easa supplement 05152014 final replacement 052014

This workforce solution was funded (100%) by a grant awarded by the U.S. Department of Labors Employment and Training Administration. The solution was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, express or implied, with respect to such information, including any information on linked sites and including, but not limited to, accuracy of the information or its completeness, timeliness, usefulness, adequacy, continued availability, or ownership. This solution is copyrighted by the institution that created it. Internal use by an organization and/or personal use by an individual for non-commercial purposes is permissible. All other uses require the prior authorization of the copyright owner.

EASA Part-66 Aircraft Maintenance License Supplement

The purpose of this supplement is to provide information on the EASA application process to people in the aircraft maintenance industry. Application Process for Self Improvers

1. Complete independent study of EASA modules. List of EASA Modules can be found on Attachment C. 2. Complete and pass all Module Examinations, passing score is 75%. Refer to Attachment F for a list of

exams. 3. Complete five years civilian aircraft industry experience; time may be reduced based on military

experience. This experience can be gathered while completing the module examinations. Please note that work experience needs to be documented and recognized by EASA to qualify.

4. Petition directly to your member states civil aviation authority for license issue. Description of Attachments Attachment A: Listing of the different EASA license categories. Attachment B: Further explanation on the EASA application process. Attachment C: Shows all modules required for B1 license and the subjects that are covered in each module.

Attachment D: The purpose of this list is to show the EASA topics that are not covered in FAR Title 14 Part 147 Appendix B, C and D (FAA Curriculum Subjects). The applicant will be responsible for studying these subjects before taking the EASA exam on that subject. Attachment E: Compares FAR Title 14 Part 147 Appendix B, C and D to EASA Modules. The purpose of the list is to show where EASA modules match FAA subjects. Please note that the basic knowledge requirements for some subjects are different and an applicant will be responsible for meeting the EASA requirement. Attachment F: Lists the required EASA Exams for obtaining a B1 license. It also offers space to record your scores on each exam.


ATTACHMENT A

EASA License Categories

1. Category A (Certifying Mechanic) allows for the release to service only within the allowed service authorizations:

Minor scheduled line maintenance Simple defect recertification

There are four specialties under Category A license: A1 = Aeroplane Turbine A2 = Aeroplane Piston A3 = Helicopter Turbine A4 = Helicopter Piston

2. Category B1 (Certifying Technician) allows for the release to service with the following authorized line

maintenance: Aircraft structure Powerplants Mechanical and electrical systems Limited avionic testing and replacement

There are four specialties under Category B1 license: B1.1 = Aeroplane Turbine B1.2 = Aeroplane Piston B1.3 = Helicopter Turbine B1.4 = Helicopter Piston

3. Category B2 (Avionics) allows for the issue of certificates of release to service after maintenance of

avionic systems: Instrument systems Automatic pilot systems (rotary and fixed wing) Radio communication systems Navigation systems Radar systems Electrical power generation and distribution to avionic systems

4. Category C permits the licensee to release an aircraft in its entirety by one signature after all base

maintenance work and checks have been completed in accordance with Part 145.


ATTACHMENT B

EASA Part 66 Subpart A Aircraft Maintenance License

66.A.10 Application

a) An application for an aircraft maintenance license or change to such license shall be made on an EASA Form 19 in a manner established by the competent authority and submitted thereto.

b) An application for the change to an aircraft maintenance license shall be made to the competent authority of the Member State that issued the aircraft maintenance license.

c) In addition to the documents required in points 66.A.10(a), 66.A.10(b) and 66.B.105*, as appropriate, the applicant for additional basic categories or subcategories to an aircraft maintenance license shall submit his/her current original aircraft maintenance license to the competent authority together with the EASA Form 19.

d) Where the applicant for change of the basic categories qualifies for such change via the procedure referred to in point 66.B.100* in a Member State other than the Member State which issued the license, the application shall be sent to the competent authority referred to in point 66.1*.

e) Where the applicant for change of the basic categories qualifies for such change via the procedure referred to in point 66.B.105* in a Member State other than the Member State which issued the license, the maintenance organization approved in accordance with Annex II (Part-145) shall send the aircraft maintenance license together with the EASA Form 19 to the competent authority referred to in point 66.1* for stamp and signature of the change or reissue of the license, as appropriate.

f) Each application shall be supported by documentation to demonstrate compliance with the applicable theoretical knowledge, practical training and experience requirements at the time of application.

AMC 66.A.10 Application*

1. Maintenance experience should be written up in a manner that the reader has a reasonable understanding of where, when and what maintenance constitutes the experience. A task-by-task account is not necessary but at the same time a bland statement X years maintenance experience completed is not acceptable. A log book of maintenance experience is desirable and some competent authorities may require such log book to be kept. It is acceptable to cross-refer in the EASA Form 19 to other documents containing information on maintenance.

2. Applicants claiming the maximum reduction in 66.A.30(a) total experience based upon successful completion of 147.A.200 approved basic training should include the Part-147 certificate of recognition for approved basic training.

3. Applicants claiming reduction in 66.A.30(a) total experience based upon successful completion of technical training in an organization or institute recognized by the competent authority as a competent organization or institute should include the relevant certificate of successful completion of training.

