driveline system tractor linkage + implement mounting...
TRANSCRIPT
BYAUSTRALIAN CATALOGUE
2013
DRIVELINE SYSTEMTRACTOR LINKAGE +IMPLEMENT MOUNTING PARTS
Page 2
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
Agmaster - a new brand from WALTERSCHEID.Supplementary range for mechanical and hydraulic driveline
and coupling systems
You can now find your way in the confusing market for componentsand spare parts in driveline and coupling technology. WALTERSCHEID,
the world leader in agritechnical driveline and attachment systems, is presenting a new supplementary product range for mechanical
and hydraulic driveline and coupling systems. Agmaster was created as a brand name for manufacturers and users of equipment for
applications in agriculture, forestry, industrial and the building sector.
The new brand is being launched on the market with a decisive additional feature: “Serviced by WALTERSCHEID”
WALTERSCHEID has a reputation for high quality standards in agritechnical engineering and this is the basis for the choice of products bearing the new
brand name. All products are carefully tested and selected at WALTERSCHEID.
PAGE
DRI
VELI
NE
SYST
EM
PTO SHAFTS 3
CLUTCHES 3
UJ KIT 4
WEASLER NEAPCO SPICER 5
WEASLER WIDE ANGLE 6
BONDIOLI BYPY COMER 7 - 10
GEARBOXES 11
LIN
KAG
E PA
RTS
TOP LINKS 12
RATCHET ARM 12
TOP LINK PINS 12
LOWER LINK IMPLEMENT PINS 13
DRAWBAR HITCH PINS 14
CONVERSION BUSHES 14
DRAWBARS 14
LINCH PINS, R CLIPS ETC 15
TOW BALLS 15
An extensive range of products is available including Agmaster 3 point linkage, Walterscheid Driveline Systems and Tractor Attachment Systems.
Please refer to our other product catalogues or to our websitewww.walterscheid.com.au
AGMASTER CONTENTS
CONTENTS
This catalogue is the copyright of Walterscheid Australia.
Page 3
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
SERIES U/JOINTPART NUMBER
U/JOINTDIMENSIONS
WALTERSCHEIDEquivalent Series
LENGTH (mm)(Centre to Centre of UJ Closed)
AGMASTERPART NUMBER
1 4212000 22.0 x 54.8 W2100-00c/0a 510 AG1-510-SC2
1 4212000 22.0 x 54.8 W2100-00c/0a 1010 AG1-1010-SC2
2 4222000 23.8 x 61.2 W2200-0v/1 760 AG2-760-SC2
2 4222000 23.8 x 61.2 W2200-0v/1 1010 AG2-1010-SC2
2 4222000 23.8 x 61.2 W2200-0v/1 1510 AG2-1510-SC2
3 4232000 27.0 x 74.6 W2300-0v/1 760 AG3-760-SC2
3 4232000 27.0 x 74.6 W2300-0v/1 1010 AG3-1010-SC2
3 4232000 27.0 x 74.6 W2300-0v/1 1510 AG3-1510-SC2
3H 4232000 27.0 x 74.6 W2300-1b/2a 760 AG3H-760-SC2
3H 4232000 27.0 x 74.6 W2300-1b/2a 1010 AG3H-1010-SC2
3H 4232000 27.0 x 74.6 W2300-1b/2a 1510 AG3H-1510-SC2
4 4242000 32.0 x 76.0 W2400-1b/2a 1010 AG4-1010-SC2
4 4242000 32.0 x 76.0 W2400-1b/2a 1510 AG4-1510-SC2
5 4252000 36.0 x 89.0 W2500-S4/S5 1210 AG5-1210-SC2
Note : Standard WALTERSCHEID End Yokes and Fittings can be fitted to this range. All components interchangeable with WALTERSCHEID.
