Mechanic’sMarketplace
Pricing Good Through September 30, 2017
Vertical Lift Chemical Pump• Nylon Body, Stainless Steel Shaft and Polytetrafluoroethylene (PTFE) Seals• For use with 55 gallon drums• Delivers up to 14 oz. per stroke• For use with Antifreeze, Detergent, DEF, Lacquer, Thinners, Acetone, etc.• Not for use with gasoline, diesel, fuel oil, kerosene, etc.• 1 Year Warranty
KTI72202
Plastic Rotary Transfer Pump• Glass filled, Polypropylene (PP) body with Ryton Rotor and Vanes and Viton seals• For use with 15 - 55 gallon drums• Delivers up to 1.30 gallons per 20 turns• Includes drum bung for use with both metal and plastic drums• For use with Chemicals, DEF, Antifreeze, Detergents, etc. Not for use with gasoline, diesel, fuel oil, kerosene, etc.• 1 Year Warranty
KTI72204
5 Piece Drift Brass Punch Set• Includes 5 punches all 5-3/4” (147 mm) long, with the following punch diameters:
1/4” (6 mm), 3/8” (10 mm), 1/2” (12 mm), 5/8” (16 mm) & 3/4” (19 mm)• All five punches come in one pouch • 1 Year Warranty
KTI72970
Battery Powered 19.2V Cordless Grease Gun• Includes two 1.5Ah Lithium Ion 19.2V battery packs, cUL listed 110V AC one hour quick
charger, 30” high pressure grease hose and quick lock coupler• Develops up to 6000 PSI• Delivers up to 3 oz / minute. Dispenses up to 6 grease cartridges with a single charge• 3 Way loading: 14 oz cartridge, bulk and suction fill• You can use Ni Cd 18.5V (peak voltage is 19.2V) or Li Ion 19.2V battery with this product.
Both are compatible, but you will need the appropriate charger• 90 Day Warranty
KTI73970
2 Piece Universal Oil Funnel• Universal funnel and an adjustable plier clamp• Fits on all Filler Necks with opening between 1” to 3.14”• No Spill – No Mess & Hands Free Design: Funnel sits tight on varying openings
allowing the user hands free operation and prevents any mess due to fluid spill• Interchangeable Funnel: Plastic funnel easily slides out and can be replaced by
any other funnel by adjustment of the clamp ring• 1 Year Warranty
KTI74620
Professional Tire Inflator Gauge• Professional gauge for measuring, inflating and deflating vehicle tires• Aluminium die cast heavy duty body• Fitted with 2-1/2” mechanical pressure gauge with protective shroud,
24” long flexible hose and rigid steel extension with grip, built in swivel and dual chuck for truck tires
• Inlet 1/4” NPT, maximum pressure 230 PSI• Super accurate to within +/- 1.6%• 1 Year Repair or Replace Warranty
KTI89005
NEW
NEW
NEW
NEW
NEW
NEW
FLUID PUMPS
Siphon PumpMulti-use pump transfers most liquids. Also pumps air for inflatables. Use for changing oil, siphoning gas, inflating sports balls and beach toys. Includes two 51” siphon hoses, 35” dipstick hose and adapter (for changing oil) and 17” air pressure hose.Warranty information: 90-day warranty.
KTI72250 2 Piece Filter Regulator & Lubricator• Miniature Filter regulator and lubricator
2 piece space saving combination• 40 micron sintered bronze filter element,
polycarbonate bowl with metal bowl guard• 1/4” NPT, maxium flow 18 CFM (500 LPM)• Semi automatic night time drain• Pressure range: 7-145 PSI• 1-Year Warranty
KTI89195
Hand Rotary Barrel PumpHeavy Duty capacity. Cast iron head with steel inlet/outlet tubing. 2 inch bung adapter. Ideal for heavy oil, machine oil and non-corrosive liquids. Pumps one gallon per 14 revolutions.90 Day Warranty
KTI72200
Lever Type Barrel Pump• Telescopic suction tube for pumping contents from 15 to 55 gallon drums. • Includes brass piston ring. • Pumps agricultural and industrial chemicals, and other non-corrosive liquids. • Cushioned vinyl grip handle. • Removable threaded spout. • Dispenses approximately 300cc of liquid per stroke• 90 Day Warranty
KTI72205
00035
07740
Heat Shrink Tube AssortmentsAllows protection and insulation of automotive wires, electrical and mechanical components from heat, moisture, and corrosion. Quick and simple to shrink by heat gun.
00033
00034
Part No. Description Shrink Ratio Length Diameters
KTI00033 216 Piece Set - Black/Red 2:1 45 & 75mm 2.5, 3.5, 4.5, 6, 10mm
KTI00034 105 Pc Double Wall Set - Blk/Red 3:1 45 & 75mm 3.2, 4.8, 6.4, 9.5, 12.7mm
KTI00035 85 Piece Set - Black only 2:1 6 inch 1/8”, 3/16”, 1/4”, 3/8”, 1/2”
KTI07740 235 Piece Set - Assorted colors 2:1 6 inch 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 5/8, 3/4’
Pyro Torch ShieldSize: 10” X 18”. Protect surfaces from sparks or open flame from gas torches. Will withstand even the extreme heat of acetylene torches.
KTI70440
TORCHES
VISESSteel Bench Vises• Lockable swivel bases• 10 year warranty
Part No. Description
KTI64105 5” Wide Bench Vise Usable Jaw Opening 5-1/4”
KTI64106 6” Wide Bench Vise Usable Jaw Opening 6-1/6”
KTI64108 8” Wide Bench Vise Usable Jaw Opening 8-1/2”
FILTER PLIERS
Oil Filter Wrench Toyota/Lexus• Fits Toyota, Lexus, Scion, Honda and Nissan filters• Aluminum oil filter wrench• 64.5mm diameter with 14 flutes• Use with 3/8” square drive
KTI73630
Adjustable Oil Filter PliersFor removing spin-on filters with diameters from 2-1/4” to 6”. Self adjusting spring action. Made in USA.
KTI73620
Truck Filter PliersCapable of removing all agricultural and construction equipment and automotive canister type filters. Ideal for loosening over-tightened or seized filters. 17” extended reach increases leverage. Spring loaded pliers work on auto filters as well as Cummins diesel filters. Range: 4” to 7” diameter.
KTI73621
17 Piece Master Oil Filter Wrench Set• 3/8” drive cap oil filter wrenches• Fits 95% of domestic and import automotive applications• Complete set comes in a handy 10” x 13” plastic case• Includes: 80mm 15 flutes, 82mm 15 flutes, 86mm 14 flutes,
65/67mm 14 flutes, 68mm 14 flutes, 73/74mm 14 flutes, 64/65mm 14 flutes, 74/76mm 15 flutes, 76mm 14 flutes, 93mm 15 flutes, 76mm 30 flutes, 86mm 16 flutes, 88.4mm 15 flutes, 93mm 36 flutes, 93mm 45 flutes, 96mm 18 flutes, 100mm 15 flutes.
KTI73635
FILTER WRENCHES
TPMS Tool for Sensor Activation, Programming and ECU Reset• 98.6% TPMS sensor coverage• Programs all major leading aftermarket TPMS sensor brands• Vehicle make, model, year lookup and relearn procedures.• Activates and reads 100% TPMS sensors• Displays all sensor data in seconds: ID, tire pressure,
tire temperature, battery status, etc.• 1 year FREE updates• 1 year warranty
KTITPMSPRO
KTITPMSOBD• Includes KTI TPMS PRO, OBD2 module and softshell case
TPMS Sensor Activation and Programming Tool• Vehicle make, model, year look-up• Activates and reads 100% TPMS sensors• Programs all leading aftermarket TPMS sensors• 1 year FREE updates• 1 year warranty
KTITPMSTOOL
NEW
NEW
$450.69$743.64
$292.95
$33.50
$339.99
$38.99
$93.50
$51.95
$38.99
KTISS-KTIDLR-9
$15.79
$74.99$71.25
$39.16
$12.59$31.99$36.89$20.99
$13.85
SPECIAL
$153.41
$190.50
$249.32
SPECIAL
$16.99
$26.50
$43.90
$59.99
Normally $507.94
Normally $838.10
Normally $330.16
Normally $34.64
Normally $359.95
Normally $43.30
Normally $103.93
Normally $54.56
Normally $41.86
Normally $17.10
Normally $83.33Normally $76.99
Normally $44.86
$13.39
$34.99
$41.86
$22.99
Normally
Normally $15.10
$178.55
$221.89
$290.68
Normally
Normally $18.99
Normally $31.17
Normally $69.95
Normally $46.41
24121
BALL JOINT & TIE ROD TOOLSBall Joint Service Tool and Master Adapter Set• For removing and replacing ball joints• Remove and replace universal joints by using the C-Frame press• Includes one live center forcing screw, receiver tubes, and removing/
installing adapters• Works on most Ford, GM, and Dodge 2 and 4 wheel drive pickups,
vans and sport utility vehicles through 1997
KTI71556
BIT SETS
Impact Socket Sets• Chrome Moly Steel construction• Thin wall impact quality sockets• Ideal for rugged, professional, environments• Laser engraved for quick identification• Heat treated 6 Point impact sockets• Blow molded cases, except KTI34200 and KTI34201 are shipped loose
3820233101
IMPACT SOCKET SETS
Part No. Description Pieces Drive Sizes
KTI32100 Fractional Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”
KTI32200 Fractional DEEP Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”
KTI37100 Metric Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm
KTI37200 Metric DEEP Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm
KTI33100 Fractional Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”
KTI33101 Fractional Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”
KTI33200 Fractional DEEP Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”
KTI33202 Fractional DEEP Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”
KTI38100 Metric Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm
KTI38101 Metric Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm
KTI38200 Metric DEEP Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm
KTI38201 Metric DEEP Impact Socket Set 9 Piece 1/2” Drive 22mm to 30mm
KTI38202 Metric DEEP Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm
KTI34100 Fractional Impact Socket Set, 8 Piece 3/4” Drive 1” to 1-1/2”
KTI34200 Fractional DEEP Impact Set, no case 8 Piece 3/4” Drive 1” to 1-1/2”
7 Piece 1/2” Drive Thin Wall Protective Socket Set• Sockets made of chrome moly steel• Complete set comes in a handy plastic case• Includes: 17mm blue , 19mm gold , 21mm red , 13/16” purple,
7/8” green , 1” titanium color, and 1-1/16” black
KTI33300
22801
22870
21500
22601
SOCKET SETS
Socket Only SetsAvailable in fractional and metric sizes short and deep lengths. 6 and 12 point sockets.
