Legge®
Lever locks, mortice latches & nightlatches
Whilst IR Architectural Hardware has taken every care to ensure the accuracy of information, dataor advice contained in this literature, no liability in respect of such information or advice, whethergiven negligently or not, can be accepted by the company.
IR Architectural Hardware retains the right to amend the technical specification of any range ofequipment shown, without prior notice.
© IR 2001
May 2001
Uniclass EPIC
CI/SfB
L41818 D186
(31.59) X
1 2
The World’s No. 1
For more than a century, the name IR has been synonymouswith the very best in design, manufacture and installation ofarchitectural hardware.
A global leader in every sense of the term, IR has an unrivalledrecord in meeting and exceeding the demands of architects,designers, specifiers and buildiers throughout the world.
As one of IR’s major operating dvisions, IR Security & Safety Ltdis now the world’s largest supplier of architectural hardwareproducts and access and security systems. Through our tradingdivision IR Architectural Hardware, we offer the widest possiblechoice of hardware products and systems to satisfy everyconceivable need wherever commercial, private or public servicebuildings are created or refurbished.
Total quality assurance
All our products and systems are based on cutting edge technology, supported by majorinvestment in research and development and by modern manufacturing techniques.
Our world class reputation for reliability and durability is founded on a commitment tocontinuous improvement in everything we do.
We work constantly to enhance the performance levels and aesthetic qualities of everythingwe produce from a simple lever to a sophisticated automatic door system.
By giving uncompromising attention to detail at every stage of design,manufacture, assembly and inspection, we ensure that all our productsand systems meet the highest possible quality and conformity standards,and exceed the requirements of all applicable European Standards.
Total service excellenceOur expert and fully trained service teamsare dedicated to meeting and surpassingcustomers’ requirements at all times,providing prompt, nationwide assistanceand reliable support in any aspect ofservice you may require.
Our Technical Support Department willassist you with:Product selectionAdvice on InstallationTrouble shootingAdvice and information from our extensivedatabase of test data and certification.Call the Technical Support Department onFreephone 0800 834 102
Our Technical Consultants will assist youwith:Product selectionProduct specificationProvision of reference sitesFull quotation serviceProject aftercareOngoing maintenance and lifetime serviceTo contact your Technical Consultant, call08706 012012
Site VisitsA site visit service is available duringconstruction programmes to offer adviceon any aspect of fixing or application ofour products. For building refurbishmentor fire upgrading schemes this service isalso available to finalise requirements inadvance of preparing door hardwareschedules.
We also provide a FREE time-savingscheduling service.Our computer aided architectural hardwarescheduling programme will generate a fullironmongery schedule to yourspecification for any project level or size.
Further InformationFurther details of all our product rangesand services can also be found byaccessing our website atwww.irarchitecturalhardware.co.uk
43
Flexibility of a modular range Reversible LatchAll the locks in the Platform range arefitted with the unique Legge ‘TwistReversible’ latch feature.To reverse the latch simply pull, twist andrelease. It takes seconds and avoids theneed to open up the lockcase. Once fitted,the latch cannot be reversed withoutremoving the forend plate.
Co-ordinated, Modular Platform LockcasesJust 4 lockcases (and therefore 4 doorpreparation variants) make up a range of lockswhich include, latches, bathroom locks, slidingdoor locks, deadlocks, 3 lever locks, 5 leverlocks and 5 lever British Standard locks in 2backset sizes. This consistent matrix of dimensions, includingthe size and position of bolts, provides asignificant number of real benefits to specifiersand end users.
Interchangeability - upgrade or change lockfunction within standard door preparation,during installation or anytime in the future. Forexample, upgrade from a 3 lever lock to fullyBS compliant 5 lever lock without having to reprepare the door.
Common door preparation - instructions fordoor preparation can be given early, before thefinal decision on hardware, reducing delays ondoor supply.
Factory preparation - the simplified doorpreparation instructions enable accuratefactory preparation, giving higher quality andquicker on-site hardware installation.
All locks which have modular dimensionsare marked with this icon.
Simplified specification - with no need todetermine the hand of the lock until thepoint of installation.
Quicker installation - the operation takesjust seconds and can be carried out withthe lock already fitted into the door.
No risk of damage - there is no risk ofdamage or wastage as a result of openingup the lockcase. No more locks fitted withvital components missing.
Reduced stockholding - the reversiblefeature reduces stockholding by 50%across the complete range of lockfunctions.
5 lever BS lock 3 lever lock
Single Key ProfileA single steel key profile is used acrossthe complete range of Platform locks,with authorised Legge key blanks as anintegral part of the product and guaranteepackage.
