ds4400m_supportmatrrix

EMC Support MatrixInteroperability ResultsP/N 300-000-166ECO 36106 Rev B30

Table of ContentsCopyright EMC Corporation 2010...................................................................................................................................................................................................1

EMC's Policies and Requirements for EMC Support Matrix........................................................................................................................................................2

Switched Fabric Topology Parameters.........................................................................................................................................................................................4

i

Copyright EMC Corporation 2010

Copyright © 2001, 2010 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS". EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANYKIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

Trademark Information

EMC2, EMC, EMC ControlCenter, AlphaStor, ApplicationXtender, Catalog Solution, Celerra, CentraStar, CLARalert, CLARiiON, ClientPak, Connectrix,Co-StandbyServer, Dantz, Direct Matrix Architecture, DiskXtender, Documentum, EmailXtender, EmailXtract, HighRoad, Legato, Legato NetWorker,Navisphere, OpenScale, PowerPath, RepliStor, ResourcePak, Retrospect, Smarts, SnapShotServer, SnapView/IP, SRDF, Symmetrix, TimeFinder, VisualSAN,VSAM Assist, Xtender, Xtender Solutions, and where information lives are registered trademarks and EMC Developers Program, EMC OnCourse, EMCProven, EMC Snap, EMC Storage Administrator, Access Logix, ArchiveXtender, Authentic Problems, Automated Resource Manager, AutoStart, AutoSwap,AVALONidm, C-Clip, Celerra Replicator, Centera, CLARevent, Codebook Correlation Technology, Common Information Model, CopyCross, CopyPoint,DatabaseXtender, Direct Matrix, DiskXtender 2000, EDM, E-Lab, EmailXaminer, Enginuity, eRoom, FarPoint, FLARE, FullTime, Global File Virtualization,Graphic Visualization, InfoMover, Invista, MirrorView, NetWin, NetWorker, OnAlert, Powerlink, PowerSnap, Rainfinity, RecoverPoint, RepliCare, SafeLine, SANAdvisor, SAN Copy, SAN Manager, SDMS, SnapImage, SnapSure, SnapView, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix DMX,UltraPoint, Viewlets, VisualSRM, and WebXtender are trademarks of EMC Corporation. All other trademarks used herein are the property of their respectiveowners.

Copyright EMC Corporation 2010 1

EMC's Policies and Requirements for EMC Support Matrix

EMC's Support Matrix Policies and Requirements

This section describes EMC's policies and requirements for the EMC Support Matrix document.

Purpose and Limitations of this Document

This document is being provided for informational purposes only and may change at any time. This version supercedes and replaces all previous versions. Theinformation is to serve only as a guide for those configurations/products which EMC has qualified. This document identifies and lists various vendor hostsystems and integral components that have been tested and qualified by EMC for use with EMC products. Vendor components include, but are not limited to,host operating systems, HBAs (host bus adapters) and associated drivers, firmware and BIOS; Fibre Channel switches, hubs and bridges. This document alsolists various vendors, cluster software, tape hardware, storage system boot procedures, heterogeneous information storage, and configurations that EMC hastested and/or qualified for use with EMC products.

The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resourcefor system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation, suchas EMC's Host Connectivity Guides, EMC Networked Storage Topology Guide, EMC CLARiiON Open Systems Configuration Guide, relevant vendordocumentation, or contact your EMC Sales or EMC Customer Service representative.

For Symmetrix 4.x support, please look at the Symmetrix 8000 Series section and check the footnotes for model/microcode compatibility. EMC employees canobtain older revisions of ESM containing more Symmetrix 4.x information from the Symmetrix Service Readiness group.

For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To reportany issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. ForE-Lab Interoperability Navigator access through Powerlink:http://powerlink.emc.com/community/tools/index.jhtml?community_id=2&categoryId=esn_builder&categoryName=E-Lab+Navigator. For access through Avatar:http://avatar.eng.emc.com/Avatar.asp.

Policies for Qualifying Systems

Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to systemconfigurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document arenot qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and hostsystems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Servicerepresentative for updates or information not included in this document.

EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and tosimulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.

Policy for Future Qualification of Operating System Software Releases

The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in orderto be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC maytest and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation, contactyour EMC Sales or EMC Customer Service representative.

Policy for End-of-Life Support

EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after thevendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, andcomponents that the vendor has officially declared to have reached end of life as long as support is available from the vendor.

