THURSDAY, JUNE 21 AT 9:00 A.M. (EDT)

9804�Reisterstown�Road,�Owings�Mills,�Maryland�21117,�USA(Baltimore�Area)

DUE�TO�PLANT�CLOSURE

OVER 1,500 LOTS INCLUDINGCNC MACHINE TOOLS &HUGE QUANTITY OF TOOLING

LIVE & WEBCAST

ASC CORPORATION

FOR�ADDITIONAL�INFORMATION�CONTACT�SUSIE�SPRINGER�(410)�654-7500,�EXT.�234�OR�E-MAIL�Susie.Springer@goindustry.com

(800) 722-3334http://www.goindustry.com

email: disposals-NA@goindustry.comNORTH AMERICAN OFFICES:

ARIZONA, MARYLAND, MICHIGAN, NEW YORK, ILLINOIS, FLORIDA,

CONNECTICUT, NEBRASKA, WASHINGTON, ONTARIO

ADDITIONAL OFFICES WORLDWIDE

Bid Live Online atwww.goindustry.com

OKUMA IMPACT LU35-2SC SLANT BED CNC TURNING CENTER, S/N 206

MATSUURA MDL. MC1000VS CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 82042813

OKAMOTO-LINE HMC 3000 CNC 5-AXIS HORIZONTAL MACHINING CENTER, S/N 33MC

NEW 1987

MORI SEIKI MH80 CNC HORIZONTAL 5-AXIS MACHINING CENTER, S/N 71

NEW 1986

NEW 1998

NEW 1982

2� 3

MORI SEIKI MV JUNIOR CNC VERTICAL MACHINING CENTER, S/N 927

MATSUURA MDL. MC500V25 CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 82082829

MATSUURA MDL. MC600 H-45 CNC 4-AXIS DUAL PALLET VERTICAL MACHINING CENTER, S/N 84023922

CNC�MACHINING�CENTERSOKAMOTO-LINE�Model�Online�HMC�3000�CNC�5-Axis�Horizontal�Machining�Center, 40-Position ATC, Auto. Oil Temperature Reg., Hydraulic Unit, 5" Spindle, Coolant, 39" x 118" Table, Way Covers, Fanuc 11 M CNC-CRT Controls, Tape Unit RS232 Port, 50 Taper, Spindle Speeds: 20 to 4,000 RPM, Max. Table Load 10,000 Lbs., Renishaw No. 17 Machine Interface, Ishowa Lube, Travels: X=120", Y=60", Z=30", Top of Table to Center Line of Spindle 6.1" to 66.1", Spindle Nose to Center Line of Table 7.64" to 30", Top of Table to Floor 30.7", Drive Motor 30 HP, S/N 33MC, 1987

MORI�SEIKI�Model�MH80�CNC�5-Axis�Horizontal�Machining�Center, Dual 31-1/2" Shuttle-Type Tables, Fanuc No. 11 MA CNC-CRT Controls, RS232 Port, Lube, Tokyo Keiki Oil Unit, 80-Position ATC, #50 Taper, Chip Conveyor, Table Indexing Angle 1°, Max. Table Load 1,500 kg, Travels: X=43.3", Y=31.5", Z=31.5", Spindle Speeds 10–3,600 RPM, Spindle Motor 15 kW, Spindle Dia. 3.9", S/N 71, 1986

MORI�SEIKI�Model�MV�Junior�CNC�Vertical�Machining�Center, 30-Position ATC, RS232 Port, Lube, 16 x 35 Table, Coolant, Automatic Oil Temperature Reg., Yasnac MX2 CNC-CRT Controls, BT 40 Taper, 3-Axis, Travels: X=22", Y=16", Z=18", 6,000 RPM Spindle, S/N 1027, 1986

MORI�SEIKI�Model�MV�45/40�CNC�Vertical�Machining�Center, 30-Position ATC, Cooler, 18 x 47 Table, Lube, 10,000 RPM Spindle, Fanuc 15MA CNC-CRT Controls, RS232 Port, Travels: X=31.5", Y=18.11", Z=20.08", No. 40 Taper, S/N 1332, 1993

MORI�SEIKI�Model�MV�Junior�CNC�Vertical�Machining�Center, 16-Position ATC, RS232 Port, Lube, 16 x 35 Table, Coolant, Yasnac MX2 CNC-CRT Controls, 3-Axis, BT 40 Taper, Travels: X=22", Y=16", Z=18", 6,000 RPM Spindle, S/N 927, 1986

