driven by precisionaa-boschap-rs.resource.bosch.com/media/master_workshop...trolley and the target...
TRANSCRIPT
PRECISIONDriven by
Advanced Driver Assistance System (ADAS)Precise and efficient adjustment
with Bosch
2
Driven by the future of automated and connected mobility, advanced driver assistance systems (ADAS) are increasinglyestablishing themselves in a market moving towards automated driving. The fitment rate of driver assistance systems is growing very dynamically - even in the lower vehicle segments. Driver assistance systems increase safety, helping to prevent accidents.
In order to be well prepared for the upcoming challenges and developments for driver assistance systems, Bosch offers a wide range of calibration tools and devices for the workshops, covering all major European, Japanese and Korean makes.
Trends for Advanced Driver Assistance Systems
Which use case requires ADAS services or sensor calibration?
Accident repair
Service
Minor repairs
Windscreen exchange
Wheel Alignment
Tuning
Troubleshooting
Sensor replacement
Calibration of driver assistance systems by Bosch
� DAS 1000: Adjustment of ACC, lane assistance system and front camera of the VW group in combination with a suitable wheel aligner (e.g. FWA 46x0) and ESI[tronic].
� DAS 1000 + SCT 1415 + suitable calibration targets of the Multi-Target Shop: Adjustment of ACC, lane assistance system and front camera of the VW group in combination with a suitable wheel aligner (e.g. FWA 46x0) and
ESI[tronic]. In addition the front camera calibration can be performed for many vehicle manufacturers outside the VW group with the specific calibration targets and ESI[tronic].
� SCT 415 + suitable calibration targets of the Multi-Target Shop: Performance of the front camera calibration for many vehicle manufacturers outside the VW group with the specific calibration targets and ESI[tronic].
3
* More information on page 9** Or with FWA 4455 (CCD)
Diagnostic bay complying with Volkswagen standards
Universal diagnostic bay complying with Volkswa-
gen standards and for many other vehicle manu-
facturers
Multi-Target ShopStarter Kit* With the most importantcalibration targets
ESI[tronic] 2.0 and diagnostic device KTS Diagnostic solution from Bosch for the dynamic/static calibration
DAS 1000Calibration set
FWA 4630/4650** Wheel aligner with3D measurement
SCT 1415Precision measuring bar for
calibration targets (picture shows optional Nissan targets)
If your workshop equipment already includes Bosch 3D wheel-alignment and an appropriate Bosch diagnosis unit, you can easily upgrade by means of the DAS 1000 calibration set. This will allow your workshop to effectively perform adjustment and setup of assistance systems.
The professional diagnostic bay: A solution for testing the driver assistance systems
Professional DAS service in 5 steps:
� Vehicle reception and identification
� Measurement Quick and precise determination of the geome-tric driving axle through measurement of toe, camber, offset and caster/axle inclination
� Evaluation of test results Adjust if necessary
� Perform DAS service Position DAS 1000 at the prescribed position in front of the vehicle. All steps are program-gui-ded and illustrated by the FWA software. Start control-unit diagnosis with the KTS and cali-brate.
� Finishing and documentation
4
FWA Key Code
Specification
Valid only on testmobil.de. Requires account and prior acceptance of license and usage terms. Compatible software, hardware, and Internet access required. No replacement of code, if lost. Content subject to availability at the time of actual download.
www.testmobil.de
FWA Key Cardwww.testmobil.de
2
LASER
Example DAS 1000 Version for Bosch 3D-wheel aligner FWA 4630 or 4650
� Complete DAS 1000 adjustment jig for mobile application at the workplace.
� �Key-Cards for installation on the computer of the FWA 4630/4650 wheel aligner including licenses and registration of the workplace
� �Two 3D measurement boards for alignment of DAS 1000
� �BAT 645 high-frequency battery charger to ensure the correct battery capacity during the calibration*
ACC with radar sensor, lane-departure warning system with camera behind the windshield and night-vision systemsnowadays form part of the standard equipment of many Volkswagen, Audi, Škoda and SEAT vehicles. Latest driver assistancesystems (DAS) need to be maintained regularly and must be readjusted e.g. after an accident or replacement of a windshieldwith a front camera mounted to it. That is what we call DAS service.