Part No. Description Pieces Points Sizes
KTI26100 1/4” Drive Metric Socket Set 8 Piece 6 Point 6mm to 13mm
KTI26200 1/4” Drive Metric DEEP Socket Set 8 Piece 6 Point 6mm to 13mm
KTI27401 3/8” Drive Metric DEEP Socket Set 15 Piece 12 Point 7mm to 21mm
KTI27501 3/8” Drive Metric Socket Set 15 Piece 12 Point 7mm to 21mm
KTI22100 3/8” Drive Fractional Socket Set, 10 Piece 6 Point 5/16” to 7/8”
KTI22201 3/8” Drive Fractional DEEP Socket Set, 9 Piece 6 Point 3/8” to 7/8”
KTI27101 3/8” Drive Metric Socket Set, 13 Piece 6 Point 7mm to 19mm
KTI27201 3/8” Drive Metric DEEP Socket Set, 9 Piece 6 Point 10mm to 18mm
KTI22401 3/8” Drive Fractional DEEP Socket Set 13 Piece 12 Point 1/4” to 1”
KTI22501 3/8” Drive Fractional Short Socket Set 13 Piece 12 Point 1/4” to 1”
KTI23110 1/2” Drive Fractional Shallow Socket Set, 13 Piece 6 Point 7/16” to 1-1/4”
KTI23200 1/2” Drive Fractional DEEP Socket Set, 8 Piece 6 Point 1/2” to 15/16”
KTI28100 1/2” Drive Metric Shallow Socket Set, 14 Piece 6 Point 15mm to 28mm
KTI28200 1/2” Drive Metric DEEP Socket Set, 10 Piece 6 Point 15mm to 24mm
Part No. Description Pieces Drive
KTI21500 Tamperproof Torx® Set. MADE IN USA. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T50, T55 plus 2 bit holders
KTI22601 Torx® Bit Set. MADE IN USA. 12 Piece 1/4”, 3/8”, 1/2” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55 1/2” Drive: T60
KTI22870 External Torq Socket Set. 10 Piece 1/4”, 3/8” Drive 1/4” Drive: E4, E5, E6, E7, E8. 3/8” Drive: E10, E12, E14, E16, E18
KTI22801 Torq Socket Set. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55, T60
KTI22671 External Scoket Set . MADE IN USA. 10 Piece 1/4”, 3/8” Drive
1/4” drive: E-5, E-6, E7 and E8; 3/8” drive: E-10, E-12, E-14, E-16, E-18, E-20.
SOCKET ONLY SETS
Part No. Description Pieces Points Metric Sizes Fractional Sizes Extension
KTI21044 1/4” Drive Fractional & Metric Socket Set (Standard & Deep) 44 Piece 6 Point 6mm to 13mm 3/16” to 9/16 2” & 6”
KTI22047 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 6 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”
KTI22547 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 12 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”
KTI24121 3/4” Drive Fractional Socket Set (Standard) 20 Piece 6 point - 3/4” to 2” 4”, 8” & T-Handle Driver
22671
Socket Holders• 1/4”, 3/8” and 1/2” drive socket trays• Impact resistant ABS plastic• Available in grey or red • Sold in sets or individually
Part No. Description
KTI72470 3 Piece SAE, Red
KTI72471 1/4” Drive SAE, Red
KTI72472 3/8” Drive SAE, Red
KTI72473 1/2” Drive SAE, Red
KTI72475 3 Piece Metric, Gray
KTI72476 1/4” Drive Metric, Gray
KTI72477 3/8” Drive Metric, Gray
KTI72478 1/2” Drive Metric, Gray
21044
22047
22547
ORGANIZERS
LUBE19.2V Electric Rechargeable Drum Pump• Compact & lightweight polyacetal body• Telescopic pump tube for use with 55 gal. (205 Litre) drums as well as 275-330 gal. (1000 to 1250 Litre) IBC’s• Built-in 2” bung & an additional bung converter (2.5” x 5 buttress) for use with plastic drums & IBC’s• Delivers up to 28 lpm (7.4 gpm) on a single battery charge• Covered by a 1-year warranty• Includes 19.2V Ni Cd rechargeable battery & quick battery charger• Designed for pumping DEF, diesel, antifreeze, water, detergents,
herbicides, pesticides, kerosene, light oils etc.
KTI72215
Standard Lever Grease Gun 14oz• 6,000 PSI• Complete with 6” steel extension & coupler• 3-Way loading 14 oz cartridge, bulk and suction fill• 1-Year Warranty
KTI73905
Heavy Duty Lever Grease Gun 14 oz• Heavy duty aluminum die cast grease gun
head fitted with bulk loaded & air release• 3-way loading: 14 oz cartridge, bulk and suction fill• Grease gun handle fitted with rubber grip• Develops up to 10,000 PSI with built-in variable stroke• Supplied complete with 6” steel extension & coupler• 1-Year Warranty
KTI73942
Heavy Duty Pistol Grip Grease Gun 14 oz• Die cast aluminum head fitted with steel block nut• Complete with 18” flexible hose extension & coupler• 3-way loading: 14 oz cartridge, bulk and suction fill• 5,000 PSI • 1-Year Warranty
KTI73933
Suction Gun with 12” Vinyl Hose• Transfer gun designed to get gear oils both into and
out of gear boxes, transfer cases and differentials• Capacity 16 oz • 1-Year Warranty
KTI73919
2
Lever Action Bucket Pump 5 Gallon Pail• Lever action bucket pump fits 5
gallon pails• Comes complete with 12” drum
cover and 4’ PVC hose with steel spout
• Designed for transferring transmis-sion differentials & heavier oils
• Delivers 2.14 oz (60 ml) per stroke• 1-Year Warranty
KTI73993
Lever Transfer Pump 15-55 Gal. Drums• Lever transfer pump for 15-55 gallon (50-205 liter) drums• For use with DEF, antifreeze, detergents, windshield fluids, heavy oils, etc• Delivers up to 1 pint per stroke• 1-Year Warranty
KTI72210
Accurately torque wheel lugs to manufacturers recommendations
Use with 1/2” Dr. Impact Sockets (Not included)
10 Piece O.E. Torque Limiting Socket SetCovers a completely different list of vehicles from Accutorq’s original 10 piece kit. Includes Orange, Light Blue, Off-White, Mud, Light Tan, Light Yellow, Red-Orange, Quartz Gray, Charcoal, and Light Purple plus case, application chart and instruction sheet. ISO 9001 Certified.
ACC10-0323
10 Piece Original Torque Limiting Socket SetCovers most cars and light trucks. Includes all Green, Red, Yellow, Blue, Gray, Light Brown, Brown, White, Turquoise, and Light Green, plus case, application chart and instruction sheet. ISO 9001 Certified. Lifetime guarantee.
ACC10-0322
7 Piece Torque Extension Set• 1/2” Drive torque extension set • Set includes: 55 ft/lb red color, 65 ft/lb yellow color, 80ft/lb green color, 100 ft/lb light blue color, 120 ft/lb white color, 140 ft/lb black color, 175ft/lb orange color.
KTI33350
TORQUE LIMITING SOCKETS
4 Piece Heavy Duty Truck Torque Limiting SetsFor large trucks and heavy equipment. Includes Red (1-1/4” x 250 ft/lbs), Brown (33mm x 475 ft/lbs), Black (1-1/2” x 475 ft/lbs), and Yellow (13/16” square x 475 ft/lbs). Available in 3/4” and 1” Drive.
ACC20-4100 3/4” DriveACC20-4000 1” Drive
TESTER AND BLEED
Automotive Tester and Bleed Kit• Handy for troubleshooting and tune-ups• Dial gauge indicates pressure in inches and centimeters of mercury • Perform hundreds of automotive diagnostic tests including on fuel petcocks, carburetors & vacuum advance • One person brake bleeding kit: bleeds brakes, clutches or other hydraulic systems• Bleeding kit includes fittings, hose
and 114 page instruction manual
KTI72261
$179.99
$29.89
$39.50
$24.99
$20.95
$35.20
$13.99$19.89$45.18$31.05$21.66$29.99$26.54$30.79$42.99$29.50$49.99$42.50$59.64$67.62
$84.69
$27.84$42.95$29.31$44.35$59.84$122.10$98.57$192.24$50.84$140.68$77.78$80.28$227.44$105.99$153.63
$90.42$127.81$127.20$229.99
$24.95$7.99$7.99$9.09$24.95$7.99$7.99$9.07
$392.69
$19.29
$24.99
$27.99
$14.69
$49.99
$99.99
SPECIAL
SPECIAL
SPECIAL
SPECIAL
SPECIAL
$358.93
$358.93
$119.99
$527.26$527.26
SPECIAL
$44.84
$29.85
$49.35
$32.97
$46.68
$64.89
$140.25
$107.69
$222.84
$57.93
$155.11
$90.51
$92.11
$262.80
$124.02
$176.40
Normally $89.95
Normally
$32.33
$42.94
$32.59
$28.20
$38.14
$16.75
$23.83
$51.31
$34.56
$24.45
$33.07
$29.43
$34.09
$48.72
$33.68
$59.08
$50.05
$66.48
$76.57
$102.03
$144.26
$144.26
$300.75
Normally
Normally
Normally
Normally $194.50
Normally
$27.35
$8.69
$8.69
$9.99
$27.35
$8.69
$8.69
$9.99
Normally $21.28
Normally $27.96
Normally $30.30
Normally $15.87
Normally $437.32
Normally $54.11
Normally $108.23
Normally
Normally $405.46
Normally $405.47
Normally $142.99
$606.23
$606.23
Normally $51.40
BluBird Oil Shield Air Hoses, Yellow• BluBird Oil Shield 300 PSI 100% rubber air hose• Ultra lightweight, extreme durability resists abrasion and ultra high strength exceeds RMA IP-2• Stays flexible in extreme conditions from -30 to 190 degrees fahrenheit• Oil reistance core tube and cover meets RMA Class A oil resistance• Four finger grip bend resrictor for easy use and better durability• Color: Yellow• 3 year warranty
AvaGard Rubber Air Hoses, Red• Avagard premium 300 PSI professional rubber air hose• Very light, super strong and super agile• Stays flexible in extreme conditions from -40 to 180 degrees fahrenheit• Oil resistant core tube meets RMA Class C oil resistance and ozone resistant
cover resists extreme weather, abrasions & kinks• Ultimate durability • Color: Red • 5 year warranty
Rubber Air HoseSolid brass end MNPT fittings. Protective PVC bend restrictor ends. Abrasion-resistant rubber outer jacket. 300 PSI working pressure.