Your Selections:Switch EMC Connectrix DS-4400M

Relevant Documentation or Links

Host Environment Analysis Tool(HEAT)

This is the Support landing page for the Host Environment Analysis Tool (HEAT), an Environmental AnalysisTool. Available under Support > Product and Diagnostic Tools > Environment Analysis Tools

EMC's Policies and Requirements for EMC Support Matrix 2

http://powerlink.emc.com


EMC Powerlink Up-to-date technical documents about EMC's products and services, including microcode release notes, productmanuals, software release notes and more. See the "Quicklinks" section of the Powerlink home page.

E-Lab Issue Tracker Up-to-date information on EMC product issues that could have an impact on your operations. See the "Tools"section of the Powerlink home page.

EMC's Policies and Requirements for EMC Support Matrix

EMC's Policies and Requirements for EMC Support Matrix 3



Switched Fabric Topology Parameters

For single fabrics consisting of McData and Brocade directors/switches & for single fabrics consisting of Cisco MDS, and Brocade, and McDATAdirectors/switches, see the EMC Networked Storage Topology Guide on E-Lab Interoperability Navigator (http://elabnavigator.emc.com).

Server / HBA model limitations are subject to switch support as listed in Fibre Connectivity: Switch table. EMC recommends the latest code revisions beused on all fabrics.

Switch Interoperability describes the limitations for a mixed Fibre Channel switched fabric topology. The fabric topology envelope limitations and theswitch management applications are defined in the attribute columns.

The following is an example showing how to utilize the table:

1. The objective of this example are to construct a SAN consisting of three switches, A, B, and C, and to verify firmware and management applicationcompatibility. In this case you need to verify that each of these components interoperates with the other two.

2. As the data shows, devices listed in the Switch column can be the same SAN with devices listed in the Interoperable Switch column. For example:switch A running firmware X can interoperate with switch B running firmware Y, and switch A running firmware X can interoperate with switch C runningfirmware Z.

3. In order to verify that switch B running firmware Y can also interoperate with switch C running firmware Z, find switch B in the Switch column and switchC in the Interoperable Switch column. These two steps verify that all three firmware levels are compatible with each other.

For McData switches and directors, Single Mode optics support 10km, 20km, and 35km distance switch to switch.

For Brocade switches and directors, Single Mode optics support 10km, 20km, and 35km distance switch to switch.

OEM equivalents of switches listed in this table are supported by EMC as long as the installed firmware and all other configuration parameters are inaccordance with switches specified in this table.

Unless otherwise noted, all ESM supported switch ports can accommodate a mix of EMC supplied/supported Long Wave and Short Wave optics,provided that each link segment utilizes the same optical technology.

All currently GA EMC Fibre Channel attached storage array microcode levels that have not gone end-of-service-life are supported with listed switchfirmware revisions unless otherwise noted.

No. Switch

SwitchFirmwareRevision

SwitchManagementApplication

Revision Interoperable Switch

InteroperableSwitch

Firmware

Max #Domains

perFabric

Max #Hops

ISLDomain

toDomain Comments Topology

1 EMCConnectrixDS-4400M

9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)

Brocade 24000, Brocade 3250,Brocade 3850

v5.3.1b 31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade 24000, Brocade 3250,Brocade 3850, EMC ConnectrixDS-16B3 , EMC ConnectrixDS-8B3 , EMC ConnectrixED-24000B

v5.0.4a, v5.0.5,v5.1.0d, v5.2.0a

24 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco Fabric

Brocade 3006, Brocade 51006,15, Brocade 53006, 15

v6.1.2b, v6.2.1b,v6.2.2b, v6.3.0b,v6.3.0c, v6.3.1a,v6.3.2a

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12

Switched Fabric Topology Parameters 4

http://elabnavigator.emc.com

9.09.07,9.09.08

Manager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade 780023, EMCConnectrix MP-7800B 24

v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade DCX-4S24, 25, 26, 27 v6.2.0g, v6.2.1b,v6.2.2b, v6.3.0b,v6.3.0c, v6.3.1a,v6.3.2a

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade Encryption Switch 19,20, 21, 22

v6.2.0g, v6.2.2b,v6.3.0c, v6.3.1a,v6.3.2a, v6.4.0b

31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco MDS 9120, Cisco MDS9140, Cisco MDS 9216, CiscoMDS 9216A , Cisco MDS 9216i

3.0.2a 24 3 8 See1, 2, 3, 4 FC-SW12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,Connectrix


3.1.2 16 3 8 See1, 2, 3, 4 FC-SW



Manager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08



3.2.1a, 3.2.2c,3.3.1c

31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco MDS 9124, Cisco MDS9134, Cisco MDS 9148, CiscoMDS 9222i , Cisco MDS 9506,Cisco MDS 9509, Cisco MDS9513

5.0.1a 31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco MDS 9124, Cisco MDS9148, Cisco MDS 9506, CiscoMDS 9509, Cisco MDS 9513

