Download - Washing Solutions
Washing SolutionsEUROPEAN & AMERICAN
WASHING SHRINKAGE
SPIRALITY
APPEARANCE AFTER LAUNDERING
WRINKLE FREE ASSESSMENT
EASY-IRON ASSESSMENT
WASHES BEFORE ABRASION TESTS
WASHES BEFORE PILLING TESTS
WASHES BEFORE FLAMMABILITY TESTS
WORLD CLASS PRODUCTS
WORLD CLASS SUPPORT
WORLD CLASS TECHNICAL HELP
WORLDWIDE SOLUTIONS
Wascator Washing Machine FOR EUROPEAN WASHING TESTS
WASCATOR FOM71 CLS replaces the FOM71MP LAB and earlier Models that are now not available.
CLS conforms to the existing European requirements for washing machines for textile testing laboratories. Major European Retailers approve use of CLS.
An automatic Soap Dispenser is also available. Please ask us for more details.
EN ISO 6330 : 2000EN 26330 : 1993 & ISO 6330 : 1984Wascator is approved by Marks and Spencer and Marks and Spencer and Marks and Spencer NEXT for many of their Test Routines.
Additional Programmes can be supplied to meet the needs of other Retailers and Customers.
The machine conforms to the requirements of other major European Retail Store Groups.
TEST ROUTINES FOR WASCATOR FOM71 CLS
We supply all the required working accessories and consumables: Templates, Shrinkage Rulers, Detergents, Makeweights and Marker Pens.
We will also quote for installation and for training required to operate the machine correctly.
Training to perform test routines is available as a separate package.
CONSUMABLES & ACCESSORIES
Dry Load Capacity: 5–6.5kgSpin Speed: 200–1100rpmWidth: 720mmDepth: 690mmHeight: 1315mmWeight: Approx 184kgElectric Supply: 3 phase and neutral 400V 50Hz
(10A per phase) 3 phase 220V 60Hz (16A per phase)
Water Supply: Hot and coldMinimum Water Pressure: 1.5 barMaximum Water Pressure: 4.0 barMaximum Water Temperature: 60˚CDrain: 75mm diameter (minimum)
free drain (drain position no more than 150mm above base of machine – please askfor more details)
MAIN SPECIFICATIONS
CLS has significant practical differences from the earlier machines. The major differences are as follows:
> Water Levels can be set by the height of water in the drum, or by the weight of water put into the machine
> The drum is suspended in the machine, so special foundations are not needed when it is installed
The machine is supplied pre-programmed for EN ISO 6330 : 2000, EN 26330 : 1993 and ISO 6330 : 1984. M & S and other programmes are supplied on a locked memory card.
Additional programmes can be supplied by HEALS or can be created by the user as required.
All programmes are tested to ensure that they are correct before they are supplied.
The machine’s construction and the materials and components used in its manufacture ensure reliability and long life.
UKAS Certificates of Calibration are also availiable.
Accudry Tumble DryerFOR EUROPEAN DRYING TESTS
From the team that introduced the world’s first standardised tumble dryer, specifically designed for laboratory stability tests, comes Accudry .
Textile laboratories carry out a wide range of tests, in which domestic laundering conditions are simulated. Domestic tumble dryers have not been designed with the needs of the textile testing laboratory in mind, with predictable problems of wide variation in performance from machine to machine and between different manufacturers. There have also been widespread problems of machine reliability and continuity of supply of particular models.
Responding to these challenges, James H. Heal developed Accudry , an air vented, reverse-action tumble dryer, designed to reduce machine variables and operator error to the absolute minimum.
Accudry conforms to the existing European requirements for Tumble Dryers for textile testing laboratories.
2
2
2
2
EN ISO 6330:2000 EN 26330:1993 & ISO 6330:1984
Accudry conforms to the requirements of major European Retail Store Groups, including Marks and Spencer and Next and is suitable for use in the Woolmark Company’s Test Methods TM 31 and TM 254
TEST ROUTINES FOR ACCUDRY
HEALINK - the Service and Calibration division of HEALINK - the Service and Calibration division of HEALINKJames H Heal - is responsible for after sales services throughout the world.