*Refer to EASA Certifying Staff-Part-66 publication at the following link: http://easa.europa.eu/rulemaking/docs/technical-publications/partialpart66.pdf

4

PART

-66

APPLICATION FOR INITIAL / AMENDMENT / RENEWAL OF PART-66 AIRCRAFT MAINTENANCE LICENSE (AML) EASA FORM 19

APPLICANTS DETAILS Surname:

First Name(s):

Permanent Address:

Postcode:

Contact Tel. No.: Mobile Tel. No.:

Date of Birth: Place of Birth:

Nationality: E-mail Address:

Address for Correspondence (If different from above)

Postcode:

PART-66 AML DETAILS (if applicable) License No: Date of Issue:

EMPLOYERS DETAILS: Name:

Address:

Maintenance Organization Approval Reference:

Telephone: Fax:

APPLICATION FOR: (Tick relevant boxes) Initial AML: Amendment of AML: Renewal of AML:

Rating A B1 B2 B3 C Aeroplane Turbine

Aeroplane Piston

Helicopter Turbine

Helicopter Piston

Avionics

Piston Engine non-pressurised aeroplanes of MTOM of 2t and below

Large Aircraft

Aircraft other than large aircraft

5

Type Rating Endorsements (if applicable)

Category(s): Type Rating:

I wish to claim the following credits (if applicable): Experience credit for Part-147 training:

Experience credit for equivalent exam certificates:

Experience due to a skilled worker:

Please enclose all relevant certificates. Recommendation (if applicable): It is hereby certified that the applicant has met the relevant maintenance knowledge and experience requirements of Part-66 and it is recommended that the competent authority grants or endorses the Part-66 AML.

Signed: Name:

Position: Date: I wish to apply for initial / amendment / renewal of Part-66 AML as indicated and confirm that the information contained in this form was correct at the time of application. I herewith confirm that:

1. I am not holding any Part-66 AML issued in another Member State, 2. I have not applied for any Part-66 AML in another Member State and 3. I never had a Part-66 AML issued in another Member State which was revoked or suspended in any other Member State.

I also understand that any incorrect information could disqualify me from holding a Part-66 AML.

Signed: Name:

Date:


ATTACHMENT C

EASA Module Listing

Shows all modules required for B1 license and the subjects that are covered in each module.

EASA Module Subjects Covered

Module 1 Mathematics Arithmetic

Algebra Geometry

Module 2 Physics Matter

Mechanics Thermodynamics Optics (Light) Wave Motion and Sound

Module 3 Electrical Fundamentals Electron Theory

Static Electricity & Conduction Electrical Terminology Generation of Electricity DC Sources of Electricity DC Circuits Resistance / Resistor Power Capacitance / Capacitor

Magnetism Inductance / Inductor DC Motor / Generator Theory AC Theory Resistive, Capacitive & Inductive

Circuits Transformers Filters AC Generators AC Motors

Module 4 Electronic Fundamentals Semiconductors

Printed Circuit Boards Servomechanisms

Module 5 Digital Techniques/Electronic Instrument Systems

Electronic Instrument Systems Numbering Systems Data Conversion Data Buses Logic Circuits Basic Computer Structure Microprocessors Integrated Circuits

Multiplexing Fiber Optics Electronic Displays Electrostatic Sensitive Devices Software Management Control Electromagnetic Environment Typical Electronic / Digital Aircraft

Systems

7



Module 6

Materials and Hardware Aircraft Materials - Ferrous Aircraft Materials Non-Ferrous Aircraft Materials Composite &

Non-Metallic Corrosion Fasteners Pipes & Unions

Springs Bearings Transmissions Control Cables Electrical Cables & Connectors

Module 7A

Maintenance Practices Safety Precautions - Aircraft & Workshop

Workshop Practices Tools Avionic General Test Equipment Engineering Drawings, Diagrams &

Standards Fits & Clearances Electrical Wiring Interconnection

System (EWIS) Riveting Pipes & Hoses Springs

Bearings Transmissions Control Cables Material Handling Welding, Brazing, Soldering &

Bonding Aircraft Weight & Balance Aircraft Handling & Storage Disassembly, Inspection, Repair &

Assembly Techniques Abnormal Events Maintenance Procedures

Module 8

Basic Aerodynamics Physics of the Atmosphere Aerodynamics

Theory of Flight Flight Stability & Dynamics

Module 9A

Human Factors General Human Performance & Limitations Social Psychology Factors Affecting Performance Physical Environment

Tasks Communication Human Error Hazards in the Workplace

Module 10

Aviation Legislation Regulatory Framework Certifying Staff Maintenance Approved Maintenance

Organizations Air Operations

Certification of Aircraft, Parts & Appliances

Continuing Airworthiness Applicable National & International

Requirements

8



Module 11A

Turbine Aeroplane Aerodynamics, Structures & Systems

Theory of Flight Airframe Structures General

Concepts Airframe Structures Aeroplanes Air Conditioning & Cabin

Pressurisation (ATA 21) Instruments / Avionic Systems Electrical Power (ATA 24) Equipment & Furnishings (ATA 25) Fire Protection (ATA 26) Flight Controls (ATA 27) Fuel Systems (ATA 28)

