Extend and switch USB peripherals between multiple locations
A Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network
A Extends USB peripherals up to 330 feet (100 meters) point-to-point over one CATx cable
A Supports USB 2.0/1.0 devices with data rates up to 480 Mbps
A Choice of rack-mountable and architectural form factors
A USB switching controller lets you easily create USB switching systems
USB Extender Plus Series
USB
TWISTED PAIR EXTENDER FOR USB PERIPHERALS
Introduction
The USB Extender Plus Series extends and switches USB signals
from peripheral devices to a host computer up to 1,980 feet
(600 meters) through a Gigabit Ethernet network or up to 330 feet
(100 meters) point-to-point over one CATx cable. It supports
USB 2.0/1.0 devices with data rates up to 480 Mbps and it is
compatible with USB 3.0 devices that can operate at USB 2.0 data
rates. The transmitter includes USB peripheral emulation to enable
booting a host computer that is not connected to a keyboard or
mouse. To simplify device integration, the receiver features a built-in,
active four-port hub. The controller provides simple setup and control
for creating a distributed USB matrix switching system over a Gigabit
Ethernet network. Available in various form factors, the USB Extender
Plus Series supports USB peripherals such as keyboards, mice,
mass storage devices, and webcams in pro AV environments.
The USB Extender Plus Series is capable of transmitting USB signals
long distances over a CATx twisted pair infrastructure. For distances
up to 330 feet (100 meters), installation of the USB Extender Plus
enables direct connection of USB peripherals to the remote host
computer without needing additional IP network drops, equipment,
software, or drivers.
Where longer distances are required or when pairing one transmitter
to multiple receivers, the USB Extender Plus Series transmitter and
receiver can be connected to a Gigabit Ethernet switch located up to
330 feet (100 meters) away to extend the total distance to 660 feet
(200 meters). The signal can be extended through a network of up
to five Gigabit Ethernet switches, for a total transmission distance of
1,980 feet (600 meters).
Transmitters and receivers are available in three form factors that
can be mixed and matched for optimum integration flexibility. The
compact, 1-inch quarter rack width metal enclosure is designed for
desktop, under desk, lectern, or rack mounting. The USB Extender
Plus AAP model provides convenient and elegant architectural USB
connectivity. The USB Extender Plus D is a decorator-style wallplate
that fits into a single-gang wall box.
The USB Plus Matrix Controller provides a simple management
interface to create USB switching systems using up to 64 USB
Extender Plus Series transmitters and receivers. Any AV control
processor can easily control USB switching using SIS commands
sent via Ethernet or RS-232. The system can be configured quickly
and easily using Extron's Product Configuration Software - PCS.
Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network
Extends USB peripherals over one CATx cable point-to-point up to 330 feet (100 meters)
Supports USB 2.0/1.0 devices with data rates up to 480 Mbps. Compatible with USB 3.0 devices that can operate at USB 2.0 data rates Enables bulk, control, interrupt, and isochronous transfers as defined by the USB specification.
Receiver features an integrated four-port hub with 5 Volts, 500 mA available on each port Allows simultaneous connection to multiple peripheral devices such as the Extron Annotator 300, mass storage devices, keyboards, mice, or other HID – Human Interface Devices.
One transmitter can connect to four receiversUsing a Gigabit Ethernet switch, one transmitter can support up to four receivers via an IP network.
Peripheral emulation Offers increased system reliability by emulating a connection between the host and an HID-compliant keyboard and mouse.
Real-time status LED indicators for troubleshooting and monitoring Provides visual confirmation of port activity between an active host and each connected peripheral device.
Choice of rack-mountable and architectural form factors Available in a compact, 1-inch rack-mountable metal enclosure, an AAP - Architectural Adapter Plate, and a single-gang decorator-style wallplate for easy integration into a variety of environments.
USB switching controller lets you easily create USB switching systemsOne controller can manage a switcher configuration of up to 64 USB Extender Plus Series transmitters and receivers. Enables the use of serial or IP commands for integration into a control system.
