e80-120xn series

E80-120XNE80-120XNE80- SERI

ES

COUNTERBALANCED ELECTRIC, CUSHION TIRE

E80-120XN Series

As the market leader in the 8,000 to 12,000 lb. cushion tire electric truck category, we could

have rested on our laurels. But that’s not the Hyster way. Instead, we talked with customers and

operators in automotive, paper and manufacturing industries, along with our designers and

engineers, and went to work making our trucks more comfortable, more durable and more

ef� cient than ever. Hyster® E80-120XN series trucks do the heavy lifting with ease—up to 12,000

pounds—so your operators can be more productive and you can maximize your ROI.

2

3

Our electric E80-120XN series trucks meet the same high-performance standards as our counterbalanced

ICE trucks in regards to acceleration, speed control and load-lift abilities. They also offer a lower operating cost,

along with zero emissions. Power-assisted braking means improved brake life and reduces operator braking

efforts by 40 percent. Plus, with Hyster Company’s automatic park brake—which no other manufacturer

offers—your operators can save signi� cant time.

Built for Peak Performance

Hyster Company has a history of more than 80 years spent engineering and manufacturing some of the most

reliable and productive lift trucks on the market. The new Hyster® E80-120XN series continues that legacy with

a lift truck that was designed and built to be the most dependable in the marketplace.

Thermal Management System

• The Hyster-designed thermal management system continuously monitors the E80-120XN series’ controller and motor temperature. Upon identifying an irregularity, it protects the component by automatically adjusting truck performance.

• Large air inlet ports in the rear of the truck are protected and strategically positioned to provide fresh air intake for controller cooling.

• Heat sinks are used to draw heat away from the motor controllers, and cooling fans are positioned on top of the heat sink.

World-Class Dependability

• The Hyster-designed cast ductile iron steer axle provides maximum ` dependability. Its transverse, double-acting hydraulic cylinder, tapered roller spindle-support bearings and non-adjustable tie rods provide maximum durability with superior steering control and load handling.

• The unitized design and welded steel construction of the frame provide better rigidity and excellent protection for the internal components. The exceptional strength and durability of the frame are designed and tested using computer-generated Finite Element Analysis. A stamped steel hood provides a durable, long-lasting exterior that will not crack.

• The full � oating design of the drive axle lets the axle housing, not the shafts, carry the weight of the load, enhancing dependability and reliability for a longer service life.

• Wet disc brakes provide excellent stopping power with low brake pedal effort, while also requiring no adjustments and minimal servicing (periodic lubrication changes at 4,000-hr intervals).

DEPENDABILITY

There’s no quit in a Hyster® Lift Truck.

Frame

Heat Sink

4

Industrial-Strength Electronics

• CANbus communications network reduces wiring complexity, providing superior dependability.

• Double-sealed electrical connectors provide a waterproof connection to prevent contamination.

• A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while increasing durability and simplifying maintenance when needed.

• Non-mechanical, Hall-Effect sensors and switches are designed to outlast the life of the truck.

• Proven to be durable, the Pacesetter VSM (Vehicle System Manager) industrial onboard computer manages truck operations to maintain world-class dependability to maximize uptime.

Hassle-Free Hydraulics

• Leak-free O-ring face seal � ttings reduce leaks for enhanced reliability.

• A 10-micron, high-performance, in-tank � ltration system captures 99.5 percent of hydraulic system debris, signi� cantly extending component life.

• Smart placement of the control valve and hydraulic lines away from heat sources reduces operating temperature, extending the life of seals and hoses and improving longevity.

A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while

Double-sealed electrical connectors provide a waterproof connection to prevent contamination.

A smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while





CANbus communications network reduces wiring complexity, providing superior dependability.












CANbus communications network reduces wiring complexity, providing superior dependability.CANbus communications network reduces wiring complexity, providing superior dependability.CANbus communications network reduces wiring complexity, providing superior dependability.CANbus communications network reduces wiring complexity, providing superior dependability.CANbus communications network reduces wiring complexity, providing superior dependability.CANbus communications network reduces wiring complexity, providing superior dependability.

5

Hydraulic System

LOW COST OF OWNERSHIP

Little to own. Lots to appreciate.The Hyster® E80-120XN series can lower your cost of operations by delivering increased productivity,

lowered energy consumption, advanced dependability and reduced maintenance costs. The standard

AC traction and hydraulic motors are unsurpassed in the materials handling industry so they spend

more time working and less time being worked on.

Brushless AC Technology

• The E80-120XN is a full AC product, utilizing AC traction and hydraulic motors eliminating the motor brushes and the commutator, as well as related parts and service costs.

• A single hydraulic pump and motor is utilized for both the mast and steering functions decreasing the number of components and reducing the chances of failure.

Vehicle System Manager

• The Pacesetter VSM monitors and communicates the truck’s multiple systems via the CANbus communication system, keeping a constant check on the unit and vital components.

• All vehicle systems are managed electronically to optimize performance and significantly increase overall reliability and enhance diagnostic capabilities for maximum uptime.