Dependent on the instrument, our standard warranty is either 12 or 18 months.
During the warranty period, engineering and applications support are provided without charge.
On expiration of the warranty, engineering and applications support may be continued by taking out a service and/or calibration contract.
Calibration procedures are based on ISO 17025 and many are UKAS (United Kingdom Accreditation Service) approved.
Please ask us for more details.
AFTER SALES SERVICES
Width: 600mm
Depth : 625mm
Height: 850mm
Weight: 35kg
Exhaust Air Temperature: 80 ºC (maximum)
Rational Speed: 56rpm
Directional Change: Every 5 minutes
Power Requirement: Single phase 230V ±10%,
50Hz
Alternative voltages and frequencies are not presently
available
Warranty: 12 Months
Life Expectancy:12,000 hours, subject to a Healink
Service every 12 months
MAIN SPECIFICATIONS
Key Features & Benefits:
• Guaranteed compliance with standards
• Single operator, multilingual control panel
• Accurate control of heating and cooling periods
• Precise control of the exhaust air temperature
• Dual filtration system
• Based on a robust domestic appliance
• Service and calibration facilities available
2Accudry conforms to the requirements of major European Retail Store Groups, including2Accudry conforms to the requirements of major European Retail Store Groups, including
2
Washer & DryerFOR AMERICAN WASHING AND DRYING TESTS
Retailers and Producers in the United States normally use AATCC Washing Test Routines for their products. AATCC specify which Washing Machines and which Tumble Dryers conform to their Test Methods.
The machines specified by AATCC are domestic machines, sold in the USA under the name Kenmore. Equivalent models are exported under the name of Whirlpool. Only specific models taken from a large range of machines conform to the AATCC specification.
HEALS supply exactly the machines that conform to the AATCC specification to customers in any location in the world.
The machines are free-standing without the need for special foundations. The Washing Machines do not have heaters so connection to a hot and cold water supply is essential.
Whirlpool/Kenmore Washer Whirlpool/Kenmore Dryer
AATCC 88B Smoothness of Seams in Fabrics after Repeated Home Laundering
AATCC 88C Retention of Creases in Fabrics after Repeated Home Laundering
AATCC 99 Dimensional Changes of Woven or Knitted Wool Textiles: Relaxation, Consolidation and Felting
AATCC 114 Chlorine, Retained, Tensile Loss: Multiple Sample Method
AATCC 124 Appearance of Fabrics after Repeated Home Laundering
AATCC 130 Soil Release: Oily Stain Release Method
AATCC 135 Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics
AATCC 136 Bond Strength of Bonded and Laminated Fabrics
AATCC 142 Appearance of Flocked Fabrics after Repeated Home Laundering and/or Coin-Op Drycleaning
AATCC 143 Appearance of Apparel and other Textile End Products after Repeated Home Laundering
AATCC 150 Dimensional Changes in Automatic Home Laundering of Garments
AATCC 172 Colorfastness to Non-Chlorine Bleach in Home Laundering
AATCC 179 Skewness Change in Fabric and Garment Twist Resulting from Automatic Home Laundering
AATCC 188 Colorfastness to Sodium Hypochlorite Bleach in Home Laundering
The machines conform to the needs of the major USA Retail Store Groups.
TEST ROUTINES FOR WHIRLPOOL/KENMORE WASHERS AND DRYERS
HEALINK - the Service and Calibration division of HEALINK - the Service and Calibration division of HEALINKJames H Heal - is responsible for after sales services throughout the world.
Dependent on the instrument, our standard warranty is either 12 or 18 months.
During the warranty period, engineering and applications support are provided without charge.
On expiration of the warranty, engineering and applications support may be continued by taking out a service and/or calibration contract.
