dst7602
TRANSCRIPT
-
7/31/2019 dst7602
1/4
DST7602TRASMETTITORI ELETTRONICI DI PRESSIONE DIFFERENZIALEELECTRONIC DIFFERENTIAL PRESSURE TRANSMITTERS Rev 00
- 1 -VALCOM srl - Via Gramsci 1 - 26827 Terranova P. (LO) - ITALYTel +39 0377 911066 Fax +39 0377 919156 www.valcom.it [email protected] Mod DS_rev04
SERIE /SERIES T76D
La serie T76D comprende trasmettitori elettronici per lamisura di pressioni differenziali.
Tutte le versioni sono caratterizzate dalla scelta di campifissi e sono provviste di custodia in acciaio inox AISI304.Lelettronica disponibile nelle seguenti configurazioni:
a) Tipo smart con uscita 4-20mA + protocollo HART,completa di indicatore digitale e pulsanti per laconfigurazione locale
b) Tipo smart con uscita 4-20mA + protocollo HART,senza indicatore digitale e con/senza pulsanti(configurazione remota mediante comunicatoriHART)
T76D series includes transmitters for differential pressuresmeasurement. All versions have fixed ranges and areprovided with AISI304 stainless steel housing.Electronics is available in the following executions:
a) Smart type with 4-20mA + HARTprotocol output,complete with digital display and push buttons forlocal configuration
b) Smart type with 4-20mA + HARTprotocol output,without digital display and with/without push buttons(remote configuration through HARTcommunicators)
CAMPI DI APPLICAZIONE
I trasmettitori della serie T76D trovano impiego nelleapplicazioni industriali per misurare pressioni assoluterelative o differenziali di liquidi, gas e vapori, per misurerelative o differenziali di livelli di liquidi e per misure diportata. Il corpo dello strumento progettato per pressionistatiche fino a 75 bar.Per applicazioni speciali consultare il nostro ufficio tecnico.
CARATTERISTICHE TECNICHE
- Alimentazione: 1235Vcc
- Uscita: 420mA tecnica 2 fili (max 21.5mA) + protocollo di
comunicazione HART
- Isteresi e Ripetibilit < 0.1 % FS- Deriva termica di zero < 0.015 % FS/C (-1060C) (*)- Deriva termica di campo < 0.01 % FS/C (*)- Stabilit a lungo termine < 0.15% FS per anno (*)- Umidit relativa < 98 % RH
- Campo temperatura di processo: -40 85C
- Campo temperatura di stoccaggio: -55 90C- Carico massimo: RLmax = (Vcc 12V) / 21.5mAcon uscita HART: 220Ohm < RL < 600Ohm- Grado di protezione: IP65
- Materiale custodia: AISI304
- Certificazione ATEX
Note (*) : Se non diversamente specificato tutti gli errori sono riferiti al
massimo span. Laccuratezza e le derive sono riferite a strumenti consensore e membrana integrale; possono variare in funzione del tipo
di sensore utilizzato e dellesecuzione.
APPLICATION FIELDS
T76D Series transmitters are used in industrial applicationsto measure absolute relative or differential pressures ofliquids, gas and vapours, to measure relative or differentiallevel of liquids and to measure the flow rate. Instrumentsbody is designed to sustain static pressures up to 75 bar.Our technical office is at your disposal for special applications.
TECHNICAL FEATURES
- Supply: 1235Vdc
- Output: 420mA 2 wire system (max 21.5mA) + HART
communication protocol
- Hysteresis and repeatability < 0.1 % FS- Temperature zero drift < 0.015 % FS/C (-1060C) (*)- Span thermal drift < 0.01 % FS/C (*)- Long term stability < 0.15 % FS per year (*)- Relative Humidity < 98 % RH- Process temperature range: -40 85C
- Storage temperature range: -55 90C- Maximum load: RLmax = (Vdc 12V) / 21.5mAwith HARToutput: 220Ohm < RL < 600Ohm
- Protection rating: IP65
- Housing material: AISI304
- ATEX certification
Note (*) : Unless otherwise stated, performance specifications are
given at maximum span. Accuracy and drifts are given forinstruments with integral sensor and diaphragm; they may vary
according to sensor type and execution.
