Download - Wood Bike 2
-
8/9/2019 Wood Bike 2
1/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 1/16
Wood Bike 2
[1]
http://cdn.instructables.com/F5O/JIWW/GN4CZWJF/F5OJIWWGN4CZWJF.LARGE.jpg -
8/9/2019 Wood Bike 2
2/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 2/16
[2]
http://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpg -
8/9/2019 Wood Bike 2
3/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 3/16
[3]
[4]
[5]
[6]
Show All 10 Items
I got into wood bikes recently. I made Wood bike 1 and then have been looking on the
net and elswhere for ideas for number 2. I found one on this site that I loved
http://www.instructables.com/id/Bent-Plywood-Bicycle/[7]. This bike and others
inspired me to make my own bent bike. I am fairly competent with tools and have a lot
of bits and pieces in my shed.
It took me 3 full days and cost about $100 and a donor bike. I have a bit of tidying up
to do but its pretty much finished.
Remove these ads by Signing Up[8]
Step 1: Getting started.
http://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://www.instructables.com/id/Wood-Bike-2/?ALLSTEPS#more-anchorhttp://cdn.instructables.com/FNZ/ME5Y/GN4CZWJE/FNZME5YGN4CZWJE.LARGE.jpghttp://www.instructables.com/id/Bent-Plywood-Bicycle/http://cdn.instructables.com/FMH/0YSY/GN4CZF1B/FMH0YSYGN4CZF1B.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://www.instructables.com/account/gopro?sourcea=removeads&nxtPgName=Wood+Bike+2&nxtPg=/id/Wood-Bike-2/?ALLSTEPShttp://cdn.instructables.com/FUU/TBNQ/GN4CZF15/FUUTBNQGN4CZF15.LARGE.jpg -
8/9/2019 Wood Bike 2
4/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 4/16
[9]
[10]
[11]
First I got a bit of ChipBoard big enough to fit the bike on and make my bending jig.
Then I put my bike on it and traced the frame with a pencil. Once I had an outline Iused a bendy bit of yellow plastic to work out the curves that I like. I used a couple of
screws to hold it into place while tracing
I had a $20 donor bike and decided to copy the frame geometry. I think its a fairly good
bike but its about to cease to exist.
Step 2: Supplies and my Jig
http://cdn.instructables.com/F6L/WP07/GMVSCYMK/F6LWP07GMVSCYMK.LARGE.jpghttp://cdn.instructables.com/FJ2/86XE/GMVSC5KO/FJ286XEGMVSC5KO.LARGE.jpghttp://cdn.instructables.com/FDH/KTIM/GMIGHX14/FDHKTIMGMIGHX14.LARGE.jpg -
8/9/2019 Wood Bike 2
5/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 5/16
[12]
I went to the hardware shop and found a 4 x 8 sheet of 4mm Hardwood bracing ply.
Also 2m of 20mm x 45mm pine to make my bending jig.
The pine I then cut into +\- 150 mm pieces as the uprights on my jig. I then screwed
them to my jig with 2 big screws each and some glue. They have to be fairly strong
because thats what the first layer will be clamped to.
The pic below is just a pic of the jig with a mock up bend just to see if I had enough
clamps. Wel as it turns out I dont have enough clamps- YOU CAN NEVER HAVE
ENOUGH CLAMPS.
Step 3: Cut and laminate
http://cdn.instructables.com/FN7/1201/GMVSD06F/FN71201GMVSD06F.LARGE.jpg -
8/9/2019 Wood Bike 2
6/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 6/16
[13]
[14]
[15]
[16]
Today I drew the shapes i want on one piece of ply and screwed 5 together. Then I cut
out the shape with a circular saw and a router for the tricky bits.
I laminated the both sides separately . As I'm using steel for the connections I can
laminate in 2 halves and dont have to do them in one go.
I used 5 layers of 4mm ply and that got me to 24mm total thickness. I used PVA white
glue as it's cheap and I had some. The glue was painted on thick till the complete
surface was covered and then I just clamped them on one by one. After about an hour
each time I just stuck some screws in from the back to hold the last piece in place,
http://cdn.instructables.com/FUI/PP00/GMYN9U9V/FUIPP00GMYN9U9V.LARGE.jpghttp://cdn.instructables.com/F68/W1IV/GMVSD4SS/F68W1IVGMVSD4SS.LARGE.jpghttp://cdn.instructables.com/FWV/VRR1/GMYNAPAQ/FWVVRR1GMYNAPAQ.LARGE.jpghttp://cdn.instructables.com/FB3/461S/GMX1Q2VG/FB3461SGMX1Q2VG.LARGE.jpg -
8/9/2019 Wood Bike 2
7/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 7/16
took the clamps off and glued another one on.
