drying oven catalog - labkerlabker.hu/wp-content/uploads/drying_oven_catalog.pdf · industrial...
TRANSCRIPT
Drying Oven
1
Drying Oven
Drying Oven Description page 03Temp Variation Sheet page 05
SpecificationSH-DO-54,100,149NG page 06SH-DO-54,100,149,250FG page 08SH-DO-360,550FG page 10350 High Temp Drying Oven page 12500 Super High Temp Drying Oven page 14
Clean Drying Oven page 16Description page 17
SpecificationSH-CLFDO90,150 page 18
Industrial Drying OvenDescription page 19
Specification SH-DO-864,1152,2250,3612FG page 20
Options page 22
2
www.labker.hu
DRYING OVEN
A Drying Oven is an equipment which is generally used at laboratories and industries. The main function of a Drying Oven is to keep the constant temperature for a certain set period.A Drying Oven can be classified in two depending on the type of air circulation; forced air circulation and natural air circulation
FEATURES
It has excellent durability because chamber and Shelves are made of stainless steel.
Silicon Rubber Packing and powerful lock device is equipped. Therefore it can minimize the heat leakage and loss by blocking from outside when closing the door.
Membrane Touch Type control panel is made in a compact design having good outer appearance.
Has a ”Heating control dual function” which enables it to control the wide range of temperature and be accurate at ±0.1
FEATURES
It has excellent durability because chamber and Shelves are made of stainless steel.
Silicon Rubber Packing and powerful lock device is equipped. Therefore it can minimize the heat leakage and loss by blocking from outside when closing the door.
Membrane Touch Type control panel is made in a compact design having good outer appearance.
Has a ”Heating control dual function” which enables it to control the wide range of temperature and be accurate at ±0.1
3
www.labker.hu
DRYING OVEN
4
www.labker.hu
Temperature Variation (Uniformity) Sheet
24Hours EXAM
Operation Temp 120
Reach to Operation Temp in 14 min
Got Temp Stabilization in 19 min
SH-DO-149FG Temperature Variation Data
5
www.labker.hu
NATURAL CONVECTION OVEN
SH-DO-149NG
Stainless Steel ShelfFree Up/Down Movable
Over Temp Controller
Model SH-DO-54NG SH-DO-100NG SH-DO-149NGAir Circulation type Natural
Temp Range Ambient +5 to 250
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp Accuracy & Stability ±0.1
Temp Uniformity ±3.0 at 120
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Heater Signal Type SSR Contactless Control Type
Heater capa 500W 1000W 1500W
Dimension Internal 380×340×420(W×D×H )
480×400×530(W×D×H )
555×450×600(W×D×H )
Dimension External 500×472×798 600×542×908 675×592×978
Capa 54 L 100 L 150 L
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220V, 1Φ, 2.3A 220V, 1Φ, 4.6A 220V, 1Φ, 6.8A
Accessory
Option
Safety Device
Movable Stainless Steel Plate 2ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedDoor open alarmElectric leakage breakerOver Temp Controller
Specification
6
www.labker.hu
Drawing
Model SH-DO-54NG SH-DO-100NG SH-DO-149NG
Dimension Internal 380×340×420 480×400×530 555×450×600
Dimension External(X x Y x Z) 500×472×798 600×542×908 675×592×978
7
www.labker.hu
FORCED CONVECTION OVEN
Internal View of Drying Oven
Stainless Steel ShelfFree Up/Down Movable
Over Temp Controller
Model SH-DO-54FG SH-DO-100FG SH-DO-149FG SH-DO-250FG
Air Circulation type Forced
Temp Range Ambient +5 to 250
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp Accuracy & Stability ±0.1
Temp Uniformity ±1.0 at 120
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Heater Signal Type SSR Contactless Control Type
Heater capa 800W 1500W 2000W 3000W
Dimension Internal380×340×420
(W×D×H ) 480×400×530
(W×D×H ) 555×450×600
(W×D×H ) 700×450×800
(W×D×H )
Dimension External 499×602×748 599×672×858 674×722×928 819×722×1128
Capa 54 L 100 L 150 L 250 L
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220V, 1Φ, 3.6A 220V, 1Φ, 6.8A 220V, 1Φ, 9A 220V, 1Φ, 14A
Accessory
Option
Safety Device
Movable Stainless Steel Plate 2ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedDoor open alarm & Motor OffElectric leakage breakerOver Temp Controller
Specification
8
www.labker.hu
Drawing
