drilling – punching – cutting – deburring · single-acting page 43 - 48 hydraulic punching...
TRANSCRIPT
Index Drilling – Punching – Cutting – Deburring
Rotabest® Metal Core Drilling MachinesPage 4 - 25
Rotabest® Metal Core Drilling MachinesPage 4 - 25
Rotabest® Metal Core Drilling MachinesPage 4 - 25
Rotabest® Metal Core Drilling MachinesPage 4 - 25
Metal Core Drilling – TappingPage 28
Tool Holders/AdaptorsPage 26 / 41
Cutters HSS-CoPage 34 - 37
TCT Cutters-Weldon ShankPage 38 - 39
TCT Cutters ALPage 40
Adaptors/ ExtensionsPage 42
Hydraulic Punching Units single-actingPage 43 - 48
Hydraulic Punching Unitsdouble-actingPage 49
Hydraulic PumpsPage 47- 49
Deburring Devices Page 53 - 59
Bevel Milling MachinePage 60 - 61
Deburring DevicesPage 62 - 65
Deburring DevicesPage 66 - 69
Rotaspeed® Cutting Saw RS 230APage 70 - 73
355 (14“) Super Dry Cut SawPage 74
16“ Super Dry Cut SawPage 75
HSS-Bi-Metal Hole Saws/SetsPage 76 - 80
Bevel Milling Machine TCT-Hole SawsPage 81 - 85
TCT-Hole Saws MBS + MBS ProPage 86 - 89
Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92
Astroflex® Sabre Saw BladesSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95
Battery-packedcompact hydraulic punchPage 96 - 97
Puncher and Puncher SetsPage 98 - 103
Special PuncherPage 104 -
ALFRA – separates the tools from the toys 3
RotabestMetal Core Drilling MachinesPage 4 - 25
RotabestMetal Core Drilling MachinesPage 4 - 25
RotabestMetal Core Drilling MachinesPage 4 - 25
Rotabest®Rotabest®RotabestMetal Core Drilling MachinesPage 4 - 25
Metal Core Drilling – TappingPage 28
Tool Holders/AdaptorsPage 26 / 41
Cutters HSS-CoPage 34 - 37Cutters HSS-Co
Rotabest®Rotabest®RotabestMetal Core Drilling Machines
Rotabest®Rotabest®RotabestMetal Core Drilling Machines
Rotabest®Rotabest®RotabestMetal Core Drilling Machines
Metal Core Drilling Machines
TCT Cutters-Weldon ShankPage 38 - 39
TCT Cutters ALPage 40
Adaptors/ ExtensionsPage 42
Hydraulic Punching Units single-actingPage 43 - 48
Hydraulic Punching Unitsdouble-actingPage 49
Hydraulic PumpsPage 47- 49
TCT Cutters AL
Hydraulic Punching Units
Hydraulic Punching Units
Adaptors/ Extensions
Hydraulic PumpsPage 47- 49
Rotaspeed®Rotaspeed®RotaspeedCutting Saw RS 230APage 70 - 73
355 (14“) Super Dry Cut SawPage 74
16“ Super Dry Cut SawPage 75
HSS-Bi-Metal Hole Saws/SetsPage 76 - 80
Rotaspeed®Rotaspeed®Rotaspeed
355 (14“) Super Dry Cut Saw
Dry Cut Saw
TCT-Hole SawsPage 81 - 85
TCT-Hole Saws MBS + MBS ProPage 86 - 89
Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92
AstroflexSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95
Battery-packedcompact hydraulic punchPage 96 - 97
Page 98 - 103
Special PuncherPage 104 -
Multi-Step Drills
Astroflex® Astroflex® Astroflex Sabre Saw BladesSabre Saw Blades
Puncher and Puncher SetsPage 98 - 103Puncher and Puncher SetsPuncher and Puncher SetsPage 98 - 103
Special Puncher
Battery-packedcompact hydraulic punch
TCT-Hole Saws MBS + MBS Pro
ALFRA – separates the tools from the toys 53
ALFRA Bevel Milling- and Deburring Devices – OverviewMade in Germany by ALFRA
Type KFH 150 KFH 250 SKF 63-15 KFT 250 KFT 500 KFK
Prod.-No. 25100 25130 25010 25110 25140 25200
Prismsupport L = 6“ / W = 13/16“/1 9/16“ L = 150 mm / W = 20/40 mm
L = 10“ / W = 3“L = 250 mm / W = 70 mm
support guide with rollers9 7/16” x 3 1/8” / 8 11/16” x 2 15/16”
240 x 80 mm / 220 x 75 mm
L = 250 mm/W = 40 mmL = 10“/W = 1-19/16“
L = 500 mm/W = 70 mmL = 20“/W = 2-3/4“
–
EndMillØ Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ indexable inserts Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ Indexable insert holder
Max.BevelWidth3/64“ - 13/64“, depending on material,
with fine adjustment9/16“ depending on material 19/32“ max.