Device class filtering on select models restricts the range of device types to HID and smart card readers - USB Extender Plus HIDDevice class filtering prevents unauthorized downloading or uploading of content via the USB port in secure environments. The USB Extender Plus HID is configured at the factory, such that device class filtering cannot be removed or altered in the field.
Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.
FEATURES
Gigabit Ethernet Switch
50/60 Hz
100-240VAC 1.0A MAX
OVER TPSIG
OUT
LINK
REMOTEOUTPUTSINPUTS
RS-232 IR
1 1UNIVERSAL HDMI DISPLAYPORT2 3 HDMI 2A HDMI 2B
Tx Rx G Tx Rx
CONTACTLAN
RESET
USB 1
1
2
2 3
RS-232
Tx Rx GDTP
HDBT
HOST
POWER
12V1.0A MAX
INP
UT
OU
TP
UT
1
2
3
4
POWER
12V
1.0A MAX
INP
UT
OU
TP
UT
S
ExtronAnnotator 300HDCP-Compliant Annotation Processor with DTP Extension
CAT 5/5e/6/7up to 330' (100m)
CAT 5/5e/6/7up to 330' (100m)
USB TouchscreenDisplay
ExtronUSB Extender Plus TTwisted Pair Transmitter for USB Peripherals
ExtronUSB Extender Plus RTwisted Pair Receiver for USB Peripherals
Projector/Display
HDMI
USBUSB
50/60 Hz
100-240VAC 1.0A MAX
OVER TPSIG
OUT
LINK
REMOTEOUTPUTSINPUTS
RS-232 IR
1 1UNIVERSAL HDMI DISPLAYPORT2 3 HDMI 2A HDMI 2B
Tx Rx G Tx Rx
CONTACTLAN
RESET
USB 1
1
2
2 3
RS-232
Tx Rx GDTP
HDBT
HOST
POWER
12V1.0A MAX
INP
UT
OU
TP
UT
1
2
3
4
POWER
12V
1.0A MAX
INP
UT
OU
TP
UT
S
ExtronAnnotator 300HDCP-Compliant Annotation Processor with DTP Extension
CAT 5/5e/6/7up to 330' (100m)
USB TouchscreenDisplay
ExtronUSB Extender Plus TTwisted Pair Transmitter for USB Peripherals
ExtronUSB Extender Plus RTwisted Pair Receiver for USB Peripherals
Projector/Display
HDMI
USBUSB
DXP 88 HD 4K PLUSS/PDIF
1
2
AUD
IO O
UTP
UTS
OU
TPU
TS
INPU
TS
100-240V ~ --A MAX
50-60 Hz
1
5
2
6
3
7
4
8
1
5
2
6
3
7
4
8L R
REMOTE LAN
Tx Rx GRESET
GTx Rx RTS CTS
COM 1
GTx Rx
COM 2
V C G
VOL RELAYS
1 2 C
1 2 3 4 G
DIGITAL I/O
PWR OUT = 6W
eBUS
+V +S -S G
LAN
IPCP PRO 250
IR/S
S G
iPad
Help SystemOff
Display
RoomControl
Off
Mute
Screen
Lighting December 15, 2013 - 7:58 AM AudioControl
Volume
Mute
Tuner 1 2 3VCRLaptop PC DVDDocCam
TunerOn
Channel
Last
Presets
MorePresets
321
654
987
Enter0
Extron
21
43
HOST
LINK
1 2
3 4
STATUS
HUB
GTx Rx RTS CTS
COM POWER12V 0.2A MAX
LAN / PoE
MODEL 80
FLAT PANEL
WiFi 1 2 3 4
USB PLUS MATRIX
Station #6
Station #5
Gigabit Ethernet Switch
Tablet withExtron Control App
CPU
HDMI
HDMI HDMI
HDMI
Ethernet EthernetEthernet
USB
Discovery WallWorkstations (Equipment Rack)
Station #1
Station #2
Station #3
Station #4
Display #1
Display #2
Display #3
Extron IPCP Pro 250IP Link Pro Control Processor
Ethernet
Ethernet
Ethernet
ExtronUSB Extender Plus TTwisted Pair TransmitterFor USB Peripherals Extron
USB Extender Plus D RTwisted Pair Receiver for USB Peripherals
ExtronDXP 88 HD 4K PlusMatrix Switcher
USB
EthernetEthernet
ExtronUSB Plus Matrix ControllerController for USB Transmitters and Receivers
Touch Display
Applications
POINT-TO-POINTA single CATx cable connects any transmitter and receiver up to 330 feet (100 meters) apart.
