drw1 - introduction to computer aided design (2d)
TRANSCRIPT
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
1/6
AMG SKILLED HANDS TECHNOLOGICAL COLLEGE
Makapilapil, San Ildefonso, Bulacan
COURSE CODE : DRW 1
COURSE TITLE : Drawing 1 (Introduction to AutoCAD)
COURSE DESCRIPTION :
This course will cover two-dimentional commands in AutoCAD.
PLACEMENT : 2nd year -1st Semester, School Year 2009-2010
ALLOCATION : Three (3) UnitsPRE-REQUISITES: : None
GENERAL OBJECTIVES :
Upon completion of the course, the student will be able to:
Become familiar with using the essential 2D features of AutoCAD
Draw 2D drawing plan of a building
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
2/6
UNIT NO./TITLE CONTENT TIME FRAME
1. Introduction to AutoCADThe AutoCAD Interface
ObjectivesThe model spaceThe ribbonThe menu browser
Using the command lineActivating toolbarsDocking palettesThe status barSaving workspaceExercises
Week 1
2. Opening, Viewing, and Saving Drawings ObjectivesOpening existing drawingMouse functionsZooming, panning, and regeneratingWorking in a multiple-document environmentUsing templatesExercises
Week 2
3. Drawing Fundamentals Objectives
Drawing linesUsing Ortho and Polar modesUsing heads-up displaySet units of measureWorking with metric unitsExercises
Week 3 & 4
4. Prelim Exam Week 5
5. Controlling Accuracy ObjectivesCartesian coordinatesUsing object snapsExercises
Week 6
6. Primary Modifications ObjectivesMoving and copying elementsRotating elementsCreating offset linesErasing elementsExercises
Week 7 & 8
7. Selecting Entities ObjectivesSelecting elements with windowsRemoving elements from selectionsExercises
Week 9
8. Making Major Changes Objectives Week 10
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
3/6
Trimming and extending elementsFillets and chamfersUsing arraysApplying mirror imageStretching elementsScaling elementsExploding elementsJoining elements
9. Organizing Drawings ObjectivesLayers
Layer properties managerLayer controlByLayer property
Exercises
Week 11 & 12
10. Midterm Exam Week 13
11. General Annotation ObjectivesAnnotating with single-line textJustifying textCreating text stylesEditing textExercises
Week 14 & 15
12. Dimensioning ObjectivesCreating dimensionsCreating dimension stylesInserting calloutsModifying dimensionsExercises
Week 16
13. Basic Exception Handling Creating quick plotsSelecting a pen tableLayoutsModel spaceExercises
Week 17
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
4/6
LEARNING OBJECTIVES CONTENTLEARNING
EXPERIENCEVALUE FOCUS
LEARNINGEVALUATION/APPLICATION
1. Introduction to AutoCADThe AutoCAD InterfaceObjectives:
At the end of the lesson, the student should beable to:
Identify parts of the user interface
Change settings on the ribbon
Issue a command using the ribbon andcommand window
The model spaceThe ribbonThe menu browserUsing the command lineActivating toolbarsDocking palettesThe status barSaving workspace
LectureDiscussionHands-on
Diligence Hands-on exercise
2. Opening, Viewing, and Saving Drawings
Objectives:At the end of the lesson, the student should beable to:
Open existing drawing file
Use mouse to adjust drawing area
Opening existing drawingMouse functionsZooming, panning, and regeneratingWorking in a multiple-document environmentUsing templates
LectureHands-on
ListeningCoordination
RecitationHands-on exercise
3. Drawing Fundamentals
Objectives:At the end of the lesson, the student should beable to:
Create lines using the line command
Set modes using ortho and polar
Set units of measurement
Drawing lines
Using Ortho and Polar modesUsing heads-up displaySet units of measureWorking with metric units
Lecture
Hands-on
Listening
Analysis
Quiz
4. Controlling AccuracyObjectives:
At the end of the lesson, the student should beable to:
Explain what cartesian coordinate is
Use object snaps
Cartesian coordinatesUsing object snaps
LectureDiscussionHands-on
DiligenceSelf-confidence
Hands-on exercise
5. Primary ModificationsObjectives:
At the end of the lesson, the student should beable to:
Manipulate elements using move, copyand rotate commands
Create lines using offset command
Moving and copying elementsRotating elementsCreating offset linesErasing elements
LectureHands-on
ListeningAnalyis
RecitationHands-on exercise
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
5/6
Erase elements using erase command
6. Selecting EntitiesObjective:
At the end of the lesson, the student should beable to:
Manipulate elements with windows and
from selections
Selecting elements with windowsRemoving elements from selections
LectureHands-on
Listening Quiz
7. Making Major ChangesObjectives:
At the end of the lesson, the student should beable to:
Make changes on an element using trim,extend, fillet, chamfer, mirror, stretch,scale, explode and join commands
Trimming and extending elementsFillets and chamfersUsing arraysApplying mirror imageStretching elementsScaling elementsExploding elementsJoining elements
LectureDiscussionHands-on
Diligence Hands-on exercise
8. Organizing DrawingsObjective:
At the end of the lesson, the student should beable to:
Categorize objects using layers
LayersLayer properties managerLayer controlByLayer property
LectureHands-on
ListeningCreativity
RecitationHands-on exercise
9. General AnnotationObjectives:
At the end of the lesson, the student should beable to:
Add text to a drawing
Modify text in a drawing
Annotating with single-line textJustifying textCreating text stylesEditing text
LectureHands-on
Listening Quiz
10. DimensioningObjective:
At the end of the lesson, the student should beable to:
Apply dimensions to drawings
Creating dimensionsCreating dimension stylesInserting calloutsModifying dimensions
LectureDiscussionHands-on
Diligence Hands-on exercise
11. PlottingObjectives:
At the end of the lesson, the student should beable to:
Set drawings for plotting
Apply layouts to drawings
Creating quick plotsSelecting a pen tableLayoutsModel space
LectureHands-on
ListeningCooperation
RecitationHands-on exercise
-
8/7/2019 DRW1 - Introduction to Computer Aided Design (2D)
6/6
REFERENCES:
www.lynda.com
www.autocadmark.com
AutoCAD 2009 and AutoCAD LT 2009 All-in-One Desk Reference for Dummies, Wiley
Prepared by: Checked by: Noted by:
Eric Ebenezer V. Quitalig Ryan C. Rodriguez Oliver DA. DetaloICT Trainer ICT Program Coordinator School Administrator