dust collectors · dust collectors description • silo venting filter n1500 is a cylindrically...
TRANSCRIPT
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
HENNLICH ENGINEERING is the leading manufacturer of air dust collectors.We produce low-performance standalone dust collectors for local filtration as well as high-performance modular dust collectors which can be easily combined to assemblies with the required flowrate.
BENEFITS• control of dust pollution• avoidance of penalties imposed by authorities for dust • JET-PULS recovery system• residual concentration < 10 mg/m3 (on request < 1 mg/m3)• unit assembly construction• easy maintenance & simple operation• compact design
APPLICATIONS & INDUSTRIES• storage silos & bunkers• transfer points of belt conveyors• mines & quarries• coal handling• food industry• wood processing• steel & slag• chemical industry• welding & grinding• foundries
OUR CUSTOMERS
INTRODUCTION
DUST COLLECTORS
● SITA SUEZ ● PKN Orlen ● Ethanol Energy● ČEZ ● Saint Gobain ● Veolia Group ● Seiko Flowcontrol ● C-Energy ● Irkutskenergo ● Č.O.B. Beňov ● OMYA-Ural ● Novo-Irkutskaya TES ● Carbo Energia ● ACL Technology ● Severozapadnaya fosfornaya kompaniya ● Keramost ● ERMAC ● Kaluzhskii metallurgiceskii zavod ● Dneprostal ● Kazakhmys ● Saicanature● Target ● Holcim ● Ivano-Frankovskcement● Lafarge ● Carmeuse ● Morfico
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
The dust collector is designed with the following parameters:• requested flow rate and filter area• dust physical properties (abrasive, corrosive, explosive etc.)• application type (silo dedusting, local filtration, central dedusting)• rest dust manipulation method (rotary feeder, dust collection box, back to silo or belt conveyor etc.)• location (inside, outside) and the construction dimensions • temperature (ambient, product)
Air volume Flow rate (m3/h) Line Type Filter area (m2) Chapter Application
lowup to 1 000
N
N1000 15,0 1.1. silo dedusting
N1000 V 15,0 1.2. silo dedusting, local filtration
N1000 V/KN 15,0 1.3. silo dedusting, local filtration
1 000-1 500N1500 24,0 1.4. silo dedusting
N1500 V 24,0 1.5. silo dedusting, local filtration
middle
up to 1 000
P
P0600 17,8 2.1. silo dedusting, local filtration1 000-1 800 P1200 35,6 2.2. silo dedusting, local filtration1 800-2 700 P1500 44,5 2.3. silo dedusting, local filtration1 800-2 700 P1500/KR3 44,5 2.5. local filtration2 700-4 000 P1500/5,5 44,5 2.4. local filtration2 700-4 000 P1500/KR5,5 44,5 2.6. local filtration
high
3 800-5 940
M
M1500-1-18 95,0 3.1. industrial filtration
5 100-8 240 M1500-1-24 118,0 3.2. industrial filtration
6 000-8 400 M2000-1-18 118,0 3.3. industrial filtration
6 000-12 000 M2000-1-24 158,0 3.4. industrial filtration
10 000-15 500 M2000-2-36 236,0 3.5. industrial filtration
16 600 M2000-1-24 158,0 3.6. industrial filtration
13 500-21 000 M2000-2-48 316,0 3.7. industrial filtration
15 000-23 500 M2000-3-54 354,0 3.8. industrial filtration
20 000-31 500 M2000-3-72 474,0 3.9. industrial filtration
M2000-4-72 474,0 3.10. industrial filtration
27 000-42 000 M2000-4-96 632,0 3.11. industrial filtration
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.1. TYPE N1000
DUST COLLECTORS
DESCRIPTION • silo venting filter N1000 is a cylindrically shaped dust
collector for dedusting of pneumatically filled silos
OPERATION QUALITIES• flow rate 1000 m3/h• filter area 15 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 97 kg
DESIGN• carbon steel pressure resistant body• dust collector body diameter 600 mm• filtered air blows away through the hole between casing and
top cover• filter element: 1x filter cartridge
made of polyester in basic designdiameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component • perfect recovery of filter element with built-in JET-PULS system
Silo venting filter N1000 is a cylindrically shaped dust collector. It is mainly used for dedusting of pneumatically filled silos.
