Downloading the bitstream

Connect parallel port to PC

Downloading the bitstream

Connect power supply to XC40-10XL Board Connect Pin 52 to GND Connect Pin 54 to 3.3 V Connect Pin 2 to 5 V Set Bios to ECP Install the XSTOOLs software utility

Downloading the bitstream

Type “xssetclk xs40-010xl 100” in DOS

Downloading the bitstream

Place a shunt on the jumper 12(turn off power supply first)

Process downloading Turn off Power supply and remove the shunt

from the jumper 12

Downloading the bitstream

Downloading the bitstream

Use the XS Board Test Utility to test this board

Choose XS40-010XL+ Set port to LPT1

Downloading the bitstream

The 7-segment LED displays “0” and passed the test

Downloading the bitstream

Drag and Drop the bit stream file on the GXSLOAD program

Downloading the bitstream

Test your design