dt catalog

20
Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com 1(800)264-9571 DT SERIES HYDRAULIC MOTORS

Upload: centralhydraulics

Post on 26-Aug-2014

64 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

DTSERIES HYDRAULIC MOTORS

Page 2: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

2DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT

Max. Speed Max. Flow Max. Torque Max. Pressure rpm lpm [gpm] Nm [lb-in] bar [psi]

300 300 [18.3] 320 380 95 [25] 114 [30] 819 [7250] 955 [8450] 207 [3000] 241 [3500] 259 [3750]

375 374 [22.8] 250 300 95 [25] 114 [30] 1045 [9250] 1127 [9975] 207 [3000] 224 [3250] 241 [3500]

470 464 [28.3] 200 240 95 [25] 114 [30] 1071 [9475] 1390 [12300] 172 [2500] 224 [3250] 241 [3500]

540 536 [32.7] 180 210 95 [25] 114 [30] 1277 [11300] 1525 [13500] 172 [2500] 207 [3000] 241 [3500]

750 747 [45.6] 130 150 95 [25] 114 [30] 1780 [15750] 2090 [18500] 172 [2500] 207 [3000] 241 [3500]

930 929 [56.7] 100 120 95 [25] 114 [30] 1780 [15750] 2141 [18950] 138 [2000] 172 [2500] 207 [3000]

1K1 1047 [63.9] 90 110 95 [25] 114 [30] 1915 [16950] 2316 [20500] 138 [2000] 172 [2500] 207 [3000]

1K5 1495 [91.2] 60 70 95 [25] 114 [30] 2090 [18500] 2316 [20500] 103 [1500] 121 [1750] 138 [2000]

2K1 2093 [127.7] 40 50 95 [25] 114 [30] 2661 [23550] 3342 [29580] 103 [1500] 121 [1750] 138 [2000]

CODE Displacement cc [in3/rev] cont. inter. cont. inter. cont. inter. cont. inter. peak

SpecificationS

overview

key featureS

Intermittent Ratings - 10% of operation Peak Ratings - 1% of operation

the most amazing aspect of the Dt Series motor is its huge torque potential from its relatively small size. the Dt Series motor is capable of producing output torque comparable to competitive designs, but from a package that is both shorter and lighter. the savings in space and weight in no way compromises durability, as the motor uses massive shafts, bearings and drive links to transmit the torque produced by this powerful package. the use of a case drain allows reduced pressure on the shaft seal while maintaining driv-eline lubrication for maximum motor life. Standard mounting and shaft options offer interchangeability with competitive designs. an internal drain option is also available.

Heavy-Duty Roller Bearing supports high side loads and receives forced lubrication for cooling and increased life.

Compact Housing contributes to high power-to-weight ratio of motor and offers front and rear mounting flanges.

Heavy-Duty Drive Link receives forced lubrication for long life and is capable of extreme duty cycles.

Roller Stator® Motor available in displacements up to 2093cc [127.7 cid] for high torque output.

Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiencies.

Page 3: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

3DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTperformance

4

11

24

50

3

9

23

49

75

100

126

151

176

201

2

7

21

46

69

97

122

150

175

200

225

251

276

300

315

5

19

43

65

93

115

140

172

189

222

247

272

298

313

376

3

15

37

58

86

113

135

164

185

211

240

269

296

308

372

12

32

54

78

107

129

156

178

206

233

258

290

300

369

9

28

51

70

96

119

151

172

196

228

249

281

289

7

26

48

69

90

113

140

165

189

216

234

272

280

[476]

[415]

[435]

[430]

54

47

49

49

[1014]

[952]

[1057]

[1064]

[1025]

[929]

[877]

[762]

[679]

[528]

115

108

119

120

116

105

99

88

77

60

[2100]

[2256]

[2278]

[2336]

[2462]

[2222]

[2099]

[2094]

[1864]

[1845]

[1694]

[1489]

[1298]

[1086]

[958]

237

255

257

264

278

251

237

237

211

208

191

168

147

123

108

3363]

[3628]

[3616]

[3719]

[3506]

[3438]

[3342]

[3191]

[3179]

[2961]

[2835]

[2675]

[2409]

[2278]

[1642]

380

410

409

420

396

388

378

361

359

335

320

302

272

257

186

[4304]

[4801]

[4904]

[5019]

[4793]

[4857]

[4666]

[4478]

[4378]

[4402]

[4083]

[3926]

[3666]

[3482]

[2945]

486

543

554

567

542

549

527

506

495

497

461

444

414

393

333

[5942]

[6202]

[6297]

[6122]

[6081]

[5893]

[5802]

[5731]

[5592]

[5401]

[5205]

[4934]

[4857]

[4189]

671

701

712

692

687

666

656

648

632

610

588

558

549

473

[6983]

[7424]

[7554]

[7353]

[7369]

[7281]

[7121]

[6999]

[6871]

[6762]

[6570]

[6264]

[6139]

789

839

854

831

833

823

805

791

776

764

742

708

694

[7959]

[8595]

[8701]

[8621]

[8588]

[8523]

[8420]

[8213]

[8093]

[7934]

[7810]

[7535]

[7421]

899

971

983

974

970

963

951

928

914

897

883

851

839

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 241 [3500]

Pressure - bars [psi] Max. Inter.

82 [729] 165 [1457] 329 [2914] 494 [4371] 659 [5828] 823 [7285] 988 [8742] 1152 [10199]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

300 cc [18.3 in3/rev.]

300

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

7

13

26

51

76

101

127

152

177

202

228

253

278

303

316

379

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

4

9

19

40

60

81

3

8

18

39

60

80

101

121

141

162

2

7

17

37

58

78

99

120

140

161

181

202

222

242

1

5

14

34

54

73

95

116

136

160

178

200

221

240

252

303

4

12

30

49

69

89

109

131

155

175

195

217

237

249

301

10

27

45

63

82

103

125

148

167

189

211

229

241

296

8

25

41

60

79

98

117

143

160

178

201

7

23

41

59

77

97

115

136

156

173

196

[574]

[583]

[596]

[627]

[570]

[467]

65

66

67

71

64

53

[1272]

[1345]

[1365]

[1400]

[1334]

[1337]

[1161]

[995]

[878]

[662]

144

152

154

158

151

151

131

112

99

75

[2670]

[2757]

[2907]

[2982]

[2969]

[2876]

[2768]

[2725]

[2508]

[2319]

[2198]

[1925]

[1676]

[1374]

302

312

329

337

336

325

313

308

283

262

248

218

189

155

[3970]

[4208]

[4388]

[4536]

[4598]

[4532]

[4439]

[4375]

[4149]

[3923]

[3779]

[3568]

[3318]

[3041]

[2839]

[2110]

449

475

496

513

520

512

502

494

469

443

427

403

375

344

321

238

[5535]

[5695]

[6020]

[6141]

[6113]

[6075]

[6059]

[5705]

[5587]

[5416]

[5161]

[4967]

[4732]

[4596]

[3820]

625

644

680

694

691

686

685

645

631

612

583

561

535

519

432

[7122]

[7596]

[7704]

[7724]

[7824]

[7626]

[7467]

[7283]

[7119]

[6886]

[6669]

[6410]

[6283]

[5503]

805

858

871

873

884

862

844

823

804

778

754

724

710

622

[8524]

[8962]

[9275]

[9304]

[9281]

[9321]

[8965]

[8930]

[8895]

[8549]

[8335]

963

1013

1048

1051

1049

1053

1013

1009

1005

966

942

[9288]

[9723]

[9867]

[9964]

[10011]

[10066]

[9877]

[9859]

[9653]

[9474]

[9171]

1050

1099

1115

1126

1131

1137

1116

1114

1091

1071

1036

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 224 [3250]

Pressure - bars [psi] Max. Inter.