MATSUURA�Model�MC500V25�CNC�4-Axis�Vertical�Machining�Center, Automatic Oil Temperature Reg., Lube, 20-Position ATC, 15 x 34 Table, Yasnac MX5 CNC-CRT Controls, RS232 Port, Coolant, BT 35 Taper, Travels: X=510mm, Y=330mm, Z=460mm, Spindle Speeds 120–4,000 RPM, S/N 82082829, 1982

MATSUURA�Model�MC1000VS�CNC�4-Axis�Vertical�Machining�Center, 25-Position ATC, Automatic Oil Temperature Reg., 19 x 47 Table, Chip Conveyor, Yasnac MX5 CNC-CRT Controls, RS232 Port, Coolant, Way Covers, BT 40 Taper, Travels: X=40", Y=20", Z=20", Spindle Speeds 100–6,000 RPM, S/N 82042813, 1982

MATSUURA�Model�MC�600�H-45�CNC�4-Axis�Dual�Pallet�Horizontal�Machining�Center, Chip Conveyor, Fanuc 6MB CNC-CRT Controls, Daikin Oil Cooler, Hydraulic Unit, Pallet 18" x 18" Each, 50-Position ATC, Thru Spindle Coolant, No. 40 Taper, Spindle Speeds 30–6,000 RPM, Spindle Motor 15 HP, Travels: X-23.62", Y=17.71", Z=18.90", No. 40 Taper, S/N 84023922, 1984

MATSUURA�Model�MC2000V�CNC�Vertical�4-Axis�Machining�Center, Way Covers, 40-Position ATC, Fanuc 6MB CNC-CRT Controls, RS232 Port, Daikin Oil Cooler, 30 x 82 Table, Tailstock, 50 Taper, Travels: X=80.31", Y=30.7", Z=29.52", Spindle Speeds 20–3,600 RPM, Spindle Motor 15 kW, S/N 82022555, 1982

<MORI SEIKI MV JUNIOR CNC VERTICAL MACHINING CENTER, S/N 1027

NEW

1986

NEW

1986 NEW

1982

MORI SEIKI MV45/40 CNC VERTICAL MACHINING CENTER, S/N 1332

NEW 1993

NEW 1984

2� 3

CNC�MACHINING�CENTERS,�(continued)MATSUURA�Model�MC�800�V�CNC�3-Axis�Vertical�Machining�Center, Coolant, 30-Position ATC, Lube, Yasnac MX2 CNC-CRT Control, RS232 Port, Way Covers, 18" x 46" Table, BT 40 Taper, Travels: X=31.5", Y=18.1", Z=20", Spindle Speeds 25–4,500 RPM, Spindle Motor 7.5 HP, S/N 85065046, 1986

MATSUURA�Model�MC-500V-DC�Twin�Spindle�CNC�4-Axis�Vertical�Machining�Center, Coolant, RS232 Port, Tape Unit, Matsuura MX1 CNC-CRT Control, (2) 20-Position ATCs, 15 x 34 Table, BT 35 Taper, Travels: X=20", Y=14.1", Z=17.7", Spindle Speeds 60–6,000 RPM, S/N 84054006, 1984

CINCINNATI�Model�Milacron�10HC-2500-A�CNC�Horizontal�Machining�Center, 31 x 104 Table, 30-Position ATC, Hydraulic Unit, Way Covers, Acramatic MC CNC-CRT Controls, Greco CNC Mini-File, Travels: X=100", Y=40", Z=30", Spindle 10 HP, Spindle Speeds 20–4,000 RPM, S/N 48949

CINCINNATI�Model�DM-5H-2500�CNC�Horizontal�Boring�Machine, Hydraulic Unit, Way Covers, 4-Axis, 31 x 102 Table, Pendant Control, Acramatic 5 NC Controller w/Numeritronix Exec 1501 CNC-CRT Control, 85–3,800 RPM, 1-5/8" Spindle, Travels: X=100", Y=40", S/N 5513H5-74-5

CINCINNATI MILACRON MDL. 10HC-2500-A CNC HORIZONTAL MACHINING CENTER, S/N 48949

CINCINNATI MDL. DM-5H-2500 CNC HORIZONTAL BORING MACHINE, S/N 5513H5-74-5

MATSUURA MDL. MC800V CNC 3-AXIS VERTICAL MACHINING CENTER, S/N 85065046

NEW 1986

MATSUURA MDL. MC2000V CNC VERTICAL MACHINING CENTER, S/N 82022555

NEW 1982

MATSUURA MDL. MC-500V-DC TWIN SPINDLE CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 84054006

NEW 1984

4� 5

CNC�TURNING�CENTEROKUMA�Model�LU35-2SC�Okuma�Impact�Slant�Bed�CNC�Turning�Center, (2) 10-Position Turrets, Tailstock, Kitagawa 12" 3-Jaw Chuck, Chip Conveyor, Okuma 0SP700L CNC Controls, Swing Over Bed 29.13", Length 59", (4) Controlled Axes, Swing Over Crosslide 18.90", Distance Between Centers 33.46", Max. Turning Diameter x Length 21.65" x 36.22", Spindle Diameter 5.12", Spindle Nose Type JIS A2-8, Thru Spindle Hole 3.54" Spindle Speeds 14–3,200 RPM, Spindle Motor 40/30 HP, Travels: X=Upper 10.83" + 4.13", Lower 7.09" + 2.76", Z=Upper 36.22", Lower 34.45", S/N 206, 1998

CNC�MILLSCINCINNATI�Model�2H100�Milacron�“Cintimatic"�4-Axis�CNC�Horizontal�Boring�Mill, ESD Retrofit R.M.F. 100" Horizontal Cintimatic, Way Covers, Hydraulic Unit, Acramatic 850 SX CNC-CRT (Full Control) Control, 31 x 102 Table, S/N 55131H55W0018RL92, 1992

CINCINNATI�Hydrotel�Triple-Spindle�Vertical�CNC�Milling�Machine, 16–1,600 RPM, 28' x 144" Table, Way Covers, M/N 30 x 120 Vertical Hydrotel, Coolant, Pendant Control, Acramatic NC CNC-CRT Controls, Greco CNC Mini-File, 24" Spindle C/L, 50 Taper, Travels: X=120", Y=30", Z=14", S/N 5H3V5T-2-AR-74

DeVLIEG�Model�JMC�4340�CNC�5-Axis�Mill, Way Covers, 48-Position ATC, 30" x 40" Table, Trabon Lube, DeVlieg NC Tapac 550 Controller, 4" Spindle, No. 50 Taper, Mist and Flood Coolant, Nickle-Plated Bedway Covers, Travels: X=40", Y=50", Z=16", W=16", 15 HP, Optional 2-5/8" Spindle, Taper 50CT, S/N 9742

JIG�BORERSMOORE�#B18�Jig�Borer, C-Tek 2-Axis DRO, 11 x 24 T-Slot Table, 0–2,500 RPM, S/N 1812, 1981

MOORE�Model�B18�Jig�Borer, 11 x 24 Table, Modified Vari-Speed Motor Drive System, 0–2,500 RPM, S/N B1714

(3)�MOORE�Model�3�Jig�Borers, 11 x 24 Table, 0–2,500 RPM, Power Feed Table, S/Ns B468, B363, & B826.

CNC�LATHESOKUMA�Model�LC30�CNC�Lathe, 3,000 RPM, RS232 Port, Daikin AK530 Oil Cooler, Lube, Chip Conveyor, Tailstock, 12" 3-Jaw Chuck, Okuma OSP5000L-G CNC Control, 12-Position Tool Turret, Swing Over Bed 500mm, Max. Turn Diameter 450mm, Spindle Speeds 15–3,000 RPM, Travels: X=230mm, Y=800mm, Z=520mm, 1985

HARDINGE�Model�ASM�Automatic�Second�Operation�Lathe, 3.6 HP, Lype Rollways Pneumatic Bar Feed, 6-Position Tool Turret, Dual Tool Posts, Coolant, S/N ASMC-525

HARDINGE�Model�HLV�Second�Operation�Lathe, 125–3,000 RPM, Tool Post, Tailstock, Dovetail Bed, Carriage Feed, Coolant, Collet Chuck

