driven and static tooling for dmg · driven and static tooling for dmg 10139 bergin rd. howell, mi...

DRIVEN and STATIC TOOLING

For

DMG

10139 BERGIN RD. HOWELL, MI 48843 PHONE : 877-91-TOOLS ( 810-632-4446 ) FAX: 877-92-TOOLS ( 810-632-4467 ) EMAIL: [email protected] WEBSITE: www.mdtooling.com Spring 2013

mailto:[email protected]

http://www.mdtooling.com/

DMG - Machine Model Cross Reference List

VDI30 DIN 5482

CTX 310 ALT

CTX 310 ECO

CTX 400

VDI30 DIN 5480Alpha 300/500

Beta 500/800/1250

CTX 210/310/410/320/420

CTV 160

GM 70

NEF 400

Twin 42/65

Twin 42/65/102

Sprint 50/65

VDI40 DIN 5482CTX 400/500

CTX 510 ECO

VDI40 DIN 5480Beta 500/800/1250

CTX 410/420/510/520

CTV 200/250

CTX Gamma 1250/2000

GMX250/300/400

NEF600

Twin 42/65

Twin 42/65/102

Sprint 65

VDI50 DIN 5482CTX 600/700

NOTE: The VDI sizes above list the machines with that model of turret.

However, please be aware that all tools offered in each VDI may not

fit every machine model listed.

Live Tooling M. T. Marchetti, a major live tool manufacturer in northern Italy, is a leader in live tool technology. The formula is simple. Use only the best angular contact high-speed bearings available. Add to this an exacting tolerances for all ground shafts, gears and bearing pocket features. Next, develop a sealed system that will not allow any contamination from chips or coolant. Top this all off with a superior design and you end up with a live tool that is more rigid, faster and will last longer. We back this up with a 2-Year factory warranty.

Our Live Tool Warranty Our tooling will give years of service in the most demanding applications. The superior design and rugged construction has proven this over the last 12 years. The reliability of our tools allows us to provide a 2-year factory warranty. MD TOOLING will repair any defective tool holders for a period of 2 years from the date of purchase.

Product Range We have the largest range of live tooling available for most major machine tool manufactures. Our available products include an extensive line of standard live tooling as well as specialty toolholders such as 0-90 and 0-180 adjustable angle tool holders, gear hobbers, and even worm gear generators. Our product range includes geared up holders to 60,000 RPM and are engineered for 1,000 PSI coolant through. We are an industry leader in providing complete tooling solutions with hundreds of static tool options as well.

Technical Support Here at MD Tooling we have a full technical support department with over 25 years of CNC experience. Our highly qualified staff can help with part processing, tooling up a job from a blue print and even assist with part programming. Applications Engineers are always available by phone to answer any questions you may have about our tooling or any other CNC related issue.

Stock and Replenishment MD Tooling maintains an extensive inventory of tooling in our warehouse in Michigan. Our current “fi ll” rate on orders is 93% from our stock in Michigan for same day shipping. Should you require a non-stock item, our manufacturer, M.T. Marchetti also maintains a large inventory in Italy. Tooling can be obtained in as little as 3-5 business days.

Shipping MD Tooling realizes that when you need tooling, often you can’t wait until the next day. We process orders and ship from available stock right up until 5PM EST to make certain we get your tooling solutions to you as quickly as possible. We regularly ship throughout the day via DHL, UPS, FedEx or any other carrier that a customer requests.

10139 Bergin Road Howell, MI 48843 Phone: 810 632-4446 Fax: 810 632-4467 Email: [email protected] Web: www.mdtooling.com

Fast, Friendly, Reliable Service!

Quality tooling at highly competitive pricing.

2-Year Warranty on all live tools.

Extensive inventory. We currently ship over 93% of all orders same day.

In-house repair services available.

If a warranty tool needs to be returned for inspection, service or repair, loaner tools are available to keep you up and running.

More specialty tool holders than any other manufacturer.

Custom tool holders available.

All available tooling may not be shown in this catalog. If you can’t find the holder you’re looking for, please contact this office for assistance.

VDI30 DIN 5482 1DRIVEN 1

AXIAL DRIVEN TOOL VDI30 DIN 5482 1RADIAL DRIVEN TOOL VDI30 DIN 5482 2RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5482 H-75 3RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5482 H-85 4


AXIAL DRIVEN TOOL VDI30 DIN 5480 5GEARED DOWN AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480 5GEARED UP AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480 6RADIAL DRIVEN TOOL VDI30 DIN 5480 H=85 6RADIAL DRIVEN TOOL VDI30 DIN 5480 H=100 7RADIAL GEARED UP 1:2 DRIVEN TOOL VDI30 DIN 5480 8RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-75 9RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-85 10RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-100 11OPPOSITE FACE RADIAL DRIVEN TOOL VDI30 DIN 5480 H-85 12OPPOSITE FACE RADIAL TWIN DRIVEN TOOL VDI30 DIN 5480 H-100 12GEAR HOBBER VDI30 DIN 5480 12


AXIAL DRIVEN TOOL VDI40 DIN 5482 13AXIAL REDIRECTED DRIVEN TOOL VDI40 DIN 5482 13AXIAL GEARED DOWN REDIRECTED DRIVEN TOOL VDI40 DIN 5482 14AXIAL GEARED-UP I=1:2 DRIVEN TOOL RE-DIRECTED B Y 42mm VDI40 14RADIAL REAR-SET DRIVEN TOOL VDI40 DIN 5482 H-85 150-90 ADJUSTABLE ANGLE VDI40 DIN 5482 15GEAR HOBBER VDI40 DIN 5482 16


AXIAL DRIVEN TOOL VDI40 DIN 5480 17AXIAL GEARED DOWN I=2:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 17AXIAL GEARED DOWN I=3:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 18AXIAL GEARED UP 1=1:2 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 18RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y VDI40 DIN5480 19RADIAL DRIVEN TOOL VDI40 DIN 5480 H-70 19RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-70 20RADIAL DRIVEN TOOL VDI40 DIN 5480 H-100 20RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-100 21RADIAL GEARED UP 1:3 DRIVEN TOOL VDI40 DIN 5480 21RADIAL DRIVEN TOOL VDI40 DIN 5480 H-130 22RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-130 22RADIAL REAR SET DRIVEN TOOL VDI40 DIN 5480 H-85 23RADIAL REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100 23RADIAL GEARED DOWN 2:1 REAR-SET DRIVEN TOOL VDI40 DIN 5480 24RADIAL GEARED UP 1:2 REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100 25OPPOSITE FACE RADIAL DRIVEN TOOL VDI40 DIN 5480 26GEAR HOBBER OFF-SET VDI40 DIN 5480 26GEAR HOBBER VDI40 DIN 5480 27


AXIAL REDIRECTED DRIVEN TOOL VDI50 DIN 5482 28RADIAL REAR-SET DRIVEN TOOL VDI50 DIN 5482 H-100 28GEAR HOBBER VDI50 DIN 5482 29

ACCESSORIES 30DRIVEN 30

MTSK-40 QUICK CHANGE TOOLHOLDER CLAMP CHART 30

Table of ContentsCategorized Listing

VDI30 DIN 5482DRIVENAXIAL DRIVEN TOOL VDI30 DIN 5482

PartNumber Description Spindle I RPM CoolantThru

ExtCoolant

A1 A2 A3 B D LSAU0170125 Axial ER25 Standard ER25 1:1 6000 X 80.66 56SAU0170225 Axial ER25A Standard ER25A 1:1 6000 X 70.03 45SAU0171125 Axial ER25 Coolant Thru* ER25 1:1 6000 X X 94.66 59SAU0171225 Axial ER25A Coolant Thru* ER25A 1:1 6000 X X 84.03 59SAU0170416 Axial Milling Head D=16, L=17 16x17 1:1 6000 X 59.5 45 16 17SAU0170422 Axial Milling Head D=22, L=19 22x19 1:1 6000 X 61.5 45 22 19SAU0170316 Axial Weldon 16 Standard Weldon 16 1:1 6000 X 66.5 45SAU0171316 Axial Weldon 16 Coolant Thru* Weldon 16 1:1 6000 X X 80 59

All prices are subject to change without notice and we reserve the right to correct misprints.

