C O M P A N Y I N T R O D U C T I O N

01

w w w . h o a p h a t . c o m . v n

As a member of Hoa Phat Group (HPG), Hoa Phat Steel Sheet Company was established in early 2016 and specializes in manufacturing steel sheet products including PO/CR/GI/GL/ PPGI/PPGL. That’s a new project which we called as a cold rolled Complex. This is an important step for HPG to close its chain valued added of steel products – the core sector of HPG.

The Complex is located in Pho Noi A industrial zone, Hung Yen Province, has been invested with total capital of 170 millions USD and overall capacity of 400.000 Mts per year. The factory will officially come into production with first commercial products in 1st Quarter 2018. All the machines were imported from Europe and Australia with the most advanced technology.

We supply a wide range of Picked & Oiled steel coils; Cold rolled (full hard) steel coils; Hot-dip Galvanized/ Al-Zn coated steel coils; Prepainted Hot-dip galvanized/Al-Zn coated steel coils, complying with JIS 3321: 2010; BS EN 10346: 2009; AS 1397:2001; ASTM A792…Especially, the GI/GL& Color coating line can produce most high quality products that will meet all local customer’s requirement and plan to export to worldwide market such as Europe, USA, Asia, etc…

With over 20 years of experience in steel factory investment, HPG is achieving a biggest market share of construction steel and steel pipe in Vietnam and exporting to big markets including North America, Europe, Australia and South East Asia.

We commit to reaching high levels of productivity and quality, continued compliance to all environmental regulations, to protect present and future human health in our local environment.

HOA PHAT STEEL SHEET COMPANY LIMITED

02w w w . h o a p h a t . c o m . v n

Investment capital:

Area:

Main equipments and capacity:

E1, E zone, Pho Noi A, Lac Dao Town, Van Lam District, Hung Yen Province, Vietnam

170 millions USD, capacity 400.000 Mts / year.

Equipment Manufacturer: From European & G7 countries:

1 push-pull picking line: 600.000 Mts/year

2 cold rolling mills: 200.000 Mts/year/line

1 Continuous hot-dip galvanizing/Al-Zn coating line: 350.000 Mts/year.

Danieli - Italy

SMS - Austria

Bronx - Australia

1 Pre-painted hot-dip galvanizing/Al-Zn coating line: 120.000 Mts/year.

1 Acid regeneration plant

Address:

CAPACITY

120.327m 2

1 Hot-dip Al-Zn coating line: 150.000 Mts/year.

w w w . h o a p h a t . c o m . v n 03

PICKED & OILED STEEL COILS (PO). COLD ROLLED STEEL COILS (CRC-FULL HARD)

HOT- DIP GALVANIZED/AL-ZN COATED STEEL COILS (GI/GL)

PRE-PAINTED HOT-DIP GALVANIZED/AL-ZN COATEDED STEEL COILS (PPGI/PPGL)

04

PRODUCT RANGE

05

P R O D U C T I O N L I N E

06

PRODUCTION LINE

HOT ROLLED STEEL COILS

1

PUSH – PULL PICKLING LINE

2

PICKLED STEEL COILS

4

COLD ROLLING MILL

5

COLD ROLLED STEEL COILS

6

HOT-DIP AL-ZN COATING LINE

7

CONTINUOUS HOT-DIP GALVANIZING LINE

8

HOT-DIP AL-ZN COATED STEEL COILS

9

HOT-DIP GALVA-NIZED STEEL COILS

10

PRE-PAINTED HOT-DIP GALVANIZING/AL-ZN COATING LINE

11

PREPAINTED HOT-DIP GALVANIZED/AL-ZN COATED STEEL COIL

12

QUALITY INSPECTION

13

ACID REGENERATION PLANT

3

1.PUSH - PULL PICKLING LINE (01 line)

Capacity: 400.000-600.000 Mts/year

1. Pay off reel

2. Flattener 3. Entry double cut shears

4. Entry scrap diverter table

5. Pickling tank

6. Rinsing bath

7. Air dryer 8. Looper 9. Side trimmer

10. Tension roller 11. EPC 12. Tension reel 13. Electrostatic oiler

PRODUCT OF PUSH - PULL PICKLING LINE

Picked & Oiled Steel coils (PO).• Standard: SAE 1006, JIS G3131 SPHC• Width (mm): • Thickness(mm): 1,2 ÷ 4,0• Coil ID (mm): 610 (± 10)• Coil OD (mm) : max 2.000• Coil weight (MT): max 25

650 ÷ 1.250

PRODUCTION LINE

07

w w w . h o a p h a t . c o m . v n

PRODUCTION LINE

2.COLD ROLLING MILL (02 mills)

Capacity: 200.000 Mts/year/line

08

9. Entry free bridle roll 10. 4_Hi mill Stand

11. Hydraulic Force Cylinder

12. Delivery thickness gauge

5. Flattener roll 6. Entry tension reel 7. Entry shape metter

8. Entry thickness gauge

1. Coil car 2. Coil saddles 3. Pay off reel

4. Pinch roll

13. Delivery shape meter roll 14. Delivery shear 15. Delivery tension reel

COLD ROLLED STEEL COILS(CRC-FULL HARD)