103 [908] 205 [1815] 410 [3631] 615 [5446] 821 [7261] 1026 [9076] 1231 [10892] 1333 [11799]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

374 cc [22.8 in3/rev.]

375

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

6

11

21

41

61

82

102

122

142

163

183

203

223

244

254

304

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

Page 4: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

4DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTperformance

3

7

15

32

48

65

81

2

7

15

32

47

64

80

97

114

160

146

2

6

14

60

46

63

79

96

113

129

145

162

178

194

5

13

28

43

60

78

93

110

127

143

160

175

192

203

243

4

11

24

39

54

69

88

104

119

137

155

172

190

198

240

9

23

36

47

63

77

97

114

132

148

165

183

190

235

8

21

34

46

61

74

89

108

120

139

156

19

32

44

58

68

85

102

114

136

154

[762]

[817]

[835]

[815]

[729]

[595]

[459]

86

92

94

92

82

67

52

[1780]

[1728]

[1761]

[1784]

[1799]

[1641]

[1503]

[1354]

[1121]

[888]

[595]

201

195

199

202

203

185

170

153

127

100

67

[3553]

[3597]

[3702]

[3769]

[3744]

[3663]

[3532]

[3366]

[3173]

[2964]

[2689]

[2428]

[2003]

[1554]

401

406

418

426

423

414

399

380

359

335

304

274

226

176

[5395]

[5580]

[5717]

[5725]

[5683]

[5573]

[5422]

[5229]

[4993]

[4734]

[4458]

[4050]

[3670]

[3442]

[2451]

610

631

646

647

642

630

613

591

564

535

504

458

415

389

277

[7137]

[7365]

[7513]

[7565]

[7671]

[7584]

[7454]

[7282]

[7061]

[6772]

[6485]

[6118]

[5917]

[5589]

[4549]

806

832

849

855

867

857

842

823

798

765

733

691

669

632

514

[9226]

[9430]

[9473]

[9538]

[9531]

[9488]

[9350]

[9118]

[8875]

[8536]

[8215]

[7833]

[7676]

[6684]

1042

1066

1070

1078

1077

1072

1057

1030

1003

965

928

885

867

755

[10961]

[11256]

[11287]

[11508]

[11352]

[11523]

[11242]

[11101]

[10877]

[10592]

[10181]

1239

1272

1275

1300

1283

1302

1270

1254

1229

1197

1150

[12217]

[12083]

[12367]

[12323]

[12334]

[12318]

[12118]

[11926]

[11668]

[11200]

1381

1365

1398

1393

1394

1392

1369

1348

1318

1266

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 224 [3250]

Pressure - bars [psi] Max. Inter.

127 [1127] 255 [2253] 509 [4506] 764 [6760] 1018 [9013] 1273 [1126] 1528 [13519] 1655 [14646]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

464 cc [28.3 in3/rev.]

470

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

5

9

17

33

49

66

82

98

115

131

147

164

180

196

205

245

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

2

6

13

27

42

56

70

84

2

5

12

26

41

55

69

83

97

113

127

141

1

4

11

24

39

53

68

82

95

111

125

139

155

169

176

211

3

9

21

36

49

64

76

93

108

123

137

153

166

174

210

1

5

18

30

42

57

72

87

103

116

133

148

164

169

207

4

15

27

38

49

65

80

97

107

123

136

156

163

203

13

24

34

46

57

70

84

100

114

133

[908]

[917]

[954]

[906]

[866]

[744]

[561]

[373]

103

104

108

102

98

84

63

42

[1607]

[2016]

[2043]

[2052]

[2038]

[1883]

[1727]

[1586]

[1295]

[1025]

[798]

[498]

215

228

231

232

230

213

195

179

146

116

90

56

[3722]

[4015]

[4191]

[4448]

[4404]

[4280]

[4122]

[3928]

[3722]

[3460]

[3153]

[2923]

[2464]

[2154]

[1948]

[800]

421

454

474

503

498

484

466

444

421

391

356

330

278

243

220

90

[5897]

[6231]

[6692]

[6774]

[6669]

[6519]

[6349]

[6139]

[5865]

[5563]

[5265]

[4859]

[4494]

[4299]

[3237]

666

704

756

766

754

737

717

694

663

629

595

549

508

486

366

[7730]

[8190]

[8799]

[9049]

[9130]

[8903]

[8710]

[8529]

[8230]

[7969]

[7850]

[7271]

[7024]

[6741]

[5649]

874

925

994

1023

1032

1006

984

964

930

900

887

822

794

762

638

[10201]

[10806]

[11225]

[11262]

[11374]

[11277]

[11091]

[10675]

[10550]

[10250]

[9919]

[9325]

[9075]

[8144]

1153

1221

1268

1273

1285

1274

1253

1206

1192

1158

1121

1054

1025

920

[12930]

[13219]

[13486]

[13556]

[13436]

[13381]

[13086]

[12841]

[12578]

[12283]

1461

1494

1524

1532

1518

1512

1479

1451

1421

1388

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000]

Pressure - bars [psi] Max. Inter.

147 [1302] 294 [2604] 588 [5207] 883 [7811] 1177 [10414] 1471 [13018] 1765 [15621]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

536 cc [32.7 in3/rev.]