Spring 2013 : www.mdtooling.com Phone: 810-632-4446 : Fax: 810-632-4467 1

VDI30 DIN 5482DRIVENRADIAL DRIVEN TOOL VDI30 DIN 5482

PartNumber Description Orient. Spindle RPM CoolantThru

ExtCoolant

A1 A2 B D LSAU0180125 Radial ER25 RH H85 Standard Right ER25 6000 X 38SAU0180225 Radial ER25 RH H85 Coolant Thru* Right ER25 6000 X X 48SAU0180416 Radial Milling Head D=16, L=17 RH H85 Right 16x17 6000 X 45 38 16 17SAU0180422 Radial Milling Head D=22, L=19 RH H85 Right 22x19 6000 X 47 38 22 19SAU0180316 Radial Weldon 16 RH H85 Standard Right Weldon 16 6000 X 54.5 38SAU0181125 Radial ER25 LH H85 Standard Left ER25 6000 X 38SAU0181225 Radial ER25 LH H85 Coolant Thru* Left ER25 6000 X X 48SAU0181416 Radial Milling Head D=16, L=17 LH H85 Left 16x17 6000 X 45 38 16 17SAU0181422 Radial Milling Head D=22, L=19 LH H85 Left 22x19 6000 X 47 38 22 19SAU0181316 Radial Weldon 16 LH H85 Standard Left Weldon 16 6000 X 54.5 38



VDI30 DIN 5482DRIVENRADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5482 H-75

PartNumber Description Orient. Spindle I RPM CoolantThru

ExtCoolant

A1 A2 BSAU0200120 Rear-set ER20 RH H75 Standard Right ER20 1:1 6000 X 41.16 73.5SAU0200125 Rear-set ER25 RH H75 Standard Right ER25 1:1 6000 X 42.16 73.5SAU0200225 Rear-set ER25 RH H75 Coolant Thru* Right ER25 1:1 6000 X X 42.16 83.5SAU0200325 Rear-set ER25A RH H75 Standard Right ER25A 1:1 6000 X 28.5 73.5SAU0200425 Rear-set ER25A RH H75 Coolant Thru* Right ER25A 1:1 6000 X X 28.5 83.5SAU0200516 Rear-set Weldon 16 RH H75 Right Weldon 16 1:1 6000 X 27.5 73.5SAU0201125 Rear-set ER25 LH H75 Standard Left ER25 1:1 6000 X 42.16 73.5SAU0201225 Rear-set ER25 LH H75 Coolant Thru* Left ER25 1:1 6000 X X 42.16 83.5SAU0201325 Rear-set ER25A LH H75 Standard Left ER25A 1:1 6000 X 28.5 73.5SAU0201425 Rear-set ER25A LH H75 Coolant Thru* Left ER25A 1:1 6000 X X 28.5 83.5SAU0201120 Rear-set ER20 LH H75 Standard Left ER20 1:1 6000 X 41.16 73.5SAU0201516 Rear-set Weldon 16 LH H75 Left Weldon 16 1:1 6000 X 27.5 73.5





ExtCoolant

A1 A2 BSAU0210120 Rear-set ER20 RH H85 Standard Right ER20 1:1 6000 X 41.16 73.5SAU0210125 Rear-set ER25 RH H85 Standard Right ER25 1:1 6000 X 42.16 73.5SAU0210225 Rear-set ER25 RH H85 Coolant Thru* Right ER25 1:1 6000 X X 42.16 83.5SAU0210325 Rear-set ER25A RH H85 Standard Right ER25A 1:1 6000 X 28.5 73.5SAU0210425 Rear-set ER25A RH H85 Coolant Thru* Right ER25A 1:1 6000 X X 28.5 83.5SAU0210516 Rear-set Weldon 16 RH H85 Standard Right Weldon 16 1:1 6000 X 27.5 73.5SAU0211120 Rear-set ER20 LH H85 Standard Left ER20 1:1 6000 X 41.16 73.5SAU0211125 Rear-set ER25 LH H85 Standard Left ER25 1:1 6000 X 42.16 73.5SAU0211225 Rear-set ER25 LH H85 Coolant Thru* Left ER25 1:1 6000 X X 42.16 83.5SAU0211325 Rear-set ER25A LH H85 Standard Left ER25A 1:1 6000 X 28.5 73.5SAU0211425 Rear-set ER25A LH H85 Coolant Thru* Left ER25A 1:1 6000 X X 28.5 83.5SAU0211516 Rear-set Weldon 16 LH H85 Standard Left Weldon 16 1:1 6000 X 27.5 73.5





ExtCoolant

A1 A2 A3 B D LSAU0070125 Axial ER25 Standard ER25 1:1 6000 X 80.66 45SAU0071125 Axial ER25 Coolant Thru* ER25 1:1 6000 X X 94.66 59SAU0070225 Axial ER25A Standard ER25A 1:1 6000 X 61 45SAU0071225 Axial ER25A Coolant Thru* ER25A 1:1 6000 X X 84.03 59SAU0070316 Axial Weldon 16 Standard Weldon 16 1:1 6000 X 66.5 56SAU0071316 Axial Weldon 16 Coolant Thru* Weldon 16 1:1 6000 X X 80 70SAU0070416 Axial Milling Head D=16, L=17 16x17 1:1 6000 X 59.5 56 16 17SAU0070422 Axial Milling Head D=22, L=19 22x19 1:1 6000 X 61.5 56 22 19

GEARED DOWN AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480

PartNumber Description Orient. Spindle I RPM ExtCoolant

SAU0100325 Geared Down ER25 Standard RH Right ER25 2:1 3000 XSAU0101325 Geared Down ER25 Standard LH Left ER25 2:1 3000 X



VDI30 DIN 5480DRIVENGEARED UP AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480


SAU0100225 Geared Up ER25 Standard RH Right ER25 1:2 12000 XSAU0101225 Geared Up ER25 Standard LH Left ER25 1:2 12000 X

RADIAL DRIVEN TOOL VDI30 DIN 5480 H=85

PartNumber Description Orient. Spindle I RPM CoolThru

ExtCool

A1 A2 B D LSAU0080125 Radial ER25 RH H85 Standard Right ER25 1:1 6000 X 38SAU0080225 Radial ER25 RH H85 Coolant Thru* Right ER25 1:1 6000 X X 48SAU0080416 Radial Milling Head D=16, L=17 RH

H85Right 16x17 1:1 6000 X 45 38 16 17

SAU0080422 Radial Milling Head D=22, L=19 RHH85

Right 22x19 1:1 6000 X 47 38 22 19SAU0080316 Radial Weldon 16 RH H75 Standard Right Weldon 16 1:1 6000 X 54.5 38SAU0081125 Radial ER25 LH H85 Standard Left ER25 1:1 6000 X 38SAU0081225 Radial ER25 LH H85 Coolant Thru* Left ER25 1:1 6000 X X 48SAU0081416 Radial Milling Head D=16, L=17 LH

H85Left 16x17 1:1 6000 X 45 38 16 17

SAU0081422 Radial Milling Head D=22, L=19 LHH85

Left 22x19 1:1 6000 X 47 38 22 19SAU0081316 Radial Weldon 16 LH H85 Standard Left Weldon 16 1:1 6000 X 54.5 38



VDI30 DIN 5480DRIVENRADIAL DRIVEN TOOL VDI30 DIN 5480 H=100

PartNumber Description Orient. Spindle I RPM CoolThru

ExtCool

A1 A2 B D LSAU0160125 Radial ER25 RH H100 Standard Right ER25 1:1 6000 X 38SAU0160225 Radial ER25 RH H100 Coolant Thru* Right ER25 1:1 6000 X X 48SAU0160416 Radial Milling Head D=16, L=17 RH

H100Right 16x17 1:1 6000 X 45 38 16 17

SAU0160422 Radial Milling Head D=22, L=19 RHH100

Right 22x19 1:1 6000 X 47 38 22 19SAU0160316 Radial Weldon 16 RH H100 Standard Right Weldon 16 1:1 6000 X 54.5 38SAU0161125 Radial ER25 LH H100 Standard Left ER25 1:1 6000 X 38SAU0161225 Radial ER25 LH H100 Coolant Thru* Left ER25 1:1 6000 X X 48SAU0161416 Radial Milling Head D=16, L=17 LH

H100Left 16x17 1:1 6000 X 45 38 16 17

SAU0161422 Radial Milling Head D=22, L=19 LHH100

Left 22x19 1:1 6000 X 47 38 22 19SAU0161316 Radial Weldon 16 LH H100 Standard Left Weldon 16 1:1 6000 X 54.5 38SAU0162125 Radial ER25 Universal H100 Standard Universal ER25 1:1 6000 X 38SAU0162225 Radial ER25 Universal H100 Coolant

Thru*Universal ER25 1:1 6000 X X 48

SAU0162416 Radial Milling Head D=16, L=17Universal H100

Universal 16x17 1:1 6000 X 45 38 16 17SAU0160422 Radial Milling Head D=22, L=19

Universal H100Universal 22x19 1:1 6000 X 47 38 22 19

SAU0162316 Radial Weldon Univeral H100Standard

Universal Weldon 16 1:1 6000 X 54.5 38



VDI30 DIN 5480DRIVENRADIAL GEARED UP 1:2 DRIVEN TOOL VDI30 DIN 5480


ExtCoolant

BSAU0340120 Radial Geared-Up RH1:2 ERA20 ERA20 1:2 12000 X 50.5SAU0341120 Radial Geared-Up LH1:2 ERA20 ERA20 1:2 12000 X 50.5SAU0340220 Radial Geared-Up RH1:2 ERA20 Coolant Thru* ERA20 1:2 12000 X X 58.5SAU0341220 Radial Geared-Up LH1:2 ERA20 Coolant Thru* ERA20 1:2 12000 X X 58.5





