easypanel - qscomp.cz · data modul ag - landsberger str. 322 - 80687 münchen ... 13.7 storage...

– tentative –

Specif ication for BATRON EASY PA NEL

FEB. 2003 – Version 1.2 Product Marketing TFT

EasyPanel

TENTATIVE

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de

Revision History

Rev ision Date Prepared Checked Checked Approv ed Summary

1.0 Dec.11,2002 A. Kuerz A .Kuerz 1st issue

1.1 Feb.7,2003 C .Karow

1.2 May 23,2003 A. Kuerz added power consumption


Table of contents

1.General __________________________________________________________________5

2.Product Name and Model Number______________________________________________5

2.1 Product Name: easyPanel_________________________________________________5

2.2 Model Name: EP150XG1-21F ______________________________________________5

3.Overview _________________________________________________________________5

4.Configuration _____________________________________________________________5

5.Mechanical Specifications____________________________________________________6

6 .Optical Specifications_______________________________________________________7

7. Electrical Specififcation ____________________________________________________12

8.CCFL-Specification ________________________________________________________13

8.2 Lamp Assembly set (for re-Placement)________________________________________13

9.AppearanceSpecifications___________________________________________________13

9.1 Zone __________________________________________________________________13

9.2 Bright spots ____________________________________________________________13

9.3 Test condition___________________________________________________________14

9.4 Specifications___________________________________________________________14

10.Environmental Specifications _______________________________________________16

10.1 Packaging Information ___________________________________________________17

11.Indication_______________________________________________________________17

12.Warranty _______________________________________________________________18

13.Precautions _____________________________________________________________18

13.1 Fail safe design_________________________________________________________18

13.2 Handling of LCD panel ___________________________________________________18

13.3 Handling of LCD Module__________________________________________________19

13.4 Precautions for operating the LCD module____________________________________20

13.5 Always input the control signals at the correct timing.___________________________20

13.6 Precautions on designing module mounting __________________________________20

13.7 Storage method ________________________________________________________21

13.8 Others________________________________________________________________21


14.Precautions for use _______________________________________________________22

15.Miscellaneous ___________________________________________________________22

16.Mechanical Drawings _____________________________________________________23

17.Interface Specifications____________________________________________________24

17.1 Introduction ___________________________________________________________24

17.2 Technical Information Summary____________________________________________24

17.3 Connectors____________________________________________________________25

17.3.1. OSD keypad connector X5 ____________________________________________25

17.3.2 DC-Powersupply connector___________________________________________25

18.On Screen Display________________________________________________________25

18.1 OSD-Keypad “OSD-Panel” ________________________________________________28

19.Technical Specification____________________________________________________28

20.Supported Video Modes ___________________________________________________29

21.Serialnumber____________________________________________________________30


1.General This specification is applied to the 15.0” easyPanel with XGA Resolution driven with an analog

card. This specification is subject to change. Data Modul is not responsible for changes of the

components of the easyPanel.

This specification refers to the specifications of the manufacturers of the parts.

2.Product Name and Model Number

2.1 Product Name: easyPanel

2.2 Model Name: EP150XG1-21F

3.Overview This easyPanel has an integrated TFT active matrix type liquid crystal panel with 1024x768

pixels, and diagonal size of 38cm (15.0-inch). This module is driven by an analog receiver

card for connection to a PC Graphic card. The Display has a color depth of 262,144 colors.

The EasyPanel is not a complete Monitor. It is a component. Data Modul AG is not

responsible for CE or EMI classifications.

The Power supply of this module is single 12 V (10,8-13,2V). The Input Voltage must be

stabilized and filtered. Powerconsumption 2,1W (Moire´ Picture)

4.Configuration This module consists of a LCD panel with mounted driving board and Inverter. The

components are tested and tuned to work together perfectly. Customer should not open the

housing of the easyPanel. The easyPanel is using an active matrix Fujitsu TFT with MVA

(Multi-domain Vertical Alignment) liquid crystal technology. The LCD driving board is in the

housing of the module.

If required Data Modul AG will send the full specifications of the included components.


5.Mechanical Specifications

Table 5.1. Mechanical Specif ications

Item Specifications Unit Remark

Dimensions 347.3x263.5x 41.1(TY P.) mm Edge type backlight is used.