540

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

4

8

15

29

43

57

71

85

99

114

128

142

156

170

177

212

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

Page 5: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

5DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTperformance

1

4

9

19

30

40

50

60

70

1

3

9

19

29

39

50

59

69

81

91

101

2

7

17

27

37

47

58

68

79

90

100

110

121

126

151

2

6

15

24

34

44

54

65

76

86

97

108

117

124

149

3

11

20

25

36

49

59

70

80

90

101

111

120

146

16

20

28

36

45

57

69

19

30

37

44

[1276]

[1367]

[1435]

[1400]

[1273]

[1116]

[922]

[682]

[410]

144

154

162

158

144

126

104

77

46

[2566]

[2863]

[3015]

[3080]

[2927]

[2900]

[2574]

[2382]

[2116]

[1780]

[1421]

[1058]

290

323

341

348

331

328

291

269

239

201

161

120

[5917]

[6302]

[6399]

[6317]

[6167]

[5976]

[5792]

[5545]

[5164]

[4819]

[4395]

[3926]

[3447]

[3255]

[1813]

669

712

723

714

697

675

655

627

584

545

497

444

389

368

205

[8242]

[9038]

[9578]

[9583]

[9486]

[9334]

[9136]

[8880]

[8592]

[8209]

[7635]

[7351]

[6947]

[6697]

[5428]

931

1021

1082

1083

1072

1055

1032

1003

971

928

863

831

785

757

613

[11550]

[12410]

[12678]

[12843]

[12785]

[12668]

[12451]

[11907]

[11556]

[11154]

[10737]

[10581]

[10126]

[8665]

1305

1402

1433

1451

1445

1431

1407

1345

1306

1260

1213

1196

1144

979

[15430]

[15658]

[15805]

[15801]

[15634]

[15422]

[15120]

1744

1769

1786

1786

1767

1743

1709

[18373]

[18528]

[18578]

[18271]

2076

2094

2099

2065

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000]

Pressure - bars [psi] Max. Inter.

205 [1815] 410 [3631] 821 [7261] 1231 [10892] 1641 [14522] 2051 [18153] 2462 [21783]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

747 cc [45.6 in3/rev.]

750

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

3

6

11

21

31

41

51

61

71

82

92

102

112

122

127

152

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

1

4

8

16

24

32

40

48

57

1

3

7

16

24

31

40

47

56

64

72

81

89

1

3

7

15

24

30

39

46

55

63

72

80

88

97

101

122

1

3

7

15

24

30

38

45

54

62

70

79

87

96

100

121

3

7

15

23

29

38

44

52

61

69

78

86

94

100

120

3

6

14

22

28

36

42

50

59

67

76

83

93

97

118

5

13

20

27

34

41

49

57

65

75

83

92

96

118

11

18

24

31

36

45

54

64

72

80

89

93

116

16

22

28

33

43

50

58

67

77

86

89

17

24

32

36

46

55

63

71

82

84

[1590]

[1734]

[1816]

[1753]

[1633]

[1438]

[1109]

[807]

[310]

180

196

205

198

185

162

125

91

35

[3423]

[3696]

[3907]

[3825]

[3719]

[3576]

[3253]

[3018]

[2565]

[2118]

[1811]

[1325]

[875]

387

418

442

432

420

404

368

341

290

239

205

150

99

[5368]

[5780]

[6015]

[5878]

[5765]

[5624]

[5536]

[5111]

[4715]

[4281]

[3891]

[3616]

[2977]

[2497]

[2137]

[582]

607

653

680

664

651

636

626

578

533

484

440

409

336

282

241

66

[7089]

[7649]

[7764]

[8021]

[8034]

[7900]

[7476]

[7213]

[6772]

[6429]

[6202]

[5590]

[5139]

[4438]

[4389]

[2652]

801

864

877

906

908

893

845

815

765

726

701

632

581

501

496

300

[9447]

[9886]

[9924]

[9935]

[9800]

[9620]

[9487]

[9059]

[8488]

[8143]

[7091]

[7403]

[6778]

[6390]

[4711]

1067

1117

1121

1123

1107

1087

1072

1024

959

920

801

837

766

722

532

[11451]

[11501]

[11840]

[11991]

[11854]

[11625]

[11630]

[10974]

[10708]

[10418]

[9733]

[9342]

[9038]

[8621]

[6914]

1294

1300

1338

1355

1340

1314

1314

1240

1210

1177

1100

1056

1021

974

781

[13365]

[13769]

[13651]

[13988]

[13251]

[13492]

[13155]

[12830]

[12580]

[12135]

[11553]

[11201]

[10743]

[9235]

1510

1556

1543

1581

1497

1525

1487

1450

1422

1505

1305

1266

1214

1044

[15306]

[15873]

[15716]

[15364]

[15159]

[15287]

[15008]

[14538]

[14148]

[13816]

[13179]

[12863]

[11248]

1730

1794

1776

1736

1713

1727

1696

1643

1599

1561

1489

1454

1271

[17532]

[17570]

[17306]

[17222]

[17216]

[17039]

[16741]

[16454]

[15918]

[15505]

[15286]

1981

1985

1956

1946

1945

1925

1893

1859

1799

1752

1727

[18632]

[19054]

[18873]

[19188]

[18934]

[18625]

[18230]

[17925]

[17427]

[17309]

2105

2153

2133

2168

2140

2105

2060

2025

1969

1956

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000]52 [750] 104 [1500] 138 [2000] 173 [2500]155 [2250]

Pressure - bars [psi] Max. Inter.

255 [2257] 510 [4514] 765 [6771] 1020 [9029] 1275 [11286] 1530 [13543] 1785 [15800] 2040 [18057] 2296 [20314] 2551 [22572]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

929 cc [56.7 in3/rev.]

930

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

3

5

9

17

25

33

41

49

58

66

74

82

90

98

102

123

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

86 [1250] 121 [1750]

Page 6: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

6DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTperformance

1

3

6

14

21

28

36

43

50

1

2

6

13

21

28

36

43

50

57

65

72

79

0.9

2

6

13

20

28

35

42

49

56

65

71

79

86

90

0.6

2

5

13

19

27

34

41

49

56

64

71

78

85

90

108

2

5

11

18

26

32

40

47

55

62

70

77

84

89

107

4

10

16

23

29

37

44

52

60

69

76

83

88

106

9

14

20

26

31

40

50

59

64

74

81

85

105

12

16

26

25

33

38

52

58

67

76

82

104

9

17

22

29

30

41

57

62

71

76

19

25

29

33

45

51

61

71

[1918]

[1821]

[1985]

[1980]

[1500]

[1451]

[1143]

[871]

[390]

217

206

224

224

170

164

129

98

44

[4026]

[4410]

[4407]

[4180]

[4314]

[3814]

[3546]

[3176]

[2761]

[2220]

[1678]

[1033]

[444]

455

498

498

472

487

431

401

359

312

251

190

117

50

[5940]

[6251]

[6672]

[6669]

[6538]

[6270]

[5975]

[5526]

[5129]

[4569]

[4053]

[3453]

[2741]

[1862]

[1635]

671

706

754

754

739

709

675

624

580

516

458

390

310

210

185

[7879]

[8273]

[8700]

[8946]

[9023]

[8580]

[8356]

[7915]

[7535]

[6871]

[6252]

[5774]

[5034]

[4346]

[4096]

[1789]

890

935

983

1011

1020

970

944

894

851

776

706

652

569

491

463

202

[10518]

[10810]

[11169]

[10956]

[10986]

[10688]

[10163]

[9933]

[9402]

[8869]

[8227]

[7493]

[6677]

[6281]

[4217]

1189

1222

1262

1238

1241

1208

1148

1122

1062

1002

930

847

755

710

477

[12635]

[13147]

[13286]

[13106]

