eccs91_14

20
7/29/2019 eccs91_14 http://slidepdf.com/reader/full/eccs9114 1/20 Architecture Steel Stahl A cier 14 Steel Stahl Acier 14 Architecture The Eden Project Das Eden Projekt Le Projet Eden

Upload: nuno-amaral

Post on 14-Apr-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 1/20

Architecture Steel Stahl A cier 14

Steel Stahl Acier

14

Architecture

The EdenProject

Das EdenProjekt

Le ProjetEden

Page 2: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 2/20

Architecture Steel Stahl A cier 14

Eden

ECCS N° 91-14ISBN 92-9147-000-73

All rights reserved.No part of this publication may be reproduced in anymanner whatsoever without permission in writingfrom ECC S.

Tous droits réservés.Aucune partie de ce document ne peut être reproduitesansautorisation écrite de la CECM .

Alle Rechte vorbehalten.Kein Teil dieser Publikation darf ohne schriftlicheZustimmung der ECCS in jedwelcher Form vervielfältigtwerden.

Eden Eden

Project PlanthouseCornwall, UK

Client Eden Project Limited

Architects NicholasG rimshaw &Partners Ltd.

Structural engineers 

Anthony Hunt A ssociates

Climatisation o f t he biomes O ve Arup & Partners

Metal structures M ero GmbH

Projekt G ewächshäuserCornwall, Großbritannien

Bauherr Eden Project Limited

Architekten NicholasG rimshaw &Partners Ltd.

Tragwerksplanung 

Anthony Hunt A ssociates

Klimatisierung der Biomes O ve Arup & Partners

Metallstrukturen M ero GmbH

Projet SerreCornouailles, Angleterre

Maître d ’ouvrage Eden Project Limited

Architectes NicholasG rimshaw &Partners Ltd.

Ingénieurs stru ctu re 

Anthony Hunt A ssociates

Climatisation des biomes O ve Arup & Partners

Structures métalliques M ero GmbH

Page 3: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 3/20

1Architecture Steel Stahl A cier 14

The Project

The Eden Project, a showcase for global di-versity located in the remote county of

Cornwall, is the largest plant enclosure inthe world, recreating tropical and warmtemperate habitats. It was the brainchild ofTim Smit, who had previously been respon-sible for the renewal of C ornwall’s ‘LostGardens of Heligan’, and Jonathan Ball, alocal architect. Their aspiration was to bringto the public the fascinating story of man’srelationship with plants through a non-prof-it making charitable scientific organisation.

The development was based in Cornwallfor a number of reasons: the mild climatehelps to achieve the ideal growing condi-tions inside the plant houses, the high levelsof unemployment in the area would benefitfrom the presence of the project, and therewere a number of suitable sites availablewith good road and rail access. The particu-lar location selected – the Boldeva Pit – wasa china clay pit which was approaching theend of its commercial life as a quarry, andthis gave the further benefit of land recla-

Das Eden Projekt, eine Ausstellung der V iel-seitigkeit unserer Welt, liegt in einem abge-

legenen Teil von C ornwall, ist der Weltgrößte Anlage für Pflanzen und beinhaltetZonen vom W üsten- bis zum tropischen K li-ma. Es war das geistige K ind von Tim Smit,der bereits vorher für die Erneuerung der“ Lost G ardens of Heligan” verantwortlichwar und von Jonathan Ball, einem ortsan-sässigen Architekten. Ihre Vorstellung war,der Allgemeinheit die faszinierende Ge-schichte des Zusammenlebens von M en-schen und Pflanzen näherzubringen unddies durch eine nicht gewinnorientierte,wohltätige und wissenschaftliche Organisa-tion.

Das Projekt wurde aus mehreren Grün-den in Cornwall angesiedelt: das milde Kli-ma begünstigt ideales Wachstum innerhalbder Wintergärten, der hohe Stand der Ar-beitslosigkeit innerhalb der Region würdedurch das Projekt vermindert und es gabeine Reihe von zufriedenstellenden Standor-ten mit guten Straßen- oder Bahnverbin-

Das Eden Projekt

1 Aerial view 

1 Luftaufnahme 

1 Vue aérienne 

   ©    R

   i  c   h  a  r   d   K  a   l   i  n  a

Réalisé dans une région isolée de Cor-nouailles, le projet Eden est le plus grand

 jardin botanique du monde. C omprenantune zone tropicale et une autre tempérée,il illustre bien la diversité de notre monde.O n doit cette idée originale à Tim Smit quis’était auparavant occupé de la restaurationdesLost Gardens of Heligan et à JonathanBall, un architecte local. Ils souhaitaient fairepartager au public leur fascination pour lesrapports entre l’homme et les plantes, et cepar le biais d’un organisme scientifique àbut non lucratif.

Le projet a vu le jour en Cornouaillespour des raisons diverses: tout d’abord, ladouceur du climat y est gage de conditionsde croissance idéales dans les serres;ensuite il permettait de créer des emploisdans une région connaissant un fort taux dechômage; et, enfin, il y avait un grandnombre de sites possibles bénéficiant d’ac-cès routiers et ferroviai res aisés. L’emplace-ment finalement retenu, à Boldeva, étaitune carrière de kaolin dont l’exploitation

Le projet Eden

Page 4: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 4/20

2 Architecture Steel Stahl A cier 14

mation. The pit covered an area of about15ha and presented a dramatic landscape,including significant south-facing rockslopes which would help to create the de-sired climatic conditions. The concealed ap-proach to the site would also add to thedrama experienced by visitors as they enterthe project.

The primary design objective was to cre-ate the correct environment for growth us-ing minimum water and energy. The key is-sues for the enclosures were orientation,natural lighting and heating, and maximumrecycling of water.

Nicholas G rimshaw & Partners were ap-pointed as architects for the project and de-veloped a prototype for the plant houses,inspired by the sinuous, asymmetric form oftheir design for the International Terminal,Waterloo. This had been widely acclaimed,and the scheme design presented was in-strumental in securing funding, enablingthe project to proceed in detail.

dungen. Der schließ lich gewählte Standort -der Bodeva Pit- war eine Kaolingrube, derenkommerzielles Ende mit Streit verbundenwar, was den Landerwerb begünstigte. DieG rube hatte eine Fläche von ungefähr 15ha und zeigte eine bewegte Landschaft mitsignifikanten, südseitig gelegenen Felshän-gen, die sich für die Schaffung der ge-wünschten K limabedingungen gut eigne-ten. Der abgelegene Eingang zum G eländeträgt zum dramatischen Erlebnis der Besu-cher bei der Annäherung bei.

Das vorrangige Entwurfsziel war, richtigeWachstumsbedingungen bei einem M ini-malaufwand von Wasser und Energie zuschaffen. Dies wurde erreicht durch maxi-male Nutzung von natürlicher Belichtung,sowie durch maximales Recycling von Was-ser.

Nicolas Grimshaw & Partners wurden alsArchitekten ausgewählt und entwickelteneinen Prototyp für die Gewächshäuser, ähn-lich ihrem Entwurf für die gekrümmte,asymmetrische Form des International Ter-minal Waterloo in London. Dieser wurdeweithin anerkannt und der vorgelegte Ent-wurf war gut geeignet, die Geldmittel zu si-chern und die Detailplanung fortzuführen.

2 3    M .

   D  y  e  r   A  s  s  o  c   i  a   t  e  s

commerciale touchait à sa fin et qui allaitdonc nécessiter un réaménagement paysa-ger. La mine à ciel ouvert s’étendait sur unesuperficie d’environ 15 ha et présentait unterrain très accidenté avec des falaisesorientées au sud offrant des conditions fa-vorables pour les installations climatiquesenvisagées. L’isolement du site contribueégalement à impressionner le visiteur parson côté spectaculaire.

L’idée de base du projet était d’offrir auxplantes les conditions idéales de croissancetout en économisant au maximum l’eau etl’énergie. O n a atteint cet objectif en recou-rant le plus possible à la lumière et à la cha-leur solaires et en recyclant l’eau.