3 Foot Rubber Whip Hose3/8” ID rubber hose with 1/4” NPT male brass fittings. 300 PSI. Color: RED.
KTI72000
Swivel End Whip Hoses3/8” ID rubber hose with 1/4” MNPT brass swivel on one end and 1/4” NPT male brass fitting on the other. 300 PSI. Color: RED. Available in 3 and 6 foot lengths.
KTI72007 3 Foot
KTI72008 6 Foot
Part No. Description Size Fittings
KTI72001 Rubber Air Hose - Red 3/8” x 25 Foot 1/4” MNPT
KTI72002 Rubber Air Hose - Red 3/8” x 50 Foot 1/4” MNPT
KTI72003 Rubber Air Hose - Red 1/2” x 25 Foot 3/8” MNPT
KTI72004 Rubber Air Hose - Red 1/2” x 50 Foot 3/8” MNPT
KTI72005 Rubber Air Hose - Red 1/2” x 25 Foot 1/2” MNPT
KTI72006 Rubber Air Hose - Red 1/2” x 50 Foot 1/2” MNPT
KTI72010 Rubber Air Hose - Yellow 3/8” x 25 Foot 1/4” MNPT
KTI72011 Rubber Air Hose - Yellow 3/8” x 35 Foot 1/4” MNPT
KTI72012 Rubber Air Hose - Yellow 3/8” x 50 Foot 1/4” MNPT
KTI72013 1/4” x 50’ BluBird Hose 1/4” NPT
KTI72014 3/8” x 25’ BluBird Hose 1/4” NPT
KTI72015 3/8” x 50’ BluBird Hose 1/4” NPT
KTI72016 1/2” x 50’ BluBird Hose 1/2” NPT
KTI72036 3/8” x 100’ BluBird Hose 1/4” MNPT
KTI72037 1/2” x 25’ BluBird Hose 1/2” MNPT
KTI72038 1/2” x 100’ BluBird Hose 1/2” MNPT
BluBird Rubber Air Hoses• 100% rubber air hoses• Heavy duty, ultra light weight and super strong• 300 PSI, NPT or MNPT fittings with brass ferrules and a bend restrictor• Stays flexible in temperatures from -50 degree to 180 degree Fahrenheit• Ozone and abrasion resistant EPDM blended cover
BluBird Air Hose Reels• 300 PSI retractable rubber air hose reel with lead in hose and 1/4” NPT fittings• Smooth auto-rewind with locking 12 point ratchet gearing system• Heavy duty steel construction with powder coated, corrosion proof finish• Horizontal and vertical wall mount options with adjustable guide arm• 2-Year Warranty on hose reel and 10-Year Warranty on attached
hose to any manufacturing defects
KTI71001 - 3/8” x 50’KTI71002 - 1/2” x 50’
KTI72020 - 3/8” x 25’ - 1/4” NPT
KTI72021 - 3/8” x 50’ - 1/4” NPT
KTI72022 - 1/2” x 25’ - 1/2” NPT
KTI72023 - 1/2” x 50’ - 1/2” NPT
KTI72017 - 3/8” x 35’ - 1/4” NPT
KTI72018 - 3/8” x 50’ - 1/4” NPT
KTI72019 - 1/2” x 50’ - 1/2” NPT
10 YEAR WARRANTY
Hose Reel 3/8” x 50 Foot• All steel contruction • Slotted mounting base - easy install • Spring powered auto recoil • 8 position ratchet system• 50 foot red rubber air hose 3/8” I.D. • PVC bend restrictor• Solid brass ferrule, 1/4” male NPT • 300 PSI
KTI71000 Reinforced side plates are powder coated to resist corrosion
1 YEAR WARRANTY
1 YEAR WARRANTY
1 YEAR WARRANTY
1 YEAR WARRANTY
1 YEAR WARRANTY
Mini Die Grinder25,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.
KTI87125
Die Grinder22,000 rpm. 1/4” Collet. 1/2 HP motor, built-in power regulator, variable speed throttle. 5-1/2” over-all length.
KTI87132
Gearless Angle Die Grinder25,000 Rpms. 1/4” collet excepts 1/8”, 1/4”, 3mm and 6mm shanks. Lightweight housing reduces vibration.Overall length: 6-1/4 inches.
KTI87128
Mini Angle Die Grinder18,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.
KTI87126
AIR TOOLS
KTI71010 Rubber Tip 1/2”
KTI71011 Standard
KTI71012 High Flow Safety
KTI71013 Soft Rubber Star Tip
KTI71015 Kit with 4 Popular Field Interchangeable Tips
KTI71016 Kit with 7 Popular Field Interchangeable Tips
Includes popular field interchangeable tips!
KTI71010 KTI71012KTI71011
KTI71013
KTI71015
KTI71016
Air Blow Guns • Air blow gun with heavy duty aluminium die cast body• Exclusive Venturi mechanism combines ambient air with compressed air boosting output by 15%• Output air discharge can be varied by the pistol handle • Inlet threaded 1/4” NPT (F)• Conforms to OSHA standard for both safety and noise • Covered by a 1-year warranty
Air Hydraulic Rivet Gun 3/16• Rugged tool sets rivets up to 3/16” OD• Includes 4 standard-size nose pieces: 3/32”, 1/8”, 5/32” and 3/16”• Air relief prevents overloading and increase life• Specifications: 75-80 recommended psi; 3/16” capacity;
4.5 CFM average air consumption
KTI89110
Air Hydraulic Rivet Gun 1/4• Rugged tool sets rivets up to 1/4” OD• Includes 6 standard-size nose pieces: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”• Includes complete head assembly (jaws and pusher) for 3/32” through 3/16” steel rivets• Specifications: 75-80 recommended psi; 1/4”” capacity; 4.5” lbs.;
4.5 CFM average air consumption
KTI89115
AIR HOSE
3
Heavy duty industrial quality 1/2” HP 1/4” Straight Die Grinder• Collet Size: 3-6mm (1/8”-1/4”), Free Speed: 22,000 rpm’s,
Air Inlet: 1/4”, Suggested Air Pressure: 90psi, Average Air Consumption: 12cfm
KTI87124
Heavy Duty industrial Quality 1/2” HP 1/4” Angle Die Grinder• Collet Size: 3-6mm (1/8”-1/4”), Free Speed: 22,000 rpm’s,
Air Inlet: 1/4”, Suggested Air Pressure: 90psi, Average Air Consumption: 12cfm
KTI87134
TOW STRAPS & TIE DOWNS
Heavy Duty Tow Straps with Loop EndsHeavy duty nylon web construction with reinforced stitching. For your safety recommended working load should not exceed 1/3 of maximum rated load.
Part No. Description Size Capacity
KTI73810 Tow Strap w/ Loop Ends 2” Wide x 20 Feet Long 15,000 lb. max
KTI73811 Tow Strap w/ Loop Ends 3” Wide x 20 Feet Long 22,500 lb. max
KTI73812 Tow Strap w/ Loop Ends 3” Wide x 30 Feet Long 30,000 lb. max
KTI73813 Tow Strap w/ Loop Ends 4” Wide x 30 Feet Long 40,000 lb. max
KTI73814 Tow Strap w/ Loop Ends 6” Wide x 30 Feet Long 60,000 lb. max
KTI73813
KTI73814
Recovery Tow Ropes• Double braided nylon rope is extremely strong and flexible• Durable, UV resistant, waterproof polymer coating is soaked deep into the rope fibers• High elasticity is ideal for off-road recovery and snatching applications• Rubber coated eye tips provide extra protection and maximum grip• Includes black mesh vented bag• Covered by 1 year warranty
KTI73818
KTI73819KTI73822
KTI73823
KTI73824
KTI73825
KTI73810KTI73811KTI73812
Part # Eye Color Size Rating (lbs)
KTI73818 Yellow 1/2” x 20’ 7,400
KTI73819 Black 3/4” x 20’ 19,000
KTI73822 Blue 7/8” x 20’ 28,600
KTI73823 Red 7/8” x 30’ 28,600
KTI73824 Orange 1-1/4” x 30’ 52,300
KTI73825 Green 1-1/2” x 30’ 74,000
Big Pack Abrasive Cut-Off Discs
70013
CUT-OFF DISCS71303
Abrasive Cut-Off Discs25,000 Rpm maximum speed. Cut mufflers, light metals, fiberglass & more. 3 inch diameter discs with 3/8 inch hole for arbor.
Part No. Description
KTI71301 25 Pack Cut-Off Discs 3” x 1/16” x 3/8”
KTI71300 50 Pack Cut-Off Discs 3” x 1/16” x 3/8”
Part No. Description
KTI71303 6 Pack Cut-Off Discs 3” x 1/32” x 3/8”
KTI71306 6 Pack Cut-Off Discs 3” x 1/16” x 3/8”
KTI70013 Drill Arbor for Cut-Off Discs
Heavy Duty Tow Straps with Hook EndsHeavy duty nylon web construction with reinforced stitching and forged hook ends. For your safety recommended working load should not exceed 1/3 of maximum rated load.Part No. Description Size Capacity
KTI73801 Tow Strap w/ Forged Hooks 2” Wide x 10 Feet Long 7,000 lb. max
KTI73802 Tow Strap w/ Forged Hooks 2” Wide x 15 Feet Long 10,000 lb. max
KTI73803 Tow Strap w/ Forged Hooks 2” Wide x 25 Feet Long 10,000 lb. max
KTI73801 KTI73802KTI73803
$6.09 $11.74
$14.21
$19.57$35.29$28.23$51.18$29.97$53.58$22.00$31.99$38.71
$26.50$22.49$41.69$46.50$84.55$29.35$115.22
$20.97$38.88$29.37$53.99
$41.25$58.25$77.76
$152.99$168.75
$139.99
$45.54
$46.99 $82.01
$86.38
$10.31
$10.31
$17.51
$9.00
$12.44
$27.00
$114.62
$257.69
$61.99$39.99
SPECIAL
SPECIAL
SPECIAL
SPECIAL
SPECIAL
$454.80
$179.44
$105.37
$334.06
$134.43
$72.43
$47.25$73.33$86.32$105.81$252.39
Special
$33.73
$65.15
$8.95
$8.95
$5.62
SPECIALSPECIAL
$16.99$28.99$37.50
Special Normally
$22.69
$39.99
$32.49
$58.95
$33.70
$59.99
$25.20
$34.49
$44.29
Normally $6.89Normally $13.29
Normally $15.99
Normally
$28.95
$24.20
$44.95
$49.99
$98.47
$34.18
$134.18
$23.45
$43.40
$32.85
$60.35
$46.18
$65.10
$86.90
$165.29
$177.50
Normally
Normally
Normally
Normally
Normally $159.95
Normally $52.41
Normally $51.99Normally $99.17
Normally $103.62
Normally $11.48
Normally $11.48
Normally $19.50
Normally $10.02
Normally $13.85
Normally $30.07
Normally $136.98
Normally $308.22
Normally $71.08Normally $46.59
$50.82
$80.88
$95.21
$116.64
$277.13
Normally $475.00
Normally $188.88
Normally $110.99
Normally $351.69
Normally $141.95
Normally $76.99
Special Normally
$9.51
$9.51
$6.07
Normally$38.18
$74.87
Normally
$18.22
$31.42
$40.23
24 SMD LED Rechargeable Folding Underhood Worklight• 24 LED SMD worklight with 7.4 volt / 2000 mAh Li battery• 6 Hour charge time • 3.5 hour approximate run time• Aluminum and ABS housing• Telescopic ends slide to a maximum of 74.75” • Two soft rubber covered brackets allow attaching the light to work area• Hi / Low / Off operation modes • AC & DC chargers included• Full extension length: 50.375” • Folded length: 26.875”
KTI73386
Click-Style Torque WrenchesThese torque wrenches are extremely accurate and easy-to-use. Simply adjust the torque specification on the wrench by releasing the red knob and turning the handle of the torque wrench while holding the shaft of the torque wrench. Features a ball detent socket retainer with push-button release for quick socket changes. Work clockwise and counter-clockwise.