Locks keyed alike - a series of locks for abuilding can be organised to operateacross the various security levels. Doorsfitted with 5 lever locks can be keyed towork other doors which are fitted with 3lever locks. The 3 lever standard keys willnot open the 5 lever locks therebycreating a natural hierarchy of security.Keyed Alike locks are indicated by thisicon.
Upgrading - locks can be replaced orupgraded from one security level toanother, or downgraded depending onchange of use, without introducingadditional keys into the system.
backset (b)
case size (a)
cent
res
(c)
Co-ordinated, modular platform lockcasesReversible latchSingle key profileMore robust constructionBS complianceMasterkeyed
Master Keyed SuitesLegge Platform locks can be offered asStandard Differ or Keyed Alike, as well asMaster Keyed to provide increased levels ofsecurity.The use of masterkeying is not permitted underthe detail of BS3621:1998.Master Keyed locks are indicated by this icon.
MK
KA
65
Heavy duty case - all the lockcases in the platform rangeare constructed using a heavier guage material, improvingresistance to forced entry.Anti-drill plate - a hardened steel plate is fitted onto the 5lever BS lock to prevent attack from drilling.Anti-saw bolts - 2 revolving hardened steel pins in thedeadbolt of the 5 lever locks prevent attack from sawingthrough the bolt.Anti-pick protected - the use of curtain protection acrossthe range prevents forced entry by picking.Reduced follower rotation - latchbolt withdrawal iseffected by only 54˚ lever rotation providing a moreefficient operation.Anti-jam bolt - bathroom locks are fitted with an anti-jammechanism.Heavy duty strikes - locks are supplied with either aheavy duty box strike or a heavy guage preformed flatstrike plate.
More Robust ConstructionMany of the advantages of the 5 lever BS lock construction are shared with the otherlock functions within the platform range, including stronger case construction, largerand stronger bolts, stronger follower springing and more robust strike plates.
5 lever BS locks
5 lever locks
3 lever locks
Bathroom locks
Latches
Heav
y du
ty c
ase
Anti-
drill
Anti-
saw
Anti-
pick
Reve
rsib
le la
tchb
olt
54˚ r
otat
ion
Anti-
jam
bol
t
Strik
e pl
ate
heavy duty box
heavy duty box
heavy duty flat
standard flat
standard flat
BS3621:1998 ComplianceLocks fully tested and compliant with therigorous standards of BS3621:1998 arealso available within the modularplatform, and are indicated within thebrochure with the icon below.
PLATFORM LOCKS
The Platform series of locks offers a scale of security from the high security of a BS 3621:1998 compliant 5 lever lock, to the medium security solutions offered by 3lever lock cases, or the simplicity of a latch. Such locks are ideally suited to applications where doors can be factory prepared(even before final hardware details have been decided), or where possible futurechange of use would enable the door to be upgraded from 3 lever to 5 lever, or fromnon BS to fully BS compliant without having to recut the door. The range includes Masterkeyed variants.
56415761564257621645176526452765964597651643176326432763964397632643L2763L764377631645MK1765MK2645MK2765MK1643MK1763MK2643MK2763MK9643MK9763MK9645MK9765MK
deadlockdeadlocksashlocksashlockdeadlockdeadlocksashlocksashlockslidingslidingdeadlockdeadlocksashlocksashlockslidingslidinglatchlatchbathroombathroomdeadlockdeadlocksashlocksashlockdeadlockdeadlocksashlocksashlockslidingslidingslidingsliding
5 lever5 lever5 lever5 lever5 lever5 lever5 lever5 lever5 lever5 lever3 lever3 lever3 lever3 lever3 lever3 lever
--
privacyprivacy5 lever5 lever5 lever5 lever3 lever3 lever3 lever3 lever3 lever3 lever5 lever5 lever
6476647664766476647664766476647664766476647664766476647664766476
4457445744574457445744574457445744574457445744574457445744574457
888899999910101010101011111111121212121313131313131212
lock
func
tion
secu
rity
case
siz
e (m
m)
BS c
ompl
iant
back
set (
mm
)
anti-
drill
mas
terk
eyed
anti-
saw
anti-
pick
bolt
thro
fix.
see
page
no.
BS
PAS TestsThe Legge 5642 mortice lock has been included insuccessful PAS tests:PAS 23-1:1999 General performance requirements for door assemblies,Clause 6.9 Door assembly resistance to soft body impactPAS 24-1:1999Enhanced security performance requirements for doorassemblies, Clause A.9.1 Soft body impact and A.10 Hardbody impact
Please call Technical Services on 0800 834102 for furtherdetails on specification.
