RESUME

Dr. Bhaskar Gupta(PhD)G-224, Sec-23, Sanjay Nagar, GhaziabadUP-201002E-mail: -bhaskar.pics@gmail.com,bhaskar.g@rediffmail.comPhone-0120-2783412®Mobile number 8076862582, 09873951124, 9811206388Skype ID-bhaskar.gupta342016

Career Objective:-To secure a full time position with specific interest in teaching, To be dedicated, innovative, resourceful lecturer who strives to help students to change marginal grades in to good grades and support colleagues and administration in facilitating each student’s social and intellectual growth by creating an atmosphere of mutual respect and open communication.

Experience:- Around 17 years in Teaching (Academic Experience)

Presently working as a Director (Academics) & Professor in Communication Engineering Department and Principal (Diploma courses) in NITRA Technical Campus Ghaziabad (AKTU CODE-802) (Linked to Ministry of Textiles, Govt. Of India) Academic wing of NITRA (Northern India Textiles Research Association) since 01.05.2018.

Professional qualification:-1 B.E. (Electronics and Communication Engineering) from P.C.C.S. Noida (Affiliated

from Rohilkhand University Bareilly) in 2001with First class.

2 M.Tech (Electronics and Communication EngineeringWith 83%) From Gandhi Vidya Mandir University) in 2006 with Honors.

3. Ph.D(2019) in Electronics & Communication Engineering on the topic entitled “Novel approach for human face detection & recognition under complex background conditions based on comparative evaluation of existing techniques” under the guidance of Dr. Ashish Gupta Professor & HOD (ECE), I.T.S. Engineering College from Sri Venkateshwara University,Gajraula,Moradabad,UP.

Administrative Responsibilities-

1. Looking after all student academics related activities.2. Handling all student scholarship work supervision.3. Looking after all admission related work at college level.4. Looking after all AKTU, AICTE approval and affiliation related work.5. Guiding Registrar for all the activities.6. Looking after all online exams in College.7. Worked as a UPSEE-2019 centre superintendent and IITD virtual lab coordinator.8. Presently handling all placement related activities in campus.

Teaching following Courses-:1. Communication Systems2. Analog & Digital Communication3. Satellite Communication4. Optical Fiber Communication5. Antenna & Wave Propagation6. Microwave Engineering7. Electromagnetic Field Theory8. Wireless Comunication9. Data Communication

Scientific Publications:1. Journal Papers(20) with Good Impact factor2. Conference Papers(15)(Both International & National)

Research Interests are:

1. Digital Signal Processing2. Communication Engineering

Current emoluments- 80,000/- (Including furnished house and car) per month.

International Teaching Assignments-

1. Worked as Lecturer in Electronics and Tele-communication Engineering department in Ibra College of Technology (Government College, Ministry of Manpower, and Directorate General of Technical Education), Al Sharqiyah North Governorate, Ibra, Sultanate of Oman.

2. Worked as an Associate Professor in electrical and computer engineering

department of engineering and technology college of Wollega university, Nekemte campus, Nekemte(Oromia region), P.O. Box-395, Ethiopia(East Africa) since October 2017.

3. Worked as a Director (Engineering) and Principal (Polytechnic) (BTE Code-599) in SSITM Aligarh (UPTU Code-007) for around one year.

a) Worked as a Nodal coordinator for IIT-D virtual lab for SSITM Aligarh.b) Worked as a coordinator for online exams conducted by NSEIT Bombay.

4. Worked as an Associate Professor in Electronics and Tele-communication Engineering department in Ibra College of Technology (Government College, Ministry of Manpower, and Directorate General of Technical Education), Al Sharqiyah North Governorate, Ibra, Sultanate of Oman.

5. Selected by Ball state University for World Bank project in NIMA Afghanistan on gross emoluments of $3000 Dollars for 2014.

6. Selected by the Ministry of Education “sultanate of Oman” for the post of lecturer in college of Technology in the Deptt. Of Electronics and Communication selected me finally in 2007 for session 2007-2008 by Bahwan cybertek consultant Chennai with posting at Muscat (Oman) (College of Technology) with monthly salary of 1600 US Dollars/730-Rial Oman per month.

Papers published in 2016 –

Publications from this research work

[1].Bhaskar Gupta, M.R. Prasad, “Analyzing Face Recognition Using PCA,” 201 4

AKGEC International Journal of Technology, Ghaziabad, UP, India, ISSN 0975-9514,

Jan-June 2014, pp. 5-8 Vol.5 Issue No.1.

[2]. Bhaskar Gupta, M.R. Prasad, “Improved Face Recognition performance Using Eigen

face Algorithm,” 2014 AKGEC International Journal of Technology, Ghaziabad, UP,

India, ISSN 0975-9514, July-Dec 2014, pp. 47-49 Vol.5 Issue No.2.

[3]. Bhaskar Gupta, M.R. Prasad, “Face detection and Recognition survey,” 2015

AKGEC International Journal of Technology, Ghaziabad, UP, India, ISSN 0975-

9514, July-Dec 2015, pp. 47-49 Vol.6 Issue No.2.

[4] Bhaskar Gupta, M.R. Prasad “Eigenface Approach for Face Recognition” in

VSRD International Journal of Technical & Non-Technical Research, Vol. 7,

Issue(Special), Feb 2016.

[5] Bhaskar Gupta, M.R. Prasad “Eigenface Approach for Face Recognition” in

International Conference on Make in India: Where Are We Now & Where to Go (ICMII

2016) Feb 18-19, 2016.

[6] Bhaskar Gupta, M.R. Prasad “Face Detection Using Gabor Filters and Neural

Network” in VSRD International Journal of Technical & Non-Technical Research, Vol.

7, Issue (Special), Feb 2016.

[7] Bhaskar Gupta, M.R. Prasad “Face Detection Using Gabor Filters and Neural

Network” in International Conference on Make in India: Where Are We Now & Where

to Go (ICMII 2016) Feb 18-19, 2016.