TYPE SERIES DESCRIPTION TORQUE HUBAGMASTER
PART NUMBERSHEAR BOLT
2 K61/1 910 Nm 1 3/8x6 QR 4220101
3 KB61/20 1860 Nm 1 3/8x6 QR 4230103
4 KB61/20 1860 Nm 1 3/8x6 QR 4240103
5 KB61/20 2920 Nm 1 3/8x6 QR 4250104
OVERLOAD RATCHET2 K32B 600 Nm 1 3/8x6 QR 4220201
3 K33B 900 Nm 1 3/8x6 QR 4230202
4 K34B 1200 Nm 1 3/8x6 QR 4240203
FRICTION2 K90/L2 800 Nm 1 3/8x6 QR 4220300
3 K90/L2 1000 Nm 1 3/8x6 QR 4230301
4 K90/L2 1350 Nm 1 3/8x6 QR 4240302
4 K90/4T 1500 Nm 1 3/8x6 CC 4240306
5 K90/4T 1500 Nm 1 3/8x6 CC 4250306
5 K90/4T 1500 Nm 1 3/4x20 CC 4250305
OVERRUNNING2 F5/1R 1 3/8x6 QR 4220000
3 F5/1R 1 3/8x6 QR 4230000
4 F5/1R 1 3/8x6 QR 4240000
5 F5/2R 1 3/4x20 CB 4250002
5 F5/1R 1 3/8x6 QR 4250003
AGMASTER PTO SHAFTS
AGMASTER CLUTCHES
DRIVELINEPTO + CLUTCHES
Page 4
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
TO SUIT SERIES TYPEDIMENSIONS (mm) AGMASTER
PART NUMBERY N A B
AGMASTER WALTERSCHEID BONDIOLI
1 1 22.0 54.0 4B12054
1 2100 1 22.0 54.8 4212000
2 2200 2 1 23.8 61.2 4222000
1 3 1 27.0 70.0 4B32070
3 2300 4 1 27.0 74.6 4232000
5 1 30.2 79.4 4B52079
220 6 1 30.2 92.0 4622000
4 2400 1 32.0 76.0 4242000
7 1 34.9 94.0 4B72094
240 8 1 34.9 106.4 4B82006
5 2500 1 36.0 89.0 4252000
AGMASTER WEASLER NEAPCO SPICER
1000 2 23.8 38.1 4702000
6 6 L600 2 24.6 37.7 4062000
12 12 1200 1140 2 27.0 46.04 4122000
14 14 2000 1240 1 28.6 66.7 4142000
14 80° 1430 80° 3 28.6 28.6 107.9 66.5 4142800
35 35 2200 1340 1 31.7 81.4 4352000
35 80° 3540 80° 3 31.8 28.6 107.9 81.3 4352800
44 44 44R 1440 2 33.3 70.64 4442000
44 80° 3545 80° 3 31.8 31.8 109.54 81.6 4442800
55 55 1 38.9 109.6 4552000
55 80° 5556 80° 3 38.9 33.3 79.77* 94.6 4552800
Special * Internal Circlip Dimension
TYPE 1Standard
TYPE 2Internal Circlip
TYPE 3Wide Angle 80º
UNIVERSAL JOINT KITS
DRIVELINE UNIVERSAL JOINTS
Interchange withBONDIOLI & PAVESI (BYPY)
WALTERSCHEIDWEASLER, NEAPCO, SPICER
Page 5
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
END YOKES + BAR YOKES SERIES TYPE AGMASTERPART NUMBER
12 1 3/8x6 Slide Collar 4121006
12 1 3/8x21 Slide Collar 4121321
12 Pilot Bore No Key 12-809-1208
12 1 x 1 1/4 Key 12-1135
12 1 1/4 x 5/16 Key 12-1139
12 1 1/4 x 6 Spl 12-1171
12 1 x 1 1/8 Rect Bar Yoke 12-300-1200
12 2 x 0.083 WeldYoke 12-28-111F6
14 1 3/8x6 QR Pin 4141006
14 1 3/8x6 Slide Collar 4141306
QR Pin14 1 3/8x21 Slide Collar 4141321
14 3/4 Pilot Bore No Key 14-809-1412
14 1 x1 1/8 Rect Bar Yoke 4143200
