neworleans.dykedoors.com dyke industries, inc. · woodfold accordion doors 7. doors - leaded glass....

504-733-8500 800-229-3953email: [email protected]:// NewOrleans.DykeDoors.com

Dyke Industries, Inc.Building Materials and Millwork since 1866

301 Evans RoadNew Orleans, LA 70123

LIST PRICE CATALOG

On the left side of your Acrobat® Reader, you should see a “Bookmarks” tab. Clicking on it will reveal the chapters of the catalog. Clicking on the “+” next to each chapter will expand that chapter and bring up a list of the pages within that chapter. Click on a page

link to jump to that page.

You can also navigate using the “Pages” tab and scrolling through thumbnails of the pages.

Note: This catalog represents products and pricing for Dyke Industries, Inc. - NEW ORLEANS Location only.

For mre product information please visit our website at:NewOrleans.DykeDoors

F.O.B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice.

of 306 9/28/20

v.9.28.20.1

mailto:[email protected]

https://NewOrleans.DykeDoors.com

https://neworleans.dykedoors.com



September 2020

Dyke Industries, Inc.

For mre product information please visit our website at:NewOrleans.DykeDoors

Note: This catalog represents products and pricing for Dyke Industries, Inc. - NEW ORLEANS Location only.

504-733-8500 800-229-3953 fax 504-733-1848email [email protected]

Building Materials and Millwork since 1866New Orleans, LA 70123

LIST PRICE CATALOGBuilding Materials and Millwork since 1866

website https:// NewOrleans.DykeDoors.com


of 306 9/28/20







https://neworleans.dykedoors.com


September 2020

Section Contents

1 Introduction

3 Aluminum & Vinyl Windows4 Interior Doors and Door Units

4-A Interior Bifold & Pocket Units4-B Exterior Door Frames4-C Exterior Fiberglass & Steel Units5 Exterior Fir and Mahogany doors6 Vinyl Shutters7 Room Divider / Accordion Doors

10 Sills & Door Weatherstripping11 Mouldings12 Stair Parts, Attic Stairs, Columns13 Door Locks

18 Barn door Hardware, Misc Door Hardware19 Skylights


of 306 9/28/20





September 2020

Catalog Index DESCRIPTION Section

Aluminum Sills 10Aluminum Windows 3Attic Stairs 12Barn Door Hardware 18Bifold Doors & Units Interior 4-ABlinds Exterior Decorative Vinyl 6Block Windows Glass and Acrylic 2Cased Openings Interior 4-ACasing and Trim Exterior - Corner & Plinth Blocks 4-ACasing and Trim Interior - Corner & Plinth Blocks 4Casing and Trim Lineal Moulding and Casing Sets 11Closet Rods Adjustable Aluminum 18Columns Fiberglass & Wood 12Decorative Windows 2Door Unit Frames Exterior - Fir, Mahogany, Primed, Composite 4-BDoor Units - Exterior Steel and Fiberglass 4-CDoor Units - Interior Bifold, Bypass, & Pocket 4-ADoor Units - Interior - Single and Double 4Doors - Bifold, Carton Packs and Units 4-ADoors - Interior 4Doors - Exterior Wood - Fir, Mahogany 5Doors - Woodfold Accordion Doors 7Doors - Leaded Glass 5Exterior Door Units Steel and Fiberglass 4-CExterior Door Units Wood 4-B & 5Fiberglass Columns 12Fiberglass Door Units 4-CFire Rated 20 Minute Rated Frames and Doors 4-A&CHardware Bifold, Bypass, & Pocket 4-AHardware Hinges, Stops, etc. 18Hardware Door Locks 13


of 306 9/28/20






September 2020

Catalog Index DESCRIPTION Section

Leaded Glass Doors Wood 5Locksets 13Mahogany Doors 5Mouldings Solid Fir, Primed, MDF 11Patio Door Units Fiberglass 4-CPocket Door Frames Interior 4-AScreen Doors Wood 6Shutters Decorative Vinyl 6Sills Aluminum 10Sill Pans 10Skylights 19Stair Parts 12Steel Door Units 4-CSteel Door Frames Adjustable Steel Frames 4-CThresholds Aluminum Sills 10Transoms Interior Transom Frames 4-ATransoms Exterior 4-B&CWeatherstrip Q-Lon 10Windows - Aluminum 3Windows - Vinyl 3Windows - Decorative 2Wood Columns 12Wood Exterior Door Unit Frames 4-B


of 306 9/28/20



September 2020


of 306 9/28/20


504-733-8500800-229-3953Fax 504-733-1848email: [email protected]

August 2019

Catalog Index

DESCRIPTION Section

Fire Rated 20 Minute Rated Frames and Doors 4-A&C

Hardware Bifold, Bypass, & Pocket 4-A

Hardware Hinges, Stops, etc. 18

Hardware Door Locks 13

Leaded Glass Doors Wood 5

Locksets 13

Louver Inserts For Wood Doors 5

Louvers Gable-End 19

Mahogany Doors 5

Mantles MANTLECRAFT 19

Mouldings Solid Fir, Primed, MDF 11

Patio Door Units Fiberglass 4-C

Pocket Door Frames Interior 4-A

Porch & Deck Rail Vinyl QuickRail 12

Screen Doors Wood 6

Shutters Decorative Vinyl 6

Sills Aluminum 10

Sill Pans 10

Skylights 19

Stair Parts 12

Steel Door Units 4-C

Steel Door Frames Adjustable Steel Frames 4-C

Thresholds Aluminum Sills 10

Transoms Interior Transom Frames 4-A

Transoms Exterior 4-B&C


of 306 9/28/20


504-733-8500800-229-3953Fax 504-733-1848email: [email protected]

August 2019

Catalog Index

DESCRIPTION Section

Weatherstrip Q-Lon 10

Windows - Aluminum 3

Windows - Vinyl 3

Windows - Decorative 2

Wood Columns 12

Wood Exterior Door Unit Frames 4-B


of 306 9/28/20


504-733-8500 - 800-229-3953Fax [email protected]

INFORMATION Page 1Effective: January, 2018

Cancels: All Previous

General Information

TERMS AND CONDITIONS OF SALE

SALES POLICY

TERMS AND CONDITIONS OF SALES

Prices - All prices in this book are a LISTING PRICE.

LOSS AND DAMAGE CLAIMS

Our company is appreciative of your interest in doing business with us, and we continually strive to service you in such a way that we can add to the efficiency and profitability of your business. The following policies and guidelines have developed over many years so that we can become a better supplier to you, and we ask that you read this information carefully to avoid any misunderstandings and strengthen our partnership in the building industry. The future of our Company and our many employees is dependent on the continued success of you, our customer. We feel it is one of our primary responsibilities to keep you properly informed and to enable you to better serve your customers.

Management reserves the right to sell only to those individuals or concerns deemed credit-worthy and who meet the parameters of our marketing program. Possession of our catalog by any person or firm in no way represents any implied contract of offer to sell any of the merchandise listed herein.

Term Discounts - Our cash discount is 1% 10th of the following month; net the 15th. Direct shipment terms are 1% five days after arrival of the merchandise. Amounts past due are subject to a service charge of 1/1/2% per month unless applicable laws require a lesser charge. Federal law dictates that all customers are subject to the same discount and service charge policy.

We work very hard to ensure that all your merchandise is delivered to you in good condition. We ask you to carefully inspect all shipments for accuracy and for any possible damage. In the event of damage, please refuse the merchandise at the time of delivery and it will promptly be re-shipped. In the event of minor damage that is questionable and may warrant keeping subject to your customer's inspection, please note this clearly on the shipping document. Any damage or loss on a shipment made by common carrier will have to be handled by a freight claim with the carrier or shipper. This is your responsibility and needs to be handled promptly, and our office will be glad to assist you in any way possible.

F.O.B. New Orleans or Delivered our TruckPrices Subject To Change Without Notice

of 306 9/28/20





General Information

SHORTAGES AND ERRORS

HOW TO ORDER

Orders can be sent by fax - 504-733-1848 - , or email - [email protected]

SPECIAL ORDERS

Orders for special order material and millwork fabricated for you are not returnable and may not be cancelled after the order is placed.

Written orders are always preferable to verbal orders as they reduce mistakes. Door Unit Order Forms, as shown at the back of this section, are available from your sales representative, or by calling our office. These forms are formatted to help get all the needed information for door unit production, in a logical order. In many cases this will help expedite your order.

Shortages of materials and errors in entering or shipping orders should be reported to us immediately. Delay and expense can often be avoided by prompt and careful check of order acknowledgment. All material should be inspected immediately upon delivery, and all claims for defective material should be filed before installing or finishing.

Chance of delay and confusion can be minimized by giving full and complete information when ordering. Always give: (1) Quantity; (2) Item (door, window, etc.); (3) Size (Width first, Height second, Thickness third); (4) Number of lights; (5) Designname or number; (6) K.D. or set up; (7) Specie of wood; (8) Any other helpfulinformation.

As architecture continues to change, windows and doors have become much more complex to such an extent that virtually every home being built requires products that are non-stock and must be SPECIAL-BUILT AND SPECIAL ORDERED. Because of the extended lead times in these products, along with the fact that they are non-returnable, it is essential that any mistakes or changes be caught before manufacture. For this reason, we ask that all special orders be faxed or mailed to us as confirmations before being ordered. We will promptly enter your orders upon receiving your signed confirmation. This will ensure that we can accurately order what is needed the first time, rather than trying to solve a problem months after it was ordered.


of 306 9/28/20






General Information

RETURNED GOODS

PRICE CHANGES

Prices are F.O.B. our warehouse or delivered our trucks.

Special Order Items and Manufactured Items (door units, window units, etc.) or, products that have been stained, painted,damaged, or altered in any way may not be returned.

Do not return any material without first obtaining authorization. Our field sales representatives will assist you in handling returns. Office personnel are not authorized to sign pick-ups, nor are our drivers allowed to pick up merchandise without an authorized pick-up. Request for pick up should include original order number or invoice number. No credit will be given for material returned without prior authorization. Following these procedures carefully will allow us to issue credit in an accurate and timely manner.

Market conditions are uncertain and it is not possible for us to guarantee the prices published herein. All prices, therefore, are subject to change without notice.

Any stock merchandise, in the original unopened carton, that is in salable condition may be returned within thirty (30) days of receipt, will be credited at invoice price, subject to a restocking charge. Return freight, UNLESS PREPAID, will be deducted. If the return is due to our error, no charge for freight or handling will be made.


of 306 9/28/20





General Information

WARRANTY STATEMENT

1. NOTIFY YOUR SALESPERSON IMMEDIATELY. HE OR SHE WILL INSPECTTHE PRODUCT AND MAKE A WRITTEN REPORT ON YOUR BEHALF TO US. ANY DELAY IN REPORTING A PROBLEM MAY VOID THE WARRANTY.

When a jobsite inspection is needed it is imperative that a representative of your company accompany our representative, and/or the manufacture's representive for the inspection. This will help to insure that all parties understand what was observed and agreed upon.

ALL PRODUCTS IN THIS CATALOG ARE WARRANTED BY THE VARIOUS MANUFACTURERS WE BUY FROM. WITHOUT EXCEPTION, ALL ARE VERY SPECIFIC ABOUT HOW THEIR PRODUCTS ARE STORED, PAINTED, INSTALLED AND MAINTAINED, AND HOW LONG THE PRODUCT HAS BEEN IN USE. WITHOUT EXCEPTION, ALL WARRANT THE PRODUCT ONLY. NO INSTALLATION OR FINISHING COST ARE INCLUDED. WE DO NOT ACCEPT ANY RESPONSIBILITY BEYOND THE WARRANTY OF OUR SUPPLIERS. We find the most common reasons for complaints are installation problems with square, level, plumb and shimming; and the painting and finishing of the product.

2. WE WILL SUBMIT THE CLAIM IN WRITING TO THE MANUFACTURER WHOWILL EVALUATE THE CLAIM AND MAY AUTHORIZE US TO ACT IN THEIR BEHALF. SOMETIMES THE MANUFACTURER REQUIRES THEIR REPRESENTATIVE TO ALSO INSPECT THE PRODUCT.

THE MANUFACTURER AND DYKE INDUSTRIES ARE NOT LIABLE FOR ANY PRODUCT REPAIRED OR REPLACED WITHOUT PRIOR CONSENT.

Please see each manufacturer's warranty information for specific details. Copies are included in our price catalog or, are available from your sales representative.

We hope this information will be helpful to you and your customers.

IF YOU EVER EXPERIENCE A CLAIM, THEN THE FOLLOWING PROCEDURE WILL HELP YOU AND YOUR CUSTOMER:


of 306 9/28/20





General Information

SYNTHETIC STUCCO

What Causes Rot ?

Over the past several years, numerous problems have surfaced concerning rot and deterioration of wood millwork when used in conjunction with synthetic stucco applications. This problem is serious enough that several states and counties have placed moratoriums on the use of this product, and there are several class action lawsuits against the synthetic stucco manufacturers now in litigation. As a result of this, many of the label window manufacturers will no longer warrant their product when used in this application. We have taken the position that until this application has been improved and stands a longer test of time, we cannot recommend our wood door and window units be used with synthetic stucco. We will not be able to warrant these products. We strongly encourage our customers to consider the new synthetic products that are now on the market, along with new products being developed, such as vinyl, fiberglass and other composite materials.

Dyke Industries, as do most millwork suppliers, use quality products in the manufacture of our door and window units. However nothing that we do can prevent wood from rotting if the proper installation, finishing, and care for these products is not enlisted by the builder and consumer.

Wood rot is caused by fungi that require air, warmth, and moisture for growth. Wood that is kept dry will not rot. Wood that is allowed to stay wet will probably decay.

All wood components that we use in an exterior unit are treated with wood preservatives. Because of government regulations regarding environmental concerns the removal of many of the protective agents has caused these preservatives to be less effective. Paints have also had many of their protective agents removed for these same reasons. This is why it is very important to finish these products with the recommended procedures and periodically check to assure that the finish is maintained.

We do offer upgraded products that are rot resistant and/or made with composite materials.


of 306 9/28/20





General Information

INSTALLATION INSTRUCTIONS

Exterior Door Units -

Place unit in opening and temporarily tack unit in place on the hinge side only. Plumb the hinge jamb in both directions. Place shims behind each hinge. Using finish nails (or screws) secure hinge jamb at each hinge through the shims being careful to check that the jamb stays plumb and that the reveal between door and jamb is uniform the entire length. Do not drive nails and screws in completely at this time.

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions.

The manufacturers installation and finishing instructions must be followed to comply with their specific warrantees. To insure that door and window units operate and function as designed, proper installation is critical. Basic installation instructions are as follows (See manufacturer's instructions for their specific recommendations) :

Check rough opening for proper size (approximately 1/2" greater than unit width and height at outside of jamb), plum, square and level. On exterior units two or three large beads of caulk should be placed under where the sill is positioned, the entire length of the opening. A sill pan and/or sill gasket is highly reccomended.

ALL PRODUCTS, INTERIOR OR EXTERIOR, CONTAINING WOOD MUST BE PROTECTED FROM WATER, MOISTURE, AND HUMIDITY, AND SHOULD BE FINISHED, IMMEDIATELY

AFTER DELIVERY.

Keeping door in the closed position, adjust the strike jamb with shims to maintain the same margin between door and jamb at top and lock side. Also adjust so that the door is making even contact with stop (or weatherstrip). Secure this jamb with finish nails or screws through the shims at the top, bottom and behind the strike.

Open the door to make sure that it functions properly. Close door again and check to see that the reveal between the door and frame is even at the top and both sides and that contact with stop or weatherstrip and the door is maintained. Adjust if needed. Set nails (or screws). We recommend on all exterior doors that at least one screw in each hinge be replaced with a 2-1/2" long screw through the jamb and into the framing stud to prevent sag caused by the weight of the door.

Apply caulk around the perimeter of the frame; around all outside casing; where the sill meets the jamb; and at the front of the sill where it meets the floor. All wood components should be finished as soon as possible. See manufacturer's specific recommendations on finishing. (A prime coat is not a finish and does not offer protection from the elements). All six sides (both faces, as well as, top and bottom and both edges)of a door must be finish painted.


of 306 9/28/20





General Information


Window Units -

Interior Door Units -

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions.

Check rough opening for proper size (approximately 1/2" greater than window unit width and height at outside of jamb), plum, square and level. Set unit in rough opening, square, level, and plumb. Shim between side jambs, head and sill, and recheck for squareness and plumb. Re-check unit before final installation is complete. Installer is responsible for caulking and flashing around entire perimeter of unit at joint of frame and siding, and the caulking of joints at sills before painting.

Check rough opening for proper size (approximately 1/2" greater than door unit width and height at outside of jamb), plum, square and level.

Place unit in opening and temporarily tack unit in place on the hinge side only. Plumb the hinge jamb in both directions. Place shims behind each hinge. Using finish nails secure hinge jamb at each hinge through the shims being careful to check that the jamb stays plumb. Do not drive nails in completely at this time.

Keeping door in the closed position, adjust the strike jamb with shims to maintain the same margin between door and jamb at top and lock side. Also adjust so that the door is making even contact with stop. Secure this jamb with finish nails through the shims at the top, bottom and behind the strike.

Open the door to make sure that it functions properly. Close door again and check to see that the reveal between the door and frame is even at the top and both sides. Adjust if needed. Set nails. We recommend on some of the heavier interior doors, that at least one screw in each hinge be replaced with a 2-1/2" long screw through the jamb and into the framing stud to prevent sag caused by the weight of the door.

See manufacturer's specific recommendations on finishing. All interior door units must be finished on all six sides ( both faces, edges, and top and bottom).


of 306 9/28/20





General Information


FINISHING INSTRUCTIONS Exterior Products

These are basic instructions to follow for our door and window units:

General Information. Please see specific manufacturer's installation instructions for their recommended installation instructions

7. "Bridge" the paint at all joints between mouldings and other surfaces of doors toensure that there are no gaps.

8. Since all wood will move with seasonal weather changes, we recommend thatall wood windows and doors be inspected every six months. The paint finish andthe seal between all surfaces should be checked to insure that they are notbroken.

3. Windows and doors should be painted immediately after installation to avoiddamage.

4. Excess caulking (squeeze out) between glass and wood should be removed prior topainting.

5. Apply oil-based prime coat and two or three coats of finish paint to all surfaces.(Jambs and trim should be back primed before installation.) Doors must be primedand finished painted on ALL SIX SURFACES (both faces, two side edges, top andbottom). If door has a bottom sweep, remove it, properly finish bottom of door, then re-install sweep.

6. On windows, and doors with glass, the paint, and/or silicone caulking, must lap or"bridge" onto the glass 1/16" to ensure proper seal. Do not break this seal whencleaning excess paint from the glass. If seal is broken water will get to the woodand lead to deterioration.

Wood is one of the most versatile and beautiful products used in the manufacture of exterior windows and doors. We use engineered products from reputable manufacturers designed to give many years of trouble free use. However proper finishing immediately at installation and continued maintenance is needed for a lifetime of satisfaction.

Each manufacturer has specific recommendations on the painting and finishing of their products. Failure to follow these instructions could void the manufacturer's warranty.

1. Fill all nail holes and caulk all joints. Caulk the perimeter of unit between trim andsiding material.

2. Clean and sand with fine sandpaper before finishing. Surface must be clean anddry. Materials should be allowed to "dry out" after damp weather. Do not finish in dampweather.


of 306 9/28/20


Fax Page ____of _____ JOB ORDER -

(Total pages in this fax) PAGE ______

OF ________

DATE (Number of pages for this job)

Requested date

fax contact phone #

JOB NAME Ship Via ___Delivery ___ Will call

city/state zip

_____WOOD UNITS OR ____STEEL ____SMOOTH FBRGLS ____TXTURD FBRGLS

_____SINGLE UNITS _____DBL UNITS _____ W/SIDELITES _____W/TRANSOM

JAMB JB WIDTH SILL O/S CASING OPEN HINGE COLOR

____FRAMESAVER w/strip** ___4-5/8" * ___MILL FXD ____WM180 ___OPEN IN __DULL BRS - 2D

____PF WHT PRMD COMP* w/strip ___5-1/4" * ___MILL ADJ ____NO CASING ___OPEN OUT __BRT BRASS - 3

____PRMD w/strip ___5-1/2" ___BRZ FIXED ____PF COMP 180 ___FIXED __SAT NICKL -15

____CLR FIR w/ w/strip ___6-9/16" * ___BRZ ADJ ____5/4 X 4 FIR ___Various - __SAT CHRM -26D

____MAHOGANY w/ w/strip ___8-7/8" ** ___BRSS ADJ ____5/4 X 4 PRMD BORE __DRK BRZ - 10B

____Clr FIR - No W/Strip ___ Various ___MILL ADA ____1X4 ____SINGLE __PRIMED

____PRIMED- No W/Strip Other ______ ___Opn Out Bmper ___1X4 w/180 ____DOUBLE __OTHER __

___Various - ___OTHER______________ ____NO BORE

___Various -

** FrameSaver = primed with composite bottom frame and WM180 . * PF WHT COMP = Primed all composite frame and WM180For various jambs, sills, casing, NOTES:etc., mark "VARIOUS" aboveand specify in DESCRIPTION.

QUAN. SWING SIZE DESCRIPTION

Please copy as needed. 2/18/13

phone: ordered by:

EXTERIOR UNITS

PRICE

Dyke Industries, Inc

fax: 504-733-1848

email: [email protected]

CUSTOMER P O #

of 306 9/28/20


blank

of 306 9/28/20

Fax Page ____of _____ JOB ORDER -

(Total pages in this fax) PAGE ______

OF ________

DATE (Number of pages for this job)

Requested date

fax contact phone #

JOB NAME Ship Via ___Delivery ___ Will call

city/state zip

Type of Unit OR OR

_____SINGLE UNITS _____DBL UNITS _____ CASED OPENINGS & _____BIFOLDS

JB WIDTH JAMB CASING BORE HINGE COLOR

_____PRIMED flat ____SINGLE ____DULL BRS - 2D

_____4-7/8" _____CLR FIR flat ____DOUBLE ____SAT NICKL -15

_____5-1/4" _____PRIMED split adj. ____NO BORE ____SAT CHRM -26D

_____5-1/2" _____CLR FIR split adj. ____BALL CATCHES ____PRIMED

_____6-9/16" ____BRT BRASS - 3

_____7-1/4" ____ANT NICKL -15A

_____FJ 2-1/4" WM356 ____DRK BRZ - 10B

____OTHER

______________

_____NO CASING

_____4-5/8"

_____CLR FIR 2-1/4" WM324

_____CLR FIR 3-1/4" C-11

_____Various

List Widths in

Description

_____PRMD 2-1/4" WM 324

_____PRMD 3-1/4" C-11

_____PRMD 3-1/4" C24

_____PRMD 4-1/4" C12

_____CLR FIR 2-1/4" WM356

Dyke Industries, Inc

fax: 504-733-1848

email: [email protected]

phone:

P O #

ordered by:

INTERIOR UNITS

CUSTOMER

_____PRMD 3-1/2" RB-3

_____PRMD 2-1/4" WM356

_____NO CASING

QUAN. SWING SIZE DESCRIPTION


NOTES:

PRICE


of 306 9/28/20


blank

of 306 9/28/20

504-733-8500 [email protected]:// NewOrleans.DykeDoors.com

Section 2 Page 1Effective: August 2019

DecoGlassGlassCraft Decorative Bath and Spa Windows

Image Series

NUMBER DESCRIPTION SIZE LIST PRICE PRODUCT CODE

XCD 4848 R Canterbury 49-5/8" x 49-5/8"

XAD 4848 R Amhurst 49-5/8" x 49-5/8"

XMD 4848 R Manchester 49-5/8" x 49-5/8"Rough opening = 50" x 50"

These are just a few of many DecoGlass styles available from GlassCraft Doors.

See their entire collection at www.gcdoor.com/deco.asp

or use the link on our website atwww.dykeind.com/new orleans

SPECIAL ORDER - Please call for a quote.

NON-STOCK

Window Frames are constructed using "Marley" composite, no-rot,material on the exterior and clear wood on the interior side. The exterior features a composite sill nosing and brick moulding.

The Image series is a double glazed window with decorative, obscure , tempered glass (designs shown below) which is permanently secured to another piece of clear tempered safety glass.

The Image Series offers both beauty and value for decorative windows to use in the bath, spa, entryway, stairway, or kitchen

F.O.B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice

of 306 9/28/20




http://www.gcdoor.com/deco.asp

http://www.dykeind.com/new


Section 2 Page 2Effective: August 2019

Acrylic Block Windows

ACRYLIC BLOCK WINDOWS

Tan Aluminum Framed Stock

4242 Crystal View

White Vinyl Framed 1-1/2" x 8" Colonial Block non-stockModel Frame Size Blocks R.O.

FB3434-V 34" x 34" 4 x 4 34-3/4" x 34-3/4"

FB4242-V 42" x 42" 5 x 5 42-3/4" x 42-3/4"

FB5050-V 50" x 50" 6 x 6 50-3/4" x 50-3/4"

White Aluminum Framed 1-1/2" x 8" Clear Wave Blocknon-stock

FB 4242-A 42" x 42" 5 x 5 42-3/4" x 42-3/4"

FB 5050-A 50" x 50" 6 x 6 50-3/4" x 50-3/4"

NON-STOCK

Acrylic Block windows are much more than asubstitute for glass block. The lightweight,economy, and energy efficiency of acrylicblocks have expanded the market for "theglass block look" in residential construction.This durable and attractive block windowsinstalls in minutes just like the other windowson the job.





of 306 9/28/20




504-733-8500 [email protected]

https:// NewOrleans.DykeDoors.com

Section 3 Page 1Effective: May 2019

WINDOWSKrestmark Series 100 White ALUMINUM with LowE

SPECIAL ORDER - Not Stocked


fl Dyke Industries, Inc. New Orleans

Building Materials and Mil/work Since 1866

- LU I U 100

Aluminum 100

The 100 series aluminum window is a single hung window with spiral balance .

. Available as Single Hung, Single Vent

Sliders, Picture Windows and Architectural Shapes. Call out size is actual window size; a 2030 measures 24" x 36"

Features

• Colors: Wh ite , Bronze and Sandstone. (Mill f inish available for Series 100 on ly).

• Alum inum is tremendously strong and stable , it wi ll not swell , shrink, split , crack or check over years of service. It is very durable and can 't rust.

• The Extruded frame w ith integral nailing fin and sash members are commercial quality 6063 T5 Aluminum. Frame corners are mechanically fastened with non-magnetic steel or other non-corrosive materials compatible w ith aluminum such as zinc-plated steel properly

treated for corros ion resistance .

• All 4 frame corners and meeting ra il connections are sealed w ith Polyseamseal to keep the weather out and reduce air infiltration .

• Sash members are interlocked for addit ional strength at corners and locking rai l.

• Two positive sash locks reduce air infiltration. (should remain locked when installing).

• Weatherstripping : The perimeter of the movable sash is w eatherstripped w ith w ool pile

and/or soft vinyl for qu iet, smooth operation to resist weather penetration and reduce air

infiltration against normal elements when the units are closed and locked.

• 5/8" insulated glass with Warm Edge Glass spacer.

• Sloped sill for easy water run off. Corners are sealed w ith Polyseamseal.

• Quality certified in accordance with AAMA specifications.

of 306 9/28/20







WINDOWSKrestmark Series 100 White ALUMINUM with LowE


Divided Light 1/1 Light

New Construction aluminum window. Non-Tilt

Available in Bronze, Sandstone, and Mill ADD 4%

Size Divided Lite List Price Lites List Price

2-0 3-0 D L 179.09 1/1 174.602-0 3-0 OBS D L 195.99 1/1 191.072-0 4-0 D L 212.03 1/1 206.782-0 5-0 D L 244.83 1/1 239.222-0 6-0 D L 273.74 1/1 266.34

2-6 3-0 D L 272.09 1/1 272.092-6 4-0 D L 302.54 1/1 302.542-6 5-0 D L 272.09 1/1 272.092-6 6-0 D L 302.54 1/1 302.542-6 7-0 D L 333.96 1/1 333.96

2-8 3-0 D L 215.99 1/1 208.632-8 4-0 D L 253.94 1/1 245.492-8 5-0 D L 291.92 1/1 282.712-8 6-0 D L 326.34 1/1 314.422-8 7-0 D L 360.56 1/1 345.97

3-0 3-0 D L 233.24 1/1 225.523-0 4-0 D L 273.41 1/1 264.563-0 5-0 D L 313.73 1/1 304.003-0 6-0 D L 349.40 1/1 336.803-0 7-0 D L 387.42 1/1 372.214-0 4-0 D L 322.25 1/1 322.25

NON-STOCKSPECIAL ORDER

Divided Lite w/ half screen 1/1 Lite w/ half screen




// /

/ / /

/

/ / / / /

/ / / / /

1/ // / / ✓

of 306 9/28/20




504-733-8500 800-229-3953 [email protected]:// NewOrleans.DykeDoors.com


WINDOWSKrestmark Series 400 White VINYL with LowE





Vinyl 400 VINYL 400

The Vinyl Series 400 is an energy efficient w indow, used primarily for new construction but shou ld not be ruled out as

remodel or replacement option in certain applications Its contemporary design and clean trim lines are similar to those of

much more expensive wood clad windows and includes integral nai l fin _ With certa in LoE glass and argon glass options,

this window becomes an Energy Star® certified window el igible for a tax credit.

Available as Sing le Hung, Single Vent Slider, Picture Windows and Architectural Shapes. Call out size is ½" larger than

window size; a 2030 actual size is 23 ½" x 35 ½". Not available in custom sizes.

Features

• Colors : W h ite , Pebblestone, and Clay.

• Multi-chambered extruded vinyl frame and sash provides stabil ity w ith excellent strength ,

thermal resistant properties and is extremely low ma intenance. V in yl extrusions have

superior sound absorption and continuous color throughout min imizing unsightly scratches.

• Fu sion w elded corners in frame and sash p rovides strength and v irtually e liminates air and

w ater infiltration.

• Pocket s ill for reduced air infiltration w ith w eep system .

• Integra l pre-punched na il f in adds strength , is a w eather tigh t barr ier and ease of

installation .

• Du al w eatherstrip system reduces a ll w eather a n d air infiltration to meet or exceed national

testing standards.

• Du al pane 5/8" insu lated glass w ith Warm Edge Technology Spacer.

• T ilt-in removable bottom sash for ease of cleaning has dual sash locks on un its 18" and

w ider reducing a ir infiltration , recessed tilt latches, two integral lift ra ils adds strength and for

easy convenient operation .

• Metal reinforced meeting and lock ra il for added strength , positive locking and reduces air

infiltration.

• Block & tackle balances provide smooth operation , locking shoes prevent sash from fall ing

out when tilting for cleaning or removal .

• Combination units are made with continuous head and sill provides added structural

stability and strength during installation.

of 306 9/28/20









Divided Light 1/1 Light

Also available in Clay and Sandstone at no upcharge

Size Divided Lite List Price Lites List Price

2-0 3-0 D L 196.61 1/1 188.032-0 3-0 OBS D L 215.29 1/1 205.852-0 4-0 D L 230.90 1/1 220.182-0 5-0 D L 266.31 1/1 254.502-0 6-0 D L 297.40 1/1 281.33

2-6 3-0 D L 228.95 1/1 213.942-6 4-0 D L 267.76 1/1 250.602-6 5-0 D L 307.40 1/1 287.032-6 6-0 D L 341.72 1/1 317.062-6 7-0 D L 376.04 1/1 344.95

2-8 3-0 D L 238.59 1/1 222.522-8 4-0 D L 277.43 1/1 259.182-8 5-0 D L 318.12 1/1 297.762-8 6-0 D L 354.59 1/1 327.792-8 7-0 D L 389.99 1/1 357.82

3-0 3-0 D L 256.44 1/1 240.373-0 4-0 D L 297.00 1/1 279.023-0 5-0 D L 340.40 1/1 320.033-0 6-0 D L 379.01 1/1 351.123-0 7-0 D L 416.56 1/1 383.304-0 4-0 D L 364.78 1/1 337.99



Produc




// /

/ / /

/

/ /, / / /

/ / / / /

'i / / / /

,

of 306 9/28/20











Vinyl 200/275 The Series 200 New Construction Window is cleanly

designed with a smooth beveled exterior profi le giving

it a nice bold appearance and integral pre-punched

nai l fin. The Series 275 New Construction Window is

designed with a profiled exterior simulating a wood

brickmould look. The 275 also includes an integral

pre-punched nai ling fin . Available as Single Hung,

Picture Window and Arch itectural Shapes. Call out

size is ½" larger than window size; a 2030 is 23 ½" x

35 ½".

Features

•

•

Colors: White , Pebblestone, and Clay .

Multi-chambered extruded vinyl frame

and sash provides stabil ity with

excellent strength, thermal resistant

properties and is extremely low

maintenance. Vinyl extrusions have

superior sound absorption and

continuous color throughout minimizing

unsightly scratches.

• Fusion Welded corners in frame and

sash provides strength and virtua lly

el iminates air and water infi ltration.

• Sil l features a combined sloped and

weep system ensuring quick and easy

water run off.

• Integral pre-punched nail fin adds

strength , is a weather tight barrier and

ease of installation .

YI lQO WTUIIOfl Ill 20ll EXTERIOR

• Dual weatherstrip system reduces all

weather and air infi ltration to meet or

exceed national testing standards.

• Dual pane 5/8" insu lated glass with

Warm Edge Spacers (Spacer type may

vary).

• Tilt-in removable bottom sash for ease

of cleaning has dual sash locks on units

18" and wider reducing air infi ltration ,

recessed tilt latches, integral lift rail

adds strength and for easy operation .

• Metal reinforced meeting rail for added

strength , positive locking and reduces

air infiltration.

• Block & tackle balances provide smooth

operation , locking shoes prevent sash

from fa lling out when tilting for clean ing

or removal.

• Combination units are made w ith

continuous head and si ll provides

added structural stability and strength

during installation .

of 306 9/28/20








New Construction aluminum window. Non-Tilt

For the Series 275 with Tilt Bottom Sash ADD


Size Divided Lite List Price

2-0 3-0 D L 239.29 1/1 234.332-0 3-0 OBS D L 262.14 1/1 256.672-0 4-0 D L 282.66 1/1 276.452-0 5-0 D L 322.37 1/1 314.922-0 6-0 D L 364.56 1/1 354.63

2-6 3-0 D L 280.17 1/1 271.49 2-6 4-0 D L 324.85 1/1 313.68 2-6 5-0 D L 373.18 1/1 360.77 2-6 6-0 D L 420.30 1/1 404.20 2-6 7-0 D L 462.64 1/1 442.67

2-8 3-0 D L 292.58 1/1 282.662-8 4-0 D L 338.50 1/1 327.332-8 5-0 D L 386.83 1/1 374.422-8 6-0 D L 442.67 1/1 425.302-8 7-0 D L 479.90 1/1 458.8103-0 3-0 D L 314.92 1/1 304.993-0 4-0 D L 366.97 1/1 355.803-0 5-0 D L 421.58 1/1 407.923-0 6-0 D L 473.70 1/1 455.083-0 7-0 D L 519.61 1/1 497.284-0 4-0 D L 474.94 1/1 457.56






// /

/ / /

/

/ / / / /

/ / / / /

1/ // / / ,

of 306 9/28/20






WINDOWSKrestmark Series 4000 Vinyl Impact Window -





Features

** Notes special Impact features

• Colors: White , Pebblestone, and Clay_ IMPACT 4000

• * *Multi-chambered extruded vinyl frame and sash w ith strategically placed aluminum reinforcements in the hollows to meet or exceed coastal region structural requirements

provides stabil ity with excellen t strength , thermal resistant properties and is extremely low

maintenance. Vinyl extrusions have superior sou nd absorption and con tinuous color

throughout min im izing unsightly scratches.

• Fusion welded corners in frame and sash provides strength a n d v irtually el iminates a ir and

water inti ltration.

• Pocket s ill for reduced air infiltration with weep system.

• Integral pre-punched na il fin adds strength , is a weather t ight barrier a n d ease o f installation .

• Dual weather strip system reduces all weather and air in fi ltration to meet or exceed national

testing standards.

• Laminated Impact Resistance Glass w ith E nvironsealed W indows™ environmentally

friendly Warm Edge Spacer.

• * *Tilt-in removable reinforced bottom sash for ease of cleaning has dual positive sash

locks with keepers on all units redu cing air infiltration, surface mounted metal tilt

latches attached to lock rail reinforcement, two integral l ift rails adds strength and for

easy conven ient operation .

• * * Metal reinforced meeting a n d lock rail for increased structural integrity, and

reduces air infiltration.

• * *Heavy duty block & tackle balances provide smooth operation , locking shoes prevent

sash from fall ing out when t ilting for cleaning or removal.

• * *Combination un its are made with metal reinforced mull posts provides added

structural stability and strength for coastal requirements.

• Certificat ions o f all products tested are don e to meet or exceed national testing standards

by NFRC and AAMA for Impact-Resistant coastal codes. Energy Star® partner, F lorida

approvals .

of 306 9/28/20






WINDOWSKrestmark Series 4000 Vinyl Impact Window -


Meets Impact Residential Codes.


Size Divided Lite List Price

2-0 3-0 D L 522.06 1/1 514.762-0 3-0 OBS D L na 1/1 na2-0 4-0 D L 800.74 1/1 789.502-0 5-0 D L 972.18 1/1 959.332-0 6-0 D L 1,140.81 1/1 1,124.75

2-6 3-0 D L 776.87 1/1 767.23 2-6 4-0 D L 983.86 1/1 969.40 2-6 5-0 D L 1,187.35 1/1 1,172.89 2-6 6-0 D L 1,397.73 1/1 1,378.46 2-6 7-0 D L 1,767.11 1/1 1,739.81

2-8 3-0 D L 640.21 1/1 621.962-8 4-0 D L 1,038.46 1/1 1,020.802-8 5-0 D L 901.92 1/1 869.072-8 6-0 D L 1,036.97 1/1 1,011.422-8 7-0 D L 1,876.32 1/1 1,849.02

3-0 3-0 D L 692.08 1/1 681.133-0 4-0 D L 839.32 1/1 824.723-0 5-0 D L 986.78 1/1 968.533-0 6-0 D L 1,136.43 1/1 1,110.883-0 7-0 D L 2,074.77 1/1 2,045.864-0 4-0 D L 1,502.30 1/1 1,484.64






// /

/ / /

/

/ / / / /

/ / / / /

'i // / / ,

of 306 9/28/20






WINDOWSKrestmark Series Vinyl and Aluminum Specials


All Krestmark Windows are available in many configurations and combinations, as well as special sizes. Please request a quote on your needs.




C sto Specials s

c.u,, ; ~ inuous m Al'l!.h Tfiml EJ1e

CJOCSIH. eft/T1' I Conlin.JOU$

Cit.art SJ-I

hearal en-HE row

E endedOcia 0 Cctag!l:lf'I

F G.J./!I, st-I; c~ lnucus m An:h SHII

0 Bl..ilSE'feRJII , nd FEB 81-1 : F1111 I E.' brow Singkl letu-i

0 o ...

An::11 uarl

Race1ra,;; ~I

B I

I

I I

of 306 9/28/20






WINDOWS

Intentionally Blank




of 306 9/28/20






WINDOWSAMSCO Renaissance Series


With the Artisan Series, AMSCO has engineered style and design into a functional vinyl window. With deep beveled edges, sturdy frames and a variety of style, it’s the architectural, aesthetically pleasing details you crave, all in low-maintenance vinyl. Combine that with your pick of 6 traditional and contemporary, durable colors, and you’ll find your choices in a vinyl window are now anything but dull.

With the new Renaissance Series composite windows from AMSCO, you can now have the elegant beauty of wood without the upkeep. Read more about how this revolutionary product is changing the window industry and its environmentally friendly attributes here.The Renaissance Series windows come with a lifetime warranty, and a variety of styles and colors. You can also special order a wide variety of specialty shapes.

With the Studio Series, AMSCO combines energy effeciaWith the Studio Series, AMSCO combines energy efficiency, sturdy design and good looks into a budget-friendly vinyl window. With clean lines, large 3-inch frames, and energy-saving CōzE glass standard, these windows are ideal for homeowners who are looking for the perfect mix of performance and style. Choose from a number of options, styles and colors to create the perfect fit.

Meeting higher expectations for appearance, strength, energy efficiency and durability.




Beauty and Elegance without the Maintenance.