O n a confié le projet au cabinet d’archi-tecture Nicolas G rimshaw & Partners qui aconçu un type original de serre s’ inspirantde la forme sinueuse et asymétrique de leurgare internationale de Waterloo à Londres.Cette réalisation leur avait valu un concertde louanges et leur nouveau projet possé-dait toutes les qualités requises pour en as-surer le financement et en poursuivre l’étu-de de détail.

Page 5: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 5/20

3Architecture Steel Stahl A cier 14

Planning

The project includes three principal structur-al elements encapsulating two plant hous-

es, and a link building connecting the two.The plant houses, which recreate quite dif-ferent atmospheres – one providing a hu-mid tropical region, the other a warm tem-perate region – are accommodated withinseparate ‘biomes’, each an amalgam ofgreat transparent domes, rising up to 55mabove the ground. The exact location of thebiomes on site was determined by solarmodelling, a sophisticated technique whichindicated where the structures would bene-fit most from passive solar gain. A separatebuilding houses the Visitors’ Centre on ahilltop providing a gateway to the site.

The site provided a dramatic landscape,and the brief was to maintain as much ofthe wild, rugged appearance as possiblewhile creating a safe, stable environmentfor visitors. A digital ground model basedon aerial survey data was used to sculpt thepit, to create terraces around the perimeterfor access and parking. This involved cutand fill operations for approximately800 000 m3 of material, and deliberatelyavoiding the movement of material ontoor off the site.

Das Projekt besteht aus drei Strukturele-menten und zwar aus zwei G ewächshäu-

sern und einem Verbindungsbau dazwi-schen. Die G ewächshäuser, die sehr ver-schiedene Umgebungen erzeugen, – daseine erzeugt eine feuchte, tropische, dasandere eine warme, gemäß igte Umwelt –sind in getrennten ” Biomes” untergebracht,

 jedes eine Gruppe von großen, transparen-ten Kuppeln mit Höhen bis zu 55 m. D ie ge-nauen Standorte wurden durch Solarsimula-tionen festgelegt, eine hochentwickelteTechnologie, die anzeigt, wo die Strukturenam meisten vom natürlichen Sonneneinfallprofitieren. Ein getrenntes Gebäude be-inhaltet das Besucherzentrum. Es liegt aufeinem Hügel und ist mit einem überdachtenZugang zum Ensemble ausgestattet.

Das Terrain bildet eine äußerst bewegteLandschaft und es war beabsichtigt, sovielals möglich von dem wilden, zerklüftetenErscheinungsbild zu erhalten und dem Be-sucher dennoch eine sichere und gleichblei-bende Umwelt zu bieten. Ein auf Luftauf-nahmen basierendes, digitales Bodenmodellwurde verwendet, um die Grube zu model-lieren, um Terrassen für Zufahrten und Park-plätze zu schaffen. Dies erforderte Boden-bewegungen von ca. 800.000 m3 M aterial,ohne daß M aterial an- oder abtransportiertwurde.

Die Planung

2 Site plan 

3 Aerial view of the site 

4 The approach to Eden 

2 Lageplan 

3 Luftaufnahme des Geländes 

4 Der Zugang zu Eden 

2 Plan de masse 

3 Vue aérienne 

4 L’ar rivée au site 

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

Le projet se compose de trois zones diffé-rentes: deux serres et un bâtiment de

liaison. Les serres qui recréent deux bioto-pes bien différents – l’un humide et tropical,l’autre, tempéré –sont formées par deuxbiodômes séparés, faits de la juxtapositionde grands dômes transparents dont la hau-teur, au point culminant, atteint 55 mètres.Leur position exacte a été déterminée avecsoin grâce à une technologie de simulationsolaire des plus sophistiquées pour faire ensorte que les installations profitent au maxi-mum de la lumière naturelle. Un bâtimentséparé constitue le Centre des visiteurs; ilse dresse sur une colline voisine et permetd’accéder, à l’abri des intempéries, à l’en-semble des installations.

Le terrain forme un paysage plutôt acci-denté et l’on s’est efforcé d’en conserver aumaximum l’aspect sauvage, crevassé, touten offrant au visiteur un environnement sûret stable. O n a utilisé une maquette numéri-sée du terrain, obtenue grâce à des photo-graphies aériennes, pour aménager la car-rière et dessiner des terrasses alentour pourles accès et les parkings. Pour y parvenir, il afallu néanmoins remuer quelque 800000m3 de terre mais sans avoir à en apporterou à en enlever.

Le plan

Page 6: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 6/20

4 Architecture Steel Stahl A cier 14

10 

5 6 7 8  

5,6 Analogies of structures found in nature 

7 A 3-dimensional model fo r design development 

8 Model of the inter- linked domes 

9 Roof plan showing the main steel structure of the biomes 

10 Interio r view 

5,6 Von der Natur erzeugte Struktu r- analogien 

7 3-dimensionales Mod ell des Entw urfs 

8 Modell der Kopplungen 

der Kuppeln 9 Dachaufsicht der 

primären Stahl- konstruktion der Biomes 

10 Innenansicht 

   A .

   H  u  n   t   A  s  s  o  c   i  a   t  e  s

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

5,6 Formes analogu es naturelles 

7 Maquet te tridimensionnelle pour l’étude du pr ojet 

8 Maquette pour la 

liaison des biodômes 9 Vue en plan révélant la 

struct ure métalli que des biodômes 

10 Vue intérieu re 

Page 7: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 7/20

5Architecture Steel Stahl A cier 14

Structural Form of theBiomes

Because mining activities were continuingright up to the beginning of construction

work, the exact profile of the pit was uncer-tain. The initial scheme for the biomes usedcurved arch trusses at regular intervalsspanning from the base of the pit to thecliff face. Each truss therefore had a uniqueprofile and span, offering little opportunityfor repetition and rationalisation. Perhapseven more importantly, the nature of such astructural form would have necessitatedsome redesign once the exact ground lay-out had been determined finally, and thiswould have caused delays in construction.This led to a radical change to the basicform, with the development of a series ofintersecting domes of varying diameter, theconcept being that once the size and rela-tive position of the domes had been deter-mined, the shape of the pit became of sec-ondary concern. This enabled the structuralform of the domes to be defined, with onlythe position of the foundations and the ex-tent of the cladding depending on the inter-section line between superstructure andground. Design development was thereforeable to continue before final survey of pit.

The revised design evolved as a collabo-rative series of adjustments to a working 3-dimensional computer model passed digital-ly between the architects, engineers and

contractors. The system represents the per-fect fulfilment of Buckminster Fuller’s visionof the maximum enclosed volume withinthe minimal surface area. The biomes are asinuous sequence of 8 inter-linked geodesicdomes threading around 2.2 hectares ofthe site. These ‘Bucky balls’ (named afterFuller) range in size from 18m to 65m radi-us in order to accommodate the varyingheights of the plant life. The biomes are anexercise in efficiency, both of space and ofmaterial. Form follows function, a tangibleexpression of the client’s aim to draw globalattention to human dependence uponplants.

Weil Bodenveränderungen bis zum Zeit-punkt der M ontagen durchgeführt wurden,war das genaue Profil des Bodens nicht be-kannt. Die ursprünglich für die” Biomes” ge-planten, gekrümmten Träger sollten mitgleichbleibenden Abständen vom Grundder Grube bis zu Oberflächen felsiger K lip-pen führen. Dadurch hätten alle Träger ver-schiedene Formen und Spannweiten, wo-durch kaum M öglichkeiten für Wiederho-lungen oder gleiche Bauteile vorhanden wa-ren. Vielleicht noch wesentlicher war, daßbei solchen Strukturen nachträgliche Verän-derungen gemäß dem endgültigen Boden-profil notwendig werden könnten, was Ver-zögerungen verursacht hätte. Dies führte zueiner weitgehenden Umgestaltung derG rundformen durch die Entwicklung einerReihe von einander durchdringender Kup-peln mit verschiedenen Durchmessern, wo-bei das Konzept darin bestand, daß wenneinmal Größen und Positionen der Kuppelnzueinander entschieden waren, die Formder Grube nicht mehr von entscheidenderBedeutung war. Dies ermöglichte die Festle-gung der Form der Strukturen der Kuppeln,wobei nur mehr die Lage der Fundamenteund die M aße der Außenhaut von der Bo-dengestalt abhängig waren. Der Planungs-fortschritt war nunmehr vor der endgültigenG estaltung der Grube möglich.