• The VSM enables customization of truck performance to suit application needs.

6

CANbus communication system, keeping a constant check on the unit and vital components.


The VSM enables customization of truck performance to suit application needs.


• The VSM enables customization of truck performance to suit application needs.

6

AC Traction Motor

Superior Serviceability

• The E80-120XN series utilizes CANbus communications to simplify wiring and improve serviceability.

• State-of-the-art onboard diagnostics reduce repair time and minimize expensive parts swapping.

• A two-piece fl oor plate and side plates can be easily removed for unrestricted service access. The lift-out � oor plates require no tools, for quick and easy daily operator checks.

• Easy battery access is provided via the spring-assisted hood and quick release handle. The rear counter weight service cover is easily removed by removing two screws.

Supporting Customers with World-Class Parts & Service

Four Parts Distribution Centers strategically located around the world provide a full range of original equipment and aftermarket parts that help maintain our customers’ uptime. In fact, our Guaranteed Availability Program en sures that parts for all lift trucks within two years of age are available within 24 hours, 100% of the time.*

We also take that commitment into the � eld with the Hyster CERTECH® Certi� cation training program, available to our dealers’ technicians. This technical training program provides both systems level as well as product-speci� c education to ensure lift trucks are repaired right the � rst time.

A spring-assisted hood and quick release handle make battery access easier than ever.

7

Easy-to-remove � oor plates allow full-service access for simpli� ed daily maintenance.

* Contact your local dealer for program details.

The superior ergonomic design of the E80-120XN means greater comfort for your operator. Enhanced

ergonomics combined with customizable performance characteristics increase overall productivity and uptime.

Superior Operator Compartment

• An 11 percent increase in � oor space creates the largest � oor space among leading competitors for its capacity and promotes improved operator comfort, while the widened overhead guard legs allow for greater visibility.

• The Operator Convenience Station features an industry-leading dash storage area that provides the operator with a productive work environment and dedicated storage areas for markers, cell phone, pick tickets, beverages and almost anything else an operator needs.

• The easy-to-use 3-point entry design of the operator compartment uses a large molded hand grip, hip restraint and an open non-slip lowered step height to minimize muscle and joint strain during entry and exit.

• High-comfort seat conforms to the operator to reduce operator fatigue and maximize ergonomics. They offer no-cinch ELR seat belts and 6 inches of fore/aft adjustment with 13 latching positions. The optional full suspension seat features an adjustable seat back and weight adjustment control. The optional swivel seat provides 6 degrees left swivel and 12 degrees right swivel.

ERGONOMICS

Superior comfort comes standard.

8

Operator Convenience Station

3-Point Entry Design

High-Comfort Seat

Low-Effort Operation

• The Automatic Park Brake Option automatically applies the parking brake when the truck is stationary and releases it when the accelerator pedal is depressed. Power-assisted braking improves brake life while reducing operator effort.

• The standard 12-inch steering wheel with integrated spinner knob reduces fatigue while providing more knee room and offers superior ef� ciency, maneuverability and control.

• An in� nitely adjustable tilt steer column provides increased comfort while minimizing fatigue. The optional telescopic steer column with tilt memory provides enhanced adjustability to accommodate the full operator size range.

• Improved brake pedal layout allows actuation with either foot and the Auto Deceleration System signi� cantly reduces operator fatigue.

• Rear drive handle (optional) is excellent for reverse driving while giving ready access to the auxiliary horn button for use when approaching cross-aisles and pedestrian traf� c areas.

Hydraulic Controls

• Choose from two con� gurations that employ seat side hydraulic levers or TouchPoint mini-levers to provide unsurpassed, low effort, tactile control of all hydraulic functions.

• Optional Electro-Hydraulic Controls with TouchPoint mini-levers provide precise � ngertip control of all hydraulic functions. An adjustable armrest with palm rest, mounted on the operator seat, positions the mini-levers in the optimal position.

• The armrest is cushioned and contoured to provide full forearm support. The hydraulic functions, seat side directional control switch, horn and battery disconnect button are all incorporated in the armrest and designed to maximize operator comfort and ease of use.

9

Electro-Hydraulic Controls with TouchPoint Mini-Levers Rear Drive Handle

PRODUCTIVITY

The Hyster® E80-120XN works harder, longer and faster without compromising safety to make it one of

the most productive lift trucks in the industry. The end result is a lift truck that increases throughput

and sales volume while reducing operating costs.

Superior Operator Control

• Mast provides fast lift and lower speeds combined with superb visibility.

• The optional Hyster-designed integral sideshift provides excellent visibility and affords greater capacities than carriage mounted sideshifts.

• Low-effort ergonomics and intuitively-located controls provide superior operator comfort minimizing fatigue and maximizing productivity.

• The seat side directional control and the Hyster exclusive MONOTROL® pedal each provide for quicker, smoother control of travel speed and direction, improving operator ef� ciency and bolstering productivity.

• On-demand hydrostatic steering provides low-effort steering and superior control with reduced noise.