Display Resolution (1024x3) x768 - (02.6 CCFLx4)

Display Dot Area 304.1x228.1 mm -

Dot Pitch (0.099x3) x0.297 mm at page 30 and 31.

Aspect Ratio 4:3 - -

Weight 2500 max g -

FG-SG Short circuit - -


6.Optical Specifications

Table 6-1. Optical Specif ications Ta=25°C

Specifications Remark Item Symbol Condition

MIN. TYP. MAX Unit

Note

Horizontal θL,R CR>=10 θu,D=0° 80 - - deg (1)(2) Visual Angle Vertical θu,D θL,R=O° 80 - - deg (3)(5)(6)

Contrast Ratio CR θL,R,U,D=O° 210 400 - - White/ Black

(1)(2)(3)(5)

θL,R, Ta=25°C - 15 30 ms (1) Response Time(ON) (B to W) ton u,D=O° Ta=O°C - 50 100 ms (4) (5)

θL,R, Ta=25°C - 10 25 ms Response Time(OFF) (W ->B) to B)

t off -Ta - 0°C - 50 100 ms

Brightness I 200 250 - cd/m2 White (1)(5)

Brightness Unif ormity Al θL,R,u,D=0°

Vcc=5V, IL=7mA 80 - - oha1 (3)(5)(6)

Chromaticity W X 0.283 0.313 0.343 - (1)

Y

(at maximum brightness) 0.299 0.329 -0.359 - (5)

R Red (0.646, 0.350) TYP.

G (x, y ) Green (0.310, 0.593) TYP.

B White (0.153, 0.152) TYP.

LCD Panel Type TFT Color

Display Mode Normally Black VA

Wide Viewing Angle Technology MVA

Optimum Viewing Angle (sy mmetry ) (6)

Display Color 262,144 (6-bit Color)

Color of non-display area Black

Surface Treatment Anti-glare (Haze v alue:25%, 2H)

(*1) Value at 15-20 minutes after lighting on.

(Note) CS-1000 (MINOLTA Co., Ltd.) , BM-5A(Topcon) or equivalent luminance colorimeter should

be used for the measurement. Field=2°, L=500mm

The specified value of viewing angle, contrast, brightness, brightness uniformity and chromaticity

are under the dark room condition (1 lux or less).


Fig.6.2 γ-Curve (Reference Value)


Fig. 6.3 Definition of Viewing Angle

Fig. 6-3 Definition of Viewing Angle

Fig. 6.4 Voltage-Brightness Characteristics


Note 6) Definition of Optimum Viewing Angle

Fig. 6.8 Measurement Points

Fig. 6.7 Definition of Viewing Angle


7. Electrical Specififcation 12V Power connector: Hirose RPC2-12R8-3P

mating type: Hirose RPC2-12P-3S

easyPanel includes Powerconnectors

Connection Diagramm

Pin 1 = NC

Pin 2 = +12V

Pin 3 = GND

Input voltage range: 10,8V- 13,2V, stabilized and filtered

Typ. current consumtion: ca. 2,1 A

Signal connector: 15pol. D-Sub standard analog VGA-Connector


8.CCFL-Specification

Supplier : SANKEN ELECTRIC CO., LTD __________________ Part No. KFN8319F315296Z

8.1 Life The life of the backlight is a minimum of 50,000 hours at the following conditions.

(1) Working conditions

Ambient temperature 25±5°C

Tube current(IL) (7mA or less)

(2) De finition of life

Brightness becomes 50% or below 50% of the minimum brightness value shown

in Table 9-1.

The lamp can not be lit by the breakdown voltage of

1500Vrms

Lamp is flashing.

8.2 Lamp Assembly set (for re-Placement)

Lamp Assembly set (with charge) is prepared for maintenance. This set consi sts of an

upper lamp assembly and a lower lamp assembly.

Type number : FLCL-16S (for upper and lower)

9.AppearanceSpecifications

9.1 Zone

o Inside display dot area (304.1x 228.1mm)

o Display dot area means active area.

o One pixel consists of 3 dots (red, green and blue).

o Foreign particle and scratch unharmful to display image, such as the foreign

particle under polarizer fi lm but outside of the display area and scratch an

metal bezel, backlight module or polarizer fi lm out of the display area, etc.,

are not counted.