Der veränderte Entwurf wurde auf derBasis einer iterativen Serie von 3-dimensio-nalen Rechnersimulationen, an denen dieArchitekten, die Ingenieure und die ausfüh-renden Firmen beteiligt waren, erstellt. DasSystem erfüllt perfekt Buckminster FullersVision vom maximalen Rauminhalt bei ge-ringster Oberfläche. Die “ Biomes” sind ge-krümmte Körper von 8 ineinander überge-hender, geodätischer Kuppeln, die 2,2 hader Baufläche überdecken. D iese “ Buckyballs” (benannt nach Fuller) haben Radienvon 18 bis 65 m, um sich den verschiede-nen Höhen der darin befindlichen Pflanzenanzupassen. D ie ” Biomes” sind vorbildlich

für den Umgang mit Raum und M aterial.Form follows function ist hier der handgreif-liche Ausdruck des Kundenwunsches nachglobaler Bewußtwerdung der Abhängigkeitdes M enschen von der Pflanzenwelt.

Die Struktur der“ Biomes”

L’activité de la carrière étant poursuivie jus-qu’au début des travaux de construction, il

était impossible de connaître avec précisionle profil f inal du sol. À l’origine, on avaitprévu des supports en arc pour les biodô-mes mais les écarts entre chacun d’eux de-vaient nécessairement demeurer rigoureu-sement constants depuis le sol jusqu’ausommet de la falaise. Tous ces arceaux pré-sentant des formes et des portées différen-tes, cela ne laissait pratiquement aucunepossibilité de fabrication en série ni mêmeen deux exemplaires. Et, plus grave encore,les modifications de dessin nécessitées parl’état final du sol auraient causé d’impor-tants retards de construction. O n a doncrevu complètement les formes de base, eton en est arrivé à une série de coupoles dediamètres variables, s’interpénétrant. Dèslors, une fois la taille et la position de lacoupole déterminées, le profil du sol n’inter-venait plus de façon décisive. Il devenaitainsi possible de fixer la forme des supers-tructures avant même de disposer du relevédéfinitif de la carrière.

A insi modifié, le projet a été conçu sur labase d’une maquette en trois dimensionsconfectionnée à l’aide d’un ordinateur parune équipe regroupant architectes, ingé-nieurs et entreprises concernées. Le résultatobtenu correspond en tous points au con-

cept de Buckminster Fuller, qui consiste àenclore le plus grand volume possible aumoyen de l’enveloppe la plus petite possi-ble. Les biodômes sont donc constitués del’assemblage sinueux de huit coupoles géo-désiques qui s’interpénètrent et recouvrentune surface utile de près de 2,2 ha. Ces bal-lons “ Bucky” , nommés ainsi d’après leprénom de Fuller, mesurent de 18 à 65 mè-tres de rayon, atteignant donc des hauteursvariables pour s’adapter à la taille des plan-tes. Ces biodômes constituent de véritablesmodèles en matière d’utilisation de l’espaceet des matériaux. “ Form follows function (la forme suit la fonction)” , cette devise ex-

prime parfaitement les vœux du maître del’ouvrage qui désirait rendre l’homme uni-versellement conscient de sa dépendancevis-à-vis du monde végétal.

La structure desbiodômes

Page 8: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 8/20

6 Architecture Steel Stahl A cier 14

The Skin

The principal design criterion for the enve-lope was to maximise light – essential for

achieving ‘natural’ growing conditions. Thespace frame form of the domes minimisedthe size and number of structural elements,and the required transparency of the enve-lope was achieved using ETFE (EthyleneTetra Fluoro Ethylene) foil. ETFE is highlytransparent to a wide spectrum of light. It isa thin, lightweight material, and it is there-fore capable of covering wide spans sup-ported by the most minimal of structures.Each cushion is assembled as an independ-ent unit with its own aluminium frame ena-bling rapid installation within the mainstructure. This was achieved by bolting thealuminium frame to brackets on the tubularsteel structure at regular intervals.

The foil is used in the form of a triple lay-er pneumatic cushion within the frame ofeach hexagon. The whole cladding system

Das Grundprinzip für die Entwicklung waroptimale Lichtausbeute – wesentlich für

“ natürliche” Wachstumsbedingungen. DieRaumtragwerke der K uppeln reduzierenG röße und Zahl der Elemente und die ge-forderte Lichtdurchlässigk eit der Außenhautwurde durch Verwendung einer ETFE-Folie(Ethylen Tetra Fluor Ethylen) erreicht. ETFEist hochtransparent für ein weites Lichtspek-trum. Es ist ein dünnes, leichtes M aterialund daher geeignet, große Flächen mit sehrzarten Unterkonstruktionen zu überspan-nen. Jedes K issen ist als eigenständige Ein-heit mit einem eigenen Aluminiumrahmenbefestigt, was eine schnelle M ontage andas Haupttragwerk ermöglicht. Die A lumini-umrahmen wurden in gleichbleibenden A b-ständen mit Schuhen mit der Stahlrohrkon-struktion verschraubt.

Die dreilagige Folie hat die Form einesaufgeblasenen K issens innerhalb eines

Die Außenhaut

11  12 13  

14 

   G  r   i  m  s   h  a  w

   A .

   H  u  n   t   A  s  s  o  c   i  a   t  e  s

   S .

   B  u  r   t   /   A  p  e  x

Le critère de base ayant présidé au choix dumatériau de l’enveloppe a été sa transpa-

rence — essentielle pour assurer des condi-tions “ naturelles” à la croissance des plan-tes. La forme même des coupoles permetde réduire le nombre et la taille des structu-res porteuses; on a obtenu la transparencedésirée en utilisant des films d’ETFE (ethylté-trafluoro-éthylène). Ce matériau très trans-parent, laisse passer un spectre lumineuxextrêmement large. A lliant f inesse et légère-té et tout juste soutenu par de modestessupports, il est donc apte à recouvrir de vas-tes espaces. Chaque coussin est une uni téautonome renforcée par un cadre en alumi-nium qu’il est facile de fixer à la structureporteuse: cela permet un montage rapide.Ces cadres en aluminium ont été fixés à in-tervalles réguliers par des pattes aux sup-ports tubulaires en acier.

Chaque coussin empli d’air est composé

L’enveloppe

Page 9: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 9/20

7Architecture Steel Stahl A cier 14

weighs approximately 15kg/m2 comparedwith about 75kg/m2 for double glazing, andprovides an equal level of thermal insulation(U = 2.3/m2/K). This system therefore en-sures that not only the maximum amount ofdaylight filters through the biomes’ skin tonourish the plant life within, but also itsheat is retained.

Because of their exceptional size, the de-sign of the ETFE cladding panels was devel-oped through a series of physical tests. Thisled to a refined patterning to form thecushion profile, and on the largest pillows,the cable net reinforcement was generallyomitted in favour of a second top layer offoil.

The cushions are inflated to a nominalpressure, which can be increased in theevent of heavy snow to prevent deflationunder sustained load.

The smooth surface of the ETFE providesa self cleaning surface. It is unaffected byultra violet radiation or atmospheric pollu-tion, and has a life expectancy in excess of40 years.

Individual panels are light and replace-ment is therefore much easier than for dou-ble glazing, and short term repairs can beeffected using adhesive ETFE tape.