14 2 x 0.083 Weld Yoke 14-701-1400
35 1 1/8 HEX Slide Collar 4351319
35 1 3/8x6 QR Pin 4351006
35 1 3/8x6 Slide Collar 4351306
35 1 3/8x6 Clamp Bolt 4358506
35 1 3/8x21 Slide Collar 4351321
35 1 3/8x21 Clamp Bolt 4358521
35 1 3/4x6 Slide Collar 4351336
Clamp Bolt35 1 3/4x20 QR Pin 35-102-3520
35 1 3/4x20 Slide Collar 4351320
35 1 3/4x20 Clamp Bolt 4358540
35 Pilot Bore No Key 35-809-3516
35 1 3/16 Sq Bar Yoke 4353300
35 1 11/16 x 20 Bar Yoke 4353600
35 2 1/8 x 0.120 Weld Yoke 4357702
44 1 3/8x6 Slide Collar 4441306
44 1 3/8x6 Clamp Bolt 44-807-4406
44 1 3/8x21 Slide Collar 4441321
44 1 3/8x21 Clamp Bolt 4448521
44 1 3/4x20 Slide Collar 4441320
44 1 3/4x20 Clamp Bolt 4448540
Slide Collar44 Pilot Bore No Key 44-809-4416
44 1 5/16 Square BarYoke 4443400
44 2 1/2 x 0.120 Weld Yoke 4447902
55 1 3/8x6 Slide Collar 4551306
55 1 3/8x6 Clamp Bolt 4558506
55 1 3/8x21 Slide Collar 4551321
55 1 3/8x21 Clamp Bolt 4558521
55 1 3/4x6 Slide Collar 4551336
55 1 3/4x20 Slide Collar 4551320
55 1 3/4x20 Clamp Bolt 4558540
Bar Yoke55 1 3/4x27 Clamp Bolt 4558527
55 Pilot Bore No Key 55-809-5516
55 1 11/16 x 20 Bar Yoke 4553600
55 2 1/2 x 0.120 Weld Yoke 4557902
END YOKES - WEASLER + NEAPCO + SPICER
DRIVELINEDRIVELINE COMPONENTS
Page 6
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
NORTH AMERICAN WIDE ANGLE SHAFT PARTS SERIES TYPE AGMASTERPART NUMBER
14 1 3/8x6 80°Slide Collar 14-108-1406
14 1 3/8x21 80°Slide Collar 14-107-1421
14 80° Double Yoke 14-550-1430
14 80° Bar Yoke and Shaft 690mm 14-10101400
35 1 3/8x6 80°Slide Collar 35-112-3506
35 1 3/8x21 80°Slide Collar 35-112-3521
35 80° Double Yoke 35-550-3540
35 80° Bar Yoke and Shaft 690mm 35-10103501
35/44 1 3/8x6 80°Slide Collar 35-107-3506
35/44 1 3/8x21 80°Slide Collar 35-107-3521
35/44 1 3/4x20 80°Slide Collar 35-107-3520
35/44 80° Double Yoke 44-550-3545
35/44 80° Bar Yoke and Shaft 690mm 44-10103500
55 1 3/8x6 80°Slide Collar 55-107-5506
55 1 3/8x21 80°Slide Collar 55-107-5521
55 1 3/4x20 80°Slide Collar 55-107-5520
55 80° Double Yoke 55-550-5556
55 1 11/16 x 20 80°Bar Yoke 55-10105500
BAR + NIBS + DRIVE TUBE SERIES TYPE AGMASTERPART NUMBER
Bar
14 1x1 1/8 Rect x 3 4124203
14 1x1 1/8 Rect x 10 4124210
35 1 3/16 Sq x 3 4354303
35 1 3/16 Sq x 10 4354310
44 1 5/16 Sq x 3 4444403
35/44/55 1 11/16x20Spl x 3 4024203
Nibs
12/14 1 x 1 1/8 - 2 x 0.083 4125205
35 1 3/16 Sq - 2 1/8 x 0.120 35-500-3500