Hydraulic Power (ATA 29) Ice & Rain Protection (ATA 30) Landing Gear (ATA 32) Lights (ATA 33) Oxygen (ATA 35) Pneumatic / Vacuum (ATA 36) Water / Waste (ATA 38) On Board Maintenance Systems

(ATA 45) Integrated Modular Avionics (ATA

42) Cabin Systems (ATA 44) Information Systems (ATA 46)

Module 15

Gas Turbine Engine Fundamentals Engine Performance Inlet Compressors Combustion Section Turbine Section Exhaust Bearings & Seals Lubricants & Fuels Lubrication Systems Fuel Systems

Air Systems Starting & Ignition Systems Engine Indication Systems Power Augmentation Systems Turbo-prop Engines Turbo-shaft Engines Auxiliary Power Units (APU) Powerplant Installation Fire Protection Systems Engine Monitoring & Ground

Operation Engine Storage & Preservation

Module 16 Piston Engine Fundamentals

Engine Performance Engine Construction Engine Fuel Systems Starting & Ignition Systems Induction, Exhaust & Cooling

Systems Supercharging / Turbocharging

Lubricants & Fuels Lubrication Systems Engine Indication Systems Powerplant Installation Fire Protection Systems Engine Monitoring & Ground

Operation Engine Storage & Preservation

Module 17 Propeller Fundamentals

Propeller Construction Propeller Pitch Control Propeller Synchronizing

Propeller Ice Protection Propeller Maintenance Propeller Storage & Preservation


EASA Basic Knowledge Requirements The knowledge level indicators are defined on 3 levels as follows: LEVEL 1: A familiarization with the principal elements of the subject. Objectives:

a. The applicant should be familiar with the basic elements of the subject. b. The applicant should be able to give a simple description of the whole subject, using common words

and examples. c. The applicant should be able to use typical terms.

LEVEL 2: A general knowledge of the theoretical and practical aspects of the subject and an ability to apply that knowledge. Objectives:

a. The applicant should be able to understand the theoretical fundamentals of the subject. b. The applicant should be able to give a general description of the subject using, as appropriate, typical

examples. c. The applicant should be able to use mathematical formulae in conjunction with physical laws describing

the subject. d. The applicant should be able to read and understand sketches, drawings and schematics describing the

subject. e. The applicant should be able to apply his knowledge in a practical manner using detailed procedures.

LEVEL 3: A detailed knowledge of the theoretical and practical aspects of the subject and a capacity to combine and apply the separate elements of knowledge in a logical and comprehensive manner. Objectives:

a. The applicant should know the theory of the subject and interrelationships with other subjects. b. The applicant should be able to give a detailed description of the subject using theoretical

fundamentals and specific examples. c. The applicant should understand and be able to use mathematical formulae related to the subject. d. The applicant should be able to read, understand and prepare sketches, simple drawings and

schematics describing the subject. e. The applicant should be able to apply his knowledge in a practical manner using manufacturers

instructions. f. The applicant should be able to interpret results from various sources and measurements and apply

corrective action where appropriate.


ATTACHMENT D

EASA to FAA Gap for B1 Aircraft Maintenance License The purpose of this list is to show the EASA topics that are not covered in FAR Title 14 Part 147 Appendix B, C and D. The applicant will be responsible for studying these subjects before taking the EASA exam on that subject.

EASA Subject Number EASA Subject Title EASA Projects

EASA Knowledge Level

2 Physics

2.4 Optics (Light) Nature of light Speed of light Laws of reflection & refraction: reflection at plane surfaces, reflection

by spherical mirrors, refraction, lenses Fiber optics

2

3 Electrical Fundamentals

3.16 Filters Operation, application & uses of the following filters: low pass, high pass, band pass, band stop

1

4 Electronic Fundamentals

4.1 Semiconductors

4.1.1 Diodes Diode symbols Diode characteristics & properties Diodes in series & parallel Main characteristics & use of silicon controlled rectifiers (thyristors),

light emitting diode, photo conductive diode, varistor, rectifier diodes Functional testing of diodes

2

4.1.2 Transistors Transistor symbols Component description & orientation Transistor characteristics & properties

1

4.1.3 Integrated Circuits Description & operation of logic circuits & linear circuits / operational amplifiers

1

4.2 Printed Circuit Boards Description & use of printed circuit boards 1

4.3 Servomechanisms Understanding of the following terms: Open & closed loop systems, feedback, follow up, analog transducers

Principles of operation & use of the following synchro system components/features: resolvers, differential, control & torque, transformers, inductance & capacitance transmitters

1

11




5 Digital Techniques / Electronic Instrument Systems

5.1 Electronic Instrument Systems

Typical systems arrangements & cockpit layout of electronic instrument systems

2

5.2 Numbering Systems Numbering systems: binary, octal & hexadecimal Demonstration of conversions between the decimal & binary, octal &

hexadecimal systems & vice versa

1

5.3 Data Conversion Analog Data, Digital Data Operation & application of analog to digital, & digital to analog

converters, inputs & outputs, limitations of various types

1

5.4 Data Buses Operation of data buses in aircraft systems, including knowledge of ARINC & other specifications. Aircraft Network / Ethernet.

