earth colors report. x-ray fluorescence (xrf) is the emission of characteristic...

16
Earth Colors Report

Post on 21-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

Earth Colors Report

Page 2: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited
Page 3: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X-rays from a material that has been excited by bombarding with high-energy X-rays or gamma rays. The phenomenon is widely used for elemental analysis and chemical analysis, particularly in the investigation of metals, glass, ceramics and building materials, and for research in geochemistry, forensic science and archaeology.

Page 4: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

Hexavalent Chromium (Cr6+) (also known as Cr VI) has been commonly used as a coating on a variety of materials, often to act as a corrosion inhibitor. Cr6+ can also be used in pigments, dyes, paints, inks, textiles, plastics and a host of other materials.

Page 5: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

The worrisome byproduct of stainless steel welding is hexavalent chromium, also referred to as Cr(VI). It’s the same stuff from the movie Erin Brockovich. Though as to not frighten one too much, the people of Hinkley, CA were drinking water that had 1,000 times the legal limit of chromium for 20 years before bad things happened.

Page 6: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

Studies have suggested that all people in the welding profession are at higher risk for cancer. There are many unknowns about the increased risks even after all the studies.

Page 7: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

“So lead chromate had not only the offending hexavalent chromium, but also good old lead, a nice, toxic heavy metal.”

Page 8: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

How was GIS used to find poor little Cricket’s body?

Page 9: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

Gamboge + Prussian Blue = Hookers Green

Because of the toxicity of natural gamboge, it is now produced synthetically or cadmium yellow is used as a substitute.

Page 10: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

“The lead in lead white. As a geologist, you probably already know this: With modern milling and cyanide processes, how pure is the lead produced at a silver mine?”

I said, “The lead is removed from the silver, not the other way around…No wait! I get it! I’m used to thinking of the silver as the product and the lead as the byproduct, but either way you’re just trying to separate the two. Prior to the development of the cyanide refinement system a century ago, some of the silver would be left in the lead!”

Page 11: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

How was it determined that the linseed oil could not be from Remington’s era?

What would be the significance of atmospheric C-14 post industrial revolution? Would there be a decrease or increase in the C-14 ratio?

Page 12: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

“ The FBI has a moto: No Crime is committed without duct tape!”

“…Think of all the companies that make it. There are seven or eight different adhesives, for starts. The fiber used to reinforce it varies, as does its weave, and the density of the weave. And even with your basic gray duct tape—it comes in red, and blue, and …well, what have you—the tape material itself varies, and the filler material in it, which, by the way, is also geologic trace evidence, because that filler is made of clay—kaolinite, bentonite—and the coloring pigments include rutile, calcite, aragonite….”

Page 13: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited

Frederic Remington (1861 – 1909)

Page 14: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited
Page 15: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited
Page 16: Earth Colors Report. X-ray fluorescence (XRF) is the emission of characteristic "secondary" (or fluorescent) X- rays from a material that has been excited