ece476_2009_lecture_22
TRANSCRIPT
![Page 1: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/1.jpg)
ECE 476 Power System Analysis Lecture 22
Transient Stability
Alejandro D. Dominguez-Garcia Department of Electrical and Computer Engineering
University of Illinois at Urbana-Champaign
![Page 2: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/2.jpg)
Transient Stability Analysis
For transient stability analysis we need to consider three systems
1. Prefault - before the fault occurs the system is assumed to be at an equilibrium point
2. Faulted - the fault changes the system equations, moving the system away from its equilibrium point
3. Postfault - after fault is cleared the system hopefully returns to a new operating point
![Page 3: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/3.jpg)
Transient Stability Solution Methods
There are two methods for solving the transient stability problem
1. Numerical integration this is by far the most common technique, particularly
for large systems; during the fault and after the fault the power system differential equations are solved using numerical methods
2. Direct or energy methods; for a two bus system this method is known as the equal area criteria mostly used to provide an intuitive insight into the
transient stability problem
![Page 4: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/4.jpg)
SMIB Example
Assume a generator is supplying power to an infinite bus through two parallel transmission lines. Then a balanced three phase fault occurs at the terminal of one of the lines. The fault is cleared by the opening of this line’s circuit breakers.
![Page 5: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/5.jpg)
SMIB Example, cont’d
Simplified prefault system
![Page 6: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/6.jpg)
SMIB Example, Faulted System
During the fault the system changes
The equivalent system during the fault is then During this fault no power can be transferred from the generator to the system
![Page 7: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/7.jpg)
SMIB Example, Post Fault System
After the fault the system again changes
The equivalent system after the fault is then
![Page 8: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/8.jpg)
SMIB Example, Dynamics
![Page 9: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/9.jpg)
Transient Stability Solution Methods
There are two methods for solving the transient stability problem
1. Numerical integration this is by far the most common technique, particularly
for large systems; during the fault and after the fault the power system differential equations are solved using numerical methods
2. Direct or energy methods; for a two bus system this method is known as the equal area criteria mostly used to provide an intuitive insight into the
transient stability problem
![Page 10: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/10.jpg)
Transient Stability Analysis
• For transient stability analysis we need to consider three systems
1. Prefault - before the fault occurs the system is assumed to be at an equilibrium point
2. Faulted - the fault changes the system equations, moving the system away from its equilibrium point
3. Postfault - after fault is cleared the system hopefully returns to a new operating point
![Page 11: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/11.jpg)
Transient Stability Solution Methods
• There are two methods for solving the transient stability problem
1. Numerical integration this is by far the most common technique, particularly
for large systems; during the fault and after the fault the power system differential equations are solved using numerical methods
2. Direct or energy methods; for a two bus system this method is known as the equal area criteria mostly used to provide an intuitive insight into the
transient stability problem
![Page 12: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/12.jpg)
Numerical Integration of DEs
![Page 13: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/13.jpg)
Examples
![Page 14: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/14.jpg)
Euler’s Method
![Page 15: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/15.jpg)
Euler’s Method Algorithm
![Page 16: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/16.jpg)
Euler’s Method Example 1
![Page 17: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/17.jpg)
Euler’s Method Example 1, cont’d
t xactual(t) x(t) Dt=0.1 x(t) Dt=0.05
0 10 10 10
0.1 9.048 9 9.02
0.2 8.187 8.10 8.15
0.3 7.408 7.29 7.35
… … … …
1.0 3.678 3.49 3.58
… … … …
2.0 1.353 1.22 1.29
![Page 18: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/18.jpg)
Euler’s Method Example 2
![Page 19: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/19.jpg)
Euler's Method Example 2, cont'd
![Page 20: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/20.jpg)
Euler's Method Example 2, cont'd
t x1actual(t) x1(t) Dt=0.25
0 1 1
0.25 0.9689 1
0.50 0.8776 0.9375
0.75 0.7317 0.8125
1.00 0.5403 0.6289
… … …
10.0 -0.8391 -3.129
100.0 0.8623 -151,983
![Page 21: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/21.jpg)
Euler's Method Example 2, cont'd
Dt x1(10)
actual -0.8391
0.25 -3.129
0.10 -1.4088
0.01 -0.8823
0.001 -0.8423
Below is a comparison of the solution values for x1(t) at time t = 10 seconds
![Page 22: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/22.jpg)
Transient Stability Example
• A 60 Hz generator is supplying 550 MW to an infinite bus (with 1.0 per unit voltage) through two parallel transmission lines. Determine initial angle change for a fault midway down one of the lines.���H = 20 seconds, D = 0.1. Use Dt=0.01 second.
Ea
![Page 23: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/23.jpg)
Transient Stability Example, cont'd
![Page 24: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/24.jpg)
Transient Stability Example, cont'd
![Page 25: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/25.jpg)
Transient Stability Example, cont'd
![Page 26: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/26.jpg)
Transient Stability Example, cont'd
![Page 27: ECE476_2009_Lecture_22](https://reader033.vdocument.in/reader033/viewer/2022051819/551f360149795987458b4b2f/html5/thumbnails/27.jpg)
Equal Area Criteria
• The goal of the equal area criteria is to try to determine whether a system is stable or not without having to completely integrate the system response.
System will be stable after the fault if the Decel Area is greater than the Accel. Area