87
Steel case black powder coated, withintegral anti-drill plate on cap and case.Steel box strike brass or satin chromeplated. Genuine brass trim plate for fittingto face of box strike plate available atextra cost.Forend: SS (stainless steel)
PB (polished brass)Additional 5 lever BS sashlock anddeadlock are available in a 51mm (2”)case size (see page 15).
5641 & 5761
Deadlock with 44mm or 57mm backset. Supplied with ref:980/973 escutcheons.
5642 & 5762
Sash locks with 44mm or 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Suitable for sprung lever furniture with8mm spindle.Twist reversible latchbolt.
The high security and durability of a BS 5lever lock used with Normbau nylonfurniture in a University library.
Typical applications would include bothinternal and external doors on thefollowing sectors:
• HealthHospitals and health centres, doctors surgery
• LeisureSports and leisure centres, clubs, theatres
• EducationSchools and colleges
• CommercialOffices, factory units, warehouses, laboratories
• RetailShops and restaurants, supermarkets
• ResidentialLocal Authority and private properties, sheltered housing schemes
Typical applications
The exceptional performance characteristics of the Legge Platform range of lockcasesmake them particularly suitable for use in commercial and residential buildings whichmay be subject to high levels of use and abuse.
a
25b
16
1876
16.5
134
11
a
25b
16
18
108
16.5
165
11
c
980 & 973 escutcheonsin polished brass.
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 57
5641
5761
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
5642
5762
For further information please contact the Technical Helpline 0800 834 102
Special ApplicationsLegge offers a bespoke service thatenables some standard products to beadapted to suit special door applications.Please contact Technical Services on 0800 834 102 for further details..
Legge Platform 5 lever locksto BS3621:1998
• BS3621:1998 compliant• 5 close gated levers with anti-pick device• 1000 differs• 3 plated steel keys• Keyhole protection• Brass deadbolt with 2 hardened steel inserts• 10 year guarantee
5BS
14
9 10
Steel case white powder coated.Reversible latchbolt.Brass deadbolt.Suitable for sprung lever furniture with8mm spindle.Steel strike powder coated gold or silvergrey as standard. Available plated at extracost.Forend: SS (stainless steel)
PB (polished brass)
1643 & 1763
Deadlock with 44mm or 57mm backset. May be keyed alike - 1643KA & 1763KA
Supplied with ref: 980/973 escutcheons.
2643 & 2763
Sash locks with 44mm or 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Suitable for sprung lever furniture with8mm spindle.May be keyed alike - 2643KA & 2763KA
9643 & 9763
Sliding door lock with 44mm or 57mmbackset.Sliding door lock with expanding brassclaw bolt. Supplied with locking plate, andref: 973 escutcheons.May be keyed alike - 9643KA & 9763KA
Steel case yellow powder coated.Brass deadbolt fitted with 2 revolvinghardened steel inserts (except 9645).Steel box strike powder coated gold orsilver grey. Genuine brass trim plate forfitting to face of box strike plate (notsuitable for 9645) available at extra cost.Forend: SS (stainless steel)
PB (polished brass)
1645 & 1765
Deadlock with 44mm or 57mm backset. May be keyed alike - 1645KA & 1765KA
Supplied with ref: 973 escutcheons.
2645 & 2765
Sash locks with 44mm or 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Suitable for sprung lever furniture with8mm spindle.Twist reversible latchbolt.May be keyed alike - 2645KA & 2765KA
9645 & 9765
Sliding door lock with 44mm or 57mmbackset. Expanding brass claw bolt for slidingdoors.May be keyed alike - 9645KA & 9765KA
Supplied with ref: 973 escutcheons
a
25b
16
11 1876
16.5
134
a
25b
11 18
a
25b
16
1876
16.5
134
a
25b
16
1876
16.5
134
11
a
25b
16
1876
16.5
134
1111
c 165
108
16
14
16.5
a
25b
11 18
c 165
108
16
14
16.5
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
2645
2765
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 -
1645
1765
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -964576 57 -9765
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 -
1643
1763
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
2643
2763
a - c
ase
size
(mm
)
b - b
acks
et (m
m)
c - c
entre
s (m
m)
64 44 57
76 57 57
9643
9763
For further information please contact the Technical Helpline 0800 834 102
Legge Platform 5 lever locks5
• 5 close gated levers with anti-pick device• 500 differs• Reversible latchbolt• 2 plated steel keys, unnumbered• Brass deadbolt with 2 hardened steel inserts• 5 year guarantee
KA
Legge Platform 3 lever locks
• 3 close gated levers • 100 differs• 2 plated steel keys, unnumbered• Brass deadbolt • 3 year guarantee
3
KA
12
Steel case black powder coatedFull 5 lever security with separate tripleverSteel box strike powder coated gold orsilver grey as standard. Genuine brasstrim plate for fitting to face of box strikeplate available at extra cost.Forend & Strikes: SS (stainless steel)
PB (polished brass)
2645MK & 2765MK
Sashlock with 44mm and 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres. Suitable for sprung lever furniture with8mm spindle.