9.2 Bright spots

(1) Bright spots by the defect of TFT.

o Visible under bias of 2% ND filter ………………………. High bright spot R • G

o Visible under 5% but invisible under 2% ND filter…. Low bright spot R • G • B

o Invisible under bias of 5% ND filter ………………………………….Not counted


(2) Bright spots by the light passing through tears, brea ks, etc in color

fi lter

o Exceed size of a half dot .............................………………..... High bright spot

o A half dot or less .........................................………………………....... Not counted

(3) Bright spots by the light passing through tears, Breaks, etc in chromium

mask

o Exceed 50µm ................................................………………..... High bright spot

o 50µm or less ........................................................…………………….... Not counted

9.3 Test condition

o Inspector must ob serve the LCD screen from the normal direction

under the illumination by a single 20W fluorescent lamp. The

distance between the LCD screen and the inspector should be a

height of 50cm above the worktable.

o The vertical i lluminance is 300 to 600lux (reference value)

o Bright spot should be counted under entire black screen

o Dark spot should be counted under entire white screen. Frame

frequency should be 60Hz.

9.4 Specifications

Table 9.4.1 Shows the appearance standard.

(Note l) Please do not mistake a single bright spot for a bright spot connection due to

Cs(supplemental capacitance) line at the center of each dot.

(Note2) If a pixel is dark partially, it connects into the number of dark spots in

accordance with following rule.

(a) S 1/3: Not count. Only one of 4 dark connection is

allowed.

(b) 1/3 S 2/3 : Considered as 0.5 dot.

(c) 2/3 S: Considered as 1 dot.

(S=Dark spot size/dot size)


Table 9.4.1 Appearance specif ications

No. Item Judgement method and standard

1 Bright spot (high and Low) 3 dots (Note 1 )

2Bright spot connection

(high and low) 1 pair (Note 1)

(2 dot connection in horizontal only )

3 Total of bright spot 3 dots

4 Dark spot 6 dots (Note 2)

5 Dark spot connection 3 pairs (Note 2)

(2 dot connection in horizontal only )

6 Total of dark spot 6 dots (Note 2)

7Total of dot def ect (bright and dark) 6 dots

15mm 8

Distance of bright spot

High _ high~ others 5mm

9 Distance of dark spot 5mm

W 0.03 - Ignore

L 6 Ignore 6<L 12 30.03<W 0.05 12<L 0

L 0.6 Ignore

0.6<L 5 20.05<W 0.15 5<L 0

WxL 0.4 1

0.4<WxL 0

10 Scratch an polarizer, line shape

0.15<W 0.3

- 0

D 0.2 Ignore 0.2<D 0.4 411 Dent and polarizer, dot shape

0.4<D 0

D 0.4 412 Bubble in polarizer

0.4<D 0

D 0.5 413

Black white spot (Foreign circular matter) 0.5<D 0

3

2S<1/3

0

1/3 S<2/3 Dot def ect +0.5

14 Light leakage by foreign Articles

2/3 S Dot def ect +1

W 0.03 - Ignore L 6 Ignore

6<L 12 30.03<W 0.05

12<L 0

L 0.6 Ignore 0.6<L 5 20.05<W 0.1

5<L 0

15 Lines black / white line

0.1<W (W+L)/2=D Conf orm to No.13

D: Average diameter [mm], W: Width [mm], L: Length [mm], S=(bright spot size)/(dot size)


10.Environmental Specifications

Table 10.1 Env ironmental Specif ications

Item Condition Remark

Operation 0-50°C

Temperature Storage -20-60°C

Temperature on surf ace of LCD panel (display area)

Operation 20-85%RH Humidity

Storage 5-85%RH

Maximum wet-bulb temperature should not exceed 29°C. No condensation.

Vibration Non - operation 10-500Hz, 1 cy cle/20minute,2G, 1.5mm max, 2hour each X, Y and Z directions

Shock Non - operation 50G, 6ms, ltime each ±X, ±Y and ±Z directions.

For single module without package.


10.1 Packaging Information

Each module is in a Anti-Electric Bag. 5 modules a in one box.

11.Indication

This Product has the following indications.

(1) Product name: easyPanel

(2) Model number: EP150XG1-21

(3) Product drawing number:

(4) Date code: 3/B/7

(5) Country of origin: assembled in Germany, components see manufacturer

easyPanel contains CCFL-Lamps. Please follow local ordinances or regulations for its disposal.