The right way would probably be to wait a day between layers. Its amazing but after
the 3rd one I released all the clamps just to see what would happen and it kept its
shape. This is the first time I bent wood and although I know it works it still blew me
away.
Its all drying in the shed overnight.
Step 4: Release the clamps and sanding
[17]
The curves were released from the mould today. There was a lot of sanding and
planing and routering but I finally got them smooth.
I used and electric plane and a belt sander.
I also started working on the steel bracket that will connect the top and bottom curves
to the steering head.
http://cdn.instructables.com/F7W/JOF5/GMX1Q2VI/F7WJOF5GMX1Q2VI.LARGE.jpg -
8/9/2019 Wood Bike 2
8/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 8/16
Step 5: Chop it up.
[18]
[19]
[20]
This is the part where I chop up the old bike to get the bits I need. I would wear gloves,
glasses and ear protection as a minimum when working with a grinder.
Firstly I cut the dropouts off. Thats the bits where the back wheels connect to the
frame. Save them for later.
Now I started cutting out the bottom bracket with the seat tube still attached. I use a
125mm angle grinder with a 1mm cutoff disk. It slices like a hot knife through butter.Then I cut the steering neck out as well, while removing brakes and cables and things
as I run into them.
http://cdn.instructables.com/F1C/E6PT/GMYN9UCK/F1CE6PTGMYN9UCK.LARGE.jpghttp://cdn.instructables.com/F73/93YV/GMX1Q2WF/F7393YVGMX1Q2WF.LARGE.jpghttp://cdn.instructables.com/F6Q/O6UZ/GMX1V9D7/F6QO6UZGMX1V9D7.LARGE.jpg -
8/9/2019 Wood Bike 2
9/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 9/16
In the last photo is the result of what I had left over. It took about 1 hour to grind all
the welds off and smooth it all over. I then hit all the grinds with a bit of grey primer
as i live at the beach and it will rust almost over night.
Step 6: Fabrication
[21]
[22]
[23]
[24]
Today was a big one, about 7 hours on the bike. I had some bits of 2mm plate so I cut
some pieces out to make an attachment bracket for the steering head. After lots of
cutting, grinding and halfround filing I was ready for welding.
http://cdn.instructables.com/FCC/6RC6/GMYNB097/FCC6RC6GMYNB097.LARGE.jpghttp://cdn.instructables.com/FZ3/1OZI/GMYN9YI7/FZ31OZIGMYN9YI7.LARGE.jpghttp://cdn.instructables.com/FM2/GT7A/GMX1Q9KE/FM2GT7AGMX1Q9KE.LARGE.jpghttp://cdn.instructables.com/FEH/7E86/GMX1Q9KH/FEH7E86GMX1Q9KH.LARGE.jpg -
8/9/2019 Wood Bike 2
10/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 10/16
All my angles were worked out very loosely by holding all the pieces on the ground
and tracing it on the floor with a pencil, then transfer to paper. I then cut out the
paper and transfered to steel plate for cutout.
So I cut the 3 pieces out and welded them all together to the steering head tube.
Step 7: Dropout brackets
[25]
[26]
[27]
[28]
http://cdn.instructables.com/F45/CJJQ/GMYNB0BS/F45CJJQGMYNB0BS.LARGE.jpghttp://cdn.instructables.com/F62/VZNK/GMX1Q9L2/F62VZNKGMX1Q9L2.LARGE.jpghttp://cdn.instructables.com/FX3/NN6S/GMYN9YK5/FX3NN6SGMYN9YK5.LARGE.jpghttp://cdn.instructables.com/FAV/VZG9/GMYN9YJ3/FAVVZG9GMYN9YJ3.LARGE.jpg -
8/9/2019 Wood Bike 2
11/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 11/16
For the dropout brackets I had to do some Blacksmithing. First I drew it up roughly on
the ground again and transferred to paper.
