ecofriendly solutions at work - smb datacenters
DESCRIPTION
TRANSCRIPT
EcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB DatacentersEcoFriendly solutions at work – SMB Datacenters
Allied Telesis SolutionsAllied Telesis Solutions
Eco Friendly switchesEco Friendly switches
Why bother ? Why bother ?
Eco Friendly switches – Why?Eco Friendly switches – Why?
• In 2005, 1% of worldwide electricity was used in data centers, and rate was growing at 14% per annum – J. Koomey, LBNL
• 2% of all C02 generated is from computers – the same amount as air transport – Gartner 2006
• 9.4% of US Electricity is used to power the Internet – Forrester 2007
• 3 to 5% of global consumption of energy spent to run Internet!!! – PC World 2010
• One Google search consumes enough electricity to run an 11-watt, energy-saving lightbulb for 15 minutes
Allied Telesis SolutionsAllied Telesis Solutions
How do you build an Eco Friendly switch ?How do you build an Eco Friendly switch ?
LogoLogo
Change manufacturing processChange manufacturing process• Allied Telesis build assemblies to meet the higher RoHS level 6
(lead free) standard.– RoHS level 5 allows the continued use of lead solder in networking
equipment– Manufacturing to RoHS level 6 requires redesigns of all PCB (printed circuit
boards) as the liquid lead-free solder has very different physical properties• Allied Telesis uses water-based technology to clean chemicals from
PCBs and not petrol/chemical-based solvents.
– An estimated 38.000 liters per year of solvent-based cleaner has been saved by adopting water-based technology
• Allied Telesis uses re-cycled water, and re-cycles water from our manufacturing facilities ensuring minimal impact to the environment.
Go even greenerGo even greener
Hardware designHardware design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInput
Hardware designHardware design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInput
High Efficiency Power Supply – up to 85%+
Hardware designHardware design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInput
Remove the Fan, or reduce the speed:
•Requires less power (smaller PSU).•Reduced Noise.•Increases Reliability do to fewer (less) moving parts.
Hardware DesignHardware Design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInput
Line Drivers can significantly reduce power:
• Measure and Minimise – Automatically measure the cable length, and only apply the necessary power.• Power down ports when not needed – (overnight, weekends, ..)• ‘Sleep’ Mode – reduce power when not connected – no active link.
Hardware DesignHardware Design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInputTurn off LED Indicators when not needed.
• Simple front panel switch to turn on/off the LEDs.• Reduces Power requirements, reduces heat, increases reliability.
Hardware DesignHardware Design
Single ChipGigabit
EthernetSwitch
PowerSupply
Eth
erne
t C
able
s
Connectors Line Drivers
Main CoolingFan
LED Indicators
LED Drivers
ACInput
Use of Latest Technology Silicon:• High levels of integration – fewer chips• Better Chip geometries (65nm) for lower power
“Green” User Interface
ResultsResults
– AT-FS705LE 1.3W– AT-FS708LE 1.49W– AT-9000/28 30.14W– AT-9000/28SP 36W – