easy lunch tote

8/14/2019 Easy Lunch Tote

1/8

...free pattern


2/8

Front Panels Side Gusset Handles

InteriorA

W 55 cm x L 25 cm

C

W 55 cm x L 20 cm

E

W 8 cm x L 72 cm

ExteriorB

W 55 cm x L 25 cm

D

W 55 cm x L 20 cm

Woven Interlining W 55 cm x L 25 cm W 55 cm x L 20 cm

Vilene Light Weight

FleeceW 55 cm x L 25 cm W 55 cm x L 20 cm

Fabrics & Interlinings Required

Pattern1. Preparation

1.1 Cut out the fabric.

1 2 Place the interior front panels (A) with the wrong side facing up Fold the top 1cm

Note: The fabrics I used is non-water proof. You can however choose to use water proof fabrics (such as oil cloth).
http://cottonandcloud.com/item.php?item_id=19&category_id=11http://cottonandcloud.com/item.php?item_id=19&category_id=11http://cottonandcloud.com/item.php?item_id=19&category_id=11http://cottonandcloud.com/item.php?item_id=19&category_id=11http://cottonandcloud.com/item.php?item_id=14&category_id=11http://cottonandcloud.com/item.php?item_id=14&category_id=11


3/8

1.4 For the side gusset piece, place the wrong side up, fold both ends 1cm inwards and

press. Place the light weight fleece (for interior side gusset C) or woven interlining (for

exterior side gusset D) with the glue facing down onto the wrong side of the fabric(fig. 5). Turn the whole piece the right side facing up. Press to fuse the interlining.

1.5 Make handles (E)by pressing in half lengthwise. Open it out and press the raw edges

into the centre (fig 6). Top stitch along both edges with 2.5mm seam allowance. Cut

the handles in two so that you have 2 x 36 cm pieces.

Fig. 4 Fig. 5 Fig. 6

Fig. 7 All the fabric pieces are prepared, ready for

sewing.

A: Interior front panels with light weight fleece

B: Exterior front panels with woven interlining

AB

C

A

E


4/8

2.2 Repeat the same process for the exterior B and the gusset D.

2.3 For the best result, turn the exterior piece right side out and press. Fold neatly

especially around the corners. Note that the top raw edges are folded inwards (fig.

11).

2.4 Unfold the top edges. Pin the handles upside down with both ends matching the raw

edges of the exterior piece. Baste the handles onto the exterior piece 4 cm from the

edge (fig. 12).

2.5 Turn the exterior piece wrong side out. Attach the exterior and interior pieces with

id f i t th b tt t b tt M t h th b tt t d i t

Fig. 11 Fig. 12

4 cm


5/8

Enjoy!


7/8

Place baghandle here

Place baghandle here


Cut:2 x Interior (A)2 x Exterior (B)

2 x Woven interlinings

Front Panels (A & B)

Note

1 cm seam allowance is

included.

Make sure the print setting

is marked as DO NOT

SCALE.


8/8

Place

onfold

Cut:1 x Interior (C)1 x Exterior (D)

1 x Woven interlining

Side Gussets (C & D)

Note

1 cm seam allowance is included.

Make sure the print setting is marked as DO NOT SCALE.


easy lunch tote

Documents