• Standard: JIS G 3141 (SPCC-1B)• Tensile strength (N/mm2 ): min 550• Width(mm): 650 - 1.250• Thickness (mm): 0,15 – 2,5• Coil ID (mm): 508 (± 10), 610(± 10)• Coil OD (mm): 900 ≤ Ø ≤ 2.000• Coil weight (MT): max 25• Hardness (HRB): min 85

09

w w w . h o a p h a t . c o m . v n

PRODUCTION LINE

Total Capacity: 500.000 Mts/year

1. Pay off reel 2. Welding machine 3. Entry accumulator 4. Cleaning section 5. Non oxidising furnace

6. Zinc coating post 7. Air knife rigs 8. Cooling tower 9. Coating gauge 10. Skin pass mill

11. Flattener 12. Chemical coater 13. Dryer 14. Exit accumulator 15. Electrostatic oiler

16. Tension reel

3.HOT-DIP CONTINUOUS GALVANIZING/AL-ZN ALLOY COATING LINE (02 lines)

10

With 55% aluminum, 43,5% zinc and about 1.5% silicon,the galvalume products consist of following outstanding characteristics:

• Excellent corrosion resistance.• Easy maintenance.• Durability• Easy installation.• Attractive silver color.• High heat reflectivity.• Safety and suitability for climatic conditions of Vietnam.• Sunlight reflection.• No cracking, no peeling, no rusty surface

T-BEND: ≤ 2T

TENSILE STRENGTH (N/mm2): Min 270BASE METAL THICKNESS (mm):

WIDTH (mm): 750 -1.250COIL ID (mm): 508 (± 10), 610 (± 10)COIL OD (mm): 900 ≤ Ø ≤ 2.000COIL WEIGHT (MTS): max 25COATING MASS: • GI: Z06 - Z35 • GL: AZ40 - AZ200

• GI: JIS G3302/BSEN 10346/AS 1397/ASTM A653- A653M • GL: JIS G3321/ BSEN 10346/AS 1397/ASTM A792- A792M

TECHNOLOGY: NOFSTANDARD:

• GI: 0,25 – 3,0 • GL: 0,15 – 1,5

HOT- DIP GALVANIZED/AL-ZN COATED STEEL COILS (GI/GL)

11

WARRANTY

HOA

PHAT STEEL SHEET

www.hoaphat.com.vn

1. Raw material 2. Joiner 3. Entry accumulator

4. Cleaning 5. Pre - Treatment 6. Air dryer

7. Primer coater 8. Primer oven 9. Finish coater

10. Finish oven 11. Exit accumulator 12. Exit shear

13. Tension reel

4.PRE-PAINTED HOT-DIP GALVANIZING/AL-ZN COATING LINE (01 line)

Capacity: 120.000 tons/year

PRODUCTION LINE

PRE-PAINTED HOT-DIP GALVANIZED/AL-ZN COATED STEEL COILS (PPGI/PPGL)• Standard: JIS G3322/ JIS G3312/ ASTM A755/ A755M/ BS EN 10169/ AS 2728 • Coil ID (mm): 508 (±10), 610 (±10)• Coil OD (mm): Max 1500• Coil weight: Max 10 MT• Tensile strength(N/mm2): min 270 N/mm• Cold rolling strip (Base metal) thickness (mm): 0,15 - 0,8• Width (mm): 600 - 1250 (mm)• Top coat: 15 - 25 (± 1μm) • Back coat: 5 - 25 (± 1μm) • T-Bend: ≤ 3T• Pencil hardness: ≥ 2H.• MEK Solvent Strength: ≥ 100DR• Adhesion: no peeling• Impact Resistance: no peeling• Glossiness: 25 - 85%

COMMITMENT OF HOA PHAT STEEL SHEET• High quality and durability product• Accurate size and thickness according to registered standards.• Warranty up to 20 years.• Always caring, sharing and accompanying with customers.

12

Structural Engineering & Construction

Truss/Roofing/Door case/wall/Building material

Electrical panel/Tooling box/wind pipe/Cable Trunking

Container partition/Path indicators/Soundproof wall/Fences/ Traffic signal

Decoration/Furniture & Others

APPLICATIONS OF PRODUCTS

13

Road No.7, Hoa Khanh Industrial park,Lien Chieu District, Da Nang City, Vietnam.T: (+84-236) 3733999 - F: (+84-236) 3721245

641-643 Dien Bien Phu street,25 Ward, Binh Thanh District, Ho Chi Minh City, Vietnam.

39 Nguyen Dinh Chieu Street,Le Dai Hanh Ward, Hai Ba Trung District, Hanoi, Vietnam, T: (+84-24) 36332108E: steelsheet.ex@hoaphat.com.vn

F: (+84-24) 36332107 –

Head office in Hanoi:

Da Nang Branch:

Ho Chi Minh Branch:

T: (+84-28) 62567979 – F: (+84-28) 62947979

w w w . h o a p h a t . c o m . v n