 3.2 20MM
EB1254R20 125 40T R IGHT 2.0 3.2 20MM
EB1502L30 150 24T LE FT 2.2 3.2 30MM
EB1502R30 150 24T R IGHT 2.2 3.2 30MM
EB1504822 150 48T 10ATB 2.5 3.5 22MM
EB1602430 160 24T 15ATB 2.2 3.2 30MM
EB1604822 160 48T N5ATB 2.2 3.0 22MM
EB1703L30 170 36T LE FT 2.1 3.1 30MM
EB1703R30 170 36T R IGHT 2.1 3.1 30MM
C as adei, S C MI
Altendorf, Martin
S C MI, Holzher
Altendorf, Martin
Altendorf, Holzher
Giben
Giben
GibenGiben
Gabbiani, S C MI
Holzma
Holzma
Holzma
Giben
Holzma
Holzma
S elco
Holzma
S elco
Part# Dia. Tooth Kerf Range Bore Pinholes Machine
Part# Dia. Tooth Tooth Style Plate Kerf Bore
Scoring Blades - Split Set & Conical Tooth ShapeFor use on saws with scoring attachments. LXT carbide is used to prolong edge life between sharpening.For blades recommendation consult your SKARPAZ dealer.
Scor
ing
Blad
esEd
ge B
andi
ng B
lade
s
Edge Banding BladesBlades for the most common machines. Other sizes can be manufactured upon request. “Left and Right”blades have teeth which are beveled in one direction only.
CONICAL S CORING BLADES
Page 12
Pane
l Sizi
ng B
lade
s DIA. TEETH GRIND PLATE KERF BORE Pinholes
MachineM2264T 220 64T 5TC G .083 .118 30mm 2/7/42
M2264NA 220 64T N5ATB .083 .118 30mm 2/7/42
M2264NT 220 64T N5TC G .083 .118 30mm 2/7/42
LR220 220 64T N5LR C R .083 .118 30mm 2/7/42
M2560T 250 60T 5TC G 2.2 3.2 30mm 2/10/60 + 2/7/42
M2580T 250 80T 5TC G 2.2 3.2 30mm 2/10/60 + 2/7/42
LR250 250 80T N5LR C R 2.2 2.9 30mm 2/10/60 + 2/7/42
M3060A 300 60T 5ATB 2.2 3.2 30mm
M3060T 300 60T 10TC G 3.2 4.4 30mm 2/10/60 Mayer, SCM
M3072A 300 72T 10ATB 2.2 3.2 30mm
LX3072 300 72T 10TC G 2.2 3.2 30mm 2/10/60
M3072T-65 300 72T 10TC G 3.2 4.4 65mm 2/8.5/110
M3072T-75 300 72T 10TC G 3.2 4.4 75mm
M3072T-80 300 72T 10TC G 3.2 4.4 80mm 2/14/110 S C M S igma 65
M3072NT 300 72T N5TC G .100 .130 30mm 2/10/60
M3080-114 300 80T 10TC G 3.2 4.4 1.1/4"
M3096NT 300 96T N5TC G 2.5 3.3 30mm 2/10/60
LR3096 300 96T N5LR C R 2.4 3.2 30mm 2/10/60
M3272T-50 320 72T 12TC G 3.2 4.4 50mm 3/13/95
M3560T 350 60T 10TC G 3.2 4.4 80mm 2/14/110 ; 2/8/110 ; 4/9/100
M3572T-30 350 72T 10TC G 3.4 4.4 30mm
M3572T-114 350 72T 12TC G 3.2 4.4 1.1/4" S CMI
M3596T 350 96T 5TC G 3.4 4.4 30mm
M35560T 350 60T 10TC G 3.2 4.4 75mm
M35572T 350 72T 10TC G 3.2 4.4 75mm
M3772T 370 72T 12TC G 3.2 4.4 30mm S chelling
M3872T 380 72T 10TC G 3.2 4.8 60mm 2/14/125
M4060T-80 400 60T 10TC G 3.2 4.4 80mm 4/9/100, 2/7/110
M4072T-60 400 72T 10TC G 3.2 4.4 60mm Holzma
M4072T-30 400 72T 10TC G 3.2 4.4 30mm S chelling
M4072T-75 400 72T 10TC G 3.2 4.4 75mm 4/15/105
M4072T-80S 400 72T 12TC G 3.2 4.4 80mm 4/19/120, 2/9/130 S elco
M4072T-80G 400 72T 12TC G 3.2 4.4 80mm 4/9/100, 2/14/110, 2/7/110 Gabbiani, S CM