A
A
916x Ø
936
650Ø
596Ø
680Ø
1373
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.1. TYPE N1000
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.2. TYPE N1000 V
DUST COLLECTORS
DESCRIPTION • silo venting filter N1000 V is a cylindrically shaped dust
collector for dedusting of silos
OPERATION QUALITIES• flow rate 1000 m3/h• filter area 15 m2
• fan 1,5 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 138 kg
DESIGN• carbon steel pressure resistant body• dust collector body diameter 600 mm• filter element: 1x filter cartridge
made of polyester in basic designdiameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component • perfect recovery of filter element with built-in JET-PULS system
Silo venting filter N1000 V is a cylindrically shaped dust collector. It is mainly used for dedusting of silos and for local filtration.
A
A
916x Ø
650Ø596Ø
680Ø
1450
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.2. TYPE N1000 V
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.3. TYPE N1000 V/KN
DUST COLLECTORS
DESCRIPTION • silo venting filter N1000 V is a cylindrically shaped dust
collector with dust collection box and support construction• suitable for local dedusting (for example – big bags, welding
operations etc.)
OPERATION QUALITIES• flow rate 1000 m3/h• filter area 15 m2
• fan 1,5 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 206 kg
DESIGN• carbon steel pressure resistant body• dust collector body diameter 600 mm• filter element: 1x filter cartridge
made of polyester in basic designdiameter 325 mm, lenght 1000 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)• dust collection box and support construction
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component • perfect recovery of filter element with built-in JET-PULS system
Silo venting filter N1000 V/KN is a cylindrically shaped dust collector. It is equipped with the support construction and the dust collection box. It is mainly used for local filtration.
A
A
738,
5
645O
1835
O16
1413
,5
B B
900
900
770
830
662
220
O
385
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.3. TYPE N1000 V/KN
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.4. TYPE N1500
DUST COLLECTORS
DESCRIPTION • silo venting filter N1500 is a cylindrically shaped dust
collector for dedusting of pneumatically filled silos
OPERATION QUALITIES• flow rate 1500 m3/h• filter area 24 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 132 kg
DESIGN• carbon steel pressure resistant body • dust collector body diameter 600 mm• filtered air blows away through the hole between casing and
top cover• filter element: 1x filter cartridge
made of polyester in basic designdiameter 325 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component • perfect recovery of filter element with built-in JET-PULS system
Silo venting filter N1500 is a cylindrically shaped dust collector. It is mainly used for dedusting of pneumatically filled silos.
A
A
936
1373
Ø90
5Ø
865
Ø84
0Ø
800
Ø9,5
Ø13
500
1873
1260
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.4. TYPE N1500
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.5. TYPE N1500 V
DUST COLLECTORS
DESCRIPTION • silo venting filter N1500 V is a cylindrically shaped dust
collector for dedusting of silos
OPERATION QUALITIES• flow rate 1500 m3/h• filter area 24 m2 • fan 2,2 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 173 kg
DESIGN• carbon steel pressure resistant body • dust collector body diameter 600 mm• filter element: 1x filter cartridge
made of polyester in basic designdiameter 325 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• electromagnetic valve (1 pc), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Silo venting filter N1500 V is a cylindrically shaped dust collector. It is mainly used for dedusting of silos and for local filtration.
A
A
1450
Ø 800Ø 840Ø 865Ø 905
Ø 9,5
Ø 13
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
1. SILO VENTING FILTERS (N-SERIES)1.5. TYPE N1500 V
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.1. TYPE P0600
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
OPERATION QUALITIES• flow rate 1000 m3/h• filter area 17,8 m2
• fan: 1,5 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 195 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 600 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• electric control box: 3 x 400 VAC, 50 Hz• dust collection box or rotary feeder with support construction• noise silencer• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P0600 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc.