[12879]

[12569]

[12237]

[11678]

[11252]

[10502]

[9846]

[9007]

[8519]

[6460]

1428

1486

1501

1481

1455

1420

1383

1320

1272

1187

1113

1018

963

730

[15014]

[14998]

[15280]

[15168]

[14981]

[14263]

[14045]

[13738]

[12874]

[12214]

[11398]

[10901]

[8962]

1697

1695

1727

1714

1693

1612

1587

1552

1596

1380

1288

1232

1013

[16936]

[17185]

[16982]

[16756]

[16424]

[16261]

[15877]

[15246]

[14599]

[13777]

[13247]

[10947]

1914

1942

1919

1893

1856

1837

1794

1723

1650

1557

1497

1237

[18971]

[18983]

[18879]

[18569]

[18426]

[18147]

[17705]

[17055]

[16164]

[15844]

2144

2145

2133

2098

2082

2051

2001

1927

1827

1790

[20456]

[20596]

[20275]

[20130]

[19716]

[18924]

[18591]

[17950]

2311

2327

2291

2275

2228

2138

2101

2028

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 69 [1000]52 [750] 104 [1500] 138 [2000] 173 [2500]155 [2250]

Pressure - bars [psi] Max. Inter.

287 [2544] 575 [5088] 862 [7631] 1150 [10175] 1437 [12719] 1725 [15263] 2012 [17807] 2300 [20350] 2587 [22894] 2874 [25438]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

1047 cc [63.9 in3/rev.]

1k1

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

2

4

8

15

22

29

37

44

51

58

66

73

80

87

91

109

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

86 [1250] 121 [1750]

0.9

2

4

9

15

20

25

30

36

0.6

1

4

9

14

19

24

29

35

40

45

50

55

1

3

8

13

18

23

28

33

39

44

49

54

60

63

3

7

12

17

22

27

32

37

43

48

53

60

62

75

7

10

15

19

24

30

36

40

47

52

58

62

74

9

14

19

24

32

38

44

48

58

59

73

14

15

21

27

37

46

50

53

[2703]

[2978]

[3106]

[2925]

[2629]

[2183]

[1740]

[1157]

[594]

305

336

351

331

297

247

197

131

67

[5736]

[6128]

[6454]

[6304]

[3023]

[5662]

[5159]

[4695]

[4282]

[3457]

[2602]

[1607]

[770]

648

693

729

712

681

640

583

531

484

391

294

182

87

[8942]

[9597]

[9879]

[9632]

[9188]

[8860]

[8315]

[7689]

[6805]

[6072]

[5435]

[4310]

[4032]

[2589]

1011

1085

1116

1088

1038

1001

940

869

769

686

614

487

456

293

[12072]

[13191]

[12952]

[12655]

[12189]

[11770]

[11217]

[10374]

[9523]

[8746]

[7720]

[6632]

[6232]

[2174]

1364

1491

1464

1430

1377

1330

1267

1172

1076

988

872

749

704

246

[15668]

[15662]

[15864]

[15479]

[15066]

[14532]

[13866]

[13177]

[12320]

[11356]

[10143]

[9313]

[5711]

1771

1770

1793

1749

1702

1642

1567

1489

1392

1283

1146

1052

645

[18786]

[18498]

[18059]

[17612]

[16941]

[16334]

[15429]

[14442]

[13570]

[12961]

[9265]

2123

2090

2041

1990

1914

1846

1743

1632

1533

1465

1047

[20613]

[20353]

[19986]

[19366]

[18553]

[17883]

[16568]

[16306]

2329

2300

2258

2188

2301

2021

1872

1843

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 52 [750] 69 [1000] 86 [1250] 104 [1500] 121 [1750]

Pressure - bars [psi] Max. Inter.

410 [3631] 821 [7261] 1231 [10892] 1641 [14522] 2051 [18153] 2462 [21783] 2872 [25414]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

1495 cc [91.2 in3/rev.]

1k5

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

2

3

6

11

16

21

26

31

36

41

46

51

56

61

64

76

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

Page 7: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

7DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTperformance

0.8

1

3

7

10

14

17

21

25

0.8

1

3

7

10

14

17

21

24

28

32

36

39

1

3

6

10

14

16

21

24

28

32

36

39

43

45

6

9

13

16

20

23

27

31

36

39

43

45

54

9

13

17

21

26

30

35

38

42

45

54

8

9

12

13

20

26

30

36

40

43

53

[3878]

[3891]

[4073]

[3920]

[3560]

[2985]

[2431]

[1535]

[587]

438

440

460

443

402

337

275

173

66

[7894]

[8162]

[8458]

[8525]

[8179]

[7824]

[7205]

[6398]

[5479]

[4391]

[3257]

[1991]

[628]

892

922

956

963

924

884

814

723

619

496

368

225

71

[12375]

[12923]

[13192]

[13012]

[12613]

[11944]

[11171]

[10221]

[9009]

[8052]

[6686]

[5507]

[3794]

[3129]

1398

1460

1491

1470

1425

1350

1262

1155

1018

910

755

622

429

354

[17520]

[17370]

[16995]

[16538]

[15886]

[15063]

[14046]

[12973]

[11537]

[10367]

[8704]

[7883]

[3803]

1980

1963

1920

1869

1795

1702

1587

1466

1304

1171

984

891

430

[21152]

[20733]

[20232]

[19519]

[18645]

[17527]

[16449]

[14885]

[13665]

[12636]

[8485]

2390

2343

2286

2206

2107

1980

1859

1682

1544

1428

959

[23613]

[23564]

[23588]

[23333]

[22777]

[21866]

[20878]

[19575]

[18291]

[17445]

[13207]

2668

2663

2665

2637

2574

2471

2359

2212

2067

1971

1492

Torque - Nm [lb-in], Speed rpm

Flo

w -

lpm

[gpm

]

17 [250] 35 [500] 52 [750] 69 [1000] 86 [1250] 104 [1500] 121 [1750]

Pressure - bars [psi] Max. Inter.

574 [5084] 1149 [10167] 1723 [15251] 2298 [20334] 2872 [25418] 3447 [30502] 4021 [35585]

Theoretical Torque - Nm [lb-in]

Max

.In

ter.

Max

.C

ont.

2093 cc [127.7 in3/rev.]

2k1

2 [0.5]

4 [1]

8 [2]

15 [4]

23 [6]

30 [8]

38 [10]

45 [12]

53 [14]

61 [16]

68 [18]

76 [20]

83 [22]

91 [24]

95 [25]

114 [30]

1

2

4

8

11

15

19

22

26

29

33

37

40

44

46

55

Theoretical rpm

Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Intermittent Ratings - 10% of Operation

Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]

Max. Cont.

Page 8: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

8DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DTBearing Curve: the bearing curve represents allowable bearing loads based on iSo 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table located below.

NOTE:Dt motor weights vary ± 1,4 kg [3 lb] depending upon motor configuration. Subtract 3 [.11] from dimension AG for motors using the 1,2 or 5 endcover.