Accurate easy-to-use adjustment
Locking Ring ensures accuracy
Push-Button Release
Use with 1/2” Dr. Ratchets (Not included)
Digital Torque Adaptor 1/2” Drive• Use digital torque adaptor with 1/2” drive ratchet• Static torque measurement• Three standard functions: torque setting, measurement
setting and mode setting• Operates is clockwise and counter-clockwise directions• Torque range is 29.5 - 147.5 ft-lbs
KTI72138
Part No. Description Torque Range Over-all Length
KTI72140 3/8” Drive Click-Style Torque Wrench 50-250 in/lbs. 8-3/4”
KTI72141 1/2” Drive Click-Style Torque Wrench 30-150 ft/lbs. 18-3/4”
KTI72142 1/2” Drive Click-Style Torque Wrench 30-250 ft/lbs. 21-1/2”
Digital Torque Wrenches• 72 Teeth• Comes in black blow-molded storage case
Part No. Description Torque Range Over-all Length
KTI72133 3/8” Drive Digital Torque Wrench 14.5-73.8 in/lbs. 15”
KTI72134 1/2” Drive Digital Torque Wrench 29.5-147.5 ft/lbs. 19.375”
KTI72135 1/2” Drive Digital Torque Wrench 25-250 ft/lbs. 22.250”
TORQUE ADAPTER
30 Foot Retractable Cord Reel with 3-Outlet ConnectorExtension reel features oil and water resistant cord, retractable reel, metal housing and circuit breaker protection. 16/3 SJTW cord with indoor tri-tap. 10A/125V, 1250W.
KTI73340
48 LED Worklight • Super bright 48 element LED worklight • 25 foot 16/3 SJT power cord • 15 AMP outlet in handle • Clamped magnet attaches to center. • Two swivel hooks that fold down.
KTI73397
Rechargeable 3W COB LED• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • Charge time: 5 hours • Run-time: 2 hours • ABS and rubberized housing • Magnet on the back side and a clip for hanging • AC & DC chargers included
KTI73388
12 SMD LED Rechargeable Worklight • Rechargeable 12 SMD LED worklight. • ABS and rubberized housing• Magnet on the back side• Rotating hook on the top. • Hi / Low / Off switch.
KTI73399
Rechargeable 3W COB LED with Pivot Head• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • 5 hour charging time • 2 hour run-time • ABS and rubberized housing • Super strong magnetic base• Rotating hook at the top that can be turned down • Light head pivots 80 degrees from the base and rotates 180 degrees• AC & DC chargers included
KTI73387
Aluminum 16 LED Flashlight• 16 LED (96 lumens) flashlight• Aerospace grade aluminum body• Rubber grip handle• Belt holster included• 3 - AAA batteries included
KTI73396
13W Fluorescent Angle Light, Reel has 30’ Retractable Cord• Retractaable SJT cable, 16/3 AWG, 30 foot cord• 9 amp, 1125 watt, 125 volt cable reel made of metal• 13 Watt bulb• On/Off switch and outlet in handle
KTI73315
EXTENSION CORDS
30 LED SMD Retrofit Light• Trouble Light 30 LED SMD Retrofit• Twist on module converts an incandescent trouble light into a LED • 30 high powered SMD LED (300 lumens)• A rubber bumper protects the unit • Folding hanging hook fits into the head
KTI73379
25 Foot Incandescent Trouble Lights• Metal cage guard• Use with up to a 75 Watt bulb (not included)
KTI7335825 Foot, 18/3 cord.
KTI7336025 Foot, 16/3 cord.
73312
73311
Fluorescent Angle Lights• Circuit breaker protection• On/Off switch and grounded outlet in handle • Two adjustable hanging hooks that swivel 360°• Magnetic clip for convenient under hood use• 16/3 grounded power cords
KTI73311• 25 Foot 16/3 cord• 13 Watt• Single bulb• On/Off switch
KTI73312• 25 Foot 16/3 cord• 26 Watt• (2) 13 watt bulbs• (2) independent On/Off switches
3 Watt 120 lumen Hands-Free LED Head Lamp • Operating modes: high (100%) - low (50%) - flashing - off• Adjustable ratcheting headlamp, 180 degrees up/down, for light direction• 3 “AAA” batteries included • Covered by a 1-Year Warranty
KTI73398A
Ratcheting Torque WrenchesRatcheting style, “clicks” when torque is achieved. All wrenches complete with molded storage case.
Part No. Description
KTI72117 1/4” Dr. Torque Wrench Torque Range: 30 to 150 in/lbs.
KTI72100 3/8” Dr. Torque Wrench Torque Range: 20 to 200 in/lbs.
KTI72101 1/2” Dr. Torque Wrench Torque Range: 10 to 150 ft/lbs.
KTI72102 1/2” Dr. Torque Wrench Torque Range: 25 to 250 ft/lbs.
KTI72175 3/4” Dr. Torque Wrench Torque Range: 100 to 600 in/lbs.
Exclusive Folding Option
15 Piece Assorted Punch and Chisel Set5 pin punches, 5 starter punches, 3 cold chisels and 2 center punches in plastic tray.
5 Piece Chisel Set3/8”, 1/2”, 5/8”, 3/4” and 7/8” cold chisels.
KTI73000
6 Piece Pin Punch SetIncludes sizes: 3/32”, 1/8”, 5/32”, 3/16”, 1/4” and 5/16”.
KTI72900
Part No. SPECIALKTI72901 • Packaged in a plastic tray
KTI72901K • with kit bag organizer
CHISELS & PUNCHES
Outdoor Extension Cords• Standard outdoor extension cord• 16/3 SJTW single tap cord• Rated: 13 amps, 125 volt, 1625 watts• Flexible to -40°F, water and weather resistant• UL listed
Part No. Description
KTI73342 25 Foot
KTI73343 50 Foot
Adjustable Ratcheting Torque Wrenches• Dual scale, calibrated dual direction • Easy-to-read laser marked scales• Positive lock with spring loaded pull down lock ring • Each comes in a blow molded case• Fast, accurate and easy to set with ergonomic comfort-grip• Individually serialized with matching certifi cate of calibration traceable to N.I.S.T.• Accuracy: ± 4% clockwise ± 6% CCW of indicated value, CW, from 20% to 100% of full scale• Meets or exceeds ASME B107.14M-1994, ISO 6789 Standards• Covered by a 1-Year limited warranty
KTI72126A
KTI72121A
KTI72120A
Part # Drive Length Torque KTI72118A 1/4” 10” 20 - 150 in/lbs (~2.2 - 16.9 Nm)
KTI72120A 3/8” 11.2” 30 - 250 in/lbs (~3.4 - 28.2 Nm)
KTI72121A 3/8” 16” 10 - 100 ft/lbs (~13.5 - 135.6 Nm)
KTI72125A 1/2” 19” 20 - 150 ft/lbs (~27.1 - 203.4 Nm)
KTI72126A 1/2” 24.5” 30 - 250 ft/lbs (~40.7 - 339 Nm)
KTI72176A 3/4” 41” 100 - 600 ft/lbs (~135.6 - 813.5 Nm)
72101
72100
Pocket Light COB LED 1.5W 180 Lumen• Acrylonitrile-Butadiene-Styrene (ABS) plastic material• 1.5 Watt COB LED, 180 Lumens• Run time: 4 hrs• On/Off switch and magnet on clip• Light Size: 4.409” x 2.165” x 0.630” and weighs 0.194 lbs. with batteries
KTI73270
Rechargeable Thin Light COB LED 5W• PC & aluminum tube contruction with Acrylonitrile-Butadiene-Styrene (ABS) &
thermoplastic rubber (TPR) handle• 5 Watt COB LED, 550 Lumens high mode and 250 Lumens low mode, Top light
0.5 Watt COB LED 50 Lumens• Charge time: 3-1/2 hrs, Run time: 4 hrs on high mode / 8 hrs on low mode• Battery power indicator on handle: green about 2-1/2 hrs, yellow about 1-1/2
hrs & red about 1/2 hr; over charge and over discharge protection• Bottom of handle contains a magnet
KTI73271
Underhood Rechargeable Light 210SMD• Aluminum tube construction with thermoplastic rubber (TPR) housing material.Short circuit
protection, over charge protection• 1100 Lumens on high mode / 550 Lumens on low mode and 3.7Volt 8000mAh Li-ion
rechargeable battery• Charge time: approximately 4-1/2 hrs Run time: 3 hrs on high mode / 6 hrs on low mode• Steel pipe light holder is adjustable from 47” to 76”• Light includes 2 clamps and 2 magnetic hooks for positioning
KTI73272
4 Piece Brass Punch Set In Vinyl Pouch• Knurled handles• Designed for rugged shop environment• Vinyl display pouch• Made in the U.S.A.• Sizes include: 3/8”, 1/2”, 5/8” and 3/4”
KTI72980
TORQUE WRENCHES
LIGHTING
4
$54.99
$119.99$125.99$178.50
$84.02$110.37$120.19
$35.95
$86.08
$42.95
$51.99
$112.99
$17.09
$18.79$33.95
$54.50
$26.99
$26.82 $31.82
$49.14 $64.36
$6.99
$78.75$39.90$50.99$78.75$394.50
$99.99
$32.30
$24.49
$53.23$53.23
$533.50
$179.95
$146.60
$179.95
$149.95
$142.95
$98.50
$43.99
$10.49
$79.50
SPECIAL
SPECIAL
SPECIAL
SPECIAL
SPECIAL
Normally $59.95
$126.75
$132.59
$186.99
Normally
$95.01
$125.12
$136.02
Normally
Normally $38.99
Normally $46.69
Normally $56.95
Normally $96.06
Normally $126.62
Normally $19.49
Normally $61.80
Normally $29.99
Normally $29.62 Normally $35.17
Normally $55.75 Normally $73.38
Normally $7.49
$82.95
$41.65
$52.79
$82.95
$425.77
Normally
Normally $112.99
Normally $36.73
Normally $28.16
Normally
$57.13
$57.13
$20.54
$37.94
Normally
Normally $559.99
Normally $189.99
Normally $153.99
Normally $190.50
Normally $156.99
Normally $150.95
Normally $104.95
Normally $46.50
Normally $10.99
Normally $83.60
ELECTRICAL
Heavy Duty Circuit Tester with Sealed Clamp• For use on 6, 12 and 24 volt systems• 10’ retractable wire • 4.750” probe• Sealer clamp designed to test circuit
while the power is on• Covered by a Lifetime Warranty
KTI72782
3 Piece Needle Nose Pliers Set• Extra long (11”) needle nose pliers • Pliers manufactured with heat treated
chrome vanadium steel for long wear• Tools feature soft comfort grip handles• Packaged in handy storage pouch• Set includes: KTI71235 -15 degree offset (left), KTI71236 - 45
degree bent nose (middle) and KTI71237 - 90 degree bent nose (right)
KTI51103
72780
6/12 Volt Circuit TesterExtra Long 48” Lead, Clear Handle.