M4372T-80 430 72T 10TC G 3.2 4.4 80mm 2/9/130, 4/19/120 S elco
M4396T 430 96T 10TC G 3.2 4.4 75mm 4/15/105
M4572T-60 450 72T 10TC G 3.4 4.8 60mm 2/14/125
M4572T-75 450 72T 12TC G 3.2 4.4 75mm 4/15/105
M4572T-80 450 72T 12TC G 3.2 4.4 80mm 2/9/130, 4/19/120
M5060T-75 500 60T 12TC G 3.4 4.8 75mmM5060T-60 500 60T 12TC G 3.4 4.8 60mm 2/11/115
M5072T-75 500 72T 12TC G 3.4 4.8 75mm
M5072T-60 500 72T 12TC G 3.4 4.8 60mm 2/11/115
M5272T-60 520 72T 12TC G 3.4 4.8 60mm
M5760A 570 60T 15ATB 3.5 4.5 60mm
Holzher
Holzher
Holzher
Holzher
Streibeg
Streibeg
Selco EB70
Giben
Giben
S CM S igma 90, Gabbiani
Giben
Giben
Holzma
Gabbiani, S CM
Giben
Giben
Holzma
Giben
S elco
GibenHolzma
Giben
Holzma
Holzma
Holzma
Part# Dia. Tooth Grind Plate Kerf Bore Pinholes Machines
Panel Sizing BladesThese blades have been manufactured in accordance with the strict tolerances required to obtain optimum performance from European panel sizing saws. LXT carbide is used to prolong edge holding between sharpenings.
45o
15o
10 or 12 o
o
TCG
30o
LRCR
30o
30o
-5 o
Page 13
These stack dado sets have built their own reputation for reliabilityand accuracy. Extra large carbide tips are used to the outside bladesand chipper teeth. Precision grinding ensures a perfect flat bottom cut dado with slight scribes on both sides of the dado. Packed in awooden storage case. Each set consists of 2 outside blades andthe following 2 wing chippers: 1-1/4” thickness; 2-1/8” thickness; 1-1/16” thickness
T-Se
ries
Dado
Hea
dGr
oove
rsPart# Dia. Tooth Kerf Bore
Part# Dia. Tooth Kerf Bore
Part# Dia. Thickness Bore
T-Series Dado Heads
T8 8" 40T 5/8"
T10 10" 60T 1"
CPT8 8" 1/8" 5/8"
CPT10 10" 1/8" 1"
D630 6" 30T 5/8"D824 8" 24T 5/8"
D8241 8" 24T 1"D840 8" 40T 5/8"
D8401 8" 40T 1"
D840N 8" 40T 5/8"D1024 10" 24T 5/8"
D10241 10" 24T 1"
D1040 10" 40T 5/8"
D10401 10" 40T 1"
D1224 12" 24T 1"
D1240 12" 40T 1"
CP618 6" 1/8" 5/8"
CP10161 10" 1/16" 1"
CP816 8" 1/16" 5/8"
CP10181 10" 1/8" 1"
CP818 8" 1/8" 5/8"
CP10141 10" 1/4" 1"
CP814 8" 1/4" 5/8"
CP1216 12" 1/16" 1"
CP1016 10" 1/16" 5/8"
CP1218 12" 1/8" 1"
CP1018 10" 1/8" 5/8"
CP1214 12" 1/4" 1"
CP1014 10" 1/4" 5/8"
Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16"Max Kerf 13/16"
Max Kerf 13/16"Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16" - 1/64"Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16"
Max Kerf 13/16"
Multi- tooth chippers make these sets well suited for high production grooving in composite materials. This super fine dado set cut smooth,perfect flat-bottom dados that are free of splinters or chipping. Recommended for heavy duty machinery only. Packed in a wooden storage case. Set consists of 2 outside blades, 4-1/8” chippers,1 - 1/16” chipper.