LENGTH / WEIGHT CHARTStandard Mount - Dimension AG

Code mm [in] kg [lb] 300 209 [8.25] 20,2 [44.6] 375 216 [8.50] 20,8 [45.8] 470 223 [8.80] 21,4 [47.1] 540 230 [9.04] 21,9 [48.2] 750 248 [9.75] 23,3 [51.3] 930 263 [10.35] 24,4 [53.8] 1K1 273 [10.75] 25,3 [55.7] 1K5 311 [12.25] 28,3 [62.5] 2K1 362 [14.25] 32,3 [71.3]

700 SerieS houSinGS

C2C8E2E8

NOTE: *Dimension for the c2 & c8 is 127,0 [5.00] - 127,7 [4.99]. *Dimension for the e2 & e8 is 124,9 [4.92] - 124,5 [4.90].

149 [5.85] max.

Ø 161,9 [6.375]

149 [5.85] max.

137 [5.38]

127,0 [4.999]126,8 [4.994]

13,3 [.524]13,1 [.514]

101 [3.97]

6,9 [.270]6,5 [.255]

22 [.88] min.

16,8 [.663]16,5 [.649]

2,7 [.105]2,4 [.095]

137 [5.38]

Ø 152,4 [6.00]

AG

*[see reference below]

22 [.88] min.

12,000

11,000

10,000

9,000

8,000

7,000

6,000

5,000

4,000

3,000

2,000

1,000lb

5,000

4,500

4,000

3,500

3,000

2,500

2,000

1,500

1,000

500 dan-4 -3 -2 -1 0 1 2 3 4 5 6 in.

-100 -75 -50 -25 0 25 50 75 100 125 150 mm

Bearing

Shaft

890 dan [2000 lbs]

445 dan [1000 lbs]

Standard mount 5” pilot end ports

Standard mount 5” pilot Side ports

Standard mount 125mm pilot end ports

Standard mount 125mm pilot Side ports

BEARING LOAD MULTIPLICATION FACTOR TABLE

RPM FACTOR RPM FACTOR 50 1.23 500 0.62 100 1.00 600 0.58 200 0.81 700 0.56 300 0.72 800 0.50 400 0.66

NOTE: Dimensions shown are without paint. paint thickness can be up to 0,13 [.005]

Page 9: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

9DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT700 SerieS ShaftS

8 [.31]

58 [2.29]*77 [3.02]

38,9 [1.530]37,6 [1.480]

19 [.75] min.

38,1 [1.500]38,1 [1.499]

3/8”-16 unc

42,4 [1.671]42,1 [1.658]

10,0 [.376]10,0 [.375] 11,2 [.439]

11,1 [.438]

1/2” Lock washer

62,7 [2.470]62,4 [2.456]

12,7 [.501]12,7 [.500] 18 [.72]

24 [.94] min.

57,2 [2.250]57,1 [2.249]

1/2”-20 unf

*113 [4.46]

98 [3.84]57,7 [2.270]56,4 [2.220]

12,0 [.471]11,9 [.470]

8,0 [.315]8,0 [.313]

43,0 [1.693]42,6 [1.677]

40,0 [1.576]40,0 [1.575]

m12 x 1.25

80 [3.13]

11 [.42]

57,7 [2.27]56,4 [2.22]

24 [.94] min.

m12 x 1.25

14,0 [.552]14,0 [.551]

9,0 [.353]8,9 [.352]

53,2 [2.093]52,8 [2.080]

25 [.98]

12 [.47]

50,0 [1.969]50,0 [1.968]

30°

56,6 [2.230]55,4 [2.180]

*122 [4.80]

79 [3.11]mounting flange

mounting flange

mounting flange

mounting flange

10,0 [.376]10,0 [.375]

11,2 [.439]11,1 [.438]

1/2” Lock washer

62,7 [2.470]62,4 [2.456]

12,7 [.501]12,7 [.500]

24 [.94] min.

57,2 [2.250]57,1 [2.249]

1/2”-20 unf

*113 [4.46]

98 [3.84]

57,7 [2.270]56,4 [2.220]

mounting flange

113 [4.45]

30 1-1/2” Straight

Max. Torque: 2230 Nm [19800 lb-in]

40 2-1/4” Straight

Max. Torque: 2700 Nm [24000 lb-in]

NOTE: *Shaft lengths vary ± 0,8 [.030]. †for speed sensor motors only.

41 50mm Straight

Max. Torque: 2700 Nm [24000 lb-in]

†47 2-1/4” Straight with Modified Keyway

Max. Torque: 2700 Nm [24000 lb-in]

36 40mm Straight

Max. Torque: 2700 Nm [24000 lb-in]

†54 40mm Straight extended

Page 10: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

10DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT700 SerieS ShaftS

4 [.17]

5 [.20]

19 [.75] 45 [1.78]

78 [3.09]

*113 [4.45]

31,8 [1.250]30,5 [1.200]

1:8 taper

1-1/8”-18 unef

38,1 [1.500]38,0 [1.498]

8,0 [.314]8,0 [.313] 7,0 [.276]

7,0 [.274]

4 [.15]

75 [2.97]

*91 [3.57]

53,5 [2.106]53,4 [2.104]

24 [.94]

56 [2.20]

1/2”-20 unf

19 [.75] min.

19 [.74] min.

31,7 [1.249]31,6 [1.245]

3/8”-16 unc

46 [1.81]

41 [1.60]

16,0 [.631]15,9 [.629] 10,0 [.395]

9,9 [.391]

*120 [4.73]

70 [2.75]35 [1.37]

7 [.29]

8 [.32]

60,0 [2.35]

m42 x 31:10 taper

38,9 [1.530]37,6 [1.480]

3/8”-16 unc

38,1 [1.500]38,0 [1.496]

*68 [2.69]

**58 [2.30]

mounting flange

mounting flange

mounting flange

14 tooth 12/24 pitchStd. anSi B92.1-1996 Spline

mounting flange

17 tooth 12/24 pitchSae Std. Spline

mounting flange

16 tooth 8/16 pitchStd. anSi B92.1-1996 Spline -

Deviates from Standard

**34 [1.35]

56 [2.19]

31 1-1/2” tapered

Max. Torque: 2250 Nm [19900 lb-in]

NOTE: a slotted nut is standard on all tapered shafts. *Shaft lengths vary ± 0,8 [.030]. †for speed sensor motors only.

23 14 tooth Spline

Max. Torque: 2070 Nm [18400 lb-in]

†09 14 tooth Spline extended

42 16 tooth Spline

Max. Torque: 2700 Nm [24000 lb-in]

†48 16 tooth Spline extended

33 17 tooth Spline

Max. Torque: 2250 Nm [19900 lb-in]

†49 17 tooth Spline extended

45 60mm tapered

Max. Torque: 2700 Nm [24000 lb-in]

NOTE: **for the 49 shaft add 9,7mm [.38 in] to dimension.