1645MK & 1765MK
Deadlocks with 44mm and 57mmbackset. Supplied with ref: 973 escutcheons.
9645MK & 9765MK
Sliding door lock with 44mm and 57mmbackset.Expanding brass claw bolt for slidingdoors.Supplied with ref: 973 escutcheons.
Masterkey FeatureLegge Master Keyed locks offer systems with up to 200 differs for 5 lever locks.The use of masterkeying is not permitted under the detail of BS3621:1998.
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 572645MK
76 57 572765MK
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 -
1645MK
1765MK
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -9645MK76 57 -9765MK
11
Steel case powder coated white.Stainless steel or brass strike plate.Forend: SS (stainless steel)
PB (polished brass
2643L & 2763L
7643 & 7763
Architectural latch with 44mm or 57mmbackset. Suitable for bolt through fixings5mm Ø at 38mm centres. Suitable for sprung lever furniture with8mm spindle.
Bathroom lock with 44mm or 57mmbackset. Suitable for bolt through fixings 5mm Øat 38mm centres.5mm deadbolt follower and 8mm leverfollower.Suitable for sprung lever furniture with8mm spindle.
7763 bathroom lock in polished brass isused with matching brass Steden leverfurniture on a hotel bathroom.
a
25b14
1810
8
165
11
a
25b14
1810
817
165
11
c16
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 -
2643L
2763L
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
7643
7763
For further information please contact the Technical Helpline 0800 834 102
Legge Platform 5 lever locksMasterkeyed
• 5 close gated differ levers & trip lever• 200 differs per suite• Reversible brass latchbolt• 2 plated steel keys, numbered• Anti-pick keyhole protection• Brass deadbolt with 2 hardened steel inserts• 5 year guarantee
5
MK
Legge Platform latch andbathroom locks
• Dimensionally co-ordinated with the lever locks• Reversible latchbolt• Brass deadbolt
74
a
25b
16
1876
17
134
11
a
25b
16
1876
17
134
11
a
25b
11 18
c 165
108
16
14
17
13 14
NON MODULAR LOCKS
A series of lever locks which are in non modular cases. These locks offer a scale ofsecurity from the high security of a BS3621:1998 compliant 5 lever lock available asa 51mm (2”) sash and deadlock, to the economy of a 2 lever lock.
5 lever5 lever6 lever3 lever3 lever2 lever2 lever2 leverlatch only3 leverprivacy
1515151616161616171717
551155122766X3260/643260/7615715923783492L34923492B
deadlocksashlocksashlocksashlocksashlocksashlocksashlocksashlocklatchsashlockbathroom
lock
func
tion
secu
rity
5151766476516476152152152
case
siz
e (m
m)
3535574457354457127127127
back
set (
mm
)
BS c
ompl
iant
anti-
drill
anti-
saw
anti-
pick
bolt
thro
fix.
see
page
no.
Steel case white powder coated.Brass latchbolt reversible for left/righthand.Suitable for sprung lever furniture with8mm spindle.Steel strike powder coated gold or silvergrey as standard. Available plated at extracost.Forend: SS (stainless steel)
PB (polished brass)
1643MK & 1763MK
Deadlock with 44mm or 57mm backset.
Supplied with ref: 973 escutcheons.
2643MK & 2763MK
Sash locks with 44mm or 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.
9643MK & 9763MK
Sliding door lock with 44mm or 57mmbackset.Sliding door lock with expanding brassclaw bolt. Supplied with locking plate, andref: 973 escutcheons.
a
25b
16
1876
17
134
11
a
25b
16
1876
17
134
11
a
25b
11 18
c 165
108
16
14
17
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
76 57 -
1643MK
1763MK
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
2643MK
2763MK
a - c
ase
size
(mm
)
b - b
acks
et (m
m)
c - c
entre
s (m
m)
64 44 57
76 57 57
9643MK
9763MK
Legge Platform 3 lever locksMasterkeyed3
• 3 close gated levers• 60 differs per suite• Reversible latchbolt• Brass deadbolt• 2 steel keys• 3 year guarantee
MK
Masterkey FeatureLegge Master Keyed locks offer systems with up to 60 differs for 3 lever locks.The use of masterkeying is not permitted under the detail of BS3621:1998.