KTI72770
2209522092
23092
23095
Pro Series RatchetsHigh polish chrome finish, knurled handle and push button release. Thumb lever directional switch. Fine tooth ratchet mechanism.
22093
PRO-SERIES RATCHETS
Screwdriver Sets• Made of Chrome Vanadium steel
Part No. Description
KTI11008 8 Piece Screwdriver Set Sizes: 4 Slotted (5/16” x 6”, 3/16” x 4”,1/8” x 3”, 1/4” x 1-1/2”), 4 Phillips (#2x6”, #1x4”, #0x3”, #2x1-1/2”)
KTI11018 18 Piece Screwdriver Set Sizes: 4 Slotted, 4 Phillips, 10 Precision, 2 Slotted and 2 Phillips
KTI11035 34 Piece Screwdriver Set Sizes: 7 Phillips, 8 Slotted, 4 Torx, 2 Square, Bits Driver, 12 Bits and 4 Phillips
11018
11008
Part No. Description Over-all Length
KTI22092 3/8” Drive Pro Ratchet 7-3/4” Long
KTI22093 3/8” Dr. Swivel Head Ratchet, 180° Flex Head, Locks in 5 positions. 10-1/2” Long
KTI22095 3/8” Drive Pro Ratchet - Long Handle 11-3/4” Long
KTI23092 1/2” Drive Pro Ratchet 9-7/8” Long
KTI23095 1/2” Drive Pro Ratchet - Long Handle 15” Long
4 Piece Roll-End Pry Bar SetOne each: 6”, 12”, 16” and 20” pry bars.
KTI71600
Sanding PenOver 20,000 glass fibers in a pen point reach where normal sand paper cannot. Includes one extra sanding point in rear cap. U.S.-made.
KTI70550KTI70551 - 2-pack refill for sanding pen
Ratcheting Hose and Pipe Cutter• Materials up to 1-1/2” in diameter• The ratcheting action makes cutting smooth and easy • A one-touch, quick release lever opens pliers instantly• Built-in clasp securely locks handles when not in use for added safety• Lifetime warranty
KTI72355
WRENCHES
Professional Series Combination Wrench SetsHigh polish smooth surface. Longer than standard combination wrenches. Heat treated. Available in fractional and metric sizes. New larger sets do not have kit bag organizers
Raised Panel Combination Wrench SetsRaised panel design. High polished chrome plated protects and prevents corrosion. Heat treated. All sets include kit bag organizers. 12 point box end. Available in fractional and metric sizes.
Part No. Description Sizes
KTI41300 9 Pc. Fractional Pro Series Set with Kit Bag 3/8” to 7/8”
KTI41800 13 Pc. METRIC Pro Series Set with Kit Bag 7 to 19mm
KTI41801 9 Pc. METRIC Pro Series Set, No Kit Bag 20 to 28mm
Part No. Description Sizes
KTI41011 11 Piece Fractional Raised Panel Wrench Set 3/8” to 1”
KTI41013 13 Piece Fractional Raised Panel Wrench Set 1/4” to 1”
KTI41014 14 Piece Fractional Raised Panel Wrench Set 3/8” to 1-1/4”
KTI41016 16 Piece Fractional Raised Panel Wrench Set 1/4” to 1-1/4”
KTI41513 13 Piece METRIC Raised Panel Wrench Set 7mm to 19mm
KTI41006 6 Piece Fractional Raised Panel Wrench Set 1-3/8” to 2”
Jumbo Size, Designed for Heavy Duty Trucks and Commercial Equipment
Miniature Tubing CutterCuts 1/8” to 5/8” OD tubing. Compact size for use in confined areas. Features rollers to ease operation.
KTI72310
Heavy Duty Tubing CutterCuts 1/8” to 1-1/8” OD tubing.
KTI72330
Professional Brake Flaring Tool KitThis brake flaring tool will pay for itself with the first project, and it’ll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. Mounts in your vise to help you easily form 45° double, single and bubble flares in OE steel, stainless steel, and soft metal tubing. Use with 3/16”, 1/4”, 5/16” and 3/8” diameter lines...which means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel lines. Turret-style design allows you to make those precision flares in minimal time. Brake flaring forming dies are mounted right on the turret, so there’s no fumbling for small parts or missing dies. T-handle screw clamp holds line in place while forming.
KTI70081
Create Double, Single and Bubble flares in seconds
Hydraulic Flaring Tool Kit• Create precision 45 degree double,
single and bubble flares in seconds• Brake flaring tool works with stainless
steel, steel, and soft metal tubing• Use for brake lines, transmission cooler lines, and fuel lines• Kit contains: brake flare forming tool, 3/16” and 1/4” tube retaining
dies, adapters, handle, user manual, and storage/carrying case
KTI70082
Riveter Super Duty Hand 17” Long• Includes 5 nosepieces, 1/8”, 5/32”, 3/16”, 7/32” and 1/4”• 17” Long handles provide the leverage needed
to effortlessly secure rivets
KTI79110
12 Piece Universal Snap Ring Plier Kit • Versatile, heavy duty pliers are designed for the removal and
installation of either internal or external snap rings on a wide range of applications
• Includes the four most popular sizes in straight, 45 and 90 degree angle configurations
KTI55112
CLIP LIFTER
Clip Lifter• Tool length: 7” • Tool width: 3/4”• Red rubber handle • Covered by a 1-Year Warranty
KTI70037
HAND TOOLS
TUBING TOOLS
Heavy Duty Circuit Tester• For all 6 or 12 volt systems. • 5 Foot Heavy gauge flexible wire with ground clip and spring strain relief. • Clear handle, lights up - test result.
KTI72780
Number and Letter Stamp Set - Size 3/16”Combination set includes 3/16” set of numbers and 3/16” set of letters. Includes convenient storage case.
KTI73400
4 Piece Bent End Pry Bar Set with Screwdriver Handles• Feature smooth, comfortable square handles• High quality, bent-end pry bars• Angled tip creates extra leverage point• Packaged in plastic formed box• Set includes sizes: 9”, 12”, 18”, 24”
KTI19240KTI16000 - 10 Piece Slotted and Phillips• Sizes include: 3”, 4”, 6”, 8” and stubby slotted screwdrivers and #1,
#3, #2 x 4, #2 x 10 and stubby Phillips screwdrivers.
KTI16002 - 5 Piece Phillips• Includes: #1, #3, and #2 x 4”, #2 x 10” and stubby blades
KTI16001- 5 Piece Slotted• Includes stubby, 3”, 4”, 6” and 8” blade
Heavy Duty Cable Cutters• For use in cutting copper and aluminum• 9-1/4” Length• Jaws open to approximately 2”• Do not use on steel wire or ACSR cable
KTI52009
4-Piece Scraper/Putty Knife Set• All blades are high carbon, heat-treated, tempered, polished to mirror finish and full tang• Fitted with grommeted brass, solvent-resistant, riveted wood handles• 15º sharp chisel edge on stiff scrapers• Scraper widths measure: 1” (stiff edge); 1 1/2” (stiff edge); 1 1/2” (flexible edge); and 3” (flexible edge). All scrapers are also sold individually.
KTI70004
Professional Screwdriver Set with Triangular Grip Handles• Includes all tools contained in KTI pro series• Features comfortable triangular grip• Made of non-slip material• Chrome vanadium blades• Ultimate professional quality
KTI71714 - 16 oz.• Diameter head: 1-1/4”
KTI71715 - 24 oz. • Diameter head: 1-1/4”
KTI71733 - 32 oz. • Diameter head: 1-1/2”
KTI71782 - 27 oz.• Head diameter: 1-1/16”
KTI71783 - 48 oz.• Head diameter: 1-1/4”
Hickory Series Brass Hammers• Prevents damage to delicate parts• Non sparking • Made in the U.S.A.
Solid Brass Hammers• Non sparking prevents nicking delicate metals• Handle is solid brass • Made in the U.S.A.
