dt200 series
TRANSCRIPT
Ê ý× Ö¼ üÈ «Õ ¾Ò ÇÏ µ Á Ð
Ê ý× Ö¼ üÈ «Õ ¾Ò ÇÏ µ Á Ð
DT200 series Electronic Theodolite
DT
20
0 2
00
6.0
8
DT200 series Electronic Theodolite
Suzhou FOIF Co.,Ltd.TEL:+86 512 65224904FAX:+86 512 65230619Http://www.foif.com.cnE-mail:[email protected]: 4 Kong Fu Si Lane, Suzhou 215006, P.R. China
Local Dealer:
DT200 series Electronic Theodolite can be used in third, fourth-order triangulation control surveying, railway,
highway, bridge, water conservancy and mine etc engineering surveying as well as building, installing of large
equipment. It is also applied to cadastral surveying, topographic surveying and other engineering surveying.
Power indicator Tilt on status
H-angle
Producting date
40mm
79mm
x30
Ni-MH rechargeable battery / Alkaline battery
45 hours (rechargeable battery) /80 hours (Alkaline battery)
/
Method
Accuracy
Diameter of circle
Minimum reading
5"
Others
Serial interface
Dimension
Weight
Displays
Display panel
Illumination
Telescope
Objective lens
Magnification
Image
Field of view
Minimum focus
Stadia constant
Stadia ratio
4.5kg
RS-232C Baud rate: 9600bps
4.3kg
Angle measurement
Incremental
Erect
Both
1 20'
2m
0
100
2*
153x175x328mm
-20 ~+50
DT202C
DT202CL
DT202
DT202L
DT205C
DT205CL
DT205
DT205LDT205DDT205DL
DT205DMDT205DML
Compensator
Tilt sensors
Range
Level sensitivity
Plate level
Circular level
Power
Battery
Operating time
2"
1"/5"/10"/20" or 0.2mgon/1mgon/2mgon/5mgon
Yes
¡À3'
Yes No
/
Yes
Yes
No
/
30"/mm
8'/mm
Operating temperature
Specifications
Continuous operating time of
4 AA Alkaline batteries is about
80 hours.
Absolute horizontal angl e
measuremen t, when this funtion
is active, if the power off, turn
on the instrument again and aim
the same target, the horizontal
angle displays the same reading.
Large LCD display
Wide temperature range for
LCD display: -20 to +50
Features
Displays
Series numberFOIF logo
V-angleThe second function active
Accessories
FJ19Diagonal EyepieceFDJ6 ChargerA18a-500 AA alkaline battery
A18a-400 Rechargeable battery
YGM165CYGMJ170
YGM170
*1
*1 "C"means compensator,"L" means laser plummet, "D" means double display, "M" means shift tribrach *2 Standard deviation based on DIN18723