draughtsman civil...revised curriculum for draughtsman civil 1 st year (volume i of ii) assignment...

NATIONAL INSTRUCTIONALMEDIA INSTITUTE, CHENNAI

DRAUGHTSMAN CIVIL

SECTOR: Construction

ASSIGNMENT / TEST

Post Box No. 3142, CTI Campus, Guindy, Chennai - 600 032

MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIPGOVERNMENT OF INDIA

1st Year (Volume I of II)

DIRECTORATE GENERAL OF TRAINING

NSQF Level - 5

Copyright Free under CC BY Lincence

ii

Sector : Construction Duration : 2 - Years Trades : Draughtsman civil 1st Year (Volume I of II) - Assignment NSQF (Level - 5)

First Edition: December 2018, Copies :1000

Rs. 90/-

All rights reserved.

No part of this publication can be reproduced or transmitted in any form or by any means, electronic or mechanical, includingphotocopy, recording or any information storage and retrieval system, without permission in writing from the NationalInstructional Media Institute, Chennai.

Published by:

NATIONAL INSTRUCTIONAL MEDIA INSTITUTEP. B. No.3142, CTI Campus, Guindy Industrial Estate,

Guindy, Chennai - 600 032.Phone : 044 - 2250 0248, 2250 0657, 2250 2421

Fax : 91 - 44 - 2250 0791email : [email protected]

[email protected]: www.nimi.gov.in


iii

FOREWORD

The Government of India has set an ambitious target of imparting skills to 30 crores people, one out of every four Indians, by 2020 to help them secure jobs as part of the National Skills Development Policy. Industrial Training Institutes (ITIs) play a vital role in this process especially in terms of providing skilled manpower. Keeping this in mind, and for providing the current industry relevant skill training to Trainees, ITI syllabus has been recently updated with the help of Media Development Committee members of various stakeholder's viz. Industries, Entrepreneurs, Academicians and representatives from ITIs.

National Instructional Media Institute (NIMI), Chennai has come up with instructional material to suit the revised curriculum for Draughtsman civil 1st Year (Volume I of II) Assignment NSQF Level - 5 in Construction sector under Semester Pattern required for ITIs and related institutions imparting skill development. The NSQF Level 5 will help the trainees to get an international equivalency standard where their skill proficiency and competency will be duly recognized across the globe and this will also increase the scope of recognition of prior learning. NSQF level 5 trainees will also get the opportunities to promote life long learning and skill development. I have no doubt that with NSQF level 5 the trainers and trainees of ITIs, and all stakeholders will derive maximum benefits from these IMPs and that NIMI's effort will go a long way in improving the quality of Vocational training in the country.

The Executive Director & Staff of NIMI and members of Media Development Committee deserve appreciation for their contribution in bringing out this publication.

Jai Hind

RAJESH AGGARWALDirector General / Addl. Secretary,

Ministry of Skill Development & Entrepreneurship,Government of India.

New Delhi - 110 001


iv

PREFACE

The National Instructional Media Institute (NIMI) was established in 1986 at Chennai by then DirectorateGeneral of Employment and Training (D.G.E & T), Ministry of Labour and Employment, (now under DirectorateGeneral of Training, Ministry of Skill Development and Entrepreneurship) Government of India, with technicalassistance from the Govt. of the Federal Republic of Germany. The prime objective of this institute is todevelop and provide instructional materials for various trades as per the prescribed syllabi NSQF (Level 5)under the Craftsman and Apprenticeship Training Schemes.

The instructional materials are created keeping in mind, the main objective of Vocational Training underNCVT/NAC in India, which is to help an individual to master skills to do a job. The instructional materials aregenerated in the form of Instructional Media Packages (IMPs). An IMP consists of Theory book, Practicalbook, Test and Assignment book, Instructor Guide, Audio Visual Aid (Wall charts and Transparencies) andother support materials.

The trade theory book provides related theoretical knowledge required to enable the trainee to do a job. Thetest and assignments will enable the instructor to give assignments for the evaluation of the performance ofa trainee. The wall charts and transparencies are unique, as they not only help the instructor to effectivelypresent a topic but also help him to assess the trainee's understanding. The instructor guide enables theinstructor to plan his schedule of instruction, plan the raw material requirements, day to day lessons anddemonstrations.

IMPs also deals with the complex skills required to be developed for effective team work. Necessary carehas also been taken to include important skill areas of allied trades as prescribed in the syllabus.

The availability of a complete Instructional Media Package (IMP) in an institute helps both the trainer andmanagement to impart effective training.

The IMPs are the outcome of collective efforts of the staff members of NIMI and the members of the MediaDevelopment Committees specially drawn from Public and Private sector industries, various training institutesunder the Directorate General of Training (DGT), Government and Private ITIs.

NIMI would like to take this opportunity to convey sincere thanks to the Directors of Employment & Trainingof various State Governments, Training Departments of Industries both in the Public and Private sectors,Officers of DGT and DGT field institutes, proof readers, individual media developers and coordinators, but forwhose active support NIMI would not have been able to bring out this materials.

R. P. DHINGRAChennai - 600 032 EXECUTIVE DIRECTOR


v

ACKNOWLEDGEMENT

National Instructional Media Institute (NIMI) sincerely acknowledges with thanks for the co-operation and contribution extended by the following Media Developers and their sponsoring organisation to bring out this IMP (Assignment) for the trade of 1st Year (Volume I of II) Draughtsman civil NSQF Level - 5 under Construction Sector for Craftsman Training Scheme.

MEDIA DEVELOPMENT COMMITTEE MEMBERS

Shri. D. Dhanasekaran - Assistant Director of Training (Retd),ATI, GuindyChennai - 600 032.

Shri. G. Jayaraman - Assistant Training Officer (Retd),Govt. ITI,North Madras, Chennai.

NIMI CO-ORDINATOR'S

Shri. G. Michael Johny - Assistant Manager,NIMI, Chennai-32.

NIMI records its appreciation of the Data Entry, CAD, DTP Operators for their excellent and devoted services inthe process of development of this Instructional Material.

NIMI also acknowledges with thanks, the invaluable efforts rendered by all other staff who have contributed for thedevelopment of this Instructional Material.

NIMI is grateful to all others who have directly or indirectly helped in developing this IMP.


vi

INTRODUCTION

ASSIGNMENT/TESTS

This contains Assignment/Test concerning to the trade theory topic of each exercises of the 1st Year (Volume I of II) Draughtsman civil NSQF Level-5 Trade under Construction Sector. It may be noted that the assignments have direct relationship with the knowledge objectives given in the manual on Trade Practical and also with the contents presented in the manual on Trade Theory. The results of the assignments/tests indicate how far the objectives which are predetermined have been achieved by the learners.

TRADE PRACTICAL

The trade practical manual is intented to be used in workshop . It consists of a series of practical exercies to be completed by the trainees during the 1st Year (Volume I of II) NSQF Level-5 course of the Construction trade supplemented and supported by instructions/ informations to assist in performing the exercises. These exercises are designed to ensure that all the skills in the prescribed syllabus are covered.

The skill training in the shop floor is planned through a series of practical exercises centred around some practical project. However, there are few instance where the individual exercise does not form a part of project.

While developing the practical manual a sincere effort was made to prepare each exercise which will be easy to understand and carry out even by below average traninee. However the development team accept that there if a scope for further improvement. NIMI, looks forward to the suggestions from the experienced training faculty for improving the manual.

TRADE THEORY

The manual of trade theory consists of theoretical information for the 1st Year (Volume I of II) Draughtsman civil NSQF Level-5 Trade. The contents are sequenced according to the practical exercise contained in the manual on Trade practical. Attempt has been made to relate the theortical aspects with the skill covered in each exercise to the extent possible. This co-relation is maintained to help the trainees to develope the perceptional capabilities for performing the skills.

The Trade theory has to be taught and learnt along with the corresponding exercise contained in the manual on trade practical. The indicating about the corresponding practical exercise are given in every sheet of this manual.

It will be preferable to teach/learn the trade theory connected to each exercise atleast one class before performing the related skills in the shop floor. The trade theory is to be treated as an integrated part of each exercise.