MORI�SEIKI�Model�LL-7B-2500�LL-7�CNC�Lathe, 4-Way Tool Post, Rear Boring Turret, Tailstock, Chip Conveyor, Coolant, Fanuc 6TB CNC-CRT Controls, RS232 Port, 32" Chuck, Lube, 8.5" Spindle Hole, Type B, Travel Size Swing Over Bed 39.3", Approximate Center Distance 96", Max. Cross Travel 21.6", Swing Over Crosslide 20.4", Spindle Speeds 8–750 RPM, Mail Motor 49 HP, S/N 151, 1981

CINCINNATI MILACRON 2H100 CINTIMATIC 4-AXIS CNC HORIZONTAL BORING MILL, S/N 55131H55W0018RL92

CINCINNATI HYDROTEL TRIPLE SPINDLE VERTICAL CNC MILL, S/N 5H3V5T-2-AR-74

DeVLIEG JMC4340 CNC 5-AXIS MILL, S/N 9742

OKUMA MDL. LC30 CNC LATHE MORI SEIKI MDL. LL-7B-2500 CNC LATHE, S/N 151

NEW

1981

RETROFIT

1992

NEW 1985

4� 5

INSPECTIONSIP�CNC�Coordinate�Measuring�Machine, Type No. SIP-CMM5, 30 x 33 T-Slot Table, Digital Microvax 3100 Computer, Digital LA324 Multiprinter, Hewlett-Packard 7550A Graphics Plotter, Dynapic Controller, Greco CNC Milifile System, SIP Probe, “Concerto” Software, Travels: X=27.95", Y=21.65", Z=21.65", Distance Between Uprights 36.22", Height Under Crossbeam 32.7", S/N 102, 1991

SHEFFIELD�CORDEX�Model�1820�CNC�Vertical�Arm�Coordinate�Measuring�Machine, G+C Remote Control Unit, Measurement Processor, 3-Axis DRO Computer, 3' x 6' Table, Renishaw PH9/MK2, Travels : X=78.7 ", Y=35.4/39.4", Z=15.8"/27.6"/39.4", Work Table Area 81.9" x 40.4", 1985

BENDIX�CORDAX�Model�1808�Vertical�Arm�Coordinate�Measuring�Machine, Bendix MP-3 Measurement Processor, 3-Axis DRO, Travels: X=29.5", Y=24.5", Z=19.7 " , Wo r k Ta b l e 31. 5 " x 2 6 . 6 " , S/N 2-4384-1083, 1983

BENDIX-CORDAX�Model� 1000�CNC�Coordinate�Measuring�Machine, 3-Axis DRO, Computer Controls, Renishaw PH 6 Probe, 19" x 30" Table, S/N 2-2621-0179; Optical Comparators; Vacuum Chambers; And Surface Plates.

Several�14"�Optical�Comparators.

EDMONA-ELTEE�Model�SN320�Sinker-Type�CNC�EDM�Machine, No. IN260, .057 KVA w/Poll-Spark CNC Control S/N 199/2871/8302, 3-Axis, Controller No. ONA S-2000/60 Acopto, Filter, 16" x 25.5" T-Slot Table, System Nol Filtro SN320, System 3R Tooling, 1982

ONA-ELTEE�Model�260�Sinker-Type�CNC�EDM�Machine, 0.57 KVA w/Poll-Spark CNC Control S/N 103-2595/8202, 3-Axis, Controller No. ONAPULS-60, Filter System Filtro I-260, 16" x 25.5" T-Slot Table, System 3R Tooling, S/N 2595/8202, 1982

GRINDERSTOYODA�Type�GUP32x100�Cylindrical�Grinder, Model RB7574, w/Drop Down Internal Grinding Head, 13" Diameter x 3/4" Gr. Wheel, 1,360–6,560 RPM, Coolant, Swivel Wheelhead, Swing Over Table 320mm, Max. Distance Between Centers 1,000mm, Max. Diameter to Be Ground 280mm, Spindle Speeds (Workhead) 16–250 RPM, S/N LG3270-2, 1984

THOMPSON�Hydraulic�Surface�Grinder, Walker 8 x 24 Electro-Magnetic Chuck

THOMPSON�Surface�Grinder, 8 x 24 Permanent Magnetic Chuck

THOMPSON�Surface�Grinder, 6 x 18 Permanent Magnetic Chuck

BROWN�&�SHARPE�No.�2�Surface�Grinder, 6" x 18"

BROWN�&�SHARPE�No.�618�Micromaster�Sur face� Gr inder, 6 x 18 Pe rm a ne nt Magnetic Chuck