Artisan - explore the possibilities

Grids

REJYAISSAJYCE~ Senes

ARTISAN™ Series

Frame Size Large 3-¼" fra me w id th is ideal for new construclion and retro fit a ppl icalions

Custom Sizing Can be custom-ordered to the nearest 1/a inch to f~t any architectural design or custom w mdow

Add a distinct ive touch with 5/a • flat a nd l • sculptured g rid s sealed b;tween the _g lass for ea sy d ea ning o r l beveled simulated divided lite for a more tradi tio na l look

TheStudioSeries by AMSCO Windows8

of 306 9/28/20






WINDOWS

Intentionally Blank




of 306 9/28/20




Section 4 Page 1Effective: Sept. 21, 2020

INTERIOR DOOR UNITS

Major / Minor

1001

1001

10011001100110011001100110011001

NOTE: To determine swing: When the the door opens toward you, and the knob is onthe left, it is a LEFT HAND. When the door opens toward you, and the knob is on the right, it is a RIGHT HAND


of 306 9/28/20





INTERIOR DOOR UNITSSPECIFICATIONS:

Interior Doors 6'8" 8'0"(Does not include 20-minute doors)

Width W Full width (eg. 2-0 = 24" net)Height H 80" 96"

A 6-3/4" 6-3/4"B 37-3/4" 32-3/4"C 68-3/4" 58-3/4"D n/a 84-3/4"

L 44" 60"top of door to center of bore

81" 97"

81-11/16" 97-11/19"83-1/2" 99-1/2"

with 3-1/4" csg 84-1/2" 100-1/2"Net Door Width Plus

1/4"1-5/8"

with 2-1/4" csg 5-1/4"with 3-1/4" csg 7-1/4"

Width Net Door Width Plus 2"Height Net Door Height Plus 2 1/2"

Interior Bore and Hinging Details

CLEAR PRIMEDFIR F-J

One Piece flat jamb with applied stop, 2-1/4" WM 356 or 324 casing. One pair 3-1/2" 2D (brasstone) hinges, standard 2-1/8" lock bore, with 2-3/8" backset.

Hinge mortise Measurements shown are from top of door.

For hinge location on door frame -

ADD 1/8" from inside header.

Top fo door to top of hinge.

Lock Bore

Interior Units 6'8" 8'0"

Inside finished frame Width.Outside Frame Width.

Outside of casing Width.

Suggested Rough Openings

HeightInside finished frame height.** 1/8" spacing between top of door and head jamb, and 7/8" from bottom of door to bottom of jamb.

Outside frame height. (To top of jamb)

Outside of casing height.

Width


of 306 9/28/20





INTERIOR DOOR UNITSSection 4 Door Index

6'8" 2044 4 Pnl Pine6'8" 2066 6 Pnl Pine6'8" N-66 6 Pnl Fir6'8" Flat Panel 3 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel6'8" Flat Panel 5 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel6'8" 2 Pnl Arch CAMDEN Textured Hollow Core Moulded HdBd6'8" 2 Pnl Arch PRINCETON Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Roman Top CAIMAN Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Plank SANTE FE Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Square CARRARA Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Square CARRARA Smooth Solid Core Moulded HdBd6'8" 1 Pnl Shaker MADISON Smooth Hollow Core Moulded HdBd6'8" 2 Pnl Shaker MONROE Smooth Hollow Core Moulded HdBd6'8" 4 Pnl COVENTRY Smooth Hollow Core Moulded HdBd6'8" 5 Pnl ROCKPORT Smooth Hollow Core Moulded HdBd6'8" 5 Pnl ROCKPORT Smooth Solid Core Moulded HdBd6'8" 6 Pnl COLONIST Textured Hollow Core Moulded HdBd6'8" 6 Pnl COLONIST Smooth Hollow Core Moulded HdBd6'8" 6 Pnl COLONIST Smooth Solid Core Moulded HdBd8'0" Flat Panel 3 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel8'0" Flat Panel 5 Pnl SHAKER Primed Wood Stile & Rail w/ MDF Flat Panel8'0" 1 Pnl Shaker MADISON Smooth Hollow Core Moulded HdBd8'0" 2 Pnl Shaker MONROE Smooth Hollow Core Moulded HdBd8'0" 2 Pnl Arch PRINCETON Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CAIMAN Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CARRARA Smooth Hollow Core Moulded HdBd8'0" 2 Pnl RomanTop CARRARA Smooth Hollow Core Moulded HdBd8'0" 4 Pnl COVENTRY Smooth Hollow Core Moulded HdBd8'0" 5 Horizontal Pnl ROCKPORT Smooth Hollow Core Moulded HdBd8'0" 5 Horizontal Pnl ROCKPORT Smooth Solid Core Moulded HdBd8'0" 6 Pnl COLONIST Smooth Hollow Core Moulded HdBd8'0" 6 Pnl COLONIST Smooth Solid Core Moulded HdBd8'0" 2 Pnl Plank SANTE FE Smooth Hollow Core Moulded HdBd6'8" ND-730 Louver / Louver Pine

6'8" & 8'0" 1 Lt Pine 1 Lite Interior French Pine6'8" 1510 / 1515 10 / 15 Lite Interior French FIR6'8" 1510 / 1515 10 / 15 Lite Interior French PRIMED6'8" Pantry 1 Light etched glass with design PRIMED6'8" LAUAN Flush Hollow Core6'8" BIRCH Flush Hollow Core6'8" HARDBOARD Flush Hollow Core

6'8" & 7'0" Barn Door Knotty AlderInterior Options 20 Minute Rated Doors and Units Moulded panel door - cut-down specifications


of 306 9/28/20





INTERIOR DOORS & DOOR UNITS

List Price List PriceDoor Unit Jamb and Trim Adders

Single Unit ADD $20.00 $20.00Double Unit ADD 20.00 20.00Single Unit ADD 32.00 32.00Double Unit ADD 38.00 36.00Single Unit ADD 32.00 20.00Double Unit ADD 36.00 25.00Single Unit ADD n/a 27.00Double Unit ADD n/a 37.00

Hardware Options: Single Unit Double UnitFor Primed Hinges ADD: $2.00 $4.00For Primium Hinges ADD: 4.00 8.00Roller Catches ADD: 15.00 30.00

For more Options see pages 41 - 46 at the end of this sectionDOOR ONLY UNIT UNIT

DESCRIPTION LIST PRICE SIZE LIST PRICE LIST PRICEClear Fir Primed

6'8" 2044 FOUR PANEL Pine

$209 PINE4P68 1-0 x x 6-8 x 1-3/8" $356 $292

1-3 x 223 1-4 x 6-8 x 1-3/8" 370 306245 1-6 x 6-8 x 1-3/8" 392 328269 1-8 x 6-8 x 1-3/8" 416 352269 2-0 x 6-8 x 1-3/8" 416 352278 2-4 x 6-8 x 1-3/8" 425 361283 2-6 x 6-8 x 1-3/8" 430 366289 2-8 x 6-8 x 1-3/8" 436 372306 3-0 x 6-8 x 1-3/8" 453 389

2-0 x 6-8 Double 1-0 $629 $539

2-6 x 6-8 Double 1-3 211 1212-8 x 6-8 Double 1-4 658 5683-0 x 6-8 Double 1-6 700 6103-4 x 6-8 Double 1-8 749 6594-0 x 6-8 Double 2-0 749 6594-8 x 6-8 Double 2-4 766 6765-0 x 6-8 Double 2-6 776 6865-4 x 6-8 Double 2-8 790 7006-0 x 6-8 Double 3-0 823 733

For ALL rip down jambs- other than stock widths

For one piece jambs 4-7/8" or 5-1/4"

3-1/4" C-11 Casing

3-1/2" 1x4 S4S Primed Casing

Door Only Single Units

CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:

One Piece flat jamb with applied stop, 2-1/4" WM 356 casing , 1-1/2 pair 3-1/2" 2D (brasstone) hinges, 2 pair on 8-0

standard 2-1/8" lock bore, 2-3/8" backset. Double Units - No Bore, No Astragal

Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2066R SIX PANEL Pine

$198 PINE6P68 1-0 x x 6-8 x 1-3/8" $345 $281

199 1-3 x 6-8 x 1-3/8" 346 282213 1-4 x 6-8 x 1-3/8" 360 296233 1-6 x 6-8 x 1-3/8" 380 316243 1-8 x 6-8 x 1-3/8" 390 326257 2-0 x 6-8 x 1-3/8" 404 340270 2-4 x 6-8 x 1-3/8" 417 353275 2-6 x 6-8 x 1-3/8" 422 358279 2-8 x 6-8 x 1-3/8" 426 362295 3-0 x 6-8 x 1-3/8" 442 378

2-0 x 6-8 Double 1-0 $607 $517


Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" F-66 SIX PANEL FIR

$476 FIR6P68 1-0 x x 6-8 x 1-3/8" $623 $559

476 1-3 x 6-8 x 1-3/8" 623 559476 1-4 x 6-8 x 1-3/8" 623 559476 1-6 x 6-8 x 1-3/8" 623 559532 1-8 x 6-8 x 1-3/8" 679 615532 2-0 x 6-8 x 1-3/8" 679 615545 2-4 x 6-8 x 1-3/8" 692 628559 2-6 x 6-8 x 1-3/8" 706 642566 2-8 x 6-8 x 1-3/8" 713 649576 3-0 x 6-8 x 1-3/8" 723 659

2-0 x 6-8 Double 1-0 $1,164 $1,074

2-6 x 6-8 Double 1-3 1,164 1,0742-8 x 6-8 Double 1-4 1,164 1,0743-0 x 6-8 Double 1-6 1,164 1,0743-4 x 6-8 Double 1-8 1,275 1,1854-0 x 6-8 Double 2-0 1,275 1,1854-8 x 6-8 Double 2-4 1,301 1,2115-0 x 6-8 Double 2-6 1,328 1,2385-4 x 6-8 Double 2-8 1,342 1,2526-0 x 6-8 Double 3-0 1,364 1,274


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" MDF 3 Panel SHAKER Primed / Flat Panel

$84 001-035 1-0 x x 6-8 x 1-3/8" $231 $167$8484 1-3 x

$147 PRMMDF3P68 1-4 x 6-8 x 1-3/8" $294 $230158 1-6 x 6-8 x 1-3/8" 305 241168 1-8 x 6-8 x 1-3/8" 315 251198 2-0 x 6-8 x 1-3/8" 345 281222 2-4 x 6-8 x 1-3/8" 369 305256 2-6 x 6-8 x 1-3/8" 403 339247 2-8 x 6-8 x 1-3/8" 394 330272 3-0 x 6-8 x 1-3/8" 419 355

Shaker Style Flat Panel Doors Solid stile construction 2-0 x 6-8 Double 1-0 $375 $288

2-6 x 6-8 Double 1-3 375 2882-8 x 6-8 Double 1-4 $504 $4143-0 x 6-8 Double 1-6 526 4363-4 x 6-8 Double 1-8 548 4584-0 x 6-8 Double 2-0 606 5164-8 x 6-8 Double 2-4 655 5655-0 x 6-8 Double 2-6 724 6345-4 x 6-8 Double 2-8 704 6146-0 x 6-8 Double 3-0 755 665


Panel edges are kerfed and squeezed during panel

insertion,allowing them to expand and grip the inside door framing, eliminating

rattling.

Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:




001-035 1-0 x x 6-8 x 1-3/8" $147 $83$84

001-035 1-3 x $145 PRMMDF5P68 1-4 x 6-8 x 1-3/8" $292 $228160 1-6 x 6-8 x 1-3/8" 307 243172 1-8 x 6-8 x 1-3/8" 319 255192 2-0 x 6-8 x 1-3/8" 339 275215 2-4 x 6-8 x 1-3/8" 362 298227 2-6 x 6-8 x 1-3/8" 374 310239 2-8 x 6-8 x 1-3/8" 386 322262 3-0 x 6-8 x 1-3/8" 409 345

Shaker Style Flat Panel Doors Solid stile construction. $207 $120

207 1202-8 x 6-8 Double 1-4 $502 $4123-0 x 6-8 Double 1-6 531 4413-4 x 6-8 Double 1-8 555 4654-0 x 6-8 Double 2-0 596 5064-8 x 6-8 Double 2-4 641 5515-0 x 6-8 Double 2-6 665 5755-4 x 6-8 Double 2-8 688 5986-0 x 6-8 Double 3-0 736 646

Panel edges are kerfed and squeezed during panel

insertion,allowing them to expand and grip the inside door framing, eliminating

rattling.


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Eyebrow Textured / CAMDEN Hollow Core

$87 2PET 1-0 x x 6-8 x 1-3/8" $234 $170$8487 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296

2-6 x 6-8 Double 1-3 $386 $2962-8 x 6-8 Double 1-4 386 2963-0 x 6-8 Double 1-6 380 2903-4 x 6-8 Double 1-8 398 3084-0 x 6-8 Double 2-0 392 3024-8 x 6-8 Double 2-4 403 3135-0 x 6-8 Double 2-6 408 3185-4 x 6-8 Double 2-8 422 3326-0 x 6-8 Double 3-0 430 340


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Eyebrow Smooth / PRINCETON Hollow Core

$87 2PE 1-0 x x 6-8 x 1-3/8" $234 $170$84

1-3 x 6-8 x 1-3/8"

87 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296$379 $289


Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Radius Top Smooth / CAIMAN ( ROMAN ) Hollow Core

$87 2PR 1-0 x x 6-8 x 1-3/8" $234 $170$8487 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296$379 $289



Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Radius Plank Smooth - / SANTA FE Hollow Core

$87 2PRV 1-0 x x 6-8 x 1-3/8" $234 $170$8487 1-3 x x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296



Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Square Top Smooth - / CARRARA Hollow Core

$87 2P 1-0 x x 6-8 x 1-3/8" $234 $170$8487 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296


Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Square Top Smooth - / CARRARA Solid Core

$84 $231 $167$8484 1-3 x 84 231 167

193 2PS 1-6 x 6-8 x 1-3/8" 340 276189204 2-0 x 6-8 x 1-3/8" 351 287207 2-4 x 6-8 x 1-3/8" 354 290207 2-6 x 6-8 x 1-3/8" 354 290215 2-8 x 6-8 x 1-3/8" 362 298219 3-0 x 6-8 x 1-3/8" 366 302

2-0 x 6-8 Double 1-0 $379 $289$379 $289



Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 1 Panel Shaker Smooth - / MADISON Hollow Core

$115 1PF 1-0 x x 6-8 x 1-3/8" $262 $198

1-3 x 115 1-4 x 6-8 x 1-3/8" 262 198112 1-6 x 6-8 x 1-3/8" 259 195

118 2-0 x 6-8 x 1-3/8" 265 201124 2-4 x 6-8 x 1-3/8" 271 207126 2-6 x 6-8 x 1-3/8" 273 209133 2-8 x 6-8 x 1-3/8" 280 216137 3-0 x 6-8 x 1-3/8" 284 220

2-0 x 6-8 Double 1-0 $441 $351

2-6 x 6-8 Double 1-3

2-8 x 6-8 Double 1-4 441 3513-0 x 6-8 Double 1-6 436 346

4-0 x 6-8 Double 2-0 447 3574-8 x 6-8 Double 2-4 458 3685-0 x 6-8 Double 2-6 463 3735-4 x 6-8 Double 2-8 478 3886-0 x 6-8 Double 3-0 486 396


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 2 Panel Shaker Smooth - / MONROE Hollow Core

$115 2PF 1-0 x x 6-8 x 1-3/8" $262 $198

1-3 x 115 1-4 x 6-8 x 1-3/8" 262 198112 1-6 x 6-8 x 1-3/8" 259 195

83118 2-0 x 6-8 x 1-3/8" 265 201124 2-4 x 6-8 x 1-3/8" 271 207126 2-6 x 6-8 x 1-3/8" 273 209133 2-8 x 6-8 x 1-3/8" 280 216137 3-0 x 6-8 x 1-3/8" 284 220

2-0 x 6-8 Double 1-0 $441 $351

2-8 x 6-8 Double 1-4 441 3513-0 x 6-8 Double 1-6 436 346

4-0 x 6-8 Double 2-0 447 3574-8 x 6-8 Double 2-4 458 3685-0 x 6-8 Double 2-6 463 3735-4 x 6-8 Double 2-8 478 3886-0 x 6-8 Double 3-0 486 396

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 4 Panel Square Top Smooth- / COVENTRY Hollow Core

$87 4P 1-0 x x 6-8 x 1-3/8" $234 $170

87 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296



Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 5 Panel Smooth - / ROCKPORT Hollow Core

$87 5P 1-4 x 6-8 x 1-3/8" $234 $17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-8 x 6-8 Double 1-4 $386 $2963-0 x 6-8 Double 1-6 380 2903-4 x 6-8 Double 1-8 398 3084-0 x 6-8 Double 2-0 392 3024-8 x 6-8 Double 2-4 403 3135-0 x 6-8 Double 2-6 408 3185-4 x 6-8 Double 2-8 422 3326-0 x 6-8 Double 3-0 430 340

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 5 Panel Smooth - / ROCKPORT Solid Core

1-0 x x 6-8 x 1-3/8" $147 $83New

1-3 x 1-4 x 6-8 x 1-3/8" 147 83

193 5PS 1-6 x 6-8 x 1-3/8" $340 $276207 1-8 x 6-8 x 1-3/8" 354 290204 2-0 x 6-8 x 1-3/8" 351 287207 2-4 x 6-8 x 1-3/8" 354 290207 2-6 x 6-8 x 1-3/8" 354 290215 2-8 x 6-8 x 1-3/8" 362 298219 3-0 x 6-8 x 1-3/8" 366 302

2-0 x 6-8 Double 1-0 $207 $120$207 $120

2-6 x 6-8 Double 1-3 207 1202-8 x 6-8 Double 1-4 $207 $1203-0 x 6-8 Double 1-6 $593 $5063-4 x 6-8 Double 1-8 621 5344-0 x 6-8 Double 2-0 614 5274-8 x 6-8 Double 2-4 621 5345-0 x 6-8 Double 2-6 621 5345-4 x 6-8 Double 2-8 638 5516-0 x 6-8 Double 3-0 645 558


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 6 Panel Textured / COLONIST Hollow Core

$87 6PT 1-0 x x 6-8 x 1-3/8" $234 $17087 1-2 x 6-8 x 1-3/8" 234 17087 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $2962-4 x 6-8 Double 1-2 386 2962-6 x 6-8 Double 1-3 386 2962-8 x 6-8 Double 1-4 386 2963-0 x 6-8 Double 1-6 380 2903-4 x 6-8 Double 1-8 398 3084-0 x 6-8 Double 2-0 392 3024-8 x 6-8 Double 2-4 403 3135-0 x 6-8 Double 2-6 408 3185-4 x 6-8 Double 2-8 422 3326-0 x 6-8 Double 3-0 430 340


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 6 Panel Smooth / COLONIST Hollow Core

$87 6P 1-0 x x 6-8 x 1-3/8" $234 $170

87 1-3 x 6-8 x 1-3/8" 234 17087 1-4 x 6-8 x 1-3/8" 234 17085 1-6 x 6-8 x 1-3/8" 232 16894 1-8 x 6-8 x 1-3/8" 241 17791 2-0 x 6-8 x 1-3/8" 238 17496 2-4 x 6-8 x 1-3/8" 243 17998 2-6 x 6-8 x 1-3/8" 245 181

106 2-8 x 6-8 x 1-3/8" 253 189110 3-0 x 6-8 x 1-3/8" 257 193

2-0 x 6-8 Double 1-0 $386 $296


Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 6 Panel Smooth / COLONIST Solid Core

1-0 x x 6-8 x 1-3/8" $147 $83

1-3 x 1-4 x 6-8 x 1-3/8" 147 83

$193 6PS 1-6 x 6-8 x 1-3/8" $340 $276207 1-8 x 6-8 x 1-3/8" 354 290204 2-0 x 6-8 x 1-3/8" 351 287207 2-4 x 6-8 x 1-3/8" 354 290207 2-6 x 6-8 x 1-3/8" 354 290215 2-8 x 6-8 x 1-3/8" 362 298219 3-0 x 6-8 x 1-3/8" 366 302

2-0 x 6-8 Double 1-0 $211 $121$211 $121

2-6 x 6-8 Double 1-3 211 1212-8 x 6-8 Double 1-4 $211 $1213-0 x 6-8 Double 1-6 $597 $5073-4 x 6-8 Double 1-8 625 5354-0 x 6-8 Double 2-0 618 5284-8 x 6-8 Double 2-4 625 5355-0 x 6-8 Double 2-6 625 5355-4 x 6-8 Double 2-8 642 5526-0 x 6-8 Double 3-0 649 559

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:




#REF!#REF!#REF!

0 x 8-0 x 1-3/8" 216 123$222 PRMMDF3P680 1-6 x 8-0 x 1-3/8" $438 $345241 1-8 x 8-0 x 1-3/8" 457 364266 2-0 x 8-0 x 1-3/8" 482 389296 2-4 x 8-0 x 1-3/8" 512 419321 2-6 x 8-0 x 1-3/8" 537 444330 2-8 x 8-0 x 1-3/8" 546 453359 3-0 x 8-0 x 1-3/8" 575 482

Shaker Style Flat Panel Doors Solid stile construction.

2-8 Double 1-4 290 2123-0 8-0 Double 1-6 $735 $657 3-4 8-0 Double 1-8 772 6944-0 8-0 Double 2-0 823 7454-8 8-0 Double 2-4 881 8035-0 8-0 Double 2-6 933 855

Primed, MDF panels. 5-4 8-0 Double 2-8 949 8716-0 8-0 Double 3-0 1,007 929

Panel edges are kerfed and squeezed during panel insertion,allowing them to

expand and grip the inside door framing, eliminating rattling.


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" MDF 5 ** Panel SHAKER Primed / Flat Panel

#REF!** note - 8'0" doors have 6 horizontal panels

#REF!#REF! 1-4 x 8-0 x 1-3/8" 216 123$236 PRMMDF5P680 1-6 x 8-0 x 1-3/8" $452 $359244 1-8 x 8-0 x 1-3/8" 460 367288 2-0 x 8-0 x 1-3/8" 504 411320 2-4 x 8-0 x 1-3/8" 536 443353 2-6 x 8-0 x 1-3/8" 569 476370 2-8 x 8-0 x 1-3/8" 586 493402 3-0 x 8-0 x 1-3/8" 618 525

Shaker Style Flat Panel Doors Solid stile construction.

2-8 Double 1-4

3-0 8-0 Double 1-6 $762 $684 3-4 8-0 Double 1-8 777 6994-0 8-0 Double 2-0 865 7874-8 8-0 Double 2-4 930 8525-0 8-0 Double 2-6 997 919

Primed, MDF panels. 5-4 8-0 Double 2-8 1,030 9526-0 8-0 Double 3-0 1,095 1,017

Panel edges are kerfed and squeezed during panel insertion,allowing them to

expand and grip the inside door framing, eliminating rattling.

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 1 Panel Shaker Smooth - / MADISON Hollow Core

$212 $428 $335$212212212 1-4 x 8-0 x 1-3/8" 428 335217 1PF8 1-6 x 8-0 x 1-3/8" $433 $340

1-8 x 8-0 x 1-3/8" 216 123222 2-0 x 8-0 x 1-3/8" 438 345230 2-4 x 8-0 x 1-3/8" 446 353231 2-6 x 8-0 x 1-3/8" 447 354242 2-8 x 8-0 x 1-3/8" 458 365254 3-0 x 8-0 x 1-3/8" 470 377

$715 $637$715 $637715 637

2-8 Double 1-4 715 6373-0 8-0 Double 1-6 723 645 3-4 8-0 Double 1-8 290 2124-0 8-0 Double 2-0 733 6554-8 8-0 Double 2-4 750 6725-0 8-0 Double 2-6 752 6745-4 8-0 Double 2-8 774 6966-0 8-0 Double 3-0 798 720


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Shaker Smooth - / MONROE Hollow Core

$212 $428 $335$212212212 1-4 x 8-0 x 1-3/8" 428 335

$217 2PF8 1-6 x 8-0 x 1-3/8" $433 $340$216 1-8 x 8-0 x 1-3/8" 432 339222 2-0 x 8-0 x 1-3/8" 438 345230 2-4 x 8-0 x 1-3/8" 446 353231 2-6 x 8-0 x 1-3/8" 447 354242 2-8 x 8-0 x 1-3/8" 458 365254 3-0 x 8-0 x 1-3/8" 470 377

$715 $637$715 $637715 637

2-8 Double 1-4 715 6373-0 x 8-0 Double 1-6 $723 $645 3-4 8-0 Double 1-8 721 6434-0 x 8-0 Double 2-0 733 6554-8 x 8-0 Double 2-4 750 6725-0 x 8-0 Double 2-6 752 6745-4 x 8-0 Double 2-8 774 6966-0 x 8-0 Double 3-0 798 720


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Radius Top Smooth / CAIMAN ( ROMAN ) Hollow Core

$172 $388 $295$172$172 2PR8 1-3 x 8-0 x 1-3/8" $388 $295177 1-4 x 8-0 x 1-3/8" 393 300171 1-6 x 8-0 x 1-3/8" 387 294182 1-8 x 8-0 x 1-3/8" 398 305176 2-0 x 8-0 x 1-3/8" 392 299185 2-4 x 8-0 x 1-3/8" 401 308186 2-6 x 8-0 x 1-3/8" 402 309197 2-8 x 8-0 x 1-3/8" 413 320209 3-0 x 8-0 x 1-3/8" 425 332

$634 $556$634 $556


Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Radius Plank Smooth - / SANTA FE Hollow Core

$172 $388 $295$172172

$177 2PRV8 1-4 x 8-0 x 1-3/8" $393 $300171 1-6 x 8-0 x 1-3/8" 387 294182 1-8 x 8-0 x 1-3/8" 398 305176 2-0 x 8-0 x 1-3/8" 392 299185 2-4 x 8-0 x 1-3/8" 401 308186 2-6 x 8-0 x 1-3/8" 402 309197 2-8 x 8-0 x 1-3/8" 413 320209 3-0 x 8-0 x 1-3/8" 425 332

2-8 8-0 Double 1-4 $644 $5663-0 8-0 Double 1-6 632 554 3-4 8-0 Double 1-8 654 5764-0 8-0 Double 2-0 642 5644-8 8-0 Double 2-4 659 5815-0 8-0 Double 2-6 662 5845-4 8-0 Double 2-8 683 6056-0 8-0 Double 3-0 707 629


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Eyebrow Top Smooth / PRINCETON Hollow Core

$172 $388 $295$172

$176.90 1-3 x 8-0 x 1-3/8"

$177 2PE8 1-4 x 8-0 x 1-3/8" 393 300171 1-6 x 8-0 x 1-3/8" 387 294182 1-8 x 8-0 x 1-3/8" 398 305176 2-0 x 8-0 x 1-3/8" 392 299185 2-4 x 8-0 x 1-3/8" 401 308186 2-6 x 8-0 x 1-3/8" 402 309197 2-8 x 8-0 x 1-3/8" 413 320209 3-0 x 8-0 x 1-3/8" 425 332

$634 $556$634 $556

2-6 8-0 Double 1-3 $644 $5662-8 8-0 Double 1-4 $644 $566

3-0 x 8-0 Double 1-6 632 5543-4 x 8-0 Double 1-8 654 5764-0 x 8-0 Double 2-0 642 5644-8 x 8-0 Double 2-4 659 5815-0 x 8-0 Double 2-6 662 5845-4 x 8-0 Double 2-8 683 6056-0 x 8-0 Double 3-0 707 629


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Square Top Smooth - / CARRARA Hollow Core

$172 $388 $295$172172172 388 295

$171 2P8 1-6 x 8-0 x 1-3/8" $387 $294216 123

176 2-0 x 8-0 x 1-3/8" 392 299185 2-4 x 8-0 x 1-3/8" 401 308186 2-6 x 8-0 x 1-3/8" 402 309197 2-8 x 8-0 x 1-3/8" 413 320209 3-0 x 8-0 x 1-3/8" 425 332

$634 $556$634 $556634 556634 556

3-0 x 8-0 Double 1-6 $632 $554 3-4 290 2124-0 x 8-0 Double 2-0 642 5644-8 x 8-0 Double 2-4 659 5815-0 x 8-0 Double 2-6 662 5845-4 x 8-0 Double 2-8 683 6056-0 x 8-0 Double 3-0 707 629


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 2 Panel Square Top Smooth - / CARRARA Solid Core

$216 $123

216 123$313 2PS8 1-6 x 8-0 x 1-3/8" $529 $436347 $563 $470342 2-0 x 8-0 x 1-3/8" 558 465353 2-4 x 8-0 x 1-3/8" 569 476353 2-6 x 8-0 x 1-3/8" 569 476358 2-8 x 8-0 x 1-3/8" 574 481370 3-0 x 8-0 x 1-3/8" 586 493

290 2123-0 x 8-0 Double 1-6 $917 $839 3-4 $985 $9074-0 x 8-0 Double 2-0 974 8964-8 x 8-0 Double 2-4 997 9195-0 x 8-0 Double 2-6 997 9195-4 x 8-0 Double 2-8 1,007 9296-0 x 8-0 Double 3-0 1,030 952

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 4 Panel Square Top Smooth- / COVENTRY Hollow Core

$172 1-0 x 8-0 x 1-3/8" $388 $295$172 1-2 x 8-0 x 1-3/8"

172 1-3 x 8-0 x 1-3/8"

$177 4P8 1-4 x 8-0 x 1-3/8" $393 $300171 1-6 x 8-0 x 1-3/8" 387 294182 1-8 x 8-0 x 1-3/8" 398 305176 2-0 x 8-0 x 1-3/8" 392 299185 2-4 x 8-0 x 1-3/8" 401 308186 2-6 x 8-0 x 1-3/8" 402 309197 2-8 x 8-0 x 1-3/8" 413 320209 3-0 x 8-0 x 1-3/8" 425 332

2-0 Double 1-0 $626 $545 2-4 Double 1-2 $626 $5452-6 Double 1-3 634 5562-8 8-0 Double 1-4 $644 $5663-0 8-0 Double 1-6 632 554 3-4 8-0 Double 1-8 654 5764-0 8-0 Double 2-0 642 5644-8 8-0 Double 2-4 659 5815-0 8-0 Double 2-6 662 5845-4 8-0 Double 2-8 683 6056-0 8-0 Double 3-0 707 629


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 5 Panel Smooth - / ROCKPORT Hollow Core8'0" Rockport Door has six panels

$172 $388 $295$172172


$634 $556634 556



Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 5 Panel Smooth - / ROCKPORT Solid Core8'0" Rockport Door has six panels

$301 $517 $424$301301301 517 424

$313 5PS8 New 1-6 x 8-0 x 1-3/8" $529 $436347 1-8 x 8-0 x 1-3/8" 563 470342 2-0 x 8-0 x 1-3/8" 558 465353 2-4 x 8-0 x 1-3/8" 569 476353 2-6 x 8-0 x 1-3/8" 569 476358 2-8 x 8-0 x 1-3/8" 574 481370 3-0 x 8-0 x 1-3/8" 586 493

$893 $815$893 $815893 815893 815

3-0 8-0 Double 1-6 $917 $839 3-4 8-0 Double 1-8 985 9074-0 8-0 Double 2-0 974 8964-8 8-0 Double 2-4 997 9195-0 8-0 Double 2-6 997 9195-4 8-0 Double 2-8 1,007 9296-0 8-0 Double 3-0 1,030 952

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 6 Panel Smooth / COLONIST Hollow Core

$172 $388 $295$172172


$634 $556634 556


Single Units

Double Units

Door Only


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



8'0" 6 Panel Smooth / COLONIST Solid Core

$301 $517 $424$301301301 517 424

$313 6PS8 1-6 x 8-0 x 1-3/8" $529 $436347 1-8 x 8-0 x 1-3/8" 563 470342 2-0 x 8-0 x 1-3/8" 558 465353 2-4 x 8-0 x 1-3/8" 569 476353 2-6 x 8-0 x 1-3/8" 569 476358 2-8 x 8-0 x 1-3/8" 574 481370 3-0 x 8-0 x 1-3/8" 586 493

3-0 8-0 Double 1-6 $917 $839 3-4 8-0 Double 1-8 985 9074-0 8-0 Double 2-0 974 8964-8 8-0 Double 2-4 997 9195-0 8-0 Double 2-6 997 9195-4 8-0 Double 2-8 1,007 9296-0 8-0 Double 3-0 1,030 952


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" PINE LOUVER / LOUVER

$246 PINELVR/LVR68 1-0 x 6-8 x 1-3/8" $393 $329

246 1-3 x 6-8 x 1-3/8"

246 1-4 x 6-8 x 1-3/8" 393 329246 1-6 x 6-8 x 1-3/8" 393 329258 1-8 x 6-8 x 1-3/8" 405 341281 2-0 x 6-8 x 1-3/8" 428 364310 2-4 x 6-8 x 1-3/8" 457 393325 2-6 x 6-8 x 1-3/8" 472 408339 2-8 x 6-8 x 1-3/8" 486 422368 3-0 x 6-8 x 1-3/8" 515 451

2-0 Double 1-0 $702 $612$211 $121

2-6 Double 1-3 702 6122-8 Double 1-4 702 6123-0 Double 1-6 702 612 3-4 Double 1-8 727 6374-0 Double 2-0 774 6844-8 Double 2-4 831 7415-0 Double 2-6 860 7705-4 Double 2-8 889 7996-0 Double 3-0 947 857

Double Units

Specify on which side of the door that the slats are down.

Note: Our standard will be "slats down" on hinge pin side of door,

unless otherwise specified.



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" & 8'0" PINE 1 Light Interior French Clear Glass

One Lite Pine 6-8$283 PINE1LT68 2-0 x 6-8 x 1-3/8" 1 Lt $430 $366321 2-6 x 6-8 x 1-3/8" 1 Lt 468 404330 2-8 x 6-8 x 1-3/8" 1 Lt 477 413352 3-0 x 6-8 x 1-3/8" 1 Lt 499 435

4-0 Double 2-0 $777 $6875-0 Double 2-6 853 7635-4 Double 2-8 870 7806-0 Double 3-0 916 826

One Lite Pine 8-0$405 PINE1LT80 2-0 x 8-0 x 1-3/8" 1 Lt $621 $528429 2-6 x 8-0 x 1-3/8" 1 Lt 645 552442 2-8 x 8-0 x 1-3/8" 1 Lt 658 565469 3-0 x 8-0 x 1-3/8" 1 Lt 685 592

4-0 Double 2-0 1 Lt $1,100 $1,0225-0 Double 2-6 1 Lt 1,149 1,0715-4 Double 2-8 1 Lt 1,175 1,0976-0 Double 2-8 1 Lt 1,229 1,151

Double Units

Single Units

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 10 / 15 Light Interior French Fir Clear Glass

$550 FIR5LT68 1-6 x 6-8 x 1-3/8" 5 Lt $697 $633

$550 FIR10LT68 2-0 x 6-8 x 1-3/8" 10 Lt 697 633

$600 FIR15LT68 2-6 x 6-8 x 1-3/8" 15 Lt 747 683$614 2-8 x 6-8 x 1-3/8" 15 Lt 761 697$628 3-0 x 6-8 x 1-3/8" 15 Lt 775 711

3-0 Double 1-6 $1,312 $1,222

4-0 Double 2-0 1,312 1,222

5-0 Double 2-6 1,411 1,3215-4 Double 2-8 1,439 1,3496-0 Double 3-0 1,467 1,377

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" 10 / 15 Light Interior French Primed Clear Glass

$277 PRIM10LT68 2-0 x 6-8 x 1-3/8" 10 Lt $424 $360

296 PRIM15LT68 2-6 x 6-8 x 1-3/8" 15 Lt 443 379331 2-8 x 6-8 x 1-3/8" 15 Lt 478 414352 3-0 x 6-8 x 1-3/8" 15 Lt 499 435

4-0 Double 2-0 $764 $674

5-0 Double 2-6 804 7145-4 Double 2-8 873 7836-0 Double 3-0 914 824


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



6'8" Pantry Door - Primed - 1 Light etched glass with "Pantry" design.

$497 PRIMPANTRY68 2-0 x 6-8 x 1-3/8" $644 $580

576 2-6 x 6-8 x 1-3/8" 723 659588 2-8 x 6-8 x 1-3/8" 735 671

4-0 Double 2-6 $1,205 $1,115

5-0 Double 2-8 1,363 1,273 5-4 Double 3-0 1,386 1,296

Specify "Pantry" design on:Hinge pin side if doors opens into kitchen, Opposite hinge pin if door opens in to pantry.

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



This page blank for future use


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



Flush LAUAN -Hollow Core

$68 LAU 1-0 x 6-8 x 1-3/8" $215 $15168 1-3 x 6-8 x 1-3/8" 215 15168 1-4 x 6-8 x 1-3/8" 215 15168 1-6 x 6-8 x 1-3/8" 215 15176 1-8 x 6-8 x 1-3/8" 223 15976 1-10 x 6-8 x 1-3/8" 223 15976 2-0 x 6-8 x 1-3/8" 223 15984 2-4 x 6-8 x 1-3/8" 231 16787 2-6 x 6-8 x 1-3/8" 234 17090 2-8 x 6-8 x 1-3/8" 237 17397 3-0 x 6-8 x 1-3/8" 244 180

2-0 Double 1-0 $347 $2572-6 Double 1-3 347 2572-8 Double 1-4 347 2573-0 Double 1-6 347 257 3-4 Double 1-8 362 272 3-8 Double 1-10 362 2724-0 Double 2-0 362 2724-8 Double 2-4 378 2885-0 Double 2-6 385 2955-4 Double 2-8 391 3016-0 Double 3-0 404 314

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



Flush BIRCH -Hollow Core

$98.08 BIR 1-0 x 6-8 x 1-3/8" $245 $181

98.08 1-3 x 6-8 x 1-3/8" 245 18198.08 1-4 x 6-8 x 1-3/8" 245 18196.50 1-6 x 6-8 x 1-3/8" 244 180

108.67 1-8 x 6-8 x 1-3/8" 256 192106.92 2-0 x 6-8 x 1-3/8" 254 190118.88 2-4 x 6-8 x 1-3/8" 266 202122.12 2-6 x 6-8 x 1-3/8" 269 205126.56 2-8 x 6-8 x 1-3/8" 274 210138.01 3-0 x 6-8 x 1-3/8" 285 221

2-0 Double 1-0 $407 $317

2-6 Double 1-3 407 3172-8 Double 1-4 407 3173-0 Double 1-6 404 314 3-4 Double 1-8 428 3384-0 Double 2-0 425 3354-8 Double 2-4 449 3595-0 Double 2-6 455 3655-4 Double 2-8 464 3746-0 Double 3-0 487 397


Double Units


of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



Flush HARDBOARD -Hollow Core Primed

86.08 HBDP 1-0 x 6-8 x 1-3/8" 233 16986.08 1-3 x 6-8 x 1-3/8" 233 16986.08 1-4 x 6-8 x 1-3/8" 233 16984.72 1-6 x 6-8 x 1-3/8" 232 168

147 8390.45 2-0 x 6-8 x 1-3/8" 237 17393.40 2-4 x 6-8 x 1-3/8" 240 17696.35 2-6 x 6-8 x 1-3/8" 243 17999.47 2-8 x 6-8 x 1-3/8" 246 182

103.64 3-0 x 6-8 x 1-3/8" 251 187103.64 * 3-0 x 6-7 x 1-3/8"

*DOOR ONLY PRE-FIT TO 6-7 height

2-0 Double 1-0 383 293 2-6 Double 1-0 383 2932-8 Double 1-4 383 2933-0 Double 1-6 380 290

4-0 Double 2-0 392 3024-8 Double 2-4 398 3085-0 Double 2-6 404 3145-4 Double 2-8 410 3206-0 Double 3-0 418 328

Double Units



of 306 9/28/20













3-1/4" C-11 Casing


CLEAR FIR

PRIMEDINTERIOR UNIT

SPECIFICATIONS:



This page blank for future use.



of 306 9/28/20





Interior Barn Doors

Knotty Alder - Rustic K Bar DesignSIZE Major / Minor DOOR ONLY

LIST PRICE

001-0072-6 x 7-0 x 1-3/8" ALDE1P70 $5972-8 x 7-0 x 1-3/8" 6313-0 x 7-0 x 1-3/8" 631

These doors have a 10" bottom rail that can be trimmed to adjust height.

Other sizes available by special order.