35/44 1 11/16x20Spl - 2 1/8 x 0.120 35-503-3500
44 1 5/16 Sq - 2 1/2 x 0.120 44-500-4400
Round Tube 1000mm
Drive Nib Bar 35 2 1/8 x 0.120 35-603-3500
44 2 1/2 x 0.120 44-603-4400
WIDE ANGLE PARTS - WEASLER
DRIVE BAR + NIBS - WEASLER
DRIVELINE DRIVELINE COMPONENTS
Page 7
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
END YOKESSERIES
TYPE AGMASTERPART NUMBERBYPY COMER
1 T101 3/8x6 QR Pin 4B11006
1 3/8x21 QR Pin 4B11021
2 T20 Refer to Genuine Walterscheid series 2200
3 T30
1 3/8x6 QR Pin 4B31006
1 3/8x6 Slide Collar 4B31306
1 3/8x21 QR Pin 4B31021
1 3/8x21 Slide Collar 4B31321
4 T40 Refer to Genuine Walterscheid series 2300
5 T50
1 3/8x6 QR Pin 4B51006
QR Pin 1 3/8x6 Slide Collar 4B51306
1 3/8x21 QR Pin 4B51021
1 3/8x21 Slide Collar 4B51321
1 3/8x21 Clamp Bolt 4B58521
1 3/4x20 QR Pin 4B51020
6 T60
1 3/8x6 QR Pin 4B61006
1 3/8x6 Slide Collar 4B61306
1 3/8x6 Clamp Bolt 4B68506
1 3/8x21 QR Pin 4B61021
1 3/8x21 Slide Collar 4B61321
1 3/8x21 Clamp Bolt 4B68521
1 3/4x20 QR Pin 4B61020
Slide Collar 1 3/4x20 Slide Collar 4B61320
1 3/4x20 Clamp Bolt 4B68540
7 T70
1 3/8x6 QR Pin 4B71006
1 3/8x6 Slide Collar 4B71306
1 3/8x21 QR Pin 4B71021
1 3/8x21 Slide Collar 4B71321
1 3/4x6 QR Pin 4B71036
1 3/4x20 QR Pin 4B71020
1 3/4x20 Slide Collar 4B71320
8 T80
1 3/8x6 QR Pin 4B81006
1 3/8x6 Slide Collar 4B81306
1 3/8x6 Clamp Bolt 4B88506
1 3/8x21 QR Pin 4B81021
Clamp Bolt 1 3/8x21 Slide Collar 4B81321
1 3/8x21 Clamp Bolt 4B88521
1 3/4x6 QR Pin 4B81036
1 3/4x20 QR Pin 4B81020
1 3/4x20 Slide Collar 4B81320
1 3/4x20 Clamp Bolt 4B88540
SPLINED END YOKES - COMER + BONDIOLI & PAVESI (BYPY)
DRIVELINEDRIVELINE COMPONENTS
Page 8
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
END YOKESSERIES
TYPE AGMASTERPART NUMBERBYPY COMER
1 T10
3/4 Bore x 3/16 Key Clamp Bolt T10-021-074
1 Bore x 1/4 Key Clamp Bolt T10-021-075
20mm Bore x 6mm Key T10-011-061
25mm Bore x 8mm Key T10-011-062
2 T20 Refer to Genuine Walterscheid series 2200
QR Pin 4 T40 Refer to Genuine Walterscheid series 2300
6 T60
1 1/4 Bore x 5/16 Key Clamp Bolt T60-026-103
1 3/8 Bore x 5/16 Key Clamp Bolt T60-026-104
Solid Hub - No Bore or Key T60-016-000
1 1/4 Bore x 5/16 Key T60-016-091
1 3/8 Bore x 5/16 Key T60-016-092
7 T70 Solid Hub - No Bore or Key T70-017-000
Slide Collar
8 T80
35mm Bore x 10mm Key Clamp Bolt T80-028-076
40mm Bore x 12mm Key Clamp Bolt T80-028-077
Solid Hub - No Bore or Key T80-018-000