Calibration procedures are based on ISO 17025 and many are UKAS (United Kingdom Accreditation Service) approved.
Please ask us for more details.
AFTER SALES SERVICES
WASHER
Dry Load Capacity: 8.2kg
Width: 683mm Depth: 649mm Height: 1100mm
Weight: Approx 143kg
Electrical Supply: Single phase 230V 50Hz (3A)
Water Supply: Hot and Cold
Minimum Water Pressure: 1 bar
Minimum Water Temperature: 60±3˚C
Drain Size: 50mm diameter (into1.25m high stand pipe)
DRYER
Dry Load Capacity: 10kg
Width: 686mm Depth: 743mm Height: 1100mm
Weight: Approx 51kg
Electrical Supply: Single phase 230V 50Hz (22A)
Exhaust: 100mm diameter (steel 100mm diameter (steel 100mm diameter ( ducting)
MAIN SPECIFICATIONS
Alternative voltages and frequencies are not presently available
Ancillary EquipmentFOR EUROPEAN & AMERICAN TESTS
TEXPRESS FOR ROTARY IRONING
Fabric that has an easy to iron finish may be ironed
before visual assessment of its appearance.
TEXPRESS complies fully with the requirements of
M & S Test Method P91 and Next Test Method
TM24 for this procedure.
TEXPRESS features precise control of temperature
up to 200˚C and a constant roller speed of 2 metres
per minute.
FASTPRESS FOR PRESS DRYING
Retailers and test methods both in Europe and
the USA give the choice to press dry.
FASTPRESS meets this need and is generally
accepted for this procedure.
M & S VIEWING BOARD FOR ASSESSING APPEARANCEM & S tests to assess creasing and appearance of
easy to iron fabrics and garments require standard
assessment conditions that comply with the M & S
specifications.
The M & S VIEWING BOARD fully complies
with the specification for M & S Test Method P91
and P134.
Dimensions: width 1130mm, depth 385mm,
height 1880mm.
AATCC VIEWING BOARD FOR ASSESSING APPEARANCEUSA tests to assess creasing and appearance of fabrics
and garments require standard assessment conditions
that comply with AATCC specifications.
The AATCC VIEWING BOARD meets the needs of
retailers who use the AATCC Test Methods.
Dimensions: Wall mounted: width 1830mm,
depth 270mm, height 1830mm.
Mobile: width 1940mm,
depth 1360mm, height 2445mm.
990-117 Wascator FOM71 CLS – 3 phase & neutral 400V 50Hz
990-118 Wascator FOM71 CLS – 3 phase 220V 60Hz Pre-programmed for EN ISO 6330 : 2000 and EN 26330 : 1993 & ISO 6330 : 1984
202-416/71 CLS UKAS Certificate of Calibration for Wascator 71 CLS
745-020 M & S Programme (English) – excluding MSTD and P5A For approved M & S Suppliers only
745-027 M & S Programme (English) P5AFor approved M & S Suppliers only
902-505 Accudry Standardised Laboratory Tumble Dryer – 230V 50Hz202-417 UKAS Certificate of Calibration for Accudry UKAS Certificate of Calibration for Accudry UKAS Certificate of Calibration for Accudry
990-106 Fastpress Flat Bed Press – 230V 50/60Hz
907-650 Texpress Standardised Rotary Iron – 230V 50/60Hz
201-656 ISO Certificate of Calibration for Texpress
794-903 Temperature Measuring KitMandatory for M & S testing
708-900 M & S Viewing Board – 230V 50/60HzFor approved M & S suppliers only
708-899 M & S Viewing Board – 110V 60HzFor approved M & S suppliers only
708-967 Set (3) Spare Lamps
EQUIPMENT – EUROPEAN
772-106 Shrinkage Template (BS and ISO)772-103 Shrinkage Template (M & S)772-135 Shrinkage Template (Next)201-108 ISO Certificate of Calibration for Shrinkage Template
772-128 Shrinkage Ruler (BS and ISO)772-126 Shrinkage Ruler (M & S)772-136 Shrinkage Ruler (Next)201-109 ISO Certificate of Calibration for BS/ISO and Next Shrinkage Ruler201-110 ISO Certificate of Calibration for M & S Shrinkage Ruler
788-764 Pack (6) 1.2mm Tip Yellow Texpens788-765 Pack (6) 1.2mm Tip Black Texpens
