dsp ucellchk
TRANSCRIPT
-
7/26/2019 Dsp Ucellchk
1/1389
+++ RNC ANNABA 2014-11-20 12:37:25O&M #7372432%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57441;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57441 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes
Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.5 Current background noise = 61 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0
Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 3 Current cell HSUPA user number = 2 Count of cell current 64QAM users = 2 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 753 Current cell downlink equivalent user number[*100] = 767 Downlink Equal User Number of DC Cell Carry Group[*100] = 0
-
7/26/2019 Dsp Ucellchk
2/1389
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes
Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes
Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
-
7/26/2019 Dsp Ucellchk
3/1389
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 6 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:27O&M #7372433%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57442;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57442 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allow
ed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal
RTWP measure result[dBm] = -106.5 Current background noise = 61 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3
Current cell FACH user number = 0 Current cell HSDPA user number = 2 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
-
7/26/2019 Dsp Ucellchk
4/1389
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 452 Current cell downlink equivalent user number[*100] = 515 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested
Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes
Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
-
7/26/2019 Dsp Ucellchk
5/1389
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 23 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:27O&M #7372434
%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57443;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57443 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed
Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.6 Current background noise = 58 Latest TxPwr measure result[%] = 20
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3
-
7/26/2019 Dsp Ucellchk
6/1389
Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 385 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one
Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair
Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
-
7/26/2019 Dsp Ucellchk
7/1389
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 5
Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:27O&M #7372435%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57221;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57221 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -103.5 Current background noise = 63 Latest TxPwr measure result[%] = 22
-
7/26/2019 Dsp Ucellchk
8/1389
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 46 Cell downlink load[%] = 22 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 2 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0
Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 682 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested
Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
-
7/26/2019 Dsp Ucellchk
9/1389
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes
Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 15 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:27O&M #7372436%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57222;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57222
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
-
7/26/2019 Dsp Ucellchk
10/1389
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -105.9 Current background noise = 60 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 3 Cell downlink load[%] = 19 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 0 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0
Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0
Current cell uplink equivalent user number[*100] = 0 Current cell downlink equivalent user number[*100] = 0 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 98 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes
-
7/26/2019 Dsp Ucellchk
11/1389
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No
Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No
ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 9 Cell DSP subrack No. = 6 Cell DSP slot No. = 8(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:28O&M #7372437%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57223;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57223
-
7/26/2019 Dsp Ucellchk
12/1389
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -105.6 Current background noise = 59 Latest TxPwr measure result[%] = 21 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested
DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 15 Cell downlink load[%] = 21 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 2 Current cell FACH user number = 0 Current cell HSDPA user number = 2 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0
Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 189 Current cell downlink equivalent user number[*100] = 511 Downlink Equal User Number of DC Cell Carry Group[*100] = 0
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested
-
7/26/2019 Dsp Ucellchk
13/1389
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No
64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No
Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 9 Cell DSP subrack No. = 6 Cell DSP slot No. = 9(Number of results = 1)
--- END
-
7/26/2019 Dsp Ucellchk
14/1389
+++ RNC ANNABA 2014-11-20 12:37:28O&M #7372438%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57321;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57321 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes
Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.5 Current background noise = 59 Latest TxPwr measure result[%] = 23 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0