5
8 Piece Phillips and Slotted Screwdriver Sets• Tools feature high quality chrome vanadium blades, heavy duty handles
and hex bolsters for wrench assist• Handles are labeled with part numbers for easy tool identification• Packaged with plastic tray• Sizes include: #1 Phillips 3” blade; #2 Phillips 1-1/2” stubby; #2 Phillips
4” blade; stubby slotted; 3” slotted; 4” slotted; 6” slotted; 8” slotted.
with Red HandlesKTI19800
with Orange HandlesKTI19700
with Black HandlesKTI19000
with Green HandlesKTI19900
9” Auto Return Wire Twister Pliers• Includes an automatic spring return for quick and efficient operation• Overall length of 8-3/4” and wire capacity of .041”• Reversible action for left and right twists• Diagonal nose to reach tight areas on your aircraft or other machinery• Covered by a Lifetime Warranty
KTI59000
$7.39
$28.99
$4.69
$10.50
$41.64
$36.15$46.75$41.39$46.52$51.44
$51.10
$15.50$20.99$40.99
$26.34
$6.39
$3.99
$67.40$81.93$122.80
$57.47$70.86$98.98$114.46$51.16$213.57
$6.79
$10.99
$293.61
$223.50
$62.99
$167.50
$17.99
$39.99$52.99
$29.99
$27.50
$23.99
$16.89
$29.95
$38.95
$45.95
$51.95
$73.99
SPECIAL
SPECIAL
SPECIAL
SPECIAL
$21.94
$21.94
$21.94
$21.94
$35.99
Normally $12.91
Normally $5.82
Normally $46.92
Normally $9.97
Normally $32.69
Normally $58.17
Normally $29.66
Normally $7.01
Normally $4.35
$16.29
$23.29
$43.99
Normally
$40.78
$52.77
$46.72
$51.28
$56.71
Normally
$65.89
$81.12
$112.28
$131.10
$58.45
$245.49
Normally
$76.64
$93.10
$141.71
Normally
Normally $7.39
Normally $12.20
Normally $336.88
Normally $232.95
Normally $65.50
Normally $195.76
Normally $19.99
Normally $47.95
Normally $59.09
Normally $33.70
Normally $30.40
Normally $27.49
Normally $18.39
Normally $31.28
Normally $40.43
Normally $48.00
Normally $54.08
Normally $77.89
Normally $24.74
Normally $24.74
Normally $24.74
Normally $24.74
Normally $37.69
6
00081
00082
0008000071
00072
00077
00097
00074
00089
00086
KTI Service KitsThese are assortments of consumable items that must be purchased by complete kits. The items inside these service kits are NOT available individually. Kits are NOT refillable.
SERVICE KITSADHESIVE
PULLERS
Bonds Almost Anything in Seconds
Q-Bond® Large Repair Kit (QB3)Q-Bond can be used just as an adhesive or with the reinforcing powders that will help to repair almost anything. Q-Bond repairs can be grinded, filed, sanded and even painted. Each Q-Bond Large Repair kit includes six (6) bottles Q-Bond adhesive (0.35oz/10ml); two (2) bottles black reinforcing powder for plastics; one (1) bottle grey reinforcing powder for metals.
KTI90005
COIL SPRING TOOLS
Single Action Coil Spring Compressor Fits most American and some import cars.
KTI70375
MacPherson Heavy Duty Strut Spring Compressor• Works with most MacPherson Strut assemblies to quickly assist
in replacement of bent struts, strut tubes and damaged filters• Works on or off the vehicles. Acme threaded screw for durability• Made in USA.
KTI70371
Universal Strut Spring CompressorService a wide range of MacPherson struts without any special adapter shoes. Jaws are held by safety locking pins. Springs 4” to 9” O.D. and wire diameter of 7/16” to 11/16”.
KTI70372
MacPherson Strut Spring Compressor • Works on most MacPherson strut assemblies• Use the compressor when replacing bent strut or strut tube
and damaged spindles• Acme threaded screw for durability• Not for use on GM “A”, “C”, “J” or “X” body cars• Use on or off vehicle
KTI70370
Part No. Description
KTI00071 150 Piece Hitch Pin Assortment Six different sizes 1-3/16” to 2-15/16” Long
KTI00072 300 “E” Clip Assortment 9 sizes from 1/16” to 7/8”
KTI00075 555 Cotter Pin Assortment Small Pins from 1/16” x 1” to 5/32” x 2-1/2”
KTI00077 300 Snap Ring Assortment Wide assortment of 18 different sizes.
KTI00078 144 Cotter Pin Assortment Large Pins from 1/8” x 2” to 5/16” x 2-1/2”
KTI00080 120 Pc. Auto Fuse Assortment Color coded fuses from 5Amp to 30Amp
KTI00081 120 Pc. Mini Auto Fuse Assortment Color coded fuses from 2Amp to 30Amp
KTI00082 56 Pc. Maxi Auto Fuse Assortment Color coded fuses from 20Amp to 100Amp
KTI00084 170 Pc. U-Clip & Screw Assortment Nine popular products in a variety of sizes
KTI00085 200 Pc. Hex Head Washer Drill Assortment 8 popular sizes, ranging from #8 to #10
KTI00086 270 Pc. HNBR O-Ring Assortment 17 sizes High Temperature Green (for A/C)
KTI00089 110 Pc. Copper Washer Assortment 6 sizes from 1/4” to 5/8”
KTI00091 125 Pc. Grommet Assortment 18 different sizes
KTI00093 120 Pc. Roll Pin Assortment 30 different sizes
KTI00094 407 Pc. Universal O-Ring Assortment Sizes: 1/8” to 2” ID and 1/4” to 2-1/4” OD
KTI00095 419 Pc. Universal O-Ring Assortment Sizes: 3mm to 50mm ID
KTI00096 110 Pc. Metric Grease Fitting Asst. 6mm and 10mm fittings, straight, 45° and 90°
KTI00074 110 Pc. Fractional Grease Fitting Asst. 1/4-28 &1/8-27 fittings, straight, 45° and 90°
KTI00097 157 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA
KTI00087 360 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA
BUDD WHEEL
Remove nut & stud with one socket
5 Piece 1” Drive Budd Wheel Service KitUse with 1” drive impact. Set includes 33mm Hex, 35mm Hex x 17mm Square Deep, 38mm Hex x 20mm Square Deep, 41mm Hex x 21mm Square Deep and 1-1/2” Hex x 3/4” Square Deep Budd Wheel Sockets.
KTI35005
KTI74652• Plastic with spout cap• 8 Quart capacity• Covered by a 1-year warranty
DRAIN PANS
Super Single Axle Drain PanCatches oil, axle nuts, bearings - most anything removed from the wheel end for service. Works with most dual and super single wheel sizes 22.5 and 24.5, steel or aluminum wheels, hub piloted or stud piloted, drive or trailer axles. Attaches with a hand tightened lug nut. Will not tip or spill - virtually eliminating clean-up. Durable, lightweight HDPE plastic. Made in USA.
KTI74640
Oil Drain Pan and Antifreeze Drain Pan• Built-in anti-splash lip & baffles• Large spout for fast pouring. Includes spout cap for spill protection• High density polyethylene construction, chemical & solvent resistant• Green color provides visual identification for use with antifreeze (KTI74647)• Capacity 4-1/4 gallon• Covered by a 1-year warranty• High strength polyethylene for use in workshops/garages
KTI74645KTI74647
KTI74647
KTI74645
3-Quart Drum Funnel with Hinged Lid• Tough industrial quality • Fits 2” threaded drums• Chemically resistant polyethylene
KTI74612
“The Guzzler” Pivot Funnel • Large capacity funnel has ball pivot at base of funnel• Directs flow without spilling • Made in the USA.
KTI74603
Drum Funnel• Threaded end screws on to 55 gallon drum• Durable, flexible • Made in the USA.
KTI74604
Fluid Measureswith Flex Spouts• Color: Translucent• Quart/Liter markings• Removable flex spouts• Flip top lids
KTI74650• Chemically resistant polyethylene• 2 Liter capacity
KTI74651• Chemically resistant polyethylene• 5 Liter capacity
FUNNELS FLUID MEASURES
LIFTING
Aluminum Service Jacks• Very strong, Complies With ASME PASE/2014 Safety Standards• Dual pump system for quick lifting (7 strokes to top under no load). Lifting range 3 1/4” - 18 1/2”• Side handle for easy positioning• 2 pc handle for easy storage. Includes handle pad for protecting the vehicle• Covered by a 2 Year Warranty
KTI63098 - 2 ton capacity• Length: 30.070”, Width: 15.540”, Height: 6.690” and Weight: 48.5 lbs
KTI63099 - 3 ton capacity• Length: 30.070”, Width: 14.960”, Height: 7.080” and Weighs only 58.4 lbs.
1.5 Ton Aluminum Racing Jack• 1.5 Ton (3300 lbs) aluminum double-piston hydraulic floor jack raises the vehicle quickly; 7 strokes (no load)• High lift range: 3-5/8” - 14-1/4”; Handle length: 37-2/5”; Saddle diameter: 3-4/5”• High lift range / Extra long, low profile design for low clearance vehicles / Swivel saddle & swivel rear casters
for easy positioning and safety• Front wheels diameter 1-3/5” x 4-2/5” wide; Rear casters diameter 1-3/5” x 3/5” wide• Weighs only 31 lbs.
KTI63094
KTI63098KTI630993” Two Jaw, Two Ton
• Spread: 4”; reach: 3-1/4”
KTI70301
3” Two/Three Jaw, Two Ton• Spread: 4-3/4”; reach: 3-1/2”
KTI70302
4” Two Jaw, Five Ton• Spread: 6”; reach: 3-1/4”
KTI70303
4” Two/Three Jaw, Five Ton• Spread: 7”; reach: 3-1/4”
KTI70304
6” Two Jaw, Five Ton• Spread: 6”; reach: 3-1/4”
KTI70305
6” Two/Three Jaw 5 Ton• Spread: 7”; reach: 3-1/4”
KTI70306
Reversible Pullers• Reversible jaws feature a wide face on one end and a narrow
face on the other - its like two tools in one• Grip tightens as pressure is applied• Manufactured with heat-treated, drop forged, alloy steel
STEP DRILL BITSStep Drill Bits • Titanium coated • High-speed steel (HSS) 4241• HRC 60-63 (Rockwell Scale) • Covered by a 1 year warranty
KTI71235 Size: 1/8” - 1/2”
KTI71236 Size: 3/16” to 1/2”
KTI71237 Size: 1/4” to 3/4”
KTI71233 3 Piece Set - Sizes: 1/8” to 1/2”, 3/16” to 1/2” & 1/4” to 3/4”
KTI71235KTI71236
KTI71237
Tire Inflator GaugeRange from 10 to 120 lbs. shown in 2 lb. increments, 15” air hose with 1/4” female NPT, 6” chrome-plated dual-head chuck and 3/8” - 24 thread air inlet. Weatherproof aluminum body with corrosion-resistant brass valve. Withstands everyday use and abuse. Gauge and valve cartridges are replaceable. Magnifying bubble lens. Angled tip makes it easy to inflate tires on trucks with dual wheels.
