drilling cuttings solidification / stabilization unit
TRANSCRIPT
www.gnsolidscontrol.com
1 / 5
Drilling Cuttings Solidification
Or Stabilization Unit
Cost can be relatively in-expensive for the treatment of both oil based and water based
drilling cuttings and waste.
The GN Solidification/Stabilization unit required is easily operated and maintained, also
since it’s adjustable preset capacity, it works continuously and automatically, so it needs
relatively few man hours, moreover, no chemical waste that requires further treatment is
produces.
The stabilization /solidification unit provide an effective method for processing oil- base was
te and water based waste; In a result, it produces an environmentally safe, dry material that
is acceptable for onsite, or land farming disposal at an approved waste facility.
Solidification of wastes involves the production of a solid mass having sufficiently high
structural integrity to allow transport and /or disposal of the solid without requiring
secondary containment. This technology converts hydrologic sensitive liquid and
semi-liquids waste in a physical form that can be stored safely.
Stabilization involves the immobilization of constituents in wastes by chemical alteration
to form insoluble compounds, or by entrapment within the solidified product.
Hebei GN Solids Control Co.Ltd.
www.gnsolidscontrol.com
2 / 5
1.Drill Cuttings Solidification/ Stabilization Unit Model GNGH-10A Treating capacity 10 m3/h Mixer tank volume 1500L High-shear mixer power 11KW Drilling waste storage volume
5m3
Drilling waste screw conveyor flow
≤15m³/h (VFD Adjustable)
Drilling waste screw conveyor power
7.5KW
Cement storage volume 1000L Cement conveyor flow 1500L/H (VFD Adjustable) Cement conveyor power 1.1KW Absorber storage volume 1000L Absorber conveyor flow 1500L/H (VFD Adjustable) Absorber conveyor power 1.1KW E.X. Standard ExdIIBt4 Overall dimension 11512x2200x2493mm Weight 8.5 ton Remarks: There is 2ea 1.5inch liquid inlet, for water feeding, liquid
chemical feeding, located beside the mixer inlet.
www.gnsolidscontrol.com
3 / 5
2.Working Process
2.1) Drilling waste collection hopper collects all the drill cuttings & drilling waste, which is
transported to the mixing chamber by the underneath screw conveyor at pre-set capacity.
2.2) Cement storage box is keeping cements powder, through the tubular screw conveyor,
powders are sent to the mixer at pre-set capacity.
2.3) In the same way, absorber is kept in a box, then sent to the mixer by tubular screw conveyor.
2.4)There are 2ea 1.5inch liquid inlet, for water feeding, liquid chemical feeding, located beside
the mixer inlet.
2.5)The high-shear mixer mixes all the material, and push to the front at the same time. When
the solids go to the discharge port, it is already mixed sufficiently, then discharge.
Drilling waste is solidified by our innovative blending technology and can be processed
continually on-site. The dosing rates of the absorber and the sludge, cements powder can be
adjusted accordingly. After processed, the drilling cuttings are eco-friendly and environmentally
safe for disposal.
Drilling waste collection hopper
Cement storage box
Absorber storage box
High-shear mixer
Liquid inlet
Mixer discharge
www.gnsolidscontrol.com
4 / 5
3.Overall Dimension Drawing
Remark: The GN Drill Cuttings Solidification Unit is skid mounted, without any disassembling, can be put into 40ft HQ container. Fully convenient for transportation in all around the world .
www.gnsolidscontrol.com
5 / 5
5. Contact Us
GN Solids Control ( China) Company: HeBei GN Solids Control Co.Ltd.
HQ Address: No.3 Industry Road,Dachang Chaobai River Development Area,Langfang,China 065300·
Location: 40KM to Beijing International Airport Tel: +86-316-5276988 / + 86-316-5276989 Fax: +86-316-5276997 / +86-316-5276990 Email: [email protected] Web: http://www.gnsolidscontrol.com
GN Solids Control ( America ) Company: GN Solids America LLC Solids Control Equipment for sale in stock Add: 6710 Windfern Road, Houston, TX 77040, USA TEL: +1-713-320-3868 / +1-713-8780880 Email: [email protected] Web: http://www.gnsolidsamerica.com
GN Solids Control ( Russia) Add:Г.Москва ,Радонежского Сергия Ул.д.2 TEL: +7-8(925)304 25 70 +7- 8(968)950 31 49 Email: [email protected] Web: http://www.gnsolidscontrol.ru