CleanThoroughly strip and clean your metal parts before coating. This can be easily achieved with Eastwood’s Paint Stripper and PRE cleaner-degreaser.

CoatUsing the an Eastwood Hot Coat Gun, simply apply powder to the entire part – you can’t over-coat.

CureCue your part in an electric oven for about 20 minutes and put the part into service when it has cooled. NEVER use an oven used for food!

Powder coat for a remarkably durable finish

The three “C”s of powder coating

Powder coating allows you to coat and cure metal parts in less than an hour and provides an extremely durable finish that is dent and chip resistant. It is far superior to liquid coatings – easy to apply with no drips or overspray and contains no environmentally harmful solvents. It is so superior that Eastwood’s HotCoat Powder Coating System was awarded the PA Governor’s Award for Environmental Excellence! Eastwood offers a full HotCoat line suitable for both home hobbyist use and industrial applications. HotCoat saves time and money while producing professional results.

hotcoat powder coating order 24/7 at eastwood.com48

For extreme durability, powder

Go from 15,000 Volts to 25,000 Volts with a flip of the switch

dual-Voltage Starter Kit gets You Up and running! includes:• (11676) Dual-Voltage Powder Coat gun • In-line air filter• Reusable tapered silicone high-temp plugs: 1/8”-7/8” • 1/2” high-temp masking tape• 1 lb. spool of .041” stainless steel safety wire • Set of 3 powder bottles and lids• 1/2 lb. of Gloss Black powder • Easy-to-follow instructions• FREE powder chip chart

Get complete information on all our Powder Coating Guns online – keyword: powder coating gUn

eastwood reinvents diY powder coating again with our dual-Voltage powder gun – delivering the ultimate, professional quality, powder-coat finish“True Dual-Voltage” means you can now select a normal setting to deliver a high 15,000-volt charge for hard-to-reach corners and interiors. And for those bigger jobs switch to the 25,000-volt charge for multiple-coat coverage over larger areas, increased powder adhesion and minimal overspray.This latest design from Eastwood, the innovators of DIY powder coating, combines knowledge and customer feedback gathered over the last 10 years, with the latest technologies in high-voltage power supplies. It all adds up to the ideal system for the do-it-yourself enthusiast. The new dual-voltage system allows you to use 15,000 volts to quickly and efficiently coat tight recessed corners and tube sections, while minimizing the Faraday Cage Effect. Switching to 25,000 volts allows you to coat any size object with speed, complete coverage, and one of the smoothest finishes on the market! What does this mean to you? Greater powder-transfer efficiency, less overspray and better coverage, producing show-quality results, all at the most affordable price on the market.

dual-Voltage gun includes:• (11676) Dual-Voltage Powder Coat gun (15-25 kw)• Power source • Easy-to-follow instructions• FREE powder chip chart!

11676 Dual-Voltage Powder Coating Gun $169.99

FREEpowder

chipchart!

FREEpowder

chipchart!

Save over $25! dual-Voltage powder gun Starter KitEverything you need to start powder coating today! Dual-voltage system gives you the capability to coat small areas using the low 15kv setting, or coat large areas using the high 25kv setting. Just supply your own a dedicated oven and compressed air.11698 Dual-Voltage Powder Gun Starter Kit Orig. $236.97 Save $26.98 $209.99

BESTVALUE