5.0.1a 16 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco MDS 9506, Cisco MDS9509, Cisco MDS 9513

5.0.1a 24 3 8 See1, 2, 3, 4 FC-SW12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco NEX-501045, CiscoNEX-502045

4.0(1a)N1(1a)43,44, 4.1(3)N1(1)43,44, 4.1(3)N2(1),4.1(3)N2(1a),4.2(1)N1(1),4.2(1)N2(1)

31 5 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,

Cisco UCS 6120XP 54, 55 4.0(1a)N2(1.1e) ,4.0(1a)N2(1.2),

31 5 8 See1, 2, 3, 4 FC-SW11,12



9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)

4.1(3)N2(1.1),4.1(3)N2(1.2b),4.1(3)N2(1.3(1i)) , 4.1(3)N2(1.3(1m)) , 4.1(3)N2(1.3(1n)) ,4.1(3)N2(1.3c)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Cisco UCS 6140XP 54, 55 4.1(3)N2(1.1),4.1(3)N2(1.2b),4.1(3)N2(1.3(1i)) , 4.1(3)N2(1.3(1m)) , 4.1(3)N2(1.3(1n)) ,4.1(3)N2(1.3c)

31 5 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 1/2Gb FC SwitchModule (SW3014) , DigitalHenge Brocade 2-PortEnterprise Switch Module(SBCEBFCSW) , LangChaoBrocade 2-Port EnterpriseSwitch Module (SBCEBFCSW)

v5.3.0c, v5.3.0d,v5.3.1

8 2 4 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 4Gb FC SwitchModule (SW4016) as AccessGateway , Dell Brocade 4Gb FCSwitch Module (SW4424) asAccess Gateway , HewlettPackard Brocade 4/12 SANSwitch for HP c-ClassBladesystem (AE370A) asAccess Gateway , HewlettPackard Brocade 4/24 SANSwitch Power Pack for HPc-Class Bladesystem (AE371A)as Access Gateway , HewlettPackard Brocade 4Gb SANSwitch for HP p-ClassBladeSystem, Power Pack(A7535A) as Access Gateway ,IBM Brocade 10-port 4Gb SANSwitch Module for IBMBladeCenter Servers(32R1813/32R1821) as AccessGateway , IBM Brocade 20-port4Gb SAN Switch Module for IBMBladeCenter Servers(32R1812/32R1820) as AccessGateway

v5.3.2, v5.3.2c,v6.0.1a, v6.1.0j,v6.1.2, v6.1.2b,v6.2.0g, v6.2.1b

31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 4Gb FC SwitchModule (SW4016) , DellBrocade 4Gb FC Switch Module(SW4424) , Hewlett PackardBrocade 4/12 SAN Switch forHP c-Class Bladesystem(AE370A) 7, Hewlett PackardBrocade 4/24 SAN SwitchPower Pack for HP c-ClassBladesystem (AE371A) , HewlettPackard Brocade 4/24 SANSwitch for HP c-ClassBladesystem (AE372A) , HewlettPackard Brocade 4Gb SANSwitch for HP p-ClassBladeSystem, Power Pack(A7535A) , IBM Brocade 10-port4Gb SAN Switch Module for IBMBladeCenter Servers(32R1813/32R1821) 35, IBM

v5.3.2, v5.3.2c,v6.0.1a, v6.1.0j,v6.1.2, v6.1.2b,v6.2.0g, v6.2.1b

31 5 8 See1, 2, 3, 4 FC-SW



Brocade 20-port 4Gb SANSwitch Module for IBMBladeCenter Servers(32R1812/32R1820) 35


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 8Gb FC SwitchModule (M5424)(SW5424)

v6.1.0j, v6.1.2,v6.1.2b, v6.2.0g,v6.2.1b, v6.3.0b,v6.3.0c

31 5 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 8Gb FC SwitchModule (M5424)(SW5424) asAccess Gateway

v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b

31 5 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell M5424-n Brocade 8/4GbFC SAN Module

v6.4.0b 31 5 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell McDATA FC Switch Module(SW4314)

5.2.0.27, 5.2.0.34 8 2 4 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell McDATA FC Switch Module(SW4416)

5.2.3.14, 5.2.3.15 8 2 4 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,

Dell Optical Pass-thru Module(J6780) , Hewlett Packard HP4Gb FC Pass-Thru Module for

N/A 16 3 4 See1, 2, 3, 4 FC-SW11,12



9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)

c-Class Bladesystem(403626-B21) , IBM OpticalPassthrough Module For IBMBladeCenter Servers(02R9080/02R9082) , IBMOptical Passthrough Module ForIBM BladeCenter Servers(39Y9316) 35, NEC 2/4GB FCPass-Through Module(N8406-021) , NEC 4GB FCPass-Through Module(N8406-030)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Optical Pass-thru Module(PT1016)

