Precision Mated Flats on BothExpander and Arbor Body
Precision Mated Flats on Collet
Safety StopsContractionExpansion
Tork-Lok Arbors and Collets
TORK-LOK ARBORS AND COLLETS
The Tork-Lok arbor design answers the need for a completely versatile workholding device. Precision ground flats on collets and arbors improve long-term accuracy and torque transmission. Standardization of components permits interchangeability and combination possibilities. Locates straight or tapered holes on true center.
INSTALLATION AND OPERATING INSTRUCTIONS
Safety StopsThe expansion safety stop is fixed in all styles and requires no adjustment. The contraction or loading position safety stop is adjusted to suit the part being chucked.
PreloadAll collets are manufactured to include a preload. Collets should not be adjusted below the range minimum for that collet. Preloads are .008 average on sizes from .500-.874 and .015 from .875-4.467.
Special Work Stop ConsiderationCombination Work Stop and Retaining Sleeve: Restrictor Type Work Stops are necessary for parts whose gripping length is shorter than the collet. Since the Tork-Lok collet expands at both ends, a retaining sleeve is needed to prevent the free end of the collet from over expanding; a Restrictor Expander is used to reduce the expansion safety stop, preventing collet breakage (in case arbor is operated without a part in position).
NOTES: • All Tork-Lok arbor applications require a part stop• If Restrictor Type Stop is used, a special Restrictor Expander is required• Contact us at 1-800-228-BUCK for more information DRAWBAR MODEL
Drawbar should be in forward or push position. Adjust forward expander with Allen wrench until part is a slip fit on the collet. Collet flats both ends must mate.
Collet ChangingDrawbar should be in forward positions. Using Allen wrench, remove forward expander. Collet and rubber sleeve can then be removed. Wash parts in clean solvent. Lightly grease expander flats in contact. Install forward expander. Adjust according to instructions outlined above.
AIR-OPERATED MODEL
Air pressure on the cylinder should be at 70 psi. Adjust forward expander with Allen wrench until part is slip fit on the collet. Collet flats on both ends must mate.
Collet ChangingWith air pressure at 70 psi, follow instructions listed in Drawbar Model.
To Interchange AssembliesApply 70 psi, remove mounting screws, turn arbor assembly counterclockwise until drawbar disengages from piston assembly.
To mount assembly, apply 70 psi. Be sure threads on drawbar are clean and oiled. Turn arbor assembly clockwise until face contacts cylinder. Back off to align tapped holes in cylinder. Insert screws and adjust according to instructions outlined above.
Expansion Stop
ForwardExpander
Dirt Seal
Contraction Stop
Drawbar Connector
ForwardExpander
Expansion Stop
Contraction Stop
Note: Max. Drawbar pullstamped here
Dirt Seal
Chip Clearance
Machine ID ofsleeve to highlimit of part+.02 - +.004
AIR-OPERATED MODEL
DRAWBAR MODEL
TYPICAL APPLICATIONS FOR ARBORS
PISTON
DIFF. CARRIER
TRACK ROTOR
BALL JOINT
GEAR BLANK
PUMP HOUSING
COMPRESSION PLATE
FRONT BRAKE DRUM
Special arbor combinations are available upon request. Please contact us at 1-800-228-BUCK for more information.
Arbor Applications
36
Tork-Lok Drawbar ModelsLong Series Arbors
FEATURES AND BENEFITS:• Answers your need for versatility• Precision-ground flats improve accuracy• Standardization permits interchangeability• Locates straight or tapered holes on true center• Requires a part stop
SHIPS COMPLETE WITH:• Flange body• Connector• Expander• Collet sold separately; see pages 40 & 41
Part # Range A B C D E F G H J-J1 K L M
AC 2110 .500-.65510 Collets 2.49 0.88 0.39 0.66 0.50 0.4702
0.4692 1.25 3.37553.3750
0.7500.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 B.C.For (4) 5/16 – 24
on 2.375 BCAC 2210 .593-.78012 Collets 2.69 1.06 0.41 0.66 0.50 0.5796
0.5786 1.25 3.37553.3750
0.7500.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 B.C.
AC 2310 .718-.99918 Collets 2.96 1.25 0.49 0.66 0.50 0.7046
0.7036 1.25 3.37553.3750
0.750 0.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 B.C.
AC 2410 .875-1.24912 Collets 3.58 1.44 0.56 0.90 0.56 0.8452
0.8442 1.75 4.12554.1250
1.2200.750 1/2 – 20 For (4) 1/2 S.H.S
on 3.12 B.C. For (4) 3/8 – 24on 2.875 BC
AC 2510 1.125-1.62416 Collets 3.89 1.62 0.69 0.90 0.56 1.0796
1.0786 1.75 4.12554.1250
1.2200.750 1/2 – 20 For (4) 1/2 S.H.S
on 3.12 B.C.
AC 2610 1.468-2.09220 Collets 4.14 1.81 0.82 0.72 0.68 1.4077
1.4067 2.50 4.87554.8750
1.5900.968 3/4 – 16 For (4) 1/2 S.H.S
on 3.75 B.C.
For (4) 3/8 – 24on 3.625 BC
AC 2710 1.937-2.84329 Collets 4.46 2.00 1.00 0.66 0.68 1.8452
1.8442 2.50 4.87554.8750
1.5900.968 3/4 – 16 For (4) 1/2 S.H.S
on 3.75 B.C.
AC 2810 2.563-3.59333 Collets 4.83 2.25 1.12 0.66 0.68 2.4390
2.4385 3.00 5.50055.5000
1.5900.968 3/4 – 16 For (4) 1/2 S.H.S
on 4.50 B.C.
AC 2910 3.312-4.46737 Collets 4.97 2.50 1.11 0.56 0.68 3.1885
3.1880 3.62 5.50055.5000
1.5900.068 3/4 – 16 For (4) 1/2 S.H.S
on 4.50 B.C.
LONG SERIES Measurements in inches unless otherwise indicated.
