Download - Variaxis C-600
Variaxis C-600[ 5-axis Vertical Machining Center ]
02 03
Variaxis C-600
Shown with optional equipment
Variaxis C-600
Simultaneous 5-axis Vertical Machining Center
Your new portal to simultaneous 5-axis machining.Designed to provide you with maximum value.
Machine all sides of a workpiece in a single setup thanks to the rotary/tilt table.
Spindle specifications available for a wide range of machining requirements.
Tool storage capabilities including 30 (standard), 60, 90 and 120 (options).
Wide variety of automation equipment such as 2-pallet changer available.
Next generation MAZATROL SmoothAi CNC system.
●
●
●
●
Workpiece:
Fastener
Aerospacecomponent
Workpiece:
Bracket
Transportation industrycomponent
Workpiece:
Blower
General industrycomponent
Workpiece:
Control arm
Automotivecomponent
02 03
Main spindle
Main spindle
Variaxis C-600
04 05
Spindle specifications to meet a wide variety of machining requirements
Machine Design
The high-rigidity spindle can perform heavy-duty
machining of steel as well as high-speed machining of
non-ferrous materials such as aluminum. High-speed
and high-torque specifications are available.
Large machining area and compact spindle cartridge allow
short tools to be used for high-accuracy machining.
High-rigidity table High-speed automatic tool changer
The tilting rotary table is rigidly supported on both ends to ensure high-speed, high-accuracy machining. The B axis and C axis both utilize a roller gear cam to eliminate backlash.
Cam-driven double-arm automatic tool changer is
designed to drastically reduce chip-to-chip time.
H450 mm (17.72")
ø730 mm (ø28.74")
Max.workpiecesize
Table load capacity
500 kg (1102 lbs)
Tool magazine
The standard tool magazine has a storage capacity of 30 tools.
60, 90,120-tool options are available.
●
●
●
Max. tool length (from tool tip to gauge line) 300 mm (11.81")
Tool diameter 80 mm (3.15") (with adjacent pockets empty 130 mm (5.12"))
Max. tool weight 8 kg (18 lbs) (120 kg (265 lbs) total weight of tools in magazine)
SpeedStandard High-torque <option> High-speed <option>
12000 rpm 15000 rpm 18000 rpm 20000 rpm
Output (40% ED/30 min. rating) 11 kW (15 hp) 46 kW (62 hp) 30 kW (40 hp) 42 kW (56 hp)
Max. torque (40% ED/30 min. rating) 70 N·m (52 ft·lbs) 200 N·m (148 ft·lbs) 105 N·m (77 ft·lbs) 161 N·m (119 ft·lbs)
Tool shank No.40/BBT-40/HSK-A63 No.40/BBT-40/HSK-A63 No.40/BBT-40/HSK-A63 No.40/BBT-40/HSK-A63
Compact spindle cartridge minimizes workpiece interference
04 05
Variaxis C-600
06 07
Automation Higher Efficiency
The next workpiece can be set up during
the machining of the current workpiece
for higher productivity.
When the machine is not operated for a specified period of time, the machine worklights and the CNC backlight are turned
off automatically. They are automatically turned on when the motion sensor detects the return of the operator.
The Energy Dashboard provides a convenient visual monitoring
of energy consumption and analysis (optional electrical power
monitor required).
Nozzles inside the main tank circulate
coolant to prevent the accumulation of
chips and sludge. More than 95% of
particles larger than 20 μm are removed
by separation by the cyclone filter.
Thanks to these features, the coolant
tank stays clean and the service life of
the coolant is extended.
Robot interface is an available option.
Parts can be automatically
loaded/unloaded over extended
periods of operation.
Hydraulic power is supplied through the pallet for hydraulic fixtures. The maximum port number is 9 ports.
SMOOTH RCC is a management software for the robot cell, which can perform high-mix, low-volume production. This provides a convenient display of operation status and production scheduling to the operator on the optional CNC second monitor.
2-pallet changer option Auto-power off option
Energy Dashboard option
Clean coolant system option
Robot interface option
Preparation for hydraulic fixtures option
PCD ø42 (1.65")
Unit: mm (inch)
( )
( )
22.5°
45°
Y
Y
X
-0.0
2-0
.04
18
Y-Y
X
Process screen displayTotal energy consumption(of workpiece in operation)Current energy consumption
Sub tank
Sludge settled in the collecting drain cup is removed.
Return
To machine Main tank
●
●
Energy consumptiondisplayed on graph
Display approximate CO2 emission from electricalpower generation and electrical power cost
Energy consumption by workpieces
- 0.
0008
"0.7
1"-0.0
01
ø100 0+0.035 +0.0014"ø3.94" 0
C axis
B axis
P-14 (1 place)
P-1aA (8 place)
06 07
09
Variaxis C-600
Cutting Adviser Ai Thermal Shield
Provides assistance to the operator to obtain most
productive cutting conditions.
New algorithms automatically determine the amount of
compensation to be applied based on changes in the
temperature to ensure even higher machining accuracy.
Next generation MAZATROL Smooth CNC system
The newest MAZATROL CNC
system is designed to meet your
production requirements
in today’s constantly changing
manufacturing environment.
Shown with optional second monitor for SmoothAi Spindle and SMOOTH RCC
Convenient management of data required to execute machining programs
Tool data
Fixtures
Coordinates
Parameters
Workpiece 3D model
●
●
●
●
●
Machining features, including cycle time, finished surface and machining shape, can
be adjusted by slider switches on the display according to material requirements
and machining methods. This is especially effective for complex workpiece contours
defined in small program increments. Once the desired results are obtained, the
settings can be stored in memory so that they can be easily used again in the future.