Journals Editorial Board-

Selected for the post of editorial borad member of VSRD INTERNATIONAL JOURNALOF ELECTRICAL, ELECTRONICS & COMMUNICATION ENGINEERING(e-ISSN: 2231-3346, p-ISSN: 2319-2232)with NISCAIR IMPACT FACTOR 0.096.

OFELECTRICAL, ELECTRONICS & COMMUNICATION ENGINEERING

(e-ISSN : 2231-3346 , p-ISSN : 2319-2232)

Paper published (2015) – Noisy Character Recognition Using Artificial Neural Network in International Journal of Advanced Research in Computer Science & Technology (IJARCST -Vol. 3, Issue 4 (Oct. - Dec. 2015)ISSN: 2347 - 8446 (Online)ISSN: 2347 - 9817 (Print)Impact factor-0.889

Paper published in AKGEC International Journal of Technology (July-December 2015 Vol. 6, No. 2, ISSN 0975-9514) on Face detection and recognition survey.Published by:Ajay Kumar Garg Engineering College27th km Stone, Delhi-Hapur Bypass Road, PO Adhyatmic Nagar,Ghaziabad 201009 (U.P.) India

M.Tech.Guided-02(1 UTU, Uttarakhand, 01 NIU Gr. NOIDA)

Achievements-2015 Selected two times for colleges of technology and Higher College of technology, Muscat, Oman in 2007 and 2015.

Selected for Ibra College of technology for 2015 batch by Ministry of Manpower in 2015 and for HCT in 2007.

Selected by Ball state University (USA) under World Bank grant project in NIMA Afghanistan as one of the 15 international trainers for ICT Department.

Worked with NIU (Noida International University, Gr.NOIDA) as an Associate Professor and Associate Head (ECE) along with the M.Tech. Project co-ordinator post since 03.08.2015.

1. Worked as a Nodal coordinator for Virtual lab setup in collaboration with Indian Institute of Technology (IIT-D).

2. Worked as a M.Tech. Project coordinator.3. Worked as a Head (Electronics&Communication Engineering Deptt.)

Worked in IIMT college of Engineering Gr.Noida as an Associate Professor in ECE Deptt. Since July 2014.

1. Worked as an IITD virtual lab co-ordinator for IIMT,2. Looked after ISRO outreach programme at IIMT in the capacity of coordinator.

3. Worked on a MSME(Govt. Of India) Project on Electronic eye for blind community.4. Woked on Wipro-10x Mission for faculty development program.5. Coordinated in polytechnique institute for lab developments,compliance reports for

submission.

Worked in BBDIT in ECE Deptt. as Associate Professor since January 2011.

01/08/07-1/2/2011 ABES Engineering College, Ghaziabad on the post of Associate Professor in the scale of UGC in the Deptt. Of Electronics and Communication.Working Profile-1. Looked after optical communication lab.2. Optical networks3. EMFT4. Antenna and wave propagation5. Worked on procurement of various microwave field related soft wares , worked on Micro strip line trainer kit to study power dividers, Branch line couplers and in addition to it I am also working in the direction of procurement of test device like Microwave Power Meter (for absolute power measurement)

3. I have been appointed as a practical Examiner by UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW in following colleges of repute-

A) Bundelkhand Institute on Engineering and Technology, Jhansi (U.P.)B) Noida Institute of Engineering and Technology, Noida (U.P.)C) Krishna Engineering College, Ghaziabad (U.P.)D) S.I.E.T Gangoh, Saharanpur (U.P.)E) BBDIET, Bulandshahr (U.P.)F) Sky Line Institute of Engineering and Technology, Greater NoidaG) RKGIT GhaziabadH) BBDIT GhaziabadI) GLA MathuraJ) HCST,Farah,MathuraK) IPEC,Ghaziabad

4. I have been evaluating answer sheets of UPTU, LUCKNOW over the last 7 years.5. I have been appointed as Head Examiner for Optical Network (TEC-043) in 2009 Examination work at JSS.6. Appointment as a centre suprintendent(C.S.) for Odd semester (2010-2011) examination at Prasad Institute of Technology,Jaunpur.7. Worked as a flying squad team member under the esteemed guidance of Dr. Rakesh Kumar in 2010-2011 exams at IPEC Ghaziabad.8. I have been setting question papers for M.TECH. for subject optical networks.9. I have been guiding several B.TECH final year projects as project co-ordinator over the past 3-4 years which are given below-

1. PC TO PC COMMUNICATION USING LASER (FOR RS-232 COMPATIBLE SIGNALS))

2. BALL DETECTION IN REAL TIME IMAGE USING MATLAB.3. UNMANNED RAILWAY CROSSING SYSTEM USING MICROCONTROLLER 80514. UNMANNED AERIAL VEHICLE (UAV)5. DESIGN AND IMPLEMENTATION OF GMSK MODEM FOR MOBILE CHANNEL6. SIMULATION OF QPSK MODULATOR AND DEMODULATOR IN MATLAB7. DESIGN OF MICROSTRIP PATCH ANTENNA.8. PREPAID ENERGY METER9. DESIGN AND IMPLEMENTATION OF GMSK MODEM FOR WIRELESS

INFRASTRUCTURE.10. STEGANOGRAPHY USING MATLAB11. IMPLEMENTATION OF SDR (SOFTWARE DEFINED RADIO) IN MATLAB 7.012. STEGANOGRAPHY AND STEGANALYSIS (HIDING ONE IMAGE OR DATA

STRING IN THE OTHER IMAGE)13. USE OF RADON TRANSFORM FOR GETTIGN 1-D PROJECTIONS OF 2-D

IMAGES.14. UNMANNED RAILWAY CROSSING SYSTEM15. MAV (Manned aerial vehicle)16. RAILWAY SIGNALLING17. COMPARISON OF VARIOUS FILTERS ON X-RAY IMAGES USING DIFFERENT

FILTERS FOR DIFFERENT TYPES OF NOISES IN MATLAB 18. Image Registration using image sub-pixel cross-correlation.19. Robust face detection using artificial neural networks&PCA (Principal component

analysis)20. Pattern recognition using Artificial neural networks21. Facial expression recognition using Eigen vector approach.22. Edge detection techniques comparison (canny, sobel, prewitt, roberts etc.)