• The multifunction display features a large LCD backlit screen that shows truck status for quick and easy diagnostics.

Only 24 hours in a day. Make the most of them.

10

MONOTROL Pedal Seat Side Directional Control Multifunction Display

Performance Modes

• An adjustment of customizable performance parameters to match your application needs is accessible via the multifunction display and technician password protection.

• A signi� cant increase in loaded travel speeds and acceleration rates beyond the standard setting is possible when the “Extended Shift” setting is turned off.

• Our standard “Extended Shift” AC controller setting provides the optimum balance between performance needs and battery shift life.

AC Technology

• AC Technology delivers quick and smooth changes in travel direction and offers precise speed control with excellent acceleration thereby signi� cantly increasing productivity potential.

• The standard “Extended Shift” feature allows enhanced run time without recharging over longer periods.

• The Hyster-designed thermal management system maximizes performance during continuous operation, while preventing damage to components due to heat.

The Hyster-designed thermal management system maximizes performance during continuous operation, The Hyster-designed thermal management system maximizes performance during continuous operation, The Hyster-designed thermal management system maximizes performance during continuous operation, The Hyster-designed thermal management system maximizes performance during continuous operation,

The standard “Extended Shift” feature allows enhanced run time without recharging over longer periods. The standard “Extended Shift” feature allows enhanced run time without recharging over longer periods. The standard “Extended Shift” feature allows enhanced run time without recharging over longer periods. The standard “Extended Shift” feature allows enhanced run time without recharging over longer periods.

AC Technology delivers quick and smooth changes in travel direction and offers precise speed AC Technology delivers quick and smooth changes in travel direction and offers precise speed AC Technology delivers quick and smooth changes in travel direction and offers precise speed

Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance Our standard “Extended Shift” AC controller setting provides the optimum balance between performance

A signi� cant increase in loaded travel speeds and acceleration rates beyond the standard setting

Our standard “Extended Shift” AC controller setting provides the optimum balance between performance







An adjustment of customizable performance parameters to match your application needs is accessible
















An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible via the multifunction display and technician password protection.

An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible An adjustment of customizable performance parameters to match your application needs is accessible

11

Hyster® E80-120XN series trucks are built for superior stability, so operators can trust them with tall loads,

long loads and all loads in-between. Our patented Hyster Stability System (HSS™) is built into the fundamen-

tal design of every truck—it’s not “added on” like other manufacturers—to allow for articulation on uneven

surfaces and to minimize truck lean for enhanced lateral stability.

• Hyster Stability System is a 100% maintenance-free design.

• Its “Passive” mechanical system uses gravity to optimize steer-axle geometry.

• Trunnion-mounted masts increase long load center handling.

• Mast channels built with one-piece, high-strength rolled steel.

• Load rollers are canted at 3 degrees to resist forward/backward movement.

Handles the heaviest loads with ease.

No two working environments are exactly alike.

That’s why Hyster Company gives you the option

of tailoring your lift truck’s performance and features

to your application. Customize speed settings and

directional control methods. And take advantage of

Extended Shift functionality to maximize productivity.

No matter what truck con� guration you choose,

your Hyster® lift truck will work as long and as

hard as you do.

Customized performance for any application.

12

PERFORMANCE

13

Superior Trucks. Superior Options.

• Application environmental construction

— Standard construction

• Operating temperatures: +32 °F to +120 °F

— Cooler/freezer package option

• Operating temperatures: 0 °F to +120 °F

• Return to Set Tilt Option brings the load to a preset position when tilting for easy operation.

• Operator Selectable Performance Modes allow varying levels of truck performance.

• Rapid Charge Option further improves productivity by eliminating battery changes.

• 36-, 48- or 80-volt systems provide excellent performance.

• 80-volt control system option for maximum performance in long-haul applications.

• Extended Shift can be disabled for increased productivity levels.

Customized performance for any application.

WWW.HYSTER.COM

E80-120XN SERIESTECHNICAL GUIDE

2

E80-120XN DIMENSIONS

Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).

100

** E80XN = 20° E80XNS = 20° E80XN = 18.5° E120XN = 18.5°

* E80XN = 27° E80XNS = 20° E80XN = 20° E120XN = 20°

**

6º

*

11

48

11

23

6

25 2826

24

27

18

49

16

17

SIP

(length)

C

b11

29

30

101019 40”

48”

30

3

E80XN SPECIFICATIONS

CERTIFICATION: Hyster® lift trucks meet the design and construction requirements of B56.1-1969, per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.

Above specifications, unless otherwise listed, are for a standard truck without optional equipment.Right Angle Stack and Equal Intersecting Aisle dimensions provided with a 48” long and 40” wide pallet load, allowing zero clearance.