2-0 x 7-0 x 1-3/8" this size non-stock * $6413-6 x 7-0 x 1-3/8" this size non-stock * 710

* subject to availability

Please see our selection of Barn Door Sliding Hardwarein Section 18, page 7.


of 306 9/28/20





OPTIONS FOR INTERIOR DOOR UNITS

Jamb Options for 6'8" highFor ALL rip down jambs- other than stock widths Single Unit ADD $20.00 $20.00

Double Unit ADD 20.00 20.00

For one piece jambs 4-7/8" or 5-1/4" Single Unit ADD $32.00 $32.00Double Unit ADD 38.00 36.00

For one piece jambs 6-5/8" Single Unit ADD $33.00 $46.00Double Unit ADD 37.00 52.00

For one piece jambs 8-7/8" * Single Unit ADD na $52.00 * Primed only Double Unit ADD 58.00

For adjustable (split) jambs Single Unit ADD $9.00 $6.00Double Unit ADD 10.00 8.00

Jamb Options for 8'0" highFor one piece jambs 4-7/8" or 5-1/4"" Single Unit ADD na $28.00

Primed only Double Unit ADD na 32.00For one piece jambs 6-5/8" Single Unit ADD na $32.00

Primed only Double Unit na 36.00

For one piece jambs 8-7/8" Single Unit na $48.00Primed only Double Unit na 56.00

Casing Options 6'8" or 8'0"For 7/8" x 3-1/4" C-11 Casing Single Unit ADD $32.00 $20.00

Double Unit ADD 36.00 25.00For 11/16"x3-1/2" 1X4 S4S Casing -Primed Single Unit ADD $27.00

(Specify mitered corners or butt joint) Double Unit ADD 37.00For 11/16"x3-1/2" 1X4 S4S w/1x6 -Header Single Unit ADD $36.00

(1X6 header shipped loose) 45.00For 11/16"x5-1/4" 1X6 S4S Casing -Primed Single Unit ADD $74.00

(1X6 casing shipped loose) Double Unit ADD 94.00For 1" x 3-1/2" RB-3 Casing (Primed) Single Unit ADD na $68.00

Primed only Double Unit ADD na 94.00For 1-1/8" x 3-1/4" C-24 Casing (Primed) Single Unit ADD na $79.00

Primed only Double Unit ADD na 79.00

For 1-1/16" x 4 " C-12 Casing (Primed) Single Unit ADD na $52.00 Primed only Double Unit ADD na 63.00

For No Casing Single Unit DEDUCT $20.00 $16.00Double Unit DEDUCT 24.00 20.00

PrimedUnits

ClearUnits


of 306 9/28/20






HARDWARE

For Primed Hinges ADD 2.00 4.00

For Premium Hinges * ADD 4.00 8.00 * Premium Stock hinges include BB - Bright Brass SN - Satin Nickel AN - Antique Nickel DC - Satin Chrome AB - Antique Brass CB - Colonial Bronze

For Ball Bearing Hinges ADD 22.00 44.00some finishes may be special order

For Ball Catches ( w/ Bright Brass strike plate ) 15.00 30.00 Specify strike finishes: BB,DC,AN,CB,SN,AB

For DOOR-MAX Magnetic catch 20.00 40.00

MISCELLANEOUS

For Cut Down Height ADD $102.00 $150.00For Full Bound, Cut Down Unit ADD 122.00 170.00

Door Only: Bore and Mortise for Hingesper our standard specifications.** $30.00** see specifications on page 2 of this section.

Special set-up charge for special bore and hinge prep location $120.00 ( 2-1/8" lock bore, and 3.5" or 4", w/5/8" radius hinge mortise only )

For interior pine astragal no bolt ADD $70.00 (Note: Adds 5/8" to RO width, unless specified otherwise.)

For interior pine astragal with 6" mortised ADD $95.00 head bolt (stock, slide action bolt)

Units UnitsSingle Double


of 306 9/28/20







Attic Access Door Units

with Attic Access* Bumper SillFrame only - with Attic Access sill $216

Add door of choiceCan be used with 1-3/8" hollow core or solid core door.

Specify open into the room, or open into the attic.

For doors that open into the attic a standard bumper sill can be provided.For Mill finished bumper sill to above price ADD $42For Bronze finished bumper sill to above price ADD $50

For other casing and hardware options see page 34 & 35 in this section.

LIST PRICE

*The Atttic Access Sill is designed for attic access doors that swing into the conditioned space. From the interior room side the sill is not showing under the door. With a

matching1-3/8" door, the finished unit looks like all the rest.

2-1/4" primed casing, 2 sides

4-5/8" Rabetted, paint grade, jamb, with weatherstrip

1-1/2 pair 3-1/2" 2D (brasstone) hinges

2-1/8" lock bore, 2-3/8" backset.


of 306 9/28/20




Section 4 Page 1 Effective: Sept. 28, 2020

INTERIOR 20 MINUTE DOORS and UNITSUnit Specifications:

Options:

For FrameSaver Primed 4-9/16" jamb ADD: $26.00

For MILL adjustable sill ADD: $12.36

For BRONZE adjustable sill ADD: $20.43

For Open out Mill sill & NRP hinges ADD: $22.95

For Open out Bronze sill & NRP hinges ADD: $34.02For Premium Hinges ADD: $4.00No Sill & No WeatherStrip DEDUCT: $18.00

Moulded Panel Designs See next page for Shaker Flat Panels

CAIMAN PRINCETON CAMDEN SANTE FE CARRARA COVENTRY ROCKPORT COLONISTSmooth Smooth Textured Smooth Smooth Smooth Smooth Smooth

2 Pnl 2 Pnl Arch 2 Pnl Arch 2 Pnl Arch 2 Pnl 4 Pnl 5 Pnl 6 PnlRoman Plank Square Horizontal

Arch (8' Rockportis 6 Pnl)

Stock Sizes2-8x6-8 3-0x6-8

2-8x8-0 3-0x8-0

Door Only* Door Only

LIST SIZE Net Size

$268 001-035 2-8 x 6-8 x 1-3/4" 31 3/4" x 79" $495 $436

271 001-035 3-0 x 6-8 x 1-3/4" 35 3/4" x 79" 498 439

382 001-035 2-8 x 8-0 x 1-3/4" 31 3/4" x 95" 650 595

393 001-035 3-0 x 8-0 x 1-3/4" 35 3/4" x 95" 661 606

PrimedFrame

* Door only price includes machining for standard hingesand is labeled with WH metal label applied.

Clear FirFrame

Unit PriceSingle Units

20 minute WH labeled 1-1/4" , 4-9/16" Primed, rabetted frame, one side primed WM180 casing,1-1/2 pair 4" hinges, standard 2-1/8" lock bore,

with weatherstrip, and open in fixed mill sill.

See Exterior Options in Section 4B for other jamb, sill, and trim choices.


of 306 9/28/20



INTERIOR 20 MINUTE DOORS and UNITSUnit Specifications:

Options:

For FrameSaver Primed 4-9/16" jamb ADD: $26.00

For MILL adjustable sill ADD: $12.36

For BRONZE adjustable sill ADD: $20.43

For Open out Mill sill & NRP hinges ADD: $22.95

For Open out Bronze sill & NRP hinges ADD: $34.02For Premium Hinges ADD: $4.00No Sill & No WeatherStrip DEDUCT: $18.00

20 minute WH labeled 1-1/4" , 4-9/16" Primed, rabetted frame, one side primed WM180 casing,1-1/2 pair 4" hinges, standard 2-1/8" lock bore,

with weatherstrip, and open in fixed mill sill.

See Exterior Options in Section 4B for other jamb, sill, and trim choices.

Shaker Flat Panel See previous page for Moulded Panel Designs

MADISON MONROESmooth Smooth Primed Primed1 Pnl 2 Pnl 3 Pnl 5 Pnl

Flat Pnl Flat Pnl Flat Pnl Flat PnlStock Sizes Shaker Shaker Shaker Shaker

2-8 x 6-8 3-0 x 6-8 2-8 x 8-0 3-0 x 8-0

1 Panel 2 Panel 3 Panel 5 Panel**

Door Only* Door Only

LIST SIZE Net Size

Moulded Hardboard - 1 or 2 Flat Panel Shaker

$292 001-035 2-8x 6-8 x 1-3/4" 31 3/4" x 79" $526 $467

295 001-035 3-0x 6-8 x 1-3/4" 35 3/4" x 79" 529 471

424 001-035 2-8x 8-0 x 1-3/4" 31 3/4" x 95" 699 644

435 001-035 3-0x 8-0 x 1-3/4" 35 3/4" x 95" 710 655

Wood Stile & Rail w/ MDF Panel - 3 or 5 Panel**

$569 001-035 2-8 or 3-0x 6-8 x 1-3/4" 3 Panel due 12/2019 $803 $745

604 001-035 2-8 or 3-0x 6-8 x 1-3/4" 5 Panel " 838 780

601 001-035 2-8 or 3-0x 8-0 x 1-3/4" 3 Panel " 876 821

635 001-035 2-8 or 3-0x 8-0 x 1-3/4" 5 Panel** " 910 855** 8-0 5PNL has 6 panels.

* Door only price includes machining for standard hingesand is labeled with WH metal label applied.

PrimedFrame

Clear FirFrame

20 Min. Unit Price

31 3/4" / 35 3/4" x 79"

31 3/4" / 35 3/4" x 95"

Moulded Hardbaord Wood Stile & Railwith MDF Flat Panel

Moulded Hardboard Wood / MDF Panel

Single Units


of 306 9/28/20



Short and Cut-Down door / door units

ABCD

6-8 high doors.

6 PNL Smoth or Textured

2PNL ARCH Smooth or Textured

2PNL ROMAN or PLANK

2PNL Square Smooth

4 PNL ARCH Textured

4 PNL Smooth or Textured 5 PNL Smooth

A 40-1/2" to 47-1/2" 47" to 51-3/4" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 40-1/2" to 47-1/2" 43" to 46-7/8"

B 28-1/4" to 39-1/2" 24" to 32-3/4" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 30" to 36-7/8"

C 59-1/4" to 67-1/2" na na na na na 44" to 50-7/8"

D na na na na na na 58" to 64-7/8"

8-0 high doors1001

1001

100110011001

10011001

6 PNL Smoth or Textured

2PNL ARCH Smooth

2PNL ROMAN or PLANK 4 PNL Smooth 2PNL Square

Smooth

A 55-1/4" to 63-1/2" 61" to 67-1/2" 55-1/4" to 63-1/2" 55-1/4" to 63-1/2" 55-1/4" to 63-1/2"

B 28-1/4" to 39-1/2" 24" to 32-3/4" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2" 28-1/4" to 39-1/2"

C 72-1/4" to 80"

* Minimum height allows for a2" rail face above and below

panels.

Use 8' door pricing when an 8' door is needed for short unit.

Due to the panel designs and sizes, moulded panel doors can only be sized in height to fit the various panel sizes and locations. A door cannot be cut and finished through a panel. All cuts are made at the rails with enough of the rail to form a border. Please use the guidelines below when ordering short doors.

Min. and Max. available from top of door through the lock rail*Min. and Max. available from bottom of door through the lock rail*Min. and Max. available from bottom of door through the intermediate rail*

Min. and Max. available from bottom of door through the intermediate rail*


of 306 9/28/20



This page blank for future use


of 306 9/28/20


Section 4 A Page 1Effective: Sept.21, 2020

INTERIOR FRAMESCASED OPENINGS

SPECIFICATIONS:

Product Code 21-51- 21-70-

Size LIST PRICE LIST PRICE2-0 x 6-8 $153.72 $108.682-8 x 6-8 153.72 108.683-0 x 6-8 153.72 108.684-0 x 6-8 175.64 121.595-0 x 6-8 175.64 121.596-0 x 6-8 175.64 121.598-0 x 6-8 213.38 145.15

3-0 x 8-0 222.89 147.556-0 x 8-0 219.62 155.118-0 x 8-0 241.61 160.78

INTERIOR TRANSOM FRAMES (OPEN)

SPECIFICATIONS

Up to 3-0 w x 2-0 h $113.09 $88.61Up to 6-0 w x 2-0 h 157.82 117.87

Options: for cased openings and interior transom frames Fir PrimedList Price List Price

ALL Rip down jambs from stock size listed ADD: 20.00 20.00For Jambs 5-1/4" on 6'8" (Fir & Primed) ADD: 38.00 36.00For Jambs 6-9/16"" on 6'8" (Fir &Primed ADD: 37.00 52.00For jambs 8-7/8" (Primed) ADD: na 58.00

3-1/4" C-11 Casing ADD: 36.00 25.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 37.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped loose) ADD: na 94.003-1/2" RB-3 Casing (Primed) ADD: na 94.003-1/4" C-24 Casing (Primed) ADD: na 79.004" C-12 Casing (Primed) ADD: na 63.00

CLEARFIR PRIMED

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. Set Up.

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. With stops for sash or glass. Installed on interior door unit or cased opening. Add a sash from section 4-B if needed.


of 306 9/28/20





BIFOLD DOORS AND UNITS

Top track and bottom brackets installed in frame. Doors shipped in cartons. Options: List Price List PriceALL Rip down jambs from stock size listed ADD: 20.00 20.00For Jambs 5-1/4" on 6'8" ADD: 38.00 36.00For Jambs 6-9/16"" on 6'8" ADD: 37.00 52.00For adjustable (split) jambs on 6'8" ADD: na naFor jambs 8-7/8" on 8'0" ADD: na 58.003-1/4" C-11 Casing ADD: 36.00 25.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 37.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped l ADD: na 94.003-1/2" RB-3 Casing ADD: na 94.003-1/4" C-24 Csg (primed) ADD: na 79.004" C-12 Casing (primed) ADD: na 63.00

Complete UnitList Price Size List Price List Price

RAISED PANEL PINE 6'8" high 1-1/8"stiles may have 1 fingerjoint

$302 004-121 2-0 2DR $473 $428

338 004-121 2-6 2DR 509 464

376 004-121 2-8 2DR 547 502

376 004-121 3-0 2DR 547 502

532 004-121 4-0 4DR 731 677

601 004-121 5-0 4DR 799 745

671 004-121 6-0 4DR 870 816

LOUVER/LOUVER PINE 6'8" high 1-1/8"stiles may have 1 fingerjoint

$262 004-121 2-0 2DR $433 $388

287 004-121 2-6 2DR 458 413

318 004-121 2-8 2DR 489 444

310 004-121 3-0 2DR 482 437

452 004-121 * 4-0 4DR 651 597

501 004-121 * 5-0 4DR 700 646

545 004-121 * 6-0 4DR 743 689

Doors Only

CLEARFIR PRIMED


of 306 9/28/20








Doors Only

CLEARFIR PRIMED

COLONIST -Textured Six Panel 6'8" high 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418

COLONIST - Smooth Six Panel 6'8" hig ack / #1 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418

with #100


of 306 9/28/20








Doors Only

CLEARFIR PRIMED

SANTE FE - Smooth Two Panel Plank 6'8" high 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $313 $268

127 004-035 2-6 2DR 313 268

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418

ROCKPORT - Smooth 5 Panel 6'8" high 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0with #100 track/#11 472 418


of 306 9/28/20








Doors Only

CLEARFIR PRIMED

COVENTRY - Smooth Four Panel 6'8" high 1-3/8"Can be used with 2 or 4 Panel Square doors moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418

CAIMAN -Smooth Two Panel Roman Top 6'8" 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418


of 306 9/28/20








Doors Only

CLEARFIR PRIMED

CAMDEN - Textured Two Panel Arch 6'8" high 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 431 377

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 472 418

PRINCETON -Smooth Two Panel Arch 6'8" high 1-3/8"moulded panels both sides

$116 004-035 2-0 2DR $287 $242

127 004-035 2-6 2DR 299 254

142 004-035 2-8 2DR 313 268

142 004-035 3-0 2DR 313 268

232 004-035 4-0 4DR 404 358

252 004-035 5-0 4DR 451 397

273 004-035 6-0 4DR 444 399


of 306 9/28/20








Doors Only

CLEARFIR PRIMED

FLUSH LAUAN 6'8" high 1-3/8"

$110 004-007 2-0 2DR $281 $236

120 004-007 2-6 2DR 292 247

126 004-007 2-8 2DR 297 252

126 004-007 3-0 2DR 297 252

220 004-007 4-0 4DR 418 364

241 004-007 5-0 4DR 440 386

260 004-007 6-0 4DR 459 405

FLUSH BIRCH 6'8" high 1-3/8" Lauan Back

$158 004-005 2-0 2DR $329 $284

167 004-005 2-6 2DR 338 293

178 004-005 2-8 2DR 349 304

178 004-005 3-0 2DR 349 304

298 004-005 4-0 4DR 497 443

316 004-005 5-0 4DR 514 460

333 004-005 6-0 4DR 532 478


of 306 9/28/20





BYPASS DOOR UNITS

SPECIFICATIONS:

ADD two 1-3/8" doors to complete unit.

3-11 x 6-8 2- 2-0 doors 188.69$ $147.554-11 x 6-8 2- 2-6 doors 196.25 155.115-11 x 6-8 2- 3-0 doors 199.11 157.97

INTERIOR POCKET SPLIT CASED OPENINGSPECIFICATIONS

2-0 - 3-0 x 6-8 171.27$ $126.22

Options: List Price List PriceRip down jambs under 4-5/8" ADD: $20.00 $20.00For Jambs To 5-1/4" on 6'8" ADD: 38.00 36.00For Jambs To 6-9/16"" on 6'8" ADD: 37.00 52.00For jambs to 8-7/8" ADD: na 56.00

3-1/4" C-11 Casing ADD: 36.00 25.001X4 S4S 11/16" x 3-1/2" Casing -Primed ADD: na 37.001X6 S4S 11/16" x 3-1/2" Casing -Primed (shipped loose) ADD: na 94.003-1/2" RB-3 Casing ADD: na 94.003-1/4" C-24 Csg (primed) ADD: na 79.004" C-12 Casing (primed) ADD: na 63.00

One Piece 4-5/8" flat jamb. 2-1/4" WM 356 casing. Johnsto # 2222 by-pass header with track and hardware. Finished opening width = 2 x door width less 3/4".

For a complete unit ADD 1-3/8" Door, Johnson Pocket frame (on next page ), and this cased opening.

One Piece 4-5/8" flat jamb - with split head and side jamb. 2-1/4" WM 356 casing. Finished opening width = net door size.

PRIMEDCLEARFIR


of 306 9/28/20





HARDWARE - POCKET DOOR, BY-PASS, & BIFOLDJohnson Set Up Pocket Door Frame for 1-3/8" doors

2711 LIST PRICE

2711 Frame for 6'8" doors Rough Opening :with #111 track / #1020 hangers Width = 2 x door width, + 1-3/4"

for 1-3/8" doors to 80 lbs. Height = 84-1/2"

Size 2-0 x 6-8 131.58$ 061-015

2-4 x 6-8 137.15 061-015

2-6 x 6-8 140.40 061-015

2-8 x 6-8 145.97 061-015

3-0 x 6-8 149.37 061-015

2710 2710 Frame for 8'0" doors Rough Opening :

with #100 track/#1120 hangers* Width = 2 x door width, + 1-3/4"

for 1-3/8" doors to 125 lbs. Height = 100-1/2"

2-0 x 8-0 195.87$ 061-015

2-4 x 8-0 206.39 061-015

2-6 x 8-0 210.92 061-015

2-8 x 8-0 222.26 061-015

3-0 x 8-0 226.20 061-015

* Optional #1125 Ball Bearing hangers for doors to 200#'s are available as a separate item. See next page.

Johnson 1500 Universal Heavy Duty KD Frame - ctn pack1500 6-8" #100 track and 1120 hangers Width = 2 x door width, + 1"

for 1-3/8" doors to 125 lbs.* 6-8 Height = 84-1/2"

1530 8-0" #100 track and 1125 Ball Bearing 8-0 Height = 100-1/2" hangers for 1-3/8" doors to 200 lbs. List Price Product Code

1500 2-0 - 3-0 x 6-8 136.08$ 061-015

1530 2-0 - 3-0 x 8-0 188.12 061-015

* Optional #1125 Ball Bearing hangers for doors to 200#'s are available as a separate item. See next page.

carton packed

Rough Opening =


of 306 9/28/20





HARDWARE - POCKET DOOR, BY-PASS, & BIFOLD

Pocket Door Hardware Accessories

1060 Soft-Close/Open Hardware 88.05$

Miscellaneous Pocket Door Hardware Accessories

2511 PPK-1 20.25$ 061-015hangers, guides for 111 track

1500 PPK3 25.13 061-015 frames. 2 ea tri-roller hangers, guides for 100 track.

1125PPK 15.38 061-015 to 200#'s. Single tri-roller hanger for #100 track

1555 PPK3 10.28 061-015units. Track bracket with 2 door stops

150 -3PK1 7.69 061-015

1505 PPK 3 4.31 061-015

1575 PPK-3 8.59 061-015

Can be used with our stock 2710 8'0" setup frames or the 1500 6'8" and 8'0" KD frames that use the Series 100 track.

The 1060 Soft-Close Kit contains a single soft-close actuator only. For single direction soft door operation, the 1060 must be used in combination with a 1125 Door Hanger. For bi-directional soft door operation 2 1060's are required. Soft-Close kits can be used to convert current 100 Series installations to soft-close operation.

Kit for 2711 6'8" frame. 2 ea tri-roller

Pocket Guides & Bumper

Adaptor for 1-3/4" doors on #1500

Pocket door Edge Pull. For use with converging doors.

Kit for 2710 8'0", 1500, and 1530

Ball bearing Hanger pack for doors to

Converging Kit - for double pocket


of 306 9/28/20





Miscellaneous Bifold and Bypass Hardware

LIST PRICEJOHNSON SERIES 1700 Bifold HardwareComplete bifolding door hardware set for 1-1/8" to 1-3/8" doors

Shrink wrapped package1700 - 48" -2 or 4 door 51.91$ 061-0121700 - 60" -2 or 4 door 54.25 061-0121700 - 72" -2 or 4 door 57.37 061-012

JOHNSON SERIES 111FD Bifold HardwareHeavy duty bifold hardware sets. Shrink wrapped package

111 -72" -2 or 4 door 91.88$ 061-012111 -96" -2 or 4 door 106.20 061-012

BIFOLD HINGES1823PPK3 6.03$ 061-012

JOHNSON SERIES 2200 Bypass HardwareShrink wrapped package

2200 -48" -2 door $29.25 061-0122200 -60" -2 door 33.35 061-0122200 -72" -2 door 37.48 061-012

Bypass Hardware Pack 2200PK xtra set - Rollers, pulls, screws $8.97 061-012

Replacement Hardware for stock carton pack bifoldsStanley (Hdwe used on stock & set up bifolds)

BF 30-01-362 36" Track only $6.65 061-015

BF 30-01-48 48" Track only 8.60 061-015

BF 30-01-60 60" Track only 10.30 061-015

BF 30-01-72 72" Track only 11.80 061-015

BF 30-81- Jamb Bracket w/screws 1.45 061-0152454-1 2 door bag hardware no track 14.25 061-015


of 306 9/28/20





blank


of 306 9/28/20



504-733-8500 / [email protected]:// NewOrleans.DykeDoors.com

Section 4-B Page 1Effective: September 21, 2020

EXTERIOR FRAMES


of 306 9/28/20





EXTERIOR FRAMES

* Doors used in units are pre-fit 1/4" in width and 1" in height when installed in frames. Most Wood Doors are stocked prefit in width and height.Door Size Actual net width (after pre-fitting)

2-0 23-3/4" 2-6 29-3/4" 2-8 31-3/4" 3-0

Wood Door and Exterior Frame Specifications

Hinge locations

are from top of door to

top of hinge.

Deadbolt bore: 2-1/8" at 5-1/2" o/c above standard.

35-3/4"

Boring SpecificationsStandard bore: 2-1/8" lock bore at 2-3/8" backset.

All Doors supplied by Dyke Industries are made by the leading manufacturers with the highest quality materials. Doors must be finished on all six sides immediately on

delivery. Failure to do so can affect the performance of the door and may void manufacturer's warranty.


of 306 9/28/20





EXTERIOR FRAMES

Height 6-8 81-11/16" 82-15/16" 82"

6-8 with 12" Transom 95-3/16" 96-7/16"

5-4 (pr 2-8) 65 7/8 68-1/2" 66-1/2" 6-0 (pr 3-0)

34"

26" 2-6 31-7/16 34" 32"

73-7/8 76-1/2" 74-1/2"

4-0 (pr 2-0) 49-7/8 52-1/2" 50-1/2" 5-0 (pr 2-6) 61-7/8 64-1/2" 62-1/2"

25-7/16 " 28" 2-0

Nominal Door Actual Unit Width Actual Unit Width Rough Opening


65"

2-8 33-7/16 36" 3-0

Add 1/2" for Open Out

1-0 / 3-0 / 1-0 64-7/16 67"1-2 / 3-0 / 1-2 68-7/16 71" 69"

95-1/2"

Height (Outside Frame) (Outside Brickmould)

Open out units with bumper sills are 5/8" shorter in frame and brick mould height than open in units. The brick outside mould width is 1/2" wider.

Door Size Actual Unit Height Actual Unit Height Rough Opening

8-0 97-11/16" 98-15/16" 98"

Width Outside Frame " (Outside Brickmould) Width

37-7/16 40" 38"


of 306 9/28/20





EXTERIOR FRAMES

See Section 4C page 10 for FrameSaver information.

See Section 4C page 13 for PLASTPRO PF information.


Door Units with Primed Frames listed in this price book are priced using the FrameSaver frame.

Why Buy a FrameSaver® Door Frame?

An upgrade to the All Composite PlastPro PF frame is available on Most of our Exterior Frames


of 306 9/28/20





EXTERIOR FRAMES

Set-Up Exterior Frames with Weatherstrip and sillstock heights page(s)

Clear Fir Frames 6-8 & 8-0 6 & 7

FRAME SAVER Primed Frames 6-8 & 8-0 8 & 9

PlastPro PRIMED Composite PF Frames 6-8 & 8-0 10 & 11

PlastPro TEXTURED Composite PF Frames 6-8 & 8-0 12 & 13

Mahogany Frames 6-8 & 8-0 14 & 15

Primed Frames 6-8 16

Set-Up Exterior Frames No Weatherstrip , No Sill

No Kerf Clear Fir Frames 6-8 & 8-0 17

No Kerf Primed Frames 6-8 & 8-0 18

19 - 22

23

24 - 26

Fiberglass and Steel Doors are priced with Frames in Section 4C.

Exterior Options

Miscellaneous Trim Options

Transoms and Transom Frames

For a complete unit, use the frame prices from this section and add Wood Doors from Section 5, or other Special Order doors.


of 306 9/28/20





EXTERIOR FRAMES

OPTIONS: Single UnitsADD $10

Adjustable, screw type, mill sill ADD 20Adjustable, screw type, Bronze sill ADD 31Articulating ZAC mill sill ADD 20Articulating ZAC Bronze sill ADD 34Open out with bumper sill and NRP hinge ADD 23Open out with bumper Bronze sill and NRP hinge ADD 34Premiun hinges ADD 4

Fir Frames 6'8" highWith Sill & Weatherstrip List Price

4-9/16" Jambs 245$ 5-1/4" " 288 6-9/16" " 337 7-1/4" " (6-8 only) 374

4-9/16" Jambs 558$ 5-1/4" " 612 6-9/16" " 674 7-1/4" " (6-8 only) 721

4-9/16" Jambs 801$ 5-1/4" " 920 6-9/16" " 1,031 7-1/4" " (6-8 only) 1,148

4-9/16" Jambs 994$ 5-1/4" " 1,181 6-9/16" " 1,308 7-1/4" " (6-8 only) 1,445

4-9/16" Jambs 751$ 5-1/4" " 874 6-9/16" " 951 7-1/4" " (6-8 only) 1,018

Add Door(s), Sidelites(s), and Transom Sash to complete unit.

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADDFor no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Astragal ADD

Dbl Units$103961

40

861 152

39

For other options see bottom of each page and "OPTIONS" page in this section. All prices are LIST.

61 19

Solid Fir Trim Options 6'8" & 8'0" Dbls/Sdlt $48 $5422 2648 11122 83

Single

Double Sidelite Unit with Transom Frame up to 2'0" high

Double Unit with Transom Frame up to 2'0" high

3657

30

Specifications: Wood Door Unit Frames -Rabbeted jambs with kerf for weatherstrip. Q-Lon compression weatherstrip applied. 1-1/4" x 2" WM 180 (All Purpose) Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair 2D (brasstone) 4 x 4 hinges.

Double Units with T-astragal with head and foot bolts*.

132

Sidelite Unit$10

includedDouble Bore

4

Double Unit 4-0 - 6-0

Double Sidelite Unit up to 1-4 / 3-0 / 1-4

61 39

Single Unit 2-0 - 3-0

Fir Frames are priced with Fir Astragal


of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

Fir Frames 8'0" highWith Sill & Weatherstrip List Price

Up to 5-1/4" Jambs 347$ 6-9/16" Jambs 429

Up to 5-1/4" Jambs 725$ 6-9/16" Jambs 742

Up to 5-1/4" Jambs 1,075$ 6-9/16" Jambs 1,302

Up to 5-1/4" Jambs 1,337$ 6-9/16" Jambs 1,578

Up to 5-1/4" Jambs 987$ Up to 6-9/16" Jambs 1,019

Add Door(s), Sidelites(s), and Transom Sash to complete unit.* Elliptical, Segment, and Half Round Transom Units are available by special order

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADDFor no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Astragal ADD

$54$48

11122

22

Single

36

Dbls/Sdlt

26

8348

Solid Fir Trim Options 8'0"

30






35

Fir Frames are priced with Fir Astragal


of 306 9/28/20



https://s3.us-east-2.amazonaws.com/dyke-site-assets/resources/uploads/35%20New%20Orleans/RDS%20Brochure%202019.pdf



EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

With Sill & Weatherstrip List Price

4-9/16" Jambs 199$ 5-1/4" " 237 6-9/16" " 255 Up to 8-7/8" one piece 359

4-9/16" Jambs 418$ 5-1/4" " 472 6-9/16" " 491 8-7/8" one piece 630

4-9/16" Jambs 684$ 5-1/4" " 788 6-9/16" " 806 8-7/8" one piece 972

4-9/16" Jambs 837$ 5-1/4" " 970 6-9/16" " 1,003 8-7/8" one piece 1,183

4-9/16" Jambs 570$ 5-1/4" " 654 6-9/16" " 688 8-7/8" one piece 842

Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

ForAll Composite Brick Mold ADD5/4 x 4 FrmSver Casing in lieu of Brick Mould ADD1 x 4 PVC Casing in lieu of Brick mould ADD5/4 x 4 Outside Casing with Brick Mould ADD1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT

Single FRAMESAVER Trim Options 6'8" & 8'0"


92 110112

18 22



FRAME SAVER Primed with composite bottom 6'8" high



94

Dbls/Sdlt $20 $2457 6856 68

Frame Saver Frames are priced with White Aluminum Ultra Slide

Bolt Astragal


of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

With Sill & Weatherstrip List Price

4-9/16" Jambs 243$ 5-1/4" Jambs 315 6-9/16" Jambs 334 8-7/8" one piece 480

4-9/16" Jambs 506$ 5-1/4" Jambs 609 6-9/16" Jambs 635 8-7/8" one piece 844

4-9/16" Jambs 837$ 5-1/4" Jambs 1,037 6-9/16" Jambs 1,082 8-7/8" one piece 1,443

4-9/16" Jambs 989$ 5-1/4" Jambs 1,219 6-9/16" Jambs 1,279 8-7/8" one piece 1,655

4-9/16" Jambs 659$ 5-1/4" Jambs 791 6-9/16" Jambs 832 8-7/8" one piece 1,056


ForAll Composite Brick Mold ADD5/4 x 4 FrmSver Casing in lieu of Brick Mould ADD1 x 4 PVC Casing in lieu of Brick mould ADD5/4 x 4 Outside Casing with Brick Mould ADD1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT

6856 68

92 11018 22

11294

$20FRAMESAVER Trim Options 6'8" & 8'0"

57


Double Sidelite Unit 1-4 / 3-0 / 1-4

Double Sidelite Unit with Transom Frame 2'0" high

Double Unit with Transom Frame 2'0" high

FRAME SAVER Primed with composite bottom 8'0" high

$24 Single Dbls/Sdlt


Frame Saver Frames are priced with White Aluminum Ultra Slide

Bolt Astragal


of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

PlastPro PF Frames All Composite 6'8" high Primed With Sill & Weatherstrip

4-9/16" Jambs 262$ 5-1/4" 291 6-9/16" " 311

4-9/16" Jambs 500$ 5-1/4" 537 6-9/16" " 561

4-9/16" Jambs 886$ 5-1/4" 970 6-9/16" " 996

4-9/16" Jambs 1,148$ 5-1/4" 1,299 6-9/16" " 1,325

4-9/16" Jambs 762$ 5-1/4" 866 6-9/16" " 890


1 x 4 PVC Casing in lieu of PF Brick mould ADD

1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT 20 24

34

PF Frame Trim Options 6'8"

14 17





Single Dbls/Sdlt


41

List Price

PF Frames are priced with White Aluminum

Ultra Slide Bolt Astragal


of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

PlastPro PF Frames All Composite 8'0" high Primed With Sill & Weatherstrip

4-9/16" Jambs 316$ 5-1/4" 387 6-9/16" " 403

4-9/16" Jambs 600$ 5-1/4" 709 6-9/16" " 737

4-9/16" Jambs 996$ 5-1/4" 1,173 6-9/16" " 1,208

4-9/16" Jambs 1,258$ 5-1/4" 1,502 6-9/16" " 1,537

4-9/16" Jambs 862$ 5-1/4" 1,037 6-9/16" " 1,065


1 x 4 PVC Casing in lieu of Brick mould ADD

1 x 4 PVC Casing with Brick Mould ADDFor no Casing DEDUCT






PF Frame Trim Options 8'0"

List Price

Single Dbls/Sdlt

34

14 17

20 2441




of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

PlastPro TEXTURED PF Frames All Composite Oak Grain 6'8" high Textured With Sill & Weatherstrip

4-9/16" Jambs 299$ 5-1/4" " 376 6-9/16" " 433

4-9/16" Jambs 644$ 5-1/4" " 738 6-9/16" " 812

4-9/16" Jambs 1,011$ 5-1/4" " 515 6-9/16" " 1,193

4-9/16" Jambs 1,320$ 5-1/4" " 863 6-9/16" " 1,632

4-9/16" Jambs 952$ 5-1/4" " 1,087 6-9/16" " 1,252

For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Astragal ADD 73


List PriceSingle Unit 2-0 - 3-0



TEXTURED PF Frame Trim Options 6'8" Single Dbls/Sdlt


Any ripping in width on composite frames will leave an edge that may not be suitable for finishing.

20 24




of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

PlastPro TEXTURED PF Frames All Composite Oak Grain 8'0" high Textured With Sill & Weatherstrip

4-9/16" Jambs 315$ 5-1/4" " 400 6-9/16" " 457

4-9/16" Jambs 676$ 5-1/4" " 815 6-9/16" " 889

4-9/16" Jambs 981$ 5-1/4" " 1,188 6-9/16" " 1,305

4-9/16" Jambs 1,349$ 5-1/4" " 1,546 6-9/16" " 1,805

4-9/16" Jambs 984$ 5-1/4" " 1,173 6-9/16" " 1,329

For Fir or Mahogany Veneered Ultimate Astragal ADD

List PriceSingle Unit 2-0 - 3-0





TEXTURED PF Frame Trim Options 8'0" Single Dbls/Sdlt

73

Any ripping in width on composite frames will leave an edge that may not be suitable for finishing.




of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

White Mahogany Frames 6'8" highWith Sill & Weatherstrip Product Code

4-9/16" Jambs 438$

Up to 6-9/16" Jambs 563

4-9/16" Jambs 824$

Up to 6-9/16" Jambs 961

4-9/16" Jambs 1,261$

Up to 6-9/16" Jambs 1,542

4-9/16" Jambs 1,685$

Up to 6-9/16" Jambs 2,105

4-9/16" Jambs 1,248$

Up to 6-9/16" Jambs 1,524 Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

* Elliptical, Segment, and Half Round Transom Units are available by special order

For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Astragal ADD



List Price

White Mahogany Trim Options 6'8"

60

Double Sidelite Unit with Rectangular Transom Frame up to 2'0" high



50

Single Dbls/Sdlt

57

Mahogany units are priced with

Mahogany Astragal


of 306 9/28/20





EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

White Mahogany 8'0" highWith Sill & Weatherstrip

4-9/16" Jambs 551$

Up to 6-9/16" Jambs 684

4-9/16" Jambs 975$

Up to 6-9/16" Jambs 1,165

4-9/16" Jambs 1,658$

Up to 6-9/16" Jambs 2,013

4-9/16" Jambs 2,082$

Up to 6-9/16" Jambs 2,576

4-9/16" Jambs 1,399$

Up to 6-9/16" Jambs 1,728 Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.

* Elliptical, Segment, and Half Round Transom Units are available by special order

For no Casing DEDUCTFor Fir or Mahogany Veneered Ultimate Lever Astragal ADD

List Price

64


Mahogany Trim Options 6'8" & 8'0"

54

Dbls/Sdlt

57

Mahogany units are priced with

Mahogany Astragal

Single






of 306 9/28/20



EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

With Sill & Weatherstrip

4-9/16" Jambs - only 172$ for wider jambs - use FrameSaver pricing





Add Door(s), Sidelites(s), and Transom Sash of choice for complete unit.* Elliptical, Segment, and Half Round Transom Units are available by special order

ForAll Composite Brick Mold ADD5/4 x 4 primed Casing in lieu of Brick Mould ADD1 x 4 primed Casing in lieu of Brick mould ADD5/4 x 4 primed Casing with Brick Mould ADD1 x 4 primed Casing with Brick Mould ADDFor no Casing DEDUCT

94

62 7549 5978

PRIMED Paint Grade (not FrameSaver) 6'8" highList Price

Primed Fingerjoint Trim Options 6'8"

19

$25 $31

78

Single Dbls/Sdlt


6516





Primed units are priced with Fir

Astragal


of 306 9/28/20



EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39

No Sill / No weatherstrip

4-9/16" Jambs 222$ Up to 6-9/16" Jambs 314

4-9/16" Jambs with wood Astragal, no H&F bolts 452$ Up to 6-9/16" Jambs " 568


4-9/16" Jambs 323$ 5-1/4" Jambs 405 6-9/16" Jambs 437

4-9/16" Jambs with wood Astragal, 618$ 5-1/4" Jambs " 636 6-9/16" Jambs 676

Add Door(s) to complete unit.

5/4 x 4 Outside Casing in lieu of WM180 ADD1 x 4 Outside Casing in lieu of WM180 ADD5/4 x 4 Outside Casing with WM180 ADD1 x 4 Outside Casing with WM180 ADD

For no Casing DEDUCT

Solid Fir Trim Options 6'8" & 8'0"26

List Price

30 36

48 11122 83

22

Dbls/Sdlt Single





$48 $54

List Price

Fir units are priced with Fir Astragal

Fir units are priced with Fir Astragal

No Kerf Fir Frames 6'8" high

No Kerf CLEAR FIR Frames 8'0" high


of 306 9/28/20



EXTERIOR FRAMES



Dbl Units$103961

40

861 152

39


61 19



132

Sidelite Unit$10

includedDouble Bore

4

61 39


4-9/16" Jambs 1575-1/4" " 1956-9/16" " 213

For frames with weatherstrip and sill use primed FrameSaver

4-9/16" Jambs with wood Astragal, no H&F bolts 3435-1/4" " " 3976-9/16" " " 416


4-9/16" Jambs 2095-1/4" Jambs 2816-9/16" " 306

4-9/16" Jambs with wood Astragal, no H&F bolts 4485-1/4" Jambs " 5516-9/16" Jambs " 595

Add Door(s) to complete unit.