FEATURES AND BENEFITS:• Bolt circle has versatile three-bolt pattern• Tighter tolerance on size and parallelism for
locator mounting• Provisions for air sensing• Precision-ground flats improve accuracy• Standardization permits interchangeability• Locates straight or tapered holes on true center• Requires a part stop
Tork-Lok Metric Drawbar ModelsLong Series Arbors
Part # Q R
AC-2110M 15.00 M10 X 1.5P X 30.0 LG
AC-2210M 15.00 M10 X 1.5P X 30.0 LG
AC-2310M 15.00 M10 X 1.5P X 30.0 LG
AC-2410M 25.00 M12 X 1.75P X 50.0 LG
AC-2510M 25.00 M12 X 1.75P X 50.0 LG
AC-2610M 25.00 M16 X 2.0P X 50.0 LG
AC-2710M 25.00 M16 X 2.0P X 50.0 LG
AC-2810M 25.00 M16 X 2.0P X 50.0 LG
AC-2910M 25.00 M16 X 2.0P X 50.0 LG
Part # RANGE A B C D E F G H J-J1 K L M P
AC-2110M 12.70 - 16.64
10 Collets 63.30 22.40 9.92 10.30 19.08 11.91 31.74
85.74 85.73
18.26 14.27
M10 X 1.5P For (3)
M10 X 1.5P SHCS ON 63.50 BC
For (3) M8 X 1.25P SHCS ON 60.33 BC
12.68
AC-2210M 15.06 -19.81
12 Collets 68.40 26.90 10.52 10.30 19.08 15.47 31.74
85.74 85.73
18.26 14.27
M10X1.5P 12.68
AC-2310M 18.24 - 25.38
18 Collets 75.30 31.80 12.42 10.30 19.08 18.26 31.74
85.74 85.73
18.26 14.27
M10 X 1.5P 12.68
AC-2410M 22.23 - 31.73
12 Collets 91.00 36.60 14.27 15.10 22.23 21.44 44.44
104.79 104.78
30.99 19.05
M12 X 1.75P For (3)
M12 X 1.75P SHCS ON 79.38 BC
For (3) M10 X 1.5P SHCS ON 73.03 BC
15.83
AC-2510M 28.58 - 41.25
16 Collets 98.70 41.10 17.47 15.10 22.23 27.79 44.44
104.79 104.78
30.99 19.05
M12 X 1.75P 15.83
AC-2610M 37.29 - 53.14
20 Collets 105.20 46.00 20.67 13.50 22.23 36.12 63.49
123.84 123.83
40.39 24.59
M16 X 2.0P 15.83
AC-2710M 49.20 - 72.21
29 Collets 113.20 50.80 25.47 11.90 22.23 47.22 63.49
123.84 123.83
40.39 24.59
M16 X 2.0P For (3)
M12 X 1.75P SHCS ON 95.25 BC
For (3) M10 X 1.5P SHCS ON 92.08 BC
15.83
AC-2810M 65.100 - 91.26
33 Collets 122.60 57.20 28.47 11.90 22.23 62.31 76.19
139.71 139.70
40.39 24.59
M16 X 2.0P 15.83
AC-2910M 84.13 - 113.46
37 Collets 126.30 63.50 27.87 9.50 22.23 80.98 92.06
139.71 139.70
40.39 24.59
M16 X 2.0P 15.83
LONG SERIES Dimensions denoted in millimeters unless otherwise specified.
SHIPS COMPLETE WITH:• Flange body• Connector• Expander• Collet sold separately; see
pages 40 & 41
- Optional assembly method with male thread
38
SHIPS COMPLETE WITH:• Flange body• Connector• Expander• Collet sold separately; see pages 40 & 41
FEATURES AND BENEFITS:• Answers your need for versatility• Precision-ground flats improve accuracy• Standardization permits interchangeability• Locates straight or tapered holes on true center• Requires a part stop
Tork-Lok Drawbar ModelsShort Series Arbors
Part # Range A B C D E F G H J-J1 K L M
AC 8100 .500-.65515 Collets 1.81 0.590 0.42 0.25 0.50 0.4702
0.4692 0.88 3.37553.3750
0.7810.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 BCFor (4) 5/16 – 24
on 2.375 BCAC 8200 .593-.78720 Collets 1.97 0.720 0.45 0.25 0.50 0.5796
0.5786 1.00 3.37553.3750
0.7810.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 B.C.
AC 8300 .718-1.00028 Collets 2.15 0.840 0.51 0.25 0.50 0.7046
0.7036 1.12 3.37553.3750
0.7810.562 3/8 – 24 For (4) 3/8 S.H.S
on 2.50 B.C.
AC 8400 .875-1.29920 Collets 2.35 0.940 0.59 0.18 0.56 0.8452
0.8442 1.38 4.12554.1250
1.2500.750 1/2 – 20 For (4) 1/2 S.H.S
on 3.12 B.C. For (4) 3/8 – 24on 2.875 BC
AC 8500 1.125-1.62424 Collets 2.59 1.125 0.65 0.18 0.56 1.0796
1.0786 1.56 4.12554.1250
1.2500.750 1/2 – 20 For (4) 1/2 S.H.S
on 3.12 B.C.
AC 8600 1.468-2.10430 Collets 2.93 1.220 0.83 0.12 0.68 1.4077
1.4067 1.88 4.87554.8750
1.6250.968 3/4 – 16 For (4) 1/2 S.H.S
on 3.75 B.C. For (4) 3/8 – 24on 3.625 BC
AC 8700 1.937-2.82142 Collets 2.98 1.310 0.79 0.12 0.68 1.8452
1.8442 2.38 4.87554.8750
1.6250.968 3/4 – 16 For (4) 1/2 S.H.S
on 3.75 B.C.