Now remember when I cut off the dropouts before and told you to save them for later.
Well this is later. I cut out the shape out of plate and bent, blowtorched and
hammered till I had these brackets. I then welded it all together and also welded the
dropouts on.
I probably should have approached this more scientifically but...
A bit of primer paint after welding is always a good idea.
Step 8: Assembly
[29]
[30]
http://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpghttp://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpghttp://cdn.instructables.com/FB4/2A59/GMYNB0DF/FB42A59GMYNB0DF.LARGE.jpghttp://cdn.instructables.com/F3V/7GI0/GMYN9YKJ/F3V7GI0GMYN9YKJ.LARGE.jpg -
8/9/2019 Wood Bike 2
12/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 12/16
[31]
[32]
This is where I started screwing things together. I used 20mm wood screws for testing
but I now replaced them with 6mm bolts with nylocker nuts. I had to do a fair bit oftrimming on the frame to make it all fit. The wheel hit the sides and I had to adjust the
brackets a bit. I didn't spend too much time measuring things I just kindof made it up
and adjusted where needed.
Other than that it all went together nicely.
Step 9: Seatpost and bottom bracket
[33]
[34]
http://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpghttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpghttp://cdn.instructables.com/FV4/LB80/GMYNB0DH/FV4LB80GMYNB0DH.LARGE.jpghttp://cdn.instructables.com/FHZ/M633/GMYN9UCG/FHZM633GMYN9UCG.LARGE.jpg -
8/9/2019 Wood Bike 2
13/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 13/16
For the seatpost I drilled a 28mm hole in the top beam. On the bottom of the bottom
bracket I welded a mounting plate that you can see in the second photo. I forgot to
take a photo as I made it. I then stuck the seatpost tube through the hole from
underneath and screwed the mounting plate to the bottom beam.
I am making a little wooden box to cover the ugly bottom bracket. I still need to do
another couple of coats of varnish and back brakes and front derauler. Other than that
the bike is done and very strong.
I then put all the bike bits on and it was test drive time. I had to stop a couple of times
for adjustments but it felt very strong. At first I let the seatpost slide through the top
beam so all my weight pressed on the bottom beam only. It was nice and springy but
not in a good way. There was no shock absorbtion and it didn't improve the ride at all
just very bouncy. I didnt like it so I put a couple of screws in to stop the seatpost from
sliding. The bike now feels solid to ride and I gave it heaps of testing: Up and down
pavements, wheelies, stoppies, top speed down the road , 150kg load test. Its all
holding up.
Step 10: Photos
http://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpghttp://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpg -
8/9/2019 Wood Bike 2
14/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 14/16
1. http://cdn.instructables.com/F5O/JIWW/GN4CZWJF/F5OJIWWGN4CZWJF.LARGE.jpg
2. http://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpg
3. http://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpg
4. http://cdn.instructables.com/FMH/0YSY/GN4CZF1B/FMH0YSYGN4CZF1B.LARGE.jpg
5. http://cdn.instructables.com/FNZ/ME5Y/GN4CZWJE/FNZME5YGN4CZWJE.LARGE.jpg
6. http://cdn.instructables.com/FUU/TBNQ/GN4CZF15/FUUTBNQGN4CZF15.LARGE.jpg
7. http://www.instructables.com/id/Bent-Plywood-Bicycle/
8. http://www.instructables.com/account/gopro?
sourcea=removeads&nxtPgName=Wood+Bike+2&nxtPg=/id/Wood-Bike-2/?
ALLSTEPS
9. http://cdn.instructables.com/FJ2/86XE/GMVSC5KO/FJ286XEGMVSC5KO.LARGE.jpg
10. http://cdn.instructables.com/FDH/KTIM/GMIGHX14/FDHKTIMGMIGHX14.LARGE.jpg
[35]
[36]
[37]
[38]
[39]
[40]
Show All 9 Items
Some photos and one of woodbike1 as well.