The material is not the purpose of self learning and should be considered as supplementary to class room instruction.


vii

CONTENTS

Module No. Module Title Test for Exercises Page

1 Safety 1.1.01 - 1.1.08 1 - 2

2 Basic Engineering Drawing 1.2.09 - 1.2.21 3 - 23

3 Mansonry 1.3.22 - 1.3.24 24 - 37

4 Foundation 1.4.25 - 1.4.30 38 - 45

5 Temporary Structure 1.5.31 - 1.5.32 46 - 49

1.5.33 - 1.5.34 50 - 51

6 Treatment for Building 1.6.35 - 1.6.37 52 - 56

7 Global Positioning System 1.7.38 - 1.7.40 57 - 62


1

Choose the correct answer:

1 Who is concern for safety?

A Nobody's business

B Some body's business

C Every body's business

D The organization business

2 Which is the best method of avoiding accident?

A Wearing safety equipment

B Doing things in one's own way

C Doing things with highly skilled working practice

D Conserving safety percolations related to a job,machine and working place

3 What is the symbol refers in fig?

7 What is the type of Artery shown in figure?

Draughtsman (Civil) Assignment for Exercise 1.1.01 - 1.1.08

A NOISE and vibration

B Biological Hazard

C Ergonomic Hazard

D Physical Hazard

4 What is class 'B' five represents?

A Oil and Fats

B Flammable liquids

C Combust able liquids

D Ordinary solid combustibles

5 What are the combinations of fire?

A Fuel, heat, and gas

B Oxygen, heat and fuel

C Heat, light and energy

D Wood carbon-di-oxide and heat

6 What is ABC stands in first aid?

A Aid, break control

B Avoid, bleeding, control

C Air way, Breathing, granulation

D Accident, Bleeding circulation

A Facial

B Cardio

C Temporal

D Brachial

8 What is the year of regulation at implemented coversin OSH for Explosives?

A 1951

B 1962

C 1971

D 1984

9 What is the name the out most layer of earth?

A Lithosphere

B Atmosphere

C Hydrosphere

D Thermosphere

10 What is the percentage of nitrogen in atmosphericgases?

A 78.03%

B 20.99%

C 15.88%

D 12.41%

11 What is the percentage of super acid in acid rain?

A 30% to 40%

B 45% to 60%

C 55% to 65%

D 60% to 70%

12 What is the percentage of water vapor? Which causesin organ house gases?

A 86% - 70%

B 25% - 65%

C 15% - 60%

D 10% - 50%


2

13 What is the Expansion format for first aid CPR?

A Care, Prevent, rescue

B Cardio, Pulse, reassurance

C Circulation, promote, Recover

D Cardio, pulmonary, resuscitation

14 What is the term of hazards that arises on the surfaceof earth in tremors, earthquakes forest fires etc?

A Physical hazard

B Chemical hazard

C Terrestrial hazard

D Atmospheric hazard

15 5S is a japanese methodology for work placeorganization in which seiketsu represents to what?

A Set

B Sort

C Shine

D Standardize

16 Which is the occupational health hazard?

A Poor Training

B Inadequate safety

C Lack of knowledge

D Improper handling technique of machines

17 What should be done to stop bleeding an inuredperson?

A Tie bandage

B Apply ointment

C Apply tincture our the wound

D Apply pressure our the wounds

18 What is the name of effort to be followed before accidentin preventive approach?

A Investigation

B Statistical monitoring

C Find accident causes

D Identification of hazards

19 How occupational disease occured in the industrialenvironment?

A Negligence

B Lack of knowledge

C Improper handling of machines

D Person exposed to substance or process

20 In first aid 'ABC' what is 'B stands for….

A bed

B bottle

C breathing

D bothering

Construction : Draughtsman Civil (NSQF Level-5) Assignment for Exercise 1.1.01 - 1.1.08


3

Choose the correct answer

1 Which body is propagating crafts man training scheme?

A N E F T

B N I M I

C N C V T

D S T R A I

2 What subject is impart in the course area of CTS?

A WSC

B Trade theory

C ET, WSC, Trade theory, Employability skills

Draughtsman (Civil) Assignment for Exercise 1.2.09

3 In which semester the use of GPS and application ofparley work is taught

A 1st semester

B 2nd semester

C 3rd semester

D 4th semester


4


1 Which is the universal graphical language of engineersto speak, reed and write on its own way?

A Art drawing

B French language

C English language

D Engineering language

2 Which is the idioms of engineering drawing?

A Symbols

B Projections

C Type of lines

D Conventional practice

3 Can computer replace the drawing board andequipments as leering tool …

A Yes, it can replace as learning tool

B No, it cannot replace as learning tool

C Necessary soft ware and hard ware is available. Itcan be replaced

D In some cases it can be replaced and in some casesit cannot be replaced

4 What is the size (LXWXT) of B1, drawing board?

A 150 x 1000 x 25

B 700 x 500 x 15

C 1000 x 700 x 25

D 500 x 300 x 15

5 What size of drawing sheet is most convenient fordrawing purpose in the class room?

A A1

B A2

C A3

D A4

6 What is the ratio of width and length of bawling sheet?

A 1 : 1

B 2:1

C 3:1

D 1 : 2

7 What is the main use of the dividers?

A It replaces the compasses

B It is used to draw construction of circles

C It sets the dimensions from scale to drawing

D Its sharps edges are used to clean the other drawinginstruments

8 What size of scale can be used for 1: 2 ratios?

A M1

B M2

C M3

D M4

9 For drawing, how the drawing pencils are selected?

A grade

B length

C diameter

D Colour of lead

10 Which grade of pencil is used for sketching?

A H

B 2H

C 2B

D HB

11 What is the standard thickness of border lines for alltypes of drawing sheet?

A 0.60mm

B 0.70mm

C 0.80mm

D 1.00mm

12 What is the left margin for A2 drawing sheet?

A 40mm

B 30mm

C 20mm

D 15mm

13 Which case the proverb practice makes perfects?

A Design sketching

B Computer drawing

C Free hand sketchimg

D Solid geometrical drawing

Draughtsman (Civil) Assignment for Exercise 1.2.10 to 1.2.15


5

14 How a horizontal line should be drawn?

A right to left

B Left to right

C Better to rotate the paper at 90°, then draw linestop to bottom.

D Draw horizontal line turning the paper to a convenientangle

15 How the letters and numerals are designated?

A By their width

B By their heights

C By their width and height

D According to the size of paper

16 Which type of line is used to draw extension lines?

21 What is the colour code for glass in drawing?

A Blue

B Black

C Green

D Cobalt blue

22 Which symbol denotes brick?

17 What type of line is used to symbolize the surface towhich a specil requirement applied?

18 Name the line with thin chains thick at ends?

A Centroidal lines

B lines of symmetry

C Cutting plane lines

D Out lines of adjacent parts

19 What is the colour code for brick material?

A Vermilion

B Cobalt blue

C Payers grey

D Harbors green

20 What is the colour code for earth in drawing?

A Sepia

B Cobalt blue

C Payers gray

D Burnt sienna

23 What is the name of the material for the symbol shownin Fig?

A Brick

B Earth

C Partition blocks

D Reconstructed stone

24 Indentify the name of material for the symbol shown infig?

A Concrete

B hard core

C insulation board

D Reconstructed stone



6

25 What is the name of material for the symbol shown infigure?

27 Indentify the name of the symbol shown for doors?

30 Which symbol denote intersecting chamber?

31 What is the name of the symbol shown in figure?

A Plaster product

B insulation boards

C hard core

D earth

26 Which symbol denotes single leaf double swing indoors?

A Door with projected hinge

B Rolling shutter external

C Rolling shutter internal

D Revolving door

28 Identify the symbol for trough lavatory wall type?

29 Identify the symbol for double sink with double drainboard?

A Vent in let

B Vent out let

C Unit Header

D Convector


A Floor trap

B Urinal stalls

C Urinal bowls

D Drinking fountain wall type



7

33 Which is the symbol for convector? 38 Which is the symbol for village cart track?

34 What is the colour code for the conventional sign ofchain line?

A Black

B Burnt umber

C Crimson cake

D Prussian blue

35 What is the colour code for the conventional sign ofwell in the drawing?

A Black

B Burnt umber

C Crimson cake

D Prussian blue

36 Identify the symbol of wood fencing convention used indrawing?

39 Which in the symbol for Railway Bridge?

37 Identify the name of the symbol used in the drawing?

40 Indentify the name of the symbol shown in figure?

A Orchard

B Sand hill

C Barren land

D Cultivated land

A Master clock

B Microphone out let

C Impulse clock out let

D Synchronous clock Out let

41 What is the name of the symbol shown in the drawing?

A Ceiling fan

B Bracket fan

C Exhaust fan

D Fan regulator



8

42 Which is the symbol for main fuse board withoutswitches power?

A Bell

B Buzzer

C Bell bush

D Telephone

47 Identify the name of the arrangements of dimensionedvalues shown in figure?

43 Identify the name of switch symbol shown in figure?

A Chain dimensioning

B parallel dimensioning

C Combined dimensioning

D Supper imposed dimensioning

48 What is the name of the dimensioning arrangementsshown in figure?

A Chain dimensioning

B Parallel dimensioning

C Combined dimensioning

D Supper imposed dimensioning

49 What will be the length of arrow when the width of arrowis 'X' unit?

A 3 x unit

B 2 x unit

C 3.5 unit

D 1.5 x unit

A Pull switch

B Two way switch

C One way switch

D Intermediate switch

44 What is the name of the symbol shown in the figure?

A Meter

B Light Bracket

C Bath lamp holder

D Single light pendant


A Thermostat

B Immersion heater

C Electric unit heater

D Immersion heater with thermostat

46 that is the name of the symbol shown in figure…



9

50 In dimensioning feature which way of writing incorrect?

A 30r

B R30

C 30R

D R=30

51 Which dimensioning is drawn incorrectly?

A 8

B 15

C 16

D 30

52 Name the arrangements of the dimensional values?

A Chain dimension

B Combined dimensions (chain and parallel)