SHORT SERIES Measurements in inches unless otherwise indicated.
www.BuckChuckUSA.com1-800-228-BUCK 39
Tork-Lok Metric Drawbar ModelsShort Series Arbors
Part # Q R
AC-8100M 15.00 M10 X 1.5P X 30.0 LG
AC-8200M 15.00 M10 X 1.5P X 40.0 LG
AC-8300M 15.00 M10 X 1.5P X 30.0 LG
AC-8400M 21.00 M12 X 1.75P X 40.0 LG
AC-8500M 21.00 M12 X 1.75P X 40.0 LG
AC-8600M 25.00 M16 X 2.0P X 50.0 LG
AC-8700M 25.00 M16 X 2.0P X 50.0 LG
Part # RANGE A B C E F H J-J1 K L M P
AC-8100M 12.70 - 16.64
15 Collets 46.00 15.00 10.72 19.08
11.94
11.92
85.74
85.73
19.84
14.27 M10 X 1.5P
For (3)
M10 X 1.5P
SHCS ON
63.50 BC
For (3)
M8 X 1.25P
SHCS ON
60.33 BC
13.04
AC-8200M 15.06 - 20.24
20 Collets 50.10 18.30 11.42 19.08
14.72
14.71
85.74
85.73
19.84
14.27 M10X1.5P 13.04
AC-8300M 18.24 - 25.40
28 Collets 54.50 21.30 12.92 19.08
17.89
17.88
85.74
85.73
19.84
14.27 M10 X 1.5P 13.04
AC-8400M 22.23 - 33.00
20 Collets 59.60 23.90 15.02 19.08
21.46
21.45
104.79
104.78
31.80
19.05 M12 X 1.75P
For (3)
M12 X 1.75P
SHCS ON
79.38 BC
For (3)
M10 X 1.5P
SHCS ON
73.03 BC
13.04
AC-8500M 28.58 - 41.71
24 Collets 65.70 28.60 16.42 19.08
27.42
27.41
104.79
104.78
31.75
19.05 M12 X 1.75P 13.04
AC-8600M 37.29 - 53.44
30 Collets 74.30 31.00 22.62 19.08
35.75
35.74
123.84
123.83
41.28
24.59 M16 X 2.0P
For (3)
M12 X 1.75P
SHCS ON
95.25 BC
For (3)
M10 X 1.5P
SHCS ON
92.08 BC
13.04
AC-8700M 649.20 - 71.65
42 Collets 75.50 33.30 21.52 19.08
46.86
46.85
123.84
123.83
41.28
24.59 M16 X 2.0P 13.04
SHORT SERIES
FEATURES AND BENEFITS:• Bolt circle has versatile three-bolt pattern• Tighter tolerance on size and parallelism for
locator mounting• Provisions for air sensing• Precision-ground flats improve accuracy• Standardization permits interchangeability• Locates straight or tapered holes on true center• Requires a part stop
SHIPS COMPLETE WITH:• Flange body• Connector• Expander• Collet sold separately; see
pages 40 & 41
- Optional assembly method with male thread
Dimensions denoted in millimeters unless otherwise specified.
Tork
-Lok
Lon
g Se
ries
Col
lets
FEAT
URES
AND
BEN
EFIT
S:•
Prec
isio
n gr
ound
flat
s•
Colle
ts in
terc
hang
eabl
e on
all
arbo
rs w
ithin
spe
cifie
d ra
nge
•Ac
cura
cy o
f arb
or n
ot a
ffect
ed
by in
dexi
ng o
f col
let s
haft
•Hi
gh-g
rade
ste
els,
pre
cise
ly
heat
trea
ted
•Si
licon
e se
alin
g of
col
let s
lots
fo
r spe
cial
jobs
is a
vaila
ble
on
requ
est f
or a
dditi
onal
cha
rge
•Co
llets
in o
vers
ize
(ove
rlap)
ra
nges
are
ava
ilabl
e –
see
bold
rang
es
For u
se o
n AC
1100
211
0M,
2110
, 511
0Fo
r use
on
AC14
00, 2
410M
, 241
0, 5
410
For u
se o
n AC
1700
, 271
0M, 2
710,
571
0Fo
r use
on
AC18
00, 2
810M
, 281
0Co
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thCo
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
th
AC10
112
.70-
13.0
8.5
00-.
515
.88
in22
.35m
m
AC40
122
.23-
22.9
9.8
75-.
905
1.44
in36
.57
mm
AC70
149
.20-
49.9
61.
937-
1.96
7
2.00
in50
.80
mm
AC82
281
.76-
82.5
33.
219-
3.24
9
2.25
in57
.15
mm
AC10
213
.11-
13.4
6.5
16-.
530
AC40
223
.01-
23.7
7.9
06-.
936
AC70
249
.99-
50.7
81.
968-
1.99
9AC
823
82.5
5-83
.31
3.25
0-3.
280
AC10
313
.49-
13.8
7.5
31-.
546
AC40
323
.80-
24.5
6.9
37-.
967
AC70
350
.80-
51.5
62.
000-
2.03
0AC
824
83.3
4-84
.10
3.28
1-3.
311
AC10
413
.89-
14.2
5.5
47-.
561
AC40
424
.59-
25.3
8.9
68-.
999
AC70
451
.59-
52.3
52.
031-
2.06
1AC
825
84.1
3-84
.91
3.31
2-3.
343
AC10
514
.28-
14.6
6.5
62-.
577
AC40
525
.40-
26.1
61.
000-
1.03
0AC
705
52.3
8-53
.14
2.06
2-2.
092
AC82
684
.94-
85.7
03.
344-
3.37
4AC
106
14.6
8-15
.03
.578
-.59
2AC
406
26.1
9-26
.95
1.03
1-1.
061
AC70
653
.16-
53.9
52.
093-
2.12
4AC
827
85.7
3-86
.49
3.37
5-3.
405
AC10
715
.06-
15.4
4.5
93-.
608
AC40
726
.98-
27.7
31.
062-
1.09
2AC
707
53.9
8-54
.74
2.12
5-2.
155
AC82
886
.51-
87.2
73.
406-
3.43
6AC
108
15.4
7-15
.82
.609
-.62
3AC
408
27.7
6-28
.55
1.09
3-1.
124
AC70
854
.76-
55.5
22.
156-
2.18
6AC
829
87.3
0-88
.09
3.43
7-3.
468
AC10
915
.85-
16.2
3.6
24-.
639
AC40
928
.57-
29.3
41.
125-
1.15
5AC
709
55.5
5-56
.31
2.18
7-2.