M.TECH. Dissertations Guided –(5)3(UPTU), 2(Shobhit University,Meerut) 2-D recostruction using Radon Transform in Shobhit UniversityStudent-Miss. Supriya YadavRobust face detection algorithm in Shobhit University MeerutStudent- Miss Chandani Sharma3. Robust approach to facial expression classification,UPTU4. Face detection using gabor wavelet and artificial neural network,UPTU,Lucknow.5. Morphological shared weight neural network for face recognition.6. Image compression using wavelet and their comparative analysis.7. Speech synthesis, enhancement, analysis for medical applications etc.

Reviewer-1. IET journal of Image Processing (UK)

Reviwed papers from Mexico,Iran, etc. on Image Processing Area.

2. Worked as a Reviewer for International conference held in Beijing , China organized by IEEE .

3. Appointed as a reviewer for an international IEEE indexed conference “ICCSIT” 2011 held at Chengdu,China,June 10-12,2011.

Research &Development Activities-

UAV Laboratory-

1. (EMBEDDED DEVELOPMENT)Imagine cup 2009 to be held in Cairo, EgyptProject- (1)Real time disaster management system using RF tags(Transponders) and RF reader (Interrogator) for the human beings trapped in the natural disasters and to give awareness about these disasters like ,tsunami, earthquakes(movement of tectonic plates),Tidal winds etc.

(2) Robotic arm

(3) Electronic eye for blind people using concept of Image processing

(4)Project based on primary education for remote areas of country based on the biometric systems like palm geometry, hand geometry, thumb impression, iris, veins, DNA, face recognition for authentication purposes.Note- for the entire project E-BOX 4300 is being sent by Microsoft for embedded development along with the Windows embedded CE FOR designing the OS (MANAGEMENT STATION) and for developing various applications on the OS (Operating systems).

2. UAV Project organized by Korean Aerospace Industries Association (KAIA) Seoul, South Korea for Microsoft USA to be held in Cairo, Egypt in the month of September 2009.Project- UAV (Quad-rotor)(a) Precision dropping (Dropping of object from the UAV at an altitude of 300 meters from

the ground surface, Object may also be further augmented by several other structures like fur,feather,ribbon etc for its stability purposes.)

(b) High quality acquisition of images (noise filtering techniques and use of high resolution CCD wireless cameras etc.) from the obstacle lying on the ground along the way points using image processing.

(c) Estimate the coordinates (LLC COORDINATES AND GPS TIME) of the fire engine surrounded by the rectangular block whose vertices coordinates are already specified using image-processing techniques.

(d) Compute the estimated coordinates of distressed people in the sea by the side of the field using the image processing principles to help them out.

Technology used- Pattern matching, object recognition using scale invariant Fourier transform methods (SIFT).

(3) UAV organized by US Army at Georgia base field-Project- UAV which supports various image processing based navigation and obstacle avoidance inside the room to be held this year in the month of June at Georgia Institute of Technology.Technology used- Vision based navigation and Kalman filtering for noise suppression on the sensory inputs like gyroscopes, accelerometers, GPS coordinates (IMU)

(4) Project accepted on electronic eye in the National level competition organized by Vector India Hyderabad.For more details log on to www.vectorindia.org

DRDO Project-2010:

Guided DRDO Project on Unmanned Ground Vehicle for which grant of Rupees 1 lakh was given to me for carrying out research work.Developed ROBOT for different conditions mentioned below:1.Gravel terrain,corrugations,stair climbing etc.2. Lane detection using Image Processing.3. GPS Navigation.4. Obstacle avoidance

Comprehensive report on Autonomous Ground Reconnaissance system was handed over to CVRDE (Chennai) for final selection of robot under my guidance on 27 october 2011 and we were invited to CVRDE for final demonstration of the robot designed.

Cadence –Nasscom Project:Guiding 2 Cadence Design company projects-1. Software Defined Radio Implementation on CSDK DSP development board.

This project focuses on the design and implementation of a digital software radio. Digitalsignal processing (DSP) is used to implement the transmitter and receiver. This allow for greater flexibility and accuracy when designing the radio. The project is ascaled down version of the IEEE 802.11a standard that uses QAM (QuadratureAmplitude Modulation) with OFDM (Orthogonal Frequency Division Multiplexing) tocreate the coding and modulation scheme. The project also focuses on rapid developmentand prototyping by using Simulink block diagrams to program the Texas InstrumentsTMDSK6713 evaluation board.

2. To be finalized soon

DST Project-

One Project on ICT in Agriculture is to be submitted for grant of rupees 20 lacs from DST under Technology systems development programme.

Organizer-

1. Workes as a Chairman for National conferences organized by ABES ECE deptt. For consecutive 3 years.

2. Working as a convener for National conference NCWCET-2011 to be held in Feb-2011 organized by Electronics and Comunication Engg. Deptt.

Awards and Recognition:1. Best R&D Award by ABES Engineering College for year 2010.2. Nominated for best faculty award for year 2010.3. Best teaching performance award for 2010.

Consuntancy:Working as a consultant to many firms in Noida and Ghaziabad like Thinnkware Ltd. Noida etc. for Image Processing Projects.