C chain and supper imposed running dimension

D Supper imposing dimensioning in one direction



10


1 What is the properties of a scalene triangle?

A One angle is 90°

B Two angles are equal

C Three sides are equal

D All angles and sides are not equal to each other

2 In which Quadrilateral all the sides are equal and anglesare not at right angles?

A Rhombus

B Trapezoid

C Rhomboid

D Rectangle

3 In which Quadrilateral the opposite sides are paralleland equal, but angles are not at right angle?

A Rhombus

B Trapezoid

C Rhomboid

D Trapezium

4 Name the polygon which is bounded by 9 sides?

A Nonagon

B Decagon

C Hexagon

D Heptagon

5 What is the name of the straight line between two pointson the curve of a circle passing through the center?

A chord

B Sector

C Radius

D Diameter

6 What is the name of the part of circle bounded by tworadii and its arc?

A Circle

B Sector

C Segment

D semi circle



11


1 What is the name of the term to the ratio of the distancebetween any two prints of the object on the drawing tothe actual distance between the same points of theobject?

A Fraction

B Proportion

C Comparison

D Representative Fraction

2 What is the name of the scale which in denoted1: 200?

A Full scale

B Plain scale

C Reduced scale

D Enlarged scale

3 What is the name of the scale which is denoted by5:1?

A Full scale

B Plain scale

C Reduced scale

D Enlarged scale

4 Which units used in maps?

A m

B cm

C mm

D Km

5 What is the name of scale shown in figure?

A Vernier

B Plain scale

C Scale of chords

D Comparative scale

7 What is the name of the scale shown in figure?


A Plain scale

B venire scale

C Diagonal Scale

D Comparative scale

6 What is the name of the scale shown in figure?

A Vernier

B Plain scale

C Scale of chords

D Comparative scale

8 Which units used in site plan and surveys?

A m

B cm

C dm

D mm

Properties of Materials

9 Under which classification material clay product falls?

A Civil

B Electrical

C. Electronic

D Mechanical

10 What is the name of the property that hardnessbelongs?

A Thermal property

B Physical property

C Chemical property

D Mechanical property


12

11 What is the name of the term that is defined as themass of a material per unit of volume?

A Density

B Durability

C Specific gravity

D Hygrostat capacity

12 What is the name of the property that it is the capacityof material to allow water to pass through it underpressure?

A Porosity

B Permeability

C Hygroscopicity

D Water absorption

13 What is the name of the term that it is the resistanceof material to destruction by natural agencies?

A Density

B Porosity

C Durability

D Permeability

Building Stones

14 What is the name of the characteristics of the stone ifit present greater extent which makes unsuitable forbuilding construction?

A Grain

B Compacters

C Resistance to fire

D porosity and absorption

15 What is the name of the rock that are formed by coolingand solidifying of the rock masses from their moltenmagmatic condition of the material of earth?

A Mountain

B Igneous rocks

C Sedimentary rocks

D Metamorphic rocks

16 What is the name of the rocks that the main constituentis clay?

A Igneous

B Siliceous

C Calcareous

D Argillaceous

17 What is the name of the test it determine the toughnessof a stone?

A Impact test

B Attrition test

C Smith test

D Freezing and thawing test

18 What is the name of the test that to determine thedurability or weathering quality?

A Impact test

B Smith's test

C Crushing test

D Crystallization test

19 What is the name of the stone that can be used forsteps, sill's, column, ballast etc?

A chalk

B Gneiss

C Kankar

D Granite

20 What is the name of the rock that kankar stone belongs?

A Igneous

B Metamorphic

C Sedimentary

D Stratified quarrying (building stones)

21 What is the name of the tool shown in figure?

A Drill

B Dipper

C Steal point

D Rachet boring machine

Construction : Draughtsman Civil (NSQF Level-5) Assignment for Exercise 1.2.17


13

22 From the figure electrical detonator name the partdenoted by letter 'X’.

Dressing of stones

26 What is the name of the dressing of stone conventionshown in figure?

A plug

B fuse head

C copper wire

D insulating wire

23 What is the name of the explosive which consist of75% nitroglycerin mixed with 25% sandy earth to forma thick paste?

A Cordite

B Dynamite

C Rock - Rock

D Blasting powder

24 Which explosive has 65% potassium nitrate, 20%sculpture and 15% charcoal?

A Cordite

B Dynamite

C Rock-Rock

D Blasting powder

25 What is the name of the quarrying tool shown in figure?

A Jumper

B Crow bar

C Claying iron

D Tamping bar

A dragged finish

B Furrowed finish

C Reticulated finish

D Hammer dressed finish

27 Convention of stone finish is shown in figure. What isthe name of the dressing of stone?

A Molded finish

B Tooled Finish

C Boasted finish

D Dragged finish

28 What is the name of the dressing of stone conventionshown in figure?

A Dragged finish

B Furrowed finish

C Reticulated finish

D Hammered dressed finish

Clay products

29 What is the name of processing that the top layer ofsoil about 20 cm in depth is taken out and thrown away?

A Digging

B Cleaning

C UN soiling

D Weathering



14

30 What is the name of process that the clay is madeloose and any ingredient to be added to it makes theclay for next stage?

A Blending

B Clearing

C Tempering

D Weathering

31 What is the name of the kiln shown in figure?

34 What is the name of the brick shown in figure?

A Hoffman's kiln

B Bulls trench kiln

C Intemittent kiln

D Intemittent down draught kiln

32 What is the name of the kiln shown is figure?

A cant

B Bull nosed

C Perforated

D Rounded nosed

35 What is the name of the brick shown in the figure?

A Tunnel kiln

B Hoffman's kiln

C Bull's trench kiln

D Intermittent down draught kiln

33 Which class of brick is used for temporary building?

A 1st class bricks

B 2nd class bricks

C 3rd class bricks

D 4th class bricks

A Cant

B Bull nosed

C Perforated

D Rounded nosed

Lime

36 What is the name of class of lime which can be usedfor structural work such as arches, domes etc?

A Class a

B Class b

C class c

D class d

37 What is the name of class of lime which can be usedfor finishing coat in plastering and white washing?

A class a

B class b

C class c

D class d

38 What is the name of test that is to assess theclassification and calcium-carborate content of thelime?

A Ball test

B Plasticity test

C Workability test

D Hydrochloric test



15

39 What is the name of the test that is to assess theclassification of lime?

A Ball test

B Plasticity test

C Workability test

D Hydrochloric test

Cement

40 What will be the temperature in burning the cement inmanufacture zone?

A 1400°c to 1500°c

B 1500°c to 1600°c

C 1600°c to 1700°c

D 1700°c to 1800°c

41 What is the name of cement which possess mediumrate of strength developed less resistance to chemicalattack?

A Coloured cement

B Expanding cement

C High alumina cement

D Ordinary port land cement

42 Name the type of cement that is setting time not lessthan 30 minutes, final setting 10hrs and feature is mixconcrete structure?

A blast furnace cement

B Hydro phobic cement

C acid resistance cement

D ordinary portland cement

43 Name the type of cement which completely resistantto the action surface, forms in chemical plants andfurnace?

A Hydrophobic cement

B Blast furnace cement

C High alumina cement

D Modified port land cement

44 What is the name of cement suitable for cold weatheringconcrete?

A Expanding cement

B Extra rapid hardening cement

C Rapid hardening port land cement

D Sulphate resistant port land cement



16


1 What is the name, if various points on the contour ofone object are thrown forward on to a plane by meansof straight lines or visual rays?

A view

B images

C Shadow

D Projection

2 What is the name of the projection in which threedimensions of a solid are not only in one view, but theiractual sizes can be measured directly form it?