N/A 24 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Digital Henge Brocade 4Gb SANSwitch Module (SBCEBFCSW4), Fujitsu Technology SolutionsFC Switch Blade(S26361-F3144) , LangChaoBrocade 4Gb SAN SwitchModule (SBCEBFCSW4)

v5.3.1, v5.3.1b,v6.0.0c, v6.0.1a,v6.1.0c

31 5 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix DS-24M2 ,EMC Connectrix DS-32M2 ,EMC Connectrix DS-4400M ,EMC Connectrix DS-4700M ,EMC Connectrix ED-140M 10,EMC Connectrix ED-64M 9,McDATA ED-60649, McDATAED-614010, McDATA ES-3232,McDATA ES-43008, McDATAES-4400, McDATA ES-4500,McDATA ES-4700

9.07.02, 9.08.01,9.09.02, 9.09.03,9.09.05, 9.09.06,9.09.07, 9.09.08

24 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix DS-24M2 ,EMC Connectrix DS-32M2 ,EMC Connectrix DS-4400M ,EMC Connectrix DS-4700M ,EMC Connectrix ED-140M 10,EMC Connectrix ED-64M 9,McDATA ED-60649, McDATAED-614010, McDATA ES-3232,McDATA ES-43008, McDATAES-4400, McDATA ES-4500,McDATA ES-4700

9.07.02, 9.08.01,9.09.02, 9.09.03,9.09.05, 9.09.06,9.09.07, 9.09.08

31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,

EMC Connectrix DS-24M2 ,EMC Connectrix DS-32M2 ,EMC Connectrix DS-4400M ,EMC Connectrix DS-4700M ,EMC Connectrix ED-140M 10,EMC Connectrix ED-64M 9,McDATA ED-60649, McDATAED-614010, McDATA ES-3232,McDATA ES-43008, McDATAES-4400, McDATA ES-4700

9.07.02, 9.08.01,9.09.02, 9.09.03,9.09.05, 9.09.06,9.09.07, 9.09.08

31 3 16 See1, 2, 3, 4, 33 FC-SW



ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix DS-24M2 ,EMC Connectrix DS-32M2 ,EMC Connectrix DS-4400M ,EMC Connectrix ED-140M 10,EMC Connectrix ED-64M 9,McDATA ED-60649, McDATAED-614010, McDATA ES-3232,McDATA ES-4500

9.07.02, 9.08.01,9.09.02, 9.09.03,9.09.05, 9.09.06,9.09.07, 9.09.08

31 3 16 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix DS-300B 6,EMC Connectrix DS-5100B 6,15, EMC Connectrix DS-5300B6, 15

v6.1.2b, v6.2.1b,v6.2.2b, v6.3.0b,v6.3.0c, v6.3.1a

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix ED-10000M ,McDATA Intrepid 10000 42

9.09.03, 9.09.05,9.09.06, 9.09.08

24 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix ED-10000M ,McDATA Intrepid 10000 42

9.09.03, 9.09.05,9.09.06, 9.09.08

31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix ED-DCX-4S-B24, 25, 26, 27

v6.2.0g, v6.2.1b,v6.2.2b, v6.3.0b,v6.3.0c, v6.3.1a,v6.3.2a, v6.4.0b

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12

35 31 3 8 See1, 2, 3, 4, 14



EMCConnectrixDS-4400M

9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix ES-5832B 19,20, 21, 22

v6.2.0g, v6.2.2b,v6.3.0c, v6.3.1a,v6.3.2a, v6.4.0b

FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix MP-7500B 41 v5.3.2, v5.3.2c,v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b

31 3 8 See1, 2, 3, 4, 40 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Fujitsu Ltd. FC Switch BladeBR5450

v6.2.0_fuj,v6.2.2b, v6.3.1a,v6.3.2a, v6.4.0b

31 5 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Fujitsu Technology SolutionsPass Thru Blade(S26361-F3024) , HewlettPackard Proliant BL p-Classpatch panel [FC Pass-through](306465-B21) 52

N/A 16 3 4 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard Brocade 4/24SAN Switch for HP c-ClassBladesystem (AE372A) asAccess Gateway

6.0.1a, v5.3.2,v5.3.2c, v6.0.1a,v6.1.0j, v6.1.2,v6.1.2b, v6.2.0g,v6.2.1b

31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command Line

Hewlett Packard Brocade 8GbSAN Switch for HP c-ClassBladesystem(AJ820A/AJ821A/AJ822A)

v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a

31 5 8 See1, 2, 3, 4 FC-SW



Interface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard Brocade 8GbSAN Switch for HP c-classBladesystem as AccessGateway

v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a

31 5 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard CiscoMDS9124e SAN Switch for HPc-Class BladeSystem