GEN

ERA

L

1 Manufacturer Hyster2 Model Designation E80XN3 Power Electric4 Operation Sit5 Rated Capacity lb (kg) 8000 (3629)6 Load Center in (mm) 24 (610)

TIRE

S/W

HEEL

S

7 Tire Type - Cushion, Solid, Pneumatic, etc. Drive/Steer Cushion/Cushion8 Tire Size Drive/Steer in 22 x 9 x 16/18 x 6 x 12.19 Wheels - Number X=Driven Drive/Steer 2X/2

10 Tread Center of Tires Narr Dr/Wide Dr/Steer in (mm) 37/41/39.5 (941/1041/1003)

DIM

ENSI

ON

S

11 Mast Tilt Std Opt degrees 5F/5B 8F/5B12 Mast - Lowered Height Std Mast in (mm) 84.1 (2134)13 Free Lift - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 5 (150) Opt 2 Stg Full Free Lift Mast with/without LBR in (mm) 35/53 (900/1352)

14 Lift Height - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 120 (3050)15 Mast - Extended Height Std Mast with/without LBR in (mm) 169/149 (4284/3783)16 Overhead Guard Height Std/Opt/Opt Flat Plate in (mm) 94/91/87.1 (2388/2311/2212)17 SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel in (mm) 37.3/36.3/36.2 (949/924/922)18 Tow Pin Height Vertical Center of Pin in (mm) 12.7 (324)19 Overall Width Standard Tread/Wide Tread in (mm) 47.2/50 (1200/1270)20 Forks Thickness x Width x Length in (mm) 2 x 4.9 x 42 (50 x 125 x 1067)21 Standard Carriage Width Class III in (mm) 42 (1067)22 Floor to Top of Battery Rollers in (mm) 20 (509)23 Ground Clearance Lowest Point NL/RL in (mm) 3.8/3.5 (96/90)24 Ground Clearance Center of Truck NL/RL in (mm) 5.3/5.1 (134/130)25 Load Distance Center of Wheel to Face of Forks in (mm) 17.6 (447)26 Battery Compartment Height Without/With Battery Rollers in (mm) 24.5/24 (622/609) Width in (mm) 45.4 (1152) Nominal SIZE 39 Length Actual in (mm) 39.2 (996)27 Length to Face of Forks Chassis Length in (mm) 96.5 (2451)28 Wheelbase in (mm) 62 (1574)29 Right Angle Stack in (mm) 150.8 (3831)30 Equal Aisle 90˚ Intersecting Aisle in (mm) 79.4 (2017)31 Outside Turning Radius in (mm) 85.2 (2165)

WEI

GH

T 32 Truck Weight Without Battery NL lb (kg) 11070 (5021)33 Axle Loading - Drive Static with Max. Wt. Battery NL/RL lb (kg) 6728/20098 (3052/9116)34 Axle Loading - Steer Static with Max. Wt. Battery NL/RL lb (kg) 9141/3771 (4146/1710)

PERF

ORM

AN

CE

Standard Performance VOLTS 36 48 80

36 Travel Speed Extended Shift OFF NL/RL mph (km/h) 11.2/9.9 (18/15.9) 11.7/11.4 (18.8/18.3) 11.7/11.2 (18.8/18) Extended Shift ON NL/RL mph (km/h) 9/8.1 (14.5/13) 10.9/10.4 (17.5/16.7) 10.9/10.8 (17.5/17.4)37 Lift Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 94/58 (0.48/0.296) 118/73 (0.6/0.37) 118/73 (0.6/0.37) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 85/53 (0.4336/0.267) 107/66 (0.542/0.334) 107/66 (0.542/0.334) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 88/54 (0.448/0.276) 110/68 (0.56/0.345) 110/68 (0.56/0.345)38 Lower Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 94/104 (0.48/0.53) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 75/91 (0.38/0.46) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 77/98 (0.39/0.5)39 Gradeability 5 Minute Rating NL/RL % 23/14.1 29.3/17.8 30.1/18.3 60 Minute Rating NL/RL % 8.4/5.4 10.6/6.8 10.9/740 Drawbar Pull 5 Minute Rating NL/RL lbf 3327/3193 4023/3864 4104/3941 60 Minute Rating NL/RL lbf 1246/1232 1511/1497 1541/1526

41 Brake Method of Control Service/Parking Hydraulic/Spring Applied Method of Operation Service/Parking Foot/Automatic

ELEC

TRIC

42 Battery Type Lead Acid Standard Performance VOLTS 36 48 80

43 Traction Motor 60 Minute Rating hp (kW) 28.8 (21.5) 28.8 (21.5) 28.2 (21)44 Pump Motor 15 % Rating hp (kW) 35.5 (26.5) 48.3 (36) 48.3 (36)45 Traction Motor Type/Control Method AC/Transistor46 Pump Motor Type/Control Method AC/Transistor47 Number of Speeds Traction/Pump Infinitely Variable/Infinitely Variable

OTH

ER

48 Step Height in (mm) 21.1 (536)49 Floor Height Lowest Point in (mm) 33.7 (855)50 Attachment Relief Pressure psi (bar) 2250 (155)51 Auxiliary Oil Flow 3rd and 4th Function gal/min (l/min) 16 (60)52 Sound Level Measured per ANSI B56.11.5 dB (A) 69/66