687
B B
900
1539
,5
1109,5
817
750
750690
690
75120
480
75 120 480 9
9
O9
750599
807
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.1. TYPE P0600
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.2. TYPE P1200
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
OPERATION QUALITIES• flow rate 1800 m3/h• filter area 35,6 m2
• fan: 2,2 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 276 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 1200 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• electric control box: 3 x 400 VAC, 50 Hz• dust collection box or rotary feeder with support construction• noise silencer• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P1200 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc.
A
A
1539
,5600
425
520
750
828
1194
2139,5
B B
750
750690
690
75 120 120 120 120 120
75120
120
120
120
120
O8
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.2. TYPE P1200
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.3. TYPE P1500
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
OPERATION QUALITIES• flow rate 2700 m3/h• filter area 44,5 m2
• fan: 3,0 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 320 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• electric control box: 3 x 400 VAC, 50 Hz• dust collection box or rotary feeder with support construction• noise silencer• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P1500 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc.
A
A
1577
900
725
520
750
828
2477
B B
750
750
690
690
75 120 120 120 120 120
75120
120
120
120
120
O8
732
732
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.3. TYPE P1500
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.4. TYPE P1500/5,5
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
OPERATION QUALITIES• flow rate 4000 m3/h• filter area 44,5 m2
• fan: 5,5 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 327 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)
ADDITIONAL ACCESSORIES• electric control box: 3 x 400 VAC, 50 Hz• dust collection box or rotary feeder with support construction• noise silencer• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P1500/5,5 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc.
A
A
1577
900
725
520
750
828
2477
B B
750
750
690
690
75 120 120 120 120 120
75120
120
120
120
120
O8
732
732
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.4. TYPE P1500/5,5
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.5. TYPE P1500/KR3
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
• equipped with dust hopper, support construction and rotary feeder
OPERATION QUALITIES• flow rate 2700 m3/h• filter area 44,5 m2
• fan: 3,0 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 519 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • support construction with dust hopper• rotary feeder 250 x 250, 0.55 kW• electric control box: 3 x 400 VAC, 50 Hz
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P1500/KR3 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc. It is equipped with the support construction, dust hopper and rotary feeder.
A
A
900
807
599
1577
1670
,5
1416
233
300
630
B B
C C
3560
1083
1083
2029
807
6
200
275O
200
166
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.5. TYPE P1500/KR3
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.6. P1500/KR5,5
DUST COLLECTORS
DESCRIPTION • box-shaped dust collector for dedusting of storage silos,
belt conveyor transfer points, welding and cutting machines etc.
• equipped with dust hopper, support construction and rotary feeder
OPERATION QUALITIES• flow rate 4000 m3/h• filter area 44,5 m2
• fan: 5,5 kW • residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6 Nm3/h• pressure loss 1500 Pa• weight: 549 kg
DESIGN• carbon steel pressure resistant body• filter element: 9x filter cartridge
made of polyester in basic designdiameter 145 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • support construction with dust hopper• rotary feeder 250 x 250, 0.55 kW• electric control box: 3 x 400 VAC, 50 Hz
ADDITIONAL ACCESSORIES• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C• available also with mechanical filter cartridge recovery
BENEFITS• robust design• easy filter element replacement• low dust emission level • excellent access to every filter component• perfect recovery of filter element with built-in JET-PULS system
Dust collector P1500/KR5,5 is a box-shaped device. It is used for local filtration - dedusting of storage silos, belt conveyor transfer points, welding operations etc. It is equipped with the support construction, dust hopper and rotary feeder.