ExtCoolant

A1 A2 BSAU0090125 Rear-set ER25 RH H75 Standard Right ER25 1:1 6000 X 42.16 73.5SAU0090225 Rear-set ER25 RH H75 Coolant Thru* Right ER25 1:1 6000 X X 42.16 83.5SAU0090325 Rear-set ER25A RH H75 Standard Right ER25A 1:1 6000 X 28.5 73.5SAU0090425 Rear-set ER25A RH H75 Coolant Thru* Right ER25A 1:1 6000 X X 28.5 83.5SAU0090516 Rear-set Weldon 16 RH H75 Standard Right Weldon 16 1:1 6000 X 27.5 73.5SAU0091125 Rear-set ER25 LH H75 Standard Left ER25 1:1 6000 X 42.16 73.5SAU0091225 Rear-set ER25 LH H75 Coolant Thru* Left ER25 1:1 6000 X X 42.16 83.5SAU0091325 Rear-set ER25A LH H75 Standard Left ER25A 1:1 6000 X 28.5 73.5SAU0091425 Rear-set ER25A LH H75 Coolant Thru* Left ER25A 1:1 6000 X X 28.5 83.5SAU0091516 Rear-set Weldon 16 LH H75 Standard Left Weldon 16 1:1 6000 X 27.5 73.5SAU0092125 Rear-set ER25 Universal H75 Standard Universal ER25 1:1 6000 X 42.16 73.5SAU0092225 Rear-set ER25 Universal H75 Coolant

Thru*Universal ER25 1:1 6000 X X 42.16 83.5

SAU0092325 Rear-set ER25A Universal H75Standard

Universal ER25A 1:1 6000 X 28.5 73.5SAU0092425 Rear-set ER25A Universal H75 Coolant

Thru*Universal ER25A 1:1 6000 X X 28.5 83.5

SAU0092516 Rear-set Weldon 16 Universal H75Standard

Universal Weldon 16 1:1 6000 X 27.5 73.5





ExtCoolant

A1 A2 BSAU0130120 Rear-set ER20 RH H85 Standard Right ER20 1:1 6000 X 41.16 73.5SAU0130125 Rear-set ER25 RH H85 Standard Right ER25 1:1 6000 X 42.16 73.5SAU0130225 Rear-set ER25 RH H85 Coolant Thru* Right ER25 1:1 6000 X X 42.16 83.5SAU0130325 Rear-set ER25A RH H85 Standard Right ER25A 1:1 6000 X 28.5 73.5SAU0130425 Rear-set ER25A RH H85 Coolant Thru* Right ER25A 1:1 6000 X X 28.5 83.5SAU0130516 Rear-set Weldon 16 RH H85 Standard Right Weldon 16 1:1 6000 X 27.5 73.5SAU0131120 Rear-set ER20 LH H85 Standard Left ER20 1:1 6000 X 41.16 73.5SAU0131225 Rear-set ER25 LH H85 Coolant Thru* Left ER25 1:1 6000 X X 42.16 83.5SAU0131125 Rear-set ER25 LH H85 Standard Left ER25 1:1 6000 X 42.16 73.5SAU0131325 Rear-set ER25A LH H85 Standard Left ER25A 1:1 6000 X 28.5 73.5SAU0131425 Rear-set ER25A LH H85 Coolant Thru* Left ER25A 1:1 6000 X X 28.5 83.5SAU0131516 Rear-set Weldon 16 LH H85 Standard Left Weldon 16 1:1 6000 X 27.5 73.5SAU0132120 Rear-set ER20 Universal H85 Standard Universal ER20 1:1 6000 X 41.16 73.5SAU0132125 Rear-set ER25 Universal H85 Standard Universal ER25 1:1 6000 X 42.16 73.5SAU0132225 Rear-set ER25 Universal H85 Coolant











ExtCoolant

A1 A2 BSAU0140125 Rear-set ER25 RH H100 Standard Right ER25 1:1 6000 X 42.16 73.5SAU0140225 Rear-set ER25 RH H100 Coolant Thru* Right ER25 1:1 6000 X X 42.16 83.5SAU0140325 Rear-set ER25A RH H100 Standard Right ER25A 1:1 6000 X 28.5 73.5SAU0140425 Rear-set ER25A RH H100 Coolant Thru* Right ER25A 1:1 6000 X X 28.5 83.5SAU0140516 Rear-set Weldon 16 RH H100 Standard Right Weldon 16 1:1 6000 X 27.5 73.5SAU0141125 Rear-set ER25 LH H100 Standard Left ER25 1:1 6000 X 42.16 73.5SAU0141225 Rear-set ER25 LH H100 Coolant Thru* Left ER25 1:1 6000 X X 42.16 83.5SAU0141325 Rear-set ER25A LH H100 Standard Left ER25A 1:1 6000 X 28.5 73.5SAU0141425 Rear-set ER25A LH H100 Coolant Thru* Left ER25A 1:1 6000 X X 28.5 83.5SAU0141516 Rear-set Weldon 16 LH H100 Standard Left Weldon 16 1:1 6000 X 27.5 73.5SAU0142125 Rear-set ER25 Universal H100 Standard Universal ER25 1:1 6000 X 42.16 73.5SAU0142225 Rear-set ER25 Universal H100 Coolant









VDI30 DIN 5480DRIVENOPPOSITE FACE RADIAL DRIVEN TOOL VDI30 DIN 5480 H-85

PartNumber Description Orient. Spindle I RPM Ext CoolantSAU0110225 Opposite Face ER25+ER25 RH H85 Right ER25+ER25 1:1 6000 XSAU0111225 Opposite Face ER25+ER25 LH H85 Left ER25+ER25 1:1 6000 X

OPPOSITE FACE RADIAL TWIN DRIVEN TOOL VDI30 DIN 5480 H-100

PartNumber Description Spindle I RPM Ext CoolantSAU0360225 Opposite Face Radial Twin RH Driven H=100 ER25-ER25 1:1 6000 XSAU0361225 Opposite Face Radial Twin LH Driven H=100 ER25-ER25 1:1 6000 X

GEAR HOBBER VDI30 DIN 5480

PartNumber Description I RPM Ext Coolant D mm D InchSAU0021100 Gear Hobber 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0022100 Gear Hobber 2:1 2:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"





ExtCoolant

A202SAU_A32_40D00 Axial ER32 Standard ER32 1:1 4000 X 107.26202SAU_A32_40D10 Axial ER32 Standard Coolant Thru* ER32 1:1 4000 X X 110.46

AXIAL REDIRECTED DRIVEN TOOL VDI40 DIN 5482


ExtCoolant

A205SAU_A32_40D00 Axial Redirected ER32 Standard ER32 1:1 4000 X 144.46205SAU_A32_40D10 Axial Redirected ER32 Coolant Thru* ER32 1:1 4000 X 164.96



VDI40 DIN 5482DRIVENAXIAL GEARED DOWN REDIRECTED DRIVEN TOOL VDI40 DIN 5482


ExtCoolant

A205SAU_A32_40D20 Axial Geared Down Redirected ER32 Standard ER32 2:1 2000 X 144.46205SAU_A32_40D30 Axial Geared Down Redirected ER32 Coolant

Thru*ER32 2:1 2000 X 164.96

AXIAL GEARED-UP I=1:2 DRIVEN TOOL RE-DIRECTED B Y 42mm VDI40 Please call for pricing

PartNumber Description Spindle I RPM Coolant Thru Ext. CoolantSAU0446132 Axial Geared-Up Re-Directed ERA32 RH ERA32 1:2 8000 XSAU0446232 Axial Geared-Up Re-Directed ERA32 RH Coolant

Thru*ERA32 1:2 8000 X X

SAU0447132 Axial Geared-Up Re-Directed ERA32 LH ERA32 1:2 8000 XSAU0447232 Axial Geared-Up Re-Directed ERA32 LH Coolant

Thru*ERA32 1:2 8000 X X





201SAU_R32_40D00 Rear-Set ER32 RH H85 Standard Right ER32 1:1 4000 X201SAU_R32_40D20 Rear-Set ER32 LH H85 Standard Left ER32 1:1 4000 X

0-90 ADJUSTABLE ANGLE VDI40 DIN 5482


A A1 D L0210020_SAU 0-90 Adj Angle ER20 Right ER20 1:1 4000 X 84.160210025_SAU 0-90 Adj Angle ER25 Right ER25 1:1 4000 X 85.660211617_SAU 0-90 Adj Angle Mill Head D=16, L=17 Right 16x17 1:1 4000 X 65 16 170212219_SAU 0-90 Adj Angle Mill Head D=22, L=19 Right 22x19 1:1 4000 X 66 22 190211905_SAU 0-90 Adj Angle Mill Head D=3/4", L=3/4" Right 3/4x3/4 1:1 4000 X 65 3/4" 3/4"



VDI40 DIN 5482DRIVENGEAR HOBBER VDI40 DIN 5482

PartNumber Description I RPM ExtCoolant

D mm D InchSAU0331100 Gear Hobber 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0332100 Gear Hobber 2:1 2:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"





ExtCoolant

A1 A2 A3 D LSAU0240125 Axial ER25 Standard ER25 1:1 4000 X 107.46SAU0241125 Axial ER25 Coolant Thru* ER25 1:1 4000 X X 107.46212SAUA32_40D00 Axial ER32 Standard ER32 1:1 4000 X 110.46212SAUA32_40D10 Axial ER32 Coolant Thru* ER32 1:1 4000 X X 110.46SAU0240422 Axial Mill Head D=22, L=19 Standard 22x19 1:1 4000 X 96.8 22 19SAU0240320 Axial Weldon 20 Standard Weldon 20 1:1 4000 X 106.3SAU0241320 Axial Weldon 20 Coolant Thru* Weldon 20 1:1 4000 X X 106.3SAU0240525 Axial Weldon 25 Standard Weldon 25 1:1 4000 X 106.3SAU0241525 Axial Weldon 25 Coolant Thru* Weldon 25 1:1 4000 X X 106.3