4

E100XNS DIMENSIONSG

ENER

AL

1 Manufacturer Hyster2 Model Designation E100XNS3 Power Electric4 Operation Sit5 Rated Capacity lb (kg) 10000 (4536)6 Load Center in (mm) 24 (610)

TIRE

S/W

HEEL

S


10 Tread Center of Tires Narr Dr/Wide Dr/Steer in (mm) 40/43.9/38.3 (1015/1115/972)

DIM

ENSI

ON

S

11 Mast Tilt Std Opt degrees 5F/5B 8F/5B12 Mast - Lowered Height Std Mast in (mm) 85 (2138)13 Free Lift - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 5 (150) Opt 2 Stg Full Free Lift Mast with/without LBR in (mm) 35/48 (897/1222)

14 Lift Height - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 109 (2790)15 Mast - Extended Height Std Mast with/without LBR in (mm) 159/144 (4031/3657)16 Overhead Guard Height Std/Opt/Opt Flat Plate in (mm) 94/91/87.1 (2388/2311/2212)17 SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel in (mm) 37.3/36.3/36.2 (949/924/922)18 Tow Pin Height Vertical Center of Pin in (mm) 12.7 (324)19 Overall Width Standard Tread/Wide Tread in (mm) 52/55.9 (1320/1420)20 Forks Thickness x Width x Length in (mm) 2 x 5.9 x 42 (50 x 150 x 1067)21 Standard Carriage Width Class III in (mm) 42 (1067)22 Floor to Top of Battery Rollers in (mm) 20 (509)23 Ground Clearance Lowest Point NL/RL in (mm) 3.6/3.4 (92/87)24 Ground Clearance Center of Truck NL/RL in (mm) 5.3/5.1 (134/130)25 Load Distance Center of Wheel to Face of Forks in (mm) 17.8 (452)26 Battery Compartment Height Without/With Battery Rollers in (mm) 24.5/24 (622/609) Width in (mm) 45.4 (1152) Nominal SIZE 39" Length Actual in (mm) 39.2 (996)27 Length to Face of Forks Chassis Length in (mm) 100.3 (2548)28 Wheelbase in (mm) 62 (1574)29 Right Angle Stack in (mm) 154 (3911)30 Equal Aisle 90˚ Intersecting Aisle in (mm) 83 (2107)31 Outside Turning Radius in (mm) 88.2 (2240)

WEI

GH


PERF

ORM

AN

CE

Standard Performance VOLTS 36 48 8036 Travel Speed Extended Shift OFF NL/RL mph (km/h) 10.3/8.8 (16.6/14.2) 11.4/11 (18.3/17.7) 11.4/11 (18.3/17.7) Extended Shift ON NL/RL mph (km/h) 8.8/7.6 (14.2/12.3) 10.9/9.9 (17.5/15.9) 10.9/9.9 (17.5/15.9)37 Lift Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 71/46 (0.36/0.232) 89/57 (0.45/0.29) 89/57 (0.45/0.29) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 67/43 (0.34/0.219) 84/54 (0.425/0.274) 84/54 (0.425/0.274) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 68/44 (0.346/0.223) 85/55 (0.433/0.279) 85/55 (0.433/0.279)38 Lower Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 73/89 (0.37/0.45) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 57/81 (0.29/0.41) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 63/87 (0.32/0.44)39 Gradeability 5 Minute Rating NL/RL % 19.4/11.8 24.6/14.7 25.2/15.1 60 Minute Rating NL/RL % 7.1/4.5 9.1/5.6 9.2/5.840 Drawbar Pull 5 Minute Rating NL/RL lbf 3323/3185 3994/3832 4074/3909 60 Minute Rating NL/RL lbf 1242/1224 1497/1479 1527/150941 Brake Method of Control Service/Parking Hydraulic/Spring Applied Method of Operation Service/Parking Foot/Automatic

ELEC

TRIC

42 Battery Type Lead Acid Standard Performance VOLTS 36 48 8043 Traction Motor 60 Minute Rating hp (kW) 28.8 (21.5) 28.8 (21.5) 28.2 (21)44 Pump Motor 15 % Rating hp (kW) 35.5 (26.5) 48.3 (36) 48.3 (36)45 Traction Motor Type/Control Method AC/Transistor46 Pump Motor Type/Control Method AC/Transistor47 Number of Speeds Traction/Pump Infinitely Variable/Infinitely Variable