DAS 1000: Adjustment of ACC, lane assistance system and front camera of the VW group
Radar Tilting mirror (VAS 6430-3)
FWA 3D Target
Robust Trolley (VAS 6430-8)
Camera Target(VAS 6430-4)
Jig+crossbar(VAS 6430-1)
Radar Laser Target (VAS 6430-2)
Key-Cardsfor SW download
BAT 645
FWA 3D Targets
5
DAS 1000 Scope of delivery
FWA 4650 Kit (3D)FWA 4630/4650 (3D)FWA 4455 (CCD)
For Bosch wheel aligner Solution for glass
specialists with Bosch wheel aligner
Scope of delivery DAS 1000/800 versions
DAS 1000
DAS 1000 CCD
DAS 1000 3D
DAS 1000 3D S1
DAS 800 CCD
DAS 800 3D
Carrier column with linear unit and adjustment bar • • • • • •
ACC/ADR laser box for passive adjustment of radar sensors • • • •
ACC reflector mirror for active adjustment of radar sensors • • • •
Calibration target for the adjust-ment of the front camera • • • • • •
Mobile base frame as mountingfor the carrier column • • • • •
Static base frame (XY dra-wbar) as mounting for the carrier column
•
Socket wrench for the adjust-ment of radar sensors • • • •
3D measurement boards foralignment of the adjustment bar • • •
Software bundle for FWA 46x0+
• • •
Software bundle for FWA 4455+ • •
BAT 645 High-frequency bat-tery charger (Q2/2018) • • •
Order number: 1 692 000 016 1 692 000 013 1 692 000 011 1 692 000 017 1 692 000 014 1 692 000 012
Recommended Bosch wheel aligner:
6
2
LASER
1
LASER
SCT 1415/1410: Precision measuring barfor universal calibration
Three alignment methods: DAS 1000 combined with SCT 1415
� 3D or CCD wheel alignment (-> geometric driving axle)� line laser (-> longitudinal vehicle center line)
With CCD wheel alignment(Calibration targets for Opel/Fiat/Kia/Hyundai illustrated)
With 3D measurement boards(Calibration targets for Nissanillustrated)
With 3D wheel alignment(Calibration targets for Mercedes-Benz illustrated)
SCT high-precision measuring bar for calibration target mounting (see page 9 for targets)
SCT 1415
Comprehensive coverage of the front camera calibration will be achieved by upgrading the system with the SCT 1415. In combination with the optional calibration targets the service can be extended for all important European, Japanese and Korean vehicle manufacturers.
You simply need to mount the precision measurement bar, which is able to carry the calibration targets, on the DAS 1000 trolley and you are ready to go. Precise orientation of the trolley and the target relative to the driving axle is made possible with the FWA 4xxx program.
7
Product Symbol* Laser class Labeling Warning
SCT 415 / 410 / 1415 / 1410
Laser 1M
DAS 1000 / VAS 6430-2 / VAS 6430-3
Laser 22
LASER
ProduktFamilie
Handels-marke Produkt Art.-Nr. IEC Laser
Klasse Warn-Label Hinweis-Label zusätzliche Hinweise
1690 901 001
1690 901 002
Beissbarth P-Assist P5 1690 381 174Bosch P-Assist P5 1690 381 124
SCT 415 1690 380 113SCT 415 S7 1690 380 104SCT 410 1690 380 115CCT 3500 1690 380 111CCT 3500 1690 380 114CCT 3100 1690 380 110CCT 3100 1690 380 112
Beissbarth DACT 100Laser projector 1690 381 501
SCT 416 L1 1690 381 512ACC100/200Laser projector 1685 357 058
CCT 3500 pro 1690 380 117DACT 2000 1690 380 500DACT 2010 1690 380 502DACT 2300 1690 380 503ACC 100 0684 300 100ACC 200 0684 300 103SCT 416 1690 380 116SCT 416 S7 1690 380 105
RSCD 2100 Adjusting Device 1690 380 400
RSCD 2100Aligning Unit 1690 381 407
Beissbarth MLD815 1692 104 323Beissbarth MLD815 (ILS in SW) 1692 104 329Beissbarth MLD815 (Ford) 1692 104 338Beissbarth MLD815 (Maserati) 1692 104 340Bosch HTD815 (RAL6018) 1692 104 326Bosch HTD815 (RAL7016) 1692 104 327Bosch HTD815 (RAL6018, ILS) 1692 104 328Bosch HTD815 (RAL7016, ILS) 1692 104 333Beissbarth Laser visor 1692 105 102Bosch Laser visor 1692 105 147Beissbarth Lens module (RAL 7040) 1692 105 049Bosch Lens module (RAL 6018) 1692 105 070Beissbarth/ Bosch Lens module (RAL 7016) 1692 105 074