A oblique projection

B Diametric projection

C Isometric Projection

D perspective projection

3 What is the name of the projection in which from theobject are perpendicular to the plane of projection?

A Oblique projection

B Isometric projection

C Perspective projection

D Orthographic projection

4 What is the name of the projection when the plane isbetween the eye of the observer and plane of projection?

A Parallel projection

B Pictorial projection

C 1st angle projection

D 3rd angle projection

5 What is the name of the projection when the object isplaced in between the eye of the observer and plane ofprojection?

A Parallel projection

B 1st angle projection

C 2nd angle projection

D 3rd angle projection

6 What is the symbol represents?


A Pictured projection

B 1st angle projection

C 3rd angle projection


7 What type of perspective will be obtained when thepicture plane in between the object and the stationpoint?

A Larger perspective obtained

B Shorter perspective obtained

C Normal perspective obtained

D Reversed perspective obtained

8 When a line is parallel to the plane of projection whatwell be the status of line?

A It is mere a point

B More length as that of line

C Same length as that of line

D Foreshortened length as that of line

9 When a line is perpendicular to the plane of projectionwhat will be the projection?

A It is mere a point

B More length as that of line

C Same length as that of line

D Shorter length as that of line

Geometrical Solids

10 What is the name of the solid having four equilateraltriangular faces solid having least number of flatsurfaces?

A Polyhedron

B Octahedron

C Hexahedron

D Tetrahedron

11 What is the name of the geometrical solid when arectangle is rotates about one of the side?

A cone

B sphere

C Frustum

D Cylinder


17

12 What will be the name of the solid when a semicirclerotates about its Diameter?

A Cone

B Sphere

C Frustum

D Cylinder

13 In what projection the three faces make unequal angleswith the plane of projection?

A di-metric

B Trimetric

C Isometric

D Axonometric

14 In what projection the two faces made equal angle?

A di-metric

B Trimetric

C Isometric

D Axonometric

15 What is the name of projection in which objects areperpendicular to the plane of projection?

A Cabinet projection

B pictorial projection





18


1 Name the type of sand that is excavated from a depthof about 1 m to 2 m from the ground level?

A Pit sand

B River sand

C Sea sand

D Artificial sand

2 what is the name of the sand that posses through asieve with clear opening of 1.5875mm, and uses forplastering?

A Fine sand

B Coarse sand

C Gravelly sand

D Mountain sand

3 Name the sand which posses through a sieve with clearopening of 3.17mm and used for masonry work?

A Fine sand

B Coarse sand

C Gravelly sand

D Mountain sand

4 Name the type of sand which consists fine roundedgrain sand?

A Pit sand

B River sand

C Sea sand

D Mountain sand



19


1 What is the name of the term for ordinary cooking potsand pans usually used in villages?

A Porcelain

B Terracotta

C Stone ware

D Earth ware

2 What is the name of the term for hard burnish unglazedvitrified ceramic metal used for architecturalornamentation?

A Porcelain

B Terracotta

C Stone ware

D Earth ware

3 What is the name of tile that is used for bath room inhospitals?

A Vitrified tiles

B Porcelain tiles

C Fully vitrified tiles

D Glazed cornice tiles

4 What is the name of the tile shown in figure?

5 What is the name of the tile shown in figure?


A Country tile

B Porcelain tile

C Allahabad tile

D Mangalore tile

6 Which type of clay material product is used for themanufacture of spark plugs?

A Quantize

B Static porcelain

C Zircon porcelain

D Cordierite porcelain

7 What is the name of the clay product that is used forelectric furnace, refractory bricks etc.

A Carbon brick

B Static porcelain

C Zircon porcelain

D Cordierite porcelain

8 What is the name of the material which melting pointis 1200°c and used for preparing fire bricks?

A Bauxite

B Dolomite

C Magnesia

D Chromite

9. What is the name of the element available in the formof sand and melts at 1730°c?

A Silica

B Fire clay

C Dolomite

D Quartzite

A Country tile

B Porcelain tile

C Allahabad tile

D Mangalore tiles


20

10 What is the name of the material that is oxide of ironand its melting point is 2180°c?

A Carbon

B Bauxite

C Chormite

D Forst rite

Mortar concrete

11 What is the name of the mortar and ratio used for thickjoints in stone masonry?

A Cement sand mortar 1:2

B Cement sand mortar1:1 to 1:2

C Hydraulic lime sand mortar -1:2:3 ratio

D Lime Surkhi or 1:5 to 1:6 cement mortar

12 What nature of work 1:11/2 cement and sand mortar isused?

A Pointing work

B Reinforced brick work

C R.C.C tanks and other retaining structure

D Damp proof course and cement concrete roads

13 What is the name of the building material that the usualproportion of cement to the lime volume is 1:6 - 1:8?

A Gypsum

B Surkhi mortar

C Cement mortar

D Gauged mortar

14 What is the name of the material that should not affectthe durability of materials, set quietly so that speed inconstruction may be achieved?

A Gypsum

B Surkhi mortar

C Cement mortar

D Gauged mortar

Plain cement concrete

15 What will be the proportion of concrete mix for heavilyloaded R.C.C column and R.C.C arches of long span(The aggregate 12 to 20 mm)

A 1:2:2

B 1:2:3

C 1:2:4

D 1:2:6

16 What will be the proportion of concrete mix for thecompressive strength of 10N/mm2?

A 1:1:2

B 1:2:4

C 1:3:6

D 1:11/2:3

17 What will be the grade of concrete for dry aggregatesby mass per 50kg of content of cement to be taken asthe of individual masses of fine and coarse aggregatemaximum 800 kg?

A M5

B M75

C M10

D M20

18 What is the recommended slumps (mm) of concretefor road construction?

A 10 to 25

B 20 to 40

C 40 to 50

D 70 to 80

19 What is the recommended slumps (mm) for concretethe cannaling?

A 20 to 40

B 40 to 50

C 70 to 80

D 80 to150

20 What is the name of defect that will occur due to excesswater, alkali aggregate, corrosion of steel and freezingof water?

A Cracks

B Crazing

C Efflorescence

D Sulphate deterioration

21 What the name of the defect in concrete due to flow ofmixing water within or emergence to the surface?

A Cracks

B Crazing

C Laitance

D Bleeding



21

22 What is the name of special type of concrete in whichgas or air bubbles are introduced in to the plastic cementmortar mix to produce a material with a structure?

A No-fire concrete

B Cellular concrete

C Ready mixed concrete

D Heavy weight concrete

23 Name of type of concrete using high density aggregateproduced from magnetic and hematite?

A No-fire & concrete

B Prestressed concrete

C Ready mixed concrete

D Heavy weight concrete

24 What is the name of the speed type concrete which ishighly impermeable and resistant to attack by acidalkalis and other chemicals?

A polymer concrete

B Pre stressed concrete

C Ferro cement concrete

D Fibre reinforced concrete



22


1 What is the name of the projection in which one of thefaces of the object kept parallel to the plane of projectionand the projectors are include to both HP and VP?




D Axnometric projection

2 How the curved features like circle etc are replaced inoblique projection?

A Elliptical shape

B Foreshortened view

C True shape by free hand

D True shape using compass

3 What is the name of the projection that the recedingline of the oblique is drawn in 1:1 ratio?


B Oblique projection

C Di-metric projection

D Cavelier projection

4 What is the name of the projection the recoding line ofthe oblique view is drawn in 1:2 ratio?


B Cavalier projection

C Di-metric projection

D Tri-metric projection

Perspective Protection

5 What is the name of projection shown in figure?


Oblique protection



C Tri-metric projection

D Perspective projection

6 What is the name of the perspective view shown infigure?

A One point perspective

B two point perspective

C Three point perspective

D Multi view methods

7 What is the name of perspective projection in whichthe vertical faces of object are at angle to the pictureplane have while the bottom face parallel to the groundplane?

A One point perspective

B Two point perspective

C Three point perspective

D Axonometric projection


23

8 What is the name that it is the (Imaginary) verticalplane, resting between the station point and the objectbeing viewed?

A Ground plane

B Picture plane

C Horizon plane

D Auxiliary ground plane

9 What is the name of the plane that it is an imaginaryplane, at the level of the eye is station point and theplane is about the ground plane and at right angles tothe picture plane?

A Ground Plane

B Horizon plane

C Auxiliary ground plane

D Central plane

10 What is the name of point where the observer eye islocated while viewing the object?

A Vanishing point

B Station point

C Center of vision

D Position of station point

Admixture of Concrete and Application

11 What is the name of admixture contains soaps ofcalcium or ammonium citrate and petroleum products?

A Grounding add mixtures

B Damp proofing admixture

C Hydration control admixture

D Banding admixtures

12 What is the name of the admixture consists of acrylicpolymar?

A Forming agent

B Banding mixtures

C Antic washout admixtures

D Hydration control admixtures

13 What is the name of the admixture consists of cellolos,acrylic polymer?

A Forming agent

B Banding mixture

C Antic wash ant admixture

D Hydration control admixture

14 What is the name of the admixtures consists ofpolyoxyalkylene, alkylether, propyleneglycol?

A Water reducer

B Shrinkage reducer

C Water reducer and trader

D Water reducer high rouge and retarder



24


1 What is the name of the figure shown? 5 What is the name of term labeled as 'x'?


Timber and wood products

A Storage godown

B Natural seasoning of timber

C Artificial seasoning of timber

D A shed for air seasoning of timber

2 In which type of seasoning the timber is immersed in asolution of suitable salt and seasoned in ordinary way?

A water seasoning

B Boiling seasoning

C Chemical seasoning

D Artificial seasoning

3 What is the name of defect shown in figure?

A Cup shakes

B Star shakes

C Ring shakes

D Heart shakes

4 What is the name of the defect shown in figure?

A Knot

B Pith

C Bark

D Heart

6 What is the name of the defect which occurs in theseasoning of wood is indicated by the curvature formedin to direction of length?