15 16
X-Tension FeatureThe unique Legge X-Tension featureenables the spring tension within the lockto be adjusted ‘in-situ’ to suit the weightof the lever furniture being used. This patented design ensures thatunsightly and ineffective drooping leverscan be quickly and easily rectified withoutremoving the lockcase or the leverfurniture.
Steel case black powder coated, withhardened steel protective plate.Steel box strike brass or satin chromeplated. Genuine brass trim plate for fittingto face of box strike plate available atextra cost.Forend: SS (stainless steel)
PB (polished brass)
5511
Deadlock with 35mm backset. Supplied with ref:980/973 escutcheons.
5512
Sash locks with 35mm backset. Suitable for sprung lever furniture with8mm spindle.
a
25b
16
1810
824
165
11
a
25b
1618
108
24
165
11
14
c
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
51 35 -5511
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
51 35 575512
Steel case powder coated brown.Capron® 8mm follower, suitable forsprung lever furniture with 8mm spindle.Forend & Strike: NP (nickel plated)
PB (polished brass)
3260
Sashlocks with 44mm and 57mmbackset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Suitable for sprung lever furniture with8mm spindle.Specify backset required.
157 / 159 / 2378
Sashlocks with 35/44/57mm backsets. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Suitable for sprung lever furniture with8mm spindle.
Steel case powder coated brown.Capron® 8mm follower, suitable forsprung lever furniture with 8mm spindle.Forend & Strike: NP (nickel plated)
PB (polished brass)
13
b
a
22
8.5
102
c19
13
152
13
b
a
22
8.5
102c
1913
152
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c - c
entre
s (m
m)
64 44 57
76 57 57
3260
3260
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
159
51 35 57157
2378
2766X
6 lever sashlock with 57mm backset. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.This lock incorporates the unique LeggeX-Tension feature which makes it suitablefor use with sprung or heavy unsprunglever furniture (see below).May be keyed alike - 2766XKA
b
a13
11 1617
c10
8
165
2512
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
76 57 572766X
For further information please contact the Technical Helpline 0800 834 102
Legge 5 lever BS Locks
• BS3621:1998 compliant• 5 close gated levers with built in anti pick device• 1000 differs• Reversible latchbolt• 3 plated steel solid bow keys• Brass deadbolt with 2 hardened steel inserts• 10 year guarantee
5BS
Legge 3 Lever Budget Locks
• Economic solution• 3 brass levers• 100 differs• Reversible latchbolt• 2 steel keys
3
Legge 2 Lever Budget Locks
• Economic solution• 2 brass levers• 24 differs• 2 die cast keys
3Legge 6 lever Locks
• 6 close gated differ levers• 1000 differs• Reversible brass latchbolt• 2 plated steel keys• Anti pick keyhole protection• Brass deadbolt with 2 hardened steel inserts• Brass or stainless steel flat strike• 10 year guarantee
6KA
17 18
3492B
Horizontal bathroom lock. 5mm deadboltfollower, 8mm follower for knob furniture.Latch is withdrawn by clockwise oranticlockwise knob operation. Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Forend: PB (Polished brass)
SS (Satin stainless steel) 9.5
1670 12
1
b13
a
25d
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
d- f
ollo
wer
bac
kset
(mm
)
152
51 1273492B
MORTICE LATCHES
A series of mortice latches ranging from fully sprung architectural latchessuitable for unsprung lever furniture, to simple tubular latches ideally suited foruse with sprung furniture in domestic applications.
37512512R52512S52512R82512S818937083709LK164176372137223722LK3724LK15101511
leverleverleverleverleverknob/leverleverleverleverleverleverleverleverknob/leverpush/pullpush/pull
bathroombathroombathroombathroombathroomlatchlatchlocking latchlatchlatchtubulartubulartubulartubularadjust. rolleradjust. roller
64/76767676761026476647664797995nana
19191919192020202020212121212121
oper
atio
n
lock
type
case
siz
e (m
m)
44/5757575757874460445744606076nana
back
set (
mm
)
reve
rs. l
atch
lock
able
unsp
rung
furn
iture
bolt
thro
ugh
see
page
no.