2

5.5 Logic Circuits Identification of common logic gate symbols, tables & equivalent circuits

Applications used for aircraft systems, schematic diagrams

2

5.6 Basic Computer Structure Computer terminology (including bit, byte, software, hardware, CPU, IC, & various memory devices such as RAM, ROM, PROM)

Computer technology (as applied in aircraft systems)

2

5.10 Fiber Optics Advantages & disadvantages of fiber optic data transmission over electrical wire propagation

Fiber optic data bus Fiber optic related terms Terminations Couplers, control terminals, remote terminals Application of fiber optics in aircraft systems

1

5.11 Electronic Displays Principles of operation of common types of displays used in modern aircraft, including Cathode Ray Tubes, Light Emitting Diodes & Liquid Crystal Display

2

5.12 Electrostatic Sensitive Devices

Special handling of components sensitive to electrostatic discharges Awareness of risks & possible damage, component & personnel anti-

static protection devices

2

5.13 Software Management Control

Awareness of restrictions, airworthiness requirements & possible catastrophic effects of unapproved changes to software programs

2

5.14 Electromagnetic Environment

Influence of the following phenomena on maintenance practices for electronic system: EMS-Electromagnetic Compatibility, EMI-Electromagnetic Interference, HIRF-High Intensity Radiated Field Lightning/Lightning Protection

2

5.15 Typical Electronic/Digital Aircraft Systems

General arrangement of typical electronic/digital aircraft systems & associated BITE (Built In Test Equipment) such as:

2

For B1 & B2 only: ACARS-ARINC Communication & Addressing & Reporting System, EICAS-Engine Indication & Crew Alerting System, FBW-Fly by Wire, FMS-Flight Management System, IRS-Internal Reference System

For B1, B2 & B3: ECAM-Electronic Centralized Aircraft Monitoring, EFIS-Electronic Flight Instrument System, GPS-Global Positioning System, TCAS-Traffic Alert Collision Avoidance System, Integrated Modular Avionics, Cabin Systems, Information Systems

12




7A Maintenance Practices

7.4 Avionic General Test Equipment

Operation, function & use of avionic general test equipment 2

7.19 Abnormal Events Inspections following lightning strikes & HIRF penetration Inspections following abnormal events such as heavy landings & flight

through turbulence

2

9A Human Factors

9.1 General The need to take human factors into account Incidents attributable to human factors/human error "Murphy's" law

2

9.2 Human Performance & Limitations

Vision Hearing Information processing Attention & perception Memory Claustrophobia & physical access

2

9.3 Social Psychology Responsibility: individual & group Motivation & de-motivation Peer pressure Culture issues Team working Management, supervision & leadership

1

9.4 Factors Affecting Performance

Fitness/health Stress: domestic & work related Time pressure & deadlines Workload: overload & underload Sleep & fatigue, shiftwork Alcohol, medication, drug abuse

2

9.5 Physical Environment Noise & fumes Illumination Climate & temperature Motion & vibration Working environment

1

9.6 Tasks Physical work Repetitive tasks Visual inspection Complex systems

1

9.7 Communication Within & between teams Work logging & recording Keeping up to date, currency Dissemination of information

2

9.8 Human Error Error models & theories Types of error in maintenance tasks Implications of errors (i.e. accidents) Avoiding & managing errors

2

9.9 Hazards in the Workplace Recognizing & avoiding hazards Dealing with emergencies

2

13




10 Aviation Legislation

10.1 Regulatory Framework Role of the International Civil Aviation Organization Role of the European Commission Role of EASA Role of the Member States & National Aviation Authorities Regulation (EC) No 216/2008 & its implementing rules Regulations

(EC) 1702/2003 & 2042/2003 Relationship between the various Annexes (Parts) such as Part-21,

Part-M, Part-145, Part-66, Part-147 & EU-OPS

1

10.2 Certifying Staff - Maintenance

Detailed understanding of Part-66 2

10.3 Approved Maintenance Organizations

Detailed understanding of Part-145 & Part-M Subpart F 2

10.4 Air Operations General understanding of EU-OPS Air Operators Certificates Operator's responsibilities, in particular regarding continuing

airworthiness & maintenance Aircraft Maintenance Program MEL/CDL Documents to be carried on board Aircraft placarding (markings)

1

10.5 Certification of Aircraft, Parts & Appliances

10.5a General General understanding of Part-21 & EASA certification specifications CS-23, 25, 27, 29

1

10.5b Documents Certificate of Airworthiness; restricted certificates of airworthiness & permit to fly

Certificate of Registration Noise certificate Weight Schedule Radio Station License & Approval

2

10.6 Continuing Airworthiness Detailed understanding of Part-21 provisions related to continuing airworthiness

Detailed understanding of Part-M

2

10.7 Applicable National & International Requirements for

(if not superseded by EU requirements)

10.7a Maintenance Programs, Maintenance checks & inspections Airworthiness Directives Service Bulletins, manufacturers service information Modifications & repairs Maintenance documentation: maintenance manuals, structural

repair manual, illustrated parts catalog, etc.