217
AC83
088
.11-
88.8
83.
469-
3.49
9AC
110
16.2
6-16
.64
.640
-.65
5AC
410
29.3
6-30
.12
1.15
6-1.
186
AC71
056
.34-
57.1
32.
218-
2.24
9AC
831
88.9
0-89
.66
3.50
0-3.
530
For u
se o
n AC
1200
, 221
0M, 2
210,
521
0AC
411
30.1
5-30
.91
1.18
7-1.
217
AC71
157
.15-
57.9
12.
250-
2.28
0AC
832
89.6
9-90
.45
3.53
1-3.
561
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
412
30.9
4-31
.73
1.21
8-1.
249
AC71
257
.94-
58.7
02.
281-
2.31
1AC
833
90.4
8-91
.26
3.56
2-3.
593
AC20
115
.06-
15.4
4.5
93-.
608
1.06
in26
.92
mm
For u
se o
n AC
1500
, 251
0M, 2
510,
551
0AC
713
58.7
3-59
.49
2.31
2-2.
342
For u
se o
n AC
1900
, 291
0M, 2
910
AC20
215
.47-
15.8
5.6
09-.
624
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
714
59.5
1-60
.30
2.34
3-2.
374
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
th
AC20
315
.88-
16.2
3.6
25-.
639
AC50
128
.58-
29.3
41.
125-
1.15
5
1.62
in41
.14
mm
AC71
560
.33-
61.0
92.
375-
2.40
5AC
901
84.1
3-84
.91
3.31
2-3.
343
2.50
in63
.50
mm
AC20
416
.26-
16.6
4.6
40-.
655
AC50
229
.36-
30.1
21.
156-
1.18
6AC
716
61.1
1-61
.87
2.40
6-2.
436
AC90
284
.94-
85.7
03.
344-
3.37
4
AC20
516
.66-
17.0
2.6
56-.
670
AC50
330
.15-
30.9
11.
187-
1.21
7AC
717
61.9
0-62
.66
2.43
7-2.
467
AC90
385
.73-
86.4
93.
375-
3.40
5
AC20
617
.04-
17.4
2.6
71-.
686
AC50
430
.94-
31.7
31.
218-
1.24
9AC
718
62.6
9-63
.48
2.46
8-2.
499
AC90
486
.51-
87.2
73.
406-
3.43
6
AC20
717
.45-
17.8
3.6
87-.
702
AC50
531
.75-
32.5
11.
250-
1.28
0AC
719
63.5
0-64
.26
2.50
0-2.
530
AC90
587
.30-
88.0
93.
437-
3.46
8
AC20
817
.85-
18.2
1.7
03-.
717
AC50
632
.54-
33.3
01.
281-
1.31
1AC
720
64.2
9-6.
082.
531-
2.56
2AC
906
88.1
1-88
.88
3.46
9-3.
499
AC20
918
.24-
19.6
2.7
18-.
733
AC50
733
.33-
34.0
91.
312-
1.34
2AC
721
65.1
0-65
.86
2.56
3-2.
593
AC90
788
.90-
89.6
63.
500-
3.53
0
AC21
018
.64-
19.0
3.7
34-.
749
AC50
834
.11-
34.9
01.
343-
1.37
4AC
722
65.8
9-66
.65
2.59
4-2.
624
AC90
889
.69-
90.4
53.
531-
3.56
1
AC21
119
.05-
19.4
1.7
50-.
764
AC50
934
.93-
35.6
91.
375-
1.40
5AC
723
66.6
8-67
.44
2.62
5-2.
655
AC90
990
.48-
91.2
63.
562-
3.59
3
AC21
219
.43-
19.8
1.7
65-.
780
AC51
035
.71-
36.4
71.
406-
1.43
6AC
724
67.4
6-68
.22
2.65
6-2.
686
AC91
091
.29-
92.0
53.
594-
3.62
4
For u
se o
n AC
1300
, 231
0M, 2
310,
531
0AC
511
36.5
0-37
.26
1.43
7-1.
467
AC72
568
.25-
69.0
42.
687-
2.71
8AC
911
92.0
8-92
.84
3.62
5-3.
655
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
512
37.2
9-38
.08
1.46
8-1.
499
AC72
669
.06-
69.8
32.
719-
2.74
9AC
912
92.8
6-93
.62
3.65
6-3.
686
AC30
118
.24-
18.6
2.7
18-.
733
1.25
in31
.75
mm
AC51
338
.10-
38.8
61.
500-
1.53
0AC
727
69.8
5-70
.61
2.75
0-2.
780
AC91
393
.65-
94.4
43.
687-
3.71
8
AC30
218
.64-
19.0
3.7
34-.
749
AC51
438
.89-
39.6
51.
531-
1.56
1AC
728
70.6
4-71
.40
2.78
1-2.
811
AC91
494
.46-
95.2
33.
719-
3.74
9
AC30
319
.05-
19.4
1.7
50-.
764
AC51
539
.68-
40.4
41.
562-
1.59
2AC
729
71.4
3-72
.21
2.81
2-2.
843
AC91
595
.25-
96.0
13.
750-
3.78
0
AC30
419
.43-
19.8
1.7
65-.
780
AC51
540
.46-
41.2
51.
593-
1.62
4Fo
r use
on
AC18
00, 2
810M
, 281
0AC
916
96.0
4-96
.80
3.78
1-3.
811
AC30
520
.24-
20.2
2.7
81-.
796
For u
se o
n AC
1600
, 261
0M, 2
610,
561
0Co
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
AC91
796
.83-
97.6
13.
812-
3.84
3
AC30
620
.24-
20.6
3.7
97-.
812
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
801
65.0
8-65
.86
2.56
2-2.
593
2.25
in57
.15
mm
AC91
897
.64-
98.4
03.
844-
3.87
4
AC30
720
.65-
21.0
1.8
13-.
827
AC60
137
.29-
38.0
81.
468-
1.49
9
1.82
in46
.22
mm
AC80
265
.89-
66.6
52.
594-
2.62
4AC
919
98.4
3-99
.19
3.87
5-3.