Model SH-DO-54FG SH-DO-100FG SH-DO-149FG SH-DO-250FG
Dimension Internal 380×340×420 480×400×530 555×450×600 700×450×800
Dimension External(X x Y x Z) 499×602×748 599×672×858 674×722×928 819×722×1128
9
www.labker.hu
FORCED CONVECTION OVEN
Internal View of Drying Oven
Stainless Steel ShelfFree Up/Down Movable
Model SH-DO-360FG SH-DO-550FG
Air Circulation type Forced
Temp Range Ambient +5 to 250
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp & Time controller Microprocess P I D Membrane Touch Digital controller
Temp Accuracy & Stability ±0.1
Temp Uniformity ±1.0 at 120
Heater Signal Type SSR Contactless Control Type
Heater capa 4000W 5000W
Dimension Internal 600×600×1000(W×D×H )
700×650×1200(W×D×H )
Dimension External 772×900×1385 872×959×1585
Capa 360 L 546 L
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220V, 1Φ, 18A 220V, 1Φ, 23A
DO-550FG
DO-360FG
Accessory
Option
Safety Device
Movable Stainless Steel Plate 2ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedDoor open alarm & Motor OffElectric leakage breakerOver Temp Controller
Specification
10
www.labker.hu
Drawing
Model SH-DO-360FG SH-DO-550FG
Dimension Internal 600×600×1000 700×650×1200
Dimension External(X x Y x Z) 772×900×1385 872×959×1585
11
www.labker.hu
350 HIGH TEMP Drying Oven
Model SH-DO-90FH SH-DO-150FHAir Circulation type Forced
Temp Range MAX 350
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp Accuracy & Stability ±0.1
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Heater Signal Type SSR Contactless Control Type
Heater capa 2600W 3000W
Dimension Internal 450×450×450(W×D×H )
500×500×600(W×D×H )
Dimension External 630×660×990 680×710×1140
Capa 91 L 150 L
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220V, 1Φ, 12A 220V, 1Φ, 14A
Using an ordinary Drying Oven at higher than 200C, a Thermal shock may cause a crack or distortion to the chamber.
We recommend the use of a high temp Drying Oven for an operation that is higher than 200c.It is designed to keep a constant temperature safely at high temperature and have better durability at high temperature operation.
FeatureBy means of high temp. Packing and powerful Lock Device, there are no troubles in
keeping high temperature and heating.
Accessory
Option
Safety Device
Movable Stainless Steel Plate 2ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedDoor open alarm & Motor OffElectric leakage breakerOver Temp Controller
Specification
12
www.labker.hu
Drawing
Model SH-DO-90FH SH-DO-150FH
Dimension Internal 450×450×450 500×500×600
Dimension External(X x Y x Z) 630×660×990 680×710×1140
13
www.labker.hu
500 SUPER HIGH TEMP Drying Oven
Model SH-DO-90FS SH-DO-150FS
Air Circulation type Forced
Temp Range MAX 500
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Temp Accuracy & Stability ±0.1
Heater Signal Type SSR Contactless Control Type
Heater capa 4200W 5600W
Dimension Internal 450×450×450(W×D×H )
500x500x600(W×D×H )
Dimension External 772x900x1385 872×959×1585
Capa 91 L 150 L
Moving Castor F-M #40
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon & Ceramic Packing
Power 220V, 1Φ, 19.1A 220V, 1Φ, 25.5A
Super high temp Drying Oven is good for using up to over 300C. Its design includes double case and air jacket cooling type cooler. This helps avoid problems caused by heat occurred on the equipment surface.
FEATUREIncrease the durability of drive fan motor by installing the fan motor cooling system suitable
for an environment over 400C.
Specification
Accessory
Option
Safety Device
Movable Stainless Steel Plate 2ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedDoor open alarm & Motor OffElectric leakage breakerOver Temp Controller
14
www.labker.hu
Drawing
Model SH-DO-90FS SH-DO-150FS
Dimension Internal 450×450×450 700×650×1200
Dimension External(X x Y x Z) 1180×700×897 1028×750×1047
15
www.labker.hu
CLEAN Drying Oven
FEATURE
Excellent Clean Air DistributionAir Circulation Type by means of Filtering causes urgent low state of wind velocity and
wind flow volume when it goes through the filter made in high density. Therefore due to the fact, air distribution degree and Thermal Uniformity can not but to decrease urgently.