9 T90
1 1/4 Bore x 5/16 Key Clamp Bolt T90-029-024
1 3/8 Bore x 5/16 Key Clamp Bolt T90-029-068
40mm Bore x 12mm Key Clamp Bolt T90-029-077
Clamp Bolt 40mm Bore x 12mm Key T90-019-073
BORE & KEY END YOKES - COMER + BONDIOLI & PAVESI (BYPY)
DRIVELINE DRIVELINE COMPONENTS
Page 9
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
TUBE YOKES - TRILOBESERIES
TYPE AGMASTERPART NUMBERBYPY COMER
1 T10inner 4B13026
outer 4B17033
2 T20inner 4B23029
outer 4B27036
3 T30inner 4B33036
outer 4B37043
4 T40inner 4B43036
outer 4B47044
5 T50inner 4B53045
outer 4B57052
6 T60inner 4B63045
outer 4B67054
7 T70inner 4B73045
outer 4B77054
8 T80inner 4B83054
outer 4B87063
TUBE YOKES - MULTILOBE COMER V Series
Only TYPE COMERPART NUMBER
V40inner V40-014-428
outer V40-014-427
V60inner V60-016-389
outer V60-016-388
V80inner V80-018-242
outer V80-018-241
V90inner V90-019-167
outer V90-019-166
TUBE YOKES - COMER + BONDIOLI & PAVESI (BYPY)
DRIVELINEDRIVELINE COMPONENTS
Page 10
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
TUBE YOKES WIDE ANGLE - TRILOBE COMER T SeriesOnly TYPE COMER
PART NUMBER
T40inner T40-024-269
outer T40-024-263
T60inner T60-026-249
outer T60-026-229
T80inner T80-028-165
outer T80-028-152
TUBE YOKES WIDE ANGLE - MULTILOBE COMER V SeriesOnly TYPE COMER
PART NUMBER
V40inner V40-024-434
outer V40-024-433
V60inner V60-026-391
outer V60-026-390
V80inner V80-028-249
outer V80-028-248
TUBE TRILOBE - Length 1500mmSERIES
TYPE AGMASTERPART NUMBERBYPY COMER
1 T10inner 26.5x3.4 4B04526
outer 32.5x2.6 4B06533
2 T20inner 29.0x4.1 4B04529
outer & inner 36.0x3.2 4B06536
3 T30
outer 43.5x3.4 4B06543
4 T40inner 36.0x3.9 4B04537
5 T50inner 45.0x3.9 4B04545
6 T60
5 T50 outer 51.5x3.0 4B06552
6 T60 outer 54.0x4.5
4B065547 T70 outer 54.0x4.5
8 T80 inner 54.0x4.5
7 T70 inner 45.0x5.4 4B04546
8 T80 outer 63.0x4.1 4B06563
TUBE MULTILOBE - Length 1000mm COMER V SeriesOnly TYPE AGMASTER
PART NUMBER
V40inner 39.3x4.5 191-140-700
outer 45.7x3.0 191-140-800
V60
inner 50.2x4.5 191-160-700
outer 57.6x3.5 191-160-800
outer 57.6x3.5 RilsanCoated 191-160-850
V80V90
inner 58.1x5.0 191-190-700
outer 66.5x4.0 191-190-800
outer 66.5x4.0 RilsanCoated 191-190-850
WIDE ANGLE TUBE YOKES - COMER + BONDIOLI & PAVESI (BYPY)
DRIVE TUBE - COMER + BONDIOLI & PAVESI (BYPY)
DRIVELINE DRIVELINE COMPONENTS
Page 11
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
SLASHER GEARBOXMax H.P.