ForAll Composite Brick Mold ADD5/4 x 4 primed Casing in lieu of Brick Mould ADD1 x 4 primed Casing in lieu of Brick mould ADD5/4 x 4 primed Casing with Brick Mould ADD1 x 4 primed Casing with Brick Mould ADDFor no Casing DEDUCT

78



Primed Fingerjoint Trim Options 6'8"

49

16 19

Single Dbls/Sdlt $25 $3162 75

5994

65 78


No Kerf PRIMED Paint Grade Frames 6'8" high

No Kerf PRIMED Paint Grade Frames 8'0" high No Sill / No weatherstrip



Astragal


Astragal


of 306 9/28/20



EXTERIOR FRAMES

SILL Options Single Double SidelightTo LIST Price **

Screw Type Adjustable Sill, Mill ADD $12 $22 includedScrew Type Adjustable Sill, Bronze ADD 20 39 20ZAC Self Adjusting Sill, Mill ADD 20 41 19ZAC Self Adjusting Sill Bronze ADD 31 61 39RDS -Replaceable Deck Sill Mill - for 4-5/8" *** ADD 25 55 42RDS -Replaceable Deck Sill Bronze- for 4-5/8" ** ADD 44 87 74RDS -Replaceable Deck Sill Mill - for 6-5/8" *** ADD 40 77 80RDS -Replaceable Deck Sill Bronze- for 6-5/8" ** ADD 56 109 117Open out Bumper Sill, Mill ADD 23 40 132Open out Bumper Sill, Bronze ADD 34 61 152RDS -Replaceable Deck- Open out Bumper Sill, M ADD 39 74 166RDS -Replaceable Deck- Open out Bumper Sill, M ADD 50 95 1861/2"ADA Sill, Mill (In or Out) ADD 13 16 45 1/2" ADA Sill, Bronze (In or Out) ADD 50 79 124For no Sill DEDUCT -8 -15 na ** for sidelight units up to 1-2/3-0/1-2. (for larger sidelights see MISCELLANEOUS OPTIONS) *** New - RDS - Replaceable Deck Sills - *** Note: The RDS sill does not use extenders for wide jambs. Use the 6 5/8" option for 6" - 7" jambs .

ZFI 56 Standard Fixed Sill ZOB 56 Open Out Bumper Sill

ZAI 56 Screw Type adjustable sill ZOB 56 RDS Open Out RDS Bumper Sill

ZAC 56 ZAC Articulating Sill ZHCI 56 Open In ADA

ZAI 56 RDS RDS - Replaceable Deck Sill ZHCO 56 Open Out ADAOptions continued on next page

OPTIONS


of 306 9/28/20



EXTERIOR FRAMESOPTIONS

HARDWARE and MISCELLANEOUS Single Double SidelightTo LIST Price

Deadbolt Bore ADD $10 $10 $10Viewer Bore ADD 24 24 24Non-removable-pin Hinge, 2D Brasstone 6 10 6Premium Hinges ( standard is brasstone) ADD 4 8 8 ( Bright Brass, Dull Chrome, Antique Nickel,Satin Nickel, Antique Brass, or Colonial Bronze )

4" x 4" Stainless Steel Hinges ADD 25 504" x 4" SPRING hinges (2 per door) ADD 32 ( SN -Satin Nickel, CB -Bronze, DC -Dull Chrome)

Premium finish NRP hinges - Special Order - ADD 20 40 20Ball Bearing Hinges in 15 or 11P ADD 33 66 33Mortised Head & Foot Bolts ADD included

Cut Down Door -in Height * Wood Doors ADD 130 260 310Cut Down Door -in Width * Wood Doors ADD 130 260 na * Doors cut down in height or width may void manufacturer's warranty. Some limitations may apply.

Door only - Bore and hinge mortise (Dyke standard specs) 46Door only - Bore and apply standard hinges 60Special bore and hinge placement - Set-up charge 110For spread mull on sidelight units, up to 4" ADD per mull $108

(standard mull is 1-1/2")

For Single Frames up to 4-0 wide (after options) ADD 80Continuous Head and Sill on Triple or Quad units up to 12', that are greater than 1/-2/3-0/1-2 units. After all sill and frame options are applied. ADD $202

Some limitations and restrictions apply.

Rip Charge - to cut down any stock exterior jamb to a specified widthADD $25 $25 $40

Options for Exterior Frames continue on next page


of 306 9/28/20




Astragal Options- 1, 2, or 3 - for Fir or Mahogany Units

Slide Bolt Wood Veneer Ultimate Aluminum Astragal 6'8" 8'0"For Flip Lever Astragal Bronze ADD -$149 -$149For Ultimate Slide Bolt Astragal, Fir or Mahogany Veneer ADD $73 $73

Multipoint Astragal For Multipoint Astragal Fir or Mahogany Veneer ADD $374 $374

Trilennium 3000 Multi-Point Lock - For Double UnitTo Fir or Mahogany Door Unit of Choice ADD: 6'8" 8'0"

Series 3000 - Stainless Steel installed with

Compatible Fir/Mahogany Veneer Astragal ADD $880 $978

Series 3000 - Victorian Bronze installed with

Compatible Fir/Mahogany Veneer Astragal ADD $866 $965includes construction handle

Trilennium 3000 Multi-Point Lock - For Single UnitTo Fir or Mahogany Door Unit of Choice ADD:

Series 3000 - Stainless Steel ADD $622 $704Series 3000 - Victorian Bronze ADD 609 692

Options for Exterior Frames continue on next page

The interior and exterior trim, as well as matching strike plates, are sold seperately, and ships in a separate carton to

be installed, by others, at the end of construction.

3-Point AstragalWood Veneer on Bronze

Aluminum

See Section 13 for these options,


of 306 9/28/20




4-9/16" x 40" w/ 2 end caps $55.944-9/16" x 80" w/ 2 end caps 106.816-9/16" x 40" w/ 2 end caps 77.876-9/16" x 80" w/ 2 end caps 147.50

Tite Seal Self-Adhesive Foam Threshold Sealer per roll / pack

TSFM42F 5.5" x 3.5' Flat 12/ctn $13.85 ea piece

TSFM65 5.5" x 6.5' Roll 12/ctn 20.65 ea roll

See other SureSeal Flashing products in section 10.

SureSill - For added protection against water infiltration


of 306 9/28/20



EXTERIOR FRAMESMISCELLANEOUS EXTERIOR FRAME TRIM

CORNER BLOCKS & PLINTH BLOCKS

LIST1" x 4" Fluted / Beaded Ext 1 - Primed

3-0 x 6-8 per side not applied $746-0 x 6-8 per side " 906-0 x 8-0 per side " 117

Pine Corner and Plinths Blocks1-1/8" x 4-1/4" x 4-1/4" Bullseye Corner Block ea. not applied $171-1/8" x 4-1/4" x 7-1/2" Plinth Block ea. " 22

1" x 5-1/2" Fluted Ext 2 - Primed3-0 x 6-8 per side not applied $1156-0 x 6-8 per side " 1406-0 x 8-0 per side " 175

Pine Corner and Plinths Blocks1-1/8" x 5-1/2" x 5-1/2" Bullseye Corner Block ea. not applied $171-1/8" x 5-1/2" x 8" Plinth Block ea. " 22

Corner blocks, plinth blocks, and sides of flutted trim are sold in sets, not applied to frames.


of 306 9/28/20



EXTERIOR FRAMES

1-3/8" Insulated 1-Light Transoms 082-011

SIZE LIGHT 2-0 x 1-0 24 x 12 1

2-4 x 1-0 28 x 12 1

2-6 x 1-0 30 x 12 1

2-8 x 1-0 32 x 12 13-0 x 1-0 36 x 12 1

4-0 x 1-0 48 3/4 x 12 1

5-0 x 1-0 60 3/4 x 12 1

5-3 x 1-0 62 7/8 x 12 1

5-4 x 1-0 64 3/4 x 12 1

5-7 x 1-0 66 7/8 x 12 1

6-0 x 1-0 72 3/4 x 12 1

Add 7/8" SDL bars to sash above. ADD per Light : $20

Common sizes listed below.

Light 2-0 x 1-0 24x12 2

2-8 x 1-0 32x12 22-8 x 1-0 32x12 3

3-0 x 1-0 36x12 2

3-0 x 1-0 36x12 3

5-0 x 1-0 60x12 4

5-0 x 1-0 60x12 26-0 x 1-0 72x12 6

SIZE

333 485

1-3/8" Insulated - with SDL - Divided Light Transoms with 7/8" SDL bar applied

180Price

250 351

243

270 371

344263

TRANSOM SASH AND TRANSOM SASH UNITS

304

Price

175175

Complete Unit

140

203

Rectangular Transom Sash and UnitsSpecifications: Wood Transom Units -PRIMED Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom

mull. Sash installed. Unit installed on door unit.

Rough Opening height for Door Unit with Transom:

ADD: Transom frame height (13-1/2") to

door unit rough opening.

One light or Divided light with SDL bars

364

333368

485521528375

281Price

Sash Only Complete Unit

333

Sash Only

241Price

276276

311399481

267210

488 641

413 561373 525


of 306 9/28/20



EXTERIOR FRAMES

up to:2-8x2-0 $126 $101 $162 $206 $2623-0x2-0 126 101 162 206 2624-0x2-0 168 132 220 270 3605-0x2-0 188 148 246 297 4085-4x2-0 192 151 260 308 421

OPTIONS: 6-0x2-0 193 152 262 308 424 For Jambs up to 6-9/16" ADD $84 $45 $67 $131 $139

For other options see page 19 in this section. All Prices are LIST.

Add Glass price to Open Transom Frames aboveper Square Foot -LIST

3/16" Single Glass per Sqr. Foot $21Clear Isul Glass per Sqr. Foot 36Low E Insul Glass per Sqr. Foot 46

Example: Clear insulated glass for a 3'6" x 1'8" transom frame :

42 20 840 sq in

144 5.8 sq ftRounded up to 6 sq ft $36 $216

SDL (simulated divided lights) are available for transoms

Add Sash price to Open Transom Frames above

Wood transom sash with: per Square Foot -LIST1/8" Single Glass $61 $75Clear Isulated Glass 68 78Low E Insul Glass 92 105

Example: Glazed Transom Sash with insulated glass for a 3'0" x 1'2" transom frame :

36 14 504 sq in

144 3.5 sq ftRounded up to 4 sq ft $68 $272

Clear FirPF

PRIMED Composite

To price glass: take width x height (inches), and divide by 144 = Square feet of glass needed.

Round that up to next whole number. Multiply by glass square foot price.

Special Size Glazed Transom Sash - for Open Transom Frames

Direct Set Glass - for Open Transom Frames

Add to open transom frame

Mahogany

Rectangular Transom Frames - open

Primed / FRM SVR

PF TEXTURED Composite

Specifications: Wood Transom Unit Frames -Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Stops furnished for transom sash.

Fir, Stain Grade Sash

per Square Foot -LIST

Open Frames

Add to open transom frame

above

To price glazed transom sash: width x height (inches), and divide by 144 = Square

feet of sash needed. Round that up to next whole number. Multiply

by Transom Sash square foot price.

Paint Grade Sash


of 306 9/28/20



EXTERIOR FRAMES

5' 4" Direct Glazed - 4 Lt -Spoke - For 1-0/3-0/1-0 Unit 1,790$ 082-040O/S jamb to O/S jamb = 64-1/2" x 25-1/2"

4 9/16 " FJ Jambs - Primed WM180 Casing- Set 3-1/4" inside casing 502$

082-040

5' 0" Direct Glazed - 4 Light - For 5-0 (dbl 2-6) Uint $1,810O/S jamb to O/S jamb = 62" x 16-1/2"

4 9/16 " Paint Grade or Clear Fir WM180 Casing- Primed Sill NosingSet 3-1/4" inside casing 502$

$2,430

$691

A variety of transom designs and sizes are available by Special Order. Please send in your design and details for a quote.

SPECIAL ORDER TRANSOMS

Paint Grade Stain Grade Fir

Paint Grade

SEGMENT, ELLIPTICAL, & HALF CIRCLE TRANSOMS

SEGMENT TRANSOM UNIT


of 306 9/28/20


Section 4-C Page 1Effective: Sept. 21, 2020

STEEL and FIBERGLASS DOOR UNITS

SECTION 4 C


Door and Frame SpecificationsPages

Door Specifications & Finishing Instructions 2 - 9

FRAME SAVER information 10 - 12

PF - PlastPro Composite FRAME information 13 - 14

Unit / Frame Specifications and Rough Openings 15 - 16

STEEL & FIBERGLASS Door Unit Pricing 18 - 48

Standard SideLights 49

Unit Options - Jambs, Casing, & Sills 50 - 51

Hardware & Miscellaneous options 52

Trilennium Multi-Point Lock options 53

20 Minute Door options 53

SDL - Simulated Divided Light 55

SureSill sill pans & Tite Seal threshold sealers 56

Transom Options 57 - 59

Trimmable FiberGlass Doors 60

Fiberglass Patio Doors 61

Decorative Glass Units 62


of 306 9/28/20






Steel DoorsHigh Definition Steel Entry Doors

Varying designs are available in smooth surfaces

Striking, high-definition panel design

Closed-cell polystyrene core maintains U-factor and will not hold moisture (2)

12" lock-block provides hardware reinforcement (4)

Galvanized, 24 gauge primed steel skin (1)

LVL stiles and top rail with proud edge (3)

10 year limited warranty

* 24 gauge galvanized steel

facings, LVL stiles and top rail with

proud edge, and rot resistant composite

bottom rail.


of 306 9/28/20






Manufacturer's Warranty - Steel Doors LVL Wood-Edge Steel Door WarrantySteel Doors 10 YearsSteves & Sons, at its sole discretion, will repair, replace warranted door or refund the original purchase price. STEVES &SONS, INC. MAXIMUM LIABILITY IS LIMITED TO THE AMOUNT OF THE ORIGINAL PURCHASE PRICEANDWILL NOT COVER THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENTDOOR.The manufacturer will not be liable for any door(s) repaired or replaced without prior written consent.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDINGIMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. MOREOVER,IN NO EVENT WILL STEVES AND SONS, INC. BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES. This warranty protects your legal rights. Other rights vary from state and may apply to you. Some statesand federal laws do not allow the exclusion of implied warranties. In the event these laws apply, the length of any impliedwarranty shall be one (1) year or the shortest time in excess of one year permitted under applicable law. Similarly, somestates do not allow exclusions or limitation of consequential damages and, if applicable, this limitation will not apply.Action on any claims for warping or for photographing may be deferred, at the option of the manufacturer for a periodnot to exceed 12 months from date of claim. Please see care and handling instructions for additional information.This warranty does not cover the following circumstances and are not considered the responsibility of Steves & Sons.Locksets or components not provided by Steves & Sons.Normal wear and tear, and natural weathering of surfaces.Vandalism, misuse, neglect, impact by foreign objects, acts of god, fire, explosion or other casualtyProblems resulting from misuse and or abuse and failure to follow care and maintenance instructionsProblems related to improper finishing of all surfaces, front, back, sides, top and bottom of door, door unit, sidelites and/ortransom.Natural variations in color or texture in any finish shall not be considered a defect.Failure to provide a proper overhang; Damage caused by direct rain exposure, damage caused by extremetemperature, either from direct sunlight and or installation of a storm door. In most climate conditions you need to have an overhang that extends at least half the distance of the height ofyour entryway. (For example if the measurement from the base of the door to bottom of the overhand is 10 feet, the overhang should extend 5 feet)For Southern and Western warm climates, wet climates or if your door will receive direct sunlight during thehottest part of the day you should have an overhang that extends the full height and up to twice the distance ofdistance of the height of your entryway.Installing a storm door can cause extreme heat buildup from the sun or trap moisture depending on yourenvironment. Upon inspection, if the installation of storm door caused damage to the door that may void thewarranty.


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITSFiberGlass

FIBERGLASS DOORS

Our fiberglass entry doors with exclusive Hydroshield Technology™ feature fiberglass reinforced door skins, full-length composite stiles, and composite top & bottom rails to prevent water infiltration on all six sides.

FULL LENGTH COMPOSITE TOP AND BOTTOM RAILS Additional non-porous protection keeps water from seeping into the door and helps prevent the build up of mold or mildew.

FIBERGLASS REINFORCED SKIN Fiberglass is unmarred by the wear and tear of everyday use and is unaffected by moisture and humidity. Our doors will not rot, splinter or warp like wood, and won’t dent or delaminate like steel.

FULL LENGTH COMPOSITE STILES All Plastpro fiberglass entry doors feature full length composite stiles to prevent water infiltration into the door and ensures our door will never warp, rot, or rust.


of 306 9/28/20







of 306 9/28/20






How To Paint Smooth Skin Doors Materials Needed

1. Lint-free cloth 2. Acetone 3. Rubber gloves 4. Masking tape 5. 4" bristle brush 6. Scotch Brite Pad (Fine) or 320-400 grit sandpaper 7. For Water-based application: Acrylic primer/acrylic latex-based exterior grade paint. We

recommend using "Sherwin-Williams PrepRite® Bonding Primer" with compatible acrylic-latex paint for optimal paint adhesion.

Step 1: Surface Preparation

1. Lay door horizontally on saw horses or a table. 2. Remove all the hardware and mask off anything you don't want painted, such as the glass

insert. 3. Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper. 4. Wipe the door with acetone to clean any dust or residue from the surface. Allow acetone to

dry from the surface before applying 5. Do not use hydro-carbon based solvents to clean the surface as such products may leave a

residue. 6. Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's

instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.

7. The primer must be completely dry before applying the topcoat.


of 306 9/28/20






Step 2: Painting

1. Apply exterior grade paint with 4" brush beginning with the panels. 2. It is common practice to paint both stiles the same color as the exterior side of the door. If

applying a second coat, follow the manufacturer's instructions for drying time between coats. 3. Continue to apply the top coat to ALL 6 sides. door which have been bored and morticed for

hardware should be finished inside of the lock bore as well.

Caution

1. When using stains, mineral spirits, paints, or other hazardous materials, always read and follow the manufacturer's instructions. Plastpro, Inc. makes no representations as to the proper use of other manufacturers' products.

2. When working with paints or solvents, make sure the working area is well ventilated. 3. Keep away from heat and flame as materials may be combustible. 4. Paints or solvents may cause skin and eye irritation. Avoid contact with skin and eyes. 5. Keep out of reach of children.

Normal Maintenance Even a well-finished fiberglass door will be affected by exposure and weathering from sun, moisture, and air pollutants. It is considered normal maintenance to re-apply the topcoat approximately every two years.


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITSManufacturer's Warranty - PlastPro Fiberglass Doors - SMOOTH SKIN

PLASTPRO 25 YEARS LIMITED WARRANTY ON SMOOTH SKIN FIBERGLASS DOORS Residential Warranty Holder workmanship that might unreasonably affect its performance. The termsof this 25 Years Limited Warranty initiates from the first Smooth Skin Fiberglass Doors, as sold directly by Plastpro 2000, Inc. are guaranteed to be free of defects in material and date of purchase from an authorized retailer and continues for the stated duration as long as the original warranty holder owns and resides in the premises of which the product was installed. This warranty is for the original owner/user and is non-transferable. The terms of this Limited Warranty exclude failures which are the result of or involve: 1. Accident, negligence, abuse or improper installation (p[ease see manufacture installation guide) improper finishing or improper assembly of hardware, such as the lack of applying the sealant properly for the lockset, causing leakage or failure to reinforced material 2. Installed in abnormal or extreme locations or situations. 3. Improper pre-installation storage (please see manufacture installation instructions). 4. Damage caused by localized application of heat, movement of building or building components, or expansion/contraction of building or building components. 5. Damage caused by high winds, floods, fire and conditions that exceed Plastpro product design and testing specifications. 6. Damage caused by freight carriers, common carriers, private transportation, or any other means of transportation or handling occurring after shipping from Plastpro 2000, Inc. 7. Exposure of the door to extreme elements, storage, installation, maintenance or service. 8. Fire, corrosive fumes, stains, contact with chemically abrasive substances, acts of God, and/or any events or actions not controlled by Plastpro 2000, Inc, or what is considered normal wear and tear. 9. All components, parts, glass, and labor supplied by parties other than Plastpro 2000, Inc. or its agents. In the event of a warranty claim, please contact the builder or dealer where the unit was originally purchased. In the event that is not possible, send written notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200 West Century Blvd.,9th Floor, Los Angeles, CA 90045 upon the discovery of the defect and only within the original warranty period. 1. Door catalog number and description. 2. Name and address of the owner and the installer. 3. Proof of sale. 4. Place of purchase and from whom purchased. 5. Detailed explanation of defect. If Plastpro 2000, Inc. determines the Smooth Skin Fiberglass Door is defective within the terms of the warranty, Plastpro 2000, Inc. will either (a) repair the door without charge,(b) furnish a replacement of the door from (installation costs of the replacement doors and/or doorlite is not included), or (c) refund the purchase price of the door in lieu of furnishing a replacement. If Plastpro 2000, Inc. elects to provide a replacement, the Limited Warranty of the replacement will extend for the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead. The remedies set forth herein are the original owner's exclusive remedies for breach of warranty. In no case shall Plastpro 2000, Inc. be liable to the original owner or any other person for any general, incidental, or consequential damages. There is no other warranty, expressed or implied, including warranties of merchantability and fitness for a particular purpose, except as is set


of 306 9/28/20






Manufacturer's Warranty - PlastPro Fiberglass Doors - TEXTURED

LIMITED LIFETIME WARRANTY ON RUSTIC, MAHOGANY, WOODGRAIN, FIR GRAIN FIBERGLASS DOORS Residential Warranty Holder

Plastpro Fiberglass Doors, as sold directly by Plastpro 2000, Inc. are guaranteed to be free of defects in material and workmanship that might unreasonably affect the performance. The termsof this Limited Lifetime Warranty initiates from the first date of purchase from an authorized retailer and continues for the stated duration as long as the original warranty holder owns and resides in the premises in which the product was installed. This warranty is for the original owner/user and is non-transferable.The terms of this Limited Warranty exclude failures which are the result of or involve: 1. Accident, negligence, abuse, improper installation (please see manufature installation guide), improper finishing or improper assembly of hardware, such as the lack of applying the sealant properly for the lockset, causing leakage or failure to reinforced material 2. Installed in abnormal or extreme locations or situations. 3. Improper pre-installation storage (please see manufacture installation instructions). 4. Damage caused by localized application of heat, movement of building or building components, or expansion/contraction of building or building components. 5. Damage caused by high winds, floods, fire and conditions that exceed Plastpro product design and testing specifications. 6. Damage caused by freight carriers, common carriers, private transportation, or any other means of transportation or handling occurring after shipping from Plastpro 2000, Inc. 7. Exposure of the door to extreme elements, storage, installation, maintenance or service. 8. Fire, corrosive fumes, stains, contact with chemically abrasive substances, acts of God, and/or any events or actions not controlled by Plastpro 2000, Inc, or what is considered normal wear and tear. 9. All components, parts, glass, and labor supplied by parties other than Plastpro 2000, Inc. or its agents. In the event of a warranty claim, please contact the builder or dealer where the unit was originally purchased. In the event that is not possible, send written notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200 West Century Blvd.,9th Floor, Los Angeles, CA 90045 upon the discovery of the defect and only within the original warranty period.

1. Door catalog number and description. 2. Name and address of the owner and the installer. 3. Proof of sale. 4. Place of purchase and from whom purchased. 5. Detailed explanation of defect.

If Plastpro 2000, Inc. determines the Plastpro Fiberglass Door, is defective within the terms of the warranty, Plastpro 2000, Inc. will either (a) repair the door without charge (b) furnisha replacement of the door (installation costs of the replacement doors and/or doorlite is not included), or (c) refund the purchase price of the door in lieu of furnishing a replacement. If Plastpro 2000, Inc. elects to provide a replacement, the Limited Warranty will extend the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead.The remedies set forth herein are the original owner's exclusive remedies for breach of warranty. In no case shall Plastpro 2000, Inc. be liable to the original owner or any other person for any general, incidental, or consequential damages. There is no other warranty, expressed or implied, including warranties of merchantability and fitness for a particular purpose, except as is set forth herein. No distributor, dealer, or Plastpro 2000, Inc. representative has the authority to change or modify this warranty and in no instance shall Plastpro 2000, Inc. be respo sible for indirect, consequential, or incidental damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

***A Specific 3 Year Limited Warranty may apply to Commercial/Multi-Residential applications.***


of 306 9/28/20






Frame Saver Frames

Why Buy a FrameSaver® Door Frame?

FrameSaver® Features 1. Field Proven: Over a decade of “non-rot” performance. 2. FrameSaver® Lifetime Warranty. • Will not rot or decay. • Fully transferable. 3. Easily identifiable FrameSaver® Brand stamped right onto the product. • Ensures the quality. 4. Finishes and paints just like wood. 5. Patented composite bottom won’t absorb water so it won’t rot. • Won’t wick water or swell. • Rot never begins. 6. The composite material is finger-jointed to wood for a perfect fit that maintains the structural integrity of the frame. • Extremely strong and durable. 7. 180 Day Primer comes standard. • 180 days of protection. • Excellent coverage. • Currently developing 100% lift/adhesion prevention. • Improves top coat.

Why ask for FrameSaver® frames in your doors? FrameSaver® Door Frames from Endura are simply the best door frames on the market. They areso dependable that nobody can match. Our patented composite bottom

won’t absorb water, they come with a lifetime transferable warranty that warp, crack or rot and finishes and paints just like wood. FrameSaver’s® finger-jointed wood composite

protects the base of the frame from moisture exposure, and thus prevents water from wicking into the wood. Rot never

has a chance to begin. That’s Performance Standard.

All Steel and FiberGlass Door Units listed in this price book are priced using the primed FrameSaver frame.


of 306 9/28/20






k

FrameSaver® Wood Millwork Components Consumer Limited Lifetime Warranty

This Limited Lifetime Warranty applies to FrameSaver® exterior door frames, brick mould, mullions (mull posts), casing and other genuine FrameSaver® products (“FrameSaver Products” or “Product”) manufactured by Endura Products, Inc. (“Endura”). What This Warranty Covers: Subject to the limitations and exclusions below, Endura warrants that each FrameSaver Product will not rot, decay, or suffer fungal damage resulting from water absorption through the bottom of the Product under conditions in which it was originally installed. Installation Specifications: This Limited Warranty is expressly conditioned upon the installation of the FrameSaver Product in accordance with industry-accepted guidelines or local building codes, and Endura’s installation specifications that the composite portion of the FrameSaver Product must extend at least 3” up from the bottom of each leg. The composite end of the FrameSaver Product must be positioned at the bottom of the Product. Warranty Period: Lifetime from the date that the Product was originally purchased. Fully transferable. Endura also warrants to the original consumer that FrameSaver Products will be free from any defects in materials and workmanship which are not related to rot or decay in the bottom composite portion of the product for a period of one (1) year from the date of manufacture. Exclusive Remedy: In the event that the FrameSaver Product fails to meet this Warranty, Endura will (i) replace any defective product; and (ii) reimburse Warranty Holder for reasonable costs associated with removal, reinstallation, finishing, freight and/or taxes for the Product. Warranty Claims: If you have a problem with your FrameSaver Product, please contact the dealer/distributor from whom you purchased your product or contact us directly at:

Mail: Endura Products Customer Service Attn: FrameSaver Warranty Claims 8817 W. Market St., Colfax, NC 27235 Phone: (800) 334-2006 Fax: (336) 668-4478 Email: [email protected]

You can help us serve you faster by collecting and including the following important information: • Documentation of the Product proof of purchase and purchase date; • Written description of product issues or concerns; • A picture of the defective product; • Your name, address where the product is installed and telephone numbers.

What This Warranty Does Not Cover: This Warranty does not include non-conformities or damages attributable or arising from:

• Normal wear and tear, natural weathering of surfaces. • Rot, decay or other fungal damage to any portion of the frame other than the bottom five (5) inches of the Product. • Warp within tolerances: bow no more than 7/8” per 6’ of length, crook or twist no more than 5/32” per 6’ of length, and cup nomore than 1/16” per 4” or more of width; • Product failure due to misuse or abuse; damage caused by failure to properly finish and provide maintenance, by alteration or modification of the product (e.g. machining of the composite portion of the FrameSaver Product). All bare or unprotected wood surfaces should be primed and painted and top coated within 90 days of installation or exposure for continued warranty coverage. • Improper installation not in conformance with Endura installation instructions or current industry standards or local code conditions.

Important Legal Information: THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER APPLICABLE WARRANTIES AND REMEDIES. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO FRAMESAVER® DOOR FRAMES IS LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty or exclusions of limitations of incidental or consequential damages may last, so these limitations may not apply to you. This Warranty gives you specific you specific legal rights. You may have other rights, which vary, from state to state. Installation and Finishing Requirements

1. Machining: Only the routing of mortises for hinges and locks may be done to the door jambs, mull posts and mull casing. Any trimming or cutting must be done in accordance with industry-accepted guidelinesand Endura’s installation specifications that the composite must extendat least 3” from the bottom face. 2. Storage: Store only in dry and clean areas. Wood is dimensionally influenced by moisture changes in its surrounding environment. Damp, moist or extremely humid environments may result in excessive warping, twisting or bowing of wood products. 3. Mishandling: Do not drag, scrape of slide the door units. They should be lifted and carried. Any damage from mishandling of the product will void this and all future warranty claims. 4. Rough Opening: No more than 1/2” higher and no more than 3/4” wider than the outer dimensions of the door system frame. The rough opening should be no more than 1/8” out of plumb over the height of the opening. The floor or subfloor (subsill, the lowest horizontal structural member of the rough opening) should be capable of being leveled to within 1/16” over the width of the opening. The subsill should not slope toward the interior of the home.


of 306 9/28/20







FrameSaver Limited Warranty (continued)

g

FrameSaver®

5. Caulking Sealer: Apply three beads of polyurethane sealant, ½” wide each, along entire rough opening underneath sill. 6. Level, Plumb and Square: Assure that the door system frame is located within the rough opening and shim so that the frame is level, plumb and square. Shim behind each hinge, and the strike side of the frame opposite hinges. Shim behind deadbolt and strike plates. 7. Anchoring: Nail or screw the door frame opening structure, do not use the brickmould to anchor unit to the rough opening. At least one of the fasteners for each of the hinges and lock strike locations should penetrate through the door system frame and into the rough stud to provide maximum holding strength and secure anchorage. 8. Flashing: Install at the jambs, sill and head as required per manufacturer’s instructions to prevent water from penetrating into the wall cavity. 9. Caulking: All joints must be caulked between the rough opening and the door system frame. Caulk carefully between the sill andsubfloor to prevent water from entering below the door unit. Fill all gaps of ¼” or more with fill rod. Use only recommended caulking sealants and apply in accordance with the caulking sealantmanufacturer’s installation instructions. 10. Field Service: It is the responsibility of the installing contractor and painter to fill all nail or screw holes and refinish raw surfaces that result from job fitting, and the cleaning of surfaces prior to painting.

Painting Instructions 1. Apply topcoat within 90 days of installation. If longer than 90 days, the primed surface should be sanded, cleaned and field-primed with Sherwin-Williams X-I-M Primer Sealer prior to finishing. 2. Thoroughly dry, make free of dust, dirt, oil, grease, wax, chalk and other contaminants. 3. A high quality exterior latex paint, preferably a 100% acrylic based product, should be used as a finish coat. 4. Follow the paint manufacturer’s recommendations on thinning, application techniques, re-coat and dry times. 5. In general, paint should be applied when both the surface and air temperature is between 50 and 90 degrees F.Relative humidity should be below 85%. 6. DO NOT paint weatherstrip or corner pads. Paints, stains and varnishes contain solvents which, when coming in contactwith plastics and vinyl used in weatherstripping, cause these materials to lose their flexible qualities, making them brittle. 7. Repainting every 1 to 5 years will be required, depending upon weather exposure and the paint manufacturer’s recommendations. Any signs of blistering, peeling or cracking the finish should be immediately repaired to protect the wood underneath. Failure to properly protect the frame with a top coat will result in wood damage, including finger joint damage. 8. Recaulking is required to maintain integrity of joints. Any signs of cracks along joints of the brickmould, frames, headers or mulls should be immediately resealed with a high quality exterior caulk.


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITSPlastPro PFTM ALL COMPOSITE Frames

We stock the PF frame in Primed White and Textured Tan frame.

An upgrade to the All Composite PlastPro PF frame is available on Most of our Exterior Steel and FiberGlass Door Units

PFTM Frames from PlastPro, Inc. are an innovative alternative to traditional wood door jambs. After extensive research and development, PlastPro has formulated a poly-fiber doorframe system that combines all the strengths and convenience of wood with enhanced properties that make it moisture, rot, and insect resistant. This unique formulation means that PlastPro’s PFTM

Frames will not absorb or wick moisture and will never warp, splinter, or rot. And the advanced Frame system can be machined the same way as traditional wood jambs with no added hassles. PlastPro’s PFTM Frames guarantee a long-lasting, rot-free entryway that will maintain its integrity today, as well as years down the road.


of 306 9/28/20






For added protection against water infiltration see OPTIONS pages in this section and Section

10 for:

LIMITED LIFETIME WARRANTY ON PLASTPRO PF™ FRAMES Plastpro PF™ Frames, as sold directly by Plastpro 2000, Inc., are guaranteed to be free of defects in material and workmanship that might unreasonably affect its performance. The terms of this Limited Lifetime Warranty extends from the first date of purchase at retail for the life of the product, as long as the original owner owns Plastpro PF™

Frames. This warranty is for the original user and is non-transferable. If Plastpro 2000, Inc. determines the PF™ Frames are defective within the terms of the warranty, Plastpro 2000, Inc. will either (a) repair the PF™ Frames without charge, (b) furnish a replacement of the PF™ Frames from stock (installation costs of the replacement PF™ Frames is not included), or (c) refund the purchase price of the product in lieu of furnishing a replacement. If Plastpro 2000, Inc. elects to provide a replacement, the Limited Warranty of the replacement will extend only for the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead. *This warranty does not cover dark colors. Dark colors are considered any color that falls within the lightness (L) value of 56 to 0, where 100 is white and 0 is black. If Plastpro 2000, Inc. elects to provide a replacement product, the Limited Warranty of the replacement will extend only for the balance of the original warranty period. If the original owner fails to provide satisfactory proof of the date of the purchase, the date of manufacture shall be used instead. If Plastpro decides to replace the Product(s) according to the above guidelines, you may be required to return the defective Product(s), at our cost, to us, which will become our property. We will then deliver replacement or repaired Product(s), at our expense, to the original address from which the defective Product(s) were delivered to us. Our liability, at no time, shall exceed the purchase price of the Product(s). The warranty on replacement product will extend for the remained of the warranty period of the original unit. The remedies set forth herein are the original owner's exclusive remedies for Breach of Warranty. In no case shall Plastpro 2000, Inc. be liable to the original owner or any other person for any general, incidental, or consequential damages. There is no other warranty, expressed or implied, including warranties of merchantability and fitness for a particular purpose, except as is set forth herein. No distributor, dealer, or Plastpro 2000, Inc. representative has the authority to change or modify this warranty and in no instance shall Plastpro 2000, Inc. be responsible for indirect, consequential, or incidental damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. The terms of this Limited Warranty exclude failures which are the result of or involve:

1. Accident, negligence, abuse or improper use or installed in unusual, abnormal or extreme locations or situations. 2. Stress caused by localized application of heat, movement of building or building components, or expansion/contraction of building or building components. 3. Damage caused by freight carriers, common carriers, private transportation, or any other means of transportation or handling, occurring after shipping from Plastpro 2000, Inc. 4. Damage to surfaces caused by fire, corrosive fumes, stains, contact with chemically abrasive substances, airborne pollutants, sanding, improper washing, extreme elements, acts of God and / or any event not controlled by Plastpro 2000, Inc. 5. Damage done deliberately, by negligence, abnormal working conditions, or failure to follow instructions regarding staining, painting or installations or what is considered normal wear and tear. 6. Custom surface finishes or alternations applied to product(s) in the field. 7. Door hardware is not warranted. 8. Improper or insufficient handling, storage, installation, maintenance, or service. 9. All components, parts, and labor supplied by parties other than Plastpro, 2000 Inc. or its agents.

In the event of a warranty claim, please contact the builder or dealer where the unit was originally purchased. In the event that is not possible, send written notice of the defect by certified U.S. Mail to Plastpro 2000, Inc., 5200 West Century Blvd., 9th Floor, Los Angeles, CA 90045 upon the discovery of the defect. The written notice must include the following:

1. Door catalog number and description. 2. Name and address of the owner and the installer. 3. Proof of sale. 4. Place of purchase and from whom purchased. 5. Detailed explanation of defect.


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITSDoor Specifications

10 - 12

13 - 14

15 - 16

2-8 31-3/4"

Door Size Actual net width 2-0 23-3/4" 2-6 29-3/4'

3-0 35-3/4"

Boring SpecificationsStandard bore: 2-1/8" lock bore at 2-3/8" backset.Deadbolt bore: 2-1/8" at 5-1/2" o/c above standard.


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITSUnit and Rough Opening Specifications

Door Size Actual Unit Width Actual Unit Width Rough Opening

2-0 25 7/16 27 15/16 26Width Outside Frame (inches) (Outside Brickmould) (inches) Width (inches)

2-6 31 7/16 33 15/16 32 2-8 33 7/16 35 15/16 34 3-0 37 7/16 39 15/16 38 4-0 49 15/16 52 7/16 50 1/2 5-0 61 15/16 64 7/16 62 1/2

6-0 73 15/16 76 7/16 74 1/2 5-4 65 15/16 68 7/16 66 1/2

1-0 / 3-0 / 1-0 64 7/16 66 15/16 651-2 / 3-0 / 1-2 68 7/16 70 15/16 69

Door Size Actual Unit Height Actual Unit Height Rough OpeningHeight (Outside Frame) (Outside Brickmould) Height

6-8 81 11/16 82 15/16 82

Open out units with bumper sills are 5/8" shorter in frame and brick mould height than open in units. The outside brickmould width is 1/2" wider.

6-8 with 12" Transom 95 3/16 96 7/16 95 1/2

8-0 97 11/16 98 15/16 98


of 306 9/28/20





STEEL and FIBERGLASS DOOR UNITS with FrameSaver

slide Bolts All prices are LIST. Single Double Side Lts

For Double Bore ADD $10 $10 $10Screw Type Adjustable Sill, Mill ADD $12 $22 includedScrew Type Adjustable Sill, Bronze ADD $20 $39 $20For ZAC Self Adjusting' Mill sill ADD 20 41 19For ZAC Self Adjusting Bronze sill ADD 31 61 39For open out with bumper Mill sill and NRP hinge ADD 23 40 65For open out with bumper Bronze sill and NRP hinge ADD 34 61 86For PF Composite jamb 4-5/8" ADD 66 84 84For Primed Frame (not Frame Saver) - 4-5/8"x6-8" (only) DEDUCT 26 28 28

47 in this section.

FLUSH GLAZED 1 Lt - LowE

n/s $666 n/s n/s 666 n/s n/s 666 n/s n/s 666 n/s n/s 1,352 n/s n/s 1,352 n/s n/s 1,352 n/s n/s 1,352 n/s

Flush Glazed - Full Light

3-0 x 6-8 "

Standard Specifications: 4-5/8" FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges. White Aluminum Ultimate Astragal with Push Bolts on doubles.

6-8 Units For other Frame and Unit options see page

Fiberglass Smooth

Flush Glazed doors are clean looking, smooth finished, one light doors

with no raised moulding. The intergral light allows for smaller stiles and rails,

and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.

SDL - Simulated Divided Light - option is available on Direct Glazed doors. See SDL Option in the OPTIONS pages at the end of this section.

6-8

5-0 x 6-8 "5-4 x 6-8 "6-0 x 6-8 "

Full Lite2-0 x 6-8 Single2-6 x 6-8 "2-8 x 6-8 "

4-0 x 6-8 Double


of 306 9/28/20








47 in this section.


For other Frame and Unit options see page

FLUSH GLAZED 1 Lt / PANEL

n/s $921 $901 n/s 921 901 n/s 921 901

n/s 1,863 1,822 n/s 1,863 1,822 n/s 1,863 1,822

Flush Glazed doors are clean looking, Smooth or Mahogany Textured finished,

one light doors with no raised moulding. The intergral light allows

for smaller stiles and rails, and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.


6-8 Units

Mahogany Textured

2-6 x 6-8 Single

3/4 Lite over One Panel

Fiberglass Smooth

2-8 x 6-8 "3-0 x 6-8 "

5-0 x 6-8 "5-4 x 6-8 "6-0 x 6-8 "

6-8

Flush Glazed 1 Lt / Panel


of 306 9/28/20








47 in this section.



64" insert

Insert

1464-1lt 2-0 x 6-8 Single $551 $661 $7702064-1lt 2-6 " " 516 626 7352264-1lt 2-8 " " 516 626 7352264-1lt 3-0 " " 516 626 7351464-1lt 4-0 " Double 1,122 1,342 1,5612064-1lt 5-0 " " 1,051 1,271 1,4902264-1lt 5-4 " " 1,051 1,271 1,4902264-1lt 6-0 " " 1,051 1,271 1,490

RLB 1464 1L 2-0 x 6-8 Single $782 $892 $1,002RLB 2064 1L 2-6 " " 757 867 977RLB 2264 1L 2-8 " " 757 867 977RLB 2264 1L 3-0 " " 757 867 977RLB 1464 1L 4-0 " Double 1,584 1,804 2,023RLB 2064 1L 5-0 " " 1,535 1,755 1,974RLB 2264 1L 5-4 " " 1,535 1,755 1,974RLB 2264 1L 6-0 " " 1,535 1,755 1,974

6-8 UnitsFull Light Inserts

Stock inserts are paintable. Inserts

with a stainable frame may be available. Please check with

office.