3492L
Architectural horizontal latch with 127mmbackset. Suitable for bolt through fixings5mm Ø at 38mm centres. 8mm follower suitable for knob furniture. 12
1
1670
b
a
25
9.5
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
d- f
ollo
wer
bac
kset
(mm
)
152
51 1273492L
3492
Horizontal sashlock with 127mm backset.Not available masterkeyed.Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Latch is withdrawn by clockwise oranticlockwise operation, particularlysuitable for knob furniture.Suitable for sprung lever furniture with8mm spindle.
a
d25
70
9.5 16
13
13
80
121
Steel case, white powder coated.Forend & Strike plate:SS (Stainless Steel)PB (Polished Brass)
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
d- f
ollo
wer
bac
kset
(mm
)
152
51 1273492
b
Legge Horizontal Locks &Latches
• Modular case• Especially suitable for knob furniture• 100 differs• Brass bolts• 2 steel keys• Double handed follower• 3 year guarantee
3
d
13
13
19 20
3751
Upright bathroom lock with 5mmdeadbolt follower and 8mm lever followersuitable for sprung lever furniture with8mm spindle.Suitable for bolt through fixings 5mm Øat 38mm centres.Forend: PB (Polished brass)
NP (Nickel plated)
2512R5 / 2512S5 / 2512R8 / 2512S8
Bathroom deadlatch.5mm or 8mm follower.Round or square forend. Specify size andstyle when ordering.Designed for use, when required, withthumbturn to operate locking function.
19c 10
2
8.5
13
152
b13 a
22
b
a
38 76
22
1411
10
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 57
76 57 57
3751
3751
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
76 57 -2512
Steel case zinc or powder coated.Suitable for bolt through furniture fixings,5mm Ø at 38mm centres.Capron® followers.Forend & Strike: SS (stainless steel)
PB (polished brass)NP (nickel plated)
164 latch in polished brass used with matching StedenStudio lever furniture.
189
Flat mortice latch with 87mm backset.With 8mm zinc die cast follower, suitablefor use with sprung lever furniture with8mm spindle.
3708
Architectural latch with 44mm backset.Suitable for bolt through fixings 5mm Øat 38mm centres. 8mm zinc die cast follower, suitable foruse with sprung lever furniture with 8mmspindle.
3709LK
Architectural latch with 60mm backset.Suitable for bolt through fixings, 5mm Øat 38mm centres. 8mm zinc die cast follower, suitable foruse with sprung lever furniture with 8mmspindle.Designed for use when required withthumbturn ref: 14 to operate lockingfunction.
Steel case zinc coated.Ideally suited to domestic applications,these latches offer an economic latch foruse with sprung lever furniture.Forend & Strike:NP (nickel plated steel) - 3708/3709PB (polished brass) - 189/164/176SS (stainless steel) - 164/176
102
14
22
12
87
76
11
64
13
22
11
44
76
11
38
38
76
13
22
11
60
76
11
38
3822
164 / 176
Architectural latches with 44mm and60mm backsets.Suitable for bolt through fixings 5mmØ at 38mm centres.Suitable for use with sprung leverfurniture with 8mm spindle.
1613
108
2460
b
a
12
25
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c - c
entre
s (m
m)
64 44 -
76 60 -
164
176
For further information please contact the Technical Helpline 0800 834 102
Legge Bathroom Locks
• Brass bolts• Reversible latchbolt• Accepts bolt through furniture fixings
3Legge Mortice Latches
21 22
Zinc coated steel case assembly, with8mm Capron® follower (tubular latches),suitable for use with sprung lever furniturewith 8mm spindle.Forend & Strike: NP (nickel plated steel)
EB (electro brassed steel)PB (polished brass)
Roller catches have a steel cage withbrass roller head. Forend finishes asindicated below.
3721 / 3722
Tubular latch with 44mm and 60mmbackset. Not suitable for bolt throughfixings, or unsprung lever furniture.Lifetime guarantee.
3722LK / 3724LK
Tubular latch with 60mm and 76mmbackset . Not suitable for bolt throughfixings, or unsprung lever furniture. Both latches are lockable when used witha separate thumbturn ref: 14.Lifetime guarantee.