Page 11: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

11DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT700 SerieS portinG optionS

Auxillary View Q - Case Drain

Auxillary View V - Valve Cavity

30 [1.20]

Q

V

12°

25°

Q

23 [.91]

36 [1.43]

Q

Q

116 [4.55]

130 [5.10]

130 [5.10]

23 [.90]

13°

13°

69 [2.73]

69 [2.73]

C

E

C

C

E

D

126 [4.97]

Q

28 [1.10]

25°

38°

25°

25°

V

Q

12°

25°

25°

25°

25°

D

38.5° 38.5°C

E

38.5°

23 [.90]

A

B

A

B

A

B

A

B

A

B

116 [4.55]

A

B

A

B

Q

E

38.5°

A

B

V V

Q

NOTE: A- pressure port B- pressure port C- case Drain D- 10 Series/2-way valve cavity (7/8”-14 unf-2B) E- internal Drain

SiDe portS

5 1-1/16” o-ring with 7/16” Drain2 3/4” BSp.f with 1/4” Drain

7 3/4” BSp.f with 1/4” Drain6 1-1/16” o-ring with 7/16” Drain

NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.

NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.

NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.

NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.

Page 12: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

12DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT700 SerieS portinG optionS

Q - Case Drain

V - Valve Cavity

23 [.90]

28 [1.10]

V

10 [.39]

37 [1.46]

11 [.44]

C

E

D

126 [4.97]

Q

3 [.13]

38.5°7 [.26]

23 [.90]

V

Q

12°D

38.5°

C

E

10 [.39]

37 [1.46]

11 [.44]

23 [.90]

10 [.39]

37 [1.46]

11 [.44]

3 [.13]

7 [.26]23 [.90]

12°

10 [.39]

37 [1.46]

11 [.44]

23 [.90]

A

B

A

B

A

B

A

B

E

A

B

Q38.5°

23 [.90]

23 [.90]

30 [1.20]

64 [2.50]

28,6 [1.125]

5/16 - 18 UNC12,7 [.500] Min. Deep

SiDe portS

1 7/8” o-ring with 7/16” Drain

3 manifold with 7/16” Drain

NOTE: A- pressure port B- pressure port C- case Drain D- 10 Series/2-way valve cavity (7/8”-14 unf-2B) E- internal Drain

NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.

NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.

NOTE: the 3 endcover is only available with the internal drain option..

enD portS

Page 13: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

13DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT700 SerieS moDeL coDe BuiLDer

SERIES DISPLACEMENT HOUSING SHAFT PAINT CAVITY ADD ON MISCELLANEOUS

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8

STEP 1 - Select a series

STEP 2 - Select a displacement option

DT Series Motor700

C2C8E2E8

STEP 3 - Select a mounting option

Standard Mount 5” Pilot End Ports (S)Standard Mount 5” Pilot Side Ports (S)Standard Mount 125mm Pilot End Ports (S)Standard Mount 125mm Pilot Side Ports (S)

STEP 6 - Select a valve cavity option

STEP 5 - Select a paint option

BlackBlack (unpainted flange face)No Paint

ABZ

STEP 8 - Select a miscellaneous option

NoneInternal DrainFreeturning RotorInternal Drain with Freeturning Rotor

AAABACAD

300 cc [18.3 in3/rev]374 cc [22.8 in3/rev]464 cc [28.3 in3/rev]536 cc [32.7 in3/rev]747 cc [45.6 in3/rev]

300375470540750

929 cc [56.7 in3/rev]1047 cc [63.9 in3/rev]1495 cc [91.2 in3/rev]2093 cc [127.7 in3/rev]

9301K11K52K1

STEP 4 - Select a shaft option

1-1/2” Straight1-1/2” Tapered2-1/4” Straight40mm Straight14 Tooth Spline16 Tooth Spline17 Tooth Spline

30314036234233

NoneRelief Valve Cavity69 Bar [1000 psi] Relief Valve Installed86 Bar [1250 psi] Relief Valve Installed104 Bar [1500 psi] Relief Valve Installed121 Bar [1750 psi] Relief Valve Installed138 Bar [2000 psi] Relief Valve Installed173 Bar [2500 psi] Relief Valve Installed207 Bar [3000 psi] Relief Valve Installed

ABCDEFGJL

STEP 7 - Select an add on option

StandardLock NutSolid Hex Nut4-Pin Dual Male Weatherpack Connector (S)4-Pin M12 Dual Male Connector (S)3-Pin Single Male Weatherpack Connector (S)4-Pin M12 Single Male Connector (S)

ABCWXYZ

NOTE: Valve cavity option is not available on porting option 3.

NOTE: (S) - STEP 3 Mountings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options.

NOTE: To complete the three (3) digit DT Series housing code a two (2) digit mounting option must be followed with the single (1) digit porting option found in STEP 3 part II. Side port mounting options need side port porting options and end port mounting options need end port porting options.

STEP 3 (part II) - Select a porting option

7/8” O-Ring With 7/16” Drain1

END PORTS

SIDE PORTS

23567

3/4” BSP.F With 1/4” Drain (Radial Ports)Manifold With 7/16” Drian (Parallel Ports)1-1/16” O-Ring With 7/16” Drain (Radial Ports)1-1/16” O-Ring With 7/16” Drain (Parallel Ports)3/4” BSP.F With 1/4” Drain (Parallel Ports)

50mm Straight60mm Tapered2-1/4” Straight Modified (S)40mm Straight Extended (S)14 Tooth Spline Extended (S)16 Tooth Spline Extended (S)17 Tooth Spline Extended (S)

41454754094849

A B A B NOTE: DT Series motors do not have internal components that allow the motor to turn in either direction. Refer to the diagram to the left to determine which way the motor will turn when either port A or port B is pressurized.

Page 14: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

14DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT740 SerieS houSinGS

4-hole end portsW2 4-hole Side portsW8

126,9 [4.998]126,9 [4.996]

13 [.52]

25 [1.00]

138 [5.45]

9,8 [.385]9,5 [.375]

36 [1.40]

67 [2.63]

117,3 [4.615]117,2 [4.260]

Ø 152,4 [6.00]

Ø 184 [7.25]

200 [7.87] max.

14,0 [.553]13,8 [.545]

Ø 152,4 [6.00]

(6) 1/2”-20 Studs with Lugnuts

45°

154 [6.06]

ah

30,000

27,000

24,000

21,000

18,000

15,000

12,000

9,000

6,000

3,000lb

13,00012,00011,00010,0009,0008,0007,0006,0005,0004,0003,0002,0001,000dan

-1 0 1 2 3 4 5 6 7 8 9 10 in.

-25 0 25 50 75 100 125 150 175 200 225 250 mm

Bearing

Shaft

890 dan [2000 lbs]

890 dan [2000 lbs]

Bearing Curve: the bearing curve represents allowable bearing loads based on iSo 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table located on page 8.