Industrial Dado Sets - 2 Wing Chippers
Part# Dia. Thickness Bore
Additional Chippers - 2- Tooth Design
D840N - Negative Hook Outside Dado Blades. Outside blades areslightly thinner, producing dados that 1/64” undersize. Ideal formaking dados in plywood and composite panels. Also recommendedfor radial arm saws.
Additional Chippers - T-Series Dado
GRV12 8" 12T 10S T .165P .265K 5/8"GRV24 8" 24T N5S T .165P .265K 5/8"
GRV40 8" 40T 10S T .110P .156K 5/8"
Part# Dia. Tooth Grind Plate Kerf Bore
GrooversDesigned for making high numbers of grooves. The 24 tooth has ashear face and is designed for composite material. Quarter inchgroovers are slightly oversize to ensure groove is 1/4” even aftermany sharpenings.
Page 14
Stellit
e Tipp
ed Re
saw
Band
saw
Blade
s
Part# Dia. Thickness Bore
Saw StabilizersHelps stabilize blades which can result in better cuts and lower blade noise.Sold in pairs for optimum performance.
S T4 4" .102 5/8"
S T658 6" .102 5/8"
S T61 6" .102 1"
S T81 8" .102 1"
S T10131 101 3/4" 3" 3/4"3/4"
3/4"
Tipped Every Tooth R YOBI BS -360 NRS T11131 110 3/4" 3" Tipped Every Tooth HITAC HI C B 75F
S T11131A 110 3/4" 3" Tipped Alterante Tooth HITAC HI C B 75F
S T174114 174" 4" 1 1/4" Tipped Every Tooth HITAC HI C B 100F
Part# Length Width Tooth Spacing Machine Model
Stellite Tipped Resaw Bandsaw BladesThese blades exceed performance of OEM blades in edge life, cut quality, accuracy, and overall bladelife. New sizes are being added to our stock regularly, please call for availability.
Blades can be manufactured to your specification. Other sizes available from stock.
Part# Dia. Tooth Grind Plate Kerf Bore
Skarpaz C-Line BladesPremium blades for hand held saws. Benefit from economic sense of resharpening bladesrather that using throwaway type. Diamond knock out bushing where indicated.
BushingsKnurled outside diameter for a press fit.
Part# O.D. to I.D.
Part# Dia. Tooth Plate Kerf Bore
Biscuit Jointer BladesFits most popular makes of plate jointer machines. Chip limiting style..
BJ 100 100mm 6T 3.0P 4.0K 22mm
CL438T 4.3/8" 24T 5ATB .065 .104 20mm - 3/8" bus hingCL420T 4.3/8" 24T 5TC G .065 .104 20mm - 3/8" bus hingCL640A 6.1/2" 40T 15ATB .070 .110 5/8" diamond KOCL724A 7.1/4" 24T 15ATB .070 .100 5/8" diamond KO
CL740A 7.1/4" 40T 10ATB .070 .100 5/8" diamond KOCL760A 7.1/4" 60T 0ATB .070 .095 5/8" diamond KO
B1238 1/2" to 3/8"B5812 5/8" to 1/2"
B3458 3/4" to 5/8"
B120 1" to 20mm
B134 1" to 3/4"B158 1" to 5/8"
B3058 30mm to 5/8"
B301 30mm to 1"
B3020 30mm to 20mmB1141 1.1/4" to 1"
Skar
paz C
-Lin
e Bl
ades
Page 15
Part# Length Width Thickness
T1 High Speed Steel Knives
Part# Length Width Thickness
T1 Grade- Corrugated High Speed Steel Knives
Part# Length Width Thickness
Williams & Hussey Style Knives
For use on hardwood and MDF appications where long runs arerequired.
