STARS - Start up
User logins into STARS software
STARS - Start up
STARS main menu is loaded with list of items to begin Aircraft analysis function
STARS - Download Data from the Aircraft or Location
User can download flight data from the recorder connected via MPI
User selects the type of download device to use for downloading operation
STARS - Download Data from the Aircraft or Location
User chooses download option, specifies by pressing the browse button to allocate where the data file should be stored and naming the file to be downloaded
STARS - Download Data from the Aircraft or Location
User can then import flight data into STARS alternatively downloaded or stored from a specific device such as USB, QAR or PCMCIA card
STARS - Download Data from the Aircraft or Location
User then browses storage devices to load and import the data file required for replay and analysis
STARS - Download Data from the Aircraft or Location
User selects send flight data to store the downloaded data file ready for analysis
STARS - Download Data from the Aircraft or Location
User nominates a location using an explorer window to store downloaded files
STARS - Download Data from the Aircraft or Location
User selects flight data ready to replay and convert from raw format into engineering units
STARS - Replay Data
Flight data file is selected from a specific location ready to replay in STARS.
STARS - Replay Data
User clicks on Display EU report to design or run a report based on the downloaded data selected
STARS - Replay Data
Parametres are selected in the report design section, time adjusted if a certain flight is required
STARS - Replay Data
User clicks view report in the engineering unit screen to then view the report with all parameters nominated in both a listing and graphical trace.
STARS - Replay Data
User selects sensor test & monitoring to analyse sensors on the aircraft are in correct position
STARS - Calibrate Aircraft Parameters
User selects the appropriate parameter to adjust its sensor while STARS is connected to the aircraft FDR. Aircraft details are stored to print a report or export to excel document
STARS - Calibrate Aircraft Parameters
STARS - Calibrate Aircraft ParametersUser changes range for sensor to confirm pass/fail
The User selects a parameter to adjust sensor readings to the correct range
STARS - Calibrate Aircraft ParametersUser saves range for Aircraft sensor
Once the ideal range is found the red area turns green to pass the new reading.
The user saves this range and the next parameter is selected.