Cell downlink load[%] = 22 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 579 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0
-
7/26/2019 Dsp Ucellchk
15/1389
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 3 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes
Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes
Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
-
7/26/2019 Dsp Ucellchk
16/1389
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 5 Cell DSP subrack No. = 6 Cell DSP slot No. = 8(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:28O&M #7372439%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57322;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57322 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allow
ed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal
RTWP measure result[dBm] = -107.2 Current background noise = 71 Latest TxPwr measure result[%] = 22 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 21 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 2
Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
-
7/26/2019 Dsp Ucellchk
17/1389
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 103 Current cell downlink equivalent user number[*100] = 8 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested
Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes
Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
-
7/26/2019 Dsp Ucellchk
18/1389
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 3 Cell DSP subrack No. = 6 Cell DSP slot No. = 9(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:28O&M #7372440
%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=57323;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 57323 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed
Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -107.1 Current background noise = 55 Latest TxPwr measure result[%] = 32
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 34 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 1
-
7/26/2019 Dsp Ucellchk
19/1389
Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 329 Current cell downlink equivalent user number[*100] = 255 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one
Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair
Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
-
7/26/2019 Dsp Ucellchk
20/1389
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 21
Cell DSP subrack No. = 6 Cell DSP slot No. = 9(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:29O&M #7372441%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=10121;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 10121 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.6 Current background noise = 61 Latest TxPwr measure result[%] = 10
-
7/26/2019 Dsp Ucellchk
21/1389
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 10 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 1 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0
Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 28 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested
Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 460 Cell of NodeB max power[dBm] = 460 Whether HSDPA is configured and active = Yes
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
-
7/26/2019 Dsp Ucellchk
22/1389
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes
Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 8 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:29O&M #7372442%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=10122;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 10122
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
-
7/26/2019 Dsp Ucellchk
23/1389
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -108.5 Current background noise = 45 Latest TxPwr measure result[%] = 10 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 10 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 1 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0
Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0
Current cell uplink equivalent user number[*100] = 92 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 0 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 99 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 460 Cell of NodeB max power[dBm] = 460 Whether HSDPA is configured and active = Yes
-
7/26/2019 Dsp Ucellchk
24/1389
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No
Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No
ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 5 Cell DSP subrack No. = 6 Cell DSP slot No. = 10(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:29O&M #7372443%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=10123;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 10123
-
7/26/2019 Dsp Ucellchk
25/1389
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -105.9 Current background noise = 63 Latest TxPwr measure result[%] = 19 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested
DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 17 DC HSDPA carrier group of cell downlink load[%] = 0 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0
Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 211 Current cell downlink equivalent user number[*100] = 264 Downlink Equal User Number of DC Cell Carry Group[*100] = 0
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 100 Cell code congested state = Low-level congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested
-
7/26/2019 Dsp Ucellchk
26/1389
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 460 Cell of NodeB max power[dBm] = 460 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No
64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = No DC-HSDPA function of cell = No
Local Cell ID of DC Assisted Cell = E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 12 Cell DSP subrack No. = 6 Cell DSP slot No. = 9(Number of results = 1)
--- END
-
7/26/2019 Dsp Ucellchk
27/1389