3/64“ - 9/32“ depending on material,with fine adjustment
1/16“ - 9/16“45°: steel 0 – 13/64“, alu 0 – 5/16“ 30°: steel 0 – 5/32“, alu 0 – 15/64“
BevelAngle 45°
continuously 30° - 45° - 30° pivotingleft and right for 60° welding bevels.As well for radii r= 3.0 , 4.0 and 5.0 by means
of radius solid carbide end mills.
15 - 20 - 30 - 45 - 60° adjustable 45° 45°
45°(optional 30°)
Radius R = 2.5
HighPerformanceMotor ■ ■ ■ ■ ■ ■
MotorCapacity 1050 Watt 1800 Watt 1100 Watt 1050 Watt 1800 Watt 1300 Watt
SteplessSpeedControl 8000 up to 25000 rpm 2500 up to 23500 rpm 2870 rpm 8000 up to 25000 rpm 2500 up to 23500 rpm 6000 up to 10.000 rpm with soft start
FullWaveElectronics ■ ■■
with thermal and overload protection ■ ■■
with thermal and overload protection
ColletØ 1-45/64“ – 43 mm 2-31/64“ – 63 mm 1-45/64“ – 43 mm 2-31/64“ – 63 mm –
Voltage 110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V - 50 Hzor 110 V - 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 Hz or 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
Weight 7 lbs./3.5 kg 23 lbs./12.8 kg 46.2 lbs./21 kg 11 lbs./5.0 kg 39 lbs./18 kg 9.2 lbs./4.2 kg
Dimensions(LxWxH) 13.39 3/64 “ x 5.91“ x 4.33“ 18.9“ x 12.4“ x 5.71“ 17.32“ x 7.87“ x 11.02“ 14.17“ x 9.84“ x 4.33“ 17.72“ x 19.69“ x 6.3“ L = 17.72“
CableLength 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m
■ 110 Volt – Prod.-No. 25191.110■ 230 Volt – Prod.-No. 25191 ■ 110 Volt – Prod.-No. 25192.110
■ 230 Volt – Prod.-No. 25192
ALFRA foot switch with female connector (230 V).Running time reduction and motor saving operation.
Function: Foot switch pressed – female connector energized. Foot switch released – Voltage disconnected. Prod.-No. 25116
ALFRA – separates the tools from the toys54
ALFRA Bevel Milling- and Deburring Devices – OverviewMade in Germany by ALFRA
Type KFH 150 KFH 250 SKF 63-15 KFT 250 KFT 500 KFK
Prod.-No. 25100 25130 25010 25110 25140 25200
Prismsupport L = 6“ / W = 13/16“/1 9/16“ L = 150 mm / W = 20/40 mm
L = 10“ / W = 3“L = 250 mm / W = 70 mm
support guide with rollers9 7/16” x 3 1/8” / 8 11/16” x 2 15/16”
240 x 80 mm / 220 x 75 mm
L = 250 mm/W = 40 mmL = 10“/W = 1-19/16“
L = 500 mm/W = 70 mmL = 20“/W = 2-3/4“
–
EndMillØ Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ indexable inserts Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ Indexable insert holder
Max.BevelWidth3/64“ - 13/64“, depending on material,
with fine adjustment9/16“ depending on material 19/32“ max.
3/64“ - 9/32“ depending on material,with fine adjustment
1/16“ - 9/16“45°: steel 0 – 13/64“, alu 0 – 5/16“ 30°: steel 0 – 5/32“, alu 0 – 15/64“
BevelAngle 45°
continuously 30° - 45° - 30° pivotingleft and right for 60° welding bevels.As well for radii r= 3.0 , 4.0 and 5.0 by means
of radius solid carbide end mills.