2

Only for A to B2 licenses: Master Minimum Equipment Lists, Minimum Equipment List, Dispatch Deviation Lists

14




10.7b Continuing airworthiness Minimum equipment requirements - Test flights

1

Only for B1 & B2 licenses: ETOPS, maintenance & dispatch requirements All Weather Operations, Category 2/3 operations

11A Turbine Airplane Aerodynamics, Structures & Systems

11.7 Equipment & Furnishings (ATA 25)

11.7a Emergency equipment requirements Seats, harnesses & belts

2

11.7b Cabin lay-out Equipment lay-out Cabin Furnishing installation Cabin entertainment equipment Galley installation Cargo handling & retention equipment Airstairs

1

11.17 Water/Waste (ATA 38) Water system lay-out, supply, distribution, servicing & draining Toilet system lay-out, flushing & servicing Corrosion aspects

3

11.18 On Board Maintenance Systems (ATA 45)

Central maintenance computers Data loading system Electronic library system Printing Structure monitoring (damage tolerance monitoring)

2

11.19 Integrated Modular Avionics (ATA 42)

Functions that may be typically integrated in the Integrated Modular Avionic (IMA) modules are, among others:

2

Bleed Management, Air Pressure Control, Air Ventilation & Control, Avionics & Cockpit Ventilation Control, Temperature Control, Air Traffic Communication, Avionics Communication Router, Electrical Load Management, Circuit Breaker Monitoring, Electrical System BITE, Fuel Management, Braking Control, Steering Control, Landing Gear Extension & Retraction, Tire Pressure Indication, Oleo Pressure Indication, Brake Temperature Monitoring, etc.

Core System Network Components

11.20 Cabin Systems (ATA 44) The units & components which furnish a means of entertaining the passengers & providing communication within the aircraft (Cabin Intercommunication Data System) & between the aircraft cabin & ground stations (Cabin Network Service). Includes voice, data, music & video transmissions.

2

The Cabin Intercommunication Data System provides an interface between cockpit/cabin crew & cabin systems. These systems support data exchange of the different related LRUs & they are typically operated via Flight Attendant Panels.

The Cabin Network Service typically consists on a server, typically interfacing with, among others, the following systems:

- Data/Radio Communication, In-Flight Entertainment System. - The Cabin Network Service may host functions such as:

- Access to pre-departure/departure reports, - E-mail/intranet/internet access, - Passenger database,

15




Cabin Core System In-flight Entertainment System External Communication System Cabin Mass Memory System Cabin Monitoring System Miscellaneous Cabin System

11.21 Information Systems (ATA 46)

The units & components which furnish a means of storing, updating & retrieving digital information traditionally provided on paper, microfilm or microfiche. Includes units that are dedicated to the information storage & retrieval function such as the electronic library mass storage & controller. Does not include units or components installed for other uses & shared with other systems, such as flight deck printer or general use display.

2

Typical examples include Air Traffic & Information Management Systems & Network Server Systems

Aircraft General Information System Flight Deck Information System Maintenance Information System Passenger Cabin Information System Miscellaneous Information System


ATTACHMENT E

EASA Comparison with FAA Curriculum Subject Proficiency Levels Compares FAR Title 14 Part 147 Appendix B, C and D to EASA Modules. The purpose of the list is to show where EASA modules match FAA subjects. Please note that the basic knowledge requirements for some subjects are different and an applicant will be responsible for meeting the EASA requirement.