BROWN�&�SHARPE�No.� 1�Universal�Cylindrical�Grinder

BLANCHARD�No.�22K-42�Rotary�Surface�Grinder, 42" Magnet, 22" Segmented Wheel

(2)�CINCINNATI�Model�2�Tool�and�Cutter�Grinders

JONES� &� LAMSON� Mode l � TG636�Universal�Automatic�Thread�Grinder

EX-CELL-O�Model�74-A�Vertical�Precision�Center�Lapping�Machine

SIP CNC COORDINATE MEASURING MACHINE, S/N 102

SHEFFIELD CORDAX NO. 1820 CNC VERTICAL ARM COORDINATE MEASURING MACHINE

ONA-ELTEE SN320 SINKER-TYPE CNC EDM, S/N 2871-8302

BENDIX CORDAX NO. 1808 VERTICAL ARM COORDINATE MEASURING MACHINE, S/N 2-4384-1083

TOYODA GUP32X100 CYLINDRICAL GRINDER, S/N LG3270-2

BLANCHARD NO. 22K-42 ROTARY SURFACE GRINDER, S/N 12445

1985 1983

1991

1983

1984

CHUCKERSHARDINGE� Mode l � HNC� NC�Chucker, 2.5 HP, w/GE Mark Century 550 NC Controls, GE U-Store Memory System, S/N HNC-151(3)�HARDINGE�Model�HC�Chucker, 1.5 HP, 125–3,000 RPM, Carriage Feed, Threading Attachment, Collet Chuck, 8-Position Tool Turret, Coolant, Dial Gauge, S/N’s HC-229A, HC-1753-F, HC-1753-EWARNER � & � SWASEY � Au to .�Chucker, Model M-3830 0-AC, Lot 13, 58–2,507 RPM, S/N 1981076

MILLS(27)�BRIDGEPORT�2�HP, 1-1/2�HP�and�1�HP�Vertical�Mills

C INCINNATI� Model � J#83093�Vertical�Mill

C INC INNATI � “ Ve r s i p owe r ”�Horizontal�Mill, w/Universal Vertical Head, 25 x 116 Table

CINCINNATI� “Hypowermatic”�Horizontal�Mill

K E A R N E Y � & � T R E C K E R�M I LWAU K E E � M o d e l � 6 2 5T F�Horizontal�Mill, 19 x 107 Table

LATHESHARDINGE�Model�HLV-H�High-Speed�Super�Precision�Tool�Room�Lathe

HARDINGE�Model�VBS�Second�Operation�Lathe

(2)�HARDINGE�Model�DSM-59�Second�Operation�Lathes

AMERICAN�PACEMAKER�Engine�Lathe, 36" x 96", Steady Rest

DoALL�17"�x�60"�Engine�Lathe

(3)�MONARCH�Engine�Lathes

MONARCH�32"�NN�Heavy�Duty�Engine�Lathe, 24" 4-Jaw, Steady Rest, 40" x 156" Cap.

(2)�PRATT�&�WHITNEY�Model�C�Engine�Lathes

SOUTH� BEND� A� 9 "� Precis ion�Lathe

SHEARSCINCINNATI�Model�1812�Power�Squaring� Shear, 12' Wide x 1/4" Capacity, 105.6 Squaring Arm, Front Oper. Back Gage, S/N 30881