3.3.1c, 3.3.2,3.3.3, 3.3.4,4.1.1b, 4.1.3a,4.2.1a, 4.2.3,5.0.1a

31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard CiscoMDS9124e SAN Switch for HPc-Class BladeSystem - NPVMode

3.3.1c, 3.3.2,3.3.3, 3.3.4,4.1.1b, 4.1.3a,4.2.1a, 4.2.3,5.0.1a

24 3 8 See1, 2, 3, 4, 13 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard HP 4Gb VirtualConnect FC Module for c-ClassBladesystem (409513-B21) 46

1.30, 1.32, 1.40 24 3 8 See1, 2, 3, 4, 13 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic

Hewlett Packard HP 4Gb VirtualConnect FC Module for c-ClassBladesystem (409513-B21) 46,Hewlett Packard HP VirtualConnect FC Module for c-ClassBladesystem (409513-B22)

1.30, 1.32, 1.40 24 3 8 See1, 2, 3, 4, 13 FC-SW11,12



(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard HP 8Gb VirtualConnect FC Module for c-ClassBladesystem (466482-B21)

1.00, 1.01 24 3 8 See1, 2, 3, 4, 13 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard HP 8Gb VirtualConnect FC Module for c-ClassBladesystem (572018-B21)

1.40 24 3 8 See1, 2, 3, 4, 13 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Hewlett Packard McData 4GbSAN Switch for HP p-ClassBladeSystem (A8001A) 37

6.4.0.08, 6.4.0.11 24 3 2 See1, 2, 3, 4, 36 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Huawei Brocade 4Gb FC SwitchModule (SW4018)

v6.0.0b 31 3 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


IBM 32R1833, IBM 32R1905 5.5.2.0556 31 3 6 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco Fabric

IBM Brocade Enterprise SANSwitch Module For IBMBladeCenter Servers(90P0165/90P0164)

v5.3.0a, v5.3.0c,v5.3.0d, v5.3.1

8 2 4 See1, 2, 3, 4 FC-SW



9.09.07,9.09.08

Manager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


IBM McData 10-Port 4GB FCSwitch Module for IBMBladeCenter Servers(32R1905/32R1911) 35, IBMMcData 20-Port 4GB FC SwitchModule for IBM BladeCenterServers (32R1833/32R1836) 35,IBM McData 6-Port SwitchModule For IBM BladeCenterServers (32R1790) , IBM QLogic10-Port 4GB FC Switch modulefor IBM BladeCenter Servers(32R1904/32R1910) 35, IBMQLogic 20-Port 4GB FC Switchmodule for IBM BladeCenterServers (26R0881/26R0888) 35,IBM QLogic 6-Port SwitchModule For IBM BladeCenterServers (26K6477/26K6481)

5.5.2.1038 31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


IBM McData 10-Port 4GB FCSwitch Module for IBMBladeCenter Servers(32R1905/32R1911) 35, IBMMcData 20-Port 4GB FC SwitchModule for IBM BladeCenterServers (32R1833/32R1836) 35,IBM McData 6-Port SwitchModule For IBM BladeCenterServers (32R1790) 36, 37

5.5.1.10, 5.5.2.05 24 3 6 See1, 2, 3, 4, 34 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


IBM QLogic 4Gb IntelligentPassthrough Module for IBMBladeCenter (43W6723) 16, 17

v6.5.0.17 24 3 8 See1, 2, 3, 4, 13 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


McDATA Intrepid 10000 42 9.09.03, 9.09.05,9.09.06, 9.09.08

31 3 16 See1, 2, 3, 4, 33 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,Connectrix

NEC 12-Port 4GB FC SwitchModule (N8406-019) , NEC24-Port 4GB FC Switch Module(N8406-020)

v5.0.5b, v5.2.1b,v5.3.0d

8 2 4 See1, 2, 3, 4 FC-SW



Manager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


NEC 12-Port 8Gb FC SwitchModule (Brocade NC-5480)(N8406-040) , NEC 24-Port 8Gb FCSwitch Module (Brocade NC-5480)(N8406-042)

v6.3.2a 31 5 8 See1, 2, 3, 4 FC-SW


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 18,EFCM Basic(EWS)