A Cup

B Bow

C Split

D Collapse

7 What is the name of the defect occur while seasoningof wood that exposed surface of timber dries quicklyand the interior surface not completely dried?

A Cup

B Bow

C Split

D Case hardening

8 What is the name of the board shown in figure?

A Cup shakes

B Star shakes

C Ring shakes

D Radial shakes

A Block board

B Batten board

C Ply wood board

D Laminated Board


25

9 What is the name of board shown in figure? 13 What is the name of the asphalt that is obtained bythe fractional distillation of aide petroleum oil?

A Lake asphalt

B Rock asphalt

C Residual asphalt

D Mastic asphalt

14 What is the name of the asphalt which is produced byheating asphalt with sand and mineral filler and for waterproofing?

A Lake asphalt

B Rock asphalt

C Mastic asphalt

D Cut back asphalt

15 What is the name of material which in being distilled ina definite viscosity or penetration without furthertreatment?

A Bitumen emulsion

B Blown bitumen

C Plastic bitumen

D Straight run bitumen

16 What is the name of the material which used for fillingcracks in masonry structures, for stopping leakages?

A Burnt bitumen

B Cut back bitumen

C Plastic bitumen

D Straight run bitumen

A Block board

B Batten board

C Plywood board

D Laminated board

10 What is the name of the wood which colour is showingreddish brown, easy to work and takes good polish,after seasoning it's weight is about 7200 N/mm2?

A Teak

B Sandal

C Ben teak

D Mahogany

11 What will be the high density of MDF panel?

A 500-520 kg/m

B 600-600 kg/m

C 650-680 kg/m

D 700-720 kg/m

12 What is the name of tar which is used for macadamroads preserving timber etc?

A Coal tar

B Mineral tar

C Wood tar

D bitumen



26


1 What is the name of material that the function of it's tothe paint then so that it easily applied on the surface?

A Tung oil

B Varnish

C Poppy oil

D Turpentine

2 Which type of paint is applied for iron work under water?

A Asbestos paint

B Cellulose paint

C Aluminum paint

D Bituminous paint

3 What is the name of paint which is used for dials ofwatch?

A Graphite paint

B Cellulose paint

C Emulsion paint

D Luminous paint

4 Which type of paint is used for the surface contactwith high cold and heat?

A Cement paint

B Graphite paint

C Colloidal paint

D Cellulose point

Metal and alloys

5 What is the name of the form of steel used for structuralsteel work, having equal angles, unequal section?

A I section

B T section

C Angle section

D Channel section

6 What is the name of the form of steel suitable for beamslintels columns etc?

A I section

B T section

C Angle section

D Channel section

7 What is the name of the alloy consists of copper 82%and tin 18%?

A Brass

B Bell metal

C Gun metal

D Dow metal

8 What is the name of alloy, consist of magnesiummanganese and aluminium?

A Brass

B Bronze

C Gun-metal

D Dow metal

Plastics

9 What is the name of the plastic which possess a highmodules of elasticity and retain slope under exteriorstress applied at normal of moderately increasedtemperature?

A Esterners

B Soft plastics

C Rigid Plastics

D Semi-rigid plastics

10 What is the name of the plastic which is derived fromvarious compounds and the plastic made from this arelike glass, tough, strong and possess doctrinalproperties It's obtain in different colours?

A Alkyd

B Styrene

C Celluloses

D Coumarone - Indent

11 What is the name of the resin mode from glycerin andophthalmic properties It cools Slowly and possesselectricity properties?

A Alkyd

B Styrene

C Celluloses

D Coumarone


Protective material - paints and varnish


27

12 What is the name of the resin derived by the perceptionof milk with acids it's used for buckles and buttons?

A Casein

B Styrene

C melamine

D Celluloses

13 What is the name of the resin which is carbolic acidand is prepared from this lightly resistant in heat andpossess both mechanical and electrical properties?

A Area formaldehyde

B Phenol formaldehyde

C Phenol Farfuraldhyde

D Melanie-Formaldehyde



28


1 What is the name of the part labeled as letter 'X' in thefigure?

A Plinth

B Foundation

C Plinth course

D String Course

2 What is the name of the part labeled as 'X' in the figure?


Sequence of construction of building

A Sill

B Plinth

C Frieze

D Cornice


29

3 What is the name of part labeled by letter 'x'? 5 What is the name of the part of the building which is ahorizontal member of stone, wood, brick, steel,reinforced brick, R.C.C above the opening is to supportthe masonry or load above?

A Sill

B Lintel

C Floors

D Parapet

6 What is the name of the part which is covering of bricksor stone which is placed on the exposed top of anexternal wall to prevent seepage of water through jointsof top most counsel of wall?

A Sill

B Roof

C Parapet

D Coping

7 What is the name of the part which the wall built arounda flat roof, and act as protective wall of the users ofterrace?

A Plinth course

B Parapet

C Coping

D Lintel

Masonry

8 What is the name of the technical term when a bricklaid with its length parallel to the face of the wall?

A Closer

B Header

C Stretcher

D Queen closer

9 What is the name of the technical term when a bricklaid with its breadth or width parallel to the face of wall?

A Closer

B Header

C Stretcher

D Quoin closer

10 What is the technical name for the horizontal distancebetween the vertical joints in successive course?

A Lap

B Bed

C Bed joint

D Perpends

A Comice

B String Course

C Plinth course

D Blocking Course

4 What is the name of part labeled by letter 'X'?

A Comice

B String course

C Plinth course

D Blocking course



30

11 What is the name of the component labeled as letter'x' in figure?

A Header

B Stretcher

C Quoin header

D Quoin stretcher

12 What is the name of the component labeled as letter'x' in the figure?

A Header

B Stretcher

C Quoin header

D Quoin Stretcher

13 What is the name of the component labeled as letter'x' in the figure?

A Lap

B Perpends

C Bed joint

D Queen closer

Stone masonry

15 What is the name of the masonry in which regularstones of square or rectangular shape with accuratebed joints are used?

A Rubble masonry

B Ashlars masonry

C Ashlars fine masonry

D Ashlars rocker quarry faced

16 What is the name of the masonry in which stones areused as they are available from the quarry, it is mostlyused for compound wall, godowns and garages etc?

A Dry rubble masonry

B Flint rubble masonry

C Random rubble masonry

D Uncoursed rubble masonry

17 What is the name of the masonry shown in figure?

A Lap

B Perpends

C Bed joint

D Queen closer

14 What is the technical form of the component labeledas letter 'x' in the figure?


B Coursed rubble masonry

C Coursed rubble (1st sort)




31

18 Identify the name of masonry shown in figure? 21 What is the name of the masonry show in figure?

A Ashlar fine

B Ahlar chamfered

C Ahlar rock or quarry faced

D Ashlar rough tooled (bastard ashlar)

22 Identify name of the masonry shown in figure?

A Ashlar fine

B Ashlar Chamfered

C Ashlar rock or quarry faced

D Ashlar rough tooled (bastard ashlar)

Joints in stone masonruy

23 What is name of the stone joint commonly used forordinary works?

A Butt joint

B Tabled joint

C Rebated joint or lap joint

D Tongued and grooved joint

24 What is the name of joint used in stone masonry forarch work?

A Butt joint

B Tabled joint

C Rebated jointer lap joint

D Tongued and grooved joint or joggled joint

A Flint rubble masonry

B Dry rubble masonry

C Random rubble masonry

D Polygonal rubble masonry





19 Identify the name of the masonry shown in figure?





20 What is the name of the masonry shown in figure?



32

Brick Masonry

30 What is the technical term when a brick is cutlongitudinally in two parts?

A Queen closer

B King closer

C Mitred closer

D Bevelled closer

31 What is the technical term when a brick is cut atriangular potion of the brick such that half header andhalf stretcher are obtained on the adjoining cut face?

A King closer

B Bevelled bat

C Mitred closer

D Bevelled closer

32 Identify the technical term that cutting a triangularportion of brick through the width at a angle of 45° to60° with the length of brick?

A king closer

B Mitred closer

C Bevelled closer

D Queen closer

33 Identify the name of brick that cutting a triangular portionof half the width but of full length?

A King closer

B Queen closer

C Mitred closer

D Bevelled closer

34 Identify name of the brick shown in figure?

25 What is the name of the joint that is used to protectthe joint of cornice?

A Plugged joint

B Cramped joint

C Dowelled joint

D Saddle or rusticated joint

26 What is the name of the joint that which prevent lateralmovement it is used in structures lines seawall wherelateral pressure is more?