To overcome this defect, our Clean Drying Oven has improved uniformity of air and temperature under low air velocity and low airflow volume by making air flow layer inside Door.
Excellent Filter DurabilityHefa filter of our Clean Drying Oven is not common filter for Clean bench. It is developed
for high temperature and high airflow volume in order to have durability under high temperature state.
Vertical StandVertical design for space effectiveness
This equipment can make the air clean below 100 Class by precipitations. So it can dry the samples in a clean environment.
This equipment is suitable for the need of precipitation dry like an LCD display maker or a semiconductor.
This oven includes an air cleaner so it can dry the sample in a clean environment, even if it is not installed in a clean room.
16
www.labker.hu
CLEAN Drying Oven
Model SH-CLFDO 90 SH-CLFDO 150
Air Circulation type 100 Class Below Forced
Temp Range Ambient +5 to 250
Operation Temp Range 40~200(inner Environment should be under 25)
Main Filter Hefa Filter 0.3μ 99.97% Efficiency Filter
Pre Filter Efficiency Nylon Filter
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Temp Accuracy & Stability ±0.1
Temp Uniformity ±1.5 at 100
Heater Signal Type SSR Contactless Control Type
Heater capa 1500W 2000W
Dimension Internal450×450×450
(W×D×H ) 600×500×500
(W×D×H )
Dimension External 610×860×1610 760×910×1660
Capa 91 L 150 L
Moving Caster F-M #60
Material Internal Stainless Steel SUS 304 with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220V, 1Φ, 7A 220V, 1Φ, 9A
High Temp Flow Hefa Filter99.97% 0.3μ Efficiency Filter
Clean Oven Internal View
Air Flow Sheet
Accessory
Option
Safety Device
Movable Stainless Steel Plate 3ea
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedElectric leakage breakerOver Temp Protection Devices
Specification
17
www.labker.hu
Drawing
Model SH-CLFDO 90 SH-CLFDO 150
Dimension Internal 600×600×1000 700×650×1200
Dimension External(X x Y x Z)
772×900×1385 872×959×1585
18
www.labker.hu
INDUSTRIAL Drying Oven
It is a generally used for large size industrial Drying Ovens. It can dry large amounts of samples at once .And has an installed Damper on the top so it can control the quantity of evaporated steam.
FEATURE
Powerful Circulation FanIndustrial Drying Oven has excellent quick drying function of mass volume material by using powerful Fan motor.
Electronic SafetyHas excellent safety toward big volume of equipment because it is equipped with anti-superheating function and protection circuit of Fan Motor
High efficient workabilityOur oven is convenient to install, Dry and collect mass material by using outer Cart and inner room cart in a time
19
www.labker.hu
INDUSTRIAL Drying Oven
Model SH-IDO-864FG SH-IDO-1152FG SH-IDO-2250FG SH-IDO-3612FGAir Circulation type Forced
Temp Range MAX 250
Time Range 00.00 to 99HR 59MIN (MIN SEC) Selectable Digital Counter Timer
Temp &Time controller Microprocess P I D Membrane Touch Digital controller
Temp Accuracy & Stability ±0.1
Heater Control Type SSR Contactless Control Type
Heater capa 7KW 9KW 18KW 23KW
Dimension Internal900×800×1200
(W×D×H ) 1200×800×1200
(W×D×H ) 1600×930×1500
(W×D×H ) 2150×1120×1500
(W×D×H )
Dimension External 1160×960×1890 1460×910×1948 1886×1084×2260 2750×1314×2260
Capa 864 L 1152 L 2232 L 3612 L
Material Internal Stainless Steel with Polishing Finished