905
AC30
821
.03-
21.4
1.8
28-.
843
AC60
238
.10-
38.8
61.
500-
1.53
0AC
803
66.6
8-67
.44
2.62
5-2.
655
AC92
099
.21-
99.9
73.
906-
3.93
6
AC30
921
.44-
21.7
9.8
44-.
858
AC60
338
.89-
39.6
51.
531-
1.56
1AC
804
67.4
6-68
.22
2.56
5-2.
686
AC92
110
0.00
-100
.79
3.93
7-3.
968
AC31
021
.82-
22.2
0.8
59-.
874
AC60
439
.68-
40.4
41.
562-
1.59
2AC
805
68.2
5-69
.04
2.68
7-2.
718
AC92
210
0.81
-101
.58
3.96
9-3.
999
AC31
122
.23-
22.6
1.8
75-.
890
AC60
540
.46-
41.2
51.
593-
1.62
4AC
806
69.0
6-29
.83
2.71
9-2.
749
AC92
310
1.60
-102
.36
4.00
0-4.
030
AC31
222
.63-
22.9
9.8
91-.
905
AC60
641
.28-
42.0
41.
625-
1.65
5AC
807
69.8
5-70
.61
2.75
0-2.
780
AC92
410
2.39
-103
.15
4.03
1-4.
061
AC31
323
.01-
23.3
9.9
06-.
921
AC60
742
.06-
42.8
21.
656-
1.68
6AC
808
70.6
3-71
.40
2.78
1-2.
811
AC92
510
3.18
-103
.96
4.06
2-4.
093
AC31
423
.41-
23.7
7.9
22-.
936
AC60
842
.85-
43.6
11.
687-
1.71
7AC
809
71.4
3-72
.21
2.81
2-2.
843
AC92
610
3.99
-104
.75
4.09
4-4.
124
AC31
523
.80-
24.1
8.9
37-.
952
AC60
943
.64-
44.4
31.
718-
1.74
9AC
810
72.2
4-73
.00
2.84
4-2.
874
AC92
710
4.78
-105
.54
4.12
5-4.
155
AC31
624
.21-
24.5
6.9
53-.
967
AC61
044
.45-
45.2
11.
750-
1.78
0AC
811
73.0
3-73
.79
2.87
5-2.
905
AC92
810
5.56
-106
.32
4.15
6-4.
186
AC31
724
.59-
24.9
7.9
68-.
983
AC61
145
.24-
46.0
01.
781-
1.81
1AC
812
73.8
1-74
.57
2.90
6-2.
936
AC92
910
6.35
-107
.11
4.18
7-4.
217
AC31
825
.00-
25.3
8.9
84-.
999
AC61
246
.03-
46.7
81.
812-
1.84
2AC
813
74.6
0-75
.39
2.93
7-2.
968
AC93
010
7.14
-107
.93
4.21
8-4.
249
AC61
346
.79-
47.6
01.
843-
1.87
4AC
814
75.4
1-76
.18
2.96
9-2.
999
AC93
110
7.95
-108
.71
4.25
0-4.
280
AC61
447
.63-
48.3
91.
875-
1.90
5AC
815
76.2
0-76
.96
3.00
0-3.
030
AC93
210
8.74
-109
.50
4.28
1-4.
311
AC61
548
.41-
49.1
71.
906-
1.93
6AC
816
76.9
9-77
.75
3.03
1-3.
061
AC93
310
9.53
-110
.29
4.31
2-4.
342
AC61
649
.20-
49.9
61.
937-
1.96
7AC
817
77.7
8-78
.56
3.06
2-3.
093
AC93
411
0.31
-111
.10
4.34
3-4.
374
AC61
749
.98-
50.7
71.
968-
1.99
9AC
818
78.5
9-79
.35
3.09
4-3.
124
AC93
511
1.13
-111
.89
4.37
5-4.
405
AC61
850
.80-
51.5
62.
000-
2.03
0AC
819
79.3
8-80
.14
3.12
5-3.
155
AC93
611
1.91
-112
.67
4.40
6-4.
436
AC61
951
.59-
52.3
52.
031-
2.06
1AC
820
80.1
6-80
.92
3.15
6-3.
186
AC93
711
2.70
-113
.46
4.43
7-4.
467
AC62
052
.38-
53.1
42.
062-
2.09
2AC
821
80.9
5-81
.74
3.18
7-3.
218
Over
size
col
lets
AC1
07-1
10;
209-
212
and
311-
318
shou
ldbe
use
d on
ly in
ligh
t tur
ning
or g
rindi
ng o
pera
tions
.
Tork
-Lok
Sho
rt
Seri
es C
olle
ts
FEAT
URES
AND
BEN
EFIT
S:•
Prec
isio
n gr
ound
flat
s•
Colle
ts in
terc
hang
eabl
e on
all
arbo
rs w
ithin
spe
cifie
d ra
nge
•Ac
cura
cy o
f arb
or n
ot a
ffect
ed
by in
dexi
ng o
f col
let s
haft
•Hi
gh-g
rade
ste
els,
pre
cise
ly
heat
trea
ted
•Si
licon
e se
alin
g of
col
let s
lots
fo
r spe
cial
jobs
is a
vaila
ble
on
requ
est f
or a
dditi
onal
cha
rge
•Co
llets
in o
vers
ize
(ove
rlap)
ra
nges
are
ava
ilabl
e –
see
bold
rang
es
For u
se o
n AC
7100
A, 8
100M
, 810
0, 1
2100
For u
se o
n AC
7300
A, 8
300,
830
0M, 1
2300
For u
se o
n AC
7500
A, 8
500,
850
0M, 1
2500
For u
se o
n AC
7600
A, 8
600,
860
0M, 1
2600
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thCo
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thCo
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
AC71
0112
.70-
12.9
5.5
00-.
510
.59
in14
.986
mm
AC73
1221
.03-
21.2
6.8
28-.
837
.84
in21
.34
mm
AC75
0128
.58-
29.1
11.
125-
1.14
6
1.12
5 in
28.5
8 m
m
AC76
2349
.20-
49.7
11.