AXIAL GEARED DOWN I=2:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480


Reversible A A1 A2SAU0120125 Axial Geared Down 2:1 Redirected

ER25 StandardUniversal ER25 2:1 3000 X X 124.33

SAU0120232 Axial Geared Down 2:1 RedirectedER32 Standard

Universal ER32 2:1 3000 X X 131.53SAU0120140 Axial Geared Down 2:1 Redirected


SAU0120322 Axial Geared Down 2:1 Redirected MillHead D22, L19

Universal 22x19 2:1 3000 X X 116SAU0120425 Axial Geared Down 2:1 Redirected

Weldon 25Universal Weldon 25 2:1 3000 X X 137



VDI40 DIN 5480DRIVENAXIAL GEARED DOWN I=3:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480


Reversible A A1 A2SAU0121125 Axial Geared Down 3:1 Redirected


SAU0121232 Axial Geared Down 3:1 RedirectedER32 Standard

Universal ER32 3:1 3000 X X 131.53SAU0121140 Axial Geared Down 3:1 Redirected


SAU0121322 Axial Geared Down 3:1 Redirected MillHead D22, L19

Universal 22x19 3:1 3000 X X 116SAU0121425 Axial Geared Down 3:1 Redirected

Weldon 25Universal Weldon 25 3:1 3000 X X 137

AXIAL GEARED UP 1=1:2 REDIRECTED DRIVEN TOOL VDI40 DIN 5480


ReversibleSAU0120525 Axial Geared Up 1:2 Redirected ER25A

StandardUniversal ER25A 1:2 12000 X X



VDI40 DIN 5480DRIVENRADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y VDI40 DIN5480Please call for pricing

PartNumber Description Spindle I RPM Ext. Coolant ASAU0450216 Radial RH Single Side Twin Head ER16 ER16 1:1 6000 X 102SAU0450225 Radial RH Single Side Twin Head ER25 ER25 1:1 6000 X 102.96SAU0451216 Radial LH Single Side Twin Head ER16 ER16 1:1 6000 X 102SAU0451225 Radial LH Single Side Twin Head ER25 ER25 1:1 6000 X 102.96

RADIAL DRIVEN TOOL VDI40 DIN 5480 H-70


ExtCoolant

A1 B215SAU_R32_40D00 Radial RH H70 ER32 Standard Right ER32 1:1 6000 X 58.5215SAU_R32_40D10 Radial RH H70 ER32 Coolant Thru* Right ER32 1:1 6000 X X 82215SAU_R22_40D00 Radial RH H70 Mill Head D=22, L=19 Right 22x19 1:1 6000 X 78.5 58.5215SAU_R27_40D00 Radial RH H70 Mill Head D=27, L=21 Right 27x21 1:1 6000 X 78.5 58.5215SAU_R32_40D20 Radial LH H70 ER32 Standard Left ER32 1:1 6000 X 58.5215SAU_R32_40D30 Radial LH H70 ER32 Coolant Thru* Left ER32 1:1 6000 X X 82215SAU_R22_40D10 Radial LH H70 Mill Head D=22, L=19 Left 22x19 1:1 6000 X 78.5 58.5215SAU_R27_40D10 Radial LH H70 Mill Head D=27, L=21 Left 27x21 1:1 6000 X 78.5 58.5



VDI40 DIN 5480DRIVENRADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-70See ACCESSORIES for MTSK Clamping Units

PartNumber Description Spindle I RPM Ext CoolantSAU0410140 Radial RH MTSK40 H=70 MTSK-40 1:1 6000 XSAU0411140 Radial LH MTSK40 H=70 MTSK-40 1:1 6000 X

RADIAL DRIVEN TOOL VDI40 DIN 5480 H-100


ExtCoolant

A1 B213SAU_R32_40D00 Radial RH H100 ER32 Standard Right ER32 1:1 4000 X 58.5213SAU_R32_40D10 Radial RH H100 ER32 Coolant Thru* Right ER32 1:1 4000 X X 82213SAU_R22_40D00 Radial RH H100 Mill Head D=22, L=19 Right 22x19 1:1 4000 X 78.5 58.5213SAU_R27_40D00 Radial RH H100 Mill Head D=27, L=21 Right 27x21 1:1 4000 X 78.5 58.5



VDI40 DIN 5480DRIVENRADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-100See ACCESSORIES for MTSK Clamping Units

PartNumber Description Spindle I RPM Ext. CoolantSAU0420140 Radial RH MTSK40 H=100 MTSK-40 1:1 6000 X

RADIAL GEARED UP 1:3 DRIVEN TOOL VDI40 DIN 5480

PartNumber Description Spindle RPM Coolant Thru Ext. Coolant BSAU0310125 Radial Geared-Up 1:3 ER25 ER25 12000 X 93.5SAU0310225 Radial Geared-Up 1:3 ER25 Coolant Thru* ER25 12000 X X 101.5



VDI40 DIN 5480DRIVENRADIAL DRIVEN TOOL VDI40 DIN 5480 H-130


ExtCoolant

A1 B213SAU_R32_40D20 Radial RH H130 ER32 Standard Right ER32 1:1 6000 X 58.5213SAU_R32_40D40 Radial RH H130 ER32 Coolant Thru* Right ER32 1:1 6000 X X 82213SAU_R22_40D20 Radial RH H130 Mill Head D=22, L=19 Right 22x19 1:1 6000 X 78.5 58.5213SAU_R27_40D20 Radial RH H130 Mill Head D=27, L=21 Right 27x21 1:1 6000 X 78.5 58.5213SAU_R32_40D30 Radial LH H130 ER32 Standard Left ER32 1:1 6000 X 58.5213SAU_R32_40D50 Radial LH H130 ER32 Coolant Thru* Left ER32 1:1 6000 X X 82213SAU_R22_40D30 Radial LH H130 Mill Head D=22, L=19 Left 22x19 1:1 6000 X 78.5 58.5213SAU_R27_40D30 Radial LH H130 Mill Head D=27, L=21 Left 27x21 1:1 6000 X 78.5 58.5

RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-130See ACCESSORIES for MTSK Clamping Units

PartNumber Description Spindle I RPM Ext. CoolantSAU0430140 Radial RH MTSK40 H=130 MTSK-40 1:1 6000 XSAU0431140 Radial LH MTSK40 H=130 MTSK-40 1:1 6000 X



VDI40 DIN 5480DRIVENRADIAL REAR SET DRIVEN TOOL VDI40 DIN 5480 H-85


SAU0060132 Radial Rear Set H85 ER32 Standard Right ER32 1:1 6000 X

RADIAL REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100


ExtCoolant

A1 BSAU0150125 Rear-set ER25 RH H100 Standard Right ER25 1:1 6000 X 42.66 95SAU0150225 Rear-set ER25 RH H100 Coolant Thru* Right ER25 1:1 6000 X X 42.66 108.5SAU0150132 Rear-set ER32 RH H100 Standard Right ER32 1:1 6000 X 45.66 95SAU0150232 Rear-set ER32 RH H100 Coolant Thru* Right ER32 1:1 6000 X X 45.66 108.5SAU0151125 Rear-set ER25 LH H100 Standard Left ER25 1:1 6000 X 42.66 95SAU0151225 Rear-set ER25 LH H100 Coolant Thru* Left ER25 1:1 6000 X X 42.66 108.5SAU0151132 Rear-set ER32 LH H100 Standard Left ER32 1:1 6000 X 45.66 95SAU0151232 Rear-set ER32 LH H100 Coolant Thru* Left ER32 1:1 6000 X X 45.66 108.5SAU0152125 Rear-set ER25 Universal H100 Standard Universal ER25 1:1 6000 X 42.66 95SAU0152225 Rear-set ER25 Universal H100 Coolant


SAU0152132 Rear-set ER32 Universal H100 Standard Universal ER32 1:1 6000 X 45.66 95SAU0152232 Rear-set ER32 Universal H100 Coolant




VDI40 DIN 5480DRIVENRADIAL GEARED DOWN 2:1 REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100


ExtCoolant

A1 BSAU0150325 Rear-set Geared Down 2:1 ER25 RH H100

StandardRight ER25 2:1 3000 X 42.66 95

SAU0150425 Rear-set Geared Down 2:1 ER25 RH H100Coolant Thru*

Right ER25 2:1 3000 X X 42.66 108.5SAU0150332 Rear-set Geared Down 2:1 ER32 RH H100


SAU0150432 Rear-set Geared Down 2:1 ER32 RH H100Coolant Thru*

Right ER32 2:1 3000 X X 45.66 108.5SAU0151325 Rear-set Geared Down 2:1 ER25 LH H100

StandardLeft ER25 2:1 3000 X 42.66 95

SAU0151425 Rear-set Geared Down 2:1 ER25 LH H100Coolant Thru*

Left ER25 2:1 3000 X X 42.66 108.5SAU0151332 Rear-set Geared Down 2:1 ER32 LH H100