Material External Steel Plate SS 41 With Powder Heating Coated
Material Packing Silicon Rubber Packing
Power 220v, 1Φ 32A 42A - -
Power 220v, 3Φ 19A 25A 50A 60A
Power 380v, 3Φ 12A 15A 30A 35A
※We accept Custom made order
Accessory
Option
Safety Device
Movable Stainless Steel Plate (idf864,1152)-3ea, (idf2250,3612) – 3EA x 2
Programmable Controller – see page 226 CH Digital Recorder - see page 232 Hybrid Recorder – see page 24Moving Cart & Room cart(Accessory will be Movable Stainless steel Plate wide 3 EA than 3EA x 2)
Automatic reset function incoming power cutBuzzer on When Set Time ArrivedFan motor Overload ProtectionElectric leakage breakerOver Temp Controller
Specification
20
www.labker.hu
Drawing
Model SH-IDO-864FG SH-IDO-1152FG SH-IDO-2250FG SH-IDO-3612FG
Dimension Internal 900×800×1200 1200×800×1200 1600×930×1500 2150×1120×1500
Dimension External(X x Y x Z) 1160×960×1890 1460×910×1948 1886×1084×2260 2750×1314×2260
21
www.labker.hu
OPTIONS(Programmable Controller)
• High Accuracy(±0.1%) with excellent Function • Multi Input : TC, RTD, DCV• Simultaneous and Multi output available in Max 4 Points • Easy parameter and value setting • Function to protect Over Shoot• RUN/STOP Function in the external Input contact point • Display of Running status in Auxiliary Output • Large Program Capacity : 2 Patterns / 30 Segments• Variety of Auxiliary Output available (ex IS, TS, PEND etc) • Input Piece Bias Function(Max 4 zone) • Automatic PID Parameter Calculation• Variety of communication Protocols • Reliable quality(CE, CUL, ISO applied)
Specification
DisplaySize 72(W) * 72(H) * 100(L) mmPV/SP Display 4 Digit
Operation Mode Program / Reset, 2 Zone PID
Control Mode 1CH ControlMax Channel -
Pattern & Segments 2 Pattern / Max 300 segments
Input
TC K, J, E, T, R, B, S, L, N, U, W, C, Platinel Ⅱ
RTD Pt100Ω, JPt100Ω
Analog Voltage Input -10~20mV, 0~100mV, 0.4~2.0V DC, 1~5V DC, 0~10V DC
Output
Control Output RELAY, SSR(Voltage Pulse)Current Output 4 ~ 20mA DCVoltage Output -Transmission Output 4 ~ 20mA (PV, SP, MV)
DigitalInput
Contact Type 2 Points / 4 Types(RUN, HOLD, STEP, RESET)
Contact capacity -
DigitalOutput
RelayNormal Open 30V DC A, 250V AC 1ANormal Close 30V DC3A 250V AC 3A
Open CollectorON voltage across contacts at less than 2V, the leakage current less than 100
Sampling Time 250ms
Accuracy ±0.1% ±1% digit of Full Scale
EVENT
Alarm 1 Point / Max 3 Points(20 Types)
Inner Signal 2 Points (PV, SP, TSP)Time Signal 1 Point
Other 1 Point (RUN, Pattern END, UP, DOWN, SOAK)
Communication
Interface RS485
Protocol PC-Link, MODBUS(ASCII , RTU), SYNC(Master, Slave)
Speed Max 19,200 bps
PowerPower 100 ~ 240V AC, 50 ~ 60HzPower Consumption Max 6W
Operating environment -Weight -
22
www.labker.hu
OPTIONS(6CH Digital Recorder)
• Support large capacity of S.D card• Various types of displaying screen• Alarm setup within each channel, support 4 contacts• Multi inputs (thermo couple, RTD, and etc )• Communication: ETHERNET, USB, RS232, and RS485/422
Suffix codeModel Code Information
GR100- Graphic recorder(applied touch panel function) 145(W) × 145(H) mm
Inputchannel
1 6 channels2 12 channels
Communicationspecification
0 RS232 + RS485/422 + USB
1 RS232 + RS485/422 + USB + (ETHERNET : on the development)
Model GR100W × H × D (mm) 14 × 145 × 181
Function
Multi-input, Horizontal/Vertical scroll, Bar, History(Magnification/Scale-down)Reading mode,
6 or 12 channels, 6 or 12 contact output.