Brocade 200E, EMC ConnectrixDS-220B

v6.1.0j, v6.1.2b,v6.2.0g, v6.2.1b,v6.2.2b

24 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade 200E, EMC ConnectrixDS-220B

v6.1.0j, v6.1.2b,v6.2.0g, v6.2.1b,v6.2.2b

31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade 4100, Brocade4800028, 29, 30, 31, Brocade4900, Brocade 5000, EMCConnectrix DS-4100B , EMCConnectrix DS-4900B , EMCConnectrix DS-5000B , EMCConnectrix ED-48000B 28, 29, 30,31, 32

v5.3.2, v5.3.2c,v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b

31 3 8 See1, 2, 3, 4 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade 4100, Brocade 4900,EMC Connectrix DS-4100B ,EMC Connectrix DS-4900B

v5.3.2, v5.3.2c,v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b

24 3 8 See1, 2, 3, 4 FC-SW11,12

62 EMCConnectrix

9.07.02,9.08.01,

CMDCE 10.1.16,CMDCE 10.1.4,

Brocade 750041 v5.3.2, v5.3.2c,v6.1.2b, v6.2.0g,

31 3 8 See1, 2, 3, 4, 40 FC-SW11,12



DS-4400M 9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08

CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 18,EFCM Basic(EWS)

v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade AP7600 v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0c, v6.3.1a,v6.3.2a

31 3 8 See1, 2, 3, 4,47, 48, 49, 50,51

FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Brocade DCX15, 24, 25, 27, 53,EMC Connectrix DS-300B ,EMC Connectrix DS-5100B 15,EMC Connectrix DS-5300B 15,EMC Connectrix ED-DCX-B 15,24, 25, 27, 53

v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a,v6.4.0b

31 3 8 See1, 2, 3, 4, 14 FC-SW11,12


9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


EMC Connectrix AP-7600B v6.1.2b, v6.2.0g,v6.2.1b, v6.2.2b,v6.3.0b, v6.3.0c,v6.3.1a, v6.3.2a

31 3 8 See1, 2, 3, 4,47, 48, 49, 50,51

FC-SW11,12

66 EMCConnectrixDS-4400M13, 39

9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


Dell Brocade 4Gb FC SwitchModule (SW4016) as AccessGateway , Dell Brocade 4Gb FCSwitch Module (SW4424) asAccess Gateway , HewlettPackard Brocade 4/12 SANSwitch for HP c-ClassBladesystem (AE370A) asAccess Gateway , HewlettPackard Brocade 4/24 SANSwitch Power Pack for HPc-Class Bladesystem (AE371A)as Access Gateway , HewlettPackard Brocade 4Gb SANSwitch for HP p-ClassBladeSystem, Power Pack(A7535A) as Access Gateway ,IBM Brocade 20-port 4Gb SANSwitch Module for IBMBladeCenter Servers(32R1812/32R1820) as AccessGateway

v5.3.2, v5.3.2c,v6.0.1a, v6.1.0j,v6.1.2, v6.1.2b,v6.2.0g, v6.2.1b

31 5 8 See1, 2, 3, 4 FC-SW11,12

67 EMCConnectrixDS-4400M13, 39

9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,

CMDCE 10.1.16,CMDCE 10.1.4,CMDCE 10.3.35,CMDCE 10.3.4,CMDCE 10.4.3,

Hewlett Packard Brocade 4/24SAN Switch for HP c-ClassBladesystem (AE372A) asAccess Gateway

6.0.1a, v5.3.2,v5.3.2c, v6.0.1a,v6.1.0j, v6.1.2,v6.1.2b, v6.2.0g,v6.2.1b

31 5 8 See1, 2, 3, 4 FC-SW11,12



9.09.06,9.09.07,9.09.08

Cisco FabricManager ,Command LineInterface ,ConnectrixManager 9.7.2 ,ConnectrixManager 9.7.3 ,ConnectrixManager 9.7.4 ,EFCM Basic(EWS)

68 EMCConnectrix:DS-4400M,DS-4400M13,39

9.07.02,9.08.01,9.09.02,9.09.03,9.09.05,9.09.06,9.09.07,9.09.08


IBM Brocade 10-port 4Gb SANSwitch Module for IBMBladeCenter Servers(32R1813/32R1821) as AccessGateway

v5.3.2, v5.3.2c,v6.0.1a, v6.1.0j,v6.1.2, v6.1.2b,v6.2.0g, v6.2.1b

31 5 8 See1, 2, 3, 4 FC-SW11,12

1. Switch Management Application Revision: Switch Management versions are backward compatible. You may manage any lower-level switch with a higher level ManagementApplication Revision.