15 - 20 - 30 - 45 - 60° adjustable 45° 45°
45°(optional 30°)
Radius R = 2.5
HighPerformanceMotor ■ ■ ■ ■ ■ ■
MotorCapacity 1050 Watt 1800 Watt 1100 Watt 1050 Watt 1800 Watt 1300 Watt
SteplessSpeedControl 8000 up to 25000 rpm 2500 up to 23500 rpm 2870 rpm 8000 up to 25000 rpm 2500 up to 23500 rpm 6000 up to 10.000 rpm with soft start
FullWaveElectronics ■ ■■
with thermal and overload protection ■ ■■
with thermal and overload protection
ColletØ 1-45/64“ – 43 mm 2-31/64“ – 63 mm 1-45/64“ – 43 mm 2-31/64“ – 63 mm –
Voltage 110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V - 50 Hzor 110 V - 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 Hz or 60 Hz
110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz
Weight 7 lbs./3.5 kg 23 lbs./12.8 kg 46.2 lbs./21 kg 11 lbs./5.0 kg 39 lbs./18 kg 9.2 lbs./4.2 kg
Dimensions(LxWxH) 13.39 3/64 “ x 5.91“ x 4.33“ 18.9“ x 12.4“ x 5.71“ 17.32“ x 7.87“ x 11.02“ 14.17“ x 9.84“ x 4.33“ 17.72“ x 19.69“ x 6.3“ L = 17.72“
CableLength 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m
■ 110 Volt – Prod.-No. 25191.110■ 230 Volt – Prod.-No. 25191 ■ 110 Volt – Prod.-No. 25192.110
■ 230 Volt – Prod.-No. 25192
ALFRA foot switch with female connector (230 V).Running time reduction and motor saving operation.
Function: Foot switch pressed – female connector energized. Foot switch released – Voltage disconnected. Prod.-No. 25116
ALFRA – separates the tools from the toys 55
KFH 150GuideHandle
GuidanceRailsofhigh-tensilespecialsteel
High-performancemotorwithdoublebearingmillingspindle
ClampingLeverforquickadjustment
FineAdjustmentofMillingDepth/BevelWidth
End Mills see page 70/71
ALFRA Deburring Devices
ALFRA – separates the tools from the toys56
ALFRA Deburring Devices – KFH 150Made in Germany by ALFRA
Withthemachinetowardstheworkpiece,whereamachineddeburringistootime-consuming.
Manuallyoperateddeviceforthedeburring(45°)oflargerwork-pieces,profiles,girders,sheetmetals,with90°support.
■ Manuallyoperated,for45°bevels.
■ Optimalguidingandsafeoperation.
■ ForcustomarysolidcarbideendmillsØ5/16“–8mm.
FullWaveElectronics
Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
TechnicalData:GuideRail45°: L=5-29/32“–150mm W=13/16“/1-37/64“–20/40mmEndMill: SolidCarbideEndMillsacc.toDIN,Ø5/16“Max.BevelWidth: 3/64“-13/64“,dependingonmaterial withfineadjustmentHighPerformanceMotor: withFullWaveElectronicsVoltage: 110Voltor230VoltMotorCapacity: 1050WContinuouslyadjustableSpeed: 8000upto25000rpmCollar-Ø: 1-45/64“–43mmWeight: 7lbs.–3.5kg
Contentsinclude:• ALFRADeburringDeviceKFH150• 1SetGuideRails• 1ColletØ5/16“–8mmandClampingNut• 1OperationManual
Prod.-No.Deburring Device KFH 150 110 Volt 25100.110
Deburring Device KFH 150 230 Volt 25100
Deburring Device KFH 150 (without motor) 25109
Accessories Spare-Guide Rails 25101Madeofhigh-tensilespecialsteelW=40/15mmxL=150mm,1Set=2pieces
Special AccessoriesGuide Rails 25102madeofhigh-gradeplasticsW=40/15mmxL=150mm,1Set=2pieces
ALFRA – separates the tools from the toys 57
KFH 250Ergonomic
GuideHandles
GuidanceRailsmadeofhigh-tensilespecialsteel
Clampingleverforquickadjustment
FineAdjustmentofMill-ingDepth/BevelWidth
30°–45°–30°swivelling
Guidancewheelsfacilitatesthefeed
End Mills see page 70/71
ALFRA Deburring Devices
ALFRA – separates the tools from the toys58
ALFRA Deburring Devices – KFH 250Made in Germany by ALFRA
Manuallyoperatedmodel,especiallydevelopedfortheprocessingofbevels(visualbevels)andpreparationofweldonlargeright-angledworkpieces.■ Anindispensablehelperinengineeringandsteelconstruction.■Widespeedrangeofvariousmaterials.■ Individualadjustmentofmillingdepth.■ Easyhandlingandguidingthroughaluminiumhead.
Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
High-performancemotorwithdoublebearingmillingspindle
Fine adjustment of milling depth/ bevel width
TechnicalData:GuideRail: L=10“–250mm W=2-49/64“–70mmEndMill-Ø: 15/32“–12mmDIN6527Max.BevelWidth: 9/16“–14mm(dependingonmaterial)Edgeangles: continuouslytraversableby30–45°–30° rightandleft.Alsoforradiir=3.0,4.0,5.0bymeansofRadius-
SolidCarbideEndMillsCapacity: 1800W(TheQualityMotorfordifficult deburringtasks)ContinuouslyadjustableSpeed: 6000upto24000rpmFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.Collar-Ø: 2-31/64“–63mmVoltage: 110Voltor230VoltWeight: 23lbs./12.8kg
Contentsinclude:• ALFRADeburringDeviceKFH250,withmillingdepthfineadjustment• 1SetGuideRailswith2SupportRollers• 1ColletØ15/32“–12mmandClampingNut• 1SetOperatingTools• 1OperationManual
Prod.-No.Deburring Device KFH 250 110 Volt 25130.110
Deburring Device KFH 250 230 Volt 25130
Deburring Device KFH 250 (without motor) 25131
GuideRailsandSupportRollersmadeofwear-resistantplasticuponrequest.
Cost reduction:Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
bearing milling
Fine adjustment of milling depth/ bevel width
ALFRA – separates the tools from the toys 59
ALFRA Bevel Milling Machine
SKF 63-15
ALFRA – separates the tools from the toys60
ALFRA Bevel Milling Machine – SKF 63-15Made in Germany by ALFRA • For bevel width of max. 15 mm and with a continuously variable angle adjustment 15° - 20° - 30° 45° - 60°
Integrated OFF-switch
2 milling disks and 6 pcs. high speed indexable inserts
■ TheALFRABevelMillingMachinewasespeciallydevelopedforthepreparationofweldsandforthebevellingofmetallicmaterials.
■ Lowweight,enablingtheuniversaluseontheworkpiece.
■ Machineisdesignedforone-handoperationsuitableforthemillingofsteel,chromenickelsteel,castironandnon-ferrousheavymetals.Themachineissetattheedgeoftheworkpieceandmoveablewithslightpressure
(manualfeed).
■ Theconstructionofthemillingdisk,undertheuseofcommer-ciallyavailablecarbidemillingplatesandarotationspeedof2870rpm,guaranteesasteadybevelmillingwithoutvibration.
■ Theguideroller´srailsaremadeofhardenedsteelandguaran-teeconvincingfeedvalues.
■ Easyandsafeoperationbyelectronicswitch-offcontrolintheeventofoverstressingandreclosurepreventingdevice.
■ OFF-buttonintegratedinrighthandle(Illustration).
■ AlsosuitableforthebevellingofpipesfromØ7“–160mmuptoØ16“–390mmbymeansofaspecialaccessory.
■ LargerdiametersuptoØ40“-60“-80“/1000-1500-2000mmuponrequest.
TechnicalData:Voltage: 110Voltor230VoltCapacity: 1100WattSpeed: 2870rpm WiththermalandoverloadprotectionBevelwidth: 19/32–15mmmax.Bevelangle: 15-20-30-45-60°continuouslyadjustableWeight: 46.2lbs.–21kgDimension(LxWxH) 173/8”x713/16”11”–440x200x280mm
Contentsinclude:• BevelMillingMachineSKF63-15• 1setoftools• operationmanual• transportcase
Prod.-No.Bevel Milling Machine SKF 63-15, 110 V, cpl. 110 Volt 25010.110
Bevel Milling Machine SKF 63-15, 230 V, cpl. 230 Volt 25010
Special accessories:Pipe insert for the processing of external bezels on pipes 25014
fromØ6.3“-15.35“(160-390mm)Largerdiametersupto2000mmuponrequest.