PEXTO�Model�12U4D�4'�Power�Shear

6� 7

CINCINNATI VERSIPOWER HORIZONTAL MILL, S/N 9J72H5R1

ASSORTED BRIDGEPORT VERTICAL MILLS

MONARCH ENGINE LATHE, S/N 39091 (2) CINCINNATI HYPOWERMATIC HORIZONTAL MILLS

AMERICAN PACEMAKER ENGINE LATHE, S/N 70758-48

MONARCH 32" NN ENGINE LATHE, 40" x 156" CINCINNATI 1812 POWER SQUARING SHEAR, S/N 30881

CINCINNATI 14' PRESS BRAKE

27 AVAILABLE

HARDINGE MDL. HCN NC CHUCKER, S/N HNC-151

6� 7

FILTER I HYDROTRON HWF-5-50-10 DUST COLLECTOR, S/N 05-300-24-292

DoALL C-1216A AUTOMATIC HORIZONTAL BAND SAW, S/N 373-81650

DoALL MP20 20" VERTICAL CONTOUR BAND SAW, S/N 32-53714

MILLER SYNCROWAVE 300 AC/DC ARC WELDERBENCH VISES

TOOL HOLDERS

TOOL HOLDERS

�PRESS�BRAKESCINCINNATI�14'�Overall�Mechanical�Press�Brake, 175-Ton, S/N 31493

5'�x�8'�x�7"�Thick�Steel�Layout�Table, w/T-Slots

HUGE�QUANTITIES�OF�PROGRAMMABLE�ROTARY�TABLES,�TOMBSTONES,�

SET-UP�PLATES�&�RECTANGULAR�BLOCKS

BRIDGE�CRANES/�JIBS/HOISTS

ABELL-HOWE�3-Ton�Bridge�Crane, Bottom Running, Approx. 22' Wide, Approx. 30' Travel, w/Coffing 1-Ton Elec. Chain Hoist, and Pendant Control, S/N 83-17863, 1983

Gantry�Crane, 20' Wide x 10' High, 1/2 Ton Capacity, w/Ingersoll-Rand 1/2 Ton Pneumatic Chain Hoist

(11)�ABELL-�HOWE�1-�to�3-Ton�Pole�Mounted�Jibs

DRILLSMORRIS�“Mor-Speed”�Radial�Drill, 150–3,000 RPM, 9" Col. x 4' Arm, Rotating 360° Tilting Box Table, S/N G1629

NATCO�24�Spindle�Drill, S/N F1B-262

TUBE�BENDERCONRAC-LEONARD�Synchrobend�5/8"�Manual�Tube�Bender

HONEEXTRUDE�77C�Hone, Vertical, Hydraulic, 6" Diameter Cylinder, Media and Cycle Counters, Clamp Force 7 Ton, 300–1,500 PSI, Dist. Bet. Columns 13", Max. Opening 9", 5 HP Motor, S/N M84-0408, 1983

MATERIAL�HANDLINGHYSTER�E60-XM-33�Electric�Riding�Forklift, 4,250 Lb. Capacity, 4 Stage Mast, 240" Max. Lift, 48" Forks, 36 Volt, Headlights, Cushion Tires, Rear Light, Side Shift, Late Model, S/N F108V17316W, 1999

HYSTER�E60-XM-33�Electric�Riding�Forklift, 4,250 Lb. Capacity

PLANT�SUPPORTAIRTEK�408Q�Aircooled�Aftercooler, S/N 500-F90-496

AIRTEK�AR300�Refrigerated�Air�Dryer, 200 Max. PSI, 320 SCFM, S/N 90-5205C, 1990

FILTER/HYDROTRON�HWF5-50-10�Dust�Collection�System, 10 HP, 5,000 CFM, S/N 05-300-24-292

( 2 ) � QU INCY� Tank � Mounted � A i r�Compressors, 15 HP Each

QUINCY�Tank�Mounted�Air�Compressor, 5 HP

MISCELLANEOUSBand�Saws;�Welders;�Keyseaters;�Ultrasonic�Cleaners;�Parts�Washers;�Polishers;�Spray�Booth;�Ovens;�Pumps;�Storage�Racks

OVER�(500)�LOTS�OF�PERISHABLE�TOOLING�&�TOOL�

HOLDERS,�HAND�TOOLS

VEHICLESCHEVROLET�G30�Van, 184,181 Miles, 1995

SUBARU�Outback�Legacy�AWD�Station�Wagon, 163,136 Miles

OFFICE�FURNITURE�&�EQUIPMENT

Assorted�Office�Furniture�and � Equ ipment , D e s k s , Chairs, File Cabinets, Safe File, Tables, Bookcases, Calcomp #1043 Color Plotter, Assorted C o m p u t e r s , C o n f e r e n c e Ta b l e , I s o t e c Te l e p h o n e S y s t e m , C a n o n H 12 2 5 0 FaxPhone L80, Xerox 2510 Blueprint Copier, Savid 9122 DL Copier w/Auto Feed