SAU0151432 Rear-set Geared Down 2:1 ER32 LH H100Coolant Thru*

Left ER32 2:1 3000 X X 45.66 108.5SAU0152325 Rear-set Geared Down 2:1 ER25

Universal H100 StandardUniversal ER25 2:1 3000 X 42.66 95

SAU0152425 Rear-set Geared Down 2:1 ER25Universal H100 Coolant Thru*

Universal ER25 2:1 3000 X X 42.66 108.5SAU0152332 Rear-set Geared Down 2:1 ER32

Universal H100 StandardUniversal ER32 2:1 3000 X 45.66 95

SAU0152432 Rear-set Geared Down 2:1 ER32Universal H100 Coolant Thru*

Universal ER32 2:1 3000 X X 45.66 108.5



VDI40 DIN 5480DRIVENRADIAL GEARED UP 1:2 REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100


ExtCoolant

A1 BSAU0150525 Rear-set Geared Up 1:2 ER25 RH H100


SAU0150625 Rear-set Geared Up 1:2 ER25 RH H100Coolant Thru*

Right ER25 1:2 12000 X X 42.66 108.5SAU0150532 Rear-set Geared Up 1:2 ER32 RH H100


SAU0150632 Rear-set Geared Up 1:2 ER32 RH H100Coolant Thru*

Right ER32 1:2 12000 X X 45.66 108.5SAU0151525 Rear-set Geared Up 1:2 ER25 LH H100


SAU0151625 Rear-set Geared Up 1:2 ER25 LH H100Coolant Thru*

Left ER25 1:2 12000 X X 42.66 108.5SAU0151532 Rear-set Geared Up 1:2 ER32 LH H100


SAU0151632 Rear-set Geared Up 1:2 ER32 LH H100Coolant Thru*

Left ER32 1:2 12000 X X 45.66 108.5SAU0152525 Rear-set Geared Up 1:2 ER25 Universal

H100 StandardUniversal ER25 1:2 12000 X 42.66 95

SAU0152625 Rear-set Geared Up 1:2 ER25 UniversalH100 Coolant Thru*

Universal ER25 1:2 12000 X X 42.66 108.5SAU0152532 Rear-set Geared Up 1:2 ER32 Universal

H100 StandardUniversal ER32 1:2 12000 X 45.66 95

SAU0152632 Rear-set Geared Up 1:2 ER32 UniversalH100 Coolant Thru*

Universal ER32 1:2 12000 X X 45.66 108.5



VDI40 DIN 5480DRIVENOPPOSITE FACE RADIAL DRIVEN TOOL VDI40 DIN 5480


H216SAU_A32_40D00 Opposite Face ER32+ER32 RH H70 Right ER32+ER32 1:1 6000 X 70216SAU_A32_40D10 Opposite Face ER32+ER32 LH H70 Left ER32+ER32 1:1 6000 X 70SAU0030232 Opposite Face ER32+ER32 RH H100 Right ER32+ER32 1:1 6000 X 100

GEAR HOBBER OFF-SET VDI40 DIN 5480

PartNumber Description Orient. I RPM ExtCoolant

D mm D InchSAU0011140 Gear Hobber 1:1 Right 1:1 4000 X 16-22-27-32 3/4"-1"- 1 1/4"SAU0012140 Gear Hobber 2:1 Right 2:1 2000 X 16-22-27-32 3/4"-1"- 1 1/4"




PartNumber Description I RPM Ext.Coolant

D (mm) D (Inch)SAU0051100 Gear Hobber RH 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0051110 Gear Hobber LH 1:1 6000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0052100 Gear Hobber RH 2:1 1:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0052110 Gear Hobber LH 2:1 1:1 3000 X 16-22-27-32 3/4"-1"-1 1/4"



VDI50 DIN 5482DRIVENAXIAL REDIRECTED DRIVEN TOOL VDI50 DIN 5482


245SAU_A40_50D00 Redirected ER40 Standard Right ER40 1:1 4000 X

RADIAL REAR-SET DRIVEN TOOL VDI50 DIN 5482 H-100


241SAU_R40_50D00 Rear-set ER40 H100 RH Right ER40 1:1 4000 X241SAU_R40_50D20 Rear-set ER40 H100 LH Left ER40 1:1 4000 X




PartNumber Description I RPM Ext.Coolant

D (mm) D (Inch)SAU0371100 Gear Hobber RH 1:1 4000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0371110 Gear Hobber LH 1:1 4000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0372100 Gear Hobber RH 2:1 1:1 2000 X 16-22-27-32 3/4"-1"-1 1/4"SAU0372110 Gear Hobber LH 2:1 1:1 2000 X 16-22-27-32 3/4"-1"-1 1/4"



ACCESSORIESDRIVENMTSK-40 QUICK CHANGE TOOLHOLDER CLAMP CHART

PartNumber Description Spindle Dimensions A D LMTSK40A02 ER32 MTSK-40 ER32 35.6MTSK40A03 ER25 MTSK-40 ER25 32.6MTSK40B02 ERA25 MTSK-40 ERA25 16MTSK40B03 ERA20 MTSK-40 ERA20 14MTSK40C03 3/4"x3/4" MTSK-40 3/4"x3/4" Inch 15.5 3/4" 3/4"MTSK40C02 16x17 MTSK-40 16x17 mm 15 16 17MTSK40C04 22x19 MTSK-40 22x19 mm 17 22 19MTSK40C05 27x21 MTSK-40 27x21 mm 22 27 21MTSK40D01 Weldon 6 Weldon 6 8MTSK40D02 Weldon 8 Weldon 8 8MTSK40D03 Weldon 10 Weldon 10 9MTSK40D04 Weldon 12 Weldon 12 14MTSK40D06 Weldon 16 Weldon 12 39.5MTSK40D07 Weldon 20 Weldon 20 39.5MTSK40D11 Weldon 1/4" Weldon 1/4" 8MTSK40D12 Weldon 5/16" Weldon 5/16" 8MTSK40D13 Weldon 3/8" Weldon 3/8" 9MTSK40D14 Weldon 1/2" Weldon 1/2" 14



ER

COLL

ETS

: SET

S A

ND

IND

IVID

UA

L .