Spare Parts:Spare milling head for St.37 Spun 12008 cpl. 25011
Consistingof:2millingdisksand6pcs.highspeedindexableinsertseach
Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25013Universalforsteelandstainlesssteel,Clearanceangle11°
Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25010.15036Bforsteel<850N/mm2;stainlesssteel<>900N/mm2,Clearanceangle20°
Carbide Milling plates, high gloss polished 25010.15036CforaluminiumandNE-metals,Clearanceangle11°
Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25010.15036Eforsteel<1400N/mm2;stainlesssteel<>900N/mm2,Clearanceangle11°
Milling disk assembly device 25019Foraneasyassemblyoftheindexableinserts.
ALFRA – separates the tools from the toys 61
KFT 250
GuidanceRailsmadeofhigh-tensile
specialsteel
High-Performancemotorwithdouble
bearingmillingspindleClampingLeverforquick
adjustmentFineAdjustmentofMill-ingDepth/BevelWidth
ChipCollector
Rubberfeetforsmoothrunningandstability
End Mills see page 70/71
ALFRA Deburring Devices
ALFRA – separates the tools from the toys62
ALFRA Deburring Devices – KFT 250 (Stationary Model)Made in Germany by ALFRA
SimpleandinexpensiveDeburringDeviceforlighttomediumoperationdemands.
FortherealisationofuniqueouterbevelsurfaceswithSolidCar-bideEndMillsDIN6527whenhobbing,withoutsecondaryburr.
Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
FullWaveElectronics
Position I: Material thicknesses as from 4.5 mm
Position II: Material thicknesses as from 1.0 mm
Foot Switch (optional)
TechnicalData:Deburringrange: Bevelangle45°PrismSupportPositionI: MaterialThicknessesfrom11/64“–4,5mmPositionII: MaterialThicknessesfrom3/64“–1mmPrismSupport: L=10“–250mmGuideRails: W=1-37/64“–40mmMax.BevelWidth: 9/32“–7mm,dependingonmaterial. WhenusingcorrespondingEndMills,speedand
correspondingnumberofcuttingpasses,aswellsuitableforstainlesssteel(brush edgeswithcuttingoil).
Weight: 11lbs.–5.0kgHighPerformanceMotor: 1.050WwithtriplebearingDoublesupportedmillingspindleSpindlebearingwithhighspeedlubricationWheelflangeNorm-Ø: 1-45/64“–43mmContinuouslyadjustableSpeed: 8000-25000rpm
Voltage: 110Voltor230VoltFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.
Contentsinclude:• DeburringDeviceKFT250,withfineadjustmentofthemillingdepth• 1SetGuideRails• 1ColletØ5/16“–8mmandClampingNut• 1ChipCollector• 1SetOperatingTools• 1OperationManual
Prod.-No.Deburring Device KFT 250 Stationary Model 110 Volt 25110.110
Deburring Device KFT 250 Stationary Model 230 Volt 25110
Deburring Device KFT 250 Stationary Model (without motor) 25111
Accessories:ALFRA Foot Switch with female connector 230 Volt 25116
Cost reduction:Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
Position I: Material thicknesses as from 4.5 mmMaterial thicknesses as from 4.5 mm
Foot Switch (optional)Foot Switch (optional)
ALFRA – separates the tools from the toys 63
KFT 500GuidanceRails
madeofhigh-tensilespecialsteel
High-Performancemotorwithdouble
bearingmillingspindleClampingLeverforquickadjustment
FineAdjustmentofMill-ingDepth/BevelWidth
ChipCollector RubberFeetforsmoothrunningandhighstabil-
ity
End Mills see page 70/71
ALFRA Deburring Devices
ALFRA – separates the tools from the toys64
ALFRA Deburring Devices – KFT 500 (Stationary Model)Made in Germany by ALFRA
For medium and larger workpieces. Max. bevel width 9/16“ForuniqueouterbevelsurfacesusingSolidCarbideEndMillsDIN6527whenhobbing,withoutsecondaryburr.
Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.
Position I:Material thicknesses 6 - 14 mm
Position II: Material thicknesses as from 1.5 mm
Foot Switch (optional)
Exact Deburring by means of self-generating milling cutter
Fine Adjustment of Milling Depth/Bevel Width
TechnicalData:Deburringrange: Bevelangle45°PrismSupportPositionI: MaterialThicknesses15/64“-9/16“–6-14mmPositionII: MaterialThicknessesfrom1/16“–1.5mmGuideRail: L=1911/16“–500mm W=23/4“–70mmMax.BevelWidth: 9/16“–14mm,dependingonmaterial.
