drill, ream... portfolio page
TRANSCRIPT
![Page 1: Drill, Ream... Portfolio Page](https://reader036.vdocument.in/reader036/viewer/2022062302/589cee881a28abcc258b49d3/html5/thumbnails/1.jpg)
James ManningDrill, Ream, Counterbore,
Countersink, and Tap
Requirements:1. 1/4 “ Reamed hole2. Counterbore a clearance hole for a
3/8-16 SHCS3. Countersink a clearance hole for a ¼-
20 FHMS4. Tap a ¼-20 x ½” deep thread,
Clearance drill back side to ½” depth5. Chamfer a 45 degree angle on the
bottom
Chamfered edges Tapped, Deep Threaded and machined a half inch back into block
Counterbore,Drilled & tapped
Countersink,Drilled & Reamed Materials Used:
• 3” x 3” x 1” steel block• Manual Mill• Manual Lathe