-
7/31/2019 dst7602
2/4
DST7602TRASMETTITORI ELETTRONICI DI PRESSIONE DIFFERENZIALEELECTRONIC DIFFERENTIAL PRESSURE TRANSMITTERS Rev 00
- 2 -VALCOM srl - Via Gramsci 1 - 26827 Terranova P. (LO) - ITALYTel +39 0377 911066 Fax +39 0377 919156 www.valcom.it [email protected] Mod DS_rev04
ESEMPI DI CODIFICA
Tab.1 Caratteristiche generali
CODICE DESCRIZIONECAMPI DI MISURA (vedi tab. 2)*
MATERIALE CUSTODIA:BP - AISI304 63mm attacco posteriore (IP65)BR - AISI304 63mm attacco radiale (IP65)
ATTACCHI AL PROCESSO (vedi tab. 3)**MATERIALE MEMBRANA:
A - AISI316LMATERIALE PARTI BAGNATE:
1 - AISI316LMATERIALE GUARNIZIONE:
V - FPM (-20200C)CONNESSIONI ELETTRICHE:
C - Connettore DIN 43650 PG9 (IP65)SEGNALE IN USCITA:
1 - 420mA 2 fili + HART
INDICATORE:D1 - Digitale, pulsanti e coperchio ciecoD2 - Digitale, pulsanti e coperchio con obl
N - Senza indicatore e senza pulsantiP - Senza indicatore e con pulsanti
OPZIONI ACCESSORI (vedi tab. 4)
Note(*) La tabella 2 indica i codici, i limiti di campo,lampiezza e la massima pressione unilaterale.Note(**) La tabella 3 elenca i codici dei tipi di attacchistandard.
Tab.2 Campi di misura [bar]
CODICE LIMITI CAMPOLIMITI
AMPIEZZA
MAXPRESSIONE
UNILATERALE01 -0.25 0.25 0.1 0.25 2.5
02 -0.6 0.6 0.15 0.6 6
03 -1 1.6 0.16 1.6 10
04 -1 4 0.4 4 16
05 -1 10 1 10 30
06 -1 25 2.5 25 75
07 -1 60 16 60 75
Tarature disponibili anche con unit di misura diverse.
ORDERING CODE
Tab.1 General characteristics
CODE DESCRIPTIONMEASURING RANGE (see table 2)*
HOUSING MATERIAL:BP - AISI304 63mm back connection (IP65)BR - AISI304 63mm radial connection (IP65)
PROCESS CONNECTIONS (see table 3)**DIAPHRAGM MATERIAL:
A - AISI316LWETTED PARTS MATERIAL:
1 - AISI316LGASKET MATERIAL:
V - FPM (-20200C)ELECTRICAL CONNECTIONS:
C - Connector DIN 43650 PG9 (IP65)OUTPUT SIGNAL:
1 - 420mA 2 wires + HART
INDICATOR:D1 - Digital, push buttons and blind coverD2 - Digital, push buttons and cover with port-hole
N - Without indicator and without push buttonsP - Without indicator and with push buttons
OPTIONS ACCESSORIES (see table 4)
Note(*) Table 2 indicates code, measuring range, span limitsand maximum pressure on either side (unilateral)Note(**) Table 3 lists codes of standard process connections
Tab.2 Measuring range [bar]
CODE RANGE LIMITS SPAN LIMITSMAX
UNILATERALPRESSURE
01 -0.25 0.25 0.1 0.25 2.5
02 -0.6 0.6 0.15 0.6 6
03 -1 1.6 0.16 1.6 10
04 -1 4 0.4 4 16
05 -1 10 1 10 30
06 -1 25 2.5 25 75
07 -1 60 16 60 75
Calibration available with different measuring unit.