0002

" A

CCU

RACY

INCH

SIZE

SER

16St

anda

rdER

16Co

olan

tER

20St

anda

rdER

20Co

olan

tER

25St

anda

rdER

25Co

olan

tER

32St

anda

rdER

32Co

olan

tER

40St

anda

rdER

40Co

olan

t

3/6

4ER

16-0

01ER

20-0

01ER

25-0

01ER

32-0

01ER

40-0

01 1

/16

ER16

-002

ER20

-002

ER25

-002

ER32

-002

ER40

-002

5/6

4ER

16-0

03ER

20-0

03ER

25-0

03ER

32-0

03ER

40-0

03 3

/32

ER16

-004

ER20

-004

ER25

-004

ER32

-004

ER40

-004

7/6

4ER

16-0

05ER

20-0

05ER

25-0

05ER

32-0

05ER

40-0

05 1

/8ER

16-0

06ER

X16-

001

ER20

-006

ER20

X-00

1ER

25-0

06ER

25X-

001

ER32

-006

ER32

X-00

1ER

40-0

06 9

/64

ER16

-007

ERX1

6-00

2ER

20-0

07ER

25-0

07ER

32-0

07ER

40-0

07 5

/32

ER16

-008

ERX1

6-00

3ER

20-0

08ER

20X-

002

ER25

-008

ER25

X-00

2ER

32-0

08ER

32X-

002

ER40

-008

ERX4

0-00

1 1

1/64

ER16

-009

ERX1

6-00

4ER

20-0

09ER

25-0

09ER

32-0

09ER

40-0

09 3

/16

ER16

-010

ERX1

6-00

5ER

20-0

10ER

20X-

003

ER25

-010

ER25

X-00

3ER

32-0

10ER

32X-

003

ER40

-010

ERX4

0-00

2 1

3/64

ER16

-011

ERX1

6-00

6ER

20-0

11ER

25-0

11ER

32-0

11ER

40-0

11 7

/32

ER16

-012

ERX1

6-00

7ER

20-0

12ER

20X-

004

ER25

-012

ER25

X-00

4ER

32-0

12ER

32X-

004

ER40

-012

ERX4

0-00

3 1

5/64

ER16

-013

ERX1

6-00

8ER

20-0

13ER

25-0

13ER

32-0

13ER

40-0

13 1

/4ER

16-0

14ER

X16-

009

ER20

-014

ER20

X-00

5ER

25-0

14ER

25X-

005

ER32

-014

ER32

X-00

5ER

40-0

14ER

X40-

004

17/

64ER

16-0

15ER

X16-

010

ER20

-015

ER25

-015

ER32

-015

ER40

-015

9/3

2ER

16-0

16ER

X16-

011

ER20

-016

ER20

X-00

6ER

25-0

16ER

25X-

006

ER32

-016

ER32

X-00

6ER

40-0

16ER

X40-

005

19/

64ER

16-0

17ER

X16-

012

ER20

-017

ER25

-017

ER32

-017

ER40

-017

5/1

6ER

16-0

18ER

X16-

013

ER20

-018

ER20

X-00

7ER

25-0

18ER

25X-

007

ER32

-018

ER32

X-00

7ER

40-0

18ER

X40-

006

21/

64ER

16-0

19ER

X16-

014

ER20

-019

ER25

-019

ER32

-019

ER40

-019

11/

32ER

16-0

20ER

X16-

015

ER20

-020

ER20

-008

ER25

-020

ER25

X-00

8ER

32-0

20ER

32X-

008

ER40

-020

ERX4

0-00

7 2

3/64

ER16

-021

ERX1

6-01

6ER

20-0

21ER

25-0

21ER

32-0

21ER

40-0

21 3

/8ER

16-0

22ER

X16-

017

ER20

-022

ER20

-009

ER25

-022

ER25

X-00

9ER

32-0

22ER

32X-

009

ER40

-022

ERX4

0-00

8 2

5/64

ER16

-023

ERX1

6-01

8ER

20-0

23ER

25-0

23ER

32-0

23ER

40-0

23 1

3/32

ER20

-024

ER20

X-01

0ER

25-0

24ER

25X-

010

ER32

-024

ER32

X-01

0ER

40-0

24ER

X40-

009

27/

64ER

20-0

25ER

25-0

25ER

32-0

25ER

40-0

25 7

/16

ER20

-026

ER20

X-01

1ER

25-0

26ER

25X-

011

ER32

-026

ER32

X-01

1ER

40-0

26ER

X40-

010

29/

64ER

20-0

27ER

25-0

27ER

32-0

27ER

40-0

27 1

5/32

ER20

-028

ER20

X-01

2ER

25-0

28ER

25X-

012

ER32

-028

ER32

X-01

2ER

40-0

28ER

X40-

011

31/

64ER

20-0

29ER

25-0

29ER

32-0

29ER

40-0

29 1

/2ER

20-0

30ER

20X-

013

ER25

-030

ER25

X-01

3ER

32-0

30ER

32X-

013

ER40

-030

ERX4

0-01

2 3

3/64

ER25

-031

ER32

-031

ER40

-031

INCH

SIZE

SER

16St

anda

rdER

16Co

olan

tER

20St

anda

rdER

20Co

olan

tER

25St

anda

rdER

25Co

olan

tER

32St

anda

rdER

32Co

olan

tER

40St

anda

rdER

40Co

olan

t

17/

32ER

25-0

32ER

25X-

014

ER32

-032

ER32

X-01

4ER

40-0

32ER

X40-

013

35/

64ER

25-0

33ER

32-0

33ER

40-0

33 9

/16

ER25

-034

ER25

X-01

5ER

32-0

34ER

32X-

015

ER40

-034

ERX4

0-01

4 3

7/64

ER25

-035

ER32

-035

ER40

-035

19/

32ER

25-0

36ER

25X-

016

ER32

-036

ER32

X-01

6ER

40-0

36ER

X40-

015

39/

64ER

25-0

37ER

32-0

37ER

40-0

37 5

/8ER

25-0

38ER

25X-

017

ER32

-038

ER32

X-01

7ER

40-0

38ER

X40-

016

41/

64ER

32-0

39ER

40-0

39 2

1/32

ER32

-040

ER32

X-01

8ER

40-0

40ER

X40-

017

43/

64ER

32-0

41ER

40-0

41 1

1/16

ER32

-042

ER32

X-01

9ER

40-0

42ER

X40-

018

45/

64ER

32-0

43ER

40-0

43 2

3/32

ER32

-044

ER32

X-02

0ER

40-0

44ER

X40-

019

47/

64ER

32-0

45ER

40-0

45 3

/4ER

32-0

46ER

32X-

021

ER40

-046

ERX4

0-02

0 4

9/64

ER32

-047

ER40

-047

25/

32ER

32-0

48ER

32X-

022

ER40

-048

ERX4

0-02

1 5

1/64

ER32

-049

ER40

-049

13/

16ER

32-0

50ER

40-0

50ER

X40-

022

53/

64ER

40-0

51 2

7/32

ER40

-052

ERX4

0-02

3 5

5/64

ER40

-053

7/8

ER40

-054

ERX4

0-02

4 5

7/64

ER40

-055

29/

32ER

40-0

56ER

X40-

025

59/

64ER

40-0

57 1

5/16

ER40

-058

ERX4

0-02

6 6

1/64

ER40

-059

31/

32ER

40-0

60ER

X40-

027

63/

64ER

40-0

61 1

"ER

40-0

62ER

X40-

028

1-1

/64

ER40

-063

SET

ER16

-SET

ERX1

6-SE

TER

20-S

ETER

X20-

SET

ER25

-SET

ERX2

5-SE

TER

32-S

ETER

X32-

SET

ER40

-SET

ERX4

0-SE

T

ER COLLETS

ER COLLET NUMBER DESCRIPTION MD LIST PRICE

ER16-001 thru ER16-023 ER16 Collet 15.00$ ER16-SET ER16 Collet Set (11 Collets) 150.00$

ERX16-001 thru ERX16-018 ER16 Sealed Collet 25.00$ ERX16-SET ER16 Sealed Collet Set (9 Collets) 220.00$









LIVE TOOL WRENCHES

ER COLLET NUMBER DESCRIPTION MD LIST PRICE

From Catalog Above ER Collet Wrench (Identify Holder) 22.00$

From Catalog AboveSpindle Locking Wrench

(Identify Holder) 22.00$

00-90 ADJUSTABLE ANGLE VDI40 DIN 5482 15

AACCESSORIES 30AXIAL DRIVEN TOOL VDI30 DIN 5480 5AXIAL DRIVEN TOOL VDI30 DIN 5482 1AXIAL DRIVEN TOOL VDI40 DIN 5480 17AXIAL DRIVEN TOOL VDI40 DIN 5482 13AXIAL GEARED DOWN I=2:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 17AXIAL GEARED DOWN I=3:1 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 18AXIAL GEARED DOWN REDIRECTED DRIVEN TOOL VDI40 DIN 5482 14AXIAL GEARED UP 1=1:2 REDIRECTED DRIVEN TOOL VDI40 DIN 5480 18AXIAL GEARED-UP I=1:2 DRIVEN TOOL RE-DIRECTED B Y 42mm VDI40 14AXIAL REDIRECTED DRIVEN TOOL VDI40 DIN 5482 13AXIAL REDIRECTED DRIVEN TOOL VDI50 DIN 5482 28

DDRIVEN 1-30

GGEAR HOBBER OFF-SET VDI40 DIN 5480 26GEAR HOBBER VDI30 DIN 5480 12GEAR HOBBER VDI40 DIN 5480 27GEAR HOBBER VDI40 DIN 5482 16GEAR HOBBER VDI50 DIN 5482 29GEARED DOWN AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480 5GEARED UP AXIAL REDIRECTED DRIVEN TOOL VDI30 DIN 5480 6

MMTSK-40 QUICK CHANGE TOOLHOLDER CLAMP CHART 30

OOPPOSITE FACE RADIAL DRIVEN TOOL VDI30 DIN 5480 H-85 12OPPOSITE FACE RADIAL DRIVEN TOOL VDI40 DIN 5480 26OPPOSITE FACE RADIAL TWIN DRIVEN TOOL VDI30 DIN 5480 H-100 12

PPlease call for pricing 14, 19

RRADIAL DRIVEN TOOL VDI30 DIN 5480 H=100 7RADIAL DRIVEN TOOL VDI30 DIN 5480 H=85 6RADIAL DRIVEN TOOL VDI30 DIN 5482 2RADIAL DRIVEN TOOL VDI40 DIN 5480 H-100 20RADIAL DRIVEN TOOL VDI40 DIN 5480 H-130 22RADIAL DRIVEN TOOL VDI40 DIN 5480 H-70 19RADIAL GEARED DOWN 2:1 REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100 24RADIAL GEARED UP 1:2 DRIVEN TOOL VDI30 DIN 5480 8RADIAL GEARED UP 1:2 REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100 25RADIAL GEARED UP 1:3 DRIVEN TOOL VDI40 DIN 5480 21RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-100 21RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-130 22RADIAL MTSK DRIVEN TOOL VDI40 DIN 5480 H-70 20RADIAL REAR SET DRIVEN TOOL VDI40 DIN 5480 H-85 23RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-100 11RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-75 9RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5480 H-85 10RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5482 H-75 3RADIAL REAR-SET DRIVEN TOOL VDI30 DIN 5482 H-85 4RADIAL REAR-SET DRIVEN TOOL VDI40 DIN 5480 H-100 23RADIAL REAR-SET DRIVEN TOOL VDI40 DIN 5482 H-85 15RADIAL REAR-SET DRIVEN TOOL VDI50 DIN 5482 H-100 28RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y VDI40 DIN5480 19

SSee ACCESSORIES for MTSK Clamping Units 20-22

VDI30 DIN 5482 1-4VDI40 DIN 5480 17-27VDI40 DIN 5482 13-16VDI50 DIN 5482 28-29

VVDI30 DIN 5480 5-12

Table of ContentsAlphabetized Listing

0150210020_SAU 0-90 Adj Angle ER20150210025_SAU 0-90 Adj Angle ER25150211617_SAU 0-90 Adj Angle Mill Head D=16, L=17150211905_SAU 0-90 Adj Angle Mill Head D=3/4", L=3/4"150212219_SAU 0-90 Adj Angle Mill Head D=22, L=19