Full Lite

Full Light with Blinds Full Lite w/ Raise & Lower Blinds

Steel Fiberglass Smooth

Fiberglass Textured

Full Light


of 306 9/28/20








47 in this section.



64" insert

&

48" insert

These inserts are with a stainable frame

Insert

2064-8lt SDL n/s $929 $1,0392264-8lt SDL $819 929 1,0392264-8lt SDL 819 929 1,0392064-8lt SDL n/s 1,879 2,0982264-8lt SDL 1,659 1,879 2,0982264-8lt SDL 1,659 1,879 2,098

2248 -4lt SDL n/s 912 $1,0912248 -4lt SDL 829 912 1,0912248 -4lt SDL n/s 1,845 2,2012248 -4lt SDL 1,679 1,845 2,201

2248 -6Lt SDL n/s $894 $1,0732248 -6Lt SDL $811 894 1,0732248 -6Lt SDL n/s 1,809 2,1652248 -6Lt SDL 1,643 1,809 2,165

The look of a true divided lite with a butyl backing strip and an internal

spacer.

Fiberglass SmoothSteel

3-0 " "5-4 " "

SDL - 4Lt / 2Pnl 4 Light SDL over panel -3/4 Lite

SDL - 8 Lt 8 Lite SDL Grid -Full lite

2-8 " "

5-4 " "

3-0 " "5-0 " Double

6 Light SDL over panel -3/4 Lite2-8 " Single3-0 " "5-4 " "6-0 " "

6-0 " "

SDL Insert

2-6 x 6-8 Single

6-0 " "

2-8 " Single

Fiberglass Textured

SDL - 6Lt / 2Pnl

6-8 Units


of 306 9/28/20








47 in this section.



64" insert

Insert

2064-15lt $535 $645 $7552264-15lt 535 645 7552264-15lt 535 645 7552064-15lt 1,090 1,310 1,5292264-15lt 1,090 1,310 1,5292264-15lt 1,090 1,310 1,529

1464-10lt $551 $661 $7702064-10lt 540 650 7602264-10lt 540 650 7602264-10lt 540 650 7601464-10lt 1,122 1,342 1,5612064-10lt 1,101 1,320 1,5402264-10lt 1,101 1,320 1,5402264-10lt 1,101 1,320 1,540

Stock inserts are paintable.

Inserts with a stainable frame may be available. Please check with office.

2-6 x 6-8 Single2-8 " "

2-6 "

6-0 " "

2-0 x 6-8 Single

5-0 " 5-4 " "

3-0 " "

4-0 " Double

5-0 " Double

Full 10 Lt 10 Lite External Grid

5-4 " "6-0 " "


Fiberglass Textured

6-8 UnitsFull Divided Light

3-0 " "

Full 15 Lt 15 Lite External Grid

2-8 " "


of 306 9/28/20








47 in this section.



64" insert

Insert

2064-6lt $751 $861 $9712264-6lt 751 861 9712264-6lt 751 861 9712064-6lt 1,523 1,742 1,9622264-6lt 1,523 1,742 1,9622264-6lt 1,523 1,742 1,962

2064- 8lt 751 861 9712264- 8lt 751 861 9712264- 8lt 751 861 9712064- 8lt 1,523 1,742 1,9622264- 8lt 1,523 1,742 1,9622264- 8lt 1,523 1,742 1,962



6 Lite External Grid

5-4 " "

Full 8 Lt 68Lite External Grid

2-6 x 6-8 Single



Full 6 Lt

5-0 " Double

6-0 " "

2-8 " "

5-4 " "

3-0 " "

Fiberglass Textured

6-0 " "

2-6 x 6-8 Single

3-0 " "2-8 " "

5-0 " Double


of 306 9/28/20








47 in this section.



$386 $482 $592386 482 592386 482 592793 984 1,203793 984 1,203793 984 1,203

$447 $482 592447 482 592915 984 1,203915 984 1,203

ns ns 696ns 506 696ns ns 1,411ns 1,033 1,411

Fiberglass Smooth

3/4 4 Panel 4 Panel2-8 " "

Steel Fiberglass Textured

6-8 UnitsPanel Doors

6 Panel 6 Panel

New England (True) 4 Panel 4 Panel

2-6 x 6-8 Single2-8 " "3-0 " "

2-8 " "3-0 " "5-4 " "6-0 " "

5-4 " "6-0 " "

5-0 " Double5-4 " "6-0 " "

3-0 " "


of 306 9/28/20








47 in this section.



n/s $515 n/s423 515 n/s n/s 1,049 n/s

867 1,049 n/s

n/s $515 n/s 515 n/s 1,049 n/s n/s 1,049 n/s

$419 $514 n/s419 514 n/s858 1,048 n/s858 1,048 n/s

2 Panel Cottage with V-Groove Panels

Panel Doors 6-8 Units

See RUSTIC SERIES Fiberglass

2 PNL Cottage - Arch Plank

3-0 " "5-4 " "

2-8 " "

2-8 " "

6-0 " "

2 PNL SQR

2-8 " "

2 Panel Square

2 Panel Arch Top

6-0 " "


Fiberglass Textured

2 PNL ARCH TOP

5-4 " "6-0 " "

3-0 " "

3-0 " "5-4 " "


of 306 9/28/20








47 in this section.



Insert

0806 -1LT $468 $563 ns0806 -1LT 468 563 6730806 -1LT 956 1,147 ns0806 -1LT 956 1,147 1,366

2206 -4LT $470 $566 ns2206 -4LT 470 566 6762206 -4LT 961 1,152 ns2206 -4LT 961 1,152 1,371

Fiberglass Textured

Fiberglass Smooth



Steel

With Inserts

Colonial 2 Lite2-8 x 6-8 Single3-0 " "

2Lt / 4Pnl

5-4 " Double6-0 " "

3-0 " "5-4 " Double

2-8 x 6-8 Single

Panel Doors

Colonial 4 Lite External Grid4Lt / 4Pnl

6-8 Units

6-0 " "


of 306 9/28/20








47 in this section.



Insert

n/s $535 n/s1,090

2215-1LT LE n/s $757 n/s2215-1LT LE 1,535

Fiberglass Smooth

Craftsman

* DRS3F-1LT Shaker door has a 22x15 1Lt LowE insert.

SDL bars can be applied to provide for a 2, 3, 4, or 6 light

design. See the SDL option in the

"OPTIONS" area in the back of this section.


DRS3F3-0 x 6-8 Single

DRS3F -1LT LE3-0 x 6-8 Single

6-0 " "

6-0 " "

Craftsman / 3 Flat Panel Shaker

Craftsman 1LT / 2 Flat Panel Shaker


of 306 9/28/20








47 in this section.



36" insert

Insert

2036-9lt $472 $567 $6772236-9lt 472 567 6772236-9lt 472 567 677

2236-4lt $603 $699 $8082236-4lt 603 699 808

2036 1 Lt $472 $567 $6772236 1 Lt 465 560 6702236 1 Lt 465 560 670

RLB 2036 1Lt $711 $807 $917RLB 2236 1Lt 711 807 917RLB 2236 1Lt 711 807 917



Fiberglass Textured




w/ 1/2 Lt Inserts

3-0 " "

3-0 " "


2-6 x 6-8 Single

2-8 x 6-8 Single3-0 " "

2-6 x 6-8 Single2-8 " "

1 Lt / 2 Panel

2-6 x 6-8 Single

1Lt Blinds / 2 Panel

4 Lt / 2 Panel

2-8 " "

9 Lt / 2 Panel

1/2 Lite w/ Raise & Lower Blinds

1 Lite / Two Panel

2-8 " "3-0 " "


of 306 9/28/20








47 in this section.



48" inseert

Insert

2248 1 Lt 2-8 x 6-8 Single n/s $654 $7282248 1 Lt 3-0 " " 571 654 7282248 1 Lt 5-4 " Double n/s 1,328 1,4772248 1 Lt 6-0 " " 1,162 1,328 1,477

2248 4 Lt n/s $864 $9382248 4 Lt 781 864 9382248 4 Lt n/s 1,748 1,8972248 4 Lt 1,582 1,748 1,897

2248 RLB n/s $908 $9832248 RLB 825 908 9832248 RLB n/s 1,837 1,9852248 RLB 1,671 1,837 1,985

6-8 UnitsPanel Doorsw/ 2/3Lt Inserts

1 Lt RLB -2/3 Lite 2-8 x 6-8 Single3-0 " "

4 Lt -2/3 Lite




Fiberglass Textured

2/3 1Lt / 2 Panel 1 Lt -2/3 Lite

5-4 " Double6-0 " "

2/3 4Lt / 2 Panel 2-8 x 6-8 Single3-0 " "

2/3 Lt Blinds / 2 Panel

5-4 " Double6-0 " "


of 306 9/28/20








47 in this section.



Insert

590 Sun 5Lt $472 $549 n/s590 Sun 5Lt 472 549 669590 Sun 5Lt 963 1,118 n/s590 Sun 5Lt 963 1,118 1,3596-0 " Double

6-8 Units5 Light 1/2 Circle

Steel

5 Lt Sunburst / 4Panel

Fiberglass Smooth

Fiberglass Textured

2-8 x 6-8 Single3-0 " "5-4 " "

Sunburst


of 306 9/28/20








47 in this section.



36" insert

Insert

2-0 x 6-8 Single $383 $482 $5922-6 " " 383 482 n/s2-8 " " 383 482 n/s3-0 " " 383 482 5924-0 " Double 786 984 1,203

786 984 n/s786 984 n/s786 984 1,203

2036-1lt $468 $578 n/s2236-1lt 461 571 n/s

" 461 571 670

2236-VL 2-8 x 6-8 Single $586 696 n/s" 3-0 " " 586 696 794

Flush FLUSH

Fiberglass Textured

Fiberglass SmoothSteel

Flush -1/2 Lite Half Lite

Flush with Vent Lite

5-0 " "



6-8 UnitsFlush & Panel Doors

5-4 " "6-0 " "

3-0 " "

2-6 x 6-8 Single2-8 " "

Vent Light Insert

1/2 Lt Flush bottom


of 306 9/28/20








47 in this section.



36"

insert 64" insert

2236 1 Lt LowE 2-8 " " $494 $600 $6992236 1 Lt LowE 3-0 " " 494 600 699

2264 1 Lt LowE 2-8 x 6-8 Single $564 $674 $7842264 1 Lt LowE 3-0 " " 564 674 7842264 1 Lt LowE 5-4 x 6-8 Double 1,149 1,369 1,5882264 1 Lt LowE 6-0 " " 1,149 1,369 1,588

6-8 UnitsLowE Inserts

1 Light LowEFull 1 Lt LowE




Fiberglass Textured

1 Lt LowE / 2 Panel 1 Lite LowE / Two Panel


of 306 9/28/20








47 in this section.



n/s n/s $1,052 n/s n/s 2,1256-0 x 6-8

6-8 UnitsRUSTIC SERIES

Fiberglass Textured

2 PNL ARCH TOP PLANK3-0 x 6-8

DRA2A


of 306 9/28/20








47 in this section.



FLUSH GLAZED 1 Lt -LowE

n/s $965 n/s n/s 965 n/s n/s 965 n/s n/s 965 n/s

1,951 n/s n/s 1,951 n/s n/s 1,951 n/s n/s 1,951 n/s

Fiberglass Smooth

6-0 x 8-0 "

Flush Glazed / Direct Glazed Full Lite

5-4 x 8-0 "

2-0 x 8-0 Single

3-0 x 8-0 "

5-0 x 8-0 "4-0 x 8-0 Double 8-02-8 x 8-0 "

8-0 Units

Flush Glazed doors are clean looking, smooth finished, one light doors

with no raised moulding. The intergral light allows for smaller stiles and rails,

and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.


2-6 x 8-0 Single


of 306 9/28/20








47 in this section.



FLUSH GLAZED 1 Lt / PANEL

$1,026 $1,1281,026 1,1281,026 1,128

2,073 2,2762,073 2,2762,073 2,276

2-8 x 8-0 "3-0 x 8-0 "

5-4 x 8-0 "

2-6 x 8-0 Single

5-0 x 8-0 Double

Fiberglass Smooth

Mahogany Textured

8-0

6-0 x 8-0 "

8-0 Units

Flush Glazed doors are clean looking, Smooth or Mahogany Textured finished,

one light doors with no raised moulding. The intergral light allows

for smaller stiles and rails, and a larger glass area with up to 35% more daylight area than a conventional door with an

insert.



of 306 9/28/20








47 in this section.



80" insert

Insert

1480 1Lt 2-0 x 8-0 Single $955 $1,076 n/s2080 1Lt 2-6 x 8-0 " 912 1,033 1,2052280 1LT 2-8 x 8-0 " 912 1,033 1,2052280 1LT 3-0 x 8-0 " 912 1,033 1,2051480 1Lt 4-0 x 8-0 Double 1,931 2,172 n/s2080 1Lt 5-0 x 8-0 " 1,845 2,086 2,4312280 1LT 5-4 x 8-0 " 1,845 2,086 2,4312280 1LT 6-0 x 8-0 " 1,845 2,086 2,431

RLB 2080 1Lt 2-6 x 8-0 Single $1,302 $1,423 $1,596RLB 2280 1Lt 2-8 x 8-0 " 1,302 1,423 1,596RLB 2280 1Lt 3-0 x 8-0 " 1,302 1,423 1,596RLB 2080 1Lt 5-0 x 8-0 Double 2,625 2,866 3,212RLB 2280 1Lt 5-4 x 8-0 " 2,625 2,866 3,212RLB 2280 1Lt 6-0 x 8-0 " 2,625 2,866 3,212

8-0 Units

Stock inserts are paintable. Inserts

with a stainable frame may be available. Please check with

office.

Full Light Inserts

Full Light

Full Light with Blinds 1 Lt w/ Raise & Lower Blinds

Fiberglass Textured


1 Lt


of 306 9/28/20








47 in this section.



48" insert

Insert

2248 4Lt SDL $1,058 $1,253 $1,3402248 4Lt SDL 1,058 1,253 1,3402248 4Lt SDL 2,040 2,429 2,6052248 4Lt SDL 2,040 2,429 2,605

2248 6Lt SDL $1,040 $1,234 $1,3222248 6Lt SDL 1,040 1,234 $1,3222248 6Lt SDL 2,100 2,489 2,6652248 6Lt SDL 2,100 2,489 2,665

6 Light SDL -2/3 Lite6-0 x 8-0 "

SDL - 6Lt

3-0 x 8-0 "2-8 x 8-0 Single

6-0 x 8-0 "

8-0 Units

5-4 x 8-0 Double

2-8 x 8-0 Single3-0 x 8-0 "

2/3 LIGHT SDL SERIES

The look of a true divided lite with a butyl backing strip and

an internal spacer.


Fiberglass Textured

SDL - 4Lt 4 Light SDL -2/3 Lite

5-4 x 8-0 Double

External SLD GridTan/Stainable Insert

Simulated Divided Light


of 306 9/28/20








47 in this section.



80" insert

Insert

2280 18Lt $945 $1,066 $1,2382280 18Lt 945 1,066 1,2382280 18Lt 1,910 2,151 2,4972280 18Lt 1,910 2,151 2,497

2080 8Lt $1,213 $1,334 $1,5062280 8Lt 1,232 1,352 1,5252280 8Lt 1,232 1,352 1,5252080 8Lt 2,447 2,688 3,0332280 8Lt 2,484 2,725 3,0702280 8Lt 2,484 2,725 3,070

3-0 x 8-0 "

2-6 x 8-0 Single2-8 x 8-0 "

2-8 x 8-0 "

Full 8 Lt

3-0 x 8-0 "5-4 x 8-0 "6-0 x 8-0 "

Full 18 Lt


5-0 x 8-0 Double

6-0 x 8-0 "

Fiberglass Smooth

Fiberglass Textured

18 Lt External

8 Lt External

5-4 x 8-0 "

Steel


of 306 9/28/20








47 in this section.



80" insert

Insert

2280 1Lt LowE $985 $1,105 $1,2782280 1Lt LowE 985 1,105 1,2782280 1Lt LowE 1,990 2,231 2,5762280 1Lt LowE 1,990 2,231 2,576

8-0 UnitsFull Light LowE


Fiberglass Textured

Full 18 Lt 18 Lt External 2-8 x 8-0 "3-0 x 8-0 "5-4 x 8-0 "6-0 x 8-0 "


of 306 9/28/20








47 in this section.



Flush DD-1 -8' n/s $773 n/sn/s 773 n/sn/s 773 n/s

3-0 x 8-0 " $650 773 n/sn/s 1,566 n/sn/s 1,566 n/sn/s 1,566 n/s

6-0 x 8-0 " 1,320 1,566 n/s

Fiberglass Textured

2-8 x 8-0 "

5-0 x 8-0 "

2-6 x 8-0 "

Flush2-0 x 8-0 Single

4-0 x 8-0 Double

8-0 UnitsFlush Doors

5-4 x 8-0 "



of 306 9/28/20








47 in this section.



n/s $858 $945$654 858 945654 858 945n/s 1,735 1,911

1,329 1,735 1,9111,329 1,735 1,911

n/sn/s $858 $945

n/sn/s 1,735 1,911

Panel Doors

6 Panel 6 Panel

6-0 " "

3-0 " "

4 Panel 4 Panel

8-0 Units

Fiberglass Smooth

2-6 x 8-0 Single2-8 x 8-0 " 3-0 x 8-0 "5-0 x 8-0 Double5-4 x 8-0 "6-0 x 8-0 "


of 306 9/28/20








47 in this section.



n/s $858n/s 858

1,7351,735

n/s $843n/s 843

1,7051,705

8-0 Units

3-0 " "

6-0 " "

2 Panel Arch

Panel Doors


2 Panel Arch

Fiberglass Smooth

2-8 x 8-0Single3-0 " "5-4 " Double

2 Panel Square

6-0 " "

2 Panel Square 2-8 x 8-0 Single

5-4 " Double



of 306 9/28/20








47 in this section.



Insert

22481Lt $791 994 n/s22481Lt 791 994 $1,08222481Lt 1,603 2,009 n/s22481Lt 1,603 2,009 2,185

2248 RLB $1,054 1,248 n/s2248 RLB 1,054 1,248 $1,3362248 RLB 2,128 2,517 n/s2248 RLB 2,128 2,517 2,693

2/3 1Lt / 2 Panel

3-0 x 8-0 "5-4 x 8-0 Double6-0 x 8-0 "

External Grid

2-8 x 8-0 Single

Fiberglass Textured


1 Lt -2/3 Lite

8-0 Units2/3 LIGHT SERIES

2/3 Lt Blinds / 2 Panel rlb2-8 x 8-0 Single3-0 x 8-0 "5-4 x 8-0 Double6-0 x 8-0 "




of 306 9/28/20








47 in this section.



Insert

2248 4Lt $1,010 n/s n/s2248 4Lt 1,010 1,204 1,2922248 4Lt 2,040 n/s n/s2248 4Lt 2,040 2,429 2,605

2248 6Lt $1,010 n/s n/s2248 6Lt 1,010 1,204 1,2922248 6Lt 2,040 n/s n/s2248 6Lt 2,040 2,429 2,605

Fiberglass Textured

3-0 x 8-0 "

2/3Lt 4 Lt -8'2-8 x 8-0 Single3-0 x 8-0 "

6-0 x 8-0 "

Fiberglass Smooth

2-8 x 8-0 Single

6-0 x 8-0 "

External Grid


2/3Lt 6 Lt -8'

5-4 x 8-0 Double

5-4 x 8-0 Double

4 Lt external grid

6 Lt external grid


of 306 9/28/20








47 in this section.



NEW 1 Pnl Bottom

Insert

2264-1lt n/s $1,140 n/s2264-1lt n/s 1,140 n/s2264-1lt n/s 2,301 n/s2264-1lt n/s 2,301 n/s

RLB 2264 1L n/s $1,382 n/sRLB 2264 1L n/s 1,382 n/sRLB 2264 1L n/s 1,659 n/sRLB 2264 1L n/s 2,784 n/s




Fiberglass Smooth

Fiberglass Textured

3/4 1Lt / 1 Panel 2-8 x 8-03-0 x 8-05-4 x 8-0 6-0 x 8-0

3/4 Lt Blinds / 1 Panel R & L Blinds -3/4 Lite2-8 x 8-03-0 x 8-05-4 x 8-0 double

Over 1 Panel

1 Lt -3/4 Lite

6-0 x 8-0


of 306 9/28/20








47 in this section.



NEW 1 Pnl Bottom

Insert

2264-6lt n/s $1,376 n/s2264-6lt n/s 1,376 n/s2264-6lt n/s 2,772 n/s2264-6lt n/s 2,772 n/s

2264- 8lt n/s $1,376 n/s2264- 8lt n/s 1,376 n/s2264- 8lt n/s 2,772 n/s2264- 8lt n/s 2,772 n/s

Fiberglass Smooth

Fiberglass Textured

3-0 x 8-05-4 x 8-0 double6-0 x 8-0

Over 1 Panel

3/4 6Lt / 1 Panel 6 Lt -3/4 Lite2-8 x 8-03-0 x 8-05-4 x 8-0 double6-0 x 8-0

3/4 8Lt / 1 Panel 8 Lt -3/4 Lite2-8 x 8-0


External Grille Insert


of 306 9/28/20








47 in this section.



Insert

2264-1lt n/s $1,140 n/s2264-1lt n/s 1,140 $1,3732264-1lt n/s 2,301 n/s2264-1lt n/s 2,301 $2,766

RLB 2264 1L n/s $1,382 n/sRLB 2264 1L n/s 1,382 $1,615RLB 2264 1L n/s 2,784 n/sRLB 2264 1L n/s 2,784 $3,250

Fiberglass Textured

5-4 x 8-0 6-0 x 8-0

3-0 x 8-0

3/4 1Lt / 2 Panel 2-8 x 8-0

Fiberglass Smooth

3/4 Lt Blinds / 2 Panel R & L Blinds -3/4 Lite2-8 x 8-0




3-0 x 8-05-4 x 8-0 double6-0 x 8-0

Over 2 Panel

1 Lt -3/4 Lite


of 306 9/28/20








47 in this section.



Insert

2264-6lt n/s $1,376 n/s2264-6lt n/s 1,376 $1,6082264-6lt n/s 2,772 n/s2264-6lt n/s 2,772 $3,237

2264- 8lt n/s $1,376 n/s2264- 8lt n/s 1,376 $1,6082264- 8lt n/s 2,772 n/s2264- 8lt n/s 2,772 $3,237

Fiberglass Smooth

Fiberglass Textured


External Grille Insert

6-0 x 8-0

2-8 x 8-03-0 x 8-0


2-8 x 8-03-0 x 8-05-4 x 8-0 double6-0 x 8-0

5-4 x 8-0 double


Over 2 Panel


of 306 9/28/20









47 in this section.



2248 6Lt GBG n/s n/s $1,5942248 6Lt GBG n/s n/s 3,209

2248 6Lt GBG n/s n/s $1,4832248 6Lt GBG n/s n/s 2,987

DRA2P80

6-0 x 8-0

DRA2A80

6-0 x 8-0

2 PNL SQUARE TOP PLANK3-0 x 8-0

2 PNLARCH TOP PLANK3-0 x 8-0

RUSTIC SERIES

Fiberglass Textured

8-0 Units


of 306 9/28/20







OPTIONS: Single Sidelite

DEDUCT 242.69DEDUCT 297.02

Standard Side Light Units

1/2 Lite 1'0" & 1'2" $478 1'0" & 1'2" $562 1'0" & 1'2" $6481/2 Lite 1'0" & 1'2" 478 1'0" & 1'2" 562 1'0" & 1'2" 648Full Lite 1'0" & 1'2" 494 1'0" & 1'2" 582 1'0" & 1'2" 603Full Lite 1'0" & 1'2" 496 1'0" & 1'2" 585 1'0" & 1'2" 6052/3 Lite 1'0" & 1'2" 590 1'0" & 1'2" 674 1'0" & 1'2" 6952/3 Lite 1'2" 907

1'0" & 1'2" 423 1'0" & 1'2" full 507 1'0" & 1'2" 527

Full Lite 1'2" only 813 1'2" (14") $926 n/s

2/3 Lite n/s " 767 n/s

3/4 Lite n/s " 856 n/s

3/4 Lite n/s 1'2" 1,103 n/s

1'2" only 578 " 749 n/s n/s

Steel

Standard sidelight units are mulled to fiberglass and steel door units and will have a continuous

aluminum sill.

For other options see OPTIONS pages beginning on the next page. All prices are LIST.

Specifications: FRAME SAVER Frame -Rabbeted primed finger-jointed jambs with Composite bottom. FRAME SAVER WM 180 All Purpose Brick Mould. Adjustable High-dam aluminum continuous sill

with vinyl threshold cap. Mulled to standard door unit.

For SideLite Panel Only - no frame. 6-8For SideLite Panel Only - no frame. 8-0

Fiberglass Textured

Fiberglass Smooth

5Lt 64"1 64"

1 Lt 48"

8'0"

Prices are for each sidelight unit.

ADD this price to the steel or fiberglass door unit of choice for each sidelight

needed.

6'8" 1Lt 36" / Pnl3Lt 36" / Pnl

Flsh Glzd -1Lt/PnlS/L frames with Open S/L panel

- For decorative inserts*

NOTE: 14" fiberglass sidelight panels cannot be cut down to 12". If a needed 12" is not stock it may have to be special ordered.

1Lt 48" / Pnl1Lt 64" / Pnl

Flsh Glzd -1Lt/Pnl

* Add decorative inserts for complete sidelight unit

S/L frames with Open S/L panel - For decorative inserts* * Add decorative inserts for complete sidelight unit

1Lt 80"


of 306 9/28/20







FRAME SAVER Frame = Primed wood with composite bottom SidelitePF Frame = All Composite UnitPrimed = Primed FJ (no composite) 1-2/3-0/1-2

To LIST PriceFrameSaver Jambs 5-1/4" ADD $38 $54 $54FrameSaver Jambs 6-9/16" ADD 61 76 76FrameSaver Jambs 8-7/8" ADD 158 204 204Primed Frame (not FrameSaver) - 4-5/8"x6-8" (only) DEDUCT 26 28 28PF PRIMED Composite jamb 4-5/8" ADD 66 84 84PF PRIMED Composite jamb 5-1/4" ADD 96 124 124PF PRIMED Composite jamb 6-9/16" ADD 124 158 158PF TEXTURED Composite jamb 4-5/8" ADD 100 144 144PF TEXTURED Composite jamb 5-1/4" ADD 175 238 238PF TEXTURED Composite jamb 6-9/16" ADD 232 312 312Rip Charge - to cut down any stock exterior jamb to a specified width

ADD 25 25 40

Composite Jamb Extenders. For applied extender: ADD** $175 $204 $204

Spread mull on sidelight units - up to 4" ADD $108(standard mull is 1-1/2") per mull

Continuous Head and Sill on Triple or Quad units up to 12', that are greater than 1/-2/3-0/1-2 units. After all sill and frame options are applied. ADD $202

Some limitations and restrictions apply.

JAMBS

Single Unit

Double Unit

OPTIONS

* Ripped composite jambs will expose a rough, unfinished, edge. We do not recommend ripping tosize. Extenders from 3/8" to 2" can be applied to provide a more finished look.

Extend a 4 5/8" jamb from 5" to 6 5/8"

Extend a 5 1/4" jamb from 5 5/8" to 7 1/4"

Extend a 6 9/16" jamb from 6 15/16" to 8 9/16"

ADD this extender upcharge to the smooth or textured jamb needed.


of 306 9/28/20






OPTIONSSingle Double Sidelight

1 x 4 Primed FrameSaver (in lieu of WM180) ADD $32 $38 $381 x 4 Primed FrameSaver with WM180 ADD 67 81 811 x 4 PVC (in lieu of WM180) ADD 56 68 681 x 4 PVC with WM180 ADD 92 110 1105/4 x 4 S4S FrameSaver Csg (in lieu of WM180) ADD 68 84 845/4 x 4 S4S FrameSaver with WM180 ADD 94 112 1125/4 x 4 S4S PVC Csg (in lieu of WM180) ADD 88 116 1165/4 x 4 S4S PVC Csg With WM180 ADD 160 198 198PF Composite WM180 on FrmSvr frame ADD 34 42 42No Casing DEDUCT 28 32 32

Single Double Sidelight**Screw Type Adjustable Sill, Mill ADD $12 $22 includedScrew Type Adjustable Sill, Bronze ADD 20 39 $20ZAC Self Adjusting Sill, Mill ADD 20 41 19ZAC Self Adjusting Sill Bronze ADD 31 61 39RDS -Replaceable Deck Sill Mill - for 4-5/8" *** ADD 25 55 42RDS -Replaceable Deck Sill Bronze- for 4-5/8" *** ADD 44 87 74RDS -Replaceable Deck Sill Mill - for 6-5/8" *** ADD 40 77 80RDS -Replaceable Deck Sill Bronze- for 6-5/8" *** ADD 56 109 117Open out Bumper Sill, Mill ADD 23 40 132Open out Bumper Sill, Bronze ADD 34 61 152RDS -Replacfeable Deck- Open out Bumper Sill, Mill ADD 39 74 166RDS -Replaceable Deck- Open out Bumper Sill, Bronze ADD 50 95 186 1/2"ADA Sill, Mill (In or Out) ADD 13 16 45 1/2" ADA Sill, Bronze (In or Out) ADD 50 79 124No Sill DEDUCT -8 -15 na ** for sidelight units up to 1-2/3-0/1-2. (for larger sidelights see MISCELLANEOUS OPTIONS) *** NEW - RDS - Replaceable Deck sill. Note: This sill does not use extenders for wide jambs. Use the 6 5/8" option for 6" - 7" jambs .

***

Standard Fixed Sill Screw Type adjustable sill

RDS -Open In Replaceable Deck Sill

ZAC Articulating Sill *** Open In ADA

RDS -Open Out Replaceable Deck SillOpen Out Bumper Sill Open Out ADA

CASING

SILLS

Options continued on next page


of 306 9/28/20






OPTIONS

Single Double SidelightDeadbolt Bore ADD $10 $10 $10Viewer Bore ADD 24 24 24Non-removable-pin Hinge, primed ADD 6 10 6Premium Hinges ( standard is primed) ADD 4 8 8

4" x 4" Stainless Steel Hinges ADD 25 50 254" x 4" SPRING hinges (2 per door) ADD 32 32 ( SN -Satin Nickel, CB -Bronze, DC -Dull Chrome)

Premium finish NRP hinges - Special Order - ADD 20 40 20Ball Bearing Hinges in 15 or 11P ADD 33 66 33Door Only - No Frame , w/ hinges - 6-8 DEDUCT 160Door Only - No Frame , w/ hinges - 8-0 DEDUCT 223Cut down height - Fiberglass doors only ADD 130 260 310

For Wood Veneered Aluminum Push Bolt Astragal 6'8" 8'0"Fir or Mahogany Veneer ADD 116 129

For the Multipoint Aluminum Astragal with Flip LeverWhite ADD $333 $343

Fir or Mahogany Veneer ADD 436 448

Astragal Options - for Steel and Fiberglass Units

Standard astragal for steel and fiberglass units is the Ultimate Push Bolt White Astragal

The Multi-Point features patent pending lock pawls activated by the deadbolt to engage keepers in the active door, providing three

locking points. No deflection.

( Bright Brass, Dull Chrome, Antique Nickel, Satin Nickel, Antique Brass, or Colonial Bronze )

Some FiberGlass doors can be cut down in height. Limitations and restrictions apply. May void manufacturers warranty

MISCELLANEOUS OPTIONS


of 306 9/28/20






OPTIONSFor the Trilennium Multi-Point Lock 6'8" 8'0"

for Steel and Fiberglass door units

Trilennium 3000 Multi-Point Lock - For Double UnitTo Steel or Fiberglass Door Unit of Choice : 6'8" 8'0"

Series 3000 -Multipoint Hardware, Stainless Steel face plate with Compatible White Aluminum Astragal ADD $779 $867

Series 3000 - Multipoint Hardware, Bronze face plate with Compatible White Aluminum Astragal ADD $766 $854

Series 3000 -Multipoint Hardware, Stainless Steel face plate with Compatible Fir/Mahogany Veneer Astragal ADD $880 $978

Series 3000 - Multipoint Hardware, Bronze face plate with Compatible Fir/Mahogany Veneer Astragal ADD $866 $965

Trilennium 3000 Multi-Point Lock - For Single UnitTo Steel or Fiberglass Door Unit of Choice : 6'8" 8'0"

Series 3000 - Stainless Steel ADD $622 $704Series 3000 - Victorian Bronze ADD 609 692

A High Security Three-Point Lock System. See Section 13 for more information.

The interior and exterior trim, as well as matching strike plates are sold and shipped separately, to be

installed at the end of construction.

See Section 13 for Trillenium trim hardware


of 306 9/28/20






OPTIONS

20 Minute labels are available for our stock 6'8" 6 Panel Steel 4 Panel Steel 2 Panel Steel

Some special order Fiberglass doors are available for 20 minute labels.

20 Minute Label on stock* Steel Panel Door Units ADD: $466'8" stock steel doors only

20 Minute Label Fiberglass Panel Door Units -Special Order ADD: $175 6-8 doorsADD: $212 8-0 doors


20 Minute Label - For Steel Panel Doors and Units

For other stock designs on interior 20 minute molded panel doors see Section 4 -INTERIOR DOOR UNITS

We are certified to machine and label components for 20 - 90 minute labels for authorized manufacturers' products. Please send in a request for a quote.

Not all fibeglass designs are available in 20 minute. Please check with our office for availability. Special Order 20 minute FiberGlass doors may have an exteneded lead time of 6 - 8 weeks. Pricing includes special

order and machining charges.


of 306 9/28/20






OPTIONS

SDL provides endless possibilities in divided light appearance for the Flush Glazed Fiberglass Doors. Some suggestions are shown below.

For rectangular designs only. SDL BARS - 1/4" x 7/8" bars - applied per light $36SDL BARS - 3/8" x 1-1/4" bars - applied per light 40SDL BARS - 1/4" x - 3-1/2" bars - applied per light 60SDL BARS - 1/4" x 5" bars - applied per light 85

7/8" smooth 1 1/8" smoothLow profile for High profile forflush glazed flush glazed

flush glazed


Simulated Divided Light (SDL) for Flush Glazed or Doors with Inserts*

SDL bars cannot be painted a dark color

For rectangular designs only.

*On doors with inserts, the glass inserts are installed in the doors before the SDL bars are applied. SDL bars may limit the removal of inserts.

1 1/8" textured 1 1/4" smooth High profile for Flat for Direct textured Flsh Glzd Glazed 1 light

3 1/2" Wide Bar or 5 1/2" Wide BarSmooth Flat for

Direct Glazed 1 light


of 306 9/28/20







OPTIONS

Packaged with4-9/16" x 40" w/ 2 end caps $55.94 061-007

4-9/16" x 80" w/ 2 end caps 106.81 061-007

6-9/16" x 40" w/ 2 end caps 77.87 061-007

6-9/16" x 80" w/ 2 end caps 147.50 061-007

4-9/16" Extension Coupler 11.04 061-007For longer length pan components and end caps see Section 10.


TSFM42F 5.5" x 3.5' Flat 12/ctn $13.85 ea piece 061-003

TSFM65 5.5" x 6.5' Roll 12/ctn 20.65 ea roll 061-003

See other SureSeal Flashing products in section 10.

SureSill - For added protection against water infiltration


of 306 9/28/20






STEEL and FIBERGLASS DOOR UNIT - Transoms

One light or Divided light with SDL bars Paint Grade

SIZE LIGHT Price LIGHT with 7/8" SDL bar

2-0 x 1-0 1 $241 2 $281 082-011

2-4 x 1-0 1 276 2 316 2-6 x 1-0 1 276 2 3162-8 x 1-0 1 304 3 3643-0 x 1-0 1 311 2 3514-0 x 1-0 1 399 3 4595-0 x 1-0 1 481 2 5215-3 x 1-0 1 485 3 5455-4 x 1-0 1 485 4 565 5-7 x 1-0 1 521 5 6216-0 x 1-0 1 528 5 628

For Primed transom frame : up to 6-9/16 b: ADD $45For PF Composite transom frame : up to 4-9/16" ADD 62For PF Composite transom frame : up to 6-9/16" ADD 128

For PF TEXTURED Composite transom frame : up to 4-9/16" ADD 105For PF TEXTURED Composite transom frame : up to 6-9/16" ADD 237

See next page for custom size transom frames, glass, and sash.For stock transom, sash only, pricing, see page 24 in section 4B.

One Light

Transoms

Specifications: Wood Transom Unit Frames -PRIMED Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Insulated paint grade sash.

SDL Muiti-light

Stock Rectangular Transom Units with Clear Insulated Sash

Rough Opening height for Door Unit with Transom:

ADD:

Transom frame height, 1'1-1/2" (13-1/2") to

door unit rough opening.


of 306 9/28/20






up to:2-8 x 2-0 $101 $162 $2063-0 x 2-0 101 162 2064-0 x 2-0 132 220 2705-0 x 2-0 148 246 2975-4 x 2-0 151 260 308

OPTIONS: 6-0 x 2-0 152 262 308For Jambs up to 6-9/16" : ADD $45 $67 $131

SDL (simulated divided lights) are available for transoms

Add Glass price to Open Transom Frames aboveper Square Foot -LIST

3/16" Single Glass $21Clear Isul Glass $36Low E Insul Glass $46

Example: Clear insulated glass for a 3'6" x 1'8" transom frame :42 20 840 sq in

144 5.8 sq ftRounded up to 6 sq ft $126

Add to open transom frame aboveSDL (simulated divided lights) are available for transoms

Add Sash price to Open Transom Frames above

per Square Foot -LIST

Paint Grade Sash

Fir, Stain Grade Sash

Wood transom sash with: per Square Foot -LIST1/8" Single Glass $61 $75Clear Isulated Glass $68 $78Low E Insul Glass $92 $105

Example: Glazed Transom Sash with insulated glass for a 3'0" x 1'2" transom frame :36 14 504 sq in

144 3.5 sq ftRounded up to 4 sq ft $272

Add to open transom frame above

To price glass: take width x height (inches), and divide by 144 = Square feet of glass

needed. Round that up to next whole number. Multiply

by glass square foot price.

Direct Set Glass - for Open Transom Frames

$21

$68

PF TEXTURED Composite

All Prices are LIST.

Special Size Glazed Transom Sash - for Open Transom Frames

To price Glazed transom sash: width x height (inches), and divide by 144 =

Square feet of sash needed. Round that up to next whole number.

Multiply by Transom Sash square foot price.

Specifications: Wood Transom Unit Frames -Rabbeted jambs. 1-1/4" x 2" WM 180 All Purpose Brick Mould. 1-1/2" Transom mull. Stops furnished for transom sash.

PRIMEDPF

PRIMED Composite

Open Frames

Rectangular Transom Frames - open


of 306 9/28/20






5' 4" Direct Glazed - 4 Lt -Spoke - For 1-0/3-0/1-0 Unit

O/S jamb to O/S jamb = 64-1/2" x 25-1/2"

4 9/16 " FJ Jambs - Primed WM180 Casing-

5' 0" Direct Glazed - 4 Light - For 5-0 (dbl 2-6) UintO/S jamb to O/S jamb = 62" x 16-1/2"

4 9/16 " Paint Grade or Clear Fir WM180 Casing- Primed Sill Nosing

$1,810082-040

$2,430082-040

$1,790

Paint Grade

Paint grade

082-040

SEGMENT, ELLIPTICAL, & HALF CIRCLE TRANSOMS

SEGMENT TRANSOM UNIT

A variety of transom designs and sizes are available by Special Order. Please send in your design and details for a quote.

SPECIAL ORDER TRANSOMS

Paint Grade Stain Grade Fir


of 306 9/28/20





Plastpro Trimmable Fiberglass Doors

Model LIST PRICEPrice for door only.

Full size Add door to frame from Section 4B..

DRG61T 36" x 80" Textured 6 Panel $535

DRS61T 36" x 80" Smooth 6 Panel $458Pricing for door only.

For standard door light / insert cut-out $60.00For shop trimming of door (within specs below) $80.00For door bottom sweep $11.60

Trim up to 1" from each composite stile, 1/2" from top rail and 1-1/2" from bottom rail to fit an existing

entryway without any reconstruction.