M.Tech.-Taught Subjects in UPTU Regular and Modular courses which are given as under:1. Optical Networks.2. Digital Image Processing(DIP)

9/06/04-30/07/2007 Northern India Engineering College (Babu Banarsi Das Society,Lucknow) GGSIP University, Shastri Park,New Delhi in the Deptt. Of Electronics and Communication as a Sr. Lecturer cum D.I.(Departmental Incharge)1) Taught Electromagnetics and Microwave engineering2) Established fourth generation Mobile and Digital Satellite communication lab3) Worked as a timetable in charge in the department of electronics4) Handling optical fiber communication lab5) Worked as a coordinator for all colleges affiliated from GGSIP University6) Responsible for Industry-Institute interaction, students placement,and to invite Professors from the universities of repute like IITs and IIMs .7) Worked as a co-ordinator in one day workshop on LASER ADVANCEMENTS to be held in the month of feb-2007.8) Worked as Incharge in the workshop on VLSI DESIGN to be held on 25/01/07.9) Invited Dr. V.K.JAIN from IIT-D to give an expert lecture on SONET/SDH.10) Invited Dr. K.S.YADAV from CEERI-PILANI (Presently at C-DAC NOIDA) to give an expert lecture on VLSI DESIGN.11) Invited Mr. VIKAS GUPTA (An Alumnus of IIM-A) from IMT-GHAZIABAD to give an expert talk on personality development.12) I was appointed as a co-ordinator for the subject ELECTRONICS and examiner for the same subject and practical examiner by UPTU (LUCKNOW) AND GGSIPU, NEW DELHI13) Organized industrial visits for final and pre-final year students in various reputed public sectors like ALTTC-GZB, LASTEC, SSPL, OPTO ELECTRONICS, DEAL, NTPI, NTPC, IRDE, and BEL etc.14) Worked as associate coordinator in the TECH FEST “FNORD-07” to be organized in March-2007

9/08/02-08/06/04 Dehradun Institute of Technology, Dehradun (U.A.) in the Deptt. Of Electronics and Communication as a Lecturer.

1 Various subjects of final year (Microwave Communication, optical communication, Digital Communication, Digital signal processing, Radar guidance and navigation, Antenna and wave propagation)

2 Attended a National conference in IMS Dehradun on recent trends on information technology

3 Deputed to ONGC Dehradun to teach ONGC employees under Unatti Prayas Scheme4 Handled the charge of microwave lab in DIT Dehradun5 Worked as a time table in charge and section coordinator

15/03/02- AUG02 Ajay kumar Garg Engineering College, Ghaziabad (U.P.) in the Deptt. Of Electronics and Communication as a Lecturer.

1 Established printed circuit board lab in A.K.G.E.C. GZB

Handling VHDL lab in Shobhit institute of engineering and technology under the guidance of Dr.K.S. YADAV HOD (VLSI DEPTT.) CDAC- NOIDA

1/09/01-10/03/02 Nice Management College,Meerut (U.P.) in the department of IT branch.

Skills:-Operating systems- Linux, windows98/2k/ntPackages/tools- win95, system cCOMPUTER SIMULATION AND DESIGN TOOLS-VHDL tool- active HDL-6.2, SYNPLIFY-PRO-7.2, XILINX-PROJECT NAVIGATOR

6.2MATLAB VERSION-7.6 (COMMUNICATION SYSTEM, DSP TOOL BOX)Projects undertaken under MATLAB (simulink)-:1. Simulation of channel with noise for calculation of bit error rate of the data transmitted

through channel.

2. Simulation of channel with noise for reducing bit error rate by using Hamming code, Convolutional coding etc.

MULTISIM VERSION 7.0(ANALOG/DIGITAL CIRCUIT SPICE SIMULATOR) WITH ULTIBOARD 7.0 PCB LAYOUT VERSION

OPTSIM (COMPUTER AIDED DESIGN FOR VARIETY OF OPTICAL NETWORKS)

Professional qualification:-2 B.Tech (Electronics and Communication) from P.C.C.S. Noida (Affiliated from

Rohilkhand University Bareilly) in 2001with 68%

3 M.Tech (Electronics and Comm.)(With 83%) From Gandhi Vidya Mandir University) in 2006.

1 Ph.D(2019) in Electronics & Communication Engineering on the topic entitled “Novel approach for human face detection & recognition under complex background conditions based on comparative evaluation of existing techniques” under the guidance of Dr. Ashish Gupta Professor & HOD (ECE), I.T.S. Engineering College from Sri Venkateshwara University,Gajraula,Moradabad,UP.

Relevent Project work: - FM transmitter and receiver

Memberships:-1 Associate member of Institution of Engineers India IEI (INDIA)

2 Associate member of Indian Society for Technical Education (ISTE)3 Associate member of Institution of Electronics and Telecommunication Engineers

(IETE) INDIA4 Associate member of TWSI (TECHNOCRAT WELFARE SOCIETY OF INDIA)

U.A.5 Associate member of IEE (UK) in process6 Member of IEEE Microwave theory and Techniques (MTT) society&IEEE.7 Member of ICEIT (New Delhi)

Summer Training:- Escotel mobile communication limited, Abu lane, Meerut (U.P.)

SRB M/C pvt. Limited Sahiba bad, (U.P.)

Messung systems, Okhla Industrial Area, Delhi

Short term Training Programmes/Achievments:-

Published an article in the magazine just careers

Attended a National conference on recent trends in Information Technology in IMS Dehradun.

Attended a National workshop in Indian Institute of Technology kanpur (IITK) organized by electrical engineering Deptt.

Attended a short term training course in Indian Institute of Technology Kanpur on

materials for high temperature applications sponsored by CDTE (IITK)

Attended a orientation program in Delhi College of Engineering, Bawana road, New Delhi on 22-23 September 2006

Attended a short term course in Indian Institute of Technology (IITK) on wired and wireless networks sponsored by CDTE (CENTRE FOR DEVELOPMENT OF TEHNICAL EDUCATION)

Selected under QIP SCHEME (Sponsored by MHRD, Govt. of India) for Summer School in recent trends in electronics (16 June 2008-29 June 2008) organized by National Institute of Technology, Patna (Bihar).

Attended 2 days workshop on BRAIN IMAGING FROM MOLECULES TO SYSTEMS in IIT DELHI (IIT-D) on 5-6 Sep 2008.