VAS 6430/2 (Lasereinheit) 938 402 005VAS 6430/2 (Teilesatz) 938 401 012VAS 6430/2-C (Teilesatz) 1690 384 032VAS 6430/3 (Spiegel) 938 402 008VAS 6430/3 (Teilesatz) 938 401 013VAS 6430/3-C (Teilesatz) 1690 384 033VAS 6430/10 (Spiegel) 1690 381 013VAS 6430/10 (Teilesatz) 1690 380 028VAS 6430/10 M (Spiegel) 1690 381 037VAS 6430/10 M (Teilesatz) 1690 380 163
Laserstrahlung nicht direkt mit optischen Instrumenten betrachtenTouchless Beissbarth/ Bosch
Touchless /FWA 9000 1M
SCT 415 1M Laserstrahlung nicht direkt mit optischen Instrumenten betrachten
MLD 815 3R
RSCD 2100 Beissbarth 1
VAS 6430/xx Beissbarth 2
Bosch
Beissbarth
Bosch
Bosch
Beissbarth
SCT 416 2LASER
2
Entry level variant on wheel alignment bay
SCT 1415 S1 SCT 1415 S2 SCT 1410
Precision measurement bar • • •Mount (installed to DAS 1000) • • • Position indicator height adjustment • • •
Ruler for extended height adjustment • • •
Mount for large Targets • • •Universal tape measure bracket (2 units) • • •Measure bracket 5m (2 units) • • •Wall bracket for precision measurement bar • • •
Keycard for Program FWA4xxx+ • • •Short Manuals for vehicle specific setup • • •Laser for alignment vehicle center line • •SCT 410 Jig for 2nd measurement bay (like SCT 415 but with a simplified mounting of the mea-suring bar and without height ruler)
•
Order number: 1 690 380 101 1 690 380 100 1 690 380 123
Scope of delivery
SCT 1415/1410: Scope of delivery andlaser module
Hazard categories of laser technologies
*symbolic illustrations of the laser classes
Laser module on measuring bar SCT 1415 SCT 410 is part of the scope of delivery of SCT 1415 S2 (with optional Nissan targets)
Laser Radiation! Do not view directly with optical instrumentsLASER
CAUTION
1M
ProduktFamilie
Handels-marke Produkt Art.-Nr. IEC Laser
Klasse Warn-Label Hinweis-Label zusätzliche Hinweise
1690 901 001
1690 901 002
Beissbarth P-Assist P5 1690 381 174Bosch P-Assist P5 1690 381 124
SCT 415 1690 380 113SCT 415 S7 1690 380 104SCT 410 1690 380 115CCT 3500 1690 380 111CCT 3500 1690 380 114CCT 3100 1690 380 110CCT 3100 1690 380 112
Beissbarth DACT 100Laser projector 1690 381 501
SCT 416 L1 1690 381 512ACC100/200Laser projector 1685 357 058
CCT 3500 pro 1690 380 117DACT 2000 1690 380 500DACT 2010 1690 380 502DACT 2300 1690 380 503ACC 100 0684 300 100ACC 200 0684 300 103SCT 416 1690 380 116SCT 416 S7 1690 380 105
RSCD 2100 Adjusting Device 1690 380 400
RSCD 2100Aligning Unit 1690 381 407
Beissbarth MLD815 1692 104 323Beissbarth MLD815 (ILS in SW) 1692 104 329Beissbarth MLD815 (Ford) 1692 104 338Beissbarth MLD815 (Maserati) 1692 104 340Bosch HTD815 (RAL6018) 1692 104 326Bosch HTD815 (RAL7016) 1692 104 327Bosch HTD815 (RAL6018, ILS) 1692 104 328Bosch HTD815 (RAL7016, ILS) 1692 104 333Beissbarth Laser visor 1692 105 102Bosch Laser visor 1692 105 147Beissbarth Lens module (RAL 7040) 1692 105 049Bosch Lens module (RAL 6018) 1692 105 070Beissbarth/ Bosch Lens module (RAL 7016) 1692 105 074
VAS 6430/2 (Lasereinheit) 938 402 005VAS 6430/2 (Teilesatz) 938 401 012VAS 6430/2-C (Teilesatz) 1690 384 032VAS 6430/3 (Spiegel) 938 402 008VAS 6430/3 (Teilesatz) 938 401 013VAS 6430/3-C (Teilesatz) 1690 384 033VAS 6430/10 (Spiegel) 1690 381 013VAS 6430/10 (Teilesatz) 1690 380 028VAS 6430/10 M (Spiegel) 1690 381 037VAS 6430/10 M (Teilesatz) 1690 380 163
Laserstrahlung nicht direkt mit optischen Instrumenten betrachtenTouchless Beissbarth/ Bosch
Touchless /FWA 9000 1M
SCT 415 1M Laserstrahlung nicht direkt mit optischen Instrumenten betrachten
MLD 815 3R
RSCD 2100 Beissbarth 1
VAS 6430/xx Beissbarth 2
Bosch
Beissbarth
Bosch
Bosch
Beissbarth
SCT 416 2
1
LASER
8
SCT 415: smart alternative as a secondary work bay
Universal mounting for the high precision measuring bar. Vehicle specific targets from the multi-target shop and the laser unit complete the measuring system. A computer is not required.
