eads ccq-new presentation
DESCRIPTION
presentationTRANSCRIPT
European AeronauticDefense and Space Center
1
4,910 (4.1%) Airbus Military
7,405 (6.3%) Headquarters & Others
Eurocopter 15,667 (13.2%)
Defence & Security
22,787 (19.2%)
EADS Astrium
13,674 (11.5%)
53,906 (45.5%) Airbus
About EADS Group
The European Aerospace Defence and Space Company (EADS) was founded in July 2000. It is today the second-largest group in the global aerospace and defence industry, with a unique range of products and services. The group includes Airbus , Eurocopter, Astrium and Cassidian.
• 140,405 Employees in 2012• 56,5 m€ Revenues in 2012
2
AIRBUS is the leading commercial and military transport aircraft manufacturer, offering the most modern civil airliners in the market
CASSIDIAN is a worldwide leader in state state-of-the-art solutions for armed forces and civil security, and the major partner in the Eurofighter consortium.
ASTRIUM, the European leader in space programmes, is active in all space activities, from large-scale space systems to satellite services
EUROCOPTER is the world’s primary helicopter manufacturer in the civil sector, offering the largest civil and military helicopters in the world.
About EADS Group
3
EADS Competence Center of Qatar QSTP-LLC
What we Share Make us Strong
Lab Presentation Rev.03 - 01 Dec 2013
Aeronautical
Maritime Chemistry
Oil & GasConstruction
4
Lab Presentation Rev.03 - 01 Dec 2013
Organization Structure
GENERAL MANAGER-QATAR
ADMINISTRATIVE SUPPORT
EADS FRANCE
CHAIRMAN-
EADS MIDDLE EAST
RESEARCH &
DEVELOPMENT
TRAINING & CONSULTING
EADS CCQ LABORATORY
5
OUR VISION
To be the leading National centre for the provision of state of the art solutions to the Qatari industries through research, knowledge creation and transfer as well as applications in line with the vision of the country whilst maintaining the highest integrity and environmental consciousness.
OUR MISSION
To address the challenges and opportunities facing the Qatari industries, and contribute to the development of Qatar in line with the 2030 vision.
Lab Presentation Rev.03 - 01 Dec 2013
VISION AND MISSION
6
Established in 2007, EADS CCQ QSTP-LLC serves the Qatar industrial community with a wide range of high-quality, expedient and cost-competitive Research, consultancy, servicing and Training services with high degree of quality, performance and customer services
A state-of-the-art Mechanical and metallurgical testing laboratory accredited to ISO 17025:2005 by Dubai Accreditation Center (DAC), Dubai, a full member and MRA Signatory of the International Laboratory Accreditation Cooperation (ILAC). A Qatar Petroleum(QP) approved laboratoryAlso approved by Dolphin Energy, QCHEM, Qatargas, Rasgas etc.A 300m2 facility exclusively dedicated to the characterization of materials and assemblies.
Research & Consultancy
Training & Outreach
Servicing
About EADS CCQ QSTP-LLC
7
Polytec (EU)
NI (MENA)
R-Tech and Metamet (UK)
K-KEM (Saudi Arabia)
Resato (Holland)
MTC (UK, UAE)
QACPE (Qatar)
Williams F1
ApsysLab Presentation Rev.03 - 01 Dec 2013
Our PARTNERSHIPS
Currently, EADS CCQ partners with various companies across the world in the field of Research, Testing and Consulting. Some of our major partners are:
8
MAJOR PROJECTS & CLIENTS
RESEARCH
NPRP project on Cathodic Disbonding Project on Cookwares for QGOSM
LABORATORY
GSF project in Mesaieed and Dukhan Non-destructive testing for Musherib project, Doha. Barzan project in Ras Laffan (Ongoing) Destructive testing services for QATARGAS PMP project for TCJV at Ras Laffan Industrial city Kempe Qatar for QATALUM Al Jaber for Lusail project Target Rotary for CP10 New Doha International Airport Procedure &Welder qualifications for GASCO Destructive testing services for DOPET, QCON, TRAGS, NKOM, MADINA, AMMICO, Galfar Al Misnad etc. Replica Metallography on-site for various shutdowns and projects for Qchem, Qatargas and Qatar Petroleum.
9
Development of a non-intrusive hydrates detection and localisation system for offshore pipelinesThe use of Ohmic heating in the food processing industry
Coatings in corrosive media
Renewable energy on gas platforms
Drug delivery to central nervous system
Human factors engineering of systems of systems: multimodal multi-agent interfacesDust loading and air pollution management
RESEARCH & DEVELOPMENT
10
Mechanical Testing
1. Universal Tensile machine
2. Bending machine
3. Impact test machine (Charpy)
4. Hardness testing machine
Metallurgical Testing
5. Macro /Micro examination
6. Chemical analysis
Corrosion Testing
7. Potentiostat / galvnostat
8. Salt Spray test
9. Cathodic Disbondment test
Non Destructive Testing
Sample Preparation Area
Lab Presentation Rev.03 - 01 Dec 2013
SERVICE PROVISION
11
A state-of-the-art Mechanical and metallurgical testing laboratory accredited to ISO 17025:2005 by Dubai Accreditation Center (DAC), Dubai, a full member and MRA Signatory of the International Laboratory Accreditation Cooperation (ILAC). A Qatar Petroleum(QP) approved laboratoryAlso approved by Dolphin Energy, QCHEM, Qatargas, Rasgas etc.A 300m2 facility exclusively dedicated to the characterization of materials and assemblies. Our capabilities include:
• Mechanical Testing-
Impact, Bend, Rebend, Tensile, Hardness• Metallographic testing-
Sample cross sectioning, mounting, grinding, polishing, etching, macro/microstructural analysis, weld/material analysis
• Corrosion testing• Chemical analysis of metallic materials• Failure Analysis• In-situ Metallographic replica analysis• Non-destructive testing
Lab Presentation Rev.03 - 01 Dec 2013
EADS CCQ Laboratory
12
1. HARDNESS TEST Hardness is a measure of how resistant solid matter is to various kinds of permanent shape change when a force is zpplied. Indentation hardness measures the resistance of a sample to material deformation due to a constant compression load from a sharp object.