T76D
-
7/31/2019 dst7602
3/4
DST7602TRASMETTITORI ELETTRONICI DI PRESSIONE DIFFERENZIALEELECTRONIC DIFFERENTIAL PRESSURE TRANSMITTERS Rev 00
- 3 -VALCOM srl - Via Gramsci 1 - 26827 Terranova P. (LO) - ITALYTel +39 0377 911066 Fax +39 0377 919156 www.valcom.it [email protected] Mod DS_rev04
Tab.3 Attacchi al processo
CODICE DESCRIZIONE
01 2 filetti x 1/4 NPT F
01a 2 prese a saldare per capillare
01b 2 raccordi girevoli 1/2 G F02 2 x 1/4 G F
11 2 x G 1/4 F in linea su corpo quadro 35
11a 2 x 1/4 NPT-F in linea su corpo quadro 35
11b 2 x 1/2 G-F in linea su corpo quadro 35
Tab.4 Opzioni accessori
CODICE DESCRIZIONE
01 - Accuratezza di taratura 0.15 % FS (non per campo01)
025 - Accuratezza di taratura 0.25 % FSATX1 - Versione ATEX Ex II 1G EExia IIC T6, T5
ATX6 - Versione ATEX Ex II 3G Ex nA nL ic IIC T6, T5
CM - Certificato collaudo materiali secondo EN 10204
E - Trascrizione TAG
EI - Targhetta INOX
MAN3 - Manifold a 3 valvole
N - Certificazione navale
RT - Rapporto di taratura su 5 punti
S - Separatore
SS - Doppio separatore
STOM - Staffa per montaggio a parete
Z99 - Speciale
Tab.3 Process connections
CODE DESCRIPTION
01 2 threads x 1/4 NPT F
01a 2 welded connections for capillary
01b 2 turning fittings 1/2 G F02 2 x 1/4 G F
11 2 x G 1/4 F in line on 35 square body
11a 2 x 1/4 NPT-F in line on 35 square body
11b 2 x 1/2 G-F in line on 35 square body
Tab.4 Options accessories
CODICE DESCRIZIONE
01 - Calibration accuracy 0.15 % FS (not for range01)
025 - Calibration accuracy 0.25 % FSATX1 - Version ATEX Ex II 1G EExia IIC T6, T5
ATX6 - Version ATEX Ex II 3G Ex nA nL ic IIC T6, T5
CM - Material inspection certificate according EN 10204
E - TAG transcription
EI - INOX plate
MAN3 - 3 valves manifold
N - Marine type approval
RT - 5 points calibration report
S - Seal
SS - Double seal
STOM - Wall mounting bracket
Z99 - Special
-
7/31/2019 dst7602
4/4
DST7602TRASMETTITORI ELETTRONICI DI PRESSIONE DIFFERENZIALEELECTRONIC DIFFERENTIAL PRESSURE TRANSMITTERS Rev 00
- 4 -VALCOM srl - Via Gramsci 1 - 26827 Terranova P. (LO) - ITALYTel +39 0377 911066 Fax +39 0377 919156 www.valcom.it [email protected] Mod DS_rev04
Con riserva di variazioni tecniche / Technical changes reservedREV DATE DESCRIPTION WRI CHK APP
0 25/10/11 Emissione MP SV EV
SERIE T76D
Trasmettitore elettronico per misura di pressionedifferenziale, taratura 04 bar, custodia in acciaioAISI304 con attacco posteriore, attacco al processo 2filetti x 1/4 NPT F, membrana in acciaio AISI316, partibagnate in acciaio AISI316, guarnizione FPM,connettore DIN 43650 PG9, uscita 420mA, indicatoredigitale con pulsanti e coperchio con obl, staffa permontaggio a parete
Codice = T76D 04 BP 01 A 1 V C 1 D2 STOM
Electronic transmitter for differential pressuremeasurement, calibration 04 bar, AISI304 st. st.housing with back connection, process connection 2
threads x 1/4 NPT F, AISI316 st. st. diaphragm,AISI316 st. st. wetted parts, FPM gasket, DIN 43650PG9 connector, output 420mA, digital indicator withpush buttons and cover with port hole, wall mountingbracket
Code = T76D 04 BP 01 A 1 V C 1 D2 STOM