WhenusingcorrespondingEndMills,speedandcorrespondingnumberofcuttingpasses,aswellsuitableforstainlesssteel(brush edgeswithcuttingoil).
AlsoforradiiR=3.0,4.0,5.0bymeansofSolidCarbideEndMil
HighPerformanceMotor: 1.800WwithtriplebearingDoublesupportedmillingspindleSpindlebearingwithhighspeedlubricationWheelflange-Ø: 2-31/64“–63mmContinuouslyadjustableSpeed: 6000upto24000rpmVoltage: 110Voltor230VoltFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.Weight: 39lbs./18kg
Contentsinclude:• DeburringDeviceKFT500,withfineadjustmentofthemillingdepth• 1SetGuideRails• 1Collet15/32“–12mmØandClampingNutDIN6499• 1ChipCollector• 1SetOperatingTools• 1OperationManual
Prod.-No.Deburring Device KFT 500 Stationary Model 110 Volt 25140.110
Deburring Device KFT 500 Stationary Model 230 Volt 25140
Deburring Device KFT 500 Stationary Model (without motor) 25141
ALFRA Foot Switch with female connector 230 Volt 25116forrunningtimereductionandmotorsparingoperation.Function: FootSwitchpressed:Connectorenergized. FootSwitchreleased:Connectorcutoff.
Position I:Material thicknesses 6 - 14 mmMaterial thicknesses 6 - 14 mm
ALFRA – separates the tools from the toys 65
KFKErgonomichandlewith
ON/OFF-switch
Adjustmentofbevelwidth
Withthermalandoverloadprotection
HighPerformancemotorwithsoftstart
Prod.-No. 25202 Prod.-No. 25203Prod.-No. 25202 Prod.-No. 25203Prod.-No. 25203Prod.-No. 25202
KFKALFRA Deburring Devices
ALFRA – separates the tools from the toys66
ALFRA Deburring Devices – KFKMade in Germany by ALFRA
Forthedeburringofouterandinneroutlines,smallestboreholediameter25/32“–20mm.
Especiallydevelopedtoproducecleanvisibleedgesandtopreparewelds.
■Tool-lessadjustmentofbevelheight.■ Handyandpowerful.■ Forconstructionsteels,stainlesssteels,aluminiumandother
material.■ Triplecuttinginsertholder.■ BevelAngle45°(30°optionally)■ RadiiR=2.5
Initial Bore as from Ø 25/32“ ; 20 mm
TechnicalData:BevelAngle: 45°(optional30°)BevelWidth45°: Steel0-3/16“–0-5mm400N/mm2continuously Alu0-5/16“–0-8mm250N/mm2continuouslyBevelWidth30°: Steel0-5/32“–0-4mm400N/mm2continuously Alu0-15/64“–0-6mm250N/mm2continuouslyVoltage: 110Vor230VoltCapacity: 1300WContinuouslyadjustableSpeed: 6000upto10.000rpmwithsoftstart WiththermalandoverloadprotectionFeed: manually Weight: 9.2lbs.–4.2kg
Contentsinclude:• KFKDeburringandBevellingDevice • 1pc.MillingTool45°withindexableinserts• 1ToolSet• TransportCase• OperationManual
Prod.-No.Deburring Device KFK – with 45° Spare-Insert Holder 110 Volt 25200.110
Deburring Device KFK – with 45° Spare-Insert Holder 230 Volt 25200
Deburring Device KFK – with 30° Spare-Insert Holder 110 Volt 25201.110
Deburring Device KFK – with 30° Spare-Insert Holder 230 Volt 25201
Accessories:45° Spare-Insert Holder/Radius 2.5 mm (without indexable inserts) 25202
30° Spare-Insert Holder (without indexable inserts) 25203
Guiding Stop for straight outer edges, adjustable 25207
Tools:Indexable inserts ISO TOHX/TOHT 13,47 x 3 coated 25206 Radius-Inserts 2.5 mm 25205
Triple cutting■ Bevel Angle 45° (30° optionally)■ Radii R = 2.5
ALFRA – separates the tools from the toys 67
ALFRA – Carbide Deburring End Mill for KFH 150 – KFT 250Made in USA
ALFRA-Solid Carbide Deburring End MillThese Solid Carbide End Mills were especially developed for perfect deburring tasks.The chips will be moved off the motor spindle in the chip collector or in the chip channels.