When changing CCFL please follow operating specification and ask for Display specification.


12.Warranty The warranty period is one year after manufacturing. Products which fall during this period are

repaired or replaced without charge, unless the failure is caused by user.

13.Precautions Adhere to the following precautions to properly use this LCD module.

13.1 Fail safe design

LCD module has an inherent chance of failure. Customers must protect against injury,

damage or loss from such failures by incorporating safety design measures into your

facility and equipment such as redundancy, fire protection, and prevention of over-current

levels and other abnormal operating conditions.

13.2 Handling of LCD panel

o Do not apply any strong mechanical shock to the LCD panel.

o Since the LCD panel is made of glass, exce ssive shock may damage the panel or

cause a malfunction.

o Do not press hard on the LCD panel surface

o In the LCD panel, the gap between two glass plates is kept preci sely and

uniformly to maintain display's characteristics and reliability. If this panel is

pressed hard, the following troubles occurs.

(a) Ununiformity of color

(b) Orientation of l iquid crystal becomes disordered

Problem (a) returns to normal after a while. Problem (b) return s to normal if power is

shut off once then turned an again.

However the se operations should be avoided to insure reliabil ity.

o Do not scratch the polarizer film an the LCD panel surface.

o Do not press or rub the display surface with a hard tool, pincet, etc.

o For handling, use cotton or conductive gloves so that the display surface is not

stained.

o For If the display surface is stained by dust or dirt, clean it as follows with a soft

cloth (deer skin, etc.)

o [Dust] Wipe off with a soft cloth. (do not rub.)

o [Dirt ] Wipe off lightly with a soft cloth after soaking in the clear water and

squeezing hard out of water drops. Only if the dirt is hardly wiped off, use

isopropyl alcohol or ethanol.

o Be careful not to splash the water or the solvent and water penetrated between

the polarizer and the LCD panel.

o Do not use solvents such as ketone (acetone, etc.) and aromatics (xylene,

toluene, etc.)


o If saliva or water drops a re left for long time, it may deform partial deformation or

discolored. Wipe off immediately in the same way as for dirt.

o Do not allow oil to adhere to the module, since the cleaning of oil is difficult.

o Do not place or contact objects an the display surface for a long period of time.

That's because this may make some parts of the LCD module distorted and the

display quality may decline.

13.3 Handling of LCD Module

o Do not pull the Gold-cathode tube Gable strongly.

If the Gable is pulled with the loaf of 2kg or more, the Gable may be damaged or

reliability may decrease.

o Assemble the module into user's system in a dust free env ironment.

If conductiv e f oreign matter adheres to the module, f ailures may occur.

o Take anti -static measures for assembling the module.

Since the LCD module contains CMOS-ICs, the following considerations are

necessary.

o For assembling the module, operator should be grounded and wear cotton

or conduc tiv e gloves.

o Floor of work area and work table to assemble the LCD module should be

cov ered with electrostatic shielding in order to discharge static electricity

v ia an earth wire.

o If necessary, ground opera tion tools (soldering iron, radio pliers, pincet,

etc.).

o Do not take the module out of the conduc tiv e bag until the time when the

module is assembled.

o Assemble the module under low humidi ty (50%RH or less).

o Do not pull the connecting Gable an the rear face of the LCD module

strongly.

o Do not disassemble or remodel the LCD module.

If this LCD module is disassembled or remodeled, it may have some trouble, or the

display quality and reliability may not be assured.


13.4 Precautions for operating the LCD module

Adhere to the specified power supply sequence.

If not followed, the CMOS-IC may cause a latch-up, or the DC voltage may be applied

the liquid crystal, and a failure or serious deterioration in display quality may occur.

Do not operate the LCD module when condensation is present.

If the LCD module is operated when condensation is an the terminals of the LCD panel,

the terminals cause electrochemical reaction, and may reach disconnection.

Condensation easily occurs e specially when the module is moved from a Gold

environment to a warm environment.

Trouble that occurs when the LCD module is used at not recommended temperature.

o Operation at high temperature(>50°C) :Display colors shift to blue.

o Storage at high temperature (>60°C) :The polarizer film deteriorates and contrast

decrease s.

o Operation at low temperature(<0°C) :The response speed decrease s

considerably.

o Storage at low temperature (<-20°C) :The liquid crystal may solidify and become

damaged.