2005

1981

OVER 1,500 LOTS INCLUDING CNC MACHINE TOOLS & HUGE QUANTITY OF TOOLING

DUE�TO�PLANT�CLOSURE

TERMS�OF�SALENO�WARRANTIES:�Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE IS AND WITHOUT RECOURSE,” and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise.Some items subject to prior sale and removal.PAYMENT:�May be made by cash, certified funds or company check with a confirming letter of guarantee from an acceptable issuing bank. SAMPLE BANK LETTER: This bank guarantees payment to GoIndustry from (name of customer) on account # up to the amount of $ . This letter is valid for purchases at the ASC Corporation Sale, Thursday, June 21, 2007.America Express, Visa, and MasterCard will be accepted for this sale.BUYERS�PREMIUM:�A buyer’s premium of 12.5% will be added to the bid price for each lot if paying by cash, certified funds, or company check with a confirming letter of guarantee from an acceptable issuing bank. A buyer’s premium of 15% will be added to the bid price for each lot if paying by credit card. An additional 2.5% is charged on all lots purchased via the GoWebcast Facility and is added to the final sale price.For complete Terms of Sale, visit our website at www.goindustry.com

INSPECTIONWednesday, June 20, from 10:00 A.M. to 4:00 P.M. (EDT)

REMOVALAll small items must be removed by Friday, June 29, 2007 and all large items must be removed by Friday, July 13, 2007.

CONTACT�INFORMATIONFor further information, contact Susie Springer (410) 654-7500, ext. 234 or e-mail Susie.Springer@goindustry.com

AIRPORT/AIRLINE�INFORMATIONBWI Airport

This�Sale�will�be�a�“Webcast”�auction,�which�enables�you�to�bid�securely�in�real-time�from�the�comfort�of�your�own�computer.�To�utilize�this�service,�register�with�GoIndustry�at�www.goindustry.com.�To�learn�more�about�how�a�

webcast�works,�please�go�to�the�Support�section�on�our�homepage�and�choose�“Webcast�Instructions.”

ASC�CORPORATIONTHURSDAY, JUNE 21 AT 9:00 A.M. (EDT)

IP-7210210

www.industrialauctioneers.org

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

POSTMASTER:�Dated Material.Please Deliver Promptly.

FIRST�CLASS�MAIL

http://www.goindustry.com

e-mail: disposals-NA@goindustry.com

NORTH�AMERICAN�OFFICESARIZONA, MARYLAND, MICHIGAN, NEW YORK, ILLINOIS, FLORIDA, CONNECTICUT,

NEBRASKA, WASHINGTON, ONTARIO, ADDITIONAL OFFICES WORLDWIDE

EXECUTIVE�OFFICES11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117(410) 654‑7500 • (800) 722‑3334 • Fax (410) 654‑5876

LOCAL SERVICE WITH GLOBAL REACH — OFFICES IN OVER 20 COUNTRIES

INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED

DIRECTIONSFrom�BWI�Airport:�Bear left toward I-95W (signs for hourly parking). Slight left at I-95W (signs for Airport Exit/I-95W), proceed 4 miles. Take Exit 4A to merge onto I-95N toward I-695/Baltimore, proceed 3 miles. Take Exit 49B on the left to merge onto I-695N toward I-70/I-83/Towson, proceed 11 miles. Take Exit 20 for Reisterstown Road/MD-140N toward Garrison. Merge onto MD-140W/Reisterstown Road, watch for auction signs. Distance from airport to sale location is approximately 20 miles.

HOTEL�ACCOMMODATIONSHilton Garden Inn Owings Mills 4770 Owings Mills Boulevard Owings Mills, Maryland, 21117 Tel: (410) 654-0030 AmeriSuites 4730 Painters Mill Road, Owings Mills, Maryland 21117 Tel: (410) 998-3630

FINANCING�YOUR�AUCTION�PURCHASEConserve Your Cash and Increase

Your Bidding Power. AuctionLease Provides M&E Financing With

Approvals from $5,000 to $999,000. (800) 438-1470

Apply Online: www.AuctionLease.com“Buy What Appreciates, Lease What

Depreciates.” -J. Paul Getty

GoIndustry�Appraisal�Services

GoIndustry’s�professional�appraisal�department�values�machinery,�

equipment�and�inventory�throughout�the�world.�From�small�quantities�to�multiple�

plants,�our�large�accredited�staff�is�available�to�service�your�appraisal�needs.�

USPAP�compliant�and�accepted�by�major�financial�institutions.�

Executive�Offices:�(800)�722-3334Call�today�for�a�no�obligation�quote.

Some items may be subject to prior sale.

AUCTIONSITE

AIRPORT