Weight Kg Body Size Mounting Holes Pattern Ratios TYPE
2518.0
164 x 244 x 137 121.2 sq
1:1.92 & 1:2.82CG-25L
18.0 CG-25T
4022.0
1:1.47 & 1:1.92 & 1:2.3CG-32L
22.0 CG-32T
5533.0
196 x 237 x 152 171.5 pcd 4 hole1:1.47 & 1:1.67 & CG-45L
33.0 1:1.86 & 1:2.15 CG-45T
76
33.0238 x 281.5 x 196 190 pcd 6 hole
CG-65L
33.0 1:1.25 & 1:1.46 & CG-65T
34.0238 x 292.2 x 196 176 pcd 6 hole
1:1.5 & 1:1.92 CG-65L-L
34.0 CG-65L-T
11058.0
270 x 298 x 230 200 sq1:1 & 1:1.25 & 1:1.5 & CG-90L
58.0 1:1.87 CG-90T
POST HOLE DIGGER GEARBOXMax H.P.
Weight Kg Body Size Input
ShaftOutputShaft Ratios TYPE
45 22.0 205x165 25mm 50mm 2.92:1 GB-70-45
60 28.0 219x199 1 3/8x6 2” 3:1 GB-80-60
58 28.0 236x227 31.75 50mm 3.18:1 GB-85-60
90 50.0 280x278 37.75 2” 4:1 GB-90-90
ALUMINIUM - COMPACT BEVEL RIGHT ANGULAR GEARBOXMax H.P.
WeightKg Body Size Mounting Holes Pattern TYPE
11 3.6 132x150x84 80 sq AL-11
15 4.7 149x176x96 90 sq AL-15
25 7.5 164x204.5x105 108 sq AL-25
STEEL - COMPACT BEVEL RIGHT ANGULAR GEARBOXMax H.P.
WeightKg Body Size Mounting Holes Pattern TYPE
15 9.0 135x170x12380 sq
T-15
28 11.0 170x196x130 T-28
36 15.0 178x203x145 88 sq T-36
45 21.0 205x235x165 105x110 rect T-45
55 23.0 205x277x205 100x115 rect T-55
110 31.0 244x309x190 127 sq T-110
150 55.0 312x374x260 170 sq T-150
55 21.0 190x255x16084x114 rect
TV-55
55 22.0 190x263x160 TV-55SG
82 42.0 225x324x220 100x140 rect TV-82
145 48.0 250x367x210 120x150 rect TV-145
Note: All Gearboxes available as Left or Right Hand direction with various Ratios and Shaft Sizes.A comprehensive catalogue is available with detailed specifications and other types.Refer to website or contact offices.
AGMASTER GEARBOXES
GEARBOXGEARBOX
Page 12
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
CAT LLENGTH
DEye Diameter
THREADSIZE
PARTNUMBER
0 340 - 460 16 3/4” x 10 UNC 8071692
1 380 - 520 19 1 1/8” x 7 UNC 8400002
1 555 - 730 19 1 1/8” x 7 UNC 8400011
2 535 - 785 25.4 1 1/8” x 7 UNC 8401610
2 620 - 830 25.4 M30 x 3 8400012
2 HD 640 - 840 25.4 M36 x 3 8400008
3 HD 610 - 870 32 M36 x 3 8400009
Note : A further range of Top Links available in the Walterscheid TAS catalogue.
