PROOF PROOF

COMPONENTS FOR ELEVATORS

Stand-alone unit consisting of dual action latchable push button, enclosed with breakable glass front.

Equipped with a small metallic hammer to break open the front glass

FIREMAN SWITCH

Contact box assembly housed in a Dust proof / Flame proof enclosure.

The arm with the rubber roller assembly is outside the enclosure

LIMIT SWITCH

Dust Proof and Flame Proof Elevator Components are invaluable for saving elevators installed in dusty environments such as

Cement plants, Thermal power plants, Steel plants, Mining enterprises etc.

Certified by CMRI. Flameproof as per IS/IEC 60079-1: 2007 & Weatherproof as per IS/IEC 60529 : 2001

EMERGENCY HOOTER

Stand-alone unit

Equipped with a regulated Battery Charging and Discharging Circuit

Duration of emergency operation – 90 minutes

EMERGENCY LIGHT

Equipped with a housing of Aluminium Alloy Casting with Horn made from sheet metal

Sound level120 dB

Stand-alone unit with Pulse / Tone arrangement suitable for 48 V DC telephone network

Equipped with:

Metallic dial keypad with redial facility and flash Buzzer with sound level 80 dB

LED for indicating incoming calls on the outside and electronic PCB inside

TELEPHONE CABIN LIGHT

Equipped with heat-resistant clear toughened glass and mirror optic reflector

JUNCTION BOX

Cast aluminum alloy enclosure with epoxy powder coating

Equipped with electrical terminals

RCBO

Residual Current Breaker with Overload protection, RCBO

RCBO consists of 3 phase ELMCB and single phase ELMCB enclosed in a DP sheet metal box

PROOF

COMPONENTS FOR ELEVATORS