KTI89002
Digital Air Inflator• Range of 2 to 150 psi with 0.1 psi resolution• Boasts a dual head chuck and is accurate to within ±1% + 0.5psi at 100psi and ±2% + 0.5psi at 150psi• Programmed to work with various units of measurement (psi/bar/kpa/kg/cm2)• Works on TPMS equipped wheels• Features include a large face
LCD digital display, anti-oil rubber casting and ergonomic grip
KTI89001
Tire Repair Kit• Tire Repair Kit, for Tubeless Tires• Kit includes: (2) T Handles - 1 with steel insertion needle and 1 with
steel spiral reamer, (2) Allen Wrenches, Lube, 50 4” Strips, in Case
KTI71930
TIRE TOOLSLocking Lug Nut Remover KitRemoves locking lug nuts and locking hubcaps on most vehicles. For use with impact wrenches.
KTI71910
Combi Wedge• Heavy duty universal combination wedge tool• Use on dashboards and door cover clips• Tool length: 8.5”, width: 1”, height: 1”• Color: Red • 1-Year Warranty
KTI70038
PBE
$14.33
$35.95$46.50
$53.50
$189.99
$34.99$8.98$8.98$7.72$7.00$10.60$12.56$16.16$66.37$8.98$7.69$22.78$14.72$8.98$8.98$14.39$14.39$19.71$18.59$12.56$30.50
$146.02
$19.39
$26.99$13.49$15.59
$41.41
$9.19
$15.95
$12.91
$22.69
SPECIAL
$273.95
$299.99
$141.95
$22.79
$27.90
$33.30
$36.99
$40.69
$45.50
$5.69
$14.29
$5.99$7.19
$44.04
$82.50
$25.99
$72.50
$9.45
Normally $49.99
Normally $55.95
Normally $199.99
Normally $35.99
Normally $16.39
Normally $36.50
Q-Bond® Adhesive Repair Kit• Rock solid in 10 seconds!• Ultra-strong adhesive and reinforcing powders• Repairs can be grinded, filed, sanded and even painted!• Includes 2 Q-BOND adhesive; 1 black reinforcing powder; 1 grey reinforcing powder
KTI90002
Normally
$10.10
$10.20
$8.74
$7.95
$12.05
$14.24
$18.30
$75.27
$10.20
$8.09
$25.89
$16.65
$10.12
$10.21
$15.09
$15.69
$22.38
$21.03
$13.85
$33.53
Normally $155.46
Normally $20.49
Normally $29.95
Normally $13.89
Normally $16.29
Normally $41.95
Normally $9.78
Normally $16.94
Normally $12.99
Normally $22.89
Normally $299.99
Normally $347.25
Normally $146.99
Normally $24.40
Normally $29.92
Normally $35.83
Normally $39.58
Normally $43.42
Normally $48.65
Normally $6.25
Normally $15.70
Normally $6.39
Normally $7.99
Normally $28.50
Normally $102.15
Normally $55.08
Normally $76.89
Normally $9.80
XD Bottle Jacks• Ram extension screw adjusts low height to get full use of ram travel• Load-limiting and bypass valves prevent against over loading and over extension• Ductile iron hydraulic base for added strength• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
Part No. Description
KTI63213 12 Ton XD Bottle Jacks Lifting Range: 8.46” to 15.75”
KTI63221 20 Ton XD Bottle Jacks Lifting Range: 9.6” to 16.65”
KTI63214 12 Ton SHORT XD Bottle Jacks Lifting Range: 7.48” to 13.78”
KTI63224 20 Ton SHORT XD Bottle Jacks Lifting Range: 7.25” to 11.75”
Ratcheting Action
3 Ton Compact Service Jack• Capacity: 3 Tons • Lifting range: 5.3” - 18.5 “• Sealed hydraulic power unit• Load-limiting and bypass valves prevent use
beyond rated capacity & over extension of ram• Complies With ASME PASE-2014 Safety Standards• 1 Year warranty on material and workmanship
KTI63131
• 45.25” long pump handle for easy pumping under load• Dual pump piston power unit• Load-limiting and bypass valves to prevent use beyond rated
capacity and over-extension of ram• Complies With ASME PASE-2014
Safety Standards• 2 Year warranty on material
and workmanship
2 Ton Extra Long Low Profile Service Jack• 2 ton capacity extra long low profile service jack for easy access
under low ground clearance vehicles• Lift range from 2.75” to 24”• Raises saddle to maximum height in 8 full pump strokes - no load• Saddle diameter 3.85”
KTI63105
2 Ton Low Profile Service Jack• 2 ton capacity low profile service jack for easy access under low
ground clearance vehicles• Lift range from 3.5” to 18.1”• Raises saddle to maximum height in 6.5 full pump strokes - no load• Saddle diameter 4.3” • Weighs: 67.2 lbs.
KTI63101
Jack Stands• Designed to be used in pairs• Steel base with four feet pads for stability• Ratchet action design with ductile iron support column• Complies With ASME PASE-2014 Safety Standards• 2 Year warranty on material and workmanship
Part No. Description
KTI61202 3 Ton Jack Stands - Pair Lifting Range: 11.6” to 16.75”. Weight: 16 lbs.
KTI61205 6 Ton Jack Stands - Pair Lifting Range: 15.75” to 24”. Weight: 32.5 lbs.
KTI61211 12 Ton Jack Stands - Pair Lifting Range: 19.63” to 30.25”. Weight: 75 lbs.
1000 Lb Single Stage Transmission Jack• Capacity: 1,000 lbs. • Lifting Range: 43.625”- 71”• Saddle tilt: 23 degrees forward
and 16 degrees backward• For automotive use up to light duty pickup trucks• Foot pedal activation easily raises single ram under load• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63502
6321363214
7
1200 Lb Low Profile Transmission Jack• 1200 pound capacity transmission
jack with a lift range from 5.75” to 31.5”• For automotive use up to pickup truck transmissions• Wide front-open chassis for lower profile when loaded• Full swivel pump handle can be accessed in any work position• Fully adjustable universal saddle with load securing hardware• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63515
700 lb Pedestal Transmission Jack• Hand pumped, long stroke, single stage bottle jack,
with a release lever to discharge the load• Load-limiting and bypass valves prevent
against over loading and over extension• Adaptable saddle, with four angle brackets
that can adjust to fit transmission pan flanges• Adjustable safety chain included to aid in load restraint• 1 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63500
1,000 Lb Geared Engine Stand• 1000 pound capacity foldable engine stand
for convenient storage when not in use• Worm gear driven mounting plate with adjustable
fingers rotates for desired engine position• Four wheel design with locking caster
wheels to prevent stand from moving• Made of structural steel plate and tubing for added strength• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI62110
2 Ton Tripod Underhoist Stand• 2 ton under hoist stand designed to
help stabilize a vehicle suspended by an above-ground lift
• Support range from 68” to 76”• Acme threaded screw for 8” of
fine adjustment• Bearing mounted spin handle for
easy raising and lowering of screw• 24” triangle shaped base and 3.25”
square saddle provide additional stability• Complies With ASME PASE-2014
Safety Standards• 2 Year warranty on material
and workmanship
KTI61002
3/4 Ton Utility Underhoist Stand• Support under car components• Height range from 53” to 79”• Acme threaded screw for self-locking positioning• Bearing mounted spin handle for easy raising
and lowering of screw• 12” diameter base with 1.63” x 5.5” saddle• Complies With ASME PASE-2014 Safety Standards• 2 Year warranty on material and workmanship
KTI61076
3/4 Ton Utility Underhoist Stand with Pedal• Foot pedal to raise screw another 1.25” under
400 pounds of load
KTI61077
4 Ton Portable Ram Kit• 7,250 PSI hand pump and 10.5” long ram with 4.75” stroke• Basic attachments, .5 ton spreader ram, and five
extension tubes included
KTI63703
Portable Ram Kits• Portable ram kit for spreading,
bending, pushing, and clamping• Force gauge to measure force applied to work• Snap-fit design for quick attachment and tube connections• 2 Year Warranty on material and workmanship
10 Ton Portable Ram Kit• 8,050 PSI hand pump and 12.6” long ram with 5.12” stroke• Basic attachments, .5 ton spreader ram, and four
extension tubes included
KTI63709
1.5 Ton Foldable Engine Crane With Fast Rise• 750 Lbs. /1,500 Lbs. /2,250 Lbs. / 3,000 Lbs. capacity engine crane with four different boom positions• Legs and boom fold quickly for storage • 4.25” low profile base• Fast rise pump without a load• 48” long boom with chain and swivel hook included• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63421
3.33 Ton Low Profile Service Jack• Lift range from 3.5” to 21.375”• 50” long pump handle for easy pumping under load• Dual pump piston power unit raises saddle to maximum
height in 8 full incremental pump strokes with no load• Load-limiting and bypass valves to prevent use beyond
rated capacity and over-extension of ram• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63133
800 Lb. H-Style Engine Stand• Capacity: 800 lbs • Weight: 49.8 lbs• H-frame design base with four wheels provides stability• Stand made of structural steel tubing for strength and
light enough for easy maneuverability• Fully adjustable mounting head and adapter fingers• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI62108
20 Ton Air Hydraulic Bottle Jack• Lifting Range: 10.43” - 19.88”• Air/hydraulic pump with air valve lever
reduces lifting time and provides ease of operation• Load limiting and bypass valves prevent use
beyond rated capacity and over extension of ram• Additional adjustable screw 3.25”• 2 Year Warranty on material and workmanship• Complies With ASME PASE-2014 Safety Standards