ETFE represents less than one percent ofthe dead weight of equivalent glass. It isalso strong, anti-static and recyclable, con-tributing to the overall realisation of theEden biomes as tangible examples of ener-gy-awareness in action. Elsewhere on site,energy-awareness is manifest in both theBiome Link building and the Visitors’ Cen-tre.

sechseckigen Rahmens. Das gesamte Ver-kleidungssystem wiegt ungefähr 15 kg/m2,verglichen mit ca. 75 kg/m2 für Doppelver-glasung und hat ähnliche Werte für dieWärmedämmung (U= 2,3/m2/K). Deshalbgarantiert dieses System nicht nur maximaleLichtdurchlässigkeit für das Pflanzenleben,sondern hält auch die Wärme zurück.

Wegen ihrer außergewöhnlichen G rößemußten für die Konstruktionen der Außen-haut die Paneele einer Reihe physikalischerUntersuchungen unterzogen werden. Diesführte zu einem verbesserten Entwurf fürdie Q uerschnitte der K issen und bei dengrößten Dimensionen wurden die Drahtbe-wehrungen durch eine zweite Folienlage er-setzt.

Die K issen sind mit einem Nominalluft-druck gefüllt, der für den Fall hoher Schnee-lasten erhöht werden kann, um größ ereVerformungen zu vermeiden.

Die glatte Oberfläche des ETFE ermög-licht Selbstreinigung. Sie ist unempfindlichgegen ultraviolette Strahlung oder atmos-phärische Verschmutzung und hat eine Le-bensdauer von ungefähr 40 Jahren. Die ein-zelnen Paneele sind leicht und ein A us-wechseln ist daher weitaus einfacher als beiDoppelverglasung. Kurzfristige Reparaturenkönnen mittels selbstklebender ETFE-Bänderdurchgeführt werden.

ETFE weist weniger als ein Prozent desG ewichts von gleichwertigem G las auf. Esist auß erdem fest, antistatisch und recycle-fähig. Es fungiert beim Eden-Projekt alshandgreifliches Beispiel für angewandtesEnergiebewußtsein. Überall auf dem Gelän-de ist dieses Bewußtsein spürbar, auch beimVerbindungsbau der “ Biomes” und beimBesucherzentrum.

11 The ETFE-cushion on 

its hexagonal frame 

12 Detai l of the hexagonal lattice 

13 View of the biomes under construction 

15 

11 Die ETFE-Deckung 

auf ihrem 6-eckigen Rahmen 

12 Detail des 6-eckigen Gitterwerks 

13 Die Biomes während der Errichtung 

14 Longitudinal section 

through the biomes’ steel structure 

15 Node during construction 

14 Längsschnitt durch 

die Stahlkonstruktion der Biomes 

15 Konstruktion der Knoten 

   A .

   H  u  n   t   A  s  s  o  c   i  a   t  e  s

de trois couches de feuilles; il est maintenuà l’intérieur d’un cadre hexagonal. Le poidsde cette enveloppe est d’environ 15 kg/m2

alors qu’un double vitrage offrant la mêmeisolation thermique (U = 2,3 m2/K) pèseraitenviron 75 kg/m2. Ce système est en consé-quence la garantie non seulement de lameilleure pénétration possible de la lumièreà l’intérieur des biodômes, mais aussi deleur excellente isolation thermique.

Du fait de la taille inhabituelle de l’en-semble, il a fallu soumettre les panneaux enETFE à toute une série de tests physiques.Ces expériences ont permis d’améliorer lacoupe transversale des coussins et, pour lespanneaux les plus grands, de remplacer leréseau de câbles de renfort par une couchesupplémentaire.

Les coussins sont gonflés à une pressiondéterminée qui peut être augmentée en casd’importantes chutes de neige afin d’évitertoute déformation due à une charge ac-crue.

La surface lisse de l’ETFE la rend autonet-toyante. Insensibles aux rayons ultravioletset à la pollution atmosphérique, ces pan-neaux ont une durée de vie de plus de qua-rante ans. Leur faible poids rend leur rem-placement relativement facile, bien plus aiséen tout cas que le double vitrage. O n peutégalement procéder à des réparations provi-soires à l’aide de bandes d’ETFE autocollan-tes.

Le poids de l’ETFE représente moins de1% de celui d’un double vitrage équiva-lent. En outre, il est solide, antistatique etrecyclable, contribuant de la sorte à la réus-site globale du projet Eden car ce matériauest véritablement exemplaire au niveau éco-nomies d’énergie. Cette préoccupation estsensible sur l’ensemble du site, y compris

dans le bâtiment de liaison entre les biodô-mes et dans le centre des visiteurs.

11 Un coussin en ETFE 

sur son cadre hexagonal 

12 Détail du treillis hexagonal 

13 La construction des biodômes 

14 Coupe longitudinale 

15 Construction d’un nœud 

Page 10: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 10/20

8 Architecture Steel Stahl A cier 14

The Structural Envelope

Structurally, each dome is a space frame re-liant on two layers. The outer layer is made

up of hexagonal modules that range in di-ameter from 5m to 11m. Each comprises sixstraight, compressive, galvanised steel tubesthat are light, relatively small and easilytransportable. This makes it possible foreach hexagon to be pre-assembled on theground before it is craned into position andsimply bolted to its neighbour by a standardcast steel node. The primary layer is bracedby an inner layer of diagonal members.

The contractor successful in tenderingfor the structure was M ero G mbH, who of-fered a combined package for both frameand cladding. This was based on a slightmodification to the initial design and incor-porated structural members in the form of a‘hex-tri-hex’ using circular hollow sections –193mm diameter with semi-rigid connec-tions at the special cast nodes for the outerstructure, and 114mm diameter withpinned connections via the standard M erosystem for the inner members. This alterna-tive offered reductions in the weight ofsteel.

Das Tragwerk jeder Kuppel besteht aus ei-nem Raumfachwerk in zwei Ebenen. Die

äuß ere Ebene besteht aus sechseckigen Ele-menten mit Durchmessern zwischen 5 und11 m. Jedes Element enthält sechs gerade,verzinkte Stahlrohre, die leicht, relativschlank und einfach zu transportieren sind.Dadurch konnten die Sechsecke am Bodenvormontiert, mittels Kran gehoben und mitStandardschrauben miteinander verschraubtwerden. Diese Primärebene wird durch Dia-gonalstäbe ausgesteift.

Der schließlich erfolgreiche Anbieter fürdas Tragwerk war die M ero-GmbH, die einkombiniertes Paket aus Tragwerk und Ver-kleidung angeboten hatte. Es basiert auf ei-ner leichten Veränderung des O riginalent-wurfs und besteht aus Stäben einer “ Hex-tri-Hex” , Rundrohren mit 193 mm Durch-messer und halbsteifen Verbindungen andie gegossenen Knoten für die äuß ere Ebe-ne und Rohren mit 114 mm Durchmesserund Steckverbindungen des M ero-Systemsfür die innere Ebene. Diese Alternative er-möglichte Einsparungen beim Stahlgewicht.

Die Tragstuktur

17 

18 

16 

16,17 M odel of the initial scheme for th e biomes with curved steel tru sses 

18 Model of the revised 

design 19 The steel structure 

during construction 

16,17 Modell des ursprünglichen Entw urfs mit gekrümmten Stah lt rägern 

18 Model l des geändert en Entw urf s 

19 Das Stahltragwerk während der Montage 

16,17 Maquett e de l’arc 

en treillis du pro jet d’origine 

18 Maquette du projet revu 

19 La structure d’acier pendan t les travaux  19 

   M .