Ideal for fitting existing openings.


of 306 9/28/20





SPECIFICATIONS:

Center Hinged Side Hinged w/ center mull w/ Astragal

Net Door size: Nominal 2/6 = 29 9/16" x 77"

Nominal 3/0 = 34 9/16" x 77"

SUGGESTED

ROUGH Outside jamb LIST PRICE SIZE OPENING to outside jamb I LIGHT 15 LIGHT

CENTER HINGED SWING UNIT - 1 Door Fixed With 1" Mull Post5-0 x 6-8 2-door 60-5/16" x 80" 59-15/16" x 79-3/4" $1,332 $1,356

6-0 x 6-8 2-door 72-5/16" x 80" 71-15/16" x 79-3/4" $1,375 $1,399

DOUBLE SIDE HINGE UNIT - Both Doors Operating With Astragal A retrofit sized double unit with both doors operating, open in, with Ultimate Aluminum Astragal with H&F bolts.

5-0 x6-8 2-door 60-5/16" x 80" 59-17/32" x 79-3/4" $1,542 $1,566

6-0 x 6-8 2-door 72-5/16" x 80" 71-17/32" x 79-3/4" $1,585 $1,609

This ia a RH, Center Hinged, inswing, as viewed form outside.

SMOOTH FIBERGLASS -UNDERSIZED

Insulated Smooth Fiberglass, Center Swing Patio Door Unit in a Retrofit Size to use as a Replacement Unit or in New Construction.

Smooth Fiberglass door with one light or fifteen light insulated insert, 1-1/4" x 4-9/16" single rabetted FRAME

SAVER jambs,1-1/4" x 2" primed FJ WM 180 casing, compression weatherstrip, aluminum sill.


of 306 9/28/20






Western Reflections Decorative Glass Units

For other options see OPTIONS pages in this section. All prices are LIST.

St. Charles

Stainable Insert Frame

Steel Smooth Fiberglass

Textured Fiberglass

Insert UsedInsert Only Door Style Unit Size

STC-P 2248-SST $627 2/3 Lite 3-0 x 6-8 $1,062 $1,145 $1,219STC-P 2248-SST 2/3 Lite 6-0 x 6-8 2,143 2,309 2,458STC-P 0848-SST 331 2/3 Sidelite 1-0 or 1-2 x 6-8 728 812 898STC-P 2264-SST 786 Full Lite 3-0 x 6-8 1,169 1,279 1,389STC-P 2264-SST Full Lite 6-0 x 6-8 2,359 2,579 2,798STC-P 2248-SST 2/3 Lite - 8-0** 3-0 x 8-0 1,282 1,485 1,573STC-P 2248-SST 2/3 Lite - 8-0** 6-0 x 8-0 2,584 2,990 3,166STC-P 2264-SST 3/4 Lite - 8-0 3-0 x 8-0 ns 1,794 2,027STC-P 2264-SST 3/4 Lite - 8-0 6-0 x 8-0 ns 3,608 4,074

** in Smooth FbrGls the 2/3 Lt 8-0 is stocked with a 1 or 2 panel bottom

Specifications: FRAME SAVER Frame - primed finger-jointed, with composite bottom jambs. Beige Q-Lon compression weatherstrip. 1-1/4" x 2" primed finger-jointed WM 180 Frame Saver Brick Mould. High-dam aluminum sill with vinyl threshold cap. 1-1/2 pair primed 4 x 4 hinges. Ultimate Aluminum astragal with head and foot bolts on doubles (Flip Lever on 8-0).

Clear Bevels with Clear SoftWave and Double Glue

Chip Glass. Patina Caming.

St. Charles


of 306 9/28/20




Section 5 Page 1 Effective:September 21, 2020

MAHOGANY Doors and Sidelights

LIST PRICE code

Door Only Single DoubleUnit* Unit*

D 3-0 x 6-8 x 1-3/4 2/3 Lite Mahogany $1,397 $1,855 $3,658 001-055

D 3-0 x 8-0 x 1-3/4 3/4 Lite Mahogany $1,588 $2,160 $3,900 001-055

Elegant Glass Doors and Entryways

A beautiful Mahogany door with raised moulding that enhances both the glass panel and the bottom raised panels. The insulated glass panel features the clear beveled Fleur de Lis surrounded by clear Waterglass. The outside boarder is a

clear Granite textured glass with an inner border of clear beveled panels, all with a Patina caming.

* Unit price with Mahogany 4-9/16 Jamb, brick mould, bronze sill. Double unit with basic mahogany Astragal.

See section 4B for pricing of Mahogany, Fir, or Primed frames as well as other frame options. for a complete unit.


of 306 9/28/20






6 Light with Clear Insulated LowE Beveled Glass

LIST PRICE5-0 x 8-0 6 Lt French Manor $3,082.87

Side 5080 mahogany 3-1/2" inside casing $375.25

For alternate Endura Mahogany Veneer Aluminum Ultimate Astragal: - Ultimate Aluminum / Mahogany veneer astragal ADD $73.00

For Trilennium Multi-Point Lock* - installed ADD $977.80


French Manor Mahogany Door Unit

Unit Consist of: Pair of 2'-6" x 8'-0" x 1-3/4" TDL Segment Head Mahogany Doors with 7/8" muntins. Up to 6-9/16" Mahogany weather-stripped jambs with matching Brick Mold outside casing. Mahogany, weather-stripped T-Astragal, with Head & Foot Bolts. Set up

with Bronze adjustable sill, 4"x4" Bronze Hinges.

* The interior and exterior trim, as well as matching strike plates for the Trilennium Multipoint are sold and shipped separately, to be installed at the end of construction.


of 306 9/28/20






3'0" x 8'0" 3'6" x 8'0"

6 Light with Clear Insulated LowE Beveled Glass

LIST PRICE3-0 x 8-0 6 Lt Arch Top with 4-9/16" jamb* $2,401 001-055

3-6 x 8-0 6 Lt Arch Top with up to 6-9/16" jamb $3,047

For up to 6-9/19" jamb on 3-0 x 8-0 unit ADD $196

Side 3-0x8-0 Mahogany 3-1/2" inside casing $323Side 3-6x8-0 Mahogany 3-1/2" inside casing $323

For Trilennium Multi-Point Lock* - installed ADD $704

* The interior and exterior trim, as well as matching strike plates for the Trilennium Multipoint are sold and shipped separately, to be installed at the end of construction.

Unit consist of: 3'-6" or 3'0" x 8'-0" x 1-3/4" TDL Segment Head Mahogany Door with with applied raised moulding on exterior side" Mahogany, weather-stripped, jambs with matching

Brick Mold outside casing. Set up with Bronze adjustable sill, 4"x4" Bronze Hinges

Arch Top Single - Mahogany Door Unit



of 306 9/28/20






1-3/4" MAHOGANY DOORS

504 506

Beveled LowE Insulated GlassLIST PRICE

Single DoubleDoor Only Unit* Unit*

504 - 4Lt Mahogany2-6 x 6-8 x 1-3/4" 4 Lite $1,096 $1,554 $3,056 001-055

2-8 x 6-8 x 1-3/4" 4 Lite 1,096 1,554 3,0563-0 x 6-8 x 1-3/4" 4 Lite 1,096 1,554 3,056

506 - 6Lt Mahogany2-6 x 8-0 x 1-3/4" 6 Lite $1,315 $1,886 $3,6442-8 x 8-0 x 1-3/4" 6 Lite 1,315 1,886 3,644 001-055

3-0 x 8-0 x 1-3/4" 6 Lite 1,315 1,886 3,493

6 Panel Mahogany3-0 x 6-8 x 1-3/4 6 PANEL $857 $1,428 $2,728 001-055

With Decorative Raised Moulding Surrounds on exterior side

* Unit price with Mahogany 4-9/16 Jamb, brick mould, bronze sill. Double unit with basic mahogany Astragal.

See section 4B for pricing of Mahogany, Fir, or Primed frames as well as other frame options. for a complete unit.


of 306 9/28/20





1-3/4" Fir DoorsMODEL SIZE DESCRIPTION LIST PRICE

1-3/4" FIR Simpsom Performance Series with UltraBlock

Many of our stock Simpson Doors feature UltraBlock Technology.

What is UltraBlock Technology?Maximum protection against extreme weather conditionsComposite block material finger-jointed into the bottom of the stiles eliminates water infiltrationMinimizes stile and rail separationEliminates bottom rail and lower stile rotReduces buckling and swelling of bottom rail and lower stile componentsImproves warp resistanceBeautiful genuine woodFive year limited warranty

The stock doors with UltraBlock are indicated in the next pages.


of 306 9/28/20







List PriceSingle Double

7002 1Lt. Insulated Door Only Unit* Unit*w/ UltraBlock 1-6 X 6-8 X 1-3/4 * $596 $842 $1,751 001-050

2-0 X 6-8 X 1-3/4 * 596 842 1,7512-6 x 6-8 x 1-3/4 * 640 885 1,8372-8 x 6-8 x 1-3/4 * 640 885 1,8373-0 x 6-8 x 1-3/4 * 640 885 1,837

2-6 x 8-0 x 1-3/4 * $891 $1,238 $2,506 001-050

2-8 x 8-0 x 1-3/4 * 891 1,238 2,5063-0 x 8-0 x 1-3/4 * 891 1,238 2,506

* Doors with UltraBlock have

Simpson's unlimited 5 Year warranty. See the UltraBlock information on

this page.

1 Light Insulated

The 7002 doors, 2-0 to 3-0 widths,available with 5-1/2" stiles to

accommodate most hardware. The 1-6 wide has 4-1/2" stile.

These doors can be multi-light customized with Simulated Divided Light, SDL. See next

pages for more information.

* Nominal size - Doors are stocked prefit for units. 1/4" less in width, and 1" less in height.

* Unit price with Fir 4-9/16 Jamb,(5-1/4 on 8-0) brick mould, fixed mill sill. Double unit with basic Fir Astragal.

See section 4B for pricing of FrameSaver, Composite, or primed frames as well as other frame options for a complete unit.


of 306 9/28/20







* See the UltraBlock information on page 7.

List Price7501 1Lt. / Panel Single Double

w/ UltraBlock Insulated Door Only Unit* Unit*2-0 x 6-8 x 1-3/4 * $1,061 $1,307 $2,681 001-050

2-6 x 6-8 x 1-3/4 * 1,061 1,307 2,6812-8 x 6-8 x 1-3/4 * 1,061 1,307 2,6813-0 x 6-8 x 1-3/4 * 1,061 1,307 2,681

2-0 x 8-0 x 1-3/4 * $1,211 $1,558 $3,1477501 2-6 x 8-0 x 1-3/4 * 1,211 1,558 3,147

w/ UltraBlock 2-8 x 8-0 x 1-3/4 * 1,211 1,558 3,147Insulated 3-0 x 8-0 x 1-3/4 * 1,211 1,558 3,147

These doors can be customized with Simulated Divided Light, SDL. See next page.

1 Light Insulated / Raised Panel

Pricing for Doors and Sidelight Panels only. Add to frames in 4B for a complete unit.

The 7501 doors have 5-1/2" stiles to accommodate

most hardware.

* Nominal size - Doors are stocked prefit for units. 1/4" less in width, and 1" less in height.


See section 4B for pricing of FrameSaver, Composite, or primed frames as well as other frame options. for a complete unit.


of 306 9/28/20







Simulated Divided Light (SDL) for Fir Insulated Glass DoorsSDL provides endless possibilities in divided light appearance for the Insulated Glass Fir Doors. Some suggestions are shown below.

SDL BARS - 7/8" Fir SDL bars - applied. - Per Light $36SDL BARS - 1-3/8" Fir SDL bars - applied. - Per Light $40

7501 doors with SDL bars

7002 doors with SDL bars


of 306 9/28/20








504 4 Lt. / 1 Panel Door Only Unit* Unit*2-6 x 6-8 x 1-3/4 * $649 $894 $1,8552-8 x 6-8 x 1-3/4 * 649 894 1,8553-0 x 6-8 x 1-3/4 * 649 894 1,855

1802 2 Lt. / 1 Panel sidelight1-0 x 6-8 x 1-3/4 $4701-2 x 6-8 x 1-3/4 470

506 6 Lt. / 1 Panel2-6 x 6-8 x 1-3/4 * $649 $894 $1,8552-8 x 6-8 x 1-3/4 * 649 894 1,8553-0 x 6-8 x 1-3/4 * 649 894 1,855

1803 3 Lt. / 1 Panel sidelight1-0 x 6-8 x 1-3/4 $6381-2 x 6-8 x 1-3/4 638

4 & 6 Light over panel

6'8"



* Nominal size - Doors are stocked

prefit for units. 1/4" less in width,

and 1" less in height.


of 306 9/28/20








504 - 8' 4 Lt. / 1 Panel Door Only Unit* Unit*2-6 x 8-0 x 1-3/4 * $751 $1,098 $2,2272-8 x 8-0 x 1-3/4 * 751 1,098 2,2273-0 x 8-0 x 1-3/4 * 751 1,098 2,227

1802 - 8' S/L 2 Lt. / 1 Panel1-2 x 8-0 x 1-3/4 $614

506 - 8' 6 Lt. / 1 Panel2-6 x 8-0 x 1-3/4 * $751 $1,098 $2,2272-8 x 8-0 x 1-3/4 * 751 1,098 2,2273-0 x 8-0 x 1-3/4 * 751 1,098 2,227

1803 - 8' S/L 3 Lt. / 1 Panel1-2 x 8-0 x 1-3/4 $635



4 & 6 Light over panel

8'0"





of 306 9/28/20








1505 5 Lt. French Door Only Unit* Unit*1-6 X 6-8 X 1-3/4 * $360

1510 10 Lt. French2-0 X 6-8 X 1-3/4 * $571 $817 $1,701

1515 15 Lt. French2-6 x 6-8 x 1-3/4 * $582 $828 $1,7232-8 x 6-8 x 1-3/4 * 582 828 1,7233-0 x 6-8 x 1-3/4 * 582 828 1,723

1508 8 Lt. French2-0 X 6-8 X 1-3/4 * $527 $772 $1,6122-6 x 6-8 x 1-3/4 * 548 793 1,6542-8 x 6-8 x 1-3/4 * 548 793 1,6543-0 x 6-8 x 1-3/4 * 548 793 1,654

* Unit price with Fir 4-9/16 Jamb, brick mould, fixed mill sill. Double unit with basic Fir Astragal.


Full Divided Light French





of 306 9/28/20






1-3/4" FIR Simpsom Performance Series with UltraBlock1-3/4" FIR CRAFTSMAN Series

6801 6801 6801 68011 Lt w/ 2Lt w/ 3Lt w/ 6Lt

SLD SLD SLD

1-3/4" CRAFTSMAN SERIES - Clear Select Fir with 3/4" VG Flat Panels clear insulated glass. With UltraBlock construction for added protection.


6801 1 Lt IG / 2 Flat Pnl Door Only Unit* Unit*3-0 x 6-8 x 1-3/4 $1,347 $1,593 $3,253

6801 SDL / 2 Flat Pnl2Lt 3-0 x 6-8 x 1-3/4 $1,419 $1,665 $3,3973LT 3-0 x 6-8 x 1-3/4 1,455 1,701 3,4696LT 3-0 x 6-8 x 1-3/4 1,563 1,809 3,685







of 306 9/28/20






1-3/4" FIR Simpsom Performance Series with UltraBlockFir Utility Doors and Sidelights

Panels are 3/4" thick, Split-proof, "engineered" panels.


944 9 Lt.sgl glz / 2 Panel Door Only Unit* Unit*2-8 x 6-8 x 1-3/4 $740 $985 $2,0383-0 x 6-8 x 1-3/4 740 985 2,038

7044 1 Lt. IG / 2 Panel2-8 x 6-8 x 1-3/4 $814 $1,060 $2,1873-0 x 6-8 x 1-3/4 814 1,060 2,187

1-3/8" Fir Side Lights1703 SSB 3Lt/Pnl 1-0 X 6-9 X 1-3/8 $361

1705 SSB 5Lt 1-0 X 6-9 X 1-3/8 3501702 IG 1Lt/Pnl 1-0 X 6-9 X 1-3/8 485

1701 IG 1Lt 1-0 X 6-9 X 1-3/8 509







of 306 9/28/20







1-3/4" FIR Exterior Traditiional Series


2130 Colonial 6 Panel Door Only Unit* Unit*3-0 x 8-0 x 1-3/4 $998 $1,243 $2,554

2-6 x 6-8 x 1-3/4 $711 $957 $1,9812-8 x 6-8 x 1-3/4 711 957 1,9813-0 x 6-8 x 1-3/4 711 957 1,9813-0 x 7-0 x 1-3/4 764 1,009 2,086

2044 Four Panel3-0 x 6-8 x 1-3/4 $711 $957 $1,981







of 306 9/28/20





1-3/4" EXTERIOR FLUSH DOORS

LISTDescription Size PRICE

BIRCH - SOLID CORE with 2-5/8" top & bottom wood rails2-0 x 6-8 x 1-3/4" $228 BIRXS2-4 x 6-8 x 1-3/4" 2322-6 x 6-8 x 1-3/4" 2322-8 x 6-8 x 1-3/4" 2383-0 x 6-8 x 1-3/4" 2433-0 x 7-0 x 1-3/4" 343 BIRXS7

BIRCH - HOLLOW CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" $166 BIRX2-6 x 6-8 x 1-3/4" 1742-8 x 6-8 x 1-3/4" 1773-0 x 6-8 x 1-3/4" 183

1-3/8" LAUAN -SOLID CORE with 2-1/4" top & bottom wood rails2-8 x 6-8 x 1-3/8" $209 LAUS

LAUAN -SOLID CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" $179 LAUXS2-4 x 6-8 x 1-3/4" 1902-6 x 6-8 x 1-3/4" 1902-8 x 6-8 x 1-3/4" 1963-0 x 6-8 x 1-3/4" 2013-0 x 7-0 x 1-3/4" 275 LAUXS7

LAUAN - HOLLOW CORE with 2-1/4" top & bottom wood rails2-0 x 6-8 x 1-3/4" $121 LAUX2-4 x 6-8 x 1-3/4" 1292-6 x 6-8 x 1-3/4" 1292-8 x 6-8 x 1-3/4" 1323-0 x 6-8 x 1-3/4" 137

See Section 4-b for Exterior frames in clear fir or paint-grade fingerjoint to make complete units.


of 306 9/28/20





1-3/4" EXTERIOR FLUSH DOORSSee Section 4-b for Exterior frames in clear fir or paint-grade fingerjoint to make

complete units.

INSERTS FOR FLUSH BIRCH OR LAUAN DOORS- Special Order Only

Description

Inserts Only20 x 24 - 1 Lt 1-3/4"

20 x 24 - 2 Lt 1-3/4" 6 x 10 1-3/4" 10 x 10 -1 Lt 1-3/4"

12 x 12 Louver 1-3/8"20 x 12 Louver 1-3/8"

Non-StockSpecial OrderOnly

Vision inserts are single glazed, with basswood

frames.

Louver inserts are made from basswood.

Louvers are chevron, v-slat, design.


of 306 9/28/20





Pet DoorsDescription Size LIST PRICE Product Code

PetSafe - Panel Pet Door Insert

Easy installation with no framing materials requiredPaint-ready and raised mould designDual flexible, tinted vinyl flapsInternal ribs add strength for everyday pet useWeather-resistance designLimited travel magnets for quick flap connectionPaintable finishing plugs includedFlap opening size10 1/8" W x 16 1/2" HSnap-on closing panel included

Two doors in one - dual-rise options of 8" or 10 1/2" **

May be installed lower in somedoors to create a lower rise.

24.53" x 3.54" x 27.72" Insert only 418.00$ Installation (for this insert only) 60.00

Cut out for other pet door - with customer 130.00$ supplied template

(Restrictions may apply, depending on door type, size, etc.)

Note:

** Approximate from opening to floor. Rise dimension depends on the bottom rail of the

steel, fiberglass, or wood door used.

Due to the variety of size and construction of some of the pet doors on the market, we will only install our stock pet door. We can

provide a cut out for other doors, only if a template, and location information are provided.

The PetSafe Panel Pet Door Insert compliments most 2'8", 2'10", and 3'0' steel and fiberglass doors with basic 6-panel, 4-panel, and 2-panel

designs. Customize flat doors, metal doors, fiberglass doors, wood doors or 22" x 36" glass top doors with a Paneled Pet Door Insert to

create a polished and professional look for today's home.


of 306 9/28/20





Pet Doors



of 306 9/28/20




Section 6 Page 1Effective: September, 2020

PlyGem VINYL SHUTTERS

********

Color samples are available from this office.

1 Pair/Ctn. LIST PRICE

15" wide 15" wide height 15" wide 15" wide

$59.65 na 25" na na64.93 $80.58 31" $96.38 $101.1867.84 85.63 35" 101.47 105.4773.09 90.85 39" 106.59 118.3073.60 94.08 43" 112.74 123.6278.34 98.37 47" 118.88 148.1982.72 103.07 51" 125.02 156.74102.62 107.87 55" 131.17 159.94106.98 117.86 59" 137.31 166.37111.33 124.13 63" 143.46 173.86115.68 134.94 67" 149.60 181.31120.03 137.31 67" cottage na na124.38 139.26 71" 155.74 189.86

Louver 128.74 144.80 75" 161.89 199.49 Open

133.09 157.63 81" 168.16 213.34 Board & Batten

Closed

Panel Board & Batten

Closed Board & Batten

Open Board & Batten

Louvered Raised Panel

per pair per pair

Products shown are the 15" wide shutter, Many other standard and custom sizes from 12" wide to 96" tall are available. Please check with our office for information.

PlyGem shutters add value and quality to any style home… at an affordable price.

Delivery in 7 to 10 days.Freight Prepaid

These are available by Special Order

High-pressure injection molded construction provides exceptional strength and durability.Available in Louvered, Raised Panel, Open or Closed Board & Batten, featuring the rich texture and Choose from 14 different lengths to fit a broad range of window openings.Add a distinctive look of elegance with available quarter radius and transom top shutter extensions.

Non-Stock - Special OrderNormal Delivery in 7 - 10 Days.

Available in 19 Classic Colors Black * Blackwatch Green * Brown * Coastal Blue * Dark Berry * Dark Navy * Dark Spruce * Green * Grey * Pebblestone Clay * Peppercorn * Red * Sand Dollar * Spanish Moss * Terra

Brown * Vineyard Red * White * Winstone

15" Wide, High-Density Copolymer Baked on

Acrylic Finish


of 306 9/28/20





Blank


of 306 9/28/20





These custom made accordian doors come in a varity of series, with finishes, and sizes to meet the need form small residential applications to large commercial doors that can be used as room dividers.

Your Dyke Industries representative can help with your specifications to quote these products. See the WOODFOLD product brochure for more specifications.


of 306 9/28/20







of 306 9/28/20

Don

Typewritten Text





Section 10 Page 1Effective: February 11, 2020

DOOR UNIT COMPONENTS - SILLS & ASTRAGALSModel Application LIST PRICE Code

Size Jamb

Z-Series RDS - Replaceable Deck Sill - Inswing - Single & Double

5-5/8" sill for 4-9/16" jamb Screw Type, Adjustable, Black Cap

2-8 MF 4-9/16" RDS I/S ADJ ALUM SILL Mill finish $53.02 061-011

3-0 MF 4-9/16" RDS I/S ADJ ALUM SILL 56.785-0 MF 4-9/16" RDS I/S ADJ ALUM SILL 116.896-0 MF 4-9/16" RDS I/S ADJ ALUM SILL 123.62

2-8 BRZ 4-9/16" RDS I/S ADJ ALUM SILL Bronze finish $70.47 061-011

3-0 BRZ 4-9/16" RDS I/S ADJ ALUM SILL 72.725-0 BRZ 4-9/16" RDS I/S ADJ ALUM SILL 151.786-0 BRZ 4-9/16" RDS I/S ADJ ALUM SILL 155.46

14"/3-0/14" MF 4-9/16" RDS I/S ADJ ALUM SILL, 1.5" MULLS $133.5114"/3-0/14" BRZ 4-9/16" RDS I/S ADJ ALUM SILL, 1.5" MULLS 165.36

7-5/8" sill for 6-9/16" jamb Screw Type, Adjustable, Black Cap 061-011

3-0 MF 6-9/16" RDS I/S ADJ ALUM SILL Mill finish $68.556-0 MF 6-9/16" RDS I/S ADJ ALUM SILL 145.94

3-0 BRZ 6-9/16" RDS I/S ADJ ALUM SILL Bronze finish $84.61 061-011

6-0 BRZ 6-9/16" RDS I/S ADJ ALUM SILL 177.34

14"/3-0/14" MF 6-9/16" RDS I/S ADJ ALUM SILL, 1.5" MULLS Mill $171.37 061-011

14"/3-0/14" BRZ 6-9/16" RDS I/S ADJ ALUM SILL, 1.5" MULL Bronze 208.41

Endura Products New Replaceable Deck Sill Brochure

The Replaceable Deck Sill™ [RDS] is the sill of the future, enabling replacement of a discolored or damaged sill deck

without removing the sill or the entire door unit.


of 306 9/28/20







Size Jamb

5-5/8" Z-Series Articulating Cap - Inswing - Single & DoubleWith Protective Sill Cover 1-3/8" high 5-5/8" wide for 4-5/8" jamb

Dark Walnut threshold cap ZAC-FN 5-5/8" MILL 29-7/8" 2-6 $46.14 061-011

ZAC-FN 5-5/8" MILL 31-7/8" 2-8 38.46ZAC-FN 5-5/8" MILL 35-7/8" 3-0 48.64ZAC-LFN 5-5/8" MILL 48-3/8" 4-0 117.19ZAC-FN 5-5/8" MILL 60-3/8" 5-0 102.89ZAC-FN 5-5/8" MILL 64-3/8" 5-4 102.89ZAC-FN 5-5/8" MILL 72-3/8" 6-0 109.02

ZAC-FN 5-5/8" BRZ 31-7/8" 2-8 $55.82 061-011

ZAC-FN 5-5/8" BRZ 35-7/8" 3-0 59.72ZAC-LFN 5-5/8" BRZ 48-3/8" 4-0 132.45ZAC-FN 5-5/8" BRZ 60-3/8" 5-0 122.97ZAC-FN 5-5/8" BRZ 60-7/8" For 5-0 French Manor 122.97ZAC-FN 5-5/8" BRZ 64-3/8" 5-4 122.97ZAC-FN 5-5/8" BRZ 72-3/8" 6-0 129.38

5-5/8" Z-Series Articulating Cap -Inswing - Continuous Sidelight

MZAC-FN 5-5/8" MILL 62-15/16" 1-0/3-0/1-0 $105.69 061-011

MZAC-FN 5-5/8" MILL 66-15/16" 1-2/3-0/1-2 110.20MZAC-FN 5-5/8" BRZ 66-15/16" 1-2/3-0/1-2 130.56

with sidelight seat


of 306 9/28/20






Size Jamb

5-5/8" Z-Series Screw Type Adjustable Cap - Inswing

ZAI L-FN 5-5/8" MILL 31-15/16" 2-8 $35.75 061-011

ZAI L-FN 5-5/8" MILL 35-15/16" 3-0 37.81 ZAI L-FN 5-5/8" MILL 60-3/8" 5-0 82.20 ZAI L-FN 5-5/8" MILL 72-3/8 6-0 87.28

ZAI L-FN 5-5/8" BRZ 31-15/16" 2-8 $45.43ZAI L-FN 5-5/8" BRZ 35-15/16" 3-0 48.89 ZAI L-FN 5-5/8" BRZ 60-3/8" 5-0 102.28 ZAI L-FN 5-5/8" BRZ 72-3/8 6-0 107.64

Cut to order Z-Series Adjustable Cap Sills 24" - 35.5"ZAI L-FN 5-5/8" MILL $56.73ZAI L-FN 5-5/8" BRZ 69.96

specify exact opening size

5-5/8" Sill Base - No Caps - For use on units over 6-0 wide

ZAIL56DMF120NC Mill sill base 149" $167.60ZAIL56DBF120NC Brz sill base 149" 201.20

Sample Custom combinations

Sill for a Triple Unit - single swing door with two fixed, as sidelightsup to 3-0 / 3-0 / 3-0 oxo MILL $295.77 custom

up to 3-0 / 3-0 / 3-0 oxo BRZ 337.77 custom

Sill for a Quad Unit - double swing doors with two fixed, as sidelightsup to 3-0 / 6-0 / 3-0 oxxo MILL $318.23 custom

up to 3-0 / 6-0 / 3-0 oxxo BRZ 360.23 custom

Blank sill base for up to 12' units.

We add the sill caps, sidelight seats, and end gaskets to custom make up various size units

Sill base with 1ea 3-0 operating cap and 2

fixed caps

Sill base with 1ea 6-0 operating cap and 2

fixed caps


of 306 9/28/20






Size Jamb

5-5/8" Fixed Inswing High-Dam Sill with Vinyl CapWith Protective Sill Cover 1-3/8" high 5-5/8" wide

Brown vinyl threshold cap.HFI 5-5/8" MILL 31-15/16" 2-8 $26.67 061-011

HFI 5-5/8" MILL 35-15/16" 3-0 28.45 HFI 5-5/8" MILL 48-3/8" 4-0 73.38 HFI 5-5/8" MILL 60-3/8" 5-0 64.16 HFI 5-5/8" MILL 72-3/8" 6-0 68.46

4-5/8" Z-Series Fixed Open Out Bumper Sill Operating / Fixed

MZOB4565 4-5/8" MILL 2-6/2-6 61-13/16" $116.56

4-5/8" Fixed Inswing High-Dam Sill with Vinyl Cap

HFI 4-5/8" MILL 31-15/16" 2-8 $26.07


of 306 9/28/20






Size Jamb

5-5/8" Z-Series Fixed Open Out Bumper Sill With Protective Sill Cover 1-3/8" high 5-5/8" wide with 1/4" Horn

Dark Walnut threshold cap ZOB-FEN 5-5/8" MILL 39-15/16" 2-6 $48.49 061-011

ZOB-FEN 5-5/8" MILL 31-15/16" 2-8 48.49 ZOB-FEN 5-5/8" MILL 35-15/16" 3-0 51.41 ZOB-FN 5-5/8" MILL 48-3/8" 4-0 119.19 ZOB-FN 5-5/8" MILL 60-3/8"" 5-0 104.87 ZOB-FN 5-5/8" MILL 72-3/8" 6-0 108.65

ZOB-FEN 5-5/8" BRZ 29-15/16" 2-6 $58.17 061-011

ZOB-FEN 5-5/8" BRZ 31-15/16" 2-8 58.17 ZOB-FEN 5-5/8" BRZ 35-15/16" 3-0 62.47 ZOB-FN 5-5/8" BRZ 48-3/8"" 4-0 139.27 ZOB-FN 5-5/8" BRZ 60-3/8"" 5-0 124.97 ZOB-FN 5-5/8" BRZ 72-3/8" 6-0 129.01

5-5/8" RDS - Replaceable Deck - Fixed Open Out Bumper Sill With Protective Sill Cover 1-3/8" high 5-5/8" wide with 1/4" Horn

Black threshold cap

ZOB B 56 RDS 5-5/8" MILL 31-15/16" 2-8 $62.18 061-011

ZOB B 56 RDS 5-5/8" MILL 35-15/16" 3-0 67.40 ZOB B 56 RDS 5-5/8" MILL 60-3/8"" 5-0 136.08 ZOB B 56 RDS 5-5/8" MILL 72-3/8" 6-0 142.67

ZOB B 56 RDS 5-5/8" BRZ 31-15/16" 2-8 $71.86ZOB B 56 RDS 5-5/8" BRZ 35-15/16" 3-0 78.37 ZOB B 56 RDS 5-5/8" BRZ 60-3/8"" 5-0 156.16 ZOB B 56 RDS 5-5/8" BRZ 72-3/8" 6-0 163.12


of 306 9/28/20






Size Jamb

Sill Accessories

WALNUTZAC 3-0 Replacement Articulating Cap $14.64ZAC 6-0 Replacement Articulating Cap 32.61

ADJUSTABLE Screw SILL CAP 36.5" open in $11.92ADJUSTABLE Screw SILL CAP 74" open in 25.64

SCREW HOLE PLUGS for Sill Caps $1.00

Fixed Door/Sidelite Seat 74-1/4" $50.37

Open Out Bumper Sill Cap 73" $78.21

Seat for Fixed Door/Sidelite Open Out ZOB sill $16.13

Replacement Cap for Fixed Sill 74" $14.59

XN 3/4" Sill Extender Mill 12' $38.67XN -for 5-1/4" jambs XN 3/4" Sill Extender BRZ 12' 75.22

XW 2" Sill Extender Mill 12' $56.18XW for 6-9/16" jambs XW 2" Sill Extender BRZ 12' 80.06

ZWO SXW 2" Extender 74" $78.91Foam Outswing Extender (Inside cap). For use on FN sills only


of 306 9/28/20






Size Jamb

Sill Accessories

RDS Sills Replacement Decks

For : 4 5/8 MF 30 Mill finish $22.29 061-011

4 5/8 MF 60 Mill finish 47.45 4 5/8 BRZ 30 Brnz finish 39.25 4 5/8 BRZ 60 Brnz finish 78.57 6 5/8 MF 30 Mill finish 26.23 6 5/8 MF 60 Mill finish 55.97 6 5/8 BRZ 30 Brnz finish 44.52 6 5/8 BRZ 60 Brnz finish 88.58

Sill Cover7-13/16 x 3-0 Sill Cover $5.00

for ZAC sills w/extenders

Mull Boots

For Standard sillsMULL BOOT Open In -WHITE 49B2B $5.73MULL BOOT Open Out -WHITE 43FBOS 9.35

MULL BOOT Open In -BROWN 49B2B $5.73MULL BOOT Open Out -BROWN 43FBOS 9.35

PVC Door / Sidelight Stop

PVC STOP (fixed door/sidelight) 99" White $7.36 061-006

PVC STOP (fixed door/sidelight) 99" Textured Tan 15.55 018-081

Mull boots are use at the bottom of mull jambs to provide increased protection against rot.


of 306 9/28/20






Size Jamb

Z-Series ADA Compliant Inswing Sill

1/2" high 5-5/8" wideZHCI 5622T ADA 5-5/8" MILL 149-1/8" up to 3-0/6-0/3-0 $149.21ZHCI 5622T ADA 5-5/8 MILL 35 15/16" 3-0 31.23 ZHCI 5622T ADA 5-5/8 MILL 73" 6-0 82.07 shop

ZHCI 5622T ADA 5-5/8" Brz 149-1/8" up to 3-0/6-0/3-0 ** $264.71ZHCI 5622T ADA 5-5/8" Brz 35 15/16" 3-0 53.86 ZHCI 5622T ADA 5-5/8 Brz 73" 6-0 145.59 shop

Z-Series ADA Compliant Outswing Sill1/2" high 5-5/8" wide

ZHCO 5622T ADA 5-5/8 MILL 149" up to 3-0/6-0/3-0 ** $157.55ZHCO 5622T ADA 5-5/8 MILL 35 15/16" 3-0 47.27 shop

ZHCO 5622T ADA 5-5/8 MILL 73" 6-0 94.53 shop

ZHCO 5622T ADA 5-5/8 Brz 149" up to 3-0/6-0/3-0 ** $275.21ZHCO 5622T ADA 5-5/8 Brz 35 15/16" 3-0 82.56 shop

ZHCO 5622T ADA 5-5/8 Brz 72 3/8" 6-0 165.12 shop

** Add seats for fixed doors / sidelights (see below) on multiple units up to 12' wide.ADA Sill Accessories

ZHCI -ADA Fixed Seat - Open In 36" $33.15ZHCO -ADA Fixed Seat -Open Out 36" 34.80

ADA MULL BOOT Open In -BROWN 49ADA $6.35


of 306 9/28/20






Size Jamb

Attic Access Sill

DOORMAX ATTIC ACCESS -MILL 36" $24.13

For attic access units where the door opens into the finished space, the sill stays out of view.


of 306 9/28/20



Owner

Sticky Note




Size Jamb

French Door Astragals Astragal

Endura Ultimate Aluminum Astragals

White AluminumWhite,

& Wood Veneer onBronze Aluminum

White, & Wood Veneer onBronze Aluminum

For use with the Trilennium 3-Point Lock in a double door unit.

SLIDE BOLT MPA MULTIPOINT

TRILENNIUM COMPATABLE


of 306 9/28/20






Size Jamb

French Door Astragals

Endura Ultimate Aluminum Astragals

Ultimate SLIDE BOLT White Astragal

Standard used for 6-8 Steel, Smooth or Textured Fiberglass units6-8 LH 79" White SlideBolt $126.596-8 RH 79" White SlideBolt 126.59 8-0 LH 95" White SlideBolt $155.058-0 RH 95" White SlideBolt 155.05

Ultimate Slide Bolt Mahogany Veneer AstragalsRecommended Option for 6-8 and 8-0 Mahogany units

6-8 LH 79" Mahog SlideBolt $222.446-8 RH 79" Mahog SlideBolt 222.44 8-0 LH 95" Mahog SlideBolt $261.928-0 RH 95" Mahog SlideBolt 261.92

Ultimate Slide Bolt Fir Veneer AstragalsRecommended Option for 6-8 and 8-0 Fir units

6-8 LH 79" Fir SlideBolt $222.446-8 RH 79" Fir SlideBolt 222.44 8-0 LH 95" Fir SlideBolt $261.928-0 RH 95" Fir SlideBolt 261.92

Lasting performance and strength in a clean and simple

design.

SLIDE BOLT.


of 306 9/28/20






Size Jamb

French Door Astragals MULTIPOINT

Ultimate MULTIPOINT -FLIP LEVER-White Astragal for Steel Doors

6-8 LH 79" White FlipLever $419.116-8 RH 79" White FlipLever 419.11 8-0 LH 95" White FlipLever $447.598-0 RH 95" White FlipLever 447.59

Ultimate MULTIPOINT FLIP LEVER Mahogany Veneer Astragals

6-8 LH 79" Mahog FlipLever $523.046-8 RH 79" Mahog FlipLever 523.04 8-0 LH 95" Mahog FlipLever $562.568-0 RH 95" Mahog FlipLever 562.56

Ultimate MULTIPOINT FLIP LEVER Fir Veneer Astragals

6-8 LH 79" Fir FlipLever $523.046-8 RH 79" Fir FlipLever 523.04 8-0 LH 95" Fir FlipLever $562.568-0 RH 95" Fir FlipLever 562.56

Endura’s Ultimate Multi-Point Astragal combines all the features of the Ultimate Flip Lever™ Astragal with the added beneft of multi-point locking built right into the astragal.

Works with Standard Deadbolt Packages: No special hardware required.

Fights Deflection: Typical French door installations only hold the door panels together at one point the deadbolt. This permits door panel defection, and air and water infltration.

MPA's two additional locking points, prevent defection and resulting leaks.

Multi-Point Performance: With two additional locking points built into the astragal, MPA provides multi-point performance without requiring the added purchase of a multi-point

lock, delivering exceptional value and savings.


of 306 9/28/20






Size Jamb

French Door Astragals - Trilennium Compatible

Trilennium Compatible FLIP LEVER Astragals

Ultimate Trilennium Compatible FLIP LEVER White AstragalOption for 6-8 and 8-0 Steel, Smooth or Textured Fiberglass double units when the Trilennium Multipoint lock optiion is selected

6-8 LH 79" White FlipLever $258.726-8 RH 79" White FlipLever 258.72 8-0 LH 95" White FlipLever $292.498-0 RH 95" White FlipLever 292.49

Ultimate Trilennium Compatible FLIP LEVER Veneer Astragal Fir or Mahogany Veneer Option for 6-8 and 8-0 Steel, Smooth or Textured Fiberglass, or Mahogany Wood double units when the Trilennium Multipoint lock optiion is selected

6-8 LH 79" Fir or Mahog FlipLever $359.216-8 RH 79" Fir or Mahog FlipLever 359.21 8-0 LH 95" Fir or Mahog FlipLever $403.618-0 RH 95" Fir or Mahog FlipLever 403.61

Astragal only. Does not include the Trilennium Multipoint lock.

This Astragal is used when using the Trilennium Muitipoint Lock hardware on a double door unit.See the Trilennium information in Section 13.

Fights Deflection at All Times: Trilennium bolts pre-engage even when the door is unlocked fghting defection at all times. Once locked, bolts work with the astragal's unique strike plates to pull both doors into perfect alignment.

Unmatched Multi-Point Security: The Ultimate Trilennium Astragal works with the Trilennium Multi-Point Locking System’s solid I-beam construction and three full deadbolts to deliver a high security system that cannot be matched.