FAA Appendix B - GENERAL SUBJECTS FAA

Knowledge Level

EASA Knowledge

Level EASA Module

A. Basic Electricity Modules 3 & 11A

1. Calculate and measure capacitance and inductance. 1 2 3.9

2. Calculate and measure electrical power. 1 2 3.8

3. Measure voltage, current, resistance and continuity. 3 2 3.6

4. Determine the relationship of voltage, current and resistance in electrical circuits.

3 2 3.6

5. Read and interpret aircraft electrical circuit diagrams, including solid state devices and logic functions.

3 2 3.5

6. Inspect and service batteries. 3 3 11.6

B. Aircraft Drawings Module 7A

7. Use aircraft drawings, symbols and system schematics. 2 2 7.5

8. Draw sketches of repairs and alterations. 3 2 7.5

9. Use blueprint information. 3 2 7.5

10. Use graphs and charts. 3 2 7.5

C. Weight and Balance Module 7A

11. Weigh aircraft. 1 2 7.16

12. Perform complete weight and balance check and record data. 3 2 7.16

D. Fluid Lines and Fittings Module 7A

13. Fabricate and install rigid and flexible fluid lines and fittings. 3 2 7.9

E. Materials and Processes Module 7A

14. Identify and select appropriate non-destructive testing methods. 1 2 7.18

15. Perform dye penetrant, eddy current, ultrasonic and magnetic particle inspections.

2 2 7.18

17


FAA Appendix B - GENERAL SUBJECTS FAA

Knowledge Level

EASA Knowledge

Level EASA Module

16. Perform basic heat-treating processes. 1

17. Identify and select aircraft hardware and materials. 3 2 7.14

18. Inspect and check welds. 3 2 7.15

19. Perform precision measurements. 3 3 7.2

F. Ground Operation and Servicing Module 7A

20. Start, ground operate, move, service and secure aircraft and identify typical ground operation hazards.

2 2 7.17

21. Identify and select fuels. 2 2 7.17

G. Cleaning and Corrosion Control Module 7A

22. Identify and select cleaning materials. 3 3 7.18

23. Inspect, identify, remove and treat aircraft corrosion and perform aircraft cleaning.

3 3 7.18

H. Mathematics Module 1

24. Extract roots and raise numbers to a given power. 3 2 1.2

25. Determine areas and volumes of various geometrical shapes. 3 2 1.1

26. Solve ratio, proportion and percentage problems. 3 2 1.1

27. Perform algebraic operations involving addition, subtraction, multiplication and division of positive and negative numbers.

3 2 1.2

I. Maintenance Forms and Records Module 10

28. Write descriptions of work performed, including aircraft discrepancies and corrective actions using typical aircraft maintenance records.

3

29. Complete required maintenance forms, records and inspection reports. 3

J. Basic Physics Modules 2 & 11A

30. Use and understand the principles of simple machines; sound, fluid, and heat dynamics; basic aerodynamics; aircraft structures; and theory of flight.

2 2 2.1 to 2.5 / 11.1

K. Maintenance Publications Module 10

31. Demonstrate ability to read, comprehend and apply information contained in FAA and manufacturers aircraft maintenance specifications, data sheets, manuals, publications and related Federal Aviation Regulations, Airworthiness Directives and Advisory materials.

3 2 10.2 (EASA Only)

32. Read technical data. 3

L. Mechanic Privileges and Limitations Module 10

33. Understand mechanic privileges within the limitations prescribed by FAR 65.

3 2 10.2 (EASA Only)

18


FAA Appendix C - AIRFRAME SUBJECTS FAA

Knowledge Level

EASA Knowledge

Level EASA Module

I. AIRFRAME STRUCTURES

A. Wood Structures Module 6

1. Service and repair wood structures. 1 2 6.3

2. Identify wood defects. 1 2 6.3

3. Inspect wood structures. 1 2 6.3

B. Aircraft Covering

4. Select and apply fabric and fiberglass covering materials. 1 2 6.3

5. Inspect, test and repair fabric and fiberglass. 1 2 6.3

C. Aircraft Finishes Module 6

6. Apply trim, letters and touchup paint. 1

7. Identify and select aircraft finishing materials. 2 3 6.4

8. Apply finishing materials. 2 3 6.4

9. Inspect finishes and identify defects. 2

D. Sheet Metal and Non-Metallic Structures Modules 6, 7A & 11A

10. Select, install, and remove special fasteners for metallic, bonded and composite structures.

2 2 6.5

11. Inspect bonded structures. 2 2 6.3

12. Inspect, test, and repair fiberglass, plastics, honeycomb, composite and laminated primary and secondary structures.

2 2 6.3

13. Inspect, check, service, and repair windows, doors and interior furnishings.

2 2 11.3

14. Inspect and repair sheet-metal structures. 3 2 7.14

15. Install conventional rivets. 3 2 / 2 7.8 / 11.2

16. Form, lay out and bend sheet-metal. 3 2 / 2 7.14 / 11.2

E. Welding Module 7A

17. Weld magnesium and titanium. 1 2 7.15

18. Solder stainless steel. 1 2 7.15

19. Fabricate tubular structures. 1

20. Solder, braze, gas-weld and arc-weld steel. 2 2 7.15

21. Weld aluminum and stainless steel. 1 2 7.15

F. Assembly and Rigging Module 11A

22. Rig rotary-wing aircraft. 1 2 / 3 11.2 / 11.9

23. Rig fixed-wing aircraft. 2 2 / 3 11.2 / 11.9

24. Check alignment of structures. 2 2 / 3 11.2 / 11.9

25. Assemble aircraft components, including flight control surfaces. 3 3 11.9

26. Balance, rig and inspect movable primary and secondary flight control surfaces.

3 3 11.9

19



Knowledge Level

EASA Knowledge

Level EASA Module

27. Jack aircraft. 3 2 7.17

E. Airframe Inspection Module 7A

28. Perform airframe conformity and airworthiness inspections. 3 2 7.20

II. AIRFRAME SYSTEMS AND COMPONENTS

A. Aircraft Landing Gear Systems Module 11A

29. Inspect, check, service, and repair landing gear, retraction systems, shock struts, brakes, wheels, tires and steering systems.

3 3 11.13

B. Hydraulic and Pneumatic Power Systems Module 11A

30. Repair hydraulic and pneumatic power system components. 2

31. Identify and select hydraulic fluids. 3 3 11.11

32. Inspect, check, service, troubleshoot and repair hydraulic and pneumatic power systems.

3 3 / 3 11.11 / 11.16

C. Cabin Atmosphere Control Systems Module 11A

33. Inspect, check, troubleshoot, service and repair heating, cooling, air-conditioning, pressurization systems and air cycle machines.

