Difficulty Rating: Beginner
Just KissesDesigned by Elise Lea for RKwww.robertkaufman.com
Featuring
UNITED WE STAND
For questions about this pattern, please email [email protected].
Finished quilt measures: 46” x 63”
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
K001-140 NIGHTFALL
AWUD-18411-202 AMERICANA
ANQD-18327-195 BRIGHT
AWUD-18412-202 AMERICANA
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D2/3 yard (one full panel)
2/3 yard (one full panel)
1/2 yard
1-1/8 yard
1/2 yard
Copyright 2018, Robert KaufmanFor individual use only - Not for resale
You will also need:3 yards for backing
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
Notes Before You Begin
K001-7 TOMATO
Binding
From Fabric A, fussy cut:one 22-1/2” x 36-1/2” center panel
From Fabric B, fussy cut:eight 9-1/2” squares
From Fabric C, cut:three 5” x WOF strips. Sew together, end-to-end, then trim: two 5” x 42-1/2” strips
Cutting Instructions
page 3
Step 1: Sew the 3-1/2” x 36-1/2” Fabric D strips to the top and bottom of the Fabric A center panel. Press. Sew the 3-1/2” x 28-1/2” Fabric D strips to the left and right edges of the Fabric A center panel. Press.
Assemble the Quilt Center
From Fabric C, cut:four 3-1/2” x WOF strips. Subcut: two 3-1/2” x 36-1/2” top/bottom center borders two 3-1/2” x 28-1/2” side center bordersnine 2-1/2” x WOF strips. Subcut: six 2-1/2” x 9-1/2” block sashing strips Sew the remaining strips together, end-to-end, then trim: four 2-1/2” x 42-1/2” row sashing strips two 2-1/2” x 63-1/2” side outer strips
From the Binding Fabric, cut:six 2-1/2” x WOF strips
Step 2: Gather four Fabric B squares and three 2-1/2” x 9-1/2” Fabric D block sashing strips. Sew together to form a row, placing a block sashing strip between each Fabric B square. Press. Repeat to make a second row like this.
Assemble the Rows
Step 3: Gather two 2-1/2” x 42-1/2” Fabric D strips and one Fabric C strip. Sew together along the longest edges to form a row, placing the Fabric C piece between the Fabric D strips. Press. Repeat to make a second row like this.
page 4
This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2018. All rights reserved.
Step 4: Sew a completed Step 2 row to the top and bottom of the Step 1 quilt center. Press. Sew a completed Step 3 row to the top and bottom of the quilt. Press.
Step 5: Sew a 2-1/2” x 63-1/2” Fabric D strip to the left and right edges of the quilt. Press.
Your quilt top is complete. Baste, quilt, bind and enjoy!
Assemble the Quilt