Download - Yamaha R1 Paper Assembly-complete
Thank you for downloading the "YZF-R1" paper craft model. By simplyfollowing this manual while referring to the names and numbers shown on the
parts sheets, you can assemble an authentic-looking replica of the YZF-R1.
Assembly instructions: Fifteen A4-sized sheets.Paper craft: Fourteen A4-sized sheets with 170 parts in all
PAPER CRAFTAssembly Instructions
These instructions apply only to the "YZF-R1".These Paper Craft parts are easier to work with when printed out on strong,thick paper (like postcard stock).*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).
- 2 -
Note
TO BEGIN
Item of Caution*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size as there
are many differences in dimensions depending on the
type of printer used.
Tools and materials needed-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or
other pointed tool (for making a folding crease) - Felt
pen - Pin set - Glue - Hand towel ( for cleaning your
fingers) - Dictionary or other heavy book ( to press the
papers flat)
HOW TO ASSEMBLE
*Follow the working method and markings carefully.
*Cut carefully along the outter line with a cutting blade,
Exacto-knife or scissors.
*Cut carefully with a cutting blade, Exacto-knife orscissors.
*For folding parts, first use an awl or other pointedtool to make a light crease along the dotted or solidline. This will make the folds straight. Avoid makingstrong creases, as this will cause the paper to tear.
*As an adhesive, white, wood glue is recommended.Avoid over application as this will cause the paperto wrinkle.
*Before beginning assembly, test adhesive amountson extra paper.
*Occasionally, white spots will be apparent on foldsand cuts. Use a marker or pencil to fill-in these spots.It is recommended that this be done after each stageof assembly because coloring becomes more diffi-cult once parts are assembled.
One - point Advice
Basic working method and markings
Fold along these lines. The printed
surface should be on the outside of
the folded shape.
Solid lines
Dotted line
Fold along these lines. The printed
surface should be on the inside of
the folded shape.
Broken lines
Cut out parts marked with an as-
terisk(*).
Cut along these lines
Red dots are the reference positions
for gluing surfaces.
- 3 -
A-1
A-1
A-2
A-3
A-5A-4
A-6
A-7A-8
A-9A-10
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
1 Assembling the Front Cowl
Reference photo
Fold the parts as shown above so that the dotted lines onthe gluing surfaces are lined up before gluing each sec-tion.
Glue this section fromthe inside of A-1.
FRONT COWLSheet A, 10 parts in total
Please use the dots on each component as reference when gluing surfaces.
- 4 -
B-1B-2
B-3B-4
B-7B-6
B-5
B-8
B-9
B-11B-10
B-13B-12
B-18
B-14B-15
B-16B-17
B-18
Fold the parts as shown above so thatthe dotted lines on the gluing surfacesare lined up before gluing each section.
Reference photo
Be careful not to leave any glue on B-5,8 and 9 when inserting B-10 and 11.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
2 Assembling the Steering
STEERINGSheet B, 18 parts in total
Apply glue on the areaindicated in the illustration.
Please use the dots on each component as
reference when gluing surfaces.
- 5 -
C-1
C-1
C-3
C-5
C-4C-2
C-7
C-8
C-11 C-12
C-9
C-10
C-15C-16C-17C-13C-14
C-23
After assembling both Frames A and B, glue the two on the gluing surface shown below.
Gluing surface (to Frame B)
Be sure to assemble inthe right direction
C-6
Fold the parts as shown above so thatcorresponding gluing areas are lined upbefore gluing each section.
Crease well in this area onboth sides of the component.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
3 Assembling the Frame
FRAMESheet C (x2), 23 parts in total
[Frame A]
Gluing surface (to Frame A)
[Frame B]
Be sure to assemble inthe right direction
Be sure to assemble inthe right direction
Reference photo
Please use the dots on each component as reference when gluing surfaces.
C-18C-19C-20C-21C-22
- 6 -
D-1
D-2
D-3
D-4
D-1
D-2Reference photo
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
4 Assembling the Fuel Tank
FUEL TANKSheet D 4 parts in total
Fold the parts as shown above so thatthe dotted lines on the gluing surfacesare lined up before gluing each section.
Fold the parts as shown above so that the dotted lines onthe gluing surfaces are lined up before gluing each sec-tion.
Please use the dots on each component as
reference when gluing surfaces.
E-1
E-2
E-3
E-4
E-5E-6E-7E-8
E-11
E-14
E-15
E-12
E-13
E-16
E-17
E-18
E-19E-20 E-21
E-22
E-23
E-24
E-25E-26
ENGINESheet E, 26 parts in total
- 7 -
5 Assembling the Engine
E-9E-10
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
Please use the dots on each component as reference when gluing surfaces.
- 8 -
F-1
F-2
F-3
F-4
F-5
F-6
F-7
F-8
F-9
F-10F-11 F-12
F-13 F-14
Gluing area
Reference photo
UNDER COWLSheet F, 14 parts in total
Adhere
6 Assembling the Under CowlFirst, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve
Glue this section from the inside of F-7
Glue this section from theinside of F-8
Glue this sectionfrom the inside ofF-1
Glue this section from theinside of F-1
Glue this section from theinside of F-1
Glue this section from theinside of F-1
Apply glue in the areaindicated with blue dottedlines and attach them tothe back of F-7 and F-8.
Please use the dots on each component as reference when gluing surfaces.