Presented a paper in national conference on 13 Sep 2008 on the topic – TO DEVELOP A METHOD OF COMPUTER VISION FOR INDUSTRIAL INSPECTION USING WAVELET TRANSFORM organized by outer Delhi chapter IITK (INDIAN INSTITUTE OF TECHNOLOGY, KANPUR) ALUMNI ASSOCIATION AT GHAZIABAD.

Resume short listed in Dublin Institute Of Technology, Bolton Street, Dublin 1,Ireland for Asst. lecturer in Electrical services Engineering

Participated in one-day seminar on recent developments in VLSI Design on 25/01/07 in Northern India Engineering College, Shastri Park, and New Delhi.

Worked in N.I.E.C Tech Fest “fnord” 2007 as a coordinator (Transport –Logistics)

Participated in N.I.E.C. Tech Fest “fnord” 2007 Technical Paper Presentation (TPP)

Participated in N.I.E.C. Tech Fest “fnord” 2007 in Workshop on Recent advancements in ELECTRONICS.

Participated in one-day workshop on CAD –TOOLS in C-DAC NOIDA on 12th April 2007.

Worked as a Chairman of registration committee in the National Conference on Nano Science and Technology organized by Deptt. Of electronics and communication, ABES Engineering college, Ghaziabad on 16-17 Jan 2009.

In addition to the above responsibilities of Faculty I also looked after the post of Asst. Registrar (Admn.) in N.I.E.C., Shastri Park, New Delhi. Details of the work are briefly described below.

Preparation of compliance report for submission to GGSIPU, Govt.of Delhi NEW DELHI

Preparation of compliance report for submission to AICTE etc.

Worked as a coordinator for NBA (NATIONAL BOARD OF ACCREDITATION) PROGRAMME.

Looked after infrastructure facilities and maintenance of the college

Qualified written test of Aviation Research Center (ARC) New Delhi which is a part of Govt. of India intelligent unit RAW (Research and Analysis Wing).

Resume short-listed for the post of Asst. lecturer in Dublin Institute of Technology, Dublin, Boltan Street, Ireland in 2006.

Resume short-listed for post of Lecturer in Dublin Institute of Technology, Dublin, Boltan Street, Ireland in 2007.

The Ministry of Education “sultanate of Oman” for the post of lecturer in college of Technology in the Deptt. Of Electronics and Communication selected me finally in 2007 for session 2007-2008 with posting at Muscat (Oman) (College of Technology) with monthly salary of 1600 US Dollars/730-Rial Oman per month.

The Ministry of Education “sultanate of Oman” (for the post of lecturer in college of Technology in the Deptt. Of Electronics and communication) selected me again in Dec-2007 with posting at Muscat (Oman)(College of Technology) with monthly salary of 2000 US Dollars/750-Rial Oman per month for session 2008-2009.

Participated in Seminar on Emerging Trends in Communication in ABES Engg. College in 7,8-Dec-2007 under the Guidance of Dr. Risal Singh and Presented paper on the topic-A new design of band pass filter using Periodically defected ground planes.

Short-listed for the Glasgow university college (Scotland) based in sultanate of Oman for the year 2008 (Caledonian College of Engineering) for the Deptt. Of Electronics and Communication.

1 Attended a Wipro’s Mission 10X workshop conducted at ABES,GZB from 13th-17th July 2009

Selected in Glasgow University college (Scotland) (Caledonian college of

Engineering) based in Sultanate of Oman for the year 2009 in the Deptt. Of Electronics and communication for the post of Senior lecturer with monthly salary of around 1000 rial omani equivalent to 2700 US DOLLAR.

Resume shortlisted for Higher College of Technology (HCT) based in Dubai.

Resume short listed for University of west-Indies St. Augustine campus for lecturer in electronics engg. Deptt.

Attended 2 days seminar on Emerging Trends in communication in ABES Engineering College and worked as a Chairman (Registration committee) and looked after all seminar related arrangements like reviewing the technical papers, Publication of Seminar proceedings etc.

Resume short listed for university of Kabul and for university of Balkh Afghanistan and interviewed by project manager of Afghanistan world bank grants Ms. Julie lebo from (Kansas state university, Manhattan)

Resume short-listed for Defence Engineering College, Ethiopia (East Africa) for military applications.

Selected by Ball state University for World Bank project in NIMA Afghanistan on gross emoluments of $3000 Dollars for 2014.

Courses/workshops/seminars attended in 2011 –

1. Attended National workshop on application of MATLAB in signal processing and wireless communication in KIET Ghaziabad on 19th February 2011.

2. Attended one day workshop on ‘WAVELETS & ITS applications in signal processing at Jaypee Institute of Information technology Noida on 20.04.2011

3. Paper published in National conference (NCETM-2011) for publication in conference proceedings and presentation to be held in SDEC Ghaziabad on May 7-8, 2011.

4. Paper presented in 2 nd National conference (Innovation and Entrepreneurship in ICT) on impact of ICT on GNI for developing countries to be held in MMTU Noida on May 14-15 ,2011

5. Attended 2 days FDP in KIET on current trends in wireless communication –NS-2 simulator on 16-17 May, 2011.

6. Selected for STC through QIP in IIT Roorkee to be held from 13-17th June 2011 on “Medical Signal and Image Processing”.

7. Paper published in AKG Journal of Technology on “Modified Neural networks for face recognition” in Jan-June 2011 issue.

8. Attended a National workshop on Qualnet’s Integration Modules for wireless sensor networks organized by ECE deptt. KIET,GZB on 18th May 2011.

9. Paper submitted to the International conference “ICDM’ to be held in September 2011 in IMT Ghaziabad on the topic Novel segmentation algorithm for images without regular boundaries and homogeneous intensity.

Courses/workshops/seminars/Research Papers/Papers reviewed in 2012

Conferences-

1. Paper published and presented held in AKGEC in National conference on EOPI titled IP detail record for next generation billing standards March 2-3, 2012, page 55-62, ISBN 93-81583-25-8.

2. Paper published and presented held in NIEC New Delhi in National Conference on Advanced VLSI titled “Novel clock gating technique” Feb 28-29, 2012, page 50.