A Butt joint

B Tabled joint

C Plugged joint

D Dowelled joint

27 Identify the name of the joint shown in figure?

A Bevelled bat

B Queen closer

C King closer

D Mitred closer

A Butt joint

B Tabled joint

C Rebated joint or lap joint

D Tounged and grooved joint or joggled joint

28 What is the name of the stone joint shown in figure?

A Plugged joint

B Cramped joint

C Dowelled joint

D Restricted joint

29 Identify the name of joint shown in figure?

A Plugged joint

B Cramped joint

C Dowelled joint

D Restricted joint



33

35 What is the technical term of the brick shown in figure? 40 What is the name of the bond in which all the bricksare arranged in header course?

A Header bond

B English Bond

C Flemish bond

D Stretcher bond

41 What is the name of the bond shown in figure?

A Dutch Bond

B Rat trap bond

C Zigzag bond

D Brick on edge bond


A Dutch bond

B Rat trap bond

C Zigzag bond

D Brick on edge bond

A Half bat

B Bevelled bat

C Three quarter bat

D Bevelled closer

36 What is the technical term of the brick shown in figure?

A Queen closer

B King closer

C Mitred closer

D Bevelled closer

Types Of bonds

37 What is the name of the bend in which alternate courseconsists of headers and stretchers?

A English bond

B Flemish bond

C Stretcher bond

D Header Bond

38 What is the name of the bond in which every courseheaders and stretchers are placed alternatively?

A English bond

B Header bond

C Flemish bond

D Stretcher bond

39 Identify name of the bond in which all the bricks arearranged in stretcher course?

A Header bond

B English Bond

C Flemish bond

D Stretcher bond



34

A Dutch bond

B Header bond

C English bond

D Flemish bond


A Dutch bond

B Header bond

C English bond

D Flemish bond

46 What is the name of bond shown in figure?

A Dutch bond

B Header bond

C English bond

D Flemish bond

47 What is the name of the junction made by two wallsmeet each other than a right angle?

A Tee junction

B Cross junction

C Squint junction

D Acute squint quoin

48 What is the name of the form of junction shown in fig?

A T-junction

B Cross junction

C Squint junction

D Quoin one brick wall

43 Identify the name of bond shown in figure?

A Dutch bond

B Header bond

C English bond

D Flemish bond

45 Identify the name of bond shown in figure?



35

49 Identify the name of junction shown in figure?

A T-junction

B Cross junction

C Squint junction


50 What is the name of junction shown in figure?

A T-junction

B Cross junction

C Squint junction


51 Identify the name of the junction shown in figure?

A Acute squint

B Obtuse Squint

C Cross junction

D Squint junction

Reinforced masonry

53 What will be the name of walls up to 6m height can beconstructed using various types of brick walls and filledhollow blocks, with a drained granular fill?

A Reinforced retaining wall

B Reinforced masonry lintel

C Reinforced rubble masonry

D Reinforced masonry wall of concrete fill

54 What is the name of the wall shown in figure?

A Reinforced retaining wall

B Reinforced masonry wall

C Reinforced masonry lintel

D Reinforced rubble masonry


A T-junction

B Cross junction

C Squint junction


52.What is the name of the junction shown in figure?

A Hollow clay brick

B Hollow concrete brick

C Cellular concrete brick

D Perforated clay brick



36

58 What is the name of brick shown in figure?

A Hollow clay bricks

B Cellular clay bricks

C Hollow concrete bricks

D Cellular concrete bricks

Composite masonry


56 Identify the name of the brick shown in figure?

A Hollow clay brick

B Hollow concrete brick

C Cellular concrete brick



A Hollow clay brick

B Hollow Concrete brick

C Cellular Concrete brick


A Stone facing with backing

B Stone facing with rubble backing

C Brick facing with concrete backing

D Facing of brick work and backing of ashlarsmasonry


A Stone facing with brick backing



D Facing of brick with ashlars masonry



37

61 Idententify the name of the wall shown in figure?

A Stone facing with brick backing



D Facing of brick with ashlar masonry

Tools and equipment used in Brick masonry

62 What is the name of the tool that is used for cuttingsoft bricks and dressing the surface of the brick?

A Trowel

B Scotch

C Brick axe

D Brick hammer

63 What is the name of the tool used for setting angle?

A Bevel

B Plumb rule

C Masons square

D 1meter u folded rule



38


1 What is the name of the term for the exploration,consists of driving either a hollow tube or a steel rod oran iron in to the ground?

A Probing

B Deep boring

C Wash boring

D Sub-surface surrounding

2 What is the name of the form in which a casing isdriven in the ground and the material brought to thesurface for inspection?

A probing

B Deep boring

C Wash boring

D Sub-surface-sounded

3 What is the name of the term which is essential tocarry out this for big important engineering such asdams?

A Probing

B Deep boring

C Wash boring

D Sub-surface-sounding



A Shell auger

B Screw auger

C Post-hole auger

D Wash boring auger

6 Identify the name of tool shown in figure?

A Shell auger

B Screw auger

C Post-hole auger

D Wash boring auger

Bearing capacity of soil

7 What is the term for the load of the material used forthe various components of a building such as walls,floor roof etc?

A Live load

B Dead load

C wind load

D Abstract load

8 What the term for the movable load on the floor and it’svariable?

A Live load

B Dead load

C wind load

D Abstract load


Foundation site exploration

A Shell auger

B Screw auger

C Post-hole auger

D Wash boring auger


39

9 Which method increasing the bearing capacity of soil?

A Grouting

B Draining of soil

C Confining of soil

D Compacting of soil

10 What is the name of the term in which, less shearingstrength of soil occurs in presence of excess of water?

A Grouting

B Draining of soil

C Confining of soil

D Compacting of soil

11 What will be the weight of clay (dry) in kg/m2?

A 1440 kg/m2

B 1480 kg/m2

C 1500 kg/m2

D 1600 kg/m2

12 What will be the weight of water in kg/m2?

A 900 kg/m2

B 950 kg/m2

C 1000 kg/m2

D 1200 kg/m2

13 What will be the maximum safe bearing capacity ofblock cotton soil in dry condition in Tonne/m2?

A 5 t/m2

B 10 t/m2

C 15 t/m2

D 25 t/m2

14 What will be the weight of cast-iron in kg/m2?

A 2590 kg/m2

B 7200 kg/m2

C 8590 kg/m2

D 9500 kg/m2

15 What will be the maximum safe bearing capacity ofsoft clay in tonne/m2?

A 5 t/m2

B 10 t/m2

C 15 t/m2

D 20 t/m2

16 What will be the movable load on the floor for residentialbuilding hospital, hotel, bed room etc?

A 200 kg/m2

B 400 kg/m2

C 500 kg/m2

D 750 kg/m2

17 What will the movable load on the floor for heavyworkshop printing press and factories?

A 400 kg/m2

B 500 kg/m2

C 750 kg/m2

D 1000 kg/m2

18 What is the weight of maximum safe bearing capacityof compact gravel and moorum in tonne/m2?

A 25 t/m2

B 45 t/m2

C 60 t/m2

D 75 t/m2

19 What will be the weight of lead in kg/m2?

A 2590 kg/m2

B 7200 kg/m2

C 8590 kg/m2

D 11360 kg/m2

20 What will be the weight of copper in kg/m2?

A 2590 kg/m2

B 7200 kg/m2

C 8590 kg/m2

D 11360 kg/m2

Foundation

21 What will be the remedy for the cause of unequalsettlement of the sub-soil?

A provide sufficient wide base

B Provide drive piles up the hard rock

C Foundation should rest on rigid strata

D Construct retaining wall to prevent the escape ofearth



40

22 What will be the remedy fer the cause of with drawl ofmoisture from sub-soil?

A Provide sufficient wide base

B Provide suitable underground drains

C Provide drive piles up to the hard rock

D Foundation should be sufficiently deep

23 What will be the remedy fer the unequal settlement ofthe masonry?

A Provide sufficient wide base

B Using mortar of proper strength

C Provide suitable underground drains

D Provide drive piles up to the hard rock



41


1 What is the name of the shallow foundation in whichthe total load of structure is transmitted to the base ofstructure and spread to the large area?

A Wall footing

B Slopped footing

C Spread footing

D Stepped footing

2 What will be the name of the footing for heavy loadedcolumn which require greater spread?

A Wall footing

B Slopped footing

C Stepped footing

D Spread footing

3 What will be the type of shallow foundation which madein concrete base of greater thickness at bottom andsmaller thickness at top?