A
A
900
807
599
1577
1670
,5
1416
233
300
630
B B
C C
3560
1083
1083
2029
807
6
200
275O
200
166
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
2. LOCAL DUST COLLECTORS (P-SERIES)2.6. P1500/KR5,5
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.1. TYPE M1500-1-18
DUST COLLECTORS
DESCRIPTION • one-box shaped dust collector for local or central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 3 800 - 5 940 m3/h• filter area 89 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6-8 Nm3/h• pressure loss 1500 Pa
DESIGN• 1x filter box made of carbon steel• damping chamber to reduce the noise from the fan• filter element: 18x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (3 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h)
Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/min)
3 800 5,5 3 950 0,903 800-4 800 7,5 3 950 1,124 800-5 940 9,2 4 200 1,39
Dust collector M1500-1-18 is a one box-shaped device. It is used for local or central filtration in various industrial areas with non-stop operation. It is equipped with the built-in fan and dust hopper with support construction.
800
2 297
5 488
1 500
2 970
1 358
2 970
370
250
335
112
�18
2 297
780 530
1 942
4 647
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.1. TYPE M1500-1-18
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.2. TYPE M1500-1-24
DUST COLLECTORS
DESCRIPTION • one-box shaped dust collector for local or central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 5 100 - 8 240 m3/h• filter area 118 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6-8 Nm3/h• pressure loss 1500 Pa
DESIGN• 1x filter box made of carbon steel• damping chamber to reduce the noise from the fan• filter element: 24x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 1500 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (4 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h) Fan (kW)
Fan underpressure
(Pa)
Filter surface load
(m3/m2/min)
5 100 11,0 4 100 0,725 100-6 000 11,0 4 000 0,856 000-6 720 15,0 4 300 0,956 720-8 240 15,0 4 150 1,16
Dust collector M1500-1-24 is a one box-shaped device. It is used for local or central filtration in various industrial areas with non-stop operation. It is equipped with the built-in fan and dust hopper with support construction.
800
2 297
5 488
1 500
2 970
1 358
2 970
370
250
335
112
�18
2 297
780 530
1 942
4 647
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.2. TYPE M1500-1-24
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.3. TYPE M2000-1-18
DUST COLLECTORS
DESCRIPTION • one-box shaped dust collector for local or central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 6 000 - 8 400 m3/h• filter area 118 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6-8 Nm3/h• pressure loss 1500 Pa
DESIGN• 1x filter box made of carbon steel• damping chamber to reduce the noise from the fan• filter element: 18x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve(3 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicatethe filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h)
Fan (kW)
Fan underpressure (Pa)
Filter surface load (m3/m2/min)
6 000-7 500 11,0 4000-3750 0,85-1,067 500-8 400 15,0 4250-4150 1,06-1,197 500-8 400 18,5 4950-4900 1,06-1,19
Dust collector M1500-1-18 is a one box-shaped device. It is used for local or central filtration in various industrial areas with non-stop operation. It is equipped with the built-in fan and dust hopper with support construction.
A A
1386
1031
4236
5076
O31
5O
355O 10
309
O O35
5O
386
O 10
413
1421
,519
29
2083,5
1256
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.3. TYPE M2000-1-18
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.4. TYPE M2000-1-24
DUST COLLECTORS
DESCRIPTION • one-box shaped dust collector for local or central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 6 000 - 12 000 m3/h• filter area 158 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 6-8 Nm3/h• pressure loss 1500 Pa
DESIGN• 1x filter box made of carbon steel• damping chamber to reduce the noise from the fan• filter element: 24x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve(4 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicatethe filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h)
Fan (kW)
Fan underpressure (Pa)
Filter surface load (m3/m2/min)
6 000-7 500 11,0 4 000-3 750 0,63-0,797 500-9 600 15,0 4 250-3 950 0,79-1,017 500-12 000 18,5 4 950-4 350 0,79-1,26
Dust collector M1500-1-24 is a one box-shaped device. It is used for local or central filtration in various industrial areas with non-stop operation. It is equipped with the built-in fan and dust hopper with support construction.