■ Solid Carbide End Mill similar to DIN 6527■ Precision type shank Ø 5/16“ – 8 mm■ Total length 2-3/8“ – 60 mm
Prod.-No.Carbide End Mills Ø 5/16“ – 8 mm, 4 cutting edges, 25150End Mill with larger chip spaces,suitable for wide bevels (up to 9/32“ – 7 mm) in soft materials i.e.aluminium–brass–plastics-wood.Universal use in steel, stainless steel up to a bevel width of 13/64“ – 5 mmcoated
Carbide End Mills Ø 5/16“ – 8 mm, 5 cutting edges, 25151suitable for wide bevels (up to 13/64“ – 5 mm).Universal use in steel, stainless steel, non-ferrous metals, plasticscoated
Carbide End Mills Ø 5/16“ – 8 mm, 8 cutting edges, 25152for non-ferrous metals (copper, brass, bronze)as well as short-chipping aluminium alloys.coated
Carbide End Mills Ø 5/16“ – 8 mm, 14 cutting edges, 25153for steel, cast iron and and small bevels in short-chipping non-ferrous metals, as well as for hardened materialscoated
Carbide End Mills Ø 5/16“ – 8 mm, 4 cutting edges, 25154rough toothing, fine knurl. Universal End Mill, for steel, stainless steel whenreducing speed, also for smaller bevel millscoated
Radius Mills R 1.5 – 2.0 – 2.5 for KFH 150 and KFT 250 on request
End Mills for special tasks on request.
Prod.-No.End Mill-Set in plastic packing 25159Content: 5 Carbide End MillsProd.-No. 25150, 25151, 25152, 25153, 25154Ideal for initial equipment.
Prod.-No. 25150
Prod.-No. 25151
Prod.-No. 25152
Prod.-No. 25153
Prod.-No. 25154
Prod.-No. 25159Prod.-No. 25159
MadeintheUSA
ALFRA – separates the tools from the toys68
ALFRA – Carbide Deburring End Mill for KFH 250 – KFT 500Made in USA
■ Solid Carbide End Mill Precision Type ■ Shank-Ø 15/32“ – 12 mm■ Total length 3-5/32“ – 80 mm
Prod.-No.Carbide End Mill Ø 15/32“ – 12 mm, 3 cutting edges, 25160for long-chipping materials aluminium/copper/plasticsBevel Width up to 9/16“ – 14 mmcoated
Carbide End Mill Ø 15/32“ – 12 mm, 4 cutting edges, 25161for steel/cast iron/stainless steelsBevel Width up to 5/16“ – 8 mmcoated
Carbide End Mill Ø 15/32“ – 12 mm, 6 cutting edges, 25162Universal End Mill for steel/cast iron/stainless steelsBevel Width up to 9/32“ – 7 mmcoated
Carbide End Mill Ø 15/32“ – 12 mm, 4 cutting edges 25163rough toothing for steel / cast iron / stainless steels.For the preparation of weld.Bevel Width up to 9/16“ – 14 mm (with increasing milling depth)coated
Carbide End Mill Ø 15/32“ – 12 mm, 12 cutting edges, 25164for hardened materials, steel/cast iron/stainless steelBevel Width up to 15/64“ – 6 mmcoated
■ Solid Carbide Radius End Mill■ For the chamfering of workpiece edges■ Versatile use. When processing hard materials, radii should be bevelled in separate
work steps with increasing milling depth.■ The middle adjustment of the radius outline towards the edge of the workpiece is
effected by the axial adjustment of the motor in the clamping eye.
Solid Carbide Radius End Mill*, 5 cutting edges, right-hand twist, L = 89 mm
Prod.-No.R 3.0 25165R 4.0 25166R 5.0 25167
*Delivery time upon request.
Solid Carbide End Mills and Radius End Mills 1.5 – 2.0 – 2.5 upon request.
Prod.-No.Carbide End Mill Set in plastic packing 25169Content: 5 End MillsProd.-No. 25160, 25161, 25162, 25163, 25164Ideal as initial equipment.
Versatile use. When processing hard materials, radii should be bevelled in separate
Prod.-No. 25160
Prod.-No. 25161
Prod.-No. 25162
Prod.-No. 25163
Prod.-No. 25164
Prod.-No. 25166/25166/25167
ALFRA – separates the tools from the toys 69