NOTE:Dt motor weights vary ± 1,4 kg [3 lb] depending upon motor configuration. Subtract 3 [.11] from dimension Ah for motors using the 1,2 or 5 endcover.

LENGTH / WEIGHT CHARTWheel Mount - Dimension AH

Code mm [in] kg [lb] 300 120 [4.74] 28,4 [62.6] 375 127 [4.99] 28,9 [63.8] 470 134 [5.29] 29,5 [65.1] 540 140 [5.53] 30,0 [66.2] 750 158 [6.24] 31,4 [69.2] 930 174 [6.84] 32,6 [71.8] 1K1 184 [7.24] 33,4 [73.7] 1K5 222 [8.74] 36,5 [80.5] 2K1 273 [10.74] 40,5 [89.3]

NOTE: the 740 Series motor is not available with the internal drain option. Drain line pressure must be maintained below 2 bar [25 psi]. a dedicated line from the motor drain port to the reservoir is recommended.

NOTE: Dimensions shown are without paint. paint thickness can be up to 0,13 [.005]

Page 15: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

15DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT740 SerieS moDeL coDe BuiLDer

SERIES DISPLACEMENT HOUSING SHAFT PAINT CAVITY ADD ON MISCELLANEOUS

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8

STEP 1 - Select a series

STEP 2 - Select a displacement option

DT Series Wheel Hub Motor740

W2W8

STEP 3 - Select a mounting option

4-Hole End Ports4-Hole Side Ports

STEP 6 - Select a valve cavity option

STEP 5 - Select a paint option

BlackNo Paint

AZ

STEP 8 - Select a miscellaneous option

NoneFreeturning Rotor

AAAC

300 cc [18.3 in3/rev]374 cc [22.8 in3/rev]464 cc [28.3 in3/rev]536 cc [32.7 in3/rev]747 cc [45.6 in3/rev]

300375470540750

929 cc [56.7 in3/rev]1047 cc [63.9 in3/rev]1495 cc [91.2 in3/rev]2093 cc [127.7 in3/rev]

9301K11K52K1

STEP 4 - Select a shaft option

6-Bolt Wheel Flange61

NoneRelief Valve Cavity1000 psi Relief Valve Installed1250 psi Relief Valve Installed1500 psi Relief Valve Installed1750 psi Relief Valve Installed2000 psi Relief Valve Installed2500 psi Relief Valve Installed3000 psi Relief Valve Installed

ABCDEFGJL

STEP 7 - Select an add on option

StandardA

NOTE: To complete the three (3) digit DT Series housing code a two (2) digit mounting option must be followed with the single (1) digit porting option found in STEP 3 part II. Side port mounting options need side port porting options and end port mounting options need end port porting options.

STEP 3 (part II) - Select a porting option

7/8” O-Ring With 7/16” Drain1

END PORTS

SIDE PORTS

25

3/4” BSP.F With 1/4” Drain (Radial Ports) 1-1/16” O-Ring With 7/16” Drain (Radial Ports)

A B A B NOTE: DT Series motors do not have internal components that allow the motor to turn in either direction. Refer to the diagram to the left to determine which way the motor will turn when either port A or port B is pressurized.

Page 16: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

16DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT710 SerieS (Dt motor/Brake)

13 [.50]

Ø 209,6 [8.250]

85 [3.35] min.

195 [7.67] max.

184 [7.26] max.

26 [1.04] min.

42 [1.65]

(2) Sae J51 4b7/16”-20 release ports11 [.45] min. Deep

135 [5.50] max.

129 [5.07]

127 [5.00]

25 [1.00]

8,1 [.320]7,8 [.309]

16,7 [.658]16,5 [.648]

180,7 [7.115]180,6 [7.110]

ai

88,9 [3.500]88,1 [3.470]

6,4 [.250]5,8 [.230]

195 [7.67] max.

184 [7.26] max.

14,000

13,000

12,000

11,000

10,000

9,000

8,000

7,000

6,000

5,000

4,000

3,000

2,000lb

6,000

5,500

5,000

4,500

4,000

3,500

3,000

2,500

2,000

1,500

1,000dan-1 0 1 2 3 4 5 6 7 8 9 10 in.

-25 0 25 50 75 100 125 150 175 200 250 300 mm

Bearing

Shaft

445 dan [1000 lbs]

445 dan [1000 lbs]

4-hole end portsW2 4-hole Side portsW8

Bearing Curve: the bearing curve represents allowable bear-ing loads based on iSo 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table located on page 8.

rated brake torque ................................1582 nm [14000 lb-in]initial release pressure .................................... 19 bar [275 psi]full release pressure ....................................... 33 bar [475 psi]maximum release pressure ......................... 207 bar [3000 psi]release volume ..................................13-16 cc [0.8 - 1.0 cu in]

NOTE: See page 18 for important motor/brake operating recommendations.

NOTE:Dt motor weights vary ± 1,4 kg [3 lb] depending upon motor configuration. Subtract 3 [.11] from dimension Ai for motors using the 1,2 or 5 endcover.

LENGTH / WEIGHT CHARTWheel Mount - Dimension AI

Code mm [in] kg [lb] 300 115 [4.54] 27,2 [60.0] 375 122 [4.79] 27,8 [61.2] 470 129 [5.09] 28,3 [62.5] 540 135 [5.33] 28,8 [63.6] 750 153 [6.04] 30,3 [66.7] 930 169 [6.64] 31,4 [69.2] 1K1 179 [7.04] 32,2 [71.1] 1K5 217 [8.54] 35,3 [77.9] 2K1 268 [10.54] 39,3 [86.7]

NOTE: the Dt 710 series motor/brakes are available with different holding torque specifi-cations. for additional information please contact white Drive products customer Service & technical Support or your local white Drive products’ distributor.

NOTE: Dimensions shown are without paint. paint thickness can be up to 0,13 [.005]

Page 17: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

17DELIVERING THE POWER TO GET WORK DONE

whitedriveproducts

DT

32,5 [1.280]31,2 [1.230]

12,7 [.501]12,7 [.500]

55 [2.17]

8 [.32]

1:10 Taper

11,2 [.439]11,1 [.438]

50,8 [1.999]50,7 [1.998]

34 [1.33]

7 [.28]

*214 [8.44]

24 [.94]

9 [.35]

1/2”-20 UNF

56,7 [2.232]56,2 [2.213]

57,7 [2.270]56,4 [2.220]

*215 [8.46]

76 [3.00]

58 [2.28]

14 [.55]

23 [.91]

MountingFlange Mounting

Flange46 [1.82]12,7 [.501]

12,7 [.500]11,2 [.439]11,1 [.438]

M42 x 3

710 SerieS ShaftS

50 2” Straight

Max. Torque: 2700 Nm [24000 lb-in]

51 55mm tapered

Max. Torque: 2700 Nm [24000 lb-in]

NOTE: a slotted nut is standard on all tapered shafts. *Shaft lengths vary ± 0,8 [.030].