A A
1386
1031
4236
5076
O31
5O
355O 10
309
O O35
5O
386
O 10
413
1421
,519
29
2083,5
1256
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.4. TYPE M1500-1-24
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.5. TYPE M2000-2-36
Dust collector M2000-2-36 is a two box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • two-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 10 000 - 15 500 m3/h• filter area 236 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 8-10 Nm3/h• pressure loss 1500 Pa
DESIGN• 2x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 36x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (6 pcs), safety valve (2 pcs), pressure
regulator (2 pcs)• pressure air connection: internal thread G ½“• 2x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h) Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/min)
10 000 15,0 3 700 0,7110 000-12 500 18,5 4 100 0,8812 500-15 500 22,0 4 000 1,10
5 506
2 456
1 897
2 862
2 644
5 506
2 456
1320
1080 102562
1 000
1 000
166
1 366
800
1 200
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.5. TYPE M2000-2-36
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.6. TYPE M2000-1-24
DUST COLLECTORS
DESCRIPTION • one-box shaped dust collector for local or central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 16 600 m3/h• filter area 158 m2
• fan 37 kW• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 8-12 Nm3/h• pressure loss 2000 Pa
DESIGN• 1x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 24x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (4 pcs), safety valve (1 pc), pressure
regulator (1 pc)• pressure air connection: internal thread G ½“• pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• dust collection box• piping to the fan included
ADDITIONAL ACCESSORIES• service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Dust collector M2000-1-24 is a one box-shaped device. It is used for local or central filtration in various industrial areas with non-stop operation. It is equipped with the standalone 37 kW fan, hopper with support construction and dust collection box.
A A
1386
413
1700
1200
1560
1060
Ø22
140
140
1421
,519
29
2089,312
56
1700
702
Ø25
1750
852
150
150
1500
2632
,5
3030
506O
1057
780
B
B Ø63
0Ø
690
Ø72
5
Ø12
30°
1961
805
2825
3241
4073
,5
1061
1105
CC
Ø50
0Ø
560
Ø59
5
Ø12
30°
812
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
3. INDUSTRIAL FILTRATION (M-SERIES) 3.6. TYPE M2000-1-24
DUST COLLECTORS
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.7. TYPE M2000-2-48
Dust collector M2000-2-48 is a two box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • two-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 13 500 - 21 000 m3/h• filter area 316 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 8-10 Nm3/h• pressure loss 1500 Pa
DESIGN• 2x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 48x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (8 pcs), safety valve (2 pcs), pressure
regulator (2 pcs)• pressure air connection: internal thread G ½“• 2x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h) Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/min)
13 500 18,5 3 900 0,7113 500-17 000 30,0 4 600 0,9017 000-21 000 37,0 4 600 1,10
5 506
2 456
1 897
2 862
2 644
5 506
2 456
1320
1080 102562
1 000
1 000
166
1 366
800
1 200
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.7. TYPE M2000-2-48
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.8. TYPE M2000-3-54
Dust collector M2000-3-54 is a three box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • three-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 15 000 - 23 500 m3/h• filter area 354 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 10-12 Nm3/h• pressure loss 1500 Pa
DESIGN• 3x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 54x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (9 pcs), safety valve (3 pcs), pressure
regulator (3 pcs)• pressure air connection: internal thread G ½“• 3x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h)
Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/min)
15 000 22,0 3 900 0,7115 000-20 000 30,0 3 700 0,9420 000-23 500 37,0 4 000 1,10
5 506
3 656
1 897
2 862
2 644
5 506
3 656
1320
1080 102562
1 000
1 000
166
1 366
800
1 200
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.8. TYPE M2000-3-54
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.9. TYPE M2000-3-72
Dust collector M2000-3-72 is a three box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • three-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 20 000 - 31 500 m3/h• filter area 474 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 10-12 Nm3/h• pressure loss 1500 Pa
DESIGN• 3x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 72x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (12 pcs), safety valve (3 pcs), pressure
regulator (3 pcs)• pressure air connection: internal thread G ½“• 3x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h) Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/
min)
20 000 37,0 4 500 0,7020 000-26 000 45,0 4 500 0,9126 000-31 500 55,0 4 600 1,10
5 506
3 656
1 897
2 862
2 644
5 506
3 656
1320
1080 102562
1 000
1 000
166
1 366
800
1 200
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.9. TYPE M2000-3-72
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.10. TYPE M2000-4-72
Dust collector M2000-4-72 is a four box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • four-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 20 000 - 31 500 m3/h• filter area 474 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 14-16 Nm3/h• pressure loss 1500 Pa
DESIGN• 4x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 72x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (12 pcs), safety valve (4 pcs), pressure
regulator (4 pcs)• pressure air connection: internal thread G ½“• 4x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h)
Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/min)
20 000 37,0 4 500 0,7120 000-26 000 45,0 4 500 0,9126 000-31 500 55,0 4 600 1,10
2680
.00
1135
.00
1183
.00
300.