215201SAU_R32_40D00 Rear-Set ER32 RH H85 Standard15201SAU_R32_40D20 Rear-Set ER32 LH H85 Standard13202SAU_A32_40D00 Axial ER32 Standard13202SAU_A32_40D10 Axial ER32 Standard Coolant Thru*13205SAU_A32_40D00 Axial Redirected ER32 Standard13205SAU_A32_40D10 Axial Redirected ER32 Coolant Thru*14205SAU_A32_40D20 Axial Geared Down Redirected ER32 Standard14205SAU_A32_40D30 Axial Geared Down Redirected ER32 Coolant Thru*17212SAUA32_40D00 Axial ER32 Standard17212SAUA32_40D10 Axial ER32 Coolant Thru*20213SAU_R22_40D00 Radial RH H100 Mill Head D=22, L=1922213SAU_R22_40D20 Radial RH H130 Mill Head D=22, L=1922213SAU_R22_40D30 Radial LH H130 Mill Head D=22, L=1920213SAU_R27_40D00 Radial RH H100 Mill Head D=27, L=2122213SAU_R27_40D20 Radial RH H130 Mill Head D=27, L=2122213SAU_R27_40D30 Radial LH H130 Mill Head D=27, L=2120213SAU_R32_40D00 Radial RH H100 ER32 Standard20213SAU_R32_40D10 Radial RH H100 ER32 Coolant Thru*22213SAU_R32_40D20 Radial RH H130 ER32 Standard22213SAU_R32_40D30 Radial LH H130 ER32 Standard22213SAU_R32_40D40 Radial RH H130 ER32 Coolant Thru*22213SAU_R32_40D50 Radial LH H130 ER32 Coolant Thru*19215SAU_R22_40D00 Radial RH H70 Mill Head D=22, L=1919215SAU_R22_40D10 Radial LH H70 Mill Head D=22, L=1919215SAU_R27_40D00 Radial RH H70 Mill Head D=27, L=2119215SAU_R27_40D10 Radial LH H70 Mill Head D=27, L=2119215SAU_R32_40D00 Radial RH H70 ER32 Standard19215SAU_R32_40D10 Radial RH H70 ER32 Coolant Thru*19215SAU_R32_40D20 Radial LH H70 ER32 Standard19215SAU_R32_40D30 Radial LH H70 ER32 Coolant Thru*26216SAU_A32_40D00 Opposite Face ER32+ER32 RH H7026216SAU_A32_40D10 Opposite Face ER32+ER32 LH H7028241SAU_R40_50D00 Rear-set ER40 H100 RH28241SAU_R40_50D20 Rear-set ER40 H100 LH28245SAU_A40_50D00 Redirected ER40 Standard

M30MTSK40A02 ER32 MTSK-4030MTSK40A03 ER25 MTSK-4030MTSK40B02 ERA25 MTSK-4030MTSK40B03 ERA20 MTSK-4030MTSK40C02 16x17 MTSK-4030MTSK40C03 3/4"x3/4" MTSK-4030MTSK40C04 22x19 MTSK-4030MTSK40C05 27x21 MTSK-4030MTSK40D01 Weldon 630MTSK40D02 Weldon 830MTSK40D03 Weldon 1030MTSK40D04 Weldon 1230MTSK40D06 Weldon 1630MTSK40D07 Weldon 2030MTSK40D11 Weldon 1/4"30MTSK40D12 Weldon 5/16"30MTSK40D13 Weldon 3/8"30MTSK40D14 Weldon 1/2"

S26SAU0011140 Gear Hobber 1:126SAU0012140 Gear Hobber 2:1

12SAU0021100 Gear Hobber12SAU0022100 Gear Hobber 2:126SAU0030232 Opposite Face ER32+ER32 RH H10027SAU0051100 Gear Hobber RH27SAU0051110 Gear Hobber LH27SAU0052100 Gear Hobber RH 2:127SAU0052110 Gear Hobber LH 2:123SAU0060132 Radial Rear Set H85 ER32 Standard

5SAU0070125 Axial ER25 Standard5SAU0070225 Axial ER25A Standard5SAU0070316 Axial Weldon 16 Standard5SAU0070416 Axial Milling Head D=16, L=175SAU0070422 Axial Milling Head D=22, L=195SAU0071125 Axial ER25 Coolant Thru*5SAU0071225 Axial ER25A Coolant Thru*5SAU0071316 Axial Weldon 16 Coolant Thru*6SAU0080125 Radial ER25 RH H85 Standard6SAU0080225 Radial ER25 RH H85 Coolant Thru*6SAU0080316 Radial Weldon 16 RH H75 Standard6SAU0080416 Radial Milling Head D=16, L=17 RH H856SAU0080422 Radial Milling Head D=22, L=19 RH H856SAU0081125 Radial ER25 LH H85 Standard6SAU0081225 Radial ER25 LH H85 Coolant Thru*6SAU0081316 Radial Weldon 16 LH H85 Standard6SAU0081416 Radial Milling Head D=16, L=17 LH H856SAU0081422 Radial Milling Head D=22, L=19 LH H859SAU0090125 Rear-set ER25 RH H75 Standard9SAU0090225 Rear-set ER25 RH H75 Coolant Thru*9SAU0090325 Rear-set ER25A RH H75 Standard9SAU0090425 Rear-set ER25A RH H75 Coolant Thru*9SAU0090516 Rear-set Weldon 16 RH H75 Standard9SAU0091125 Rear-set ER25 LH H75 Standard9SAU0091225 Rear-set ER25 LH H75 Coolant Thru*9SAU0091325 Rear-set ER25A LH H75 Standard9SAU0091425 Rear-set ER25A LH H75 Coolant Thru*9SAU0091516 Rear-set Weldon 16 LH H75 Standard9SAU0092125 Rear-set ER25 Universal H75 Standard9SAU0092225 Rear-set ER25 Universal H75 Coolant Thru*9SAU0092325 Rear-set ER25A Universal H75 Standard9SAU0092425 Rear-set ER25A Universal H75 Coolant Thru*9SAU0092516 Rear-set Weldon 16 Universal H75 Standard6SAU0100225 Geared Up ER25 Standard RH5SAU0100325 Geared Down ER25 Standard RH6SAU0101225 Geared Up ER25 Standard LH5SAU0101325 Geared Down ER25 Standard LH

12SAU0110225 Opposite Face ER25+ER25 RH H8512SAU0111225 Opposite Face ER25+ER25 LH H8517SAU0120125 Axial Geared Down 2:1 Redirected ER25 Standard17SAU0120140 Axial Geared Down 2:1 Redirected ER40 Standard17SAU0120232 Axial Geared Down 2:1 Redirected ER32 Standard17SAU0120322 Axial Geared Down 2:1 Redirected Mill Head D22,

L1917SAU0120425 Axial Geared Down 2:1 Redirected Weldon 2518SAU0120525 Axial Geared Up 1:2 Redirected ER25A Standard18SAU0121125 Axial Geared Down 3:1 Redirected ER25 Standard18SAU0121140 Axial Geared Down 3:1 Redirected ER32 Standard18SAU0121232 Axial Geared Down 3:1 Redirected ER32 Standard18SAU0121322 Axial Geared Down 3:1 Redirected Mill Head D22,

L1918SAU0121425 Axial Geared Down 3:1 Redirected Weldon 2510SAU0130120 Rear-set ER20 RH H85 Standard10SAU0130125 Rear-set ER25 RH H85 Standard10SAU0130225 Rear-set ER25 RH H85 Coolant Thru*10SAU0130325 Rear-set ER25A RH H85 Standard10SAU0130425 Rear-set ER25A RH H85 Coolant Thru*10SAU0130516 Rear-set Weldon 16 RH H85 Standard10SAU0131120 Rear-set ER20 LH H85 Standard

Table of ContentsPart Number Index

10SAU0131120 Rear-set ER20 LH H85 Standard10SAU0131125 Rear-set ER25 LH H85 Standard10SAU0131225 Rear-set ER25 LH H85 Coolant Thru*10SAU0131325 Rear-set ER25A LH H85 Standard10SAU0131425 Rear-set ER25A LH H85 Coolant Thru*10SAU0131516 Rear-set Weldon 16 LH H85 Standard10SAU0132120 Rear-set ER20 Universal H85 Standard10SAU0132125 Rear-set ER25 Universal H85 Standard10SAU0132225 Rear-set ER25 Universal H85 Coolant Thru*10SAU0132325 Rear-set ER25A Universal H85 Standard10SAU0132425 Rear-set ER25A Universal H85 Coolant Thru*10SAU0132516 Rear-set Weldon 16 Universal H85 Standard11SAU0140125 Rear-set ER25 RH H100 Standard11SAU0140225 Rear-set ER25 RH H100 Coolant Thru*11SAU0140325 Rear-set ER25A RH H100 Standard11SAU0140425 Rear-set ER25A RH H100 Coolant Thru*11SAU0140516 Rear-set Weldon 16 RH H100 Standard11SAU0141125 Rear-set ER25 LH H100 Standard11SAU0141225 Rear-set ER25 LH H100 Coolant Thru*11SAU0141325 Rear-set ER25A LH H100 Standard11SAU0141425 Rear-set ER25A LH H100 Coolant Thru*11SAU0141516 Rear-set Weldon 16 LH H100 Standard11SAU0142125 Rear-set ER25 Universal H100 Standard11SAU0142225 Rear-set ER25 Universal H100 Coolant Thru*11SAU0142325 Rear-set ER25A Universal H100 Standard11SAU0142425 Rear-set ER25A Universal H100 Coolant Thru*11SAU0142516 Rear-set Weldon 16 Universal H100 Standard23SAU0150125 Rear-set ER25 RH H100 Standard23SAU0150132 Rear-set ER32 RH H100 Standard23SAU0150225 Rear-set ER25 RH H100 Coolant Thru*23SAU0150232 Rear-set ER32 RH H100 Coolant Thru*24SAU0150325 Rear-set Geared Down 2:1 ER25 RH H100 Standard24SAU0150332 Rear-set Geared Down 2:1 ER32 RH H100 Standard24SAU0150425 Rear-set Geared Down 2:1 ER25 RH H100 Coolant

