1WWW.TORMACH.COM

TORMACH PRODUCT DATASHEET

T-Slot Clamps, T-Nuts, and Fixture Plates

WORKHOLDING

T-Slot Clamps and hold downs are essential items for any CNC workshop. Use these to secure vises, or attach workpieces and fixture plates directly to the table, as well as solve many other workholding problems. Tormach offers a variety of T-slot clamp kits and accessories to fit 5/8” T-slot tables.

58 PC Pro Quality Steel Clamp SetOur 5/8” T-Slot Clamp Sets include essential hold downs for your small CNC clamp needs, including 5/8” T-Nuts, strap clamps, riser blocks, studs, and flanged nuts. Use these to clamp vises, fixtures, or vacuum tables directly to your mill table. Includes assortment of T-nuts, Studs, Strap Clamps, and Flange Nuts with Wrench and Slot Cleaner.• T-nuts fit standard 5/8” T-slots• 1/2-13 Studs• Suitable for both PCNC 1100 and PCNC 770

PN 32580 58 PC PRO QUALITY STEEL CLAMP SET

Specialty 5/8” T-NutsSpecialty 5/8” T-Nuts are handy tools for part and fixture locating when working with thin and/or large workpieces.

PN 31957 5/8” T-NUT

PN 31855 5/8” T-NUT WITH LOCATING PIN

(BLIND)

PN 31856 5/8” T-NUT WITH LOCATING PIN

PN 31857 5/8” T-NUT WITH LOCATING STOP

PN 32410 T-SLOT CLAMP SET

PN 31958 1/2-13 FLANGED NUT

T-SLOT CLAMPS, T-NUTS

PN 31857PN 31855

PN 31856 PN 32410

2WWW.TORMACH.COM

TORMACH PRODUCT DATASHEET

T-Slot Clamps, T-Nuts, and Fixture Plates

WORKHOLDING

Adjustable U-Clamp SetBrass-footed U-Clamp Set for securing workpieces to mill table. Set includes 2 Clamps and 5/8” T-slot nuts and studs. • Cast Iron Clamps with Pivoting Brass Feet• 1.75” x 0.5” Clamping Area• Adjustable Height: 0”-2.3” (0-60mm)• Includes 5/8” Hardware: Studs, T-nuts, Flange Nuts,

and Pivots (2 pieces per each item)

PN 32575 ADJUSTABLE U-CLAMP SET

Aluminum Fixture PlatesThese fixture plates are made from mill thickness 10mm aluminum plate.* Designed as a low cost, disposable option over more expensive Blanchard ground plates.• 10mm Thickness (mill finish, not ground)• 1/2” Locating Slots

PN 32624 Aluminum Fixture Plate, 20” x 9.5” x 10mm (Fits working envelope of PCNC 1100)

PN 32836 Aluminum Fixture Plate, 18” x 8” x 10mm (Fits working envelope of PCNC 770)

Aluminum Pivot PlateThis fixture plate is made from mill thickness 10mm aluminum plate.* Designed as a low cost, disposable option over more expensive Blanchard ground plates; can be pivoted about locating pins to effectively extend working area.• 18” x 18” (fits PCNC 1100)• 10mm Thickness (mill finish, not ground)• 1/2” Locating Holes

PN 31871 Aluminum Pivot Plate, 18” x 18” x 10mm

*These plates are not finish ground, and are intended to be surfaced on the mill for final flatness.

5” and 6” Parallel Sets• 10 Pairs Each Set• 1/2” to 1 5/8” Tall in 1/8” Increments, 1/8” Thick

PN 32799 5” Parallel Set

PN 31951 6” Parallel Set

3WWW.TORMACH.COM

TORMACH PRODUCT DATASHEET

T-Slot Clamps, T-Nuts, and Fixture Plates

WORKHOLDINGABOUT TORMACHThe people at Tormach are dedicated to delivering tools, accessories, and components of unprecedented value in the world of CNC and moti on control. Whether you’re involved in R&D, educati on, short run producti on, or simply an entrepreneur with an idea, you need to make things. Tormach products allow you to make what you need easier, quicker, and more aff ordably. We want to help make your goal a reality, to enable your ideas. Our mission is to empower people who make things. Whether you’re cutti ng parts with our machine tools or building your own equipment using our components, our focus is to manifest your concepts and help you bring your ideas into reality.

ORDERING, PAYMENT & SHIPPINGQuotati ons can be requested online using our web based quotati on system, or through FAX, email, or over the phone. Machines and accessories can also be ordered using our secure web shopping cart. Payment can be made by check, credit card, or wire transfer. Machines and machine stands are shipped via truck freight in North America, while accessories are normally shipped via package service (UPS, USPS, FedEx). Tormach ships worldwide in cooperati on with established internati onal freight forwarding companies.

WARRANTY AND SUPPORTMachines and accessories are warranted for 12 months. Warranty service is limited to repair or replacement of components with telephone support, there is no on-site fi eld service staff . Replacement parts are stocked at our Wisconsin facility. Additi onal informati on is available at www.tormach.com.

ENABLING YOUR IDEAS204 Moravian Valley Road, Suite NWaunakee, WI 53597 USAPh 608.849.8381 • Fx 209.885.4534info@tormach.com

COPYRIGHT TORMACH LLC 2013

SPECIFICATIONS ARE SUBJECT TO CHANGE

WITHOUT NOTICE

DS10127_WH_FIxTURE_PLATES_0613A.PDF

JULY, 22 2013