+++ RNC ANNABA 2014-11-20 12:37:29O&M #7372444%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=11074;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 11074 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes
Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -107.6 Current background noise = 52 Latest TxPwr measure result[%] = 20 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0
Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 47 Current cell DCH user number = 2 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 176 Current cell downlink equivalent user number[*100] = 310 Downlink Equal User Number of DC Cell Carry Group[*100] = 2675
-
7/26/2019 Dsp Ucellchk
28/1389
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes
Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes
Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
-
7/26/2019 Dsp Ucellchk
29/1389
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 11 Cell DSP subrack No. = 2 Cell DSP slot No. = 9(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:29O&M #7372445%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=11075;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 11075 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allow
ed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal
RTWP measure result[dBm] = -106.2 Current background noise = 68 Latest TxPwr measure result[%] = 21 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 20 DC HSDPA carrier group of cell downlink load[%] = 37 Current cell DCH user number = 2
Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 1 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
-
7/26/2019 Dsp Ucellchk
30/1389
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 1 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 467 Current cell downlink equivalent user number[*100] = 108 Downlink Equal User Number of DC Cell Carry Group[*100] = 2178 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 90 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested
Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes
Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 2 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
-
7/26/2019 Dsp Ucellchk
31/1389
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 16 Cell DSP subrack No. = 2 Cell DSP slot No. = 9(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:30O&M #7372446
%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=11076;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 11076 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed
Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.2 Current background noise = 61 Latest TxPwr measure result[%] = 24
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 24 DC HSDPA carrier group of cell downlink load[%] = 60 Current cell DCH user number = 11
-
7/26/2019 Dsp Ucellchk
32/1389
Current cell FACH user number = 0 Current cell HSDPA user number = 3 Current cell HSUPA user number = 3 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 1579 Current cell downlink equivalent user number[*100] = 1114 Downlink Equal User Number of DC Cell Carry Group[*100] = 5481 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one
Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 4 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair
Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes
-
7/26/2019 Dsp Ucellchk
33/1389
DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 3 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 0
Cell DSP subrack No. = 2 Cell DSP slot No. = 8(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:30O&M #7372447%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=12014;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 12014 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.0 Current background noise = 59 Latest TxPwr measure result[%] = 36
-
7/26/2019 Dsp Ucellchk
34/1389
Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 5 Cell downlink load[%] = 35 DC HSDPA carrier group of cell downlink load[%] = 64 Current cell DCH user number = 8 Current cell FACH user number = 0 Current cell HSDPA user number = 3 Current cell HSUPA user number = 2 Count of cell current 64QAM users = 2 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0
Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 1266 Current cell downlink equivalent user number[*100] = 1038 Downlink Equal User Number of DC Cell Carry Group[*100] = 4194 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 93 Cell code congested state = Not congested
Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 5 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No
-
7/26/2019 Dsp Ucellchk
35/1389
Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes
Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 17 Cell DSP subrack No. = 2 Cell DSP slot No. = 9(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:30O&M #7372448%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=12015;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 12015
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No
-
7/26/2019 Dsp Ucellchk
36/1389
Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.1 Current background noise = 59 Latest TxPwr measure result[%] = 22 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 3 Cell downlink load[%] = 21 DC HSDPA carrier group of cell downlink load[%] = 57 Current cell DCH user number = 1 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 1 Count of cell current 64QAM users = 0
Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0
Current cell uplink equivalent user number[*100] = 325 Current cell downlink equivalent user number[*100] = 4 Downlink Equal User Number of DC Cell Carry Group[*100] = 2125 Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 0 Cell Iub uplink congested state = Not congested
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes
-
7/26/2019 Dsp Ucellchk
37/1389
Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No
Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 2 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No
ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 15 Cell DSP subrack No. = 2 Cell DSP slot No. = 8(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:30O&M #7372449%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=12016;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 12016