Links
http://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpghttp://www.instructables.com/id/Bent-Plywood-Bicycle/http://cdn.instructables.com/F5O/JIWW/GN4CZWJF/F5OJIWWGN4CZWJF.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpghttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://www.instructables.com/id/Wood-Bike-2/?ALLSTEPS#more-anchorhttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://cdn.instructables.com/FUU/TBNQ/GN4CZF15/FUUTBNQGN4CZF15.LARGE.jpghttp://cdn.instructables.com/FNZ/ME5Y/GN4CZWJE/FNZME5YGN4CZWJE.LARGE.jpghttp://www.instructables.com/account/gopro?sourcea=removeads&nxtPgName=Wood+Bike+2&nxtPg=/id/Wood-Bike-2/?ALLSTEPShttp://cdn.instructables.com/FJ2/86XE/GMVSC5KO/FJ286XEGMVSC5KO.LARGE.jpghttp://cdn.instructables.com/FIP/LGKJ/GN02OZAP/FIPLGKJGN02OZAP.LARGE.jpghttp://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpghttp://cdn.instructables.com/FDH/KTIM/GMIGHX14/FDHKTIMGMIGHX14.LARGE.jpghttp://cdn.instructables.com/FMH/0YSY/GN4CZF1B/FMH0YSYGN4CZF1B.LARGE.jpg -
8/9/2019 Wood Bike 2
15/16
22/1/2015 Wood Bike 2
chrome-extension://iooicodkiihhpojmmeghjclgihfjdjhj/in_isolation/reformat.html 15/16
11. http://cdn.instructables.com/F6L/WP07/GMVSCYMK/F6LWP07GMVSCYMK.LARGE.jpg
12. http://cdn.instructables.com/FN7/1201/GMVSD06F/FN71201GMVSD06F.LARGE.jpg
13. http://cdn.instructables.com/FB3/461S/GMX1Q2VG/FB3461SGMX1Q2VG.LARGE.jpg
14. http://cdn.instructables.com/F68/W1IV/GMVSD4SS/F68W1IVGMVSD4SS.LARGE.jpg
15. http://cdn.instructables.com/FUI/PP00/GMYN9U9V/FUIPP00GMYN9U9V.LARGE.jpg
16. http://cdn.instructables.com/FWV/VRR1/GMYNAPAQ/FWVVRR1GMYNAPAQ.LARGE.jpg
17. http://cdn.instructables.com/F7W/JOF5/GMX1Q2VI/F7WJOF5GMX1Q2VI.LARGE.jpg
18. http://cdn.instructables.com/F6Q/O6UZ/GMX1V9D7/F6QO6UZGMX1V9D7.LARGE.jpg
19. http://cdn.instructables.com/F1C/E6PT/GMYN9UCK/F1CE6PTGMYN9UCK.LARGE.jpg
20. http://cdn.instructables.com/F73/93YV/GMX1Q2WF/F7393YVGMX1Q2WF.LARGE.jpg
21. http://cdn.instructables.com/FZ3/1OZI/GMYN9YI7/FZ31OZIGMYN9YI7.LARGE.jpg22. http://cdn.instructables.com/FEH/7E86/GMX1Q9KH/FEH7E86GMX1Q9KH.LARGE.jpg
23. http://cdn.instructables.com/FM2/GT7A/GMX1Q9KE/FM2GT7AGMX1Q9KE.LARGE.jpg
24. http://cdn.instructables.com/FCC/6RC6/GMYNB097/FCC6RC6GMYNB097.LARGE.jpg
25. http://cdn.instructables.com/FAV/VZG9/GMYN9YJ3/FAVVZG9GMYN9YJ3.LARGE.jpg
26. http://cdn.instructables.com/F45/CJJQ/GMYNB0BS/F45CJJQGMYNB0BS.LARGE.jpg
27. http://cdn.instructables.com/FX3/NN6S/GMYN9YK5/FX3NN6SGMYN9YK5.LARGE.jpg
28. http://cdn.instructables.com/F62/VZNK/GMX1Q9L2/F62VZNKGMX1Q9L2.LARGE.jpg
29. http://cdn.instructables.com/F3V/7GI0/GMYN9YKJ/F3V7GI0GMYN9YKJ.LARGE.jpg
30. http://cdn.instructables.com/FB4/2A59/GMYNB0DF/FB42A59GMYNB0DF.LARGE.jpg
31. http://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpg
32. http://cdn.instructables.com/FV4/LB80/GMYNB0DH/FV4LB80GMYNB0DH.LARGE.jpg