NETWORKEDCATx cables connect any transmitter and receiver via a Gigabit Ethernet Network, of up to five switches, up to 1,980 feet (600 meters) apart.
SWITCHEDCATx cables connect multiple transmitters and receivers via a Gigabit Ethernet Network, of up to five switches, up to 1,980 feet (600 meters) apart, with connections between the transmitters and receivers dynamically controlled by the USB Plus Matrix Controller.
WORLDWIDE SALES OFFICES
www.extron.com
Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London • Frank fur t
Madr id • Stockholm • Amersfoor t • Moscow • Duba i • Johannesburg • Te l Av iv • Sydney • Melbourne
New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Hong Kong • Tok yo
Specifications
© 2019 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.
08-201968-3136-01 REV. A1Letter - English - NP
USB EXTENDER PLUS T/R SERIES
USB host support xHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1)USB data rates Low speed (1.5 Mbps), full speed (12 Mbps), high speed
(480 Mbps)USB host — Tx unitsNumber/signal type 1 USBUSB hub — Rx units Number/signal type (1) 4-port USB hubInterconnection between transmitter and receiverConnectors 1 female RJ-45 per unitSignal transmission distancePoint to point Up to 330' (100 m)Over the network Up to 1980' (600 m)**NOTE: **Over the network distance is through connection of up to five network switches.Power supply External
Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A
Enclosure type Metal
GENERAL
Regulatory complianceSafety CE, c-UL, KCC, ULEMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Class AEnvironmental Complies with the appropriate requirements of RoHS,
WEEE
USB PLUS MATRIX CONTROLLER
Ethernet controlNetwork interface controllers (NICs) 1Serial controlQuantity/type 1 bidirectional RS-232
GENERAL
Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumptionDevice and power supply 2.0 watts, 100-240 VAC, 50-60 HzMountingRack mount Yes, with optional 1U rack shelf or back of the rack
mounting kitFurniture mount Yes, with optional bracket kitEnclosure type MetalWarranty 3 years parts and laborNOTE: All nominal levels are at ±10%.
Model Version Description Part numberUSB Extender Plus T Transmitter 60-1471-12USB Extender Plus R Receiver 60-1471-13USB Extender Plus D T Transmitter - Decorator-Style Version - White 60-1473-13USB Extender Plus D R Receiver - Decorator-Style Version - White 60-1473-23USB Extender Plus AAP T Transmitter - AAP Version - Black 60-1472-12USB Extender Plus AAP R Receiver - AAP Version - Black 60-1472-22USB Extender Plus AAP R Receiver - AAP Version - White 60-1472-23USB Extender Plus T HID HID Transmitter 60-1539-12USB Extender Plus R HID HID Receiver 60-1539-13USB Plus Matrix Controller Controller 42-267-01
For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.
Form factors can be mixed and matched between transmitters and
receivers for mounting in all types of furniture and locations.
USB Extender Plus T
USB Extender Plus AAP T - Front
USB Extender Plus R
USB Extender Plus AAP R - Front
Architectural Adapter Plates
Rack-Mount
Decorator-Style Wall Plates
USB Extender Plus D T - Front USB Extender Plus D R - Front