4 alarm for each channel, Various computing, RS232, RS422/485, USB, ETHERNET communication
MMI 5.6 inch color / Touch panel
Input
Sampling cycle : 1 sec / channel Accuracy : ± 0.1 % of F.S
Permissible signal source resistance : Max. 250 Ω
Permissible wiring resistance : RTD : Below 10 wire(But the resistance of the 3 wires should be the same)
RTD : Min. 10 , Thermocouple : V d.c : Min. 1
Computing functionComputing, Function, Conversion : +, -, ×, ÷, ABS(), SQRT(),SIN(), COS(), TAN(), LOG10(), %R.H. Conversion, ˚F Conversion
Contact input Contact Specification : 6 points Capacity : Max. 24 V d.c 10 mA Contact operation : RECORD / STOP, ALARM
Contact outputContact Specification : GR100-1X : 6 points, GR100-2X : 12 pointsCapacity : Normal Open (Max. 30 V d.c / 5 A, 250 V a.c / 5 A)Contact type : ALARM, BURNOUT, D/I
CommunicationProtocol : GR100-x1 : MODBUS-RTU, GR100-x2 : MODBUS-RTU, MODBUS on TCPType : GR100-x1 : RS232C, RS422/485, USB V1.1, GR100-x2 : RS232C, RS422/485, USB V1.1, ETHERNET TCP/IP
MemoryInternal memory : SD-RAM(Volatile) : Max. 12 hours(interval 1 sec), FLASH(non-volatile) : operation setting storageExternal memory : SD CARD(non-volatile) : Possible storage for 1 year when you use 1GB (interval 2 sec.)Recording contents : Measuring or computing value for each channel, Burn-out, D/I, Alarm, Relay out
Power supply Power voltage / Frequency : 100 - 240 V a.c Voltage variable ratio : ± 10 % / 50 - 60
Operation environment Temperature : 0 ~ 50 ˚C Humidity : 20 ~ 80 % R.H. (5 ~ 40 ˚C) No condensation
Storage environment Temperature : -25 ~ 70 ˚C Humidity : 5 ~ 95 % R.H. No condensation
23
www.labker.hu
OPTIONS(Hybrid Recorder)
• 50mm thermal transfer method of paper recorder• Data logger function for recording without paper• Supports RS485 communication and dedicated communication port
to set or monitor parameters in real-time by PC/PLC• Multi-input with high accuracy 0.2% level(RTD, TC, Analog)• 2-channel simultaneous recording in graphic mode and digital
mode• High visibility and easy setting by LCD dot matrix• Supports various option I/O function• Small size(W96×H96×L100 mm), light weight
Record accuracy ±0.5%F.S.
Alarm output CH1(AL1, AL2), CH2(AL1, AL2) Relay output(250 VAC/30 VDC 3 A 1 a)
Alarm output hysteresis ON/OFF interval setting for alarm output: 1 to 999digit variable
Communication output RS485 communication output(Modbus RTU protocol)
Set method Setting by front keys
Sampling cycle 500 ms/channel x 2 channels = 1000 ms
Dielectric strength 2300 VAC 50/60 Hz for 1 min.(charging terminal of the other polarity)
Vibration0.75 mm amplitude at frequency of 10 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 1 hour
Relay life cycle Mechanical: Over 5,000,000 operations, Electrical: Over 100,000 operations
Insulation resistance Over 100 MΩ (at 500 VDC megger)
Noise resistance Square shaped noise by noise simulator (pulse width 1 )±2 kV
Method Direct thermal line print
Resolution 8 dot/mm
Dots 384 dot/Line
Life cycle 50 km
Record
Graphic mode• Record speed(recording paper speed): 10, 30, 60, 120, 240, 480, 940 mm/hour• Memo cycle: 30 s, 1 m, 5 m, 10 m, 15 m, 30 m, 1 h, 2 h, 3 h, 4 h, 8 h, 16 h, 24 h
Digital mode TEXT mode record cycle: 00 m 05 s to 99 m 59 s
Paper Thermal Direct Receipt Paper (57 mm x 16 m)
Paper supply method
Clamshell Type
Language Korean, English
Environment
Ambient temperature
0 to 50 , storage: -20 to 60
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Approval CE
Unit weight Approx. 700 g
24
www.labker.hu
Custom-made Production
Throughout cost effective manufacturing, flexible systems, accumulated technical knowhow and experienced design teams, SamHeung’s sophisticated and flexible manufacturing facility provides our customers a variety of Custom-made Production to satisfy their diverse requirements.
25
www.labker.hu
Custom-made Production
26
www.labker.hu