1510
Brass adjustable roller catch providing apositive push-pull operation.Forend: SCP (Satin chrome plated)
PB (Polished brass)
1511
Brass adjustable roller catch providing apositive push-pull operation.Forend: SS (Stainless steel)
PB (Polished brass)
25
18
9
13
25 58
9.5
25a
5722ø
b
9.5
25a
5722ø
b
c
51
35
22
28
13
76
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- c
entre
s (m
m)
64 44 -
79 60 -
3721
3722
a- c
ase
size
(mm
)
b- b
acks
et (m
m)
c- l
ocki
ng b
acks
et (m
m)
79 60 22
95 76 28
3722LK
3724LK
RIM LOCKS AND NIGHTLATCHES
A series of surface mounted nightlatches with both deadlocking and non deadlockingfunctions within the same product. They are used in conjunction with a rim cylinder,and are available for use on inward and outward opening doors.A series of surface mounted rim locks, ideally suited to traditional or perioddomestic applications.
707DL727DL323404DL424DL6621362143214424762098
nightlatchnightlatchnightlatchnightlatchnightlatchnightlatchrim lockrim latchrim deadlockrim lockrim lock
cylindercylindercylindercylindercylindercylindertumblersnibtumblertumblerlever
key/knobkey/knobkey/knobkey/knobkey/knobkey/knobknob knobknobknoblever
2323232323232424242424
lock
case
type
lock
ing
type
oper
atio
n
reve
rsib
le
mas
terk
eyed
see
page
no.
Legge Tubular Latches &Roller Catches
• Fixed using a 22mmØ drill bit• Locking tubular latch variants
23 24
A range of surface mounted casessuitable for use with a selection of knobswith 8mm spindles. Ideally suited totraditional or period domestic applicationson panel doors or on T&G doors onsheds or garages etc.Unless shown otherwise, the latchboltsare reversible (2098 please state handand if reversed bolt is required).Note: all locks below should be used inconjunction with BS deadlock (p7 & 12)
2136
Rim lock with 12 differs and supplied with 2 plated steel keys.Finish: SV (Powder coated silver grey)
PB (Polished brass) MB (Matt Black)
2143
2476
Rim lock with 12 differs and supplied with 2 plated steel keys.Finish: SV (Powder coated silver grey)
PB (Polished brass) MB (Matt Black)
Rim latch with additional privacy bolt operated by integral snib.Finish: SV (Powder coated silver grey)
PB (Polished brass) MB (Matt Black)
2144
Rim deadlock with 12 differs and supplied with 2 plated steelkeys.Finish: SV (Powder coated silver grey)
PB (Polished brass) MB (Matt Black)
2098
Upright rim lock with 12 differs and supplied with 2 platedsteel keys.Particularly suitable for caravans and mobile units.Available as left and right hand, inward and outward openingwith lever furniture available to suit. Please state hand whenordering.Finish: SV (Powder coated silver grey)
707DL / 727DL
Multifunction nightlatch with clockwise or anticlockwiseknob operation to withdraw latch. When deadlockingfunction is selected, latch and knob are rendered inoperableby full turn of key from outside.Reversible brass latch bolt for use on outward openingdoors (use with strike to special order).Finishes: SCP/SV; PB/SV; PB/BP: SCP/CP (see below)Silver bodied nightlatch has a chrome plated knob. Thebrass plated body has a brass plated knob.
323
404DL / 424DL
Surface mounted nightlatches operated byrim cylinder from outside and by snib/turnfrom inside. For doors 29 - 64mm thick.Supplied c/w 5 pin rim cylinder with looserose and nickel silver keys. Cylinders canbe supplied for master, submaster orgrandmaster suites. Matching cylinderpulls can be supplied on request.Note: all the nightlatches should be usedin conjunction with BS deadlock (p7 & 15)
66
Traditional rim nightlatch design. Non deadlocking. Bolt canbe held in withdrawn position by snib.Reversible brass latch bolt for use on outward openingdoors (use with strike to special order).Finishes: PB/BP; PB/GD (see below)Knob finishes: Brown (GD case);
Brass plate (BP cases)
Deadlocking nightlatch with concealed case fixing. Bolt isautomatically deadlocked when door is closed. Knob can bedeadlocked by key before closing the door, or with the doorin the closed position. The bolt can be held open by pushbutton. Not suitable for use on outward opening doors.Finishes: PB/GD; PB/BP (see below)Gold bodied nightlatch has a brown powder coated knob,and brass plated body has a brass plated knob.Not available masterkeyed.
Multifunction nightlatches with concealed case fixing. Boltand knob can be deadlocked from outside by full turn of key.Bolt can be locked by snib from inside.Reversible brass latch bolt for use on outward openingdoors (use with strike to special order).Finishes: SCP/SV; PB/GD; PB/BP (see below)Knob finishes: Black (SV case); Brown (GD case); Brassplated (BP cases)
SCP/SV (satin chrome cylinder/silver case); PB/SV (polished brass cylinder/silver case);
PB/BP (polished brass cylinder/brass plated case); PB/GD (polished brass cylinder/gold case);
SCP/CP (satin chrome cylinder/polished chrome case).