   D  y  e  r   A  s  s  o  c   i  a   t  e  s

   I  m  a  g   i  n  a   t   i  o  n

   H  e  r   b   i  e   K  n  o   t   t

La structure porteuse de chaque coupole secompose de poutrelles en treillis à deux ni-

veaux. Le niveau extérieur est fait de modu-les hexagonaux dont le diamètre mesure de5 à 11 mètres; six tubes rectilignes en aciergalvanisé constituent chaque module; à lafois légers et peu encombrants, ils sont faci-les à transporter. Les hexagones sont mon-tés sur site, levés à l’ aide de grues et assem-blés les uns aux autres par des fixationsstandard. Des fers posés en diagonale ser-vent de raidisseurs.

Pour la construction de la structure por-teuse, l’entreprise dont l’offre a été finale-ment retenue est M ero G mbH qui avait faitune proposition groupée, incluant structureet enveloppe. En modifiant légèrement leprojet d’origine, elle se base, en ce qui con-cerne la structure extérieure, sur l’utilisationde tubes “ hex-tri-hex” de 193 mm de dia-mètre avec des raccords semi-rigides pourles nœ uds moulés et, pour les éléments in-térieurs, de tubes de 114 mm de diamètreet de nœuds M ero. Cette solution a permisde réduire le poids d’acier nécessaire.

La structure porteuse

Page 11: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 11/20

9Architecture Steel Stahl A cier 14

The objective was to use the largest sizeof cushion possible in order to maximizelight transmission and minimise cost, by re-ducing the number of connections andlength of aluminium framing. However, thelargest cushions required reinforcing with acable net, and so the smaller domes werescaled in size, with the smaller domes incor-porating smaller cushions.

The geometry allows the domes tomerge into each other and to follow theuneven contours of the pit. Where twodomes intersect they are supported by asteel arch. These were fabricated in seg-ments from curved tubes and site weldedtogether.

Das Ziel war, möglichst groß e Kissen zukonstruieren, um die Lichtausbeutezu erhö-hen und Kosten durch Reduzierung der Zahlder Verbindungen zu senken. A llerdings er-fordern die größten K issen eine Bewehrungdurch Drahtnetze; deshalb weisen die klei-neren Kuppeln auch kleinere Kissen auf.Die G eometrie erlaubt ein gegenseitigesDurchdringen der Kuppeln und eine A npas-sung an die Unebenheiten der Grube. Wosich zwei K uppeln schneiden, werden siedurch einen stählernen Bogenträger abge-fangen. Diese wurden in Segmenten vorge-fertigt und an Ort miteinander verschweiß t.

20 21 22  

23 

20 Die kugelförmigen Knoten 

21,22 Konstruktion der Biomes 

   G  r   i  m  s   h  a  w

   S   i  m  o  n   D  o   l   i  n  g

   S   i  m  o  n   D  o   l   i  n  g

23 Außenansicht der Knoten mit den Luftschläuchen für d ie ETFE-Verkleidung 

Le but était de réaliser des coussins aussigrands que possible afin de capter le maxi-mum de lumière et de réduire les coûts endiminuant le nombre de raccords et la lon-gueur totale des cornières en aluminium.Comme les coussins de plus grande tai llenécessitent un renfort en treillis métallique,on en a utilisé de plus petits pour les coupo-les de moindre envergure.

Cette géométrie permet une interpéné-tration des coupoles et une adaptation auxinégalités du terrain de la carrière. À l’en-droit où deux coupoles se rejoignent, ellessont soutenues par un arc en acier dont lessegments usinés ont été soudés sur place.

20 Bowl nodes 

21,22 Construction of the biomes 

23 Exterior view of the node showing t he air tubes for the ETFE pneumatic cushions 

20 Les nœuds circulaires 

21,2 2 Les biodômes en travaux 

23 Dessin d’un nœud mont rant les tubes d’air pour gon fler les coussins 

Page 12: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 12/20

10 Architecture Steel Stahl A cier 14

24 

25 

24 Construction of the biomes 

25-27 Interior views displaying the light ness and transparency of th e structure 

26 

   P  e   t  e  r   C  o  o   k

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

   S .

   B  u  r   t   /   A  p  e  x

24 Konstruktion der Biomes 

25-27 Die Innenansicht zeigt die Leichtigkeit und Transparenz der Struktur 

24 Construction des biodômes 

25 -27 Vues intérieu res illustrant la clartéet la transparence des structures 

Page 13: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 13/20

11Architecture Steel Stahl A cier 14

Internal Environment

The internal environment requires consist-ent temperatures in excess of 50ºC, with a

relative humidity (RH) of 95% . A s far aspossible, the project relies on natural heat-ing and ventilation to create these condi-tions. The rock faces play an important partin this, absorbing excess heat during theday, and releasing it during the night. Insummer, potentially excessive temperaturesare avoided by natural ventilation; the hexa-gons at the apex of each dome are subdi-vided into triangles to form opening vents,whilst cooler air is introduced at the base ofthe domes through louvred panels.

There is an ‘active’ heating system inplace in the biomes, but this is supplemen-tary: a means of ‘fine-tuning’ the naturalpassive system. When heating is needed itis provided by blowing air across the surfaceof the biomes, keeping them warm and in-ducing large air circulation currents to main-tain an even temperature distribution, with-out causing undue draughts.

These systems were devised and refinedwith the aid of innovative ComputationalFluid Dynamic studies, and are automaticallycontrolled to ensure that the correct condi-tions of temperature and humidity areachieved. This is set to provide the optimumconditions for the plants, with the minimumenergy consumption.

Rainwater is recycled for humidification.Even ground water seepage, a potentialproblem in other circumstances, has beentransformed into a positive resource, beingdistributed within the envelope for irrigationpurposes.

Die inneren Bedingungen verlangen einekonstante Temperatur von mehr als 50°C ,

bei einer relativen Luftfeuchtigkeit von95% . Soweit als möglich, werden dieseWerte durch natürliche Aufheizung und Lüf-tung erzeugt. Die felsigen O berflächen spie-len hierbei eine wichtige Rolle, weil sie ex-treme Hitze während des Tages aufnehmenund sie während der Nacht wieder abge-ben. Im Sommer werden mögliche extremeTemperaturen durch natürliche Be- und Ent-lüftung verhindert: die Sechsecke an denScheitelpunkten jeder K uppel wurden inDreiecke geteilt und werden geöffnet,wenn kühle Luft an der K uppelbasis durchJalousien zugeführt wird.

Es gibt auch ein künstliches Heizungssys-tem in den “ Biomes” , allerdings nur zusätz-lich, zur Feinregulierung des natürlichen Sy-stems. Wenn benötigt, wird Luft über dieO berfläche der “ Biomes” geblasen, er-wärmt sie und sorgt für eine gleichmäß igeLuftverteilung ohne Zugerscheinungen.

Diese Systeme wurden mit Hilfe vonrechnergestützten Studien von dynami-schem Strömungsverhalten entwickelt undverbessert. Sie werden automatisch über-prüft um sicherzustellen, daß die richtigenWerte von Temperatur und Feuchtigkeit ein-gehalten werden. Hierdurch werden diegünstigsten Bedingungen für die Pflanzen

bei minimalem Energieaufwand erreicht.Regenwasser wird zur Bewässerung recy-celt. Sogar G rundwasser, unter anderen Be-dingungen ein mögliches Problem, wird alsnützliche Ressource genutzt, indem dieAußenhaut damit berieselt wird.

Bedingungen im Inneren

27    A  r  u  p   /   A  n   d  y   P  a  s  s   i  n  g   h  a

  m

L’atmosphère à l’intérieur des biodômesdoit offrir une température de plus de 50°C

avec une hygrométrie de 95% . Dans lamesure du possible, on y parvient par desmoyens naturels: chauffage par le soleil etventilation. Les rochers environnants jouentici un rôle capital: ils emmagasinent la cha-leur durant la journée et la restituent lanuit. En été, on parvient à éviter les éven-tuelles températures excessives par uneventilation naturelle: les hexagones situésau faîte des coupoles sont divisés en trian-gles qui peuvent s’ouvrir tandis que de l’airplus frais est introduit au niveau du sol pardes panneaux munis de jalousies.