13.5 Always input the control signals at the correct timing.

If control signals (DCLK, or ENAB) are not input, or if the timing is out of the specified

timing, DC voltage may be applied to the liquid crystal and, as a result, cause image

sticking or deterioration of contrast.

13.6 Precautions on designing module mounting

Do not press the displa y surface and bottom face of the LCD module.

Display quality or reliabil ity may be deteriorated if the installation of the LCD module is

inappropriate and, as a result, exce ssive pressu re is applied to the surface of LCD

screen. Brightness uniformity or the reliability of CCFL may decrease if the pressure is

applied to the backlight module.


Consider the module mounting design, so that twisting and bending do not occur to the LCD module.

Excessive twi sting and bending may damage display quality and reliabil ity.

The power cable length between the LCD module and inv erter should not be extended.

Otherwise the backlight may not light or fl ickering may occur.

Do not make the power cable of the backlight clung to a metal pla te, etc.

Backlight frequency current for backlight driving may leak to the metal and desired

brightness may not be assured.

When Mounting LCD module with M4 screw (x4) should be screw up under 5.75kgf torque.

13.7 Storage method

Do not store the LCD module in an atmosphere of organic solv ent or corrosiv e gas.

In an organic solvent atmosphere, the polarizer fi lm discolors and display quality

deteriorates.

In a corrosive ga s environment, various problems may occur.

Store the LCD module in a Fuj itsu package.

At storing, Fujitsu packages can be stacked up to 4 boxes.

The LCD module is in an anti-static bag. Keep the module in that status.

It is recommended that the storage env ironment should be humidi ty controlled, cool

and dark.

Recommended storage environment

o Place Dark (avoid direct sunlight)

o Temperature: 10-35°C

o • Humidity: 50-60%RH

(Note) If the module is left in an environment of 60°C or more for a long period of time, optical

characteristics may deteriorate.

13.8 Others

If the LCD panel is damaged, do not inhale or allow the liquid crys tal to enter the

mouth.

If the liquid crystal contacts the body or cloths, wa sh it off with soap immediately. Follow

precautions for regular electronic components.

Solder flux on the printed circui t board is harmless to the quality and reliability of

LCD module.

Fujitsu is practicing non-wash technology on module assembly process.


14.Precautions for use

This Product is designed, developed and manufactured as contemplated for general use,

including without limitation, general office use, personal use, household use, and ordinary

industrial use, but is not designed, developed and manufactured as contemplated for use

accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead

directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety

Required Use"), including without limitation, nuclear reaction control in nuclear facility, aircraft

flight control, air traffic control, mass transport control, medical life support system, missile

launch control in weapon system. If customer's product possibly falls under the category of High

Safety Required Use, please consult with our sales representatives in charge before such use.

In addition, Fujitsu shall not be liable against the Customer and/or any third party for any claims

or damages arising in connection with the High Safety Required Use of the Product without

permission.

15.Miscellaneous

Specifications of the TFT-LCD panel and other components used in the LCD module are

subject to change. Both parties shall discuss together before change.

If any doubt is raised in the content of the specifications, both parties shall discuss and make

best effort for the agreement.


16.Mechanical Drawings


17.Interface Specifications

17.1 Introduction

The CRTtoLCD-1-LC is a highly integrated TFT panel interface controller, which allows an

easy adaptation of standard analog video sources to a digital TFT panel. The CRTtoLCD-

1-LC needs only one single 12V power supply and incorporates all needed functionality,

including optional 4 or 8wire touch controller for USB or PS/2 interfaces, to build up a full

featured TFT monitor. The card generates the necessary power sequencing for the flat

screen. The highly flexible architecture of the CRTtoLCD-1-LC panel interface allows

adapting nearly any available TFT panel. Therefore a variety of panel adapters and

programming are available on request.