3. Paper accepted for presentation and publication in National conference (ACCES-2012) titled “Novel Denoising Techniques for MRI”in MMMEC Gorakhpur.

Reviewer (2012)-

1. Reviewing papers for ISIEA 2012 (2012 IEEE Symposium on Industrial Electronics and Applications).2. Reviewing papers for PECON 2012 (2012 IEEE International Power and Energy Conference).

3. Reviewing papers for ICCSII 2012 (2012 IEEE Conference on Control, Systems & Industrial Informatics).

4. Reviewing papers for ICEDSA 2012 (2012 IEEE International Conference on Electronics Design, Systems and Applications).

5. Papers reviewed in IET journal of Image Processing (UK) in 2012 are given as under-

1. Texture Based Medical Image Compression.

2. Characterization of Lesion Contour in Brain Using Fractal Analysis. 3. Finger Vein Segmentation in Infrared Images Based on Model Fitting.

4. Effective Visualization of Adaptively Encoded Multispectral Images. 5. Number Plate Localization using Morphology and Character Position Method.

Publication Details in the Year 2012

International Journals (2012) –(05)

1. Paper titled “Comparative study of various transform based methods for ECG data” published in December issue of the "AKGEC International Journal of Technology" July-December Issue,Vol. 3,No. 2,ISSN 0975-9514.

2. Paper published in International Journal of Scientific Research Engineering & Technology (IJSRET) Vol.1, Issue 5, PP 299-302, Aug 2012, ISSN 2278-0882 on the topic “Novel Technique for Image Denoising”.

3. Paper published in International Journal of Advanced Research in Electronics &Communication Engineering (IJARECE) Vol. 1, Issue 4, Oct 2012, ISSN 2278-909X on the topic “Novel Face Detection Technique.”

4. Paper Published in Proceedings of International conference on Emerging Advance Technologies for Human Development (EATHD-2012) Aug 11th and 12th 2012.

5. Paper published in VSRD International Journal of Electrical, Electronics & Communication Engineering (ISSN No. 2231-3346(ONLINE)), Vol. 2, Issue No. 12, December-2012 on topic “Novel Image Compression Technique”.

6. Paper titled “Performance Comparison Of Image Denoising Techniques” published in VSRD-IJEECE International journal (e-ISSN No. 2231-3346(Online), Vol.3, Issue No. 1, January 2013.

Publication Details in the Year 2012-2013

International Journals (2012) – (10)

2. Paper titled “Comparative study of various transform based methods for ECG data” published in December issue of the "AKGEC International Journal of Technology" July-December Issue,Vol. 3,No. 2,ISSN 0975-9514.

2. Paper published in International Journal of Scientific Research Engineering & Technology (IJSRET) Vol.1, Issue 5, PP 299-302, Aug 2012, ISSN 2278-0882 on the topic “Novel Technique for Image Denoising”.

3. Paper published in International Journal of Advanced Research in Electronics &Communication Engineering (IJARECE) Vol. 1, Issue 4, Oct 2012, ISSN 2278-909X on the topic “Novel Face Detection Technique.”

4. Paper Published in Proceedings of International conference on Emerging Advance Technologies for Human Development (EATHD-2012) Aug 11th and 12th 2012.

5. Paper published in VSRD International Journal of Electrical, Electronics & Communication Engineering (ISSN No. 2231-3346(ONLINE)), Vol. 2, Issue No. 12, December-2012 on topic “Novel Image Compression Technique”.

6. Paper titled “Performance Comparison Of Image Denoising Techniques” published in VSRD-IJEECE International journal (e-ISSN No. 2231-3346(Online), Vol.3, Issue No. 1, January 2013.

7. Interference with Bluetooth Device to be published in International journal IJESRT, Vol.2 Issue -4,April 2013,ISSN 2277-9655

8. LTE Advanced: Carrier Aggregation Deployments to be published in International journal IJESRT, Vol.2 Issue -4,April 2013,ISSN 2277-9655

9. Analyzing face recognition using PCA and comparison between different distance classifier to be published in International journal IJESRT, Vol.2 Issue -4, April 2013, ISSN 2277-9655

10. Performance comparison of various face detection techniques to be published in IJSRET (ISSN No. 2278-0882, Vol. 2, Issue No. 2, May-2013.

11. Non Linear adaptive volterra filter for broadband interference suppression to be published in International Journal (IJESRT) ISSN: 2277-9655, Vol. 2 Issue 5(May-2013).

Paper publication in National Journal ISST Journal of Electrical & Electronics Engineering, July-December 2012, Vol.3 No.2, ISSN 0976-7363

1. Comparative analysis of Face detection techniques based on feature extraction 2. Face detection using Gabor wavelets and Neural Network3. Novel fingerprint recognition technique

Papers published in National Conference in 2013(Advanced Technologies in Electronics & Communication-2013) ATEC-2013, ISBN-978-93-82880-15-8 in association with IETE Lodhi road.

1. Comparative analysis of face detection techniques based on feature extraction2. Novel face detection technique3. Novel fingerprint recognition technique4. Adaptive antenna arrays with signal processing capabilities for mobile

communication5. Triple band microstrip antenna with defected ground plane6. Mobile satellite communication (Using GPS)7. Designing and implementation of digital speech security system8. Survey of advanced face detection techniques

B.Tech. Projects Guided- 1. Face recognition using Eigenface approach (PCA)2. ICI cancellation in OFDM3. Eye detection using wavelets and neural network.4. Performance comparison of NEURAL NETWORK, SVM & SOFM for face detection and recognition.5. ECG Simulator6. JPEG compressorMTech. Project Guided-02

International Achievement-

Resume shortlisted for the post of Associate Professor for colleges of Technology, Oman by TATI (Technical and Administrative Training Institute) Oman in 2012.

Resume shortlisted for Fiji National University, Fiji Islands for the post of Senior lecturer.

Assignments (2012)-

1. Working as a Nodal coordinator for IITD Virtual Lab established in Electronics and Communication Engineering Department.