O n a également prévu un système dechauffage d’appoint pour les biodômes,mais uniquement pour affiner la régulationde la température obtenue par des moyensnaturels. En cas de besoin, de l’air est souf-flé sur la surface du biodôme pour la ré-chauffer afin de conserver les conditions at-mosphériques requises à l’ intérieur sans yprovoquer de courants d’air intempestifs.

Ce système innovant a été conçu et misau point grâce à des études assistées parordinateur sur la dynamique des fluides; ilest contrôlé automatiquement en perma-nence pour assurer température et hygro-métrie corrects. O n obtient de cette maniè-re les conditions idéales pour la végétation

tout en consommant un minimum d’éner-gie.L’eau de pluie est recyclée et sert à l’hu-

midification. La nappe phréatique qui, end’autres circonstances, aurait pu être sourcede problèmes, est uti lisée pour irriguer l’en-semble des plantations.

L’intérieur

Page 14: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 14/20

12 Architecture Steel Stahl A cier 14

M aintenance

To provide a 50 year design life for the ex-posure conditions prevailing inside the

domes, the steelwork is galvanized. Thecladding system will require regular atten-tion to seals, although no extensive replace-ment of the cladding panels is envisaged.However, facilities have been incorporatedwhich will allow for individual panels to bereplaced, if necessary, using a similar systemto that used during initial construction. Thebuilding management schedule includesregular inspections of the cushions to detectany damage. This will enable repairs to becarried out promptly and ensure the integri-ty of the envelope is maintained. Internalgantries are suspended from the steel frameto allow maintenance of the opening ventsat the apex of each dome.

Um eine Lebensdauer von 50 Jahren beiden Umweltbedingungen im Inneren der

Kuppeln zu gewährleisten, wurde das Stahl-tragwerk verzinkt. Das Verkleidungssystemverlangt regelmäßige Kontrollen der Dicht-heit, wobei kein umfassender Austauschder Paneele vorgesehen ist. Dennoch wur-den Vorkehrungen getroffen, die es erlau-ben, einzelne Paneele auszutauschen indemman, wenn erforderlich, ein ähnliches Sys-tem wie bei der M ontage verwendet. DerInstandhaltungsplan sieht auch regelmäß igeKontrollen der Kissen vor, um Beschädigun-gen festzustellen. Dadurch können Repara-turen schnell erfolgen und die Unversehrt-heit der Außenhaut ist sichergestellt. Innen-liegende Laufstege wurden von der Stahl-konstruktion abgehängt, um die Wartungder Öffnungsflügel an den Scheitelpunktender Kuppeln zuermöglichen.

Instandhaltung

29 

28 

30 

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

Afin de garantir cinquante ans d’existenceaux installations en dépit des conditions at-

mosphériques difficiles régnant à l’intérieurdes coupoles, on a utilisé de l’acier galvani-sé. L’étanchéité de l’enveloppe fait l’objetde contrôles réguliers, aussi n’est-il pas pré-vu de procéder à un remplacement généraldes panneaux. O n a toutefois conçu un sys-tème similaire à celui utilisé lors du montagepermettant de changer un panneau isolé encas de besoin. Les travaux de maintenancecomprennent l’inspection régulière descoussins afin de détecter toute détériorationéventuelle et de procéder ainsi dans un dé-lai très court aux réparations de manière àgarantir l’ intégrité de l’enveloppe. À l’inté-rieur, des passerelles suspendues à la struc-ture porteuse permettent la maintenancedes volets d’aération au faîte des coupoles.

La maintenance

Page 15: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 15/20

13Architecture Steel Stahl A cier 14

The Link

The Biome Link primarily functions as theentry to the biome complex, and has thus

been designed with the ease of visitormovement in mind. It is essentially twostructures within one: a front-facing publicfacility, incorporating a raised walkway intothe biomes, and a two-storey service areato the rear. The roof plane is ‘warped’ atboth ends, and its profiled steel deckingsupports a green roof system that allowsthe Biome Link seemingly to blend into the‘cool temperate zone’ of its surrounding en-vironment. Access is by way of a path thatwinds down through this zone from the Vis-itors’ Centre.

Der Verbindungsbau dient in erster Linie alsEingang in den “ Biome-Komplex” und wur-

de in Hinblick auf die Besucherströme ent-worfen. Er besteht hauptsächlich aus zweiBaukörpern, einem vorderen Bauteil für dasPublikum mit einem aufgeständerten Fuß-weg zu den “ Biomes” und einem Service-gebäude an der Rückseite. Die Dachebeneist an beiden Enden gekrümmt und die Dek-kung aus Stahlprofilblechen trägt ein be-grüntes Dach, das den Verbindungsbau op-tisch in die kühl temperierte Umgebungübergehen läßt. Den Zugang bildet ein ge-wundener Pfad, der vom Besucherzentrumdurch diese Zone führt.

Der Verbindungsbau

31 

32 

28 Maintenance entrance 

29 Vents and heating 

30 Collecting rainwater 

for humidification 

31 Exterior view of the Link 

32 General view of the Link interio r 

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

28 Wartungsflügel 

29 Heizung und Lüftung 

30 Sammlung des Regenwassers für 

die Besprengung 

31 Außenansicht des Verbindungsbaues 

32 Innenansicht des Verbindungsbaues 

Le bâtiment de liaison sert tout d’abordd’entrée aux deux biodômes; il a été dessi-

né dans le but d’accueillir la foule des visi-teurs. Il est divisé en deux parties: une enfaçade pour le public avec un passage suré-levé conduisant aux biodômes et une autre,de service, à l’arrière. Soutenue par despoutrelles d’acier et incurvée à ses deux ex-trémités, la toiture est entièrement verteafin de ménager une transition entre lesbiodômes et la “ zone tempérée” de l’envi-ronnement. O n y arrive par un sentier quiserpente depuis le centre des visiteurs.

Le bâtiment de liaison

28 Ent rée de service 

29 Bouches d’ aération et de chauffage 

30 Collecteur d’eau de 

pluie pour l’humidification 

31 Vue du bâtiment de liaison 

32 Vue intérieure du bâtimen t de liaison 

Page 16: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 16/20

14 Architecture Steel Stahl A cier 14

The Visitors Centre

Built on the apex of the site, the Visitors’Centre is primarily an educational facility,

with multimedia exhibits serving to intro-duce the aims and objectives of the project.The structure itself is equally informative, interms of what it reveals about the designethos of Eden as a whole. Dramaticallycurving to complement the contours of thequarry, it consists of two single-storey build-ings linked by a partially covered courtyard.While the smaller (service) building nestlesinto the quarry, the main building thrustsoutwards, offering a panoramic view of thebiomes.

The main building is steel framed. To thesouth, the roof surface (a steel deck cappedwith aluminium) forms an overhang thatshelters a rammed earth elevation. The useof rammed earth walling as a constructiontechnique is local to Cornwall. It is also verymuch in keeping with The Eden Project’semphasis on recycling. The material used isthe excess from excavation work carried outelsewhere on the site, geologically identi-fied as containing the required range of par-ticle sizes.

Errichtet am höchsten Punkt des Geländes,dient das Besucherzentrum in erster Linie

Unterrichtszwecken. M ultimedia-Vorführun-gen sollen in die Ziele und Absichten desProjekts einführen. Die bauliche Struktur istebenfalls informativ, weil sie die Entwurfs-philosophie des gesamten Eden-Projektsdeutlich macht. A ufregend geschwungen,den Konturen der G rube folgend, bestehtdas Besucherzentrum aus zwei eingeschos-sigen Baukörpern, mit einem dazwischenlie-genden, teilüberdachten Innenhof. Wäh-rend das kleinere (Service-) G ebäude in derG rube liegt, schiebt sich das Hauptgebäudenach außen und bietet einen Panoramablickauf die “ Biomes” .Das Tragwerk des Hauptgebäudes ist eineStahlkonstruktion. Südlich bildet das Dach(ein Stahlblechdach mit A luminiumdeckung)eine Auskragung, die einen aufgeschütte-ten Erdwall schützt. Diese Erdwälle sindeine in Cornwall traditionelle Technik. Siepassen auch in die, dem Eden-Projekt eige-nen Vorliebe für Recycling. Das verwendeteM aterial stammt aus Aushubarbeiten imG elände und wurde geologisch auf die ge-eigneten Korngrößen untersucht.