937-
1.95
7
1.22
in30
.99
mm
AC71
0212
.98-
13.2
1.5
11-.
520
AC73
1321
.29-
21.5
1.8
38-.
847
AC75
0229
.13-
29.6
71.
147-
1.16
8AC
7624
49.7
3-50
.24
1.95
8-1.
978
AC71
0313
.23-
13.4
8.5
21-.
531
AC73
1421
.54-
21.7
4.8
48-.
856
AC75
0329
.69-
30.2
31.
169-
1.19
0AC
7625
50.2
7-50
.78
1.97
9-1.
999
AC71
0413
.51-
13.7
4.5
32-.
541
AC73
1521
.77-
22.0
0.8
57-.
866
AC75
0430
.25-
30.7
91.
191-
1.21
2AC
7626
50.8
0-51
.31
2.00
0-2.
020
AC71
0513
.77-
14.0
2.5
42-.
552
AC73
1622
.02-
22.1
2.8
67-.
874
AC75
0530
.81-
31.3
41.
213-
1.23
4AC
7627
51.3
3-51
.84
2.02
1-2.
041
AC71
0614
.05-
14.2
8.5
53-.
562
AC73
1722
.23-
22.2
5.8
75-.
884
AC75
0631
.37-
31.9
01.
235-
1.25
6AC
7628
51.8
7-52
.38
2.04
2-2.
062
AC71
0714
.30-
14.2
6.5
63-.
572
AC73
1822
.48-
22.7
3.8
85-.
895
AC75
0731
.93-
32.4
61.
257-
1.27
8AC
7629
52.4
0-52
.91
2.06
3-2.
083
AC71
0814
.55-
14.7
8.5
73-.
582
AC73
1922
.76-
22.9
9.8
96-.
905
AC75
0832
.49-
33.0
01.
279-
1.29
9AC
7630
52.9
3-53
.44
2.08
4-2.
104
AC71
0914
.81-
15.0
4.5
83-.
592
AC73
2023
.01-
23.2
7.9
06-.
916
AC75
0933
.02-
33.5
31.
300-
1.32
0Fo
r use
on
AC77
0A, 8
700,
870
0M, 1
2700
AC71
1015
.06-
15.3
2.5
93-.
603
AC73
2123
.29-
23.5
2.9
17-.
926
AC75
1033
.55-
34.0
61.
321-
1.34
1Co
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
AC71
1115
.34-
15.5
7.6
04-.
613
AC73
2223
.55-
23.8
0.9
27-.
937
AC75
1134
.09-
34.6
01.
342-
1.36
2AC
7701
49.2
0-49
.71
1.93
7-1.
957
1.31
in33
.27
mm
AC71
1215
.60-
15.8
5.6
14-.
624
AC73
2323
.83-
24.0
5.9
38-.
947
AC75
1234
.62-
35.1
31.
363-
1.38
3AC
7702
49.7
3350
.24
1.95
8-1.
978
AC71
1315
.88-
16.1
0.6
25-.
634
AC73
2424
.08-
24.3
3.9
48-.
958
AC75
1335
.15-
35.6
61.
384-
1.40
4AC
7703
50.2
7-50
.77
1.97
9-1.
999
AC71
1416
.13-
16.3
8.6
35-.
645
AC73
2524
.36-
24.5
9.9
59-.
968
AC75
1435
.69-
36.2
01.
405-
1.42
5AC
7704
50.8
0-51
.31
2.00
0-2.
020
AC71
1516
.41-
16.6
4.6
46-.
655
AC73
2624
.61-
24.8
7.9
69-.
979
AC75
1536
.22-
36.7
31.
426-
1.44
6AC
7705
51.3
3-51
.84
2.02
1-2.
041
For u
se o
n AC
7200
A, 8
200M
, 820
0, 1
2200
AC73
2724
.89-
25.1
2.9
80-.
989
AC75
1636
.75-
37.2
61.
447-
1.46
7AC
7706
51.8
7-52
.38
2.04
2-2.
062
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
7328
25.1
5-25
.40
.990
-1.0
00AC
7517
37.2
9-37
.82
1.46
8-1.
489
AC77
0752
.40-
52.9
12.
063-
2.08
3
AC72
0115
.06-
15.3
1.5
93-.
603
.72
in18
.29
mm
For u
se o
n AC
7400
A, 8
400,
840
0M, 1
2400
AC75
1837
.85-
38.3
81.
490-
1.51
1AC
7708
52.9
3-53
.44
2.08
4-2.
104
AC72
0215
.34-
15.5
7.6
04-.
613
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
7519
38.4
1-38
.94
1.51
2-1.
533
AC77
0953
.47-
53.9
82.
105-
2.12
5
AC72
0315
.60-
15.8
5.6
14-.
624
AC74
0122
.26-
22.5
9.8
75-.
895
.94
in23
.88
mm
AC75
2038
.96-
39.5
01.
534-
1.55
5AC
7710
54.0
0-54
.51
2.12
6-2.
146
AC72
0415
.88-
16.1
0.6
25-.
634
AC74
0222
.76-
23.2
7.8
96-.
916
AC75
2139
.52-
40.0
61.
556-
1.57
7AC
7711
54.5
3-55
.04
2.14
7-2.
167
AC72
0516
.13-
16.3
8.6
35-.
645
AC74
0323
.29-
23.8
0.9
17-.
937
AC75
2240
.08-
40.6
21.
578-
1.59
9AC
7712
55.0
7-55
.58
2.16
8-2.
188
AC72
0616
.41-
16.6
4.6
46-.
655
AC74
0423
.83-
24.3
3.9
38-.
958
AC75
2340
.64-
117.
371.
600-
1.62
1AC
7713
55.6
0-56
.11
2.18
9-2.
209
AC72
0716
.66-
16.9
2.6
56-.
666
AC74
0524
.36-
24.8
7.9
59-.
979
AC75
2441
.20-
41.7
11.
622-
1.64
2AC
7714
56.1
3-56
.64
2.21
0-2.
230
AC72
0816
.94-
17.1
7.6
67-.