2. M.Tech. Thesis supervision (2012)-Guided and supervised dissertation on Topic “Novel Face Detection Technique”

Student Name- Mrs. Poonam Singh Assistant Professor-VCE Meerut

2. Working as a Co-convener for National conference on Advanced Technologies in Electronics and Communications (ATEC-2013) to be held in month of March in association with IETE.

3. Editor of ISST Journal of Electrical and Electronics Engineering.

Countries Visited- South Korea (Seoul), Dubai

Projects Undertaken(2014)-

1. Worked for IIT-D Virtual lab setup for EC Department.2. Looking after project of MSME(Govt. Of India) on Electronic eye for blind people community.3. Working as a Convener for conference proposed in March 2015.4. Paper published in International Journal of AKGEC Ghaziabad in July-December 2014 issue.

Refereed Conferences, Publication (National/International)

International conferences (Refereed)-20

National conferences-06National Journal-03

International Journal (05) (One under review) (IJIP)

1. Paper selected for oral presentation and publication in National conference proceedings at BIRT Bhopal on the topic “wavelet based texture analysis of tissues”

2. Paper selected for presentation and publication in National conference (RAEE-2008) in NIT Hamirpur organized by IEEE CHAPTER on the topic “comparative study of sequential feature selection algorithms for liver tumor characterization and classification.”

3. Paper selected for presentation in BBDIT Ghaziabad in National conference on the topic “To develop a method of computer vision for industrial inspection using wavelet transform organized by IIT Kanpur alumni association.

4. Paper selected in the National conference NCET-2009 for oral presentation organized by MIT (Moradabad Institute of Technology) Moradabad (U.P.).

5. Paper selected in the National conference ACST -2009 organized by IMS Engineering college, Ghaziabad(U.P.) for oral presentation on the topic liver tumor characterization.

6. Paper selected in the National conference organized by Punjab Engineering College (Deemed University) Chandigarh to be held on 18-19 Dec 2008 for oral presentation and publication in the conference proceedings co sponsored by IEEE Chandigarh sub-section and IEI (Institution of Engineers, Calcutta)

7. Paper selected in the International conference (WCSET 2008) WORLD CONGRESS ON SCIENCE, ENGINEERING AND TECHNOLOGY in Bangkok (Thailand) for oral presentation and publication in the proceedings of World Academy of Science, Engineering and Technology, volume 35, October 2008 on the topic “Image processing and Machine vision for dimension metrology and industrial inspection. WASET conference proceedings are reviewed and indexed by Open science index (OSI), Google Scholar, Directory of Open Access Journals (DOAJ), EBSCO, Ulrich’s Periodicals Directory, German National Library of Science and technology and University Library Hannover (TIB/UB), Genemics and INTUTE.

8. Paper selected in International conference (ICCET 2009) International Conference on Computer Engineering and Technology, Singapore organized by IEEE computer society on the topic entitled “Machine vision in industrial inspection for Surface roughness Measurement both for presentation and publication in the conference proceedings of the ICCET 2009 and along with this Paper will also be listed the IEEE Xplore and EI (Compendex). Paper will also be indexed in Computer Society Digital Library (CSDL).

9. Paper selected in International conference (HCI-2009) Human Computer Interaction organized by IIIT Allahabad (jointly organized by IITK and IEEE) on the topic “machine vision for fabric inspection”.

10. Paper selected in International conference on computer modeling and simulation (ICCMS-2009) in China (Macau) for oral presentation on the topic entitled “Brain tumor segmentation and cerebral edema recognition” organized by IEEE computer society, IACSIT. Papers will be indexed by IEEE computer society digital library (CSDL), IE (compendex), INSPEC, Thomson ISI, IEEE Xplore TM.

11.Paper selected in International conference on computer and automation engineering (ICCAE-2009) to be held in Bangkok, Thailand 8-10 March 2009 for oral presentation organized by IEEE

computer society. All accepted papers will also be published in the conference proceeding by IEEE Computer Society, which will be indexed by EI Compendex, INSPEC, Thomson ISI, IEEE XploreTM, IEEE Computer Society (CSDL) digital libraries.

12. Paper selected in International conference (IMECS 2009) International Multiconference of Engineers Computer Scientists 2009 on ‘Dynamic solution for texture feature extraction’ to be held in Hong Kong 18-20 March 2009. Accepted Papers will be published in conference proceedings by IAENG (ISBN: 978-988-17012-2-0) and will be indexed by IET INSPEC,ESBC and Technology Research Databases(TRD) of CSA.Accepted papers will be considered for publication in the IAENG journals and in the edited books like IEEE Computer Society and Springer.

13. Paper selected in International conference (ICDIP 2009) to be held in Bangkok, Thailand 7-9 March 2009 on the topic entitled ‘Machine vision in Dimension Metrology’ for Oral presentation and publication in the conference proceedings and in addition to this paper will also be listed in the IEEE Xplore and indexed by EI (Compendex).

14. Paper accepted for poster presentation in the IEEE Symposium on computational intelligence CIIP-2008 to be held in Nashville organized by IEEE and University of Waterloo Canada.

15.Paper selected in the International Conference (ICFCC 2009) International Conference on Future Computer and Communication, Kuala Lumpur, Malaysia for oral presentation and publication in the conference proceedings and in addition to this paper will be listed in the IEEE Xplore and be indexed by (Compendex)and ISI Thomson(ISTP).

16. Paper selected in the IASTED international conference in (AIA2009) Artificial Intelligence and Applications, Innsbruck, Austria for oral presentation and publication in the conference proceedings and publication in the ACTA press on the topic entitled “EDEMA RECOGNITION IN THE BRAIN TUMORS”

17. Paper selected in the International Conference on Signal Acquisition and Processing (ICSAP 2009) Kuala Lumpur Malaysia to be held on 3-5, April 2009 for oral presentation on the topic entitled ‘Comparative study of feature selection algorithms for liver tumor characterization’. Paper will be published in the conference proceedings and will be listed in the IEEE Xplore and be indexed by in (Compendex) and ISI Thomson (ISTP).