- 9 -
G-17
G-1G-2G-3G-4
G-9G-10
G-13G-14
G-5G-6G-7G-8
G-11G-12
G-15G-16
G-18
G-19
G-20
G-21
G-22
G-23
G-24G-25
G-26
[Exhaust A]
After assembling both Exhaust Pipes A and B, glue the two on the gluing surface shown below.
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
7 Assembling the Exhaust
Reference photo
EXHAUSTSheet G, 26 parts in total
When assembling G-1 through G-8, refer to the photo of the finished modelbelow to assemble them with the right angles.
When assembling G-18, 19, and 20, refer to the photoof the finished model below to assemble them withthe right angles.
Gluing surface(to Exhaust A)
Gluing surface(to Exhaust B)
[Exhaust B]
Apply glue on the areaindicated in the illustration.
Apply glue on the areaindicated in the illustration.
Please use the dots on each component as reference when gluing surfaces.
- 10 -
H-2
H-4
H-5
H-3
H-6
H-11
H-7H-8H-9H-10
Assembly Instructions
H-1
Reference photo
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
8 Assembling the Rear Arm
REAR ARMSheet H, 11 parts in total
Follow the step-by-step assembly instructions shown below.1 2 3
Glue H-1 and H-2 together.
After assembling H-3 through the arm of H-1 as shownin the illustration, glue H-3 to H-1 and H-2.
Glue H-6 to H-1.
Glue H-4 to H-1. H-4 should straddle H-3 and H-6.
Refer to the illustration to assemble other parts.
Please use the dots on each component as reference when gluing surfaces.
- 11 -
I-1
I-2
I-3
I-4
I-5
I-6I-7
I-8 I-9
I-10
I-11I-12
I-13
I-1 I-2
Reference photo
SEAT COWLSheet I, 13 parts in total
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
9 Assembling the Seat Cowl
Fold the parts as shown above so that the dotted lines onthe gluing surfaces are lined up before gluing each sec-tion.
Please use the dots on each component as reference when gluing surfaces.
J-1
J-2
J-3
J-4
J-5
J-6
L-2L-1
L-4L-5L-6
[Front Tire]
Insert the assembled wheel in the assembled tire before gluing them together.FRONT TIRESheet J & L, 12 parts in total
- 12 -
L-3
K-1
K-2
K-3
K-4
K-5
K-6
L-9L-10L-11
L-8 L-7
L-12L-13
Gluing areaAssemble J-2 in thesame manner
First, assemble each component by following theworking method and markings. Then, refer to the il-lustration and photos below to glue the parts together.
Indication ofWorking Methods Fold or Curve Adhere
10 Assembling the Front and Rear Tires
[Front Wheel]
REAR TIRESheet K & L, 13 parts in total
Insert the assembled wheel in the assembled tire before gluing them together.
[Rear Tire] [Rear Wheel]
Reference photo
Reference photo
Gluing areaAssemble J-1 in thesame manner
Gluing areaAssemble K-2 in thesame manner
Gluing areaAssemble K-1 in thesame manner
Please use the dots on each component as reference when gluing surfaces.
Please use the dots on each component as reference when gluing surfaces.
glue the assembled parts in numerical order through .
- 13 -
11 Finish
Assembly Instruction
Detailed Instructions for Assembling theFrame and the Seat Cowl
Gluing area
Apply gluein the back
After inserting the frame inthe Seat cowl up to the reddotted lines, glue the twotogether from theinside.
Insert the frame up tothese red dotted lines.
Ŷ
Steering
Front Cowl
Under Cowl
Front Tire
Frame
Fuel Tank
Exhaust
Engine
Rear Arm
Rear Tire
Seat Cowl
Please use the dots on each component as reference when gluing surfaces.
- 14 -
12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
RIGHT FRONT
G-1G-2G-3G-4G-5G-6
G-7G-8G-9G-10G-11G-12
G-13G-14G-15G-16G-17G-18
G-19G-20G-21G-22G-23G-24
G-19G-20G-21G-22G-23G-24
J-1J-2J-3J-4J-5J-6
J-7J-8J-9J-10J-11J-12
G-25G-26
I-1I-2I-3I-4
I-9I-10I-11I-12I-13
I-5I-6I-7I-8
B-1B-2B-3B-4B-5B-6
B-7B-8B-9B-10B-11B-12
B-13B-14B-15B-16B-17
D-1D-2
D-3D-4
A-1A-2A-3A-4A-5
A-6A-7A-8A-9A-10
Exhaust
Seat Cowl
Front Tire
Fuel Tank
Steering
Front Cowl
- 15 -
LEFT REAR
E-1E-2E-3E-4E-5E-6
E-7E-8E-9E-10E-11E-12
E-13E-14E-15E-16E-17E-18
E-19E-20E-21E-22E-23E-24
E-19E-20E-21E-22E-23E-24
K-1K-2K-3K-4K-5K-6
K-7K-8K-9K-10K-11K-12
E-25E-26F-1
F-2F-3
F-4F-5F-6
F-7F-8F-9
F-10F-11F-12
F-13F-14
C-1C-2C-3C-4C-5C-6
C-7C-8C-9C-10C-11C-12
C-13C-14C-15C-16C-17C-18
C-19C-20C-21C-22C-23
H-1H-2H-3
H-4H-5H-6
H-7H-8H-9
F-10F-11
12 Assembled Model and the List of PartsPlease refer to the photo below when attaching each component.
Under Cowl
Frame
Engine
Rear Arm
Rear Tire