Perfect to calibrate driver assistance systems when wheel alignment is not required by the manufacturer.
� High flexibility due to multi-target shop (see below)
� Complete system coverage� Quick set-up: Switching of calibration targets and their alignment
towards the vehicle can be done within seconds.� Maximum calibration accuracy due to magnetic calibration target
mounting with polarised sockets� Fine adjustment of heading, pitch and roll angles� Complies with the specifications of the most important European,
Japanese and Korean vehicle manufacturers� Line laser for the alignment towards the vehicle� Green laser line is visible even in bright ambient light. Alignment to the
vehicle center line or its chassis is done without the aid of a computer.
ProduktFamilie
Handels-marke Produkt Art.-Nr. IEC Laser
Klasse Warn-Label Hinweis-Label zusätzliche Hinweise
1690 901 001
1690 901 002
Beissbarth P-Assist P5 1690 381 174Bosch P-Assist P5 1690 381 124
SCT 415 1690 380 113SCT 415 S7 1690 380 104SCT 410 1690 380 115CCT 3500 1690 380 111CCT 3500 1690 380 114CCT 3100 1690 380 110CCT 3100 1690 380 112
Beissbarth DACT 100Laser projector 1690 381 501
SCT 416 L1 1690 381 512ACC100/200Laser projector 1685 357 058
CCT 3500 pro 1690 380 117DACT 2000 1690 380 500DACT 2010 1690 380 502DACT 2300 1690 380 503ACC 100 0684 300 100ACC 200 0684 300 103SCT 416 1690 380 116SCT 416 S7 1690 380 105
RSCD 2100 Adjusting Device 1690 380 400
RSCD 2100Aligning Unit 1690 381 407
Beissbarth MLD815 1692 104 323Beissbarth MLD815 (ILS in SW) 1692 104 329Beissbarth MLD815 (Ford) 1692 104 338Beissbarth MLD815 (Maserati) 1692 104 340Bosch HTD815 (RAL6018) 1692 104 326Bosch HTD815 (RAL7016) 1692 104 327Bosch HTD815 (RAL6018, ILS) 1692 104 328Bosch HTD815 (RAL7016, ILS) 1692 104 333Beissbarth Laser visor 1692 105 102Bosch Laser visor 1692 105 147Beissbarth Lens module (RAL 7040) 1692 105 049Bosch Lens module (RAL 6018) 1692 105 070Beissbarth/ Bosch Lens module (RAL 7016) 1692 105 074
VAS 6430/2 (Lasereinheit) 938 402 005VAS 6430/2 (Teilesatz) 938 401 012VAS 6430/2-C (Teilesatz) 1690 384 032VAS 6430/3 (Spiegel) 938 402 008VAS 6430/3 (Teilesatz) 938 401 013VAS 6430/3-C (Teilesatz) 1690 384 033VAS 6430/10 (Spiegel) 1690 381 013VAS 6430/10 (Teilesatz) 1690 380 028VAS 6430/10 M (Spiegel) 1690 381 037VAS 6430/10 M (Teilesatz) 1690 380 163
Laserstrahlung nicht direkt mit optischen Instrumenten betrachtenTouchless Beissbarth/ Bosch
Touchless /FWA 9000 1M
SCT 415 1M Laserstrahlung nicht direkt mit optischen Instrumenten betrachten
MLD 815 3R
RSCD 2100 Beissbarth 1
VAS 6430/xx Beissbarth 2
Bosch
Beissbarth
Bosch
Bosch
Beissbarth
SCT 416 2