Built to complement the unmatched strength of the Trilennium Multi-Point Lock, the Ultimate Trilennium Astragal delivers ultimate French door security and protection.


of 306 9/28/20





DOOR UNIT COMPONENTS - SILLS & ASTRAGALS

Model Finish Length Application LIST PRICE CodeSize Unit

French Door Astragals

Wood Astragal for Wood Exterior Doors - Fir

Standard on all Fir exterior units - does not include head & foot bolts6-8 with w/Strip only - 79" mortised for bolts $116.31 061-007

6-8 with w/Strip only - 80" 109.948-0 with w/Strip only - 95" mortised for bolts 153.988-0 with w/Strip only - 96" 122.60

Flip lever bolts for above wood astragalsHead/Foot Bolt 7" Brass $14.57 061-005

Head/Foot Bolt 7" Col. Bronze 14.57Head/Foot Bolt 7" Satin Nickel 14.57Head/Foot Bolt 18" Col. Bronze 36.25Head/Foot Bolt 18" Satin Nickel 36.25Head/Foot Bolt 18" Antique Nickel 36.25

Wood Astragal Boot Left $9.00Wood Astragal Boot Right 9.00

18" bolt 7" bolt


of 306 9/28/20





DOOR WEATHER SEALING and FLASHING Application LIST PRICE

Vinyl Door Bottom / Sweep

For Wood Doors with Adjustable (screw type), and Fixed Sills Staple on 2-6 Brown Vinyl DBS-R Wood $5.79 2-8 Brown Vinyl DBS-R Wood 5.79 3-0 Brown Vinyl DBS-R Wood 6.46 4-0 Brown Vinyl DBS-R Wood 8.61

For Steel/FbrGlass Doors with Adjustable (screw type), and Fixed Sillsfor kerf bottom

2-8 Brown Vinyl Kerf DBK-R 32" STL/FG $5.00 3-0 Brown Vinyl Kerf DBK-R 36" STL/FG 5.37 4-0 Brown Vinyl Kerf DBK-R 48" STL/FG 7.81

For Wood Doors with ZAC Articulating Sill Staple on 2-8 Brown Vinyl DBS-AC Wood $10.84 3-0 Brown Vinyl DBS-AC Wood 11.60 4-0 Brown Vinyl DBS-AC Wood 14.27

For Steel/FbrGlass Doors with ZAC Articulating Sill for kerf bottom 2-0 Brown Vinyl Kerf DBK-AC 24" STL/FG $8.14 2-6 Brown Vinyl Kerf DBK-AC 30" STL/FG 8.88 2-8 Brown Vinyl Kerf DBK-AC 32" STL/FG 8.88 3-0 Brown Vinyl Kerf DBK-AC 36" STL/FG 9.48

Adjustable Replacement for Steel,FbrGls, or Wood Doors

3-0 Tan Vinyl Adjustable 36" $12.52 3-0 Brown Vinyl Adjustable 36" 12.52

Aluminum Door Sweep with notch and vinyl bottom adjustable

3-0 DB 003 -Z 36" Brite Brass $18.40 3-0 DB 003 -Z 36" Bronze 18.40 3-0 DB 003 -Z 36" Mill 12.00


of 306 9/28/20





DOOR WEATHER SEALING and FLASHING

WEATHERSTRIP

LIST PRICEQ-LON - QDS-650 Beige 81" 125/ctn $3.80Q-LON - QDS-650 Beige 97" 125/ctn 4.99Q-LON - QDS-650 Beige 37" 250/ctn 1.58

Q-LON - QDS-650 Bronze 81" 125/ctn $3.80Q-LON - QDS-650 Bronze 97" 125/ctn 4.99Q-LON - QDS-650 Bronze 37" 250/ctn 1.58

Q-LON - QDS-650 White 81" 125/ctn $4.44Q-LON - QDS-650 White 97" 125/ctn 5.85

Extra Reach WeatherstripQ-LON - QEBD-825 Beige 97" 100/ctn $8.62Q-LON - QEBD-825 Bronze 97" 100/ctn 8.77

Solution Corner Seal Beige 2" 2000/ctn $1.07Solution Corner Seal Bronze 2" 2000/ctn 1.07Solution Corner Seal White 2" 2000/ctn 1.07


of 306 9/28/20





DOOR WEATHER SEALING and FLASHING

SureSill Sill Pan Kitsships with

4-9/16" x 40" w/ 2 end caps $55.944-9/16" x 80" w/ 2 end caps 106.816-9/16" x 40" w/ 2 end caps 77.876-9/16" x 80" w/ 2 end caps 147.50

4-9/16" nsion Coupler $11.04

Key Features: * Durable synthetic construction * Sloped surface * Effective for both windows and doors * Integral drainage feature * Cuttable to desired length * Cost effective * Lock-in end caps with keyed profile design *Longer lengths with Extension Coupler.

Designed to prevent water infiltration and limit builder liability, the SureSill sill pan provides an effective and durable integrated drainage systemwith a recessed slope and horizontal surface

along the entire length of the door.

The SureSill is designed to be cut on the job to fit the rough opening. Specially designed end caps should be installed with PVC cement, allowing for an exact fit. The PVC cement creates

a chemical bond that is impentetrable by water, creating a water tight seal.


of 306 9/28/20


504-733-8500 800-229-3953Fax [email protected]

Section 10 page 18 Effective: February1, 2020


Cofair Products Waterproof Flashing

Tite Seal Self-Adhesive Waterproof Flashing per rollModel Width Length Roll or Flat Pieces/Case LIST PRICE Code

TS433 4" 33' Roll 18 $18.00TS633 6" 33' Roll 12 26.59TSU4100 4" 100' Roll 9 41.61TSU6100 6" 100' Roll 6 62.42

Tite Seal Flexible Self-Adhesive Waterproof Flashin per roll

TSF425 4" 25' Roll 18 $36.33


TSFM42F 5.5" 3.5' Flat 12 $14.37TSFM65 5.5" 6.5' Roll 12 21.30


of 306 9/28/20



Section 11 page 1 Effective: February 1, 2020

CLEAR FIR, PINE, & PRIMED FINGER-JOINTED

MOULDINGS


of 306 9/28/20


http://www.dykeind.com




MOULDINGS

CLEAR FIR PINE & PRIMED FINGER-JOINTED

#


of 306 9/28/20






MOULDINGS

PRIMED MDF

4 X 8 BOARDS - MDF & BIRCH


of 306 9/28/20






MOULDINGSPattern Number Description SIZE

CLEAR Lineal Mouldings Clear Mouldings are stocked in Random Lengths 6' - 16'

For Specified Lengths ( if available) ADD 15%(Hem-Fir - Unless otherwise specified)

per hundred lineal ft.WM 47 Fir Crown 11/16 x 4-5/8 $356.40 /clf 031-002

WM 100 Fir Cove 11/16 x 11/16 71.80 /clf 031-002

WM 106 Fir Qtr. Round 11/16 x 11/16 71.80 /clf 031-002

WM 108 Fir Qtr. Round 1/2 x 1/2 46.20 /clf 031-002

WM 129 Fir Base Shoe 7/16 x 11/16 55.80 /clf 031-002

WM 148 Fir Glass Bead 3/8 x 3/8 65.70 /clf 031-002

WM 180 Fir A P Casing 1-1/4 x 2 244.20 /clf 031-002

WM 205 Fir Outside Corner 1-1/8 x 1-1/8 x 8',12',16' 148.50 /clf 031-002

WM 206 Fir Outside Corner 11/16 x 11/16 77.20 /clf 031-002

WM 231 Pine Wall Rail 1-1/2 x 1-11/16 363.00 /clf 031-001

WM 233 Pine Full Round 1-5/16 257.40 /clf 031-002

WM 267 Fir Lattice 1/4 x 1-3/8 62.70 /clf 031-002

FLUTED INT Fir Casing 11/16 x 3-1/4 248.20 /clf 031-002

C-11 Fir Casing 7/8 x 3-1/4 231.00 /clf 031-002

WM 324 Fir Casing 11/16 x 2-1/4 138.60 /clf 031-002

WM 356 Fir Casing 11/16 x 2-1/4 138.60 /clf 031-002

B-11 Fir Base 5/8 x 5-1/4 438.90 /clf 031-012

WM 623 Fir Base 9/16 x 3-1/4 198.00 /clf 031-002

WM 713 Fir Base 9/16 x 3-1/4 198.00 /clf 031-002

S4S Stop Fir Door Stop 3/8 x 1-1/4 53.60 /clf 031-002

WM 1021 Fir Flat Stool 11/16 x 6-1/4 685.80 /clf 031-002


of 306 9/28/20






MOULDINGSPattern Number Description SIZE

CLEAR CUT TO LENGTH MOULDINGS Hem-Fir - Unless otherwise specified)

WM 180 -7' A P Casing 1-1/4 X 2 X 83" mitered $19.40 /pc

WM 324 -7' Casing 11/16 x 2-1/4 x 7' 10.34 /pc 031-023

WM 356 -7' Casing 11/16 x 2-1/4 x 7' 10.34 /pc 031-023

C-11 -7' Casing 7/8 x 3-1/4 x 7'4" 17.66 /pc 031-023

S4S STOP -7' Stop 3/8 x 1-1/4 x 7' 6.26 /pc 031-023

CLEAR PINE ASTRAGALS - for interior use

1300 W Pine 7' Astragal 1-3/4" doors $64.02 ea 031-001

1300 W Pine 8' Astragal 1-3/4" doors $68.40 ea

1305 W Pine 7' astragal 1-3/8" doors 48.90 ea 031-001

1305 W Pine 8' astragal 1-3/8" doors 56.60 ea 031-001

1305 W Pine 7' astragal 1-3/8" drs w/head bolt mortise* 54.80 ea 031-001

1305 W Pine 8' astragal 1-3/8" drs w/head bolt mortise* 62.90 ea 031-001

1300 W 1305 Wfor 1-3/4" doors for 1-3/8" doors

See Section 10 for Flush bolts.See Section 10 for Fir astragals for 1-3/4" doors, kerfed for weatherstrip.

* Mortised for 7" head or foot bolt.


of 306 9/28/20






Pattern Number Description SIZE

LINEAL PRIMED MOULDINGSStocked, and sold, in 16' lengths, except as noted per hundred lineal ft.

WM 47 Crown 11/16 x 4-5/8 $214.80 /clf 031-012

LWM 51 Crown 9/16 x 3-1/4 137.60 /clf 031-012

D 514 Crown 11/16 x 5-1/4 308.60 /clf 031-012

WM 106 Quarter Round 11/16 x 11/16 58.90 /clf 031-012

WM 129 Shoe 7/16 x 11/16 37.00 /clf 031-012

WM 163 Base Cap 11/16 x 1-3/8 77.20 /clf 031-012

WM 273 Picture Mould 11/16 x 1-3/4 85.20 /clf 031-012

WM 297 Chair Rail 21/32 x 2-21/32 132.60 /clf 031-012

WM 324 Casing* 11/16 x 2-1/4 91.30 /clf 031-012

WM 356 Casing* 11/16 x 2-1/4 14' 91.30 /clf 031-012

C-11 Casing* 7/8 x 3-1/4 17' 130.90 /clf 031-012

C-12 Casing* 1-1/4 x 4 17' 285.20 /clf 031-012

C-24 Casing* 1-1/8 x 3-1/4 17' 247.30 /clf 031-012

RB-3 Casing* 1 x 3-1/2 17' 253.40 /clf 031-012

3-1/4 Fluted Casing 3/4 x 3-1/4 149.50 /clf 031-012

WM 180 Brick Mld Casing 1-1/4 x 2 157.70 /clf 031-012

WM 351 Base 9/16 x 3-1/4 130.90 /clf 031-012

WM 623 Base 9/16 x 3-1/4 130.90 /clf 031-012

WM 713 Base 9/16 x 3-1/4 130.90 /clf 031-012

LWM 445 Base 9/16 x 3-1/4 130.90 /clf 031-012

B-10 Base 5/8 x 4-1/4 223.70 /clf 031-012

B-11 Base (New Orleans) 5/8 x 5-1/4 298.30 /clf 031-012

5180 Base 9/16 x 5-1/4 280.00 /clf 031-012

B-14 Base 11/16 x 7-1/4 383.20 /clf 031-012

Stop Door Stop* 11/32 x 1-7/32 63.60 /clf 031-012

WM 1021-5-1/4 Flat Stool 11/16 x 5-1/4 308.60 /clf 031-012

WM 1021 -6-1/4 Flat Stool 11/16 x 6-1/4 352.10 /clf 031-012

FLUTED EXT 1 Fluted/Beaded 1 x 4 327.20 /clf 031-012

FLUTED EXT 2 Fluted Casing 1 x 5-1/4 510.40 /clf 031-012

* Also stocked in precut door unit lengths. See next page.

MOULDINGS


of 306 9/28/20







MOULDINGS

PRIMED CUT TO LENGTH MOULDINGS

WM 356 -7 Casing 11/16 x 2-1/4 x 7' 7'0" $5.04 /pc 031-012

WM 324 -7 Casing 11/16 x 2-1/4 x 7' 7'0" 5.04 /pc 031-012

C-11 - 7 Casing 7/8 x 3-1/4 x 7'4" 8'6" 9.42 /pc 031-023

C-11 - 8 Casing 7/8 x 3-1/4 x 8'6" 8'6" 11.00 /pc 031-023

C-12 - 8 Casing 1-1/4" x 4" x 8-6" 8'6" 20.06 /pc 031-023

C-24 -8 Casing 1-1/8 x 3-1/4x8'6" 8'6" 21.38 /pc 031-023

RB-3 -8 Casing 1 x 3-1/2 x 8'6" 8'6" 23.92 /pc 031-012

S4S STOP -7 Stop 11/32 x 1-7/32 80-9/16" 3.68 /pc 031-012

S4S STOP - 8 Stop 11/32 x 1-7/32 96-9/16" 4.60 /pc 031-012

WM 180 -7 AP Csg 1-1/4 x 2 (mitered L/R) 6'11" 10.69 /pc 018-070

WM 180 -7 FrmSvr AP Csg 1-1/4 x 2 (mitered L/R) 6'11" 15.52 /pc 018-070

WM 180 -8 FrmSvr AP Csg 1-1/4 x 2 (mitered L/R) 8'3" 20.29 /pc

WM 180 -10 FrmSvr AP Csg 1-1/4 x 2 10'0" 23.99 /pc 018-070


of 306 9/28/20







MOULDINGS

MDF MOULDINGS Stocked and Sold in 16' lengths, except as noted. per hundred lineal ft.

MDF 51 Crown 9/16" X 3-1/4" X 16' $85.90 /clf 031-014

MDF 47 Crown 9/16" X 4-5/8" X 16' 116.50 /clf 031-014

MDF 44 Crown 5/8" X 5-1/4" X 16' 139.50 /clf 031-014

MDF 329 Crown /Cove 1-3/32" X 6-5/16" X 16' 389.90 /clf 031-014

MDF 7 Crown 11/16" X 7" X 16' 209.90 /clf 031-014

MDF 505 Cove 1" X 7" X 16' 331.20 /clf 031-014

MDF 513 Crown /Cove 1-1/8" x 8" X 16' 458.90 /clf 031-014

MDF 519 Cove / Crown 11/16" X 4-1/4" X 16' 209.90 /clf 031-014

MDF 562 Crown 1-1/4" X 7-1/4" X 16' 488.00 /clf 031-014

MDF 388 Backer 1/2" X 5-1/2" X 16' 124.10 /clf 031-014

MDF 391 Chair Rail 15/16" X 3-1/2" X 16' 193.70 /clf 031-014

MD623 Base 9/16" X 3-1/4" X 16' 86.50 /clf 031-014

MDF B-10 Base/Enhancer 5/8" X 4-3/8" X 16' 119.50 /clf 031-014

MDF5 Base 9/16" X 5-1/4" X 16' 133.10 /clf 031-014

MDF7 Base 9/16" X 7-1/4" X 16' 181.70 /clf 031-014

MDF9 Base 3/4" X 8-3/4 X 16' 302.20 /clf 031-014

MDF 312 Base 11/16" X 11-1/4" X 16' 333.10 /clf 031-014

MDF 1x12 S4S Board 11/16" X 11-1/4" X 16' 298.20 /clf 031-014

Primed MDF Nickle Gap T & G Ship Lap

MDF Nickle Gap Ship Lap 11/16" X 5-1/4" X 16' $144.00 /clf 031-014

Primed Moisture Resistant MDF Window StoolStandard Profile

MDF Stool- 5-1/4 11/16" X 5-1/4" X 16' $217.80 /clf 031-014

MDF Stool - 6-1/4 11/16" X 6-1/4" X 16' 248.80 /clf 031-014

MDF Stool - 8-1/4 11/16" X 9-1/4" X 16' 326.30 /clf 031-014

High Profile MDF HP Stool- 6-1/4 1-1/16" x 6-1/4" x 16' $358.20 /clf 031-014

MDF HP Stool- 8-1/4 1-1/16" x 8-1/4" x 16' 486.00 /clf 031-014

1-1/16" High Profile11/16" Standard ProfileF.O.B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice

of 306 9/28/20







MOULDINGS

4 X 8 BOARDS - MDF & BIRCHMDF 4X8 4' x 8' x 3/4" (unprimed) $83.90 /pc 035-011

BIRCH 4 X 8 4' x 8' x 3/4" 127.00 /pc 035-005

COMPOSITE BRICK MOULD - PlastPro PF - PRIMED

WM-180 Lineal 1-1/4" X 2" X 17' $316.48 /clf 018-080

WM-180 6'8" Mitered Leg 1-1/4" X 2" 6'11" 23.59 /pc 018-080


WM-180 3'0" Mitered Head 1-1/4" X 2" 10.86 /pc 018-080

COMPOSITE BRICK MOULD - PlastPro PF - Tan Textured

WM-180 Lineal 1-1/4" X 2" X 17' $338.56 /clf 018-081


WHITE PVC S4S(stocked in 18' lengths)

5/4 x 4 S4S PVC $594.20 /clf 032-001

1 x 4 S4S PVC 438.20 /clf 024-005

1 x 6 S4S PVC 797.00 /clf 024-005

TREATED SYP MOULDINGS

WM180 AP Casing 1-1/4" X 2" $414.00 /clf 031-011

WM 188 1-1/16" X 1-5/8" 414.00 /clf 031-011

MAHOGANY

C-11 -9' Mahogany (Sapele) 7/8" X 3-1/4" X 108" $117.37 /pc 031-027

1 x 4 S4S 8'4" 11/16" x 3-1/2" 54.34 /pc 018-055

WM180 AP Casing 9' 1-1/4" X 2" 50.90 /pc 018-055

Astragal 1-3/4 for 6'8" 94.19 /pc 018-055

Astragal 1-3/4 for 8'0" 144.90 /pc 018-055


of 306 9/28/20






MOULDINGS

Pattern Number Description SIZE LIST PRICE

SIDES OF CASING per side

One Side = 2 legs and 1 header.width x height, up to --

WM 324- 2-1/4" Clear Fir 3-0 x 6-8 $32.40 /eaWM 324- 2-1/4" Clear Fir 6-0 x 6-8 38.80 /ea

WM 356- 2-1/4" Clear Fir 3-0 x 6-8 32.40 /eaWM 356- 2-1/4" Clear Fir 6-0 x 6-8 38.80 /ea

C-11- 3-1/4" Clear Fir 3-0 x 6-8 55.20 /eaC-11- 3-1/4" Clear Fir 6-0 x 6-8 66.30 /ea

WM 324- 2-1/4" Primed 3-0 x 6-8 15.80 /eaWM 324- 2-1/4" Primed 6-0 x 6-8 19.00 /ea

WM 356- 2-1/4" Primed 3-0 x 6-8 15.80 /eaWM 356- 2-1/4" Primed 6-0 x 6-8 19.00 /ea

C-11- 3-1/4" Primed 3-0 x 6-8 29.50 /eaC-11- 3-1/4" Primed 6-0 x 6-8 35.40 /eaC-11- 3-1/4" Primed 3-0 x 8-0 34.40 /eaC-11- 3-1/4" Primed 6-0 x 8-0 41.30 /ea

C-24 - 3-1/4" Primed 3-0 x 6-8 66.90 /eaC-24 - 3-1/4" Primed 6-0 x 6-8 80.20 /eaC-24 - 3-1/4" Primed 3-0 x 8-0 66.90 /eaC-24 - 3-1/4" Primed 6-0 x 8-0 80.20 /ea

C-12 - 4-1/4" Primed 3-0 x 6-8 62.70 /eaC-12 - 4-1/4" Primed 6-0 x 6-8 75.30 /eaC-12 - 4-1/4" Primed 3-0 x 8-0 67.70 /eaC-12 - 4-1/4" Primed 6-0 x 8-0 81.30 /ea


of 306 9/28/20






MOULDINGS

Pattern Number Description SIZE LIST PRICE

SIDES OF FLUTED CASING

One Side = 2 legs and 1 header. 3-1/4 FLUTED Clear Fir 3-0 x 6-8 $55.90 /ea

6-0 x 6-8 68.30 /ea

3-1/4 FLUTED Primed 3-0 x 6-8 $34.20 /ea 6-0 x 6-8 41.80 /ea

4" FLUTED Primed 3-0 x 6-8 $73.60 /ea 6-0 x 6-8 90.00 /ea

5-1/4" FLUTED Primed 3-0 x 6-8 $114.80 /ea 6-0 x 6-8 140.30 /ea

BULLSEYE CORNER AND PLINTH BLOCKS

ROSETTE Pine 7/8 X 3-1/2 X 3-1/2 $12.58 /pc 031-001

ROSETTE Pine 1-1/8 x 4-1/4 x 4-1/4 12.80 /pc 031-001

ROSETTE Pine 1-1/8 x 5-1/2 x 5-1/2 16.10 /pc 031-001

PLINTH BLOCK Pine 1 1/8 x 3-1/2 x 6 13.88 /pc 031-001

PLINTH BLOCK Pine 7/8 x 3-1/2 x 8 15.36 /pc 031-001

PLINTH BLOCK Pine 1-1/8 x 4-1/4 x 7-1/2 17.58 /pc 031-001

PLINTH BLOCK Pine 1-1/8 x 5-1/2 x 8 21.24 /pc 031-001


of 306 9/28/20






MOULDINGS

Pattern Number SIZE LIST PRICE

Flexible Mouldings

Stock Items1/2 Circle Casing

DK-325 C-11 36" (18" radius) 1/2 round $88.60 /pc 031-016

DK-325 C-11 48" (24" radius) 1/2 round 110.20 /pc 031-016

Casing for Small Eyebrow

DYKENO C-11 32" X 6" RISE FLEX EYEBROW $112.00 /pc 031-016

DYKENO C-11 36" X 6" RISE FLEX EYEBROW 112.00 /pc 031-016

DYKENO C-11 48" X 6" RISE FLEX EYEBROW 132.00 /pc 031-016

Straight Mouldings

DYKENO B-11 FLEX 5/8 x 5-1/4 BASE $228.00 /pc 031-016

DYKENO B-10 FLEX 5/8 X 4-1/4 BASE 324.00 /pc 031-016

DYKENO B-14 FLEX 11/16 X 7-1/4 BASE 404.00 /pc 031-016

T-WM 1x6x12' S4S FLEX 3/4 X 5-1/2 FLAT STOCK 345.40 /pc 031-016

DYKENO WM129 FLEX SHOE 7/16 X 11/16 SHOE 57.00 /pc 031-016

DYKENO WM163 FLEX CAP 11/16 X 1-3/8 BASE CAP 82.20 /pc 031-016

DYKENO WM100 FLEX COVE 3/4" x 3/4" COVE 56.30 /pc 031-016

Flexible Mouldings - Special Shapes

Casing for Half Rounds, Arches, and Ellipticals, as well as Crowns for Curved Walls

Flexible moulding is easier to work with, generally faster and more economical, than rigid wood moulding, when applied to special shapes . Even though there is

flexibility in movement it should not be bent past a certain tolerance for best results,. It must be pre-formed during manufacture to better fit the shapes it is applied to.

PLEASE SEE NEXT PAGES FOR SPECIAL ORDERING INFORMATION.


of 306 9/28/20






MOULDINGS


Flexible Mouldings - Ordering Information

Ordering for a Half-Round

########

Ordering for an Arc or Eyebrow

Ordering for an Elliptical or an Oval

Please refer to the detailed installation and finishing instructions provided in each box of material.

For arched door entries/openings ,the key measurements we need are:1) Width of opening (inside jamb)2) Rise (Do not include leg height)

** TEMPLATES ARE NOT REQUIRED IF IT IS A TRUE RADIUS OPENING.

Material Length Required for Arc (in feet) = Rise x 3 + Width (both in inches) / 12

Continued on next page

Casing for elliptical and oval applications must be pre-bent at our factory.**Templates are required for ellipticals or ovals.

NOTE: There are limitations regarding how tight a radius can be created (a general "rule of thumb" is approximately 3x the width of the profile) so please contact our sales department if you have a tight radius application.

The sizes for half rounds are based on the DIAMETER (2x the radius) of the inside jamb width - per the below diagram. For example, a "2/0" half round will have a diameter of approximately 24". For a true half circle (half round) part, the radius (or rise) will be half of the diameter. The flexibility of our material allows us to offer 6 standard half round sizes that cover a range of widths from 1/8 (20") to 7/0 (84").

Material Length Required for Half Round (in feet) = Diameter/2 (Radius) + Casing width x Pi (3.146) / 12


of 306 9/28/20






MOULDINGS


Flexible Mouldings - Ordering InformationOrdering Crown

Calculating the radius

Please refer to the detailed installation and finishing instructions provided in each box of material.

1. Whether it is a Convex (Outside Radius or "OSR") or Concave (Inside Radius or "ISR") application – see below pictures. IMPORTANT: Please specify clearly if the crown is being used for a dormer application or a Tudor style (ski slope) roof.

-If it is a true radius application, the radius can be determined by providing the WIDTH and RISE (similar to an arc). Please provide the “A,” “B,” and “C” dimensions (as shown here) and we can calculate the radius.

*A template may be required if there are multiple radii.

2. How is the crown being installed? Identify the top (the part against the ceiling) and the bottom (the part against the wall) of the profile.

3. The radius of the wall and/or ceiling – please use the below diagrams if you are not sure how to calculate the radius.

Crown moulding is generally the most complicated product to order due to how it is mounted. Crown moulding normally needs to be pre-bent during production so please specify the following when placing an order:


of 306 9/28/20






MOULDINGS


Door and Window Pediment HeadFor Interior Use

Interior Pediment Head - order by Face Width For interior door units the face width should equal the outside casing measurement of the door unit below.

LIST PRICE LIST PRICE

face width with 1x6 face with 1x8 face

Pediment Head up to 32" $61 $66ea. up to 44" $75 $80

up to 56" $88 $95up to 80" $111 $121

per hundred lf

Pediment Cap Moulding - Poplar 1-1/8" x 2" x random $465.00 031-010

Pediment Bullnose Moulding -Poplar 1/2" x 1-1/8" x random $180.00 031-010

Shipped lose, not applied to door unit.


of 306 9/28/20






MOULDINGS


blank


of 306 9/28/20





Section 12 Page 1Effective:Sept. 14, 2020

STAIR PARTS

Our stair parts, from Fitts Industries, and

Creative Stair Parts by Southwest Moulding, are stocked in oak, with many of the balusters in primed.

Please use the Fitts Industries Stair Parts or the Creative Stair Parts catalogs for the selection of parts, and as a very useful

guide in determining what parts should be used in different applications.

Most stair systems are subject to local building codes that may require compliance with regards to rail height, rail size and profile, baluster spacing,

stair width, clearance and, tread rise and run. While Dyke Industries can offer help in compliance we cannot be responsible for the selection of parts

and/or their installation.

Most of our treads, railing, and fittings are stocked in Red Oak. Please check with our office for the availability of parts in White Oak, as well as Beech, Maple, Hemlock, Cherry, and Pine.


of 306 9/28/20





STAIR PARTS


of 306 9/28/20





STAIR PARTS

Starting Steps

Item Number Description List Price

8010 -48" Starting Step -Single OAK $376.228010 -60" Starting Step -Single OAK 447.88

8010-2 False End Starting Cap OAK 153.788015 42/48" Starting Step -Adjustable Double OAK 507.458015 54/60" Starting Step -Adjustable Double OAK 564.87

8010 Kit Cove and Shoe Set OAK 32.18

8015 & 8650 can be special ordered for a specified stair width.


of 306 9/28/20





STAIR PARTS

Treads, Risers, & Tread Caps

Item Number Description List Price Code

8070 36" Plain Tread - 11-1/2" OAK $39.538070 42" Plain Tread - 11-1/2" OAK 47.238070 48" Plain Tread - 11-1/2" OAK 55.208070 54" Plain Tread - 11-1/2" OAK 65.148070 60" Plain Tread - 11-1/2" OAK 72.238070 72" Plain Tread - 11-1/2" OAK 86.44

8070R 36" Mitered Return Tread -11-1/2" OAK $50.228070R 42" Mitered Return Tread -11-1/2" OAK 57.918070R 48" Mitered Return Tread -11-1/2" OAK 65.898070R 54" Mitered Return Tread -11-1/2" OAK 75.838070R 60" Mitered Return Tread -11-1/2" OAK 82.918070R 72" Mitered Return Tread -11-1/2" OAK 97.12

8071 L Tread Cap w/ Return OAK $28.448071 R Tread Cap w/ Return OAK 28.448072 Tread Cap OAK 15.928076 Riser Cap OAK 4.54

8075 36" Riser -7-1/2" OAK $21.148075 42" Riser -7-1/2" OAK 26.128075 48" Riser -7-1/2" OAK 30.518075 60" Riser -7-1/2" OAK 39.95


of 306 9/28/20





STAIR PARTS

Accessories


8080 Lineal Nosing -R/L OAK $468.008080 -13" Return Nosing -13" OAK 8.068090 3-1/2" Landing Tread -3-1/2" x RL OAK 629.648090 5-1/4" Landing Tread -5-1/4" x RL OAK 938.748095 Oak Cove OAK 125.937028 Tread Bracket -Plain OAK 13.937029 Tread Bracket -Scroll OAK 13.938422 Shoe Mould OAK 154.807017 Round Rosette OAK 12.897037 Oval Rosette OAK 12.89


of 306 9/28/20





STAIR PARTS

Accessories and Tools


3000 EA Plug OAK $1.173001 EA Rail Bolt 1.173011 EA Rail Bolt Wrench 43.063002 EA Wall Rail Bracket US3 7.41

EA Wall Rail Bracket US4 7.41EA Wall Rail Bracket US15A 7.41EA Wall Rail Bracket US 26D 7.41EA Wall Rail Bracket US 10 B 7.41

3004 EA Clamp Nail 0.783003 EA Baluster Fast'nr 3/8 x 2-1/2 1.253009 EA Baluster Fastener Driver 49.633005 EA Newel Fastener 25.623006 EA Rail & Post Fastener 13.653018 EA Zip Bolt (pk of 10) 85.806283 EA Newel Post Keylock #FU6283 35.10

061-014

061-014

061-014

061-014

061-014


of 306 9/28/20





STAIR PARTS

Handrail Selection and Accessories

Item Number Description List Price per

6010 2-1/4" Traditional Rail - 16' OAK $1,153.92 CLF

6010P 2-1/4" Traditional Rail w/plow OAK 1,548.96 CLF

6010BR 2-1/4" Traditional Bending Rail OAK 2,707.32 CLF

6010BM Bending Mould (for 6010BR, & 6210BR) 504.00 CLF

6210 2-5/8" Traditional Rail OAK 1,780.80 CLF

6210P 2-5/8" Traditional Rail w/plow OAK 2,069.29 CLF

6210BR 2-5/8" Traditional Bending Rail OAK 4,708.44 CLF

6410 2-5/8" Sheraton Rail OAK 2,343.53 CLF

6410P 2-5/8" Sheraton Rail w/ plow OAK 2,617.78 CLF

6410BR 2-5/8" Sheraton Bending Rail OAK 7,048.41 CLF

6415 Sheraton Bending Mould Hem 815.61 CLF

6040 Wall Rail OAK 759.36 CLF

7023 Quarter turn for 6040 wall rail OAK 70.12 CLF


of 306 9/28/20





STAIR PARTS

Newels Over the Post - Traditional


4010 3" Starting Newel OAK 43" $114.534011 3" Volute Newel OAK 43" 111.254012 3" Turnout Newel OAK 43" 114.914013 3" Volute Newel 34-38 Code OAK 47-1/2" 126.424014 3" Turnout Newel 34-38 Code OAK 49" 154.23

4020 3" Intermediate Newel OAK 48" 119.224030 3" Pin Top Rake Newel Newel OAK 43" 116.094035 3" Landing Newel OAK 60" 181.304015


of 306 9/28/20





STAIR PARTS

Newels Post to Post - Traditional


4040 3" Starting Newel OAK $128.594040.5 3" Split Newel OAK 83.14

4040-60 3" Starting Newel OAK 161.834042 3" Starting Newel OAK 163.074045 3" Landing Newel OAK 179.994046 3" Landing Newel OAK 161.234055 3" Landing Newel OAK 223.07


of 306 9/28/20





STAIR PARTS

Newels Post to Post -Hampton & Box Newels


4000 3-1/2" Starting Newel OAK $174.724001 3-1/2" Landing Newel OAK 188.434004 3-1/2" Starting Newel OAK 144.824005 3-1/2" Starting Newel OAK 233.454006 3-1/2" Landing Newel OAK 262.52

4090 4-1/2" Box Newel OAK $395.344091 5-1/2" Box Newel OAK 396.00

4091XL 6-1/4" Box Newel OAK 46.80Box newels come with interchangable pyramid and flat caps.


of 306 9/28/20





STAIR PARTS

Newels Sheraton


4454 3" Vol Newel 34"-38" rail height OAK $189.864410 3-1/2" Starting OAK 192.00

4340 3" Starting Newel OAK 134.054342 3" Landing Newel OAK 172.894442 3-1/2" Landing OAK 240.694445 3-1/2" Landing OAK 281.90


of 306 9/28/20





STAIR PARTS

Balusters - 1-1/4" Taper Top


Balusters - 1-1/4" Traditional5015- -34 1-1/4" Tapered OAK $19.565015- -36 1-1/4" Tapered OAK 20.665015- -39 1-1/4" Tapered OAK 22.685015- -42 1-1/4" Tapered OAK 23.62

5015-PR -34 1-1/4" Tapered Primed $10.185015-PR -36 1-1/4" Tapered Primed 10.995015-PR -39 1-1/4" Tapered Primed 11.935015-PR -41 1-1/4" Tapered Primed 12.675015-PR -43 1-1/4" Tapered Primed 13.44

Balusters - 1-1/4" Mini Sheraton5014 Poplar -33 1-1/4" Tapered - Plain Poplar $12.91 D5014 Poplar -36 1-1/4" Tapered - Plain Poplar 14.02 D5014 Poplar -42 1-1/4" Tapered - Plain Poplar 15.68 D


of 306 9/28/20





STAIR PARTS

Balusters - 1-1/4" Square Top & Square

Balusters - 1-1/4" Square Top - Traditional

5067-PR 36 1-1/4" Square Top Primed $11.145067-PR 39 1-1/4" Square Top Primed 12.255067-PR 42 1-1/4" Square Top Primed 13.12

5070- 36 1-1/4" Square Top Primed $11.775070- 39 1-1/4" Square Top Primed 11.995070- 42 1-1/4" Square Top Primed 13.46

Balusters - 1-1/4" Square - Mission Style 5060- 41 1-1/4" S4S Blank Primed $13.12


of 306 9/28/20





STAIR PARTS

Balusters - 1-3/4" Square Top & Square

Balusters - 1-3/4" Square Top - Traditional

5005-PR -32 1-3/4" Square Top Primed $17.40 D5005-PR -36 1-3/4" Square Top Primed 19.315005-PR -42 1-3/4" Square Top Primed 22.72

Balusters - 1-3/4" Square - Mission Style 5360- 36 1-3/4" S4S Blank Primed $19.525360- 42 1-3/4" S4S Blank Primed 22.76


of 306 9/28/20





STAIR PARTS

Balusters - 1-3/4" Sheraton

Balusters - 1-3/4" Square Top - Sheraton

5405 -36 1-3/4" Square Top - Plain Poplar $29.355405 -39 1-3/4" Square Top - Plain Poplar 31.185405 -42 1-3/4" Square Top - Plain Poplar 34.08


of 306 9/28/20





STAIR PARTS

Fittings 7000 & 7200 Traditional Series for 6010 & 6210 Rails

Fittings for the 6010 rail begin with 70_ _Fittings for the 6210 rail begin with 72_ _


of 306 9/28/20





STAIR PARTS

Fittings - Traditional 7000 Series - for 6010 Rail

7009 Returned End OAK $17.037010 Start Easing OAK 41.477011 Level Qtr Turn OAK 30.967012 Up Easing OAK 1.337013 Over Easing OAK 27.727014 90 Up Easing OAK 26.177015 Starting Easing Ret End OAK 40.727019 Opening Cap OAK 22.327020 Tandem Cap OAK 33.377021 Level Qtr Turn OAK 40.397030 LH Volute OAK 102.637035 RH Volute OAK 102.637040 LH Turnout OAK 68.047045 RH Turnout OAK 68.04

7047 (7007) S TURN Left Hand (4-1/2" offset) OAK 56.417048 (7006) S TURN Right Hand (4-1/2" offset) OAK 56.41

7050 LH Gooseneck OAK 103.547055 RH Gooseneck OAK 103.547071 LH Gooseneck OAK 82.047076 RH Gooseneck OAK 82.047089 Gooseneck w/cap OAK 86.547099 Gooseneck w/Level Rail OAK 63.54


of 306 9/28/20





STAIR PARTS

Fittings - Traditional 7200 Series - for 6210 Rail

7209 Returned End OAK $32.037210 Start Easing OAK 141.207211 Level Qtr Turn OAK 95.627212 Up Easing OAK 89.027213 Over Easing OAK 90.827215 Start Easing Ret End OAK 164.157220 Tandem Cap OAK 81.187221 Qtr Turn w/Cap OAK 119.037230 LH Volute OAK 318.737235 RH Volute OAK 318.737240 LH Turnout 4-7/8 C to C OAK 201.337241 LH Turnout 2-7/8 C to C OAK 201.337245 RH Turnout 4-7/8 C to C OAK 201.337246 RH Turnout 2-7/8 C to C OAK 201.337250 LH Gooseneck OAK 374.467255 RH Gooseneck OAK 374.467271 LH Gooseneck OAK 331.607276 RH Gooseneck OAK 331.607281 LH Gooseneck OAK 270.867286 RH Gooseneck OAK 270.877299 Gooseneck no Cap OAK 155.62


of 306 9/28/20





STAIR PARTS

Iron Stair Parts - Balusters & Accessories1/2" Iron Balusters

Stocked in SATIN BLACKOther finishes available by special order.


of 306 9/28/20





STAIR PARTS

Iron Stair Parts - Balusters & Accessories

1/2" Iron BalustersStocked in SATIN BLACK

Other finishes available by special order.

MC658 44" SB Iron Balluster 1 Twist $8.96MC533 44" SB Iron Balluster 2 Twist 9.11MC482 44" SB Iron Balluster 1 Basket 2 Twist 14.08MC481 44" SB Iron Balluster 2 Basket 1 Twist 18.07

M452 44" SB Iron Baluster Scroll 32.11M451 44" SB Iron Baluster Small Scroll 30.64

M505 44" SB Iron Baluster 1 Ribbon Twist 11.48M506 44" SB Iron Baluster 2 Ribbon Twist 13.75MC782 44" SB Iron Baluster 1 BSKT & 2 Ribbon Twist 17.82MC781 44" SB Iron Baluster 2 BSKT & 1 Ribbon Twist 21.02M742 44" SB Iron Baluster 1 B/FLY & 2 Ribbon Twist 20.67M741 44" SB Iron Baluster 2 B/FLY & 1 Ribbon Twist 23.21

06SB SB 1/2" Balluster Shoe 2.4602SB SB 1/2" Rake Balluster Shoe 2.96

3200 Injector Gun $194.883200EF Fast Cure Epoxy 46.333200NZ Injector Nozzle 4.52


of 306 9/28/20





STAIR PARTS

This page is blank for future use.


of 306 9/28/20




Section 12 Page 23 Effective: Oct 1, 2020

Disapearing Attic StairsRough Opening & Landing

Model Ceiling Height Min. Max. Space Code

WINDSOR - STANDARD DUTY(1) (2)

BE-100 25.5 x 54 x 10'2" 8'9" 10'2" 65" 75" 250 lbs $405 051-001 80

BE-100 F (Fire Guard) 25.5 x 54 x 10'2" 8'9" 10'2" 65" 75' 250 lbs 482 051-001 91

BET-89 22.5 x 54 x 8'9" truss size 7'0" 8'10" 58" 66" 250 lbs 372 051-001 81

BET-100 22.5 x 54 x 10'2" truss size 8'9" 10'2" 65" 75" 250 lbs 402 051-001 82

PREMIUM - HEAVY DUTY

AE-89 25.5. x 54 x 8'9" 7'0" 8'9" 59" 69" 350 lbs $505 051-001 83

AE-100 25.5 x 54 x 10'3" 8'9" 10'1" 67" 78" 350 lbs 548 051-001 84

AE-100 F (Fire Guard) 25.5 x 54 x 10'3" 8'9" 10'1" 67" 78" 350 lbs 625 051-001 86

PREMIUM - SPACEMAKER Same features as the Premium, with a wider opening for easier use.