Additionally, the rotary axis acceleration tuning parameter can now be adjusted by
a slider switch and operators have access to new options for selecting speed or
accuracy as a priority.
Convenient Parameter Setting and Fine Tuning Function: SMOOTH MACHINING CONFIGURATION
File management
0908
10 11
Variaxis C-600
VARIAXIS C-600
Stroke X-axis travel (spindle head left/right) 650 mm (25.59")Y-axis travel (spindle head back/forth) 550 mm (21.65")Z-axis travel (spindle head up/down) 530 mm (20.87")B-axis travel (table tilt) -30° ~ +120°C-axis travel (table rotation) ±360°
Table Table size ø600 mm × Width 500 mm (ø23.62" × 19.69")Max. workpiece size ø730 mm × 450 mm (ø28.74" × 17.72")Table load capacity (evenly distributed) 500 kg (1102 lbs) Table surface configuration M16×P2 (5/8-11 UNC) tap 20
Milling Spindle Max. spindle speed 12000 rpmSpindle taper No. 40Spindle bearing I.D. ø70 mm (ø2.76")
Feedrate Rapid traverse rate (X, Y, Z axis) 42 m/min (1654 ipm) Rapid traverse rate (B, C axis) 30 rpmSimultaneously controlled axes 5-axisMin. indexing increment (B, C axis) 0.0001°
Automatic tool changer
Tool shank configuration CAT No. 40Tool storage capacity 30 toolsMax. tool diameter/length (from gauge line)/weight ø80 mm/300 mm/8 kg (ø3.15"/11.81"/18 lbs) Max. tool diameter with adjacent tool pockets empty ø130 mm (ø5.12")Tool selection method MAZATROL random memory (Random pocket assigntment)
Tool change time (chip-to-chip) 4.5 sec. Motors Spindle motor (40% ED (30 min. rating)/cont. rating) 11 kW (15 hp)/11 kW (15 hp)
Electrical power requirement (40% ED (30 min. rating)/cont. rating) 29.03 kVA/29.03 kVACoolant Coolant tank capacity 220 L (58 gal) Machine size Height 2720 mm (107.09")
Width 2350 mm (92.52")Length 2962 mm (116.61")Machine weight 10000 kg (22046 lbs)
VARIAXIS C-600
Table ø600 mm × 500 mm (ø23.62” × 19.69") tapped table ●ø600 mm × 500 mm (ø23.62” × 19.69") T-slot table ○
Machine Work light ●12000 rpm ●15000 rpm high-torque spindle ○18000 rpm ○20000 rpm ○
Factory Automation Automatic tool length measurement (RENISHAW PRIMOS LTS) ○Laser tool measurement system ○30-tool magazine ●60-tool magazine ○90-tool magazine ○120-tool magazine ○Work measurement printout (printer not included) ○Absolute positioning system ●Remote manual pulse generator ○Front door automatic open/close ○Right side door automatic open/close (Not available with 2PC) ○Automatic power ON/OFF + warm-up operation ●Operation end buzzer ○Status light (3 colors) ○2-pallet changer ○Wireless touch probe RMP600 ○Preparation for hydraulic fixtures ○
Safety Equipment Operator door interlock ●High Accuracy Ai Thermal Shield ●
MAZA-CHECK (software, reference sphere)*1 ●Ball screw core cooling (X, Y, Z axis) ●Scale feedback (X, Y, Z axis) ○Scale feedback (B, C axis) ○
Coolant/ChipDisposal
Coolant system ●Work air blast ○Oil skimmer ○Mist collector ○Coolant temperature control ○Hand-held coolant nozzle ○Coolant through spindle system (0.5 MPa (73 psi)) ○Work washing coolant ○High-pressure coolant through spindle (1.5 MPa (218 psi)) ○SUPERFLOW coolant system ○Flood coolant (0.4 MPa (58 psi)) (30 L/min (7.92 gal/min) ●Coolant through spindle pressure switch ○Coolant tank with secondary filter ○Chip conveyor (Hinge) side discharge ○Chip conveyor (drum type) side discharge ○Chip conveyor (Hinge) rear discharge ○Chip conveyor (drum type) rear discharge ○Chip bucket (swing type) ○Chip bucket (fixed type) ○
Tooling Pull stud bolt ○Others Manual (CD) ●
Additional manuals ○MAZATROL SmoothAi second monitor ○
■Standard and Optional Equipment
●: Standard ○: Option
*1MAZA-CHECK requires RMP600 wireless touch probe.
■Standard Machine Specifications
■Machine Dimensions
Unit: mm (inch)
2350 (92.52")
2518 (99.13")
3424(134.80")
2962(116.61")
2600
(102
.36"
)
3039
(119
.65"
)
10 11
VARIAXIS C-600 20.02.0 G 99J289120E0
EA
Specifications are subject to change without notice.This product is subject to all applicable export controllaws and regulations.The accuracy data and other data presented in thiscatalogue were obtained under specific conditions.They may not be duplicated under different conditions.(room temperature, workpiece materials, tool material,cutting conditions, etc.)Unauthorized copying of this catalogue is prohibited.
1-131 Takeda, Oguchi-cho, Niwa-gun, Aichi-pref., Japan
TEL : +(81)587-95-1131
YAMAZAKI MAZAK CORPORATION
www.mazak.com
Va
ria
xis
C-6
00