CAT LUsable Length
DEye Diameter
THREADSIZE
PARTNUMBER
2 510 - 720 25.4 1 1/4” ACME 8400052
CAT APin Diameter
LUsable Length
DDiameter
PARTNUMBER
0 16 80 7.5 8401603
1 19 85 12 8401512
1 19 95 12 8401513
2 25.4 83 12 8401605
2 25.4 110 12 8401557
2 25.4 135 12 8401518
3 32 125 12 8401558
LINKAGE MOUNTING ACCESSORIES
TOP LINKS
RATCHET ARM
TOP LINK IMPLEMENT PIN
Page 13
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
CAT APin Diameter
LUsable Length
DDiameter
PARTNUMBER
1 22 113 12 8401589
2 28.4 113 12 8401590
CAT DIMENSIONS PARTNUMBER
1 - 2 Refer to Diagram 8401591
CAT A BThread Length L C
Usable LengthTHREAD
SIZEPART
NUMBER
1 22 40 140 50 M22 8401500
1 22 47 137 51 3/4 UNF 8066503
2 28 45 149 60 M22 8401551
2 28.5 60 164 57 1 1/8 UNF 8066502
3 36.5 38 146 54 1 3/8 UNF 8066504
B
A A BPART
NUMBER19 227 8076204
LINKAGEMOUNTING ACCESSORIES
LOWER LINK IMPLEMENT PIN
(DUAL CAT) LOWER LINK IMPLEMENT PIN
LOWER LINK BOLT-ON PIN
HINGE PIN
Page 14
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
A LUsable Length
PARTNUMBER
19 98 8401559
19 157 8401506
22 157 8401507
25.4 157 8401508
28.6 160 8401594
32 160 8401595
35 183 8401592
38 185 8401593
A LUsable Length
PARTNUMBER
19 89 8401609
CAT TYPE OD ID L PART
NUMBER1 - 2 Top Link 25.4 19 44 8401520
1 - 2 Lower Link 28.6 22 45 8401521
2 - 3 Lower Link 37 28.6 45 8401522
2 - 3 Top Link 32 25.4 51 8401579
3 - 4 Top Link 37 32 51 8401580
LINKAGE MOUNTING ACCESSORIES
CONVERSION BUSHES
DRAW BAR HITCH PINS
L A
L
Ø EØ D
C
B
CAT B x C Ø E LENGTHL
HOLE ØD
NUMBEROF HOLES
PARTNUMBER
1 63 x 30 22 800 22 9 8402001
2 75 x 30 28 935 22 11 8402003
DRAWBARS
Page 15
BY
AGMASTER CATALOGUE 2013 (VERSION 3.0)
LINKAGEMOUNTING ACCESSORIES
A B PART
NUMBER A B PARTNUMBER
6 63 8076208 6 57 8076205
8 63 8076207 8 57 8401571
10 63 8076206 10 57 8401572
D LUsable Length
PARTNUMBER D L
Usable LengthPART
NUMBER4.5 32 8401523 2 38 8401530
6 36 8401524 2.5 40 8401AP9
8 36 8401526 3 61 8401531
11 36 8401529 4 75 8401532
16 45chain attached 8401596
5 85.5 8401533
6 82.5 8401534
7 96 8401535
TO SUIT PIN PARTNUMBER BALL THREAD PART
NUMBER
21mm 8401606 50 mm 7/8” 8401607
2 inch 3/4” 8401608
LINCH PIN R CLIP
LOWER LINK IMPLEMENT PIN LOWER LINK IMPLEMENT PIN
SPRING CLIP TOWBALL
SAFETY LOCK HITCH PIN
A B C PARTNUMBER
12.7 108 152 8076198
16 108 152 8076199
19 108 152 8076200
19 159 203 8076201
22 159 203 8076202
25.4 159 203 8076203
SA WA NT New ZealandJAYBEN AUSTRALIA
PTY LTDABN 69 050 241 033
WALTERSCHEID(NZ) LTD
11 Frederick Road, Royal Park 63 Colombo Street, HamiltonPO BOX 2020 Port Adelaide PO BOX 5477
South Australia 5015 New ZealandPHONE 08 8341 1377 PHONE 07 846 7040FAX 08 8341 1677 FAX 07 846 7041MOBILE 0429 699 593 MOBILEEMAIL [email protected] EMAIL [email protected] www.jayben.com.au WEB
VIC NSW TAS QLDWALTERSCHEID - VIC
AUSTRALIAABN 52 099 707 856
WALTERSCHEID - QLDAUSTRALIA
ABN 52 099 707 856
17-31 Discovery Road, Dandenong South 12A Pradella Street, DarraVictoria 3175 Queensland 4076
PO BOX 4262, Dandenong South, Vic. 3164PHONE 03 9580 7300 PHONE 07 3117 2850FAX 03 9580 0379 FAX 07 3117 2851MOBILE 0419 319 885 MOBILE 0438 118 577EMAIL [email protected] www.walterscheid.com.au
BYAUSTRALIAN CATALOGUE
AGMASTER CATALOGUE 2013 (VERSION 3.0) This catalogue is the copyright of Walterscheid Australia.