2. Max # of Domains per Fabric: The maximum number of switches a Fibre Channel fabric may contain under the current topology limitations.3. Switch Management Application Revision: The use of mixed code revisions in the same fabric should be limited to code upgrade processes only. You must always use the

management code rev. associated with the highest level of switch code.4. Max # Hops: The maximum number of ISLs (Inter-Switch Links) a frame needs to traverse between any input port of the fabric to any output port, assuming all ISLs are active (no

ISL or switch fault condition is present). This is the maximum number of hops in a fabric. For additional information regarding how to count the number of hops in a fabric, refer tothe EMC Networked Storage Topology Guide.

5. Firmware version 9.9.3 or higher is required for managing pure M-EOS fabrics. For additional information refer to the release notes.6. CMDCE stands for "Connectrix Manager Data Center Edition"7. HP Part number AE373A is 12 port upgrade license for Brocade 4/12 SAN Switch.8. The minimum firmware revision for the ES-4300 is 5.05.00 (This firmware revision is only to be used on ES-4300)9. Do not attempt to manage an ED-64M containing XPM (10 Gb/sec) port modules with Connectrix Manager 7.x. The XPM requires Connectrix Manager 8.7.1 at a minimum.10. Do not attempt to manage an ED-140M containing XPM (10 Gb/sec) or QPM (4 Gb/sec) port modules with Connectrix Manager 7.x. The XPM requires Connectrix Manager 8.7.1

and the QPM requires Connectrix Manager 8.9.0.11. No Application Blades are currently supported in the 48000 when running in a heterogeneous switch interoperability environment.12. McDATA's "Open Fabric Mode 1.0" and Cisco's "Interopmode 1" are fully supported for McDATA and Cisco interop. Configurations consisting of McDATA's "McDATA Fabric Mode

1.0" and Cisco's "Interopmode 4" are supported when using EOS 9.7.2 and SAN-OS v3.3.1c, and also when using EOS 9.8.1 and NX-OS 4.1.1b. For support of interopmode withprevious versions, submit an RPQ.For a complete list of known issues with McDATA and Cisco interop, see Primus case EMC147089.

13. NPIV License is required for all McData and Connectrix M series switches14. With the "Integrated Routing" feature enabled, this connectivity can be supported with either of the Brocade DCX, DCX-4S, 300, 5100, 5300 or their Connectrix-B series versions

acting as a SAN router. EX ports can be configured on either one of these switches for fibre channel routing.15. The routing feature is available from ESM supported Brocade FOS v6.1.0c onwards. The Brocade Integrated Routing License is required. The switch can act as an FC router

(FCR) only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based scalability limits are provided in the firmware release notes and also apply to allintegrated router based configurations.

16. Direct connection to EMC Storage Arrays are not supported17. This switch module is supported in both legacy switch module positions (bays 3 and 4) of all IBM BladeCenter Chassis and when installed in the IBM Multi-switch Interconnect

Module for IBM BladeCenterTM (39Y9314), in bays 8 and 10 in the IBM BladeCenter H chassis.18. For FOS switch management, CMDCE 10.x is the recommended management tool. If Connectrix Manager is to be used FOS 6.3.x is not supported. v9.7.4 is the minimum version

to be used for FOS 6.2.x. Connectrix Manager 9.7.3 & 9.7.2 can only support FOS 6.1.x and lower.19. Supported for all FC attached storage (Symmetrix, CLARiiON and Celerra)20. It is required that switches attached to hosts and targets or those that are part of the encryption flow be operating with the following minimum specified levels:(a) The 2Gb/4Gb

Brocade/Connectrix B series switches must operate with FOS v5.3.1b or later, and (b)the 4Gb/8Gb Brocade/Connectrix B series switches must operate with FOS v6.1.0e, v6.1.1 orlater (4Gb platforms may use v5.3.1b but are recommended to use the supported v6.x versions)

21. For any encryption support based information, please refer to the Encryption table.22. EMC supports the Brocade Encryption Switch (BES) based encryption for Celerra NAS NDMP backup to physical tape. This solution is not applicable to EMC disk libraries (EDL).

While configuring encryption, please use the CLI. If GUI is used, the WWPN of the Celerra will have to be entered manually.23. The Brocade 7800/Connectrix MP-7800B switch can also be used as an FC SAN router only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based

scalability limits are provided in the firmware release notes.24. The Brocade FX8-24/Connectrix PB-DCX-FX8-24 application blade is supported if the chassis is running FOS v6.3.0b and above.25. The Brocade FS8-18 Encryption blade/Connectrix PB-DCX-16EB blade in the Brocade DCX/ED-DCX-B or in the Brocade DCX-4S/ED-DCX-4S-B is supported for all FC attached

storage (Symmetrix, CLARiiON and Celerra). For any encryption support based information, please refer to the encryption table.26. The routing feature is available from ESM supported Brocade FOS v6.2.0c onwards on ths switch. The Brocade Integrated Routing License is required. The switch can act as an

FC router (FCR) only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based scalability limits are provided in the firmware release notes and alsoapply to all integrated router based configurations.