OTH

ER




5

E100XN SPECIFICATIONSG

ENER

AL


TIRE

S/W

HEEL

S



DIM

ENSI

ON

S


14 Lift Height - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 109 (2790)15 Mast - Extended Height Std Mast with/without LBR in (mm) 159/144 (4031/3657)16 Overhead Guard Height Std/Opt/Opt Flat Plate in (mm) 94/91/87.1 (2388/2311/2212)17 SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel in (mm) 37.3/36.3/36.2 (949/924/922)18 Tow Pin Height Vertical Center of Pin in (mm) 12.7 (324)19 Overall Width Standard Tread/Wide Tread in (mm) 52/55.9 (1320/1420)20 Forks Thickness x Width x Length in (mm) 2 x 5.9 x 42 (50 x 150 x 1067)21 Standard Carriage Width Class III in (mm) 42 (1067)22 Floor to Top of Battery Rollers in (mm) 20 (509)23 Ground Clearance Lowest Point NL/RL in (mm) 3.6/3.4 (92/87)24 Ground Clearance Center of Truck NL/RL in (mm) 5.3/5.1 (134/130)25 Load Distance Center of Wheel to Face of Forks in (mm) 17.8 (452)26 Battery Compartment Height Without/With Battery Rollers in (mm) 24.5/24 (622/609) Width in (mm) 45.4 (1152) Nominal SIZE 45" Length Actual in (mm) 45.7 (1161)27 Length to Face of Forks Chassis Length in (mm) 103.1 (2621)28 Wheelbase in (mm) 68.5 (1739)29 Right Angle Stack in (mm) 158 (4012)30 Equal Aisle 90˚ Intersecting Aisle in (mm) 84.3 (2141)31 Outside Turning Radius in (mm) 92.2 (2341)

WEI

GH


PERF

ORM

AN

CE

Standard Performance VOLTS 36 48 8036 Travel Speed Extended Shift OFF NL/RL mph (km/h) 10.3/8.8 (16.6/14.2) 11.4/11 (18.3/17.7) 11.4/11 (18.3/17.7) Extended Shift ON NL/RL mph (km/h) 8.8/7.6 (14.2/12.3) 10.9/9.9 (17.5/15.9) 10.9/9.9 (17.5/15.9)37 Lift Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 71/46 (0.36/0.232) 89/57 (0.45/0.29) 89/57 (0.45/0.29) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 67/43 (0.34/0.219) 84/54 (0.425/0.274) 84/54 (0.425/0.274) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 68/44 (0.346/0.223) 85/55 (0.433/0.279) 85/55 (0.433/0.279)38 Lower Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 73/89 (0.37/0.45) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 57/81 (0.29/0.41) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 63/87 (0.32/0.44)39 Gradeability 5 Minute Rating NL/RL % 19.9/11.9 25.2/15 25.8/15.3 60 Minute Rating NL/RL % 7.3/4.5 9.2/5.7 9.4/5.940 Drawbar Pull 5 Minute Rating NL/RL lbf 3322/3185 3970/3809 4049/3885 60 Minute Rating NL/RL lbf 1241/1224 1488/1470 1518/150041 Brake Method of Control Service/Parking Hydraulic/Spring Applied Method of Operation Service/Parking Foot/Automatic

ELEC

TRIC


OTH

ER




6

E120XN DIMENSIONSG

ENER

AL


TIRE

S/W

HEEL

S



DIM

ENSI

ON

S


14 Lift Height - Top of Fork Std 2 Stg Limited Free Lift Mast in (mm) 109 (2790)15 Mast - Extended Height Std Mast with/without LBR in (mm) 159/144 (4031/3657)16 Overhead Guard Height Std/Opt/Opt Flat Plate in (mm) 94/91/87.1 (2388/2311/2212)17 SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel in (mm) 37.3/36.3/36.2 (949/924/922)18 Tow Pin Height Vertical Center of Pin in (mm) 12.7 (324)19 Overall Width Standard Tread/Wide Tread in (mm) 52/55.9 (1320/1420)20 Forks Thickness x Width x Length in (mm) 2.4 x 5.9 x 42 (60 x 150 x 1067)21 Standard Carriage Width Class III in (mm) 42 (1067)22 Floor to Top of Battery Rollers in (mm) 20 (509)23 Ground Clearance Lowest Point NL/RL in (mm) 3.6/3.4 (92/87)24 Ground Clearance Center of Truck NL/RL in (mm) 5.3/5.1 (134/130)25 Load Distance Center of Wheel to Face of Forks in (mm) 18.2 (462)26 Battery Compartment Height Without/With Battery Rollers in (mm) 24.5/24 (622/609) Width in (mm) 45.4 (1152) Nominal SIZE 45" Length Actual in (mm) 45.7 (1161)27 Length to Face of Forks Chassis Length in (mm) 107.2 (2724)28 Wheelbase in (mm) 68.5 (1739)29 Right Angle Stack in (mm) 161.5 (4101)30 Equal Aisle 90˚ Intersecting Aisle in (mm) 85.7 (2178)31 Outside Turning Radius in (mm) 95.3 (2420)