Test Method: Vickers, Brinell & Rockwell Hardness Test Test Range : Vickers : 5-10-20-30-50-100Kgf Brinell : 187,5Kgf
Rockwell : 60-100-150Kgf, Preload 10Kgf
2. TENSILE/BEND TEST Tensile testing, also known as tension testing, is a fundamental material science test in which a sample is subjected to a controlled tension until failure. The results from the test are commonly used to select a material for an application and to predict how a material will react under other type of forces.Bend test is used to evaluate both the ductility and soundness of a material. It is often used as a quality control test for Butt-welded joints.Test Method : Tensile, Bend, and Compression testTest Range : 0 to 400 Kilo Newton
Lab Presentation Rev.03 - 01 Dec 2013
Scope of TESTS
13
3. CHARPY IMPACT TEST Charpy Impact Test is a standardized high strain-rate test which determines the amount of energy absorbed by a material during fracture. It is used in many industries for testing materials used in the construction of pressure vessels and bridges and to determine how storms will affect materials used in them.Test temperature: -1960C to Normal room temperatureTest Range : 0 to 300 Joules
4. CHEMICAL ANALYSIS (SPECTROSCOPY) In Optical Emission Spectroscopy technique,
atoms in a sample are excited by energy that comes from a spark formed between sample and electrode. The energy of the spark causes the electrons in the sample to emit light which is converted into a spectral pattern. By measuring the intensity of the peaks in this spectrum, OES analyzers can produce qualitative and quantitative metal analysis of the material composition with uncompromising accuracy.
Material Range : Steels (SS & CS), Copper & Aluminium
Lab Presentation Rev.03 - 01 Dec 2013
Scope of TESTS
14
5. SALT SPRAY TEST The salt spray test (Fog Test) is a standardized test method used to check corrosion resistance of coated samples. It is an accelerated corrosion test used to evaluate the relative corrosion resistance materials exposed to a salt spray or salt fog at an elevated temperatureTest temperature: -1960C to Normal room temperatureTest Range : 0 to 300 Joules
6. METALLOGRAPHIC REPLICA TEST In-situ Replica Metallography is an on-site,
non-destructive technique employed for observing and documenting the microstructural integrity of many engineering metal parts, castings, forgings, welds and brazed joints, equipment, components and steel structures. It is a portable mobile technique that can be taken anywhere-“Take the Laboratory to the Problem and not the Problem to the Laboratory”
Test Temperature : Normal Room Temperature Specification : ASTM E1351
Lab Presentation Rev.03 - 01 Dec 2013
Scope of TESTS
15
METALLURGICAL FAILURE ANALYSIS
Metallurgical failure analysis is the process by which a metallurgist determines the mechanism that has caused a metal component to fail. Typical failure modes involve various types of corrosion and mechanical damage. The end goal of failure analysis is to provide a determination of the root cause and a solution to any underlying problems to prevent future failures. Analysis of a failed part can be done using destructive testing or Non-destructive testing. Destructive testing involves removing a metal component from service and sectioning the component for analysis. Non destructive testing is a test method that allows certain physical properties of metal to be examined without taking the samples completely out of service. NDT is generally used to detect failures in components before the component fails catastrophically.
Lab Presentation Rev.03 - 01 Dec 2013
SERVICING
16
PROGRAMS DURATION
Financial Risk Management & Compliance 5 Days
Feasibility study & business planning 5 Days
Safety In Industrial Plants 5 Days
Accident Investigation & Root Cause Analysis 5 Days
Certified International Professional Trainer(CIPT) 5 Days
Human Resources Management skills 4 Days
Supervisory Management Skills 3Days
Management Skills for Engineers 5 Days
Safety on Electrical Power Distribution Systems 5 Days
Strategic Management 2 Days
Training Programs in DOHA
Lab Presentation Rev.03 - 01 Dec 2013 17
PROGRAMS DURATION
Strategic Management 2 Days
Performance Appraisal Management 3 Days
Crisis Management 2 Days
Professional Mini-MBA 10 Days
Leadership, Creativity & peak Performance 3 Days
Managing change for executives 2 Days
Secretarial Skills 3 Days
Certified Quality Manager (CQM) 2 Days
Business & Tech. Reports Writing 3 Days
Problem solving 3 Days
Certified Team Leader 5 Days
Leadership Communication Skills 5 Days
Developing the next generation of leaders 5 Days
Advanced Finance for Non Finance 5 Days
Lab Presentation Rev.03 - 01 Dec 2013
Training Programs in DOHA
18
Lab Presentation Rev.03 - 01 Dec 2013
Certificate of Accreditation
19