Das Besucherzentrum

33 

34 

33 Section of the Visitors´Centre 

34 The Visitors Centre 

   P  e   t  e  r   C  o  o   k

33 Schnitt durch das Besucherzentrum 

34 Besucherzentrum 

Érigé sur le point le plus élevé du site, lecentre des visiteurs a une fonction essentiel-

lement éducative. Il abrite des présentationsmultimédias qui renseignent le visiteur surles motivations et les objectifs du projet. Lastructure de ce bâtiment remplit égalementune fonction d’information en permettantde comprendre la philosophie de l’ensembledu projet Eden. Avec ses lignes élancéesépousant le profil de la carrière, le centre secompose de deux bâtiments d’un seul ni-veau reliés par une cour intérieure partielle-ment couverte. A lors que le plus petit (ré-servé au service) occupe une dépression, leplus grand se hisse en avant et offre unevue panoramique sur les biodômes.

La structure porteuse du bâtiment princi-pal est en acier. Au sud, la toiture (en acierrecouvert d’aluminium) en porte-à-faux estprotégée par un remblai de terre. Cette le-vée de terre constituant un rempart devantune construction obéit à une tradition loca-le. M ais elle correspond aussi à la motiva-tion profonde sous-tendue par le projet derecycler. Le matériau utilisé provient des tra-vaux d’excavation de la carrière et a étéchoisi, pour l’adéquation de sa granulomé-trie.

Le centre des visiteurs

33 Coupe du centre des visiteurs 

34 Le centre des visiteurs 

Page 17: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 17/20

15Architecture Steel Stahl A cier 14

The Eden Experience

The Eden Project has received critical ac-claim from the press and from the large

number of visitors who have already experi-enced it. Its popularity was evident from thestart when completion of the Visitors’ Cen-tre was brought forward, opening to thepublic in M ay 2000 to enable 500 000 visi-tors to observe the ongoing constructionwork. The whole project opened in M arch2001, since when visitor numbers have ex-ceeded all expectations, putting heavy de-mands on many of the facilities. However,the conditions in the biomes have been metand the plants have thrived. Energy con-sumption has been less than predicted,demonstrating the efficiency with which thesolar energy is captured and maintainedwithin the spaces.

Das Eden-Projekt hat kritischen Beifall in derPresse und von einer groß en Zahl von Besu-

chern erfahren. Seine Beliebtheit war vonBeginn an gegeben. A ls das Besucherzen-trum noch im Bau war, wurde es für die Ö f-fentlichkeit im M ai 2000 zugänglich und500.000 Besucher konnten die Errichtungbeobachten. Das Gesamtprojekt wurde imM ärz 2001 eröffnet, die Besucherzahlen ha-ben alle Erwartungen übertroffen und vieleder Einrichtungen sind äußerst gefragt. Je-denfalls sind die Bedingungen in den “ Bio-mes” eingehalten worden und die Pflanzengedeihen. Der Energieverbrauch hat sich alsniedriger herausgestellt als vorhergesagtund zeigt, wie effizient die Sonnenenergieinnerhalb der Räume genutzt und bewahrtwird.

Die Erfahrungen desEden-Projekts

35 

36 35,36 The illuminated 

biomes at nigh t 35,36 Nachtansicht der 

beleuchteten Kuppeln 

Le projet Eden a reçu une accueil très favo-rable de la part de la presse et de la foule

des visiteurs. Dès le début, il a bénéficiéd’une popularité évidente: malgré l’inachè-vement du centre des visiteurs, le parc s’estouvert au public en mai 2000 et 500000 vi-siteurs ont ainsi pu contempler l’avance-ment des travaux. L’ensemble du projet aété inauguré dans sa totalité en mars 2001.Le nombre des visiteurs a dépassé toutes lesprévisions et les installations ont, de ce fait,été mises à rude épreuve. M algré tout, lesconditions atmosphériques à l’intérieur desbiodômes ont pu être maintenues et lesplantes ont prospéré. La consommationd’énergie a été plus faible que prévu, ce quimontre bien l’efficacité du système de cap-tation et de rétention de l’énergie solairedans ce volume.

L’expérience duprojet Eden

35,36 L’illumination nocturne des biodômes 

Page 18: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 18/20

16 Architecture Steel Stahl A cier 14

Facts and Figure

Area of site: 50haArea of pit: 15haProject value: £86m

Humid Tropics BiomeArea: 1,5haM aximum height: 55mM aximum width: 110mLength: 240m

Warm Temperate BiomeArea: 0,65haM aximum height: 35mM aximum width: 65mLength: 135m

G rundfläche des G eländes: 50 haG rundfläche der Grube: 15 ha

Baukosten: 86 M ill. £

Tropisches FeuchtbiomeFläche: 1,5 haM ax. Höhe: 55 mM ax. Spannweite: 110 mLänge: 240 m

Warm-gemäßigtes BiomeFläche: 0,65 haM ax. Höhe: 35 mM ax. Spannweite: 65 mLänge: 135 m

Zahlen und Daten

37 

37 Internal view 

37 Innenansicht 

37 Vue intérieure 

   A  r  u  p   /   G  r  a   h  a  m    G

  a  u  n   t

Surface totale: 50 haSurface de la carrière: 15 ha

Coût de construction: 86 millions £

Biodôme tropicalSurface: 1,5 haHauteur maximale: 55 mLargeur maximale: 110 mLongueur: 240 m

Biodôme tempéréSurface: 0,65 haHauteur maximale: 35 mLargeur maximale: 65 mLongueur: 135 m

Le projet en chiffres

Page 19: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 19/20

Architecture Steel Stahl A cier 14

European SteelInformationSources

Architecture Steel Stahl Acier is intended to providearchitects with a seriesof case studiesof no tablebuildings built with steel.

EditorECC S-European Co nvention for Co nstructionalSteelwork

The publication is managed by ECC S Commi tteeAC 9: A rchitectural Aspects of Steel C onstruction

O riginal textRoger Plank

TranslationsPeter Cziffer, G ermanCedam, French

DrawingsNicholas Grim shaw & PartnersVector Special Projects (23)

Design and lay outEsko M iettinen, architect

Printed byLibris 8/2003

AUSTRIA

Ö sterreichischerStahlbauverband *Wiedner Hauptstraße 63,A -1045 Wien

Tel: +43 1 503 9474Fax: +43 1 503 9474 227

BELGIUM

Agoria *Diamant BuildingBld A . Reyers 80, B-1030 Brussels

Tel: +32 2 706 7962Fax: +32 2 706 7966

Centre Information AcierStaalinfocentrum (C IA )

Chaussée de Zellik 12, 1082 BruxellesZelliksesteenweg 12, B-1082 Brussels

Tel: +32 2 509 1504Fax: +32 2 511 1281

CROATIA

Hrvatska Zajednica zaM etalne Konstrukcije *

Janka Rakuse 1, HR-10 000 Zagreb

Tel: +385 1 614 4746Fax: +385 1 614 4744

CZECH REPUBLIC

Czech Constructional Steel-work Association *

Krokova 4, 700 30 Ostrava-ZaboehTel: +420 69 678 2600Fax: +420 69 357 730

DENM ARK

Dansk Stålinstitut *Kochsgade 31, DK -5100 O dense C

Tel: +45 66 13 08 88Fax: +45 65 91 87 89

ESTONIA

EestiTeraskonstruktsiooniühing *Ehitajate tee 5, 19086 Tallinn

Tel: +372 620 2410

Fax: +372 620 2405

FINLAND

Federation of Finnish M etal,Engineering and Electro-technical Industries *Eteläranta 10, FIN-00130 Helsinki