1 3 11.4

34. Inspect, check, troubleshoot, service and repair heating, cooling, air-conditioning and pressurization systems.

1 3 11.4

35. Inspect, check, troubleshoot, service and repair oxygen systems. 2 3 11.15

D. Aircraft Instrument Systems Module 11A

36. Inspect, check, service, troubleshoot and repair electronic flight instrument systems and both mechanical and electrical heading, speed, altitude, temperature, pressure and position indicating systems to include the use of built-in test equipment.

1 2 11.5

37. Install instruments and perform a static pressure system leak test. 2

E. Communication and Navigation Systems Module 11A

38. Inspect, check and troubleshoot autopilot servos and approach coupling systems.

1 2 11.5

39. Inspect, check and service aircraft electronic communication and navigation systems, including VHF, passenger address interphones and static discharge devices, aircraft VOR, ILS, LORAN, radar beacon transponders, flight management computers and GPWS.

1 2 11.20

40. Inspect and repair antenna and electronic equipment installations. 2 1 11.5

F. Aircraft Fuel Systems Module 11A

41. Check and service fuel dump systems. 1 3 11.10

42. Perform fuel management, transfer and defueling. 1 3 11.10

43. Inspect, check, and repair pressure fueling systems. 1 3 11.10

44. Repair aircraft fuel system components. 2 3 11.10

45. Inspect and repair fluid quantity indicating systems. 2 3 11.10

46. Troubleshoot, service and repair fluid pressure and temperature warning systems.

2 3 11.10

20



Knowledge Level

EASA Knowledge

Level EASA Module

47. Inspect, check, service, troubleshoot, and repair aircraft fuel systems. 3 3 11.10

G. Aircraft Electrical Systems Module 11A

48. Repair and inspect aircraft electrical system components; crimp and splice wiring to manufacturers specifications; and repair pins and sockets of aircraft connectors.

2 3 11.6

49. Install, check and service airframe electrical wiring, controls, switches, indicators and protective devices.

3 3 11.6

50. Inspect, check, troubleshoot, service and repair alternating and direct current electrical systems.

3 3 11.6

51. Inspect, check and troubleshoot constant speed and integrated speed drive generators.

1 3 11.6

H. Position and Warning Systems Module 11A

52. Inspect, check and service speed and configuration warning systems, electrical brake controls and anti-skid systems.

2 3 11.13

53. Inspect, check, troubleshoot and service landing gear position indicating and warning systems.

3 3 11.13

I. Ice and Rain Control Systems Module 11A

54. Inspect, check, troubleshoot, service and repair airframe ice and rain control systems.

2 3 11.12

J. Fire Protection Systems Module 11A

55. Inspect, check and service smoke and carbon monoxide detection systems.

1 3 11.8

56. Inspect, check, troubleshoot and repair aircraft fire detection and extinguishing systems.

3 3 11.8

21


FAA Appendix D - POWERPLANT SUBJECTS FAA

Knowledge Level

EASA Knowledge

Level EASA Module

I. POWERPLANT THEORY AND MAINTENANCE

A. Reciprocating Engines Module 16

1. Inspect and repair a radial engine. 1 2 16.11

2. Overhaul reciprocating engines. 2 2 16.11

3. Inspect, check, service and repair reciprocating engines and engine installations.

3 2 16.11

4. Install, troubleshoot and remove reciprocating engines. 3 2 16.11

B. Turbine Engines Module 15

5. Overhaul turbine engine. 2 2 15.19

6. Inspect, check, service and repair turbine engines and turbine engine installations.

3 2 15.19

7. Install, troubleshoot and remove turbine engines. 3 2 15.19

C. Engine Inspection

8. Perform powerplant conformity and airworthiness inspections. 3

II. POWERPLANT SYSTEMS AND COMPONENTS

A. Engine Instrument Systems Modules 15 & 16

9. Troubleshoot, service and repair electrical and mechanical fluid rate-of-flow indicating systems.

2 2 / 2 15.14 / 16.10

10. Inspect, check, service, troubleshoot and repair electrical and mechanical engine temperature, pressure and R.P.M. indicating systems.