676
AC74
0624
.89-
25.4
0.9
80-1
.000
For u
se o
n AC
7600
A, 8
600,
860
0M, 1
2600
AC77
1556
.67-
57.1
82.
231-
2.25
1
AC72
0917
.20-
17.4
5.6
77-.
687
AC74
0725
.43-
25.9
31.
001-
1.02
1Co
llet #
Rang
e (m
m)
Rang
e (in
)Le
ngth
AC77
1657
.20-
57.7
12.
252-
2.27
2
AC72
1017
.48-
17.7
0.6
88-.
697
AC74
0825
.96-
26.4
71.
022-
1.04
2AC
7601
37.2
9-37
.82
1.46
8-1.
489
1.22
in30
.99
mm
AC77
1757
.73-
58.2
42.
273-
2.29
3
AC72
1117
.73-
17.9
6.6
98-.
707
AC74
0926
.49-
27.0
01.
043-
1.06
3AC
7602
37.8
5-38
.38
1.49
0-1.
511
AC77
1858
.27-
58.7
82.
294-
2.31
4
AC72
1217
.98-
18.2
1.7
08-.
717
AC74
1027
.02-
27.5
31.
064-
1.08
4AC
7603
38.4
1-38
.94
1.51
2-1.
533
AC77
1958
.80-
59.3
12.
315-
2.33
5
AC72
1318
.24-
18.4
7.7
18-.
727
AC74
1127
.56-
28.0
41.
105-
1.12
4AC
7604
38.9
6-39
.50
1.53
4-1.
555
AC77
2059
.33-
59.8
42.
336-
2.35
6
AC72
1418
.49-
18.7
2.7
28-.
737
AC74
1328
.58-
29.1
11.
125-
1.14
6AC
7605
39.5
2-40
.06
1.55
6-1.
577
AC77
2159
.81-
60.3
82.
357-
2.37
7
AC72
1518
.75-
18.9
7.7
38-.
747
AC74
1429
.13-
29.6
71.
147-
1.16
8AC
7606
40.0
8-40
.61
1.57
8-1.
599
AC77
2260
.40-
60.9
12.
378-
2.39
8
AC72
1619
.00-
19.2
3.7
48-.
757
AC74
1529
.69-
30.2
71.
169-
1.19
0AC
7607
40.6
4-41
.17
1.60
0-1.
621
AC77
2360
.94-
61.4
42.
399-
2.41
9
AC72
1719
.25-
19.4
8.7
58-.
767
AC74
1630
.25-
30.7
91.
191-
1.21
2AC
7608
41.2
0-41
.71
1.62
2-1.
642
AC77
2461
.47-
61.9
72.
420-
2.44
0
AC72
1819
.51-
19.7
4.7
68-.
777
AC74
1730
.81-
31.3
41.
213-
1.23
4AC
7609
41.7
3-42
.24
1.64
3-1.
663
AC77
2562
.00-
62.5
12.
441-
2.46
1
AC72
1919
.76-
19.9
9.7
78-.
787
AC74
1831
.37-
31.9
01.
235-
1.25
6AC
7610
42.2
7-42
.77
1.66
4-1.
684
AC77
2662
.54-
63.0
22.
462-
2.48
1
AC72
2020
.06-
20.2
4.7
88-.
797
AC74
1931
.93-
32.4
61.
257-
1.27
8AC
7611
42.8
0-43
.31
1.68
5-1.
705
AC77
2763
.04-
63.5
32.
482-
2.50
1
For u
se o
n AC
7300
A, 8
300,
830
0M, 1
2300
AC74
2032
.49-
33.0
01.
279-
1.29
9AC
7612
43.3
3-43
.84
1.70
6-1.
726
AC77
2863
.55-
64.0
32.
502-
2.52
1
Colle
t #Ra
nge
(mm
)Ra
nge
(in)
Leng
thAC
7613
43.8
7-44
.37
1.72
7-1.
747
AC77
2964
.06-
64.5
42.
522-
2.54
1
AC73
0118
.24-
18.4
7.7
18-.
727
.84
in21
.34
mm
AC76
1444
.40-
44.9
11.
748-
1.76
8AC
7730
64.5
7-65
.05
2.54
2-2.
561
AC73
0218
.49-
18.7
2.7
28-.
737
AC76
1544
.93-
45.4
41.
769-
1.78
9AC
7731
65.0
8-65
.61
2.56
2-2.
583
AC73
0318
.75-
18.9
7.7
38-.
747
AC76
1645
.47-
45.9
71.
790-
1.81
0AC
7732
65.6
3-66
.14
2.58
4-2.
604
AC73
0419
.00-
19.2
3.7
48-.
757
AC76
1746
.00-
46.5
11.
811-
1.83
1AC
7733
66.1
7-66
.68
2.60
5-2.
625
AC73
0519
.25-
19.4
8.7
58-.
767
AC76
1846
.53-
47.0
41.
832-
1.85
2AC
7734
66.7
0-67
.21
2.62
6-2.
646
AC73
0619
.51-
19.7
4.7
68-.
777
AC76
1947
.07-
47.5
71.
853-
1.87
3AC
7735
67.2
3-67
.74
2.64
7-2.
667
AC73
0719
.76-
19.9
9.7
78-.
787
AC76
2047
.60-
48.1
11.
874-
1.89
4AC
7736
67.7
7-68
.30
2.66
8-2.
689
AC73
0820
.02-
20.2
4.7
88-.
797
AC76
2148
.13-
48.6
41.
895-
1.91
5AC
7737
68.3
3-68
.86
2.69
0-2.
711
AC73
0920
.27-
20.5
0.7
98-.
807
AC76
2248
.67-
49.1
71.
916-
1.93
6AC
7738
68.8
9-69
.42
2.71
2-2.
733
AC73
1020
.52-
20.7
5.8
08-.
817
AC77
3969
.44-
69.9
82.
734-
2.75
5AC
7311
20.7
8-21
.01
.818
-.82
7AC
7740
70.0
0-70
.54
2.75
6-2.
777
AC77
4170
.56-
71.1
02.
778-
2.79
9
AC77
4271
.12-
71.6
52.