00
700.00 1400.00 1400.00 1400.00 705.00 2400.00
2267
.00
A A
963.
00
310.00
1183
.00
B
1400.00 1400.00 1400.00
2375
.00
510.
00O
487
450.
00
12x 27.50
607.00
815.
00
87.5
04x
160=
640.
00
143.502x160= 320.00
20.00
20.0
0
24.00
9023.00
3014.24C
5355
.00
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.10. TYPE M2000-4-72
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.11. TYPE M2000-4-96
Dust collector M2000-4-96 is a four box-shaped device. It is used for central filtration in various industrial areas with non-stop operation. It is equipped with the standalone fan and dust hoppers with support construction.
DESCRIPTION • four-box shaped dust collector for central filtration• suitable for various industrial areas with non-stop operation
(energy, building industry, foundries, welding, chemical and food industry etc.)
OPERATION QUALITIES• flow rate 27 000 - 42 000 m3/h• filter area 632 m2
• residual dust concentration at the output <10 mg/m3
• temperature resistance -20 °C / +80 °C• compressed air needed 6 bar, consumption 14-16 Nm3/h• pressure loss 1500 Pa
DESIGN• 4x filter box made of carbon steel• standalone fan with vibration joints and dampers• filter element: 96x filter cartridge
made of polyester in basic designdiameter 156 mm, lenght 2000 mm
• air tank with JET-PULS filter cartridges recovery and timer• electromagnetic valve (16 pcs), safety valve (4 pcs), pressure
regulator (4 pcs)• pressure air connection: internal thread G ½“• 4x pressure switch to indicate the filter cartridges are plugged • electric control box: 3 x 400 VAC, 50 Hz• dust hopper with support construction• piping to the fan included
ADDITIONAL ACCESSORIES• rotary feeder or dust collection box • service platform for easy maintenance• ATEX, food or chemical industry design• non-standard temperature design -40 °C / +150 °C
Flow rate (m3/h) Fan (kW)
Fan underpressure
(Pa)
Filter surface load (m3/m2/
min)
27 000 45,0 4 200 0,7027 000-34 000 55,0 3 600 0,9034 000-42 000 75,0 3 600 1,10
2680
.00
1135
.00
1183
.00
300.
00
700.00 1400.00 1400.00 1400.00 705.00 2400.00
2267
.00
A A
963.
00
310.00
1183
.00
B
1400.00 1400.00 1400.00
2375
.00
510.
00O
487
450.
00
12x 27.50
607.00
815.
00
87.5
04x
160=
640.
00
143.502x160= 320.00
20.00
20.0
0
24.00
9023.00
3014.24C
5355
.00
DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]
DIVISION
DUST COLLECTORS
3. INDUSTRIAL FILTRATION (M-SERIES) 3.11. TYPE M2000-4-96