772-134 Steel Ruler – Length : 150mm/6in772-133 Steel Ruler – Length : 300mm/12in772-132 Steel Ruler – Length : 600mm/24in772-131 Steel Ruler – Length : 1000mm/39in
TEMPLATES, RULERS and MARKING PENS – EUROPEAN
How to Order
990-141 Whirlpool/Kenmore Washer – 230V 50Hz
990-140 Whirlpool/Kenmore Dryer – 230V 50HzWhirlpool/Kenmore Dryer – 230V 50HzWhirlpool/Kenmore Dryer
201-141 ISO Certificate of Calibration for Whirlpool/Kenmore Washer
201-140 ISO Certificate of Calibration for Whirlpool/Kenmore Dryer
708-897 AATCC Viewing Board 120 – 230V 50/60HzIncorporating 2 x 1200mm CWF Lamps
708-896 AATCC Viewing Board 240 – 230V 50/60HzIncorporating 2 x 2400mm CWF Lamps
708-898 Optional Mobile StandSuitable for Viewing Boards 120 and 240
708-953 Spare 1200mm CWF Lamp for Viewing Board 120
708-952 Spare 2400mm CWF Lamp for Viewing Board 240
EQUIPMENT – AMERICAN
2Accudry Standardised Laboratory Tumble Dryer2Accudry Standardised Laboratory Tumble Dryer2
772-120 AATCC Shrinkage Scale
772-134 Steel Ruler – Length : 150mm/6in
772-133 Steel Ruler – Length : 300mm/12in
772-132 Steel Ruler – Length : 600mm/24in
772-131 Steel Ruler – Length : 1000mm/39in
706-657 Tub (2kg) Standard Soap – without optical brightener
706-724 Pack (approx 3.5kg) Persil Heavy Duty, Low Lather Detergent – with optical brightenerFor M & S testing (Wascator)
706-652 Tub (2kg) ECE Non-Phosphate Reference Detergent (A) – without optical brightener
706-653 Box (15kg) ECE Non-Phosphate Reference Detergent (A) – without optical brightener
706-735 Pack (250g) TAED (Tetra-acetylethylene diamine) – 92% activity
706-650 Tub (2kg) ECE Phosphate Reference Detergent (B) – without optical brightener
706-651 Box (15kg) ECE Phosphate Reference Detergent (B) – without optical brightener
706-666 Tub (2kg) IEC Non-Phosphate Reference Detergent (A) – with optical brightener
706-667 Box (15kg) IEC Non-Phosphate Reference Detergent (A) – with optical brightener
706-654 Tub (2kg) IEC Reference Detergent (B) – with optical brightener
706-655 Box (15kg) IEC Reference Detergent (B) – with optical brightener
SOAPS and DETERGENTS – EUROPEAN
702-530 Pack (1kg) HEAL’S ISO Polyester MakeweightsComplies with EN 26330:1993, ISO 6330:1984 and Next
203-926 Certificate of Conformity for ISO Makeweights 702-530
702-531 Pack (1kg) HEAL’S ISO Polyester MakeweightsComplies with EN ISO 6330 : 2000
203-927 Certificate of Conformity for ISO Makeweights 702-531
702-402 Pack (1kg) M & S Polyester Makeweights
203-928 Certificate of Conformity for M & S Makeweights
MAKEWEIGHTS (LOADING FABRICS) – EUROPEAN
766-499 Set (5) AATCC Three-Dimensional Crease Appearance Replicas
766-493 Set (2) AATCC Photographs for Single and Double Needle Seams
766-503 Set (6) AATCC Three-Dimensional Seam Appearence (Type B)
766-492 Set (6) AATCC Three-Dimensional Smoothness Appearance (Durable Press) Replicas
PHOTOGRAPHS and REPLICAS – EUROPEAN and AMERICAN
TEMPLATES, RULERS and MARKING PENS – AMERICAN
706-500 Tub (2kg) 1993 Non-Phosphate Reference Detergent – with optical brightener
706-501 Box (15kg) 1993 Non-Phosphate Reference Detergent – with optical brightener
706-502 Tub (2kg) 1993 Non-Phosphate Reference Detergent – without optical brightener
706-503 Box (15kg) 1993 Non-Phosphate Reference Detergent – without optical brightener
SOAPS and DETERGENTS – AMERICAN
702-430 Pack (16) AATCC Ballast Type 1
702-432 Pack (16) AATCC Ballast Type 3
MAKEWEIGHTS (BALLAST) – AMERICAN
MEETING STANDARDS Testing is an important part of any production process and is the only way to ensure that products meet the standards customers require. The test results must be accurate and should correlate with the results from other laboratories.