17.2 Technical Information Summary

Analog-input Features

- Fully integrated 135MHz 8-bit triple-ADC, PLL and pre-amplifier

- On-chip programmable OSD engine

- Integrated PLLs

- 10-bit programmable gamma correction

Integrated Analog Front End

- Integrated 8-bit triple ADC

- Up to 135MHz sampling rates

- No additional components needed

- All color depths up to 24-bits/pixel are supported

High-Quality Adv anced Scaling

- Fully programmable zoom

- Independent horizontal / vertical zoom

- Enhanced and adaptive scaling algorithm for optimal image quality

- Recovery Mode / Native Mode

Input Forma t

- Analog RGB VGA up to SVGA

- optional XGA and SXGA@70Hz

- 15 Pin standard VGA connector

Operating Modes

- Bypass mode with no filtering

- Multiple zoom modes: - with fi ltering, - with adaptive (ACE) fi ltering

Integrated On-Screen Displa y

- On-chip character RAM and ROM for better customization

- Optional external OSD supported for greater flexibility

- Supports both landscape and portrait fonts

- Many other font capabilities including: blinking, overlay and transparency


- Input format detection

Display Interface Features

- Control signal generation for backlight inverter

- backlight dimming support

- voltage generation and power sequence control for panel

- Flat screens can be used with either 3.3V or 5V.

- FLEX32 and FLEX50 ( Digital RGB ) panel interface up to 36-Bit

- JILI40 ( LVDS ) panel interface ( one and double port up to 24 Bit )

Operating Features

- 4 button user interface

- On Screen Display ( OSD ) control for all features

- Full multi sync capable

- VESA DPMS and DDC2B support

- Single voltage supply ( +5V DC )

- Dynamic Power Management for minimal power consumption via DPMS

- No software drivers needed!

17.3 Connectors

- RGB analog input X9

- OSD keypad connector X5

- DC Powe r supply CM

17.3.1. OSD keypad connector X5

17.3.2 DC-Powersupply connector

18.On Screen Display

With the OSD (On Screen Display) you can modify the setting s and control the special

feature s of the CRTtoLCD-1 -LC. The OSD u se s a number of menus fo r ma king changes

and turning the special features on o r off. The configuration can be done via the OSD-

keypad (OSD-Panel-Kit)


To start the OSD pre ss the "OSD" button on the keypad, after switching the power supply

on. If a valid flat panel configuration is installed the OSD Main Menu will be displayed.

To select an item, simply use "OSD" to move the cursor to the field you want. Then use

"Confirm" to select the field. Use "Up" or " Down" to select a value for that field. The "Save"

command in the OSD Main Menu save the values currently displayed in all the menus.

To display a sub menu, simply use "OSD" to move the curso r to the field you want. Then

use "Confirm" to select the field The Main Menu

You can make the following selections on the Main Menu itself. Use the

sub menu s for othe r selections.


OSD Main Menu Feature Button Description

RGBMenu Enter Submenu with "Conf irm". Adjust color lev el submenu Geometr Menu Enter Submennu with "Conf irm". Adjust image submenu ContrastMenu Enter Submenu with "Conf irm". __Specia lMenu Enter Submenu with "Conf irm". Specia l f eatures submenu

Sav e Press "Conf irm" Sav e all adjustments in NV-RAM. Rev ert Press "Conf irm" Inv alidates all ad justments.

PowerDown Press "Conf irm" Switch of f panel and backl ight. Wake up with "Power On/Of f ' key .

Exit Press "Conf irm" Turn off the OSD menu.

RGBMenu Feature Button Description

Brightness Use"Up" and "Down" Adjust red / green / blue color lev el, Range 0 to 255 BrightRed Use"Up" and "Down" Adjust red color lev el, Range 0 to 255

BrightGreen Use"Up" and "Down" Adjust green color lev el, Range 0 to 255 BrightBlue Use"Up" and "Down" Adjust blue color lev el, Range 0 to 255 ColorTem Use"Up" and "Down" Range: 0 to 255 Sharpness Use"Up" and "Down" Adjust sharpness, Range : 0 to 1

MainMenu Press "Conf irm" Go back to OSD-Main Menu

GeometryMenu Feature Button Description

AutoAdjust Press "Conf irm" Adjust image automatica lly H position Use "Up" and "Down" Mov e the image position horizontal ly , Range 0 255 Vposition Use "Up" and "Down" Mov e the image position v ertically , Range 0 255

Htotal Use "Up" and "Down" Range 0 255 AutoPhase Press "Conf irm" Range 0 255

Delay Use "Up" and "Down_" Range : 0 255 MainMenu Press "Conf irm" Go back to OSD-Manu