27. When using the Brocade FS8-18 Encryption blade/Connectrix PB-DCX-16EB blade in the Brocade DCX/ED-DCX-B or Brocade DCX-4S/ED-DCX-4S-B, it is required that switchesattached to hosts and targets or those that are part of the encryption flow be operating with the following minimum specified levels:(a) The 2Gb/4Gb Brocade/Connectrix B seriesswitches must operate with FOS v5.3.1b or later, and(b)the 4Gb/8Gb Brocade/Connectrix B series switches must operate with FOS v6.1.0e, v6.1.1 or later (4Gb platforms may use v5.3.1b but are recommended to use the supportedv6.x versions)

28. The blade for distance extension is PB-48K-18i29. For Recover Point supported firmware versions, the "Frame Redirect" feature cannot be enabled for the Scimitar or FC4-16AP application blade - McData interop connectivity in a

Recover Point set up with the application blade acting as the intelligent switch.30. The 10G FC10-6(Xenon) blade is supported for ISL connectivity from Xenon to Xenon only.31. The 16-port 8Gbit blade (FC8-16) and the 32-port 8Gbit blade (FC8-32) are supported in the Brocade 48000 or EMC Connectrix ED-48000B chassis running supported FOS

v6.0.0c and up.32. The Brocade FR4-18i blade can be configured to be used as an FC SAN router only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based

scalability limits are provided in the firmware release notes.33. A fabric may contain up to 1500 N_Ports if all products are running either EOS 8.00.00 or EOSn 6.03.01.34. ACL zoning is not supported35. This switch module is supported in both legacy switch module position (bay 3 or 4) of all IBM BladeCenter chassis' and when installed in the IBM Multi-switch Interconnect Module

for IBM BladeCenter (39Y9314), in bays 8 and 10 in the IBM BladeCenter H chassis.36. EFCM 8.6 or higher is required for blade discovery37. One of the core fabric switches must be configured to be a principle switch. the blade switches should not acquire the role of principle switch.



38. The Fibre Channel Switch Module must be running in "standard" mode.39. NPIV must be enabled for this switch40. This connectivity is also supported for the Brocade 7500 switch acting as a SAN router. EX ports can be configured on the Brocade 7500 for fibre channel routing.41. The Brocade 7500/Connectrix MP-7500B switch can also be used as an FC SAN router only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based

scalability limits are provided in the firmware release notes.42. This switch is the same as the IBM SAN256M43. Beginning with the 4.0(1a)N1(1a) firmware release, FC HBA and FC Storage ports may be directly connected to the the Nexus FC ports. The HBA and storage ports that are

supported for direct connect to the Nexus are the same as those for MDS.44. Fibre Channel Ports on the NEX-5020 that will be connected to non-Cisco switches must be configured as NP ports. This will require that the non-Cisco switch support NPIV.45. This switch is also known as the Cisco Nexus 502046. Fibre channel arbitrated loop connections (direct attach) are not supported for EMC Storage Arrays.47. The maximum number of domains supported in Fabric is 24 with total ports available: 1280, maximum F_Ports

devices: 1200, Minimum Fabric OS Version required: v 3.1.2a, v4.2.0b.48. An RPQ is required for any McData switches running in a Brocade FAP environment.

49. OEM equivalents of switches listed in this table are supported by EMC as long as the installed firmware and all other configuration parameters are in accordance with switchesspecified in this table.

50. The maximum number of domains supported in Fabric is 55 with total ports available: 2560, maximum F_ports devices: 2300, Minimum Fabric OS Version required: v5.1.0a.51. For Invista or Recoverpoint with the AP-7600B or PB-48K-AP4-18 application blade, please refer to the specific application version release notes and/or support matrix for the

minimum switch firmware versions supported with that application release.52. Only McData ES-4300 and ES-4500 are supported when the HP Pass-through module(306465-B2) is connected to HP Blade servers BL30p/35p53. The Scimitar or FC4-16AP application blade is also supported in the Brocade DCX or Connectrix ED-DCX-B chassis, for RecoverPoint based configurations only.54. Fibre Channel Ports on the Cisco UCS 6120XP and Cisco UCS 6140XP that will be connected to SAN switches must be configured as NP ports. This will require that the SAN

switch support NPIV.55. Switch firmware is included in the Cisco UCS code bundle56. Firmware 5.5.2.05 cannot be used in the same fabric as FOS switches when running in McDATA Fabric Mode.

Return To Top

November 2010 ESM



ds4400m_supportmatrrix

Documents