Product Symbol* Laser class Labeling Warning
SCT 415/410 Laser 1M
Laser Radiation! Do not view directly with optical instruments
LASERCAUTION
1M
ProduktFamilie
Handels-marke Produkt Art.-Nr. IEC Laser
Klasse Warn-Label Hinweis-Label zusätzliche Hinweise
1690 901 001
1690 901 002
Beissbarth P-Assist P5 1690 381 174Bosch P-Assist P5 1690 381 124
SCT 415 1690 380 113SCT 415 S7 1690 380 104SCT 410 1690 380 115CCT 3500 1690 380 111CCT 3500 1690 380 114CCT 3100 1690 380 110CCT 3100 1690 380 112
Beissbarth DACT 100Laser projector 1690 381 501
SCT 416 L1 1690 381 512ACC100/200Laser projector 1685 357 058
CCT 3500 pro 1690 380 117DACT 2000 1690 380 500DACT 2010 1690 380 502DACT 2300 1690 380 503ACC 100 0684 300 100ACC 200 0684 300 103SCT 416 1690 380 116SCT 416 S7 1690 380 105
RSCD 2100 Adjusting Device 1690 380 400
RSCD 2100Aligning Unit 1690 381 407
Beissbarth MLD815 1692 104 323Beissbarth MLD815 (ILS in SW) 1692 104 329Beissbarth MLD815 (Ford) 1692 104 338Beissbarth MLD815 (Maserati) 1692 104 340Bosch HTD815 (RAL6018) 1692 104 326Bosch HTD815 (RAL7016) 1692 104 327Bosch HTD815 (RAL6018, ILS) 1692 104 328Bosch HTD815 (RAL7016, ILS) 1692 104 333Beissbarth Laser visor 1692 105 102Bosch Laser visor 1692 105 147Beissbarth Lens module (RAL 7040) 1692 105 049Bosch Lens module (RAL 6018) 1692 105 070Beissbarth/ Bosch Lens module (RAL 7016) 1692 105 074
VAS 6430/2 (Lasereinheit) 938 402 005VAS 6430/2 (Teilesatz) 938 401 012VAS 6430/2-C (Teilesatz) 1690 384 032VAS 6430/3 (Spiegel) 938 402 008VAS 6430/3 (Teilesatz) 938 401 013VAS 6430/3-C (Teilesatz) 1690 384 033VAS 6430/10 (Spiegel) 1690 381 013VAS 6430/10 (Teilesatz) 1690 380 028VAS 6430/10 M (Spiegel) 1690 381 037VAS 6430/10 M (Teilesatz) 1690 380 163
Laserstrahlung nicht direkt mit optischen Instrumenten betrachtenTouchless Beissbarth/ Bosch
Touchless /FWA 9000 1M
SCT 415 1M Laserstrahlung nicht direkt mit optischen Instrumenten betrachten
MLD 815 3R
RSCD 2100 Beissbarth 1
VAS 6430/xx Beissbarth 2
Bosch
Beissbarth
Bosch
Bosch
Beissbarth
SCT 416 2
1
LASER
SCT 415: Stand-alone solution forthe multi-target shop
Hazard categories of laser technologies
*symbolic illustrations of the laser classes
Scope of delivery SCT 415:
� Professional target board fixture mounted on 4 wheeled base plate with level setting screws
� Precision measurement bar with measurement scale for accurate positioning of vehicle specific targets
� Height ruler� 1-pager vehicle specific setup instructions� Additional holder arm for XL Targets� 5m Tape measure + universal bracket� Special Line laser for jig orientation towards the vehicle
center line*Targets not included, refer to Multi-Target shop!