Thru*24SAU0150432 Rear-set Geared Down 2:1 ER32 RH H100 Coolant

Thru*25SAU0150525 Rear-set Geared Up 1:2 ER25 RH H100 Standard25SAU0150532 Rear-set Geared Up 1:2 ER32 RH H100 Standard25SAU0150625 Rear-set Geared Up 1:2 ER25 RH H100 Coolant

Thru*25SAU0150632 Rear-set Geared Up 1:2 ER32 RH H100 Coolant

Thru*23SAU0151125 Rear-set ER25 LH H100 Standard23SAU0151132 Rear-set ER32 LH H100 Standard23SAU0151225 Rear-set ER25 LH H100 Coolant Thru*23SAU0151232 Rear-set ER32 LH H100 Coolant Thru*24SAU0151325 Rear-set Geared Down 2:1 ER25 LH H100 Standard24SAU0151332 Rear-set Geared Down 2:1 ER32 LH H100 Standard24SAU0151425 Rear-set Geared Down 2:1 ER25 LH H100 Coolant

Thru*24SAU0151432 Rear-set Geared Down 2:1 ER32 LH H100 Coolant

Thru*25SAU0151525 Rear-set Geared Up 1:2 ER25 LH H100 Standard25SAU0151532 Rear-set Geared Up 1:2 ER32 LH H100 Standard25SAU0151625 Rear-set Geared Up 1:2 ER25 LH H100 Coolant

Thru*25SAU0151632 Rear-set Geared Up 1:2 ER32 LH H100 Coolant

Thru*23SAU0152125 Rear-set ER25 Universal H100 Standard23SAU0152132 Rear-set ER32 Universal H100 Standard23SAU0152225 Rear-set ER25 Universal H100 Coolant Thru*23SAU0152232 Rear-set ER32 Universal H100 Coolant Thru*24SAU0152325 Rear-set Geared Down 2:1 ER25 Universal H100

Standard24SAU0152332 Rear-set Geared Down 2:1 ER32 Universal H100

Standard24SAU0152425 Rear-set Geared Down 2:1 ER25 Universal H100

Coolant Thru*

24SAU0152432 Rear-set Geared Down 2:1 ER32 Universal H100Coolant Thru*

25SAU0152525 Rear-set Geared Up 1:2 ER25 Universal H100Standard

25SAU0152532 Rear-set Geared Up 1:2 ER32 Universal H100Standard

25SAU0152625 Rear-set Geared Up 1:2 ER25 Universal H100Coolant Thru*

25SAU0152632 Rear-set Geared Up 1:2 ER32 Universal H100Coolant Thru*

7SAU0160125 Radial ER25 RH H100 Standard7SAU0160225 Radial ER25 RH H100 Coolant Thru*7SAU0160316 Radial Weldon 16 RH H100 Standard7SAU0160416 Radial Milling Head D=16, L=17 RH H1007SAU0160422 Radial Milling Head D=22, L=19 RH H1007SAU0160422 Radial Milling Head D=22, L=19 Universal H1007SAU0161125 Radial ER25 LH H100 Standard7SAU0161225 Radial ER25 LH H100 Coolant Thru*7SAU0161316 Radial Weldon 16 LH H100 Standard7SAU0161416 Radial Milling Head D=16, L=17 LH H1007SAU0161422 Radial Milling Head D=22, L=19 LH H1007SAU0162125 Radial ER25 Universal H100 Standard7SAU0162225 Radial ER25 Universal H100 Coolant Thru*7SAU0162316 Radial Weldon Univeral H100 Standard7SAU0162416 Radial Milling Head D=16, L=17 Universal H1001SAU0170125 Axial ER25 Standard1SAU0170225 Axial ER25A Standard1SAU0170316 Axial Weldon 16 Standard1SAU0170416 Axial Milling Head D=16, L=171SAU0170422 Axial Milling Head D=22, L=191SAU0171125 Axial ER25 Coolant Thru*1SAU0171225 Axial ER25A Coolant Thru*1SAU0171316 Axial Weldon 16 Coolant Thru*2SAU0180125 Radial ER25 RH H85 Standard2SAU0180225 Radial ER25 RH H85 Coolant Thru*2SAU0180316 Radial Weldon 16 RH H85 Standard2SAU0180416 Radial Milling Head D=16, L=17 RH H852SAU0180422 Radial Milling Head D=22, L=19 RH H852SAU0181125 Radial ER25 LH H85 Standard2SAU0181225 Radial ER25 LH H85 Coolant Thru*2SAU0181316 Radial Weldon 16 LH H85 Standard2SAU0181416 Radial Milling Head D=16, L=17 LH H852SAU0181422 Radial Milling Head D=22, L=19 LH H853SAU0200120 Rear-set ER20 RH H75 Standard3SAU0200125 Rear-set ER25 RH H75 Standard3SAU0200225 Rear-set ER25 RH H75 Coolant Thru*3SAU0200325 Rear-set ER25A RH H75 Standard3SAU0200425 Rear-set ER25A RH H75 Coolant Thru*3SAU0200516 Rear-set Weldon 16 RH H75 3SAU0201120 Rear-set ER20 LH H75 Standard3SAU0201125 Rear-set ER25 LH H75 Standard3SAU0201225 Rear-set ER25 LH H75 Coolant Thru*3SAU0201325 Rear-set ER25A LH H75 Standard3SAU0201425 Rear-set ER25A LH H75 Coolant Thru*3SAU0201516 Rear-set Weldon 16 LH H754SAU0210120 Rear-set ER20 RH H85 Standard4SAU0210125 Rear-set ER25 RH H85 Standard4SAU0210225 Rear-set ER25 RH H85 Coolant Thru*4SAU0210325 Rear-set ER25A RH H85 Standard4SAU0210425 Rear-set ER25A RH H85 Coolant Thru*4SAU0210516 Rear-set Weldon 16 RH H85 Standard4SAU0211120 Rear-set ER20 LH H85 Standard4SAU0211125 Rear-set ER25 LH H85 Standard4SAU0211225 Rear-set ER25 LH H85 Coolant Thru*4SAU0211325 Rear-set ER25A LH H85 Standard4SAU0211425 Rear-set ER25A LH H85 Coolant Thru*4SAU0211516 Rear-set Weldon 16 LH H85 Standard


17SAU0240125 Axial ER25 Standard17SAU0240320 Axial Weldon 20 Standard17SAU0240422 Axial Mill Head D=22, L=19 Standard17SAU0240525 Axial Weldon 25 Standard17SAU0241125 Axial ER25 Coolant Thru*17SAU0241320 Axial Weldon 20 Coolant Thru*17SAU0241525 Axial Weldon 25 Coolant Thru*21SAU0310125 Radial Geared-Up 1:3 ER2521SAU0310225 Radial Geared-Up 1:3 ER25 Coolant Thru*16SAU0331100 Gear Hobber16SAU0332100 Gear Hobber 2:1

8SAU0340120 Radial Geared-Up RH1:2 ERA208SAU0340220 Radial Geared-Up RH1:2 ERA20 Coolant Thru*8SAU0341120 Radial Geared-Up LH1:2 ERA208SAU0341220 Radial Geared-Up LH1:2 ERA20 Coolant Thru*

12SAU0360225 Opposite Face Radial Twin RH Driven H=10012SAU0361225 Opposite Face Radial Twin LH Driven H=10029SAU0371100 Gear Hobber RH29SAU0371110 Gear Hobber LH29SAU0372100 Gear Hobber RH 2:129SAU0372110 Gear Hobber LH 2:120SAU0410140 Radial RH MTSK40 H=7020SAU0411140 Radial LH MTSK40 H=7021SAU0420140 Radial RH MTSK40 H=10022SAU0430140 Radial RH MTSK40 H=13022SAU0431140 Radial LH MTSK40 H=13014SAU0446132 Axial Geared-Up Re-Directed ERA32 RH14SAU0446232 Axial Geared-Up Re-Directed ERA32 RH Coolant

Thru*14SAU0447132 Axial Geared-Up Re-Directed ERA32 LH14SAU0447232 Axial Geared-Up Re-Directed ERA32 LH Coolant

Thru*19SAU0450216 Radial RH Single Side Twin Head ER16 19SAU0450225 Radial RH Single Side Twin Head ER2519SAU0451216 Radial LH Single Side Twin Head ER16 19SAU0451225 Radial LH Single Side Twin Head ER25


driven and static tooling for dmg · driven and static tooling for dmg 10139 bergin rd. howell, mi...

Documents