Tel: +358 9 192 31Fax: +358 9 624 462

Finnish ConstructionalSteelwork Association

Eteläranta 10, FIN-00130 Helsinki

Tel: +358 9 172 841Fax: +358 9 1728 4444

FRANCE

Syndicat de la ConstructionM étallique de France *20, rue Jean-Jaurès,F- 92807 Puteaux Cedex

Tel: +33 1 47 74 66 15Fax: + 33 1 40 90 08 60

Centre Technique Industrielde la Construction M étallique(CTICM )Domaine de Saint-Paul, BP 64,F-78470 Saint-Rémy-les-Chevreuse

Tel: +33 1 30 85 20 00Fax: +33 1 30 52 75 38

O ffice Technique pour

l’Utilisation de l’A cier (OTUA )13 Cours ValmyF - 92070 Paris La Défense

Tel: +33 1 41 67 04 02Fax: +33 1 41 25 55 70

GERMANY

Deutscher Stahlbau-VerbandDSTV *

Sohnstraß e 65, D-40237 D üsseldorf

Tel: +49 211 6707 800Fax: +49 211 6707 820

Bauen mit Stahl e.V.Sohnstraß e 65, D-40237 D üsseldorf

Tel: +49 211 6707 828Fax: +49 211 6707 829

Stahl-Informations-Zentrum

Sohnstraß e 65, D-40237 D üsseldorf

Tel: +49 211 6707 831Fax: +49 211 6707 344

HUNGARY

M agyarországi A célszerkezet -G yártók Szövetsége (M agész) *

2400 Dunaújváros, Vasmü tér 1-3,H-2401 Dunaújváros, Pf. 110

Tel: +36 25 583 970, 583 639Fax: +36 25 583 525

ITALY

Associazione fra i Costruttoriin Acciaio Italiani *

Viale A bruzzi 66, I-20131 M ilano

Tel: +39 02 2951 3413Fax: +39 02 2952 9824

LUXEM BOURG

Arcelor Building andConstruction Support

66 rue de LuxembourgL - 4221 Esch-sur-Alzette

Tel: +352 5313 3007Fax: +352 5313 3095

NETHERLANDS

SamenwerkendeNederlandse Staalbouw(SNS) *Boerhaavelaan 40, Postbus 190NL-2700 A D Zoetermeer

Tel: +31 79 353 1265Fax: +31 79 353 1365

Bouwen met StaalStationsplein 45, A4, 194NL - 3013 AK Rotterdam

Tel: +31 10 411 50 70Fax: +31 10 412 12 21

NORWAY

Den Norske Stålgruppen *

Postbok s 7072-M ajorstua,N-0306 Oslo 3

Tel: +47 22 59 01 03Fax: +47 22 59 01 33

PORTUGAL

Associação Portuguesa deConstrução M etálica e M ista(Cmm) *

Pálácio de Vila Flor,Av. D . A fonso Henriques,PT- 4810-431Guimarães

Tel: +351 253 415 142Fax: +351 253 415 389

ROM ANIA

Asociatia Producatorilor deConstructii M etalice DinRomania (APCM R) *1, Piata Iancu de HunedoaraRO - 2750 Hunedoara

Tel: +40 254 740 200Fax: +40 254 717 650

SLO VENIA

Institut za M etalneKonstrukcije *M encingerjeva 7, SI-1000 Ljubljana

Tel: +386 61 332 521Fax: +386 61 332 416

SPAINAsociación para laConstrucción deEstructuras M etálicas *

Plaça de la Unió, 1 Edificio B 1° 2a,ES-08190 Sant Cugat del Vallés

Tel: +34 93 589 3636Fax: +34 93 590 8249

Instituto Tecnico de laEstructura en Acero

Pol. Industrial de O rdiziaC/M allutz, Edificio 5,ES-20240 OrdiziaTel: +34 43 88 74 76Fax: +34 43 88 76 22

SWEDEN

Swedish Institute of SteelConstruction *Box 27751, S-115 92 Stockholm

Tel: +46 8 661 0280Fax: +46 8 661 0305

SWITZERLAND

Stahlbau Zentrum Schweiz/Centre Suisse de laConstruction M étallique *Seefeldstraß e 25, CH-8034 Zürich

Tel: +41 1 261 8980Fax: +41 1 262 0962

TURKEY

Turkish Constructional Steel-work Association (TUCSA) *K isikli M ah.Bulgurlu, Cad.18Uskudar, 81190 Istanbul

Tel: +90 216 325 7304Fax: +90 216 325 7184

UNITED KINGDO M

British ConstructionalSteelwork Association *

4 Whi tehall Court - Westmi nster,London SW1A 2ES

Tel: +44 20 7839 8566Fax: +44 20 7976 1634

Corus Construction

& IndustrialFrodingham HouseBrigg Road, ScunthorpeNorth Lincolnshire DN16 1BP

Tel: +44 1724 405 060Fax: +44 1724 404 224

The Steel ConstructionInstitute

Silwood Park, A scot, Berks, SL5 7QN

Tel: +44 1344 23345Fax: +44 1344 22944

ECC S G eneral Secretariat

A venue des O mbrages 32/20,B-1200 Brussels

Tel: +32 2 762 0429Fax: +32 2 762 0935

* ECC S member associations

Page 20: eccs91_14

7/29/2019 eccs91_14

http://slidepdf.com/reader/full/eccs9114 20/20

ArchitectureSteel Stahl Acier

The Eden Project in Cornwall, UK , is thelargest plant enclosure in the world,recreating tropical and warm temperatehabitats. The primary design objective wasto create the correct environment forgrowth using minimum water and energy.The key issues were also orientation,natural lighting and heating, and maximumrecycling of water.

The space frame form of the domes

minimised the size and number ofstructural elements, which are made of steeltubes bolted together by steel nodes. Therequired high transparency of the envelopewas achieved using ETFE (Ethylene TetraFluoro Ethylene) foil, a thin, lightweightmaterial and therefore capable of coveringwide spans supported by the most minimalof structures.

Das Eden-Projekt in Cornwall ist das größ teG ewächshaus der Welt mit tropischen undwarm-temperierten Zonen. Dasvordringlichste Entwurfsziel war, eineperfekte Umgebung für das Wachstum bei

M inimalverbräuchen von Wasser undEnergie zu schaffen. Wesentliche Kriterienwaren ebenso A usrichtung, natürlicheBelichtung und Beheizung, sowiegrößtmögliches Recycling von Wasser.

Das Raumtragwerk der Biomes reduziertG röße und Zahl der Stukturelemente ausStahlrohren, die mittels stählernenKnotenelementen verbunden sind. Diegeforderte hohe Transparenz derAußenhaut wurde durch die Verwendungeiner ETFE (Ethylen Tetra Fluor Ethylen)-Folie,eines dünnen und leichten M aterials,erreicht. So konnten große Spannweitenbei sparsamster Tragwerksdimensionierung

überdeckt werden.

   S .

   B  u  r   t   /   A  p  e  x

Le projet Eden en Cornouailles (Royaume-Uni) est le plus grand jardin botanique dumonde; il recrée deux écosystèmesdifférents, l’un tropical humide et l’autretempéré. Le premier objectif était de créerun environnement convenant à lacroissance des plantes en utilisant unminimum d’eau et d’énergie. Les pointsessentiels ont donc été l’orientation desbâtiments, leurs éclairage et chauffage

naturels et le recyclage de l’eau.La forme en coupoles a permis deréduire la taille et le nombre des structuresporteuses; celles-ci sont composées detubes d’acier assemblés par des nœudségalement en acier. O n a obtenu le degréde transparence requis pour l’enveloppe enemployant des feuilles en ETFE(ethyltétrafluoro-éthylène), un matériau finet léger, capable de couvrir de grandessurfaces tout en étant d’un coût réduit.