Knives are creep feed crush ground and salt bath heat treated. All knives are square back with 60 degree corrugations; 16 corrugations per inch. T1 grade high speed steel offers 10-20%longer run times than M2 knives. This is due to the increased tungsten content versus M2 which increases the knives’ ability to withstand abrasion. These knives are hardened to 63 RC and easily profiled wtih the same wheels used to grind M2 steel.
For use on hardwood and MDF appications where long runs arerequired.
M2 - High speed steel knives with hole pattern for Williams and Hussey moulders.
Sharpened and ready to cut down to set lengths for planer orjointers.
Carb
ide
Tipp
ed K
nive
sHi
gh S
peed
Ste
el K
nive
s
Part# Length Width Thickness Inlay Width
Carbide Tipped Knives - Smooth Back
TC658 6'' x 5/8'' x 1/8'' x 11mm inlay
TC834 8'' x 3/4'' x 1/8'' x 11mm inlayTC121 12'' x 1'' x 1/8'' x 11mm inlayTC151 15'' x 1'' x 1/8'' x 11mm inlay
TC201 20'' x 1'' x 1/8'' x 11mm inlayTC2430 24" x 30mm x 1/8" x 11mm inlayTC24114 24" x 1.1/4" x 5/32" x 11mm inlay
TC24115 24'' x 1.1/2'' x 5/32'' x 11mm inlayTC64035 640mm x 35mm x 3mm x 11mm inlay
CB 25112 25'' x 1.1/2'' x 5/16'' x 14mm inlay
CB 252 25'' x 2'' x 5/16'' x 25mm inlayCB 25134 25" x 1.3/4" x 5/16" x 25mm inlay
HS 5818 41.3/4" x 5/8'' x 1/8''
HS 3418 41.3/4'' x 3/4'' x 1/8''HS 118 41.3/4'' x 1'' x 1/8''HS 11418 41.3/4" x 1.1/4" x 1/8"
HS 114532 41.3/4" x 1.1/4" x 5/32"CR 114516 25" x 1-1/4" x 5/16"
CR 11214 25" x 1-1/2" x 1/4"CR 13414 25" x 1-3/4" x 1/4"CR 214 25" x 2" x 1/4"CR 112516 25" x 1-1/2" x 5/16"CR 134516 25" x 1-3/4" x 5/16"
CR 2516 25" x 2" x 5/16"CR 214516 25" x 2-1/4" x 5/16"
CR 212516 25" x 2-1/2" x 5/16"CR 234516 25" x 2-3/4" x 5/16"
CR 3516 25" x 3" x 5/16"
W H134316 25" x 1 3/4" x 3/16"W H2316 25" x 2" x 3/16"W H214 25" x 2" x 1/4"
W H21414 25" x 2 1/4" x 1/4"
W H21214 25" x 2 1/2" x 1/4"
Part# Length Width Thickness Inlay Width
Carbide Tipped Knives - Corrugated Back (16/60)
Page 16
TOOLING SYSTEMS INC.
Toll Free (800) 875-8030(415) 467-7900Fax (415) 467-6688Email [email protected] Version 8.8
The products contained in this catalog are High Quality Precision Tools. To maintain them in optimum condition and prolong their
working life the following precautions should be observed.
Make sure you have read and understand the machinery manufacturer’s directions of the machines being used. Only
operate machinery you are trained to operate.
ATTENTION
Never cut materials the tool was not designed to cut.
Never operate machinery without proper machine guards, hold downs, and safety devices in place.
Do not operate any machinery without appropriate eye, hand, and face protection. Keep body and clothing a safe distance from
the cutting tool.
Only use sharp cutting tools. The use of a dull tool will result in poor performance and is dangerous.
Do not exceed the maximum RPM as recommended by machinerymanufacturer.