CONFORMANCE Correct use of the required Test Methods and Standards is critical in order to produce accurate results. Only the machines, accessories and consumables specified in the Test Methods should be used. Our policy is always to supply exactly what is needed to conform to the Test Methods and Standards.
CALIBRATION Testing machines must perform consistently in order for them to produce accurate results. HEALS offer calibrated machines and will verify the performance of machines before delivery. HEALINK offers Servicing and Calibration in the field.
CONSISTENCY For washing tests, it is important to have a consistent machine load, consistent water quantity, accurate CONSISTENCY For washing tests, it is important to have a consistent machine load, consistent water quantity, accurate CONSISTENCYtemperature control and to use the corre-ct detergent.
For tumble drying, it is also important to have consistency. Load size, temperature, clean lint filters and correct cooling cycle are critical to allow accurate calculation of shrinkages.
Consistent conditions also give accurate results for Press Drying, Line Drying, Flat Drying and Drip Drying.
APPEARANCE Assessing appearance and creases after washing is very difficult. Correct viewing arrangements and the correct environment are critical for accuracy. HEAL’S technical support staff can advise on the techniques needed for these assessments.
TEST STANDARDS These principles are the same whether the customer is using European ISO Test Methods or the USA’s AATCC Test Methods.
In general, Europe and the USA use different machines, accessories and consumables for washing tests. Because of this, the treatment of the fabrics or garments is different. This means that it is very difficult to accurately correlate the results obtained from European ISO tests with those from the USA’s AATCC tests.
RETAILERS Some retailers, for example Marks and Spencer in the UK, have developed their own Test Methods and Procedures. They may also specify the machines, accessories and consumables that can be used for their testing. These procedures must be followed for the retailers in question and HEAL’S technical support staff will be happy to advise on all of these aspects.
CONFIRMING QUALITY Accurate washing tests give dyers and finishers control over their processes.CONFIRMING QUALITY Accurate washing tests give dyers and finishers control over their processes.CONFIRMING QUALITY
For products washed by the garment and product maker, washing test results help to ensure that garments and products are of the correct size, when they are delivered to the Retailer.
Washing test results are also used to ensure that, when the customer buys a garment or product, it will not shrink when it is washed in the home.
Assessing the non-iron, easy to iron appearance of the product after washing is often an important part of a finished product specification.
HEALS offer all of the items necessary to accurately assess these aspects of a fabric, garment or product’s performance.
Richmond Works, Halifax, West Yorkshire HX3 6EP, England. Tel: +44 (0) 1422 366355. Fax: +44 (0) 1422 352440.E-mail: [email protected] Internet: http://www.james-heal.co.uk
We reserve the right to alter the specification or modify the appearance without notice.
© James H. Heal & Co. Ltd 2007
Testing Procedures