WEI

GH


PERF

ORM

AN

CE

Standard Performance VOLTS 36 48 8036 Travel Speed Extended Shift OFF NL/RL mph (km/h) 9.4/8 (15.1/12.9) 10.4/10.4 (16.7/16.7) 10.4/10.4 (16.7/16.7) Extended Shift ON NL/RL mph (km/h) 8.2/7 (13.2/11.3) 10.4/9 (16.7/14.5) 10.4/9 (16.7/14.5)37 Lift Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 71/43 (0.36/0.216) 89/53 (0.45/0.27) 89/53 (0.45/0.27) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 67/40 (0.34/0.204) 84/50 (0.425/0.255) 84/50 (0.425/0.255) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 68/41 (0.346/0.208) 85/51 (0.433/0.26) 85/51 (0.433/0.26)38 Lower Speed Std 2 Stg LFL Mast NL/RL ft/min (m/sec) 73/89 (0.37/0.45) Opt 2 Stg FFL Mast NL/RL ft/min (m/sec) 57/81 (0.29/0.41) Opt 3 Stg FFL Mast NL/RL ft/min (m/sec) 63/87 (0.32/0.44)39 Gradeability 5 Minute Rating NL/RL % 18.5/10.4 22.8/13.1 23.3/13.4 60 Minute Rating NL/RL % 6.6/4 8.3/5.1 8.5/5.140 Drawbar Pull 5 Minute Rating NL/RL lbf 3320/3179 3918/3755 3996/3830 60 Minute Rating NL/RL lbf 1239/1218 1466/1445 1495/147441 Brake Method of Control Service/Parking Hydraulic/Spring Applied Method of Operation Service/Parking Foot/Automatic

ELEC

TRIC


OTH

ER




7

MAST DIMENSIONS AND BATTERY SPECIFICATIONS

BATTERY AND COMPARTMENT SPECIFICATIONS

Truck Model

Battery Compartment Dimensions Battery Dimensions and Specifications

Volts No. of Cells

Plates per Cell

Max Capacity 6 Hour Rate

Weight

Width Length Height "X" "Y" "Z" Min Max

in (mm) in (mm) amp hr (kwh) lb (kg)

E80XNE100XNS

39” Compartment45.4 (1152) 39.2 (996) 24.5 (622) 45 (1143) 39 (990) 23.9 (608)

36 18 33 2300 (80.3)

3400 (1542) 4800 (2177)48 24 29 1800 (83.8)

80 40 15 1000 (77.6)

E100XNE120XN

45” Compartment45.4 (1152) 45.7 (1161) 24.5 (622) 45 (1143) 45.3 (1150) 23.9 (608)

36 36 19 2300 (160.6)

4000 (1814) 5500 (2517)48 24 33 1800 (83.8)

80 40 17 1000 (77.6)

E80XN MAST DIMENSIONSMaximum Fork Height

(TOF) + Overall Lowered Ht. Overall Extended Height w/Load Backrest

Overall Extended Height w/o Load Backrest

Free-Lift (TOF) w/ Load Backrest

Free-Lift (TOF) w/o Load Backrest

in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)

2-STAGE LIMITED FREE-LIFT (LFL) MAST

120 (3050) 84 (2134) 176 (4455) 149 (3783) 5 (150) 5 (150)

143 (3650) 96 (2434) 193 (4884) 173 (4383) 5 (150) 5 (150)

2-STAGE FULL FREE-LIFT (FFL) MAST

121 (3075) 84 (2134) 170 (4309) 152 (3857) 35 (900) 53 (1352)

144 (3675) 96 (2434) 194 (4909) 176 (4457) 47 (1200) 65 (1652)


173 (4415) 84 (2134) 223 (5649) 205 (5197) 35 (900) 53 (1352)

185 (4715) 88 (2234) 235 (5949) 217 (5497) 39 (1000) 57 (1452)

194 (4950) 92 (2334) 244 (6184) 226 (5732) 43 (1100) 61 (1552)

218 (5550) 100 (2534) 268 (6784) 250 (6332) 51 (1300) 69 (1752)

Battery Notes – Conventional Charging (Opt G26201)Battery Connector: 36 volt - Grey SB®350 (Anderson Power Products® P/N 6320G2 or equivalent) 48 volt - Blue SB®350 (Anderson Power Products® P/N 6321G2 or equivalent) 80 volt - Black SBE®320 (Anderson Power Products® P/N E6359G3 or equivalent)Handle (not required): SB®350 and SBE®320 (Anderson Power Products®: “A” TYPE (Grey) P/N 995G2 or equivalent)Battery Lead: Length 20” (508 mm), Position “B”, 4/0 AWG

Battery Notes – Rapid/Fast Charging (Opt G26202)Battery Connector: Requires Dual Positive / Negative Cabling terminating in (2) Female EBC-320 DIN Connectors(Anderson Power Products® P/N E32504-00X9 or equivalent)Each individual DIN connector to include 1 Red Conductor to (+) and 1 black conductor to (-)Battery Lead: Length 25” (635 mm), Position “B”, Minimum Cable Size 4/0 AWG

Battery Type: “EO” (Without Cover)Battery amp hr (kwh) capacity is max allowable per ULCommercially available lead acid batteries may not necessarily

reach these max limitsBattery Roller option reduces battery compartment height to 24.0”

(609mm) & max battery height to 23.4” (595mm)Battery Compartment Length is measured front to rear. Battery

Compartment Width is measured across the truck

E100XNS, E100XN, E120XN MAST DIMENSIONSMaximum Fork Height

(TOF) + Overall Lowered Ht. Overall Extended Height w/Load Backrest

Overall Extended Height w/o Load Backrest

Free-Lift (TOF) w/ Load Backrest

Free-Lift (TOF) w/o Load Backrest

in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)

