dsl-2750u bridge mode setup
TRANSCRIPT
-
DSL-2750U Bridge Setup
-
POWER ADAPTER CONNECTION
POWER UP
your Business
-
POWER UP
your Business
Power Adapter Connection
Plug the 3-Pin Power Supply/ Lightning Protection unit into the wall outlet and then connect the other end of it (12VDC IN)
-
LAN CONNECTION
POWER UP
your Business
-
POWER UP
your Business
LAN Connection
Connect the Ethernet LAN Cable to any (yellow) port on the Router and connect the other end to the LAN port of the PC
-
CONNECTING TO THE UNIT VIA WEB GUI
POWER UP
your Business
-
How to login to Unit using the Web GUI
1. Go to your Internet Explorer or Default Browser.
2. In your URL field, type the Default IP (10.0.0.2) of router.
3. A login page will appear and you will be prompted for a Username and Password these are both admin
Connecting to the unit via Web GUI
-
Username: admin
Password: admin
Connecting to the unit via Web GUI
-
If your username and password details are correct, you will be taken to the Home Screen from where you can navigate your way around.
Connecting to the unit via Web GUI
-
HOW TO SETUP BRIDGING
POWER UP
your Business
Unlike Routing which relies on the DSL 2750U
Router to handle inspection, authentication and
examination, Bridging relies on another device
(mostly a PC) with more advanced inspection,
authentication and examination ability to provide
these features.
-
In the left navigation bar, select Internet Setup
How to setup Bridging
-
Tick the WAN Setup Interface and click Edit.
How to setup Bridging
-
Scroll down to Connection Type and select Bridging as
the Protocol to user
How to setup Bridging
-
After youve selected Bridging, click next
How to setup Bridging
-
Click Apply to save settings.
How to setup Bridging