SERIES DISPLACEMENT HOUSING SHAFT PAINT CAVITY ADD ON MISCELLANEOUS

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8

STEP 1 - Select a series

STEP 2 - Select a displacement option

DT Series Motor/Brake710

W2W8

STEP 3 - Select a mounting option

4-Hole End Ports4-Hole Side Ports

STEP 6 - Select a valve cavity option

STEP 5 - Select a paint option

BlackNo Paint

AZ

STEP 8 - Select a miscellaneous option

NoneFreeturning Rotor

AAAC

300 cc [18.3 in3/rev]374 cc [22.8 in3/rev]464 cc [28.3 in3/rev]536 cc [32.7 in3/rev]747 cc [45.6 in3/rev]

300375470540750

929 cc [56.7 in3/rev]1047 cc [63.9 in3/rev]1495 cc [91.2 in3/rev]2093 cc [127.7 in3/rev]

9301K11K52K1

STEP 4 - Select a shaft option

2” Straight55mm Tapered

5051

NoneRelief Valve Cavity1000 psi Relief Valve Installed1250 psi Relief Valve Installed1500 psi Relief Valve Installed1750 psi Relief Valve Installed2000 psi Relief Valve Installed2500 psi Relief Valve Installed3000 psi Relief Valve Installed

ABCDEFGJL

STEP 7 - Select an add on option

StandardA

NOTE: Valve cavity option is not available on porting option 3.

NOTE: To complete the three (3) digit DT Series housing code a two (2) digit mounting option must be followed with the single (1) digit porting option found in STEP 3 part II. Side port mounting options need side port porting options and end port mounting options need end port porting options.

A B A B NOTE: DT Series motors do not have internal components that allow the motor to turn in either direction. Refer to the diagram to the left to determine which way the motor will turn when either port A or port B is pressurized.

STEP 3 (part II) - Select a porting option

7/8” O-Ring With 7/16” Drain1

END PORTS

SIDE PORTS

23567

3/4” BSP.F With 1/4” Drain (Radial Ports)Manifold With 7/16” Drian (Parallel Ports)1-1/16” O-Ring With 7/16” Drain (Radial Ports)1-1/16” O-Ring With 7/16” Drain (Parallel Ports)3/4” BSP.F With 1/4” Drain (Parallel Ports)

Page 18: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

CAUTION! - white Drive products’ motors/brakes are intended to operate as static or parking brakes. System circuitry must be designed to bring the load to a stop before applying the brake.

CAUTION! - Because it is possible for some large displacement motors to overpower the brake, it is critical that the maximum system pressure be limited for these applications. failure to do so could cause serious injury or death. when choosing a motor/brake for an application, consult the performance chart for the series and displacement chosen for the application to verify that the maximum operating pressure of the system will not allow the motor to produce more torque than the maximum rating of the brake. also, it is vital that the system relief be set low enough to insure that the motor is not able to overpower the brake.

to ensure proper operation of the brake, case drain back pressure must be maintained at 34 bar [500 psi] or less. case drain back pressure above 34 bar [500 psi] can result in erratic operation of the brake. to avoid potential problems with the operation of the brake, a separate case drain line is recommended. use of the internal drain option is not recom-mended due to the possibility of return line pressure spikes. a simple schematic of a system utilizing a motor/brake is shown in figure a below. although maximum brake release pressure may be used for an application, a 34 bar [500 psi] pressure reducing valve is recommended to promote maximum life for the brake release piston seals. however, if a pressure reducing valve is used in a system which has case drain back pressure, the pressure reducing valve should be set to 34 bar [500 psi] over the expected case pressure to ensure full brake release. to achieve proper brake release operation, it is necessary to bleed out any trapped air and fill brake release cavity and hoses before all connections are tightened. to facilitate this operation, all motor/brakes feature two release ports. one or both of these ports may be used to release the brake in the unit. Motor/brakes should be configured so that the release ports are near the top of the unit in the installed position. once all system connections are made, one release port must be opened to atmosphere and the brake release line carefully charged with fluid until all air is removed from the line and motor/brake release cavity. when this has been accomplished the port plug or secondary release line must be reinstalled. in the event of a pump or battery failure, an external pressure source may be connected to the brake release port to release the brake, allowing the machine to be moved.

Typical motor/brake schematic

figure a

white Drive proDuct motor/Brake precaution

NOTE: It is vital that all operating recommendations be followed. Failure to do so could result in injury or death.

operAtinG AnD technicAl inforMAtion

Page 19: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

Important InformationBefore selecting or using a white Drive products’ product, it is important that all information concerning the product warranty, limitation of liability and responsibility of the customer be reviewed. this information is located below. please direct any questions regarding this information to your white Drive products representative.

Disclaimerthis catalog provides product options for further investigation by customers having technical expertise with respect to the use of such products. it is the responsibility of the customer to thoroughly analyze all aspects of the customer’s application and to review the information concerning the product in the current product catalog. Due to the diversity of possible ap-plications, the customer is solely responsible for making the final selection of the product(s) to be used and to assure that all performance, safety and warning requirements of the application are met. the customer is further responsible for all testing to verify acceptable life and performance of white Drive products’ products under actual operating conditions.

white Drive products has made all reasonable efforts to present accurate information in this catalog and shall not be responsible for any incorrect information which may result from unintentional oversight. Due to continuous product improvement, the product specifications as stated in this catalog are subject to change by White Drive products at any time without notice. the customer should consult a sales representative of white Drive products for detailed information and to determine any changes in the information in this catalog.

improper selection or improper use of the products described herein can result in death, personal injury and/or property damage. white Drive products, inc.’s sole responsibility with respect to its products is set forth in the warranty/limitation of liability policy state herein.

Warrantywhite Drive products’ products are sold subject to a limited warranty and a limitation of remedies policy, both of which constitute part of any and all agreements to purchase white Drive products’ products. white Drive products makes no other warranties or promises other than those specifically noted in its written policies, and no White Drive products employee or agent has the power to alter those policies other than in writing.

OTHER FINE PRODUCTS AVAILABLE FROM WHITE DRIVE PRODUCTS

HYDRAULIC CONTROLLED PRESSURE RELEASED BRAkES

A COMPLETE RANgE OF LSHT HYDRAULIC MOTORS

Page 20: Dt Catalog

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors www.CenHyd.com1(800)264-9571

Delivering The Power To get Work Done.

white Drive products, inc.p.o. Box 1127hopkinsville, ky. uSa 42241phone: +1.270.885.1110fax: [email protected]

www.whitedriveproducts.com

united Stateswhite (china) Drive products co., Ltd.1-8 ning Zhen Gong luZhenjiang, 212021, Jiangsu, chinaphone: +86 511 5729988fax: +86 511 [email protected]

china

Dt Series catalog - rev. 3.12.10

White Drive products Gmbhmannsnetterstrasse 34 D-40880 opfenbach, Germanyphone: +49 8385 924988 0fax: +49 8385 924988 [email protected]

Germany