KTI63228
Ductile iron support column
22 Ton Air Hydraulic Jack with 1” Air Impact• A combination package including a 22 ton capacity truck jack with a lift range from 9.06” to 17.94” and a
1” drive air impact wrench with 6” extended anvil• The air hydraulic jack has load-limiting and bypass valves which prevent use beyond rated capacity and
overextension of ram with spring activated self retracting ram. Has release knob at the top of the T handle works at any handle position and narrow width fits between tandem wheels
• The air impact wrench has a 6” extended anvil for extra access, 1,600 ft/lbs of torque, 3 forward and 3 re-verse power settings, a D side handle for ease of use and side exhaust which directs air away from the job
• The hydraulic jack complies with ASME PASE/2014 safety standards and is covered by a 2 year warranty on material and workmanship
• The 1” air impact wrench (KTI81798A) is covered by a 1 year warranty
KTI63194COMBO
LIFTING
$47.84$70.54$47.84$70.54
$535.70
$172.95
$287.99 $194.95
$38.50$74.50$166.99
$112.99
$499.98
$99.99
$99.99
$232.99
$489.50$299.50
$369.95
$239.79 $319.99
$123.20
$189.99
$533.50
SPECIAL
SPECIAL
Normally $571.41
Normally $203.19
Normally $612.29Normally $339.95 Normally $229.99
$54.69
$80.99
$54.69
$80.99
Normally
$44.89
$88.89
$198.98
Normally
Normally $281.59
Normally $571.49Normally $345.99
Normally $449.99
Normally $140.69
Normally $285.69 Normally $384.69
Normally $140.89
Normally $140.69
Normally $152.99
Normally $223.59
Normally $639.99
8
Rechargeable Spotlight 10W, 480 Lumen• 1 LED rechargeable spotlight 480 Lumens with
durable ABS housing and long lasting LED• Multiple lighting modes: High/Low/SOS mode• Waterproof and floats• Rechargeable 3.7V 2200mAh Lithium-Ion
Battery with charging and discharging protection• Charge time: 40-60 minutes• Run time: 1 hour on high mode and 3 hours on low mode• AC/DC adapter and 12V car charger included
FMCFL1001
Rechargeable LED Worklight/Flashlight• Impact resistant ABS housing with rubber cover• 3.7 Volt 1800mA lithium battery• USB charging• 120 lumens, 3 watt• Charge time: 4-6 hours, delivering up to 4 hours
of worklight use and 24 hours as torchlight• 1-year warranty
FMCFL1002A
250 Lumens, “C” Battery Operated• Requires 3 “C” batteries• Run time: 8 hours
FMCFL1003
250 Lumens, AAA Battery Operated• Requires 3 “AAA” batteries• Run time: 2 hours
FMCFL1004
65 Lumen, Battery Operated• Requires 1 “AA” battery• Run time: 1-1/2 hours• Wrist strap provided
FMCFL1006
FMCFL1012 - 120 Lumens• Multiple lighting modes: High/Low/Flash
FMCFL1014 - 250 Lumens• Multiple lighting modes: High/Low/Flash/SOS
Aluminum Flashlight LED 200 Lumens• Aluminum housing, CREE XPG 1 LED flashlight 200 Lumens• Multiple lighting modes: High/Low/Flash• Requires 2 “D” batteries • Run time: 4 hours• Size: 2.205” x 10.551” • Covered by a 1 year warranty
FMCFL1022
Aluminum Flashlight LED 150 Lumens• Aluminum housing 1 LED flashlight 150 Lumens• Requires 2 “AA” batteries • Run time: 1.5 hours• Size: 1.083” x 6.004” • Covered by a 1 year warranty
FMCFL1028
Aluminum Flashlight LED 300 Lumens• Aluminum housing, CREE XPG 1 LED flashlight 300 Lumens• Multiple lighting modes: High/Low/Flash• Requires 3 “AAA” batteries• Run time: 2 hours • Size: 1.378” x 4.646”• Covered by a 1 year warranty
FMCFL1030
Aluminum Flashlight LED 150 Lumens• Belt clip and on/off button • Requires 2 “AAA” batteries• Run time: 1 hour • Size: 0.906” x 6.004”• Covered by a 1 year warranty
FMCFL1034
Keychain Aluminum Flashlight LED 80 Lumens• Requires 1 “AAA” battery • Run time: 1 hour• Size: 0.9” x 4” • Covered by a 1 year warranty
FMCFL1035
Aluminum Flashlight LED 700 Lumens• Aluminum housing, CREE XPG 1 LED flashlight 700 Lumens• Multiple lighting modes: High/Low/Flash• Requires 3 “D” batteries • Run time: 4 hours• Size: 2.205” x 12.795” • Covered by a 1 year warranty
FMCFL1020
Plastic Creeper• Durable rigid plastic and polyurethane padding for head rest• Ergonomic design• Six roller directional wheels• Overall size: 39.76” x 18.70” x 5.12”• Covered by a 2-year warranty
FMCFCA020
Car Creeper• 35 degree adjustable backrest• Heavy duty steel frame construction with polyurethane padding• Six roller directional wheels• Overall size: 40.15” x 16.73” x 4.33”• Covered by a 2 year warranty
FMCFCA019
CREEPERS
LIGHTING
Booster Cables • Booster cables have a tangle-free design• Flexible to -40 degree Fahrenheit temperatures• Vinyl coated clamps help prevent rust and corrosion• For side and top battery post
KTI74500
KTI74521
KTI74510
KTI74530
Part No. Description Wire Clamps
KTI74500 12 ft Light Duty 10 Gauge 250 Amp
KTI74505 12 ft Medium Duty 8 Gauge 400 Amp
KTI74510 16 ft Heavy Duty 6 Gauge 400 Amp
KTI74521 16 ft Extra Heavy Duty 4 Gauge 400 Amp
KTI74523 20 ft Extra Heavy Duty 4 Gauge 500 Amp
KTI74524 20 ft Extra Heavy Duty 4 Gauge 400 Amp
KTI74530 25 ft Professional 2 Gauge 500 Amp
KTI74505
400 Amp Booster Cable Replacement Clamps• Vinyl coated clamps help prevent rust and corrosion
KTI74536
800 Amp Booster Cable Replacement Clamps• Vinyl coated clamps help prevent rust and corrosion
KTI74538
500 Amp Parrot Claw Booster Cable Replacement Clamps (Pair)KTI74535
160 Lumens, AA Battery Operated• Requires 2 “AA” batteries• Run time: 1-1/2 hours
FMCFL1005
Rechargeable Aluminum LED Flashlights• Aluminum housing, CREE XPE 1 LED rechargeable flashlight • Long lasting LED• Rechargeable 18650 Lithium-Ion
with a run time of 120 minutes• Wrist strap, battery, and charger included
Aluminum LED Flashlight, • Aluminum housing, CREE XPG 1 LED flashlight• Long lasting LED• Multiple lighting modes: High/Low/Flash
CORDLESS POWER TOOLS
TOOL STORAGE
Tool Box HD Plastic 19.7”x10.8”x10.4”• Heavy duty plastic tool box: 19.685”x10.827”x10.433”• Double clasp system• Four rubber corners• Long aluminum handle for easy grip and accessibility• Heavy duty metal latches with padlock eyes to fasten the tool box• Covered by a 2 year warranty
FMCFHT0315
Tool Box HD Plastic 25.6” x 10.8” x 10.4”FMCFHT0316
Canvas Tool Bag• Canvas tool bag: 17.126”x9.055”x11.811”• Lightweight• Heavy-duty design• High resistant material• Covered by a 2 year warranty
FMCFHT0389
BATTERY SERVICE
12 Volt Cordless Drill Driver• 12 volt cordless drill with Mabuchi motor,
fast charger and two batteries• No-load Speed: 0-400 / 0-1500rpm• Maximum Torque: 22 ft/lbs (30Nm)• Chuck: 3/8” (10mm) plastic single sleeve chuck• Two Li-ion batteries: 1500mAh each
FMCF12-01
Li-ion Battery 12 Volt 2.6Ah• Quick charging with Deep discharge protection• Capacity: 2600mAh (can charge the 1500mAh Li-ion batteries)• Battery Indicator• Compatible with FMCF12-01• Covered by a 1 year warranty
FMCF12-03
18 Volt Cordless Drill Driver• Chuck: 1/2”(13mm) metal• Two Li-ion 1500mAh batteries• No-load Speed: 0-450 / 0-1700rpm• Maximum Torque: 36 ft/lbs (50N.m.)• Soft grip handle, LED Light• Automatic spindle lock, speed control selector,
battery indicator on the battery pack
FMCF18-01
18 Volt Cordless Impact Driver• Chuck: 1/4” hex• Two Li-ion 1500mAh batteries• No-load Speed: 0-2900rpm• Maximum Torque: 110 ft/lbs (150N.m)• Impact Rate: 3300bpm• Soft grip handle, LED Light, Battery level indicator
FMCF18-03
18 Volt Cordless Small Body Impact Wrench• Chuck: 1/2” square drive• Two Li-ion 1500mAh batteries• No-load Speed: 0-2900rpm• Maximum Torque: 162 ft/lbs (220N.m)• Impact Rate: 3300bpm• Soft grip handle, LED Light, Battery level indicator
FMCF18-04
18 Volt Flashlight - 3 Watt 75/150 Lumens• 3 Watt 75 / 150 Lumens controlled with the On/Off switch• Ergonomically designed high resistance nylon body• Soft grip handle and pivoting head• Compatible with the 18V universal battery platform• Covered by a 1 year warranty
FMCF18-05
18 Volt / 2.6Ah Li-ion Battery• Quick charging 18 volt Li-ion battery• Deep discharge protection• Capacity: 2600mAh (can charge the 1500mAh Li-ion batteries)• Battery Indicator• Universal battery platform, compatible with all F18 line products
FMCF18-08
NEW
NEW
NEWNEW
NEW
NEWNEW
$13.69
$13.69
$12.49
$28.50
$21.20
$115.79 $34.65
$170.59 $170.59 $170.59
$25.95
$45.85
$23.59
$12.99
$12.99
$11.15 $9.79
$31.45
$49.99 $52.95
$68.50
$23.75
$22.75
$35.40
$43.99$26.99
$10.99$16.39$24.50$33.95$46.99$36.80$65.99
$4.70
$38.95
$10.79
SPECIAL
Normally $14.79
Normally $14.79
Normally $13.30
Normally $29.99
Normally $22.50
Normally $71.50
Normally $24.99
Normally $23.88
Normally $124.43Normally $35.95
Normally $179.95 Normally $179.95 Normally $179.95
Normally $26.99
Normally $47.99
Normally $26.96
Normally $14.85
Normally $14.85
Normally $12.74 Normally $10.50
Normally $35.94
Normally $5.09
Normally $54.34 Normally $57.83
Normally $38.48
Normally $47.86Normally $31.37
Normally $44.99
Normally $12.29
$12.53
$19.54
$28.55
$40.30
$55.99
$44.99
$82.11
Normally