-
7/26/2019 Dsp Ucellchk
38/1389
Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.4 Current background noise = 63 Latest TxPwr measure result[%] = 89 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested
DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0 Cell downlink load[%] = 89 DC HSDPA carrier group of cell downlink load[%] = 91 Current cell DCH user number = 2 Current cell FACH user number = 0 Current cell HSDPA user number = 1 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0
Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0 Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 242 Current cell downlink equivalent user number[*100] = 310 Downlink Equal User Number of DC Cell Carry Group[*100] = 4253
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 89 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 2 Cell Iub uplink congested state = Not congested
-
7/26/2019 Dsp Ucellchk
39/1389
Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No
64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes
Local Cell ID of DC Assisted Cell = 3 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 24 Cell DSP subrack No. = 2 Cell DSP slot No. = 9(Number of results = 1)
--- END
-
7/26/2019 Dsp Ucellchk
40/1389
+++ RNC ANNABA 2014-11-20 12:37:31O&M #7372450%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=12024;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 12024 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred indicator in idle mode = Access allowed Cell barred indicator in connected mode = Access allowed Cell is available or not = Yes cell reported by NodeB is unavailable = No Cell is blocked by NodeB = No Exist available RACH flag = Yes Exist available FACH flag = Yes Exist available PCH flag = Yes Exist available NCP flag = Yes
Exist available CCP flag = Yes RTWP measure state = Normal TxPwr measure state = Normal RTWP measure result[dBm] = -106.1 Current background noise = 62 Latest TxPwr measure result[%] = 23 Cell Uu uplink congested state = Not congested Cell Uu downlink congested state = Not congested DC HSDPA carrier group of cell Uu downlink congested state = Not congested Cell uplink load[%] = 0
Cell downlink load[%] = 22 DC HSDPA carrier group of cell downlink load[%] = 48 Current cell DCH user number = 3 Current cell FACH user number = 0 Current cell HSDPA user number = 0 Current cell HSUPA user number = 0 Count of cell current 64QAM users = 0 Count of cell current MIMO users = 0 Count of cell current EFACH users = 0 Count of cell current DtxDrx users = 0 Count of cell current HsScchLessOperation users = 0 Count of cell current 64QAM+MIMO users = 0 Count of cell current UL16QAM users = 0
Count of cell current Uplink Enhanced L2 users = 0Count of cell main carrier in local cell current DC-HSDPA users = 0 Count of cell current E-DPCCH Boosting users = 0 Count of cell current DC-HSDPA+MIMO users = 0 Count of cell current EPCH users allocated dedicated H-RNTI = 0 Count of cell current ERACH users = 0 Count of cell current EDRX users = 0 Current cell uplink equivalent user number[*100] = 238 Current cell downlink equivalent user number[*100] = 112 Downlink Equal User Number of DC Cell Carry Group[*100] = 1477
-
7/26/2019 Dsp Ucellchk
41/1389
Current user uplink switch algorithm = algorithm two Current user downlink switch algorithm = algorithm one Cell code used rate[%, SF256 used] = 90 Cell code congested state = Not congested Cell credit used rate[%,Max(ulUsed/ulMax, dlUsed/dlMax)] = 1 Cell Iub uplink congested state = Not congested Cell Iub downlink congested state = Not congested Cell Credit uplink congested state = NodeB not congested&LCG not congested&LC not congested Cell Credit downlink congested state = NodeB not congested&LCG not congested&LC not congested Cell fairness state = Fair Cell of MBSC max power[dBm] = 430 Cell of NodeB max power[dBm] = 430 Whether HSDPA is configured and active = Yes Whether HSDPA is supported by NodeB = Yes Whether HSDPA is setup successfully = Yes Whether HSUPA is configured and active = Yes Whether HSUPA is supported by NodeB = Yes
Whether HSUPA is setup successfully = Yes Whether function of EFACH is configured and active = No EFACH function of local cell = Yes Whether EFACH is setup successfully = No Whether function of MIMO is configured and active = No MIMO function of local cell = No Whether MIMO is setup successfully = No 64QAM function of local cell = Yes 64QAM function of cell = Yes 64QAM+MIMO function of local cell = No 64QAM+MIMO function of cell = No Downlink Enhanced L2 function of local cell = Yes Downlink Enhanced L2 function of cell = Yes
Uplink Enhanced L2 function of local cell = No Uplink Enhanced L2 function of cell = No DTXDRX function of local cell = Yes DTXDRX function of cell = No HsScchLessOp function of local cell = Yes HsScchLessOp function of cell = No Uplink 16QAM function of local cell = No Uplink 16QAM function of cell = No DC-HSDPA function of local cell = Yes DC-HSDPA function of cell = Yes Local Cell ID of DC Assisted Cell = 1 E-DPCCH Boosting function of local cell = No E-DPCCH Boosting function of cell = No
DC-HSDPA+MIMO function of local cell = No DC-HSDPA+MIMO function of cell = No Whether function of EPCH is configured and active = No EPCH function of local cell = Yes Whether EPCH is setup successfully = No Whether function of ERACH is configured and active = No ERACH commom EDCH function of cell = No ERACH E-AI function of cell = No ERACH commom EDCH HSDPCCH function of cell = HS-DPCCH non-Capable
-
7/26/2019 Dsp Ucellchk
42/1389
Whether ERACH is setup successfully = No EDrx function of local cell = Yes EDrx function of cell = No Cell DSP No. = 18 Cell DSP subrack No. = 2 Cell DSP slot No. = 8(Number of results = 1)
--- END
+++ RNC ANNABA 2014-11-20 12:37:31O&M #7372451%%DSP UCELLCHK: CHECKSCOPE=CELLID, CellId=12025;%%RETCODE = 0 Execution succeeded.
Cell health information----------------------- Cell ID = 12025 Cell is activated or not = Yes Cell is unblocked or not = Yes Cell is setup or not = Yes Cell barred