Order number: 1 690 380 120
9
Note: Set = 2 targets
ToyotaType 1
Order number: 1 690 382 287
ToyotaType 3
Order number: 1 690 382 355
HondaType 2
Order number: 1 690 382 297
HondaType 3
Order number: 1 690 382 349
Calibration target XL-Univ. for Kia/ Hyundai/FiatType 1
Order number: 1 690 382 288
Mercedes-BenzType 1 (Pkw)
Order number: 1 690 382 312
Mazda Type 1
Order number: 1 690 382 318
Mazda Type 2 (Set)
Order number: 1 690 381 234
Nissan Type 1 (Set)
Order number: 1 690 381 139
NissanType 2 (Set)
Order number: 1 690 381 140
Mercedes-BenzType 2 (Sprinter)
Order number: 1 690 382 319
Kia/HyundaiType 2
Order number: 1 690 382 320
Multi-Target Shop Starter Kit 1 7 target types consisting of: Mercedes Typ 1, Toyota Typ 1 & 3, Mazda Typ 1, Nissan Typ 1, Honda Type 3, XL-Universal
Order number: 1 690 381 241
Subaru Type 3
Order number: 1 690 382 308
Subaru Type 2
Order number: 1 690 382 329
Toyota/LexusType 2
Order number: 1 690 382 328
Kia / HyundaiType 3
Order number: 1 690 382 316
HondaType 1
Order number: 1 690 381 143
MitsubishiType 1 (Set)
Order number: 1 690 381 218
Calibration targets Univ. Renault, Smart, Infiniti Type 1 (Set)
Order number: 1 690 381 142
Multi-Target Shop: Calibration targets for the following vehicle manufacturers
Multi-Target Shop Starter Kit 2 3 target types consisting of: Mercedes Type 1 & Type 2, XL-Universal
Order number: 1 690 381 242
10
1) Depending on the system, in combination with a calibration drive;2) For some vehicle types also with dynamic calibration;O in preparation (•) XL reflector SCT 1310 recommended for mid-range radar* in preparation
Front-camera (lane assistance) Radar-sensor (ACC, braking assistance)
Calibration drive Static with calibration targets Calibration
drive Static with reflectors
Manufacturer DAS 1000DAS 800
SCT 1415SCT 1410
SCT 415SCT 410 DAS 1000 SCT 1310* SCT 815*
SCT 810*
Alfa Romeo • • (•)
Audi • • (•)
BMW • • (•)
Chrysler • •Citroën •2) •2) •Fiat • • • (•)
Ford • •
Honda •1) •1) •Hyundai • • •
Jaguar • •Jeep •2) •2) •2) (•)
KIA • • •Land Rover
Mazda • • •Maserati • • (•)
Mercedes-Benz •1) •1) •Mitsubishi • • • (•)
Nissan • • • (•)
Opel • • •Peugeot •2) •2) •Porsche • • (•)
Renault •2) •2) •2)
Seat • • (•)
Škoda • • (•)
Smart • •Subaru • •Suzuki O O • (•)
Toyota • • •Volkswagen • • (•)
Volvo • •
Professional DAS service: Calibration of front cameras
11
Additional tools for the dynamic calibration of front cameras
Article Order number
RSAD 100 (Mercedes) 1 690 380 004
Accessories
ESI[tronic] 2.0: Diagnostic software for controlling vehicle specific calibration and adjustment procedures
Software:
The vehicle manufacturer decides which learning method for the sensors is used. Bosch supports workshops with the right tools, test equipment and the necessary diagnostic software to perform the adjustment procedures. The ESI[tronic] actually has the following vehicle coverage to support you during the process:
� More than 17.000 model specific assignments for radar based assistance systems� More than 42.000 model specific assignments for camera based assistance systems� More than 24.000 model specific assignments for intelligent lighting systems
2018
/01
Sub
ject
to te
chni
cal a
nd p
rogr
amm
e ch
ange
s.
Bosch technologies are used worldwide in almost all vehicles.People, and assuring their mobility, is what we are focused on.
Therefore, we have dedicated the last 125 years of pioneering spirit and expertise in research and manufacturing to achieving this.
We continue to work on our unique combination of solutions for spare parts, diagnostic devices, workshop equipment and services:
� Solutions for efficient vehicle repairs
� Innovative workshop equipment and software
� The world’s most comprehensive range of new and replacement parts
� Large network of wholesale customers, for quick and reliable parts supply
� Competent hotline support
� Comprehensive educational and training offers
� Targeted sales and marketing support
Driven by efficiency
Robert Bosch GmbHAutomotive AftermarketBusiness Unit Automotive Service Solutions
73201 PlochingenGermanybosch-werkstattwelt.de
Find out more at: bosch-automotive-aftermarket.com
What drives youdrives us