33. http://cdn.instructables.com/FHZ/M633/GMYN9UCG/FHZM633GMYN9UCG.LARGE.jpg
34. http://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpg
35. http://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpg
36. http://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpg
37. http://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpg
38. http://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpg
39. http://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpg
40. http://cdn.instructables.com/FIP/LGKJ/GN02OZAP/FIPLGKJGN02OZAP.LARGE.jpg
http://cdn.instructables.com/FCC/6RC6/GMYNB097/FCC6RC6GMYNB097.LARGE.jpghttp://cdn.instructables.com/F7W/JOF5/GMX1Q2VI/F7WJOF5GMX1Q2VI.LARGE.jpghttp://cdn.instructables.com/FB4/2A59/GMYNB0DF/FB42A59GMYNB0DF.LARGE.jpghttp://cdn.instructables.com/F6L/WP07/GMVSCYMK/F6LWP07GMVSCYMK.LARGE.jpghttp://cdn.instructables.com/F1C/E6PT/GMYN9UCK/F1CE6PTGMYN9UCK.LARGE.jpghttp://cdn.instructables.com/FN7/1201/GMVSD06F/FN71201GMVSD06F.LARGE.jpghttp://cdn.instructables.com/F3V/7GI0/GMYN9YKJ/F3V7GI0GMYN9YKJ.LARGE.jpghttp://cdn.instructables.com/FUI/PP00/GMYN9U9V/FUIPP00GMYN9U9V.LARGE.jpghttp://cdn.instructables.com/F62/VZNK/GMX1Q9L2/F62VZNKGMX1Q9L2.LARGE.jpghttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://cdn.instructables.com/FDI/T973/GN02QRWL/FDIT973GN02QRWL.LARGE.jpghttp://cdn.instructables.com/FX3/NN6S/GMYN9YK5/FX3NN6SGMYN9YK5.LARGE.jpghttp://cdn.instructables.com/FAV/VZG9/GMYN9YJ3/FAVVZG9GMYN9YJ3.LARGE.jpghttp://cdn.instructables.com/F0K/TOU2/GN02OZAS/F0KTOU2GN02OZAS.LARGE.jpghttp://cdn.instructables.com/FZ3/1OZI/GMYN9YI7/FZ31OZIGMYN9YI7.LARGE.jpghttp://cdn.instructables.com/FV4/LB80/GMYNB0DH/FV4LB80GMYNB0DH.LARGE.jpghttp://cdn.instructables.com/FBJ/PJO3/GMX1Q9LX/FBJPJO3GMX1Q9LX.LARGE.jpghttp://cdn.instructables.com/FSF/BD06/GN02QRWZ/FSFBD06GN02QRWZ.LARGE.jpghttp://cdn.instructables.com/FM2/GT7A/GMX1Q9KE/FM2GT7AGMX1Q9KE.LARGE.jpghttp://cdn.instructables.com/FWV/VRR1/GMYNAPAQ/FWVVRR1GMYNAPAQ.LARGE.jpghttp://cdn.instructables.com/FB3/461S/GMX1Q2VG/FB3461SGMX1Q2VG.LARGE.jpghttp://cdn.instructables.com/FIP/LGKJ/GN02OZAP/FIPLGKJGN02OZAP.LARGE.jpghttp://cdn.instructables.com/FHZ/M633/GMYN9UCG/FHZM633GMYN9UCG.LARGE.jpghttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://cdn.instructables.com/F45/CJJQ/GMYNB0BS/F45CJJQGMYNB0BS.LARGE.jpghttp://cdn.instructables.com/FEH/7E86/GMX1Q9KH/FEH7E86GMX1Q9KH.LARGE.jpghttp://cdn.instructables.com/F73/93YV/GMX1Q2WF/F7393YVGMX1Q2WF.LARGE.jpghttp://cdn.instructables.com/F6Q/O6UZ/GMX1V9D7/F6QO6UZGMX1V9D7.LARGE.jpghttp://cdn.instructables.com/FNB/QL8V/GMX1QGF3/FNBQL8VGMX1QGF3.LARGE.jpghttp://cdn.instructables.com/F68/W1IV/GMVSD4SS/F68W1IVGMVSD4SS.LARGE.jpg -
8/9/2019 Wood Bike 2
16/16
22/1/2015 Wood Bike 2
Obtenez un compte Evernote gratuit pour
enregistrer cet article et le lire plus tard sur
n'importe quel appareil.
Crer un compte