3 2 / 2 15.14 / 16.10

B. Engine Fire Protection Systems Module 15

11. Inspect, check, service, troubleshoot and repair engine fire detection and extinguishing systems.

3 2 15.20

C. Engine Electrical Systems Module 15 & 16

12. Repair engine electrical system components. 2 2 / 2 15.19 / 16.11

13. Install, check and service engine electrical wiring, controls, switches, indicators and protective devices.

3 2 / 2 15.19 / 16.11

D. Lubrication Systems Modules 15 & 16

14. Identify and select lubricants. 2 2 / 2 15.9 / 16.8

15. Repair engine lubrication system components. 2 2 / 2 15.10 / 16.9

16. Inspect, check, service, troubleshoot and repair engine lubrication systems.

3 2 / 2 15.10 / 16.9

E. Ignition and Starting Systems Modules 15 & 16

17. Overhaul magneto and ignition harness. 2 2 / 2 15.13 / 16.5

18. Inspect, service, troubleshoot and repair reciprocating and turbine engine ignition systems and components.

2 2 / 2 15.13 / 16.5

22



Knowledge Level

EASA Knowledge

Level EASA Module

19. Inspect, service, troubleshoot and repair turbine engine electrical starting systems.

3 2 15.13

20. Inspect, service and troubleshoot turbine engine pneumatic starting systems.

1 2 15.13

F. Fuel Metering Systems Modules 15 & 16

21. Troubleshoot and adjust turbine engine fuel metering systems and electronic engine fuel controls.

1 2 15.11

22. Overhaul carburetor. 2 2 / 2 15.11 / 16.4

23. Repair engine fuel metering system components. 2 2 15.11

24. Inspect, check, service, troubleshoot and repair reciprocating and turbine engine fuel metering systems.

3 2 / 2 15.11 / 16.4

G. Engine Fuel Systems Modules 15 & 16

25. Repair engine fuel system components. 2 2 / 2 15.11 / 16.4

26. Inspect, check, service, troubleshoot and repair engine fuel systems. 3 2 / 2 15.11 / 16.4

H. Induction and Engine Airflow Systems Modules 15 & 16

27. Inspect, check, troubleshoot, service and repair engine ice and rain control systems.

2 2 15.3

28. Inspect, check, troubleshoot, service and repair heat exchangers, supercharger and turbine engine airflow and temperature control systems.

1 2 / 2 15.12 / 16.7

29. Inspect, check, service and repair carburetor air intake and induction manifolds.

3 2 / 2 15.3 / 16.6

I. Engine Cooling Systems Modules 15 & 16

30. Repair engine cooling system components. 2 2 / 2 15.7 / 16.6

31. Inspect, check, troubleshoot, service and repair engine cooling systems. 3 2 / 2 15.7 / 16.6

J. Engine Exhaust and Reverser Systems Modules 15 & 16

32. Repair engine exhaust system components. 2 2 / 2 15.7 / 16.6

33. Inspect, check, troubleshoot, service and repair engine exhaust systems. 3 2 / 2 15.7 / 16.6

34. Troubleshoot and repair engine thrust reverser systems and related components.

1 2 / 2 15.7 / 16.6

K. Propellers Module 17A

35. Inspect, check, service and repair propeller synchronizing and ice control systems.

1 2 17.5

36. Identify and select propeller lubricants. 2

37. Balance propellers. 1 3 17.6

38. Repair propeller control system components. 2

39. Inspect, check, service and repair fixed-pitch, constant-speed, and feathering propellers, and propeller governing systems.

3 2 17.3

40. Install, troubleshoot and remove propellers. 3 2 17.2

41. Repair aluminum alloy propeller blades. 3 2 17.2

23



Knowledge Level

EASA Knowledge

Level EASA Module

L. Unducted Fans

42. Inspect and troubleshoot unducted fan systems and components. 1

M. Auxiliary Power Units Module 15

43. Inspect, check, service and troubleshoot turbine-driven auxiliary power units.

1 2 15.18

24


ATTACHMENT F

Exam Verification Log for B1

EASA Exam Log Exam Type Exam Date Exam Score

Module 1 Mathematics 32 Multiple Choice Questions

Module 2 Physics 52 Multiple Choice Questions

Module 3 Electrical Fundamentals 52 Multiple Choice Questions

Module 4 Electronic Fundamentals 20 Multiple Choice Questions

Module 5 Digital Techniques/Electronic Instrument Systems 40 Multiple Choice Questions

Module 6 Materials and Hardware 72 Multiple Choice Questions

Module 7 Maintenance Practices 80 Multiple Choice Questions & 2

Essay Questions

Module 8 Basic Aerodynamics 20 Multiple Choice Questions

Module 9A Human Factors 20 Multiple Choice Questions & 1

Essay Question

Module 10

Aviation Legislation 40 Multiple Choice Questions & 1 Essay Question

Module 11A

Turbine Aeroplane Aerodynamics, Structures & Systems

140 Multiple Choice Questions

Module 15

Gas Turbine Engine 92 Multiple Choice Questions

Module 16

Piston Engine 72 Multiple Choice Questions

Module 17

Propeller 32 Multiple Choice Questions

NOTE: A passing score is 75% on each exam.


Information on Exams

Testing Location

CAA International Teaching Academy Building 93, University of Central Florida (UCF), 4000 Central Florida Blvd, Orlando, FL 32816-3117 T: +1 407 823 2931 http://www.caainternational.com/our-services/aviation-examinations/take-an-exam/part-66/florida

Reference Materials

Aircraft Technical Book Company, LLC PO Box 270 Tabernash, CO 80478 970-726-5111 http://www.actechbooks.com/subcategories/350/ Total Training Support Atterbury Lakes Fairbourne Drive, Atterbury, Milton Keynes, MK10 9RG United Kingdom +44 (0)773 4172223 http://totaltrainingsupport.com/index.php?option=com_virtuemart&view=category&virtuemart_category_id=0&categorylayout=0&Itemid=220

EASA Supplement 05152014 Final.docx by Air Washington is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

easa supplement 05152014 final replacement 052014

Documents

list of easa modules

easa topics

easa requirement

easa application process

required easa exams

attachment b

attachment d

attachment c