A wall footing

B Slopped footing

C Spread footing

D Stepped footing

4 What will be the name of the shallow foundation that itconsisting of cone to base with ant step?

A Wall footing

B Stopped footing

C Spread footing

D Stepped footing

5 What is the name of foundation shown in figure?

6 Identify the name of foundation shown in figure?

A Strap foundation

B Mat or rat foundation

C Inverted arch foundation

D Steel grillage foundation

7 What is the name of the foundation shown in figure?

A Strap foundation





Shallow Foundation

A Strap foundation





42

8 Identify the name of foundation shown in figure?

A Strap foundation






43


1 What is the name of the foundation shown in figure?

A Pile foundation

B Pier foundation

C well foundation

D Under reamed foundation

2 Identify the name of the foundation shown in figure?

A Pile foundation

B Pier foundation

C stepped foundation


3 What is the name of the foundation shown the figure?

A Pile foundation

B Pier foundation



4 What is the name of foundation?

Draughtsman (Civil) Assignment for Exercise 1.4.27 - 1.4.29

Deep Foundation

A Pile foundation

B Pier foundation


D Under reamed pile foundation


44


1 What is the name of the foundation bolt which is in theshape of rectangular pyramid with round shank areformed with grooves, forming small projections?

A Eye bolt

B Rag bolt

C Lewis bolt

D Cotter bolt

2 What is the name of bolt which is rectangular with oneside taper?

A Eye bolt

B Rag bolt

C Lewis bolt

D Cotter bolt

3 Identify the name of the bolt shown in figure


Simple - Machine Foundation

A Eyebolt

B Rag bolt

C Lewis bolt

D Cotter bolt

4 What is the name of bolt shown in figure?

A Eye bolt

B Rag bolt

C Lewis bolt

D Cotter bolt

5 What is the name of bolt shown in figure?

A Eyebolt

B Rag bolt

C Lewis bolt

D Cotter bolt


45

6 Identify the name of bolt shown in figure?

A Eyebolt

B Lag bolt

C Lewis bolt

D Cotter bolt



46


1 What is the name of the shore in which consists ofwall plate needles cleats, struts, straining pieces andfolding edges?

A Racking shores

B Single flying shores

C Double Flying shores

D Dead or vertical shores

2 What is the name of the shore in which the distancebetween the parallel walls in 9m to 12m?

A Racking shores




3 What is the name of the shore in which an inclinedsupport provided to an un safe existing structureexternally?

A Racking shores




4 What is the name of the figure shown?

Draughtsman (Civil) Assignment for Exercise 1.5.31 & 1.5.32

Shoring

A Double Flying shores


C Racking shores


5 Identify the name of the shore shown in figure?

A Single flying shores

B Double flying shores

C Dead or vertical shores

D Racking shores

6 Identify the name of shore shown in figure?




D Racking shores


47

7 Identify the name of the shore shown in figure?




D Racking shores

Construction : Draughtsman Civil (NSQF Level-5) Assignment for Exercise 1.5.31 & 1.5.32


48


1 What is the name of the term in which the traversepieces are placed in the ledgers and are supported onthe wall at one end also right angles to the wall?

A Putlog

B Braces

C Transome

D Guard rail

2 What is the name of the term that the horizontalmembers are parallel to the wall?

A Ledgers

B Putlog

C Transome

D Guard rail

3 What is the name of the term that the putlogs bothends are supported on ledgers?

A Braces

B Bridle

C Transome

D Guard rail

4 What is the name of the term that the diagonal oncross pieces fixed on the stand?

A Braces

B Bridle

C Transome

D Guard rail

5 What is the name of the term that the piece which isused to bridge are opening in a wall and supports oneend of putlog at the opening?

A Braces

B Bridle

C Transome

D Ledgers

6 Identify the name of the scaffolding?

A Single scaffolding

B Needle scaffolding

C Mason's scaffolding

D Cantilever scaffolding of independent type

7 What is the name of the scaffolding shown in figure?




D Cantilever scaffolding


Scaffolding


49Construction : Draughtsman Civil (NSQF Level-5) Assignment for Exercise 1.5.32

8 What is name of the scaffolding shown in figure?




D Cantilever scaffolding


50


1 What is the name of the term for the method of underpinning that the existing wall is dived into suitablesections of width about 1.20m to 1.50m?

A Pit method

B Pile method

C Freezing method

D Vibro floating method

2 What is the name of the method for under pinning whichis rarely adopted because of more expensive and moretime is required for installation of pipes?

A Pit method

B Pile method

C Freezing method


3 What is the name of the term for the method of underpinning that the pipes are driven along both sides ofthe existing wall and this method is very useful for claysoil?

A Pit method

B Pile method

C Freezing method


4 What is the name of the term for the method of underpining which is useful for granular or sandy soil?

A Pit method

B Pile method

C Freezing method


5 What is the name of the name of the figure shown?

A Pit method

B Freezing method

C Vibro floating method

D Cement grounding method

Form work or shuttering

6 What is the name of the term for temporary boardingor shuttering or sheeting to hold concrete work for someperiod to allow the strengthening and hardening?

A Moulds

B Stripping

C Centering

D Form work

7 What is the name of the term used to indicate thelintels and cornice?

A Moulds

B Stripping

C Centering

D Form work

8 What the name of the term generally used for the worksuch as arches, domes etc?

A Moulds

B Stripping

C Centering

D Form work

9 What is the name of operation carried after form work?

A Moulds

B Stripping

C Centering

D Form work

Timbering of trenches

10 What is the name of term is used to indicate verticalmembers of timbering which directly resist pressurefrom the side of a trench?

A Wale

B Strut

C Bracing

D Sheeting

Draughtsman (Civil) Assignment for Exercise 1.5.33 & 1.5.34

Underpineimg


51

11 What is the name of the term is used to the piece oftimbering which transfers the load from the sheeting tothe strut?

A Wale

B Strut

C Bracing

D Sheeting

12 What is the name of the term that the diagonal pieceof timber used to give rigidity to the form work?

A Wale

B Strut

C Bracing

D Sheeting

13 What is the name of the form that the piece of timberwhich maintance a fixed distance between the walls?

A Wale

B Strut

C Bracing

D Sheeting

14 What is the name of method of timbering arrangementto the preventing the slip of earth when to excavationcarried out not to exceed 2 meter depth?

A Sheet piling

B stay bracing

C Box sheeting

D Vertical sheeting

15 What is the name of arrangement of preventing slip ofearth in foundation trenches as at the time of excavationcarried out on the loose soil does not exceed 4 meterdepth?

A Sheet puling

B Stay bracing

C Box sheeting

D Vertical sheeting

16 What is the name of method carried out for trenchesabout 10 meters depth in soft ground?

A Sheet paling

B Stay bracing

C Box sheeting

D Vertical sheeting

17 What is the name of arrangement carried for trenchesabout to meters in soft grounds stage by stage providingwith offset?

A Sheet poling

B Stay bracing

C Box sheeting

D vertical sheeting

Construction : Draughtsman Civil (NSQF Level-5) Assignment for Exercise 1.5.33 & 1.5.34


52


1 Name the method of damp proofing in which waterproofing materials are added during the process ofmixing materials?

A Integral treatment

B Surface treatment

C External walls treatment

D Internal wall treatment

2 What is the name of the dam proofing in Which jointsin brick work or stone work are pointed and is plasteredby paints oils, waxes and soap solution are used forthe treatment?

A Surface treatment

B Integral treatment

C External walls treatment

D Internal wall treatment

3 Identify name of construction shown in the figure?

A Treatment to basement

B Treatment to external walls

C Treatment to internal walls

D Treatment to expansion joint in flat roof

5 Identify the name of treatment shown in figure?


Damp proofing



C Treatment to slopping ground

D Treatment to expansion joint in flat roof

4 What is the name of the treatment shown in figure?



C Treatment to slopping ground

D Treatment to internal walls



B Treatment to eternal walls

C Treatment to internal walls

D Treatment to slopping ground


53




C Treatment to expansion joint for that roof

D Treatment to foundation against gravitation

8 Identify the name of method of construction fordampness shown in figure?

10 Identify the name of the material to make beautifulmarble like finish?

A Acoustic cement plaster

B Barium cement plaster

C Granite silicon plaster

D Asbestos cement plaster

11 What is the name of the material that is used x-rayrooms to protect the persons working?

A Acoustic plaster

B Barium plaster

C Gypsum plaster

D Granite silicon plaster

12 What is the name of the material used to quick settinghighly elastic and used for superior ware?

A Acoustic plaster

B Barium plaster

C Gypsum plaster


13 What is the name of the material used for fire resistinglight in weight, not affected by bacteria ornamentalplaster and applied easily and less wastage?