18. Paper selected in the International Conference on Signal Acquisition and Processing (ICSAP 2009) Kuala Lumpur Malaysia to be held on 3-5, April 2009 for oral presentation on the topic entitled ‘Segmentation Method for MRI Images of Brain Tumor Tissue’. Paper will be published in the conference proceedings and will be listed in the IEEE Xplore and be indexed by in (Compendex) and ISI Thomson (ISTP).

19. Paper selected in the International Conference on Signal Acquisition and Processing (ICSAP 2009) Kuala Lumpur Malaysia to be held on 3-5, April 2009 for oral presentation on the topic entitled ‘Automatic Brain Tumor Segmentation and Edema Recognition’. Paper will be published in the conference proceedings and will be listed in the IEEE Xplore and be indexed by in (Compendex) and ISI Thomson (ISTP).

20. Paper selected in the ECCOMAS Thematic Conference: 2nd South-East European Conference on Computational Mechanics-SEECCM2009 to be held on 22-24 June 2009, Rhodes, Greece Organized by European Community on Computational Methods in Applied Sciences (ECCOMAS),International Association for Computational Mechanics(IACM) and Institute of Structural Analysis and Seismic Reasearch, National Technical University of Athens, Zografou Campus, Athens on the topic entitled ‘Texture Feature Classification in Computed Tomography Images for oral presentation and publication in the CD-ROM Proceedings of the Conference.

21. Paper selected in the 4th IEEE Conference on Industrial Electronics and Applications (ICIEA 2009) to be held on May 25-27, 2009 in X’ian, China on the topic entitled ‘Automatic Brain Tumor Segmentation and Edema Recognition in MRI for oral presentation and publication in the Conference Proceedings and will also be listed in the IEEE Xplore organized by IEEE Industrial Electronics Society, Northwestern Polytechnical University, IEEE section China, IEEE control systems society.

22. Paper selected in 4th International Conference on Intelligent Computing and Information Systems (ICICIS) 19-22 March 2009, Cairo-Egypt for oral presentation on the topic ‘Comparison of Sequential feature selection algorithms for liver tumor characterization’.Selected papers will be published the conference proceedings and ACM Computer’s field premier Digital library.

23. Paper selected in the International conference ECTI-CON 2009

in Pattaya, Thailand organized by IEEE Thailand section on the topic entitled ‘Texture classification in computed tomography images for oral presentation and publication in the IEEEconference proceedings. All selected papers will also be published in the IEEE Xplore(r).

24.Paper selected on the topic entitled "Segmentation method for MR Images of brain tumour tissues", for presentation at the IEEE sponsored International Computing Conference, to be held in Fullerton, California, April 2-4, 2009 organized by California state university,Stanislaus, Department of Computer Information Systems 1 University circle Turlock CA 95382.

25. Paper selected in International Conference on Artificial Intelligence (ICAI'09: July 13-16, 2009, USA) on the topic entitled “Comparative Study of Sequential Feature Selection Algorithms for Liver Tumor Characterization and Classification”. The conference proceedings/book will be published in printed form (with International Standard Book Number/ISBN). Inspec/IET/DBLP/CS Bibliography etc. will be indexing the conference proceedings in to their databases.

26.Paper submitted to: The 2009 International Conference on Image Processing, Computer Vision, and Pattern Recognition (IPCV'09: July 13-16, 2009, USA)has been accepted. Paper has been accepted

on the topic entitled “A Dynamic Solution for Texture Feature Extraction” as a Regular Research Paper (RRP).The conference proceedings/book will be published in printed form (with International Standard Book Number/ISBN). Inspec/IET/DBLP/CS Bibliography etc. will be indexing the conference proceedings in to their databases.

Research Publications (2010) :(8)

1. Presented a research paper titled “ MAV Flight Formation Using Adaptive Neural Network “ at International Conference on Advances in Mechanical Engineering (ICAME – 2010) , 4th -6th January 2010,organized by S.V.N.I.T. Surat , page 593-597.

2. Presented a research paper titled “MAV Surveillance and Reconnaissance in Urban environment” at 1st US-Asian MAV Conference (MAV’08),8th -14th March 2008 , organized by US Department of Defense , US Army , Indian Army, DRDO, NAL, ADRDE, page 36-40.

3. Research paper titled “Character Recognition Using A New Feature Extraction Technique” accepted & presented in “The National Conference on Advanced Computing and Communication Technology” Feb 26-27, 2010,page

4. Research paper titled “Face Detection Using Gabor Feature Extraction and Artificial Neural NetworkAccepted and presented in “ International conference ISCET 2010 “ March 19-20,2010,page 257-262.

5. Research paper presented on “Robust Approach To Brain Segmentation in fMRI Data” accepted in “1st IFIP International Conference on Bioinformatics” at SVNIT March 25-28,2010,page.77.

6. Paper accepted and published in International conference FTICT-2011 to be held in RKGIT in Feb-2011 on the topic entitled “ Facial Expression Recognition using Eigen Face approach.

7. Paper accepted and published in International Conference FTICT-2010 to be held in RKGIT in Feb-2011 on the topic entitled "Morphological shared weight neural network fro face recognition."

8. Paper published in National journal Journal of Science,Technology &Mnagement entitled “Vision and Quest” ISSN 0975-8410 Vol.1 No.2 July-December 2010 on the topic “Comparative Study of algorithms for face recognition.

REFERENCES- (List of Referees)

1. Mr. Sanjeev GoyalJoint Director (CEP)ICWAILodhi RoadNew Delhi

2. Dr. M R PrasadProfessor& HeadDepartment of EIBBDIT College,Ghaziabad

Mob-09811529147

3. Prof. Risal SinghFormer Scientist “F” SSPL, DRDO, Delhirisal_singh@yahoo.co.in

9871412947(M)

DATE -20-06-2019 BHASKAR GUPTA

Total emoluments approaching 80,000/- Per Month.