AG-100-F (Fire Guard) 30 X 54 X 10'3" 8'9" 10'1" 67" 79" 350 lbs $568 051-001 130

ELITE ALUMINUM - HEAVY DUTY

AA-2510 25.5 x 54 x 7-8" - 10'3" 7'8" 10'3" 64" 74" 375 lbs $525 051-001 72

FTAA-2510 (Fire Guard) 25.5 x 54 x 7-8" - 10'3" 7'8" 10'3" 64" 74" 375 lbs 584 051-001 75

EVEREST ALUMINUM - 12' HEAVY DUTY

FTAL-258P 25.5 x 64 x 10' - 12' 10'0" 12'0" 90" 92" 350 lbs $1,087 051-001 35

. ACCESSORIESPull Down Pole Kit AAPD 42" - 72" $36 051-001

Weather Stripping AAWB oly bagged special order 051-001

F = FireGuard Panel.These are fire retardant, not fire rated.

Meets most building codes.

Ceiling Height

Note: Attic stairs are shipped

fully assembled, in a carton.

LISTLoad

Capacity

Same features as the ELITE ALUMINUM. Comes with Adjustable Pull-Down Pole & Insulated Door

Projec tion

5-1/4" Step Depth, 5-1/4" Rail Size,3/16" Steel Rod Reinforced Tread

3-5/16" Step Depth, 3/4" x 3-3/8" Rail Size,3/16" Steel Rod Reinforced Tread

3-1/4" Step Depth, 3-1/8" Rail Size, Slip-Resistant StepsAdjustable Shoes, Advanced Cylinder Design


of 306 9/28/20




Section 12 Page 23 Effective: Oct 1, 2020

This page is blank for future use.


of 306 9/28/20




Section 12 Page 25Effective: Aug 27, 2019

COLUMNS AND PORCH POST

PermaCast Round Fiberglass Columns

- Weatherproof LIST PRICE- Low MaintenanceColumns are among the most versatile vertical supports available.These architecturally proportioned columns feel like natural stoneand have the enduring characteristics of stone.

Meets ASTM E84-01 Fire code rating Priced with Code

Cap & BasePlain Round Stock Sizes

6" x 8' Plain $326 047-040

8" x 8' Plain 3188" x 10' Plain 376

10" x 8' Plain 39710" x 10' Plain 475

12" x 8' Plain $62612" x 10' Plain 74212" x 12' Plain 960

Extra Cap and Base sets

(Included in Column prices)

6" $71 047-040

8" 7110" 10212" 136

Roman Doric cap & base or Attic base

can be special ordered at an additional charge.

Sizes up to 30" in diameter, and lengths to 30' are available in PERMA Cast columns, in a variety

of types, including Tapered Round, Round with No-Taper, and Fluted.


of 306 9/28/20






PermaLite Square Synthetic Columns

PermaLite Square Columns with Cap & Base LIST PRICE

Stock Sizes 8" x 8' $4638" x 10' $549

PermaLite Extra Cap & Base Sets - Square(Included with Complete column set above)

8" $85

Inside dimension: Structural load limits:6" 5-1/4" 5,000 lbs.Max8" 7-1/4" 6,500 lbs.Max10" 9-1/4" 7,000 lbs.Max12" 11-1/4" 7,500 lbs.Max

PermaLite synthetic columns by HB&G are not only

Lightweight and Load Bearing, but are also cost effective, versatile, and require very little

maintenance.The PermaLite column is available in

Round, Square, and Square with Recessed Panel.

Perma-Lite Square Columns: Cost Effective, Load Bearing, Light Weight, and require little maintenance.


of 306 9/28/20






PermaCast Square Fiberglass Columns

- Weatherproof- Low Maintenance- LIFETIME WARRANTYConstructed of fiberglass-reinforced polymers (FPR), Poly-ClassicColumns are among the most versatile vertical supports available.These architecturally proportioned columns feel like natural stone

and have the enduring characteristics of stone.Meets ASTM E84-01 Fire code rating

PermaCast Square Columns with Cap & BaseThe columns below are priced with the cap and base.

LIST PRICEStock Sizes 8" x 8' $632

8" x 10' 72410" x 10' 953

PermaCast Extra Cap & Base Sets - Square(Included with Complete column set above)

8" $9110" 132

Inside dimension: Structural load limits:8" 6-7/8" 10,000 lbs.Max10" 9" 14,000 lbs.Max12" 11" 18,000 lbs.Max14" 14-1/4" 20,000 lbs.Max


of 306 9/28/20






PermaCast Square Rough SawnTM

Fiberglass Columns• First Fiberglass Column with thelook and feel of wood

• Will not check, twist, or rot• Load Bearing (Up to 7,300 lbs.)• Weather Proof• Insect Proof• Low Maintenance• Easy Installation• Limited Lifetime Warranty

10" x 12' STOCK $1,024

Other available* sizes8" x 8'8" x 9'8" x 10'10" x 8'10" x 9'12' x 8'12" x 9'12" x 10'12" x 12'

Rough SawnTM Accessories4" Trim* $426" Trim* $50

24" Brace $212

Shown with trim

* Trim is 4 pieces of material. Enough for a cap or base.Ready to stainor paint. Oversized so they can be cut to pinwheel the column ormitered.

Polyurethane brace with the same look and feel of the PermaCast® RoughSawn™ structural fiberglass column. Ready to stain or paint.


of 306 9/28/20






ROUND WOOD COLONIAL TAPERED PINE andARCHITECTURAL WOOD COLUMNS

HB&G's architectural wood shop can produce a complete line of wood column styles and sizes on a stock and custom size basis. We offer columns ranging from the timeless architectural orders, all-tapered, plain or fluted styles. Columns are available in paint grade, finger-jointed wood species (pine, redwood, or cedar) for interior or exterior applications or stain grade woods for interior applications. Our stock wood columns are available in a finger-jointed pine. We can factory prime columns to be painted and

apply an asphaltum coating to the interior of the column for added protection for columns to be installed outside.

Options include round and square fluted, recessed panel Heritage, and textured Elite or Legend.

Please provide your specifications for a quote.

Basic Round Wood Columns are available by Special Order in sizes 6" to 12" diameter, and 8', 10', & 12' lengths.


of 306 9/28/20






TURNED PORCH POST

PERMA POST by HB&G

5" x 5" x 8' $2156" x 6" x 8' 337

COLONIAL STYLE WOOD STYLE PORCH POST 40-5/8" Turned Area - 32" Unturned base4" x 4" x 8' $1515" x 5" x 8' 2136" x 6" x 8' 2706" x 6" x 9' 369- Kiln Dried Finger-jointed pine

- Primed (these are not pressure treated)

Net Sizes for Unturned Areas: Load Bearing

4 x 4 =3 -1/4" 3,000

5 x 5 =4 -1/4" 6,000

6 x 6 =5 -1/4" 7,500

CAST ALUMINUM PLINTHS3-1/4" for 4 x 4 Post 13.47$ 4-1/4" for 5 x 5 Post 15.595" for 6 x 6 Post 17.48

Note: PermaPost are available, and carry a 25 year warranty. See Permapost above.

Wood post must be installed with aluminum plinths, and painted with high quality exterior paint, to comply with manufacturer's 1 year warranty.

- Weatherproof, Will Not Rot- Low Maintenance - Insect Proof- Can be Painted. Requires only One Coat of Latex.- Can be Trimmed as Necessary- Shipped White Ready to Install- Installs Easily with Common Carpentry Tools

The Perma Post is shipped with a 20 ga. galvanized structural steel tube inside. Load bearing capacity 1300 lbs.


of 306 9/28/20




Section 13 page 1 Effective: Aug.27, 2019

TRILENNIUM Swinging Door Multi-Point Hardware

Trilennium Multi-Point Hardware System - More than just security -

- Better door closure and sealing than a single point lock

- I-Beam construction incorporates greater strength,stiffness, and security into the complete lock system.

- Ease of operation - 90 degree thumb turn rotationengages three hardened steel deadbolts intoreinforced steel strike plates. The draw-in design of the bolts pull the doortightly into the weather-strip and securelyholds the door to the frame.One simple downward movement on the inside lever releases all three bolts.

- Variety of handle sets and finishes are available.

Eclipse Lever set

Entrance Grip Handleset with interior Eclipse Lever


of 306 9/28/20





TRILENNIUM Swinging Door Multi-Point Hardware

Trilennium Multi-Point Lock - Hardware only

Series 3000 6'8" LH Stainless Steel 521.91$ 059-016

Series 3000 6'8" RH Stainless Steel 521.91 059-016

Series 3000 8'0" LH Stainless Steel 604.25 059-016

Series 3000 8'0" RH Stainless Steel 604.25 059-016

Series 3000 6'8" LH Victorian Bronze 508.66$ 059-016

Series 3000 6'8" RH Victorian Bronze 508.66 059-016

Series 3000 8'0" LH Victorian Bronze 591.67 059-016

Series 3000 8'0" RH Victorian Bronze 591.67 059-016

TRILENNIUM Multi-Point Hardware Finish Options

Strike Plates - for Trilennium Compatible AstragalTC-STRIKE PCK-ULT Victorian Bronze 50.91$ 059-016

TC-STRIKE PCK-ULT Stainless Steel 64.51 059-016

TC-STRIKE PCK- ULT Satin Nickel 116.85 059-016

TC-STRIKE PCK-ULT Black 57.06 059-016

Strike Plates - for Wood Astragals or Single door unit JambTC-STRIKE PCK-ULT Victorian Bronze 31.49$ 059-016

TC-STRIKE PCK-ULT Stainless Steel 43.66 059-016

TC-STRIKE PCK- ULT Satin Nickel 84.78 059-016

TC-STRIKE PCK-ULT Black 34.79 059-016

** Compatible Astragal option must be added for double units.

Edge faceplate finish

For Installation in Single Door Unit or Double Door Unit ** see the ADDITIONS pages in Wood exterior, or Steel and Fiberglass pages in sections 4B and 4C.


of 306 9/28/20





TRILENNIUM Multi-Point Hardware Finish Options

Trilennium Eclipse Lever - inside and outside

LIST PRICE RODUCT CODE

Eclipse Lever -10P Victorian Bronze $235 059-016

Eclipse Lever -15 Satin Nickel 388 059-016

Trilennium Eclipse Grip Handleset - with Lever insideEclipse Grip Handleset 10P Victorian Bronze -Right Hand $605 059-016

Eclipse Grip Handleset 10P Victorian Bronze -Left Hand 605 059-016

Eclipse Grip Handleset 15PVD Satin Nickel -Right Hand 873 059-016

Eclipse Grip Handleset 15PVD Satin Nickel -Left Hand 873 059-016

Trilennium Curved Lever - inside and outsideCurved Lever -10P Victorian Bronze $249 059-016

Curved Lever -15 Satin Nickel 396 059-016

Trilennium Rectangular Lever - inside and outsideRectangular Lever - 10 Victorian Bronze $265 059-016

Rectangular Lever - Black 265 059-016

Rectangular Lever - Satin Nickel 476 059-016

Accessories#1100 Trilennium Construction Handle $41 059-016

#2000 9" Trilennium Magnum Bolt (for wood astragal) 24 059-016

#2000 19" Trilennium Magnum Bolt (for wood astragal) 37 059-016

#613 Trilennium Astragal Boot (for wood astragal) 13 059-016

boltsConstruction handle


of 306 9/28/20





Blank


of 306 9/28/20




Section 13 page 5 Effective:February 1, 2020

Locks & Miscellaneous Door Hardware

Style Model Finish pcs/ctn LIST PRICE Code

L03 Lifetime Polished Brass3 Polished Brass5 Antique Brass

11P Venetian Bronze15 Satin Nickel *

15-A Antique Nickel *

26-D Satin Chrome *

514 Iron Black* The latches for locks in these finishes will have a 26D finish only.

5 Year Finish Warranty (Lifetime on L03)

Signature Series keyed locks are available with SmartKey Technology (SMT) which allows for do-it-yourself keying without removing the lock

from the door.

Lifetime Mechanical Warranty

Solid Forged-Brass Handlesets

Traditional and Timeless Designs

Signature Series

Kwikset Series

ANSI/BHMA Grade 1 980/985 Deadbolt

Unique Rustic Finishes

1 Year Electronic Warranty

Easy Installation

SmartKey with BumpGuard Technology

Lifetime Mechanical Warranty10 Year Finish Warranty (Lifetine on L03)

ANSI/BHMA Grade 3*SmartKey with BumpGuard Technology

F.O..B. New Orleans or Delivered our Truck. Prices Subject To Change Without Notice

of 306 9/28/20







Signature Series Handlesets

LIP - see note below SMT - Smart KeyAshfield 800 ADH 11P Venetian Bronze LIP SMT $277.40 068-049

800 ADH 514 Iron Black LIP SMT 288.70 068-049

Avalon 800 AVH 11P Venetian Bronze LIP SMT $277.40 068-049800 AVH 514 Iron Black LIP SMT 288.70 068-049

Chelsea 800 CE 11P Venetian Bronze LIP SMT $216.20 068-041800 CE 15 Satin Nickel LIP SMT 216.20 068-041800 CE 15-A Antique Nickel LIP SMT 216.20 068-041

Shelburne 800 SE 15 Satin Nickel LIP SMT $261.10 068-041

* Note : Above pricing is for exterior of handleset and does not include interior trim (LIP=Less Interior Pack). The interior trim pack (knob or lever) and deadbolt function

(single or double cylinder) must be added. See Interior Pack pricing on next page.

Ashfield Avalon Chelsea Shelburne


of 306 9/28/20

Owner

Typewritten Text

Owner

Typewritten Text







Interior Packs for 800 series Signature HandlesetsSee stock selections of interior packs in the pricing section of each interior lock style.

ADD to Handleset PriceSignature Series Lever and Laurel Knob

Single Cylinder 966 $71.40Double Cylinder 967 * ns

Signature Series Knob (other than Laurel)Single Cylinder 966 $59.20

Double Cylinder 967 * ns

Kwikset Series LeverSingle Cylinder 966 $64.30


Kwikset KnobSingle Cylinder 966 $52.00


* 967 Double Cylinder interior pack is not stocked for all designs.


of 306 9/28/20







Signature Series - Levers

HalifaxIron Black

154 HFL 514 Passage/Closet 12 $60.20 068-047155 HFL 514 Privacy 12 63.20 068-047156 HFL 514 Keyed 12 107.10 068-047157 HFL 514 Dummy 20 30.60 068-047966 HFL 514 i/s trim sgl. 12 71.40 068-047

Functions:720 -Passage/Closet730 -Privacy740 -Keyed966 -handleset i/s trim sgl.967 -handleset i/s trim dbl.


of 306 9/28/20








Ashfield Lever -(ADL)Venetian Bronze

720 ADL 11P Passage/Closet 12 $68.30 068-047730 ADL 11P Privacy 12 71.40 068-047740 ADL 11P Keyed 12 114.20 068-047788 ADL 11P Dummy 20 33.70 068-047966 ADL 11P i/s trim sgl. 12 71.40 068-047



of 306 9/28/20

Owner

Typewritten Text








Commonwealth Venetian Bronze

720 CHL 11P Passage/Closet 12 $60.20 068-007730 CHL 11P Privacy 12 63.20740 CHL 11P Keyed 12 107.10788 CHL 11P Dummy RH 20 30.60788 CHL 11P Dummy LH 20 30.60966 CHL 11P i/s trim sgl. RH 12 71.40966 CHL 11P i/s trim sgl. LH 12 71.40

Satin Nickel720 CHL 15 Passage/Closet 12 $60.20 068-007730 CHL 15 Privacy 12 63.20740 CHL 15 Keyed 12 107.10788 CHL 15 Dummy RH 20 30.60788 CHL 15 Dummy LH 20 30.60966 CHL 15 i/s trim sgl. RH 12 65.00966 CHL 15 i/s trim sgl. LH 12 65.00



of 306 9/28/20








Tustin Lever (TNL)

720 TNL 11P Passage/Closet 20 $51.00 068-047730 TNL 11P Privacy 20 54.10 068-047740 TNL 11P Keyed 20 76.50 068-047788 TNL 11P Dummy RH 20 25.50 068-047788 TNL 11P Dummy LH 20 25.50 068-047966 TNL 11P i/s trim sgl. RH 12 71.40 068-047966 TNL 11P i/s trim sgl. LH 12 71.40 068-047

720 TNL 15 Passage/Closet 20 $51.00 068-047730 TNL 15 Privacy 20 54.10 068-047740 TNL 15 Keyed 20 76.50 068-047788 TNL 15 Dummy RH 20 25.50 068-047788 TNL 15 Dummy LH 20 25.50 068-047966 TNL 15 i/s trim sgl. RH 12 71.40 068-047966 TNL 15 i/s trim sgl. LH 12 71.40 068-047



of 306 9/28/20

Owner

Cross-Out







Signature Series - Knobs

Hancock Knob (H)

720 H 514 Passage/Closet 12 $38.80 068-048730 H 514 Privacy 12 42.80 068-048740 H 514 Keyed 12 65.30 068-048788 H 514 Dummy 20 19.40 068-048966 H 514 i/s trim sgl. 12 59.20 068-048

720 H 3 Passage/Closet 12 $30.60 068-013730 H 3 Privacy 12 33.70 068-013740 H L03 Keyed 12 62.20 068-013740 H 3 Keyed 12 57.10 068-013788 H 3 Dummy 20 15.30 068-013966 H 3 i/s trim sgl. gl I/s tr 12 59.20 068-013

Functions:720 -Passage/Closet More Hancock on next page.730 -Privacy740 -Keyed966 -handleset i/s trim sgl.967 -handleset i/s trim dbl.


of 306 9/28/20








Hancock Knob (H)

720 H 11P Venetian Bronze Passage/Closet 12 $35.70 068-013730 H 11P Privacy 12 38.80 068-013740 H 11P Keyed 12 62.20 068-013788 H 11P Dummy 20 18.40 068-013966 H 11P i/s trim sgl. 12 59.20 068-013

720 H 15 Satin Chrome Passage/Closet 12 $35.70 068-013730 H 15 Privacy 12 38.80 068-013740 H 15 Keyed 12 62.20 068-013788 H 15 Dummy 20 18.40 068-013966 H 15 i/s trim sgl. 12 59.20 068-013

720 H 15-A Antique Nickel Passage/Closet 12 $35.70 068-013730 H 15-A Privacy 12 38.80 068-013740 H 15-A Keyed 12 62.20 068-013788 H 15-A Dummy 20 18.40 068-013966 H 15A i/s trim sgl. 12 59.20 068-013

720 H 26D Satin Chrome Passage/Closet 12 $35.70 068-013730 H 26D Privacy 12 38.80 068-013740 H 26D Keyed 12 62.20 068-013788 H 26D Dummy 20 18.40 068-013966 H 26D i/s trim sgl. 12 59.20 068-013



of 306 9/28/20

Owner

Typewritten Text








Laurel Knob (L)

720 L 514 Iron Black Passage/Closet 12 $57.10 068-048730 L 514 Privacy 12 60.20 068-048740 L 514 Keyed 12 83.60 068-048788 L 514 Dummy 20 28.60 068-048966 L 514 i/s trim sgl. 12 71.40 068-048

720 L 11P Venetian Bronze Passage/Closet 12 $54.10 068-024730 L 11P Privacy 12 57.10 068-024740 L 11P Keyed 12 80.60 068-024788 L 11P Dummy 20 27.50 068-024966 L 11P i/s trim sgl. 6 71.40 068-024

720 L 15 Satin Nickel Passage/Closet 12 $54.10 068-024730 L 15 Privacy 12 57.10 068-024740 L 15 Keyed 12 80.60 068-024788 L 15 Dummy 20 27.50 068-024966 L 15 i/s trim sgl. 9 71.40 068-024



of 306 9/28/20







Kwikset Signature Series - DeadBolts

980 11P Venetian Bronze 12 $74.50 068-015980 514 Iron Black 12 77.50 068-015

985 ** 11P Venetian Bronze 12 101.00 068-015Grade 1

780 L03 Lifetime Polished Brass 12 $63.20 068-015780 3 Polished Brass 12 55.10 068-015

Grade 2 780 11P Venetian Bronze 12 63.20 068-015780 15 Satin Nickel 12 63.20 068-015780 15-A Antique Nickel 12 63.20 068-015780 26D Satin Chrome 12 63.20 068-015

785 ** L03 Lifetime Polished Brass 12 $89.80 068-015785 ** 3 Polished Brass 12 81.80 068-015

Grade 2 785 ** 11P Venetian Bronze 12 81.60 068-015785 ** 15 Satin Nickel 12 89.80 068-015

Kwikset Series - Deadbolts

660 3 Polished Brass 12 35.60 068-015660 15 Satin Nickel 12 38.70 068-015660 11P Venetian Bronze 12 38.70 068-015

665 ** 3 Polished Brass 12 43.80 068-015Double Cylinder

Double Cylinder

Single Cylinder

Double Cylinder

Single Cylinder

** Double Cylinder deadbolts will be discontinued from our stock. They will be available by speial order. Pricing listed is subject to stock on hand.

Single Cylinder


of 306 9/28/20







Kwikset Series - Levers

Dorian Lever (DNL)

200 DNL 15 Satin Nickel Passage/Closet 20 $41.80 068-050300 DNL 15 Privacy 20 44.90 068-050405 DNL 15 Keyed 20 65.20 068-050488 DNL 15 Dummy 20 22.40 068-050966 DNL 15 i/s trim sgl. 12 64.30 068-050

Functions:300 -privacy400 -keyed 488 -Dummy 966 -handleset i/s trim sgl967 -handleset i/s trim dbl.


of 306 9/28/20







Kwikset Series - Knobs

Cove Knob (CV)

200 CV 11P Venetian Bronze Passage/Closet 12 $28.60 068-048300 CV 11P Privacy 12 31.60 068-048400 CV 11P Keyed 12 42.70 068-048488 CV 11P Dummy 20 16.30 068-048966 CV 11P i/s trim sgl. 12 52.00 068-048

200 CV 15 Satin Nickel Passage/Closet 12 $28.60 068-048300 CV 15 Privacy 12 31.60 068-048400 CV 15 Keyed 12 42.70 068-048488 CV 15 Dummy 20 16.30 068-048966 CV 15 i/s trim sgl. 12 52.00 068-048

Functions:200 -passage /Closet300 -privacy400 -keyed 488 -Dummy 966 -handleset i/s trim sgl967 -handleset i/s trim dbl.


of 306 9/28/20








Polo Knob (P)

200 P 11P Venetian Bronze Passage/Closet 30 $25.50 068-007300 P 11P Privacy 30 28.60 068-007400 P 11P Keyed 30 39.70 068-007488 P 11P Dummy 20 14.30 068-007966 P 11P i/s trim sgl. 52.00 068-007

200 P 15 Satin Nickel Passage/Closet 30 $25.50 068-007300 P 15 Privacy 30 28.60 068-007400 P 15 Keyed 30 39.70 068-007488 P 15 Dummy 20 14.30 068-007966 P 15 i/s trim sgl. 52.00 068-007



of 306 9/28/20








Tylo Knob (T)

*200 T 3 Polished Brass Passage/Closet 30 $21.40 068-009*300 T 3 Privacy 30 23.50 068-009400 T 3 Keyed 30 34.60 068-009488 T 3 Dummy 20 10.20 068-009966 T 3 i/s trim sgl. 6 52.00 068-009

*w/steel latch

*200 T 26D Satin Chrome Passage/Closet 30 20.40 068-009*300 T 26D Privacy 30 23.50 068-009400 T 26D Keyed 30 34.60 068-009488 T 26D Dummy 20 10.20 068-009966 T 26D i/s trim sgl. 52.00 068-009

*w/steel latch



of 306 9/28/20







Pocket Door Latches

Notch Pocket Door LocksPassage

332 3 Polished Brass Pass. $34.00 068-028332 5 Antique Brass Pass. 34.00 068-028332 26 Polished Chrome Pass. 34.00 061-015

Requires a 2-1/4" x 332 15A Antique Nickel Pass. 34.00 061-015cut-out in edge of 1 SDL 17 15 Satin Nickel Pass. 34.00 068-028

SDL 17 10B Venetian Bronze Pass. 34.00 061-015Privacy

333 3 Polished Brass Priv. $36.00 068-028333 5 Antique Brass Priv. 36.00 068-028333 26 Polished Chrome Priv. 36.00 061-015333 15A Antique Nickel Priv. 36.00 061-015

SDL16 15 Satin Nickel Priv. 36.00 068-028SDL16 10B Venetian Bronze Priv. 36.00 061-015

Round Pocket Door LocksPassage

334 3 Polished Brass Passage $38.00 068-028334 15 Satin Nickel " 38.00 068-028334 15A Antique Nickel " 38.00 068-028334 10B Venetian Bronze " 38.00 068-028

Privacy335 3 Polished Brass Privacy $42.00 068-028

Round design fits a 335 15 Satin Nickel " 42.00 068-0282-1/8" lock bore. 335 15A Antique Nickel " 42.00 068-028

335 10B Venetian Bronze " 42.00 068-028

Finishes3 Polished Brass5 Antique Brass

26 polished chrome15A Antique Nickel15 Satin Nickel

Bronze10B/11P


of 306 9/28/20




Section 18 Page 1Effective:October 2019

HARDWARE

MISCELLANEOUS DOOR HARDWARE LIST PRICE Product M/M

Door Saver - Hinge Mounted Door Stop This design braces against the hinge, so it will not damage the door.

Door Saver I $4.00 061-014

Bright Brass, Pewter**, Antique Nickel, Antique Brass, Bronze** used as satin nickel, and chrome

Door Saver II Heavy Duty $14.95 061-014Brushed Stainless, Bronze

Flexible Door Stop (Spring Type) $2.25 061-014

Brass, Satin Chrome/Nickel, Ant Brass, Dark Bronze

Rigid Door Stop US 26D $2.25 061-015

Ball Catches Drive-in Brass - with Brass Strike plate $6.00 061-005

Ball Catch Strike Plates (Optional Finish Strike Plates) $2.20 061-005

Brass, Satin Chrome/Nickel, Ant Brass, Dark Bronze, Black

Deadbolt Strike Plate 1" x 2 1/4" $2.20 061-014

Satin Nickel, Ant Nickel, or Bronze

E-Z Latch Magnetic latch for double interior doors.

EZ Latch ctn pk 1 per ctn each $18.00 061-014

* EZ Latch shop pack 100 per ctn each 12.80 061-014* For shop use, or sold in 100 pc ctn only.

The magnets latch both doors at the top and align the doors at the bottom.


of 306 9/28/20






HARDWARE

HINGES

3-1/2" x 5/8 radius 4" x 5/8 Radius 4" x 5/8 Radius/Square 4" Springeach

3-1/2" x 3-1/2" STANDARD 5/8" Radius Corner, Steel Hinges $4.50 061-009

3-1/2" x 3-1/2" BALL BEARING 5/8" radius corner, steel hinges $8.003-1/2" x 3-1/2" 5/8" Radius Corner, STAINLESS STEEL Hinges $9.00

4" x 4" STANDARD 5/8" / 5/8" Radius Corner , Steel Hinges $6.50 061-009

4" x 4" STANDARD 5/8"Radius / SQR Corner , Steel Hinges 6.504" x 4" NRP 5/8" / 5/8" Radius Corner , Steel Hinges 7.004" x 4" NRP 5/8"Radius / SQR Corner , Steel Hinges 7.004" x 4" BALL BEARING 5/8" / 5/8" Radius Corner , Steel Hinges 11.004" x 4" SPRING 5/8" / 5/8" Radius Corner , Steel Hinges 18.004" x 4" 5/8" / 5/8" Radius Corner , STAINLESS STEEL Hinges 12.004" x 4" NRP 5/8" Radius Corner , STAINLESS STEEL Hinges 12.00

For full cartons of 100 hinges - Deduct 25%Stock Hinge Selections


of 306 9/28/20






HARDWARE

Double Acting Floor Hinge non-adjustable - for doors to 35 lbs.Double Acting Spring Hinge Hinge US3 BRIGHT BRASS $119.84 061-009

Hinge CB/US10B BRONZE 144.48 Hinge SN/US15 SATIN NICKEL 131.36Jamb Mounting Bracket Bracket US3 BRIGHT B $42.12 061-009

Bracket US10B/CB 34.32 Bracket US15/SN M 30.32

Head & Foot Bolts

Flush Bolts - 6" - Mortised - slide action $18.00 061-005

Bright Brass, Bronze, Satin Chrome, or Antique Nickel 061-014

Surface Bolts - 6" $20.00 061-014 Bright Brass, Satin Chrome, Satin Nickel, or Antique Nickel

Endura Mortised Flush Bolts - with Flip Lever actionShop standard for exterior wood double door units

7" Bolt - with Flip Lever action $14.06 061-005

Brass, Col. Bronze, or Satin Nickel

18" Bolt - with Flip Lever action 34.94 061-005 Col. Bronze, Satin Nickel, or Antique Nickel

18" has concealed rod.

Door Viewer

US 3 Bright Brass 160 0 - 1/2" bore $10.00 061-014

US 15 Satin Nickel 160 0 - 1/2" bore 10.00


of 306 9/28/20






HARDWARE

Pocket Door Latches

Square Notched - Requires 2-1/4" x 1-7/8" cut-out

Passage

332 3 Polished Brass $34.00 068-028

332 5 Antique Brass 34.00 068-028

332 26 Polished Chrome 34.00 061-015

332 15A Antique Nickel 34.00 061-015

SDL 17 15 Satin Nickel 34.00 068-028

SDL 17 10B Venetian Bronze 34.00 061-015Privacy

333 3 Polished Brass $36.00 068-028

333 5 Antique Brass 36.00 068-028

333 26 Polished Chrome 36.00 061-015

333 15A Antique Nickel 36.00 061-015

SDL16 15 Satin Nickel 36.00 068-028

SDL16 10B Venetian Bronze 36.00 061-015

Round Round design installs in standard 2-1/8" lock bore.Passage

334 3 Polished Brass $38.00 068-028

334 15 Satin Nickel 38.00 068-028

334 15A Antique Nickel 38.00 068-028

334 10B Venetian Bronze 38.00 068-028

Privacy335 3 Polished Brass $42.00 068-028

335 15 Satin Nickel 42.00 068-028

335 15A Antique Nickel 42.00 068-028

335 10B Venetian Bronze 42.00 068-028

Edge PullPocket door Edge Pull. 150 -3PK1 $7.69 061-015 For use with converging doors.

See Section 13 for other door lock selections


of 306 9/28/20






HARDWARE

Hand Rail Bracket

US3 Bright Brass $7.75 061-014

US4 Dull Brass 7.00 061-014

US 15A Antique Nickel 7.00 061-014

US 26D Satin Chrome 7.00 061-014

US 10 B Rubbed Bronze 7.00 061-014

Closet Rods and Shelf Supports

Adjustable Closet Rod # 1795

18" to 30" $8.7630" to 48" 15.5248" to 72" 18.3672" to 96" 22.9696" to 150" 33.32

Rod and Shelf Support White $6.75

"L" Support Bracket White $6.48

Metal Pole Socket White $2.93


of 306 9/28/20






HARDWARE

Barn Door Hardware WALL MOUNTED BARN DOOR KITS

100K• Hardware available for 1-3/8" and 1-3/4" thick doors weighing up to 250 lbs.

• Stocked in two factory finishes: Matt Black and Stainless Steel (Bronze by special order)• Factory finished, ready-to-install• Ideal for openings 28" - 34" wide for 78 3/4" track and openings 34" - 44" wide for 96" track• Unique barn door style hardware enables door to slide parallel to wall• Use for closet, room divider or passage door applications• Available accessories: Handle, Pull, Privacy latch (internal-side) and track connector for bi-parting door application

LIST PRICE ITEM CODE

78-3/4" BD KIT STRAIGHT STRAP STAINLESS STEEL $294 061-012

96" BD KIT STRAIGHT STRAP STAINLESS STEEL 322 061-012

78-3/4" BD KIT STRAIGHT STRAP MATTE BLACK 224 061-012

96" BD KIT STRAIGHT STRAP MATTE BLACK 259 061-012

78-3/4" BD KIT BENT STRAP STAINLESS STEEL $301 061-012

96" BD KIT BENT STRAP STAINLESS STEEL 322 061-012

78-3/4" BD KIT BENT STRAP MATTE BLACK 253 061-012

96" BD KIT BENT STRAP MATTE BLACK 259 061-012

78-3/4" BD KIT TOP MOUNT STAINLESS STEEL $294 061-012

96" BD KIT TOP MOUNT STAINLESS STEEL 315 061-012

78-3/4" BD KIT TOP MOUNT MATTE BLACK 217 061-012

96" BD KIT TOP MOUNT MATTE BLACK 245 061-012

STRAIGHT STRAP BENT STRAP TOP OF DOOR

BENT STRAP KITS

STRAIGHT STRAP KITS

102K 101K

BD100K-07800-SSBD100K-09600-SSBD100K-07800-MBBD100K-09600-MB

• Kits in 78 3/4" and 96" track widths, includes door straps, all mounting hardwareand floor guide options

BD102K-07800-SS

BD101K-09600-SSBD101K-07800-MBBD101K-09600-MB

BD102K-09600-SSBD102K-07800-MBBD102K-09600-MB

TOP OF DOOR KITS

BD101K-07800-SS


of 306 9/28/20





HARDWARE


Barn Door Hardware Stock Accessories

TRACK JOINER KIT STAINLESS STEEL $14 061-012TRACK JOINER KIT MATT BLACK 8 061-012BARN DOOR LATCH STAINLESS STEEL 25 061-012BARN DOOR LATCH MATT BLACK 18 061-012BARN DOOR HANDLE STAINLESS STEEL $41 061-012BARN DOOR HANDLE MATTE BLACK 28 061-012FLUSH PULL STAINLESS STEEL 44 061-012FLUSH PULL MATTE BLACK 31 061-012

BD460-SSBD460-MB

BD125-SSBD125-MBBD250-SSBD250-MBBD450-SSBD450-MB

ACCESSORIES


of 306 9/28/20





HARDWARE


BARN DOOR HARDWARE- INSTALLATION NOTES

DOOR SIZING

• 78-3/4" Kits will accommodate door widths up to approximately 36"- you loseapproximately 2" on each end of track because of the track stops right-angle design. (1)

• 96" Kits will accommodate doors up to approximately 46"- same situation as describedabove. (1)

• Door width should ideally be approximately 4" larger than finished opening. Door heightshould be approximately 2" larger than finished opening. This allows door to cover doorcasing (trim) and provides a better finished appearance and reduces light leakagearound door.

INSTALLATION

• Drywall installations require a full length 1x6 wood header applied to the wall surface,unless wall was framed with full length header prior to drywall. This header replaces topdoor trim piece {if using standard 80"height door). It also adds about%" additional wallstandoff. If particularly thick door casing is used, you may want to consider using 2x6header. The supplied Wall-Track Spacers (BD350) provide 1" track standoff from the wallalone.

BI-PARTING DOORS- SINGLE TRACK

• A 96" track kit will only accommodate two 24" doors in a bi-parting application with a44" finished opening. Any opening larger than approximately 44" will require 2complete kits. (1)

• Tracks must be centered on the opening.• Additional hardware components needed in addition to the door kit if using 2 doors:2 ea. Door Straps (hangers}1 pr. 80850 Track Stops1 pr. Anti-Jump Blocks1 ea. Door Guide {either 99161 wall mount guide set, or BD750 floor mount guide)4 ea. BD133 1-3/4" strap bolts (if 1-3/4" doors are used)


of 306 9/28/20





HARDWARE


BI-PARTING DOORS -TWO KITS

• For larger openings you can use 2 -78-3/4"or 96" kits joined in the center of theopening using the BD125 Track Joiner. All other parts are included in the kits tocomplete the installation.(1) Door Stops may need to be extended completely to the end of track in order toaccommodate maximum door width.

LONGER TRACK RUNS

• When you need additional door travel distance than what a single track can provide orwhen using doors larger than 46", you can add a second 96" track. Additional partsrequired:1 ea. BDS000-09600-xx Track6 ea. BD350-xx Wall Spacer6 ea. BD136-xx Bolt for Track Spacer1-3 ea. Additional Door Guides (either 99161 or BD750)

ADDITIONAL HARDWARE ACCESSORIES

BD250-xx Privacy LatchBD450-xx Bar Pull 6-7 /16"BD460-xx Rectangular Flush Pull 6-1/2"


of 306 9/28/20





HARDWARE


NON-STOCK- HARDWARE ACCESSORIES Special Order

ADD-A-DOOR KIT

BD400-100-SS STRAIGHT STRAP KIT STAINLESS STEEL $467 plus shippingBD400-100-MB STRAIGHT STRAP KIT MATT BLACK $298

BD400-100-SS TOP OF DOOR STRAP KIT STAINLESS STEEL $441BD400-100-MB TOP OF DOOR STRAP KIT MATT BLACK $284

BD400-100-SS BENT STRAP KIT STAINLESS STEEL $492BD400-100-MB BENT STRAP KIT MATT BLACK $313

SINGLE STRAP Supplied with mounting bolts for 1-3/8" DoorsBD550-SS STRAIGHT STRAP STAINLESS STEEL $179BD550-MB STRAIGHT STRAP MATT BLACK 109BD551-SS TOP OF DOOR STAINLESS STEEL 166BD551-MB TOP OF DOOR MATT BLACK 95BD552-SS BENT STRAP STAINLESS STEEL 192BD552-MB BENT STRAP MATT BLACK 120

EASY CLIPTM SOFT CLOSE HARDWARE

* Low profile attachment is concealed behind the track and does not affect the look of your hardware* Kit includes 2 Easy Clip Soft Close attachments for both ends of your track

to open and close quietly and effortlessly

* Installs in minutes to most flat track barn door kits* Mounts directly to your previously installed hardware* On 18" Biparting doors, the Easy Clip Mechanism can only be used to either soft open or soft close

Size selection is determined by door weight.BDF960-1020-MB 22 - 44 Lbs. $124BDF960-2040-MB 44 - 88 Lbs. 124BDF960-4060-MB 88 - 132 Lbs. 142BDF960-6085-MB 132 - 187 Lbs. 142

This hardware is designed to be mounted to the back of an existing Barn Door flat track. The left and right sided hardware are each mounted at the ends of the track to provide soft close and soft open operation of the door.

Provides Soft Close and soft-open operation

of the door

The items below are not stocked, but can be ordered to come in with stock shipments at no additionas freight.If needed faster we can quote for the order to

ship on it's own.

Set includes: pair of straps with 1-3/8" mounting bolts, left and right stoppers, set of Anit-Jump discs, and standard guide with alternate optional floor guides.


of 306 9/28/20




httpa:// NewOrleans.DykeDoors.com

Section 19 Page 1Effective: October 2018

SKYLIGHTS

DURA SERIES SFA Model

Super-Tough Lexan Double Dome.Bronze over Clear.Bronze Aluminum Self Flashed Frame.

MODEL ROOF OPENING LIST PRICE

SFA 2222 22-1/2 x 22-1/2 Special Order




CLASSIC SERIES FGC Model

Tempered Safety Glass.Bronze Tint Insulated Safety Glass.Bronze Aluminum Self Flashed Frame.

Special OrderMODEL ROOF OPENING

FGC 2525 22-1/2 x 22-1/2 Special Order

FGC 2549 22-1/2 x 46-1/2 Special Order


of 306 9/28/20




httpa:// NewOrleans.DykeDoors.com

Section 19 Page 2Effective: October 2018

SKYLIGHTS

This Page Blank


of 306 9/28/20



neworleans.dykedoors.com dyke industries, inc. · woodfold accordion doors 7. doors - leaded glass....

Documents