2-STAGE LIMITED FREE-LIFT (LFL) MAST

109 (2790) 85 (2138) 159 (4031) 144 (3657) 5 (150) 5 (150)

133 (3390) 96 (2438) 183 (4631) 168 (4257) 5 (150) 5 (150)

157 (3990) 108 (2738) 206 (5231) 192 (4857) 5 (150) 5 (150)


110 (2815) 85 (2138) 160 (4056) 147 (3731) 35 (897) 48 (1222)

134 (3415) 96 (2438) 184 (4656) 171 (4331) 47 (1197) 59 (1522)


162 (4137) 85 (2138) 212 (5378) 200 (5058) 35 (897) 47 (1217)

184 (4690) 92 (2338) 234 (5931) 221 (5611) 43 (1097) 55 (1417)

208 (5290) 100 (2538) 258 (6531) 245 (6211) 51 (1297) 63 (1617)

Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006Part No. E80-120XN/TG12/2017 Litho in U.S.A. Trucks may be shown with optional equipment. © 2017 Hyster Company. All rights reserved.

Hyster, , and STRONG PARTNERS. TOUGH TRUCKS. and MONOTROL are registered trademarks in the United States and certain other jurisdictions. Hyster products are subject to change without notice.

Visit us online at www.hyster.com or call us at 1-800-HYSTER-1.

STANDARD EQUIPMENT• 2-stage limited free lift (LFL) mast with maximum fork height of

120” (3050mm) (E80XN) or 109” (2790mm) (E100-120XN)• 5° forward and 5° back mast tilt• 42” (1067mm) wide Class III (E80XN) or Class IV (E100-120XN)

hook-type carriage with 48” (1219mm) high load backrest extension• 42” (1067mm) long forks• Smooth tread rubber drive tire and steer tire• Battery compartment size (length)

– 39” (E80XN-100XNS)– 45.5” (E100-120XN)

• Lift out battery extraction• 36 volt electrical system• Standard construction• UL Classification Type “E”• 12” steering wheel with integral spinner knob• On-demand hydrostatic power assist steer system• Non-suspension vinyl seat• Black ELR non-cinch seat belt• Auto park brake• Key switch start• 94” grid style overhead guard• MONOTROL® Foot Direction Control• 3 function hydraulic control valve w/seat side mechanical levers• AC traction and pump motors (completely brushless)• Transistor drive and pump control• Advanced VSM (Vehicle System Manager)• Progressive thermal management system• Fully integrated CANbus communication• Hyster Stability System (HSS®)• Power assist braking• Auto Deceleration System with regenerative braking• Multifunction display

– Battery state of charge indicator with lift interrupt– Hour meters – traction motor, lift pump motor and truck– Performance mode indicator– Direction indicator– Fault indicator (audible & visible)– 4 operator selectable, programmable performance modes

• Easy ingress/egress w/low step height and contoured handhold• Operator convenience station• Adjustable tilt steering column• Anti-cinch operator restraint system• Operator presence system• Cushioned floormat• Static strap• Tow pin• Seatside power disconnect button• On-board software

– Program, test & diagnose– Password protected

• Electronic horn with integral relay• 12 month / 2,000 hour full truck warranty• 24 month / 4,000 hour powertrain warranty• Operating manual

OPTIONAL EQUIPMENT:• Side extraction battery removal with rollers• 48 or 80 volt electrical system• Rapid / fast charge• Cooler / freezer package• UL Classification Type “EE”• Available with 2-stage limited free lift (LFL) and 2- or 3-stage full

free lift (FFL) masts• Carriage with integral sideshift• Attachment carriages (E100XN/XNS)• Mast tilt option – 8° forward / 5° back• Return to set tilt• Accumulator• TouchPoint hydraulic mini-levers with fully adjustable armrest• 4 function hydraulic control valve• Non-marking, rubber, or lug tread tires• Wide tread tires• Non-suspension seat (cloth)• Full suspension seat (vinyl or cloth)• Swivel seat, full suspension (vinyl or cloth)• 91” grid style overhead guard• 87” flat plate overhead guard• Keyless start (with auxiliary key switch)• Seat side directional control• Telescopic steering column with tilt memory• LED and halogen work light packages• LED dome / reading light• LED brake / tail / back-up light packages• Audible reverse activated alarm• Visible amber strobe light - continuous activated, overhead guard

mounted• Rear drive handle with integrated horn button• Mirrors – dual rear view or single panoramic• Load weight indicator• Impact monitor• Operator password• Operator daily checklist• System monitor – hydraulic low fluid level indicator and hydraulic

filter service indicator• Hydraulic attachment extension tubes with and without quick

disconnect fittings• Maintenance reminder• Fire extinguisher – 2.5 lb. dry chemical• Red, high-visibility Emergency Locking Retractor (ELR) non-cinch

seat belt with or without start interlock• Low mount display

e80-120xn series

Documents