22
31
b19
3057
a
2532
6761
1719
27
a
b
727DL: a-73mm / b-44mm
707DL: a-89mm / b-60mm
95
64
31
28.5
32
24
14.540
51
9.5 17
73
14312
113 23
108
76 23
17
73
108
51 23
73
179.5
12
113 25
105
199.5
152
41
12
14
28
1924
67
19
31
6
92
60
115
2257
4413
67 21
15
8.5
For further information please contact the Technical Helpline 0800 834 102
Legge Nightlatches
• Surface mounted• Reversible bolt (where indicated) for use on
outward opening doors• Supplied with 5 pin cylinder• Deadlocking / non deadlocking • Suitable for masterkeying• Hold back function
MK
Legge Rim Locks & Latches2
125 26
NUMERICAL INDEX
descriptiontraditional rim nightlatch2 lever mortice sash lock2 lever mortice sash lock
architectural mortice latcharchitectural mortice latch
flat mortice latchsecurity nightlatch
multifunction rim nightlatchmultifunction rim nightlatch
multifunction nightlatchmultifunction nightlatch
covered escutcheonplain escutcheon
roller catchroller catch
3 lever platform deadlock3 lever platform deadlock - masterkeyed
5 lever platform deadlock5 lever platform deadlock - masterkeyed
3 lever platform deadlock3 lever platform deadlock - masterkeyed
5 lever platform deadlock5 lever platform deadlock - masterkeyed
rim lock in upright caserim lock
rim latch with snib boltrim deadbolt
2 lever mortice sash lockrim lock
mortice bathroom deadlock3 lever platform sash lock
platform latch3 lever platform sashlock - masterkeyed
description5 lever platform sash lock
5 lever platform sash lock - masterkeyed3 lever platform sash lock
platform latch3 lever platform sashlock - masterkeyed
5 lever platform sash lock5 lever platform sash lock - masterkeyed
3 lever mortice sash lock3 lever horizontal sashlock
horizontal bathroom lockhorizontal mortice latch
flat mortice latchflat mortice latch, lockable
tubular latchtubular latch
tubular latch, lockabletubular latch, lockable
mortice bathroom lock5 lever BS deadlock5 lever BS sashlock
5 lever BS platform deadlock5 lever BS platform sashlock5 lever BS platform deadlock5 lever BS platform sashlock
6 lever X-Tension sashlockplatform bathroom lockplatform bathroom lock
3 lever platform sliding door lock3 lever platform sliding - masterkeyed
5 lever platform sliding door lock5 lever platform sliding - masterkeyed
3 lever platform sliding door lock3 lever platform sliding - masterkeyed
page23161620202023232323238821211013912101391224242424162419101113
ref66
157159164176189323
404DL424DL707DL727DL
973980
151015111643
1643MK1645
1645MK1763
1763MK1765
1765MK20982136214321442378247625122643
2643L2643MK
ref2645
2645MK2763
2763L2763MK
27652765MK
32603492
3492B3492L3708
3709LK37213722
3722LK3724LK
3751551155125641564257615762
6276X764377639643
9643MK9645
9645MK9763
9763MK
page91210111391216171717202021212121191515888815111110139121013
Full fixing instructions are provided, but ifthere is any doubt about compatibility, orthe suitability of any Legge rebate set to aparticular application please contact ourTechnical Services Department.
rebate 59 64 2567 2566 41 41 59 2567 42 49 42 59 56 56
13mm
25mm
lock
ref
157/
159/
2378
164/
176
189
1511
1643
/176
3
1645
/176
5
2378
2512
2643
/276
3
2643
L/ 2
763L
2645
/276
5
3260
3492
3492
B
rebate
56 08 08
21 21 59 46 4842 42 41 42 42 - -13mm
25mm
lock
ref
3492
L
3708
3709
LK
3721
/372
2
3722
LK/
3724
LK
3751
5264
D/52
76D
2766
X
5511
5512
5641
/576
1
5642
/576
2
7643
/776
3
9643
/976
3
9645
08 21 41 42 46 48 49
56 59 64 2567
The Platform range of modular locks uses a simple means of numbering whichindicates the type of lock, the size and finish. This can be used as a quick reference
to identification (see below)
261 2566 2567D
Legge Rebate Sets
A series of rebate sets is available to enablethe installation of Legge mortice locks andlatches into rebated doors. Most rebate setsare available to suit both 13mm and 25mmrebate depths.