800-
2.82
1
Over
size
col
lets
AC7
110-
7115
; 72
13-7
220
and
7317
-732
8 sh
ould
be
used
onl
y in
ligh
t tu
rnin
g or
grin
ding
ope
ratio
ns.
41
42
Tork-Lok Replacement ComponentsSold in Kits
EXPANDER
RETAINING RING
DIRT SEAL
CONNECTOR
LOCK PIN
FLANGE SHAFT(sold separately)
REPLACEMENT COMPONENTS
Assembly # Replacement # Flange Shaft #(sold separately)
AC 2110 AC 2110K AC 159
AC 2210 AC 2210K AC 259AC 2310 AC 2310K AC 359AC 2410 AC 2410K AC 459AC 2510 AC 2510K AC 559
AC 2610 AC 2610K AC 659
AC 2710 AC 2710K AC 759
AC 2810 AC 2810K AC 859
AC 2910 AC 2910K AC 959
AC 8100 AC 8100K AC 8152
AC 8200 AC 8200K AC 8252
AC 8300 AC 8300K AC 8352
AC 8400 AC 8400K AC 8452
AC 8500 AC 8500K AC 8552
AC 8600 AC 8600K AC 8652
AC 8700 AC 8700K AC 8752
AIR OPERATED MODELS
Cylinder Assembly # A B C Connector Part # For Use With
AC-3007 8.18 2.91 6.8856.875
AC-135 AC 2110, 2210, 2310, 8100, 8300
AC-136 AC 2410, 2510, 8400, 8500
AC-3010 11.18 3.03 9.8859.875
AC-137 2110, 2210, 2310, 8100, 8200, 8300
AC-138 2410, 2510, 8400, 8500
AC-139 2610, 2710, 8600, 8700
AC-3013 14.18 3.09 12.88512.875
AC-138 2410, 2510, 8400, 8500
AC-139 2610, 2710, 2810, 2910, 8600, 8700
Air-Operated Models
Measurements in inches.
www.BuckChuckUSA.com1-800-228-BUCK 43
Manual Tork-Lok Fixtures
LONG SERIESAssembly # O.H. Arbor Assembly "C" Connector
AC 5110 4.30 AC 2110 AC 172 A
AC 5210 4.50 AC 2210 AC 172 A
AC 5310 4.77 AC 2310 AC 174 A
AC 5410 5.39 AC 2410 AC 472 A
AC 5510 5.70 AC 2510 AC 473 A
AC 5610 5.95 AC 2610 AC 672 A
AC 5710 6.27 AC 2710 AC 672 A
SHORT SERIESAssembly # O.H. Arbor Assembly "D" Connector
AC 12100 3.62 AC 8100 AC 12272
AC 12200 3.78 AC 8200 AC 12272
AC 12300 3.96 AC 8300 AC 12372
AC 12400 4.16 AC 8400 AC 12472
AC 12500 4.4 AC 8500 AC 12572
AC 12600 4.74 AC 8600 AC 12672
AC 12700 4.79 AC 8700 AC 12672
BASE ASSEMBLYAssembly # A B C
AC 6100 3.75 6.38 0.56AC 6400 4.50 6.88 0.56AC 6600 5.25 7.75 0.56
OPERATING INSTRUCTIONS1. Mount fixture on machine.2. Adjust expander with Allen wrench so that
part is a slip fit on collet. Be sure collet and arbor flats mate on both ends.
3. To clamp part, move handle clockwise.4. To release part, move handle
counterclockwise.
ORDERING INSTRUCTIONSA complete fixture is ready to mount on your machine. When ordering additional arbor assemblies for fixture use, indicate connector also. When ordering base assemblies, indicate connector(s) desired.
TO CHANGE ARBOR ASSEMBLIESFrom one size range to another (see chart above for arbor assembly and connector):
1. Remove cap screws and turn arbor assembly off the base clockwise.
2. CAUTION Handle must be in unlocked position.3. Turn replacement arbor assembly
counterclockwise into base until snug. Continue movement until holes line up. Replace cap screws.
ADAPTATION OF DRAWBAR MODELS1. Procure proper fixture base and connectors to
accommodate drawbar model you have (see chart above).
2. Remove drawbar connector (A) by backing out expander (B) with Allen wrench until connector is free. Remove retaining ring.
3. Insert fixture connector (C or D) by turning in expander (B) until flats mate and are firm on both ends. No retainer ring is necessary.
4. CAUTION Handle must be in unlocked position.
5. Turn assembly counterclockwise into base assembly until snug. Continue movement until holes line up. Replace cap screws.
Installation and Operating Instructions
TORK-LOK FIXTUREThe Tork-Lok Fixture is a powerful locking mechanism for use with Tork-Lok Arbors. It features low initial cost and little maintenance for milling and drilling operations.
Unlocked Position
ArborAssembly
BaseAssemblyLocked Position Unlocked Position
Expander Expander
For Fixture Use
DrawbarConnector
Fixture to ArborConnector
OUR BRANDS
FORKARDT MAIN OFFICE2155 Traversefi eld Dr
Traverse City, MI 49686Tel: (+1) 800-544-3823Fax: (+1) 231-995-8361
E-Mail: [email protected]
FORKARDT CHINABuilding, No.209, Taigu RoadShanghai Waigaoqiao F.T.Z.200131 P.R.CTel: 86-021-58683689E-mail: [email protected]
FORKARDT DEUTSCHLAND GMBHHeinrich-Hertz-Str. 7D-40699 ErkrathTel: (+49) 211-25 06-0Fax: (+49) 211-25 06-221E-Mail: [email protected]
FORKARDT FRANCE S.A.R.L.28 Avenue de BobignyF-93135 Noisy le Sec CédexTel: (+33) 1-4183 1240Fax: (+33) 1-4840 4759E-Mail: [email protected]
FORKARDT INDIA L.L.P.P No. 39, No. 5-5-35/187Ayyanna Ind Park IE Prashant NagarKukatpally, Hyderabad, AP. 500072Tel: 040-40020571Fax: 040-40020576E-mail: [email protected]
WWW.FORKARDT.COM