ContrastMenu Feature Button Description

AutoBalance Press "Conf irm" Adjust balance and contrast automatically Contrast Press "Conf irm" Adjust red/ green/blue contrast automatically ContRed Use "Up" and "Down" Adjust red contrast, Range 0 to 255

ContGreen Use "Up" and "Down" Adjust green contrast, Range 0 to 255 ContBlue Use "Up" and "Down" Adjust blue contrast, Range 0 to 255 Balance Press "Conf irm" Adjust red/ green/blue balance automatically

BalanRed Use "Up" and "Down" Adjust red balance, Range 0 to 255 BalanGreen Use "Up" and "Down" Adjust green balance, Range 0 to 255 BalanBlue Use "Up" and "Down" Adjust blue balance, Range 0 to 255 Backlight Use "Up" and "Down" Adjust backlight dimming v oltage, Range 0 to 100


SpecialMenuFeature Button Description

DosGfxOnOff Press "Conf irm" DOS Emulation, Range: ON or OFF Nv ramlnit Press "Conf irm" Initialize NV-RAM to f acto def aults



18.1 OSD-Keypad “OSD-Panel”

19.Technical Specification

- Supply voltage ripple: 100 mV peak to peak 0 - 20 MHz

VGA connector signals

Sync input voltage low : 0.8 V

Sync input voltage high : 2.4 V

RGB input voltage : 0 - 0.7 V with 75 Ohm external termination

RGB input current : 0 - 5 mA


20.Supported Video Modes

20 Supported Video Modes Video Mode Input Maximum vertical refresh Mode No. Mode standard

720 x 400 70 Hz 1 DOS 640 x 350 70 Hz 2 EGA640 x 400 70 Hz 3* DOS 640 x 400 85 Hz 4* DOS 640 x 480 60 Hz 5 VGA640 x 480 72 Hz 6 VGA640 x 480 75 Hz 7 VGA640 x 480 85 Hz 8* VGA800 x 600 56 Hz 9 SVGA800 x 600 60 Hz 10 SVGA800 x 600 72 Hz 11 SVGA800 x 600 75 Hz 12 SVGA800 x 600 85 Hz 13* SVGA1024 x 768 60 Hz 14 XGA 1024 x 768 70 Hz 15 XGA 1024 x 768 74 Hz 16* XGA 1024 x 768 75 Hz 17 -1024 x 768 85 Hz 18* XGA 1024 x 384 85 Hz 19* -1152 x 864 59 Hz 20* -1152 x 864 70 Hz 21 * -1152 x 864 75 Hz 22* -

1280 x 1024 60 Hz - -1280 x 1024 75 Hz 24* SXGA 640 x 480 66 Hz 25* VGA832 x 624 76 Hz 26* -720 x 240 60 Hz 27* NTSC 720 x 286 50 Hz 28* PAL

* Note : These mode can be detected but no image is available on the flat panel.

21.Serialnumber

(X)3A019999AK

(X) internal (S,F,R)

3 – 2003

A – January (A = Jan, B=Feb, etc.)

01 – Day of endtest

9999 – serial number

AK – internal


[email protected]

Data Modul AktiengesellschaftLandsberger Str. 322 D-80687 München Tel.: +49 -89 -56017 -0Fax: +49 -89 -56017 -119

Data Modul Sales Office Hamburg An der Alster 48 D-20099 Hamburg Tel.: +49 -40 -280158 -0Fax: +49 -40 -280158 -19

Data Modul Sales Office DüsseldorfFritz-Vomfelde-Str. 8 D-40547 Düsseldorf Tel.: +49 -211 -52709 -0Fax: +49 -211 -52709 -19

Data Modul Sales Office StuttgartFriedrich-List-Str. 42 D-70771 Leinfelden-Echterdingen Tel.: +49 -711 -794613 -5Fax: +49 -711 -794613 -7

Data Modul Sales Office [email protected].: +49 -671 -92087 -12Fax: +49 -671 -92087 -14

Data Modul Inc.1767-46 Veterans Memorial HighwayIslandia NY 11749 USATel.: +1 -631 -951 -0800Fax: +1 -631 -951 -2121

easypanel - qscomp.cz · data modul ag - landsberger str. 322 - 80687 münchen ... 13.7 storage...

Documents