A Acoustic plaster

B Barium plaster

C Gypsum plaster


14 What is the name of the material used for maternalfinishing work?

A Acoustic plaster

B Barium plaster

C Martins cement plaster


Painting

15 What is the name of defect that formation of bubbleson painted surface due to water vapour?

A Fading

B Flanking

C Flashing

D Blistering

A Cavity wall construction

B Internal floor construction

C Treatment to external wall

D Expansion joint construction

Plastering

9 What is the name of the material to make the roomsound proof?

A Barium plaster

B Gypsum plaster

C Acoustic plaster




54

16 Identify the name of the defect that causes due toformation of dull patches and bad ventilation?

A Bloom

B Fading

C Flashing

D Grinning

17 What is the name of the defect that gradual of coloureffect of sun light?

A Bloom

B Fading

C Flashing

D Grinning

18 What is the name of the defeat for loose small portiondue to poor adhesion?

A Bloom

B Fading

C Flanking

D Flashing

19 What will happen when vertical and inclined surfaceare too thickness painted?

A Sagging

B Running

C Flanking

D Flashing

Varnishing

20 What is the name of the operation done by means ofhot weak glue size so that the pores on the surfaceare filled up will boiled linseed oil?

A Stopping

B Knotting

C Running

D Grinning



55


1 What is the name of the method to protect the buildingagainst termites to apply chemical treatment to thesoil at the time of construction?

A Soil treatment

B Structural barrier

C Pre construction treatment

D Post construction treatment

2 What is the name of the treatment to protect the buildingagainst the termites that the operation remove stumpsroots logs waste used etc?

A Soil treatment

B Structural barriers



3 What is the name of the treatment that to protect thebuilding against termites is a maintance treatment openearth around building and treat with chemicals?

A Soil treatment



D Pest construction treatment

4 What is the name of the treatment to protect the soilingagainst termites that the concrete layer of 5cm 7.5 cmthick or metal sheet (Copper or G1 sheets 0.8mm thick?

A Soil treatment





Termite proofing


56


Fire protection


1 What is the name of the structural member in fireprotection that wire glass preferred for windows - steelrolling shutters are prefer for doors and ways.

A Wall openings

B Floors and columns

C Wall and columns

D Beni ding fire escape element

2 What is the name of the structural member that shouldbe mode of fire - resisting material as thing act ashorizontal barriers to spread of heat and fire in verticaldirection

A Wall openings

B Floors and roofs

C Wall and columns

D Building fire escape element

3 What is the name of the structural members theyshould be constructed out of fire - resistant materialwell separated from rent of building.

A Wall openings

B Flours and roots

C Walls and columns

D Building fine escape element

4 What is the name of the thermal Insulation structuralthat by providing insulation glass or double glass withsufficient air space.

A Thermal Insulation roofs

B Heat Insulation shading

C Reduction of heat Transome

D Thermal insulation of exposed walls

5 What is the name of the raising the parapet walls whichcan help when the altitude angle of sun is low-

A Thermal Insulation root

B Heat insulation by shading

C Reduction of heat trans miss walls


6 What is the name of the thermal insulation structurethat the thickness of wall increased cavity wallconstruction may be adopted for external members.

A Thermal insulation roots


C Reduction of heat trans mission


7 What is the name of the thermal insulation structurethat heat insulating material applied externally orinternally on the roofs?

A Thermal insulation roofs


C Reduction of heat trans mission

D Thermal insulation of exposed walls.


57


Arches


1 Identify the name of the part labelled as letter ' x' in thefigure.

3 Identify the name of part labelled 'X' in the figure

A Haunch

B Extrados

C Voussoirs

D Inner curve of an arch

2 Identify the name of the part labelled as 'X' in the figure.

A Soffit

B Extrados

C Voussoirs


A Soffit

B Extrados

C Voussoirs

D Outer curve of an arch

4 What is the name of the part labelled as 'X' in the figure

A Soffit

B Extrados

C Voussoirs



58

5 Identify the term for the inner curve of an arch.

A Soffit

B Crown

C Intrados

D Voussoirs

6 What is the name of the term for row of arches.

A Arcade

B Abutment

C Extrados

D Intrados

7 What is the name of the term for outer curve of anarch.

A Crown

B Intrados

C Extrados

D Spandril

8 What is the name of the component of an arch labelledas 'X' shown in figure

A Key

B Crown

C Spandril

D Skew back

10 What is the name of the component of an arch labelledas 'X' shown in figure.

A Key

B Crown

C Spandril

D Skew back

9 What is the name of the component of an arch labelledas 'X' shown in figure.

A Key

B Crown

C Spandril

D Skew back

11 What is the name of the component of an arch labelledas 'X; shown in figure.

A Key

B Crown

C Spandril

D Skew back

12 What is the name of the term for an inter mediatesupport of arch.

A Key

B Pier

C Span.

D Crown



59

17 What is the name of the component labelled as ' X'shown in the figure.

13 What is the name for the term of the component for thelower half of an arch.

A Key

B Pier

C Crown

D Haunch.

14 What is the name for the perpendicular distancebetween the intrados and extrados

A Key

B Pier

C Rise

D Depth

15 What is the name of the component labelled as 'X' inthe figure shown.

A Pier

B Springers

C Springing line

D Springing point

Arches according to shape

18 What is the name of the arch in which the maximumspan up to 1 to 5 m and used for light loading.

A Flat arch

B Semi circular arch

C Segmental arch

D Bulls eye arch

19 Identify the name of arch in which centre of arch isbelow springing line and the thrust transferred to theabutment in a inclined direction.

A Flat arch

B Semi circular arch

C Bulls eye arch

D Segmental arch

20 What is the name of arch which is constructed over awooden joist or flat arch from carrying load

A Relieving arch

B Segmental arch

C Horse shoe arch

D Semi-circular arch

21 What is the name of arch in which in the depth at crownis more than that at the springing line, and have fourcentres

A Stilted arch

B Venetian arch

C Reliving arch

D Pointed arch

A Pier

B Springers

C Springing line

D Springing point

A Pier

B Springers

C Springing line

D Springing point

16 What is the name of the component labelled as 'X'shown in the figure



60

22 What is the name of the arch which is a pointed archof four centres

A Drop arch

B Ogee arch

C Tudor arch

D Horse shoe arch

23 What is the name of arch shown in figure ?

A Flat arch

B Reliving arch

C Segmental arch

D Semi - elliptical arch

24 What is the name of the arch shown in figure?

A Flat arch

B Reliving arch

C Segmental arch


26 What is the name of arch shown in figure

A Drop arch

B Bull's eye arch

C Venetian arch

D Horse shoe arch


A Flat arch

B Reliving arch

C Segmental arch


25 Identify the name of the arch shown in figure?

A Drop arch

B Bull's eye arch

C Venetian arch

D Horse shoe arch


A Ogee arch

B Tudor arch

C Pointed arch

D Florentine arch



61

Arches according to material construction/movementship

29 What is the name of type arch which constructed fromwedged shaped units and by ashlar masonry

A Stone arch

B Brick arch

C Coroneted arch

D Gauged arch

30 What is the name of arch constructed by ordinary brick/propose made brick / not suitable for exposed brickwork.

A Stone arch

B Brick arch

C Concrete arch

D Gauged arch

31 What is the name of arch constructed by using bricksof rectangular shape and mortar Joints are wider atextrados that at the introdos.

A Brick arch

B Gauged arch

C Rough arch

D Axed or rough cut arch

32 What is the name of arch constructed by casting andare suitable for long span .

A Brick arch

B Stone arch

C Gauged arch

D Concrete arch

Centering of arches.

33 Identify the name of term labelled as 'X' shown in figure.

A Strut

B Braces

C Bearers

D Laggings

34 What is the name of the term labelled as 'X' shown infigure.

A Strut

B Braces

C Bearers

D Laggings

35 Identify the name of part labelled as ' X' shown in thefigure

A Strut

B Braces

C Bearers

D Laggings

36 What is the name of the part labelled as 'X' shown inthe figure.

A Strut

B Braces

C Bearers

D Laggings



62

Draughtsman (Civil) Assignment for Exercise 1.7.39 to 1.7.40

Laitels


1 What is the name of the lintel in which the width of thelintel should be equal to the openings and the depth oflintel should be 1/12 to 1/8 of the span.

A Brick lintel

B Wood lintel

C Stone lintel

D Steel lintel

2 What is the name of the lintel in which it posses lowtensile resistance and it is difficult to obtain good stoneof required depth.

A Brick lintel

B Wood lintel

C Stone lintel

D Steel lintel

3 What is the name of lintel which is fire proof - durable -strong - economical easy to construct and no relievingarches are required

A Brick lintel

B Steel lintel

C Wood lintel

D Reinforced cement concrete

4 What is the name of lintel shown in figure.

A Brick lintel

B Wood lintel

C Stone lintel

D Reinforced cement concrete lintel

6 What is the name of the lintel shown in figure

A Brick lintel

B Wood lintel

C Stone lintel


7 Identify the name of lintel shown in figure

A Brick lintel

B Wood lintel

C Stone lintel


5 Identify name of lintel shown in figure.

A Brick lintel

B Wood lintel

C Stone lintel


8 What is the name of lintel shown in figure.

A Brick lintel

B Wood lintel

C Stone lintel

D Reinforced brick lintel


draughtsman civil...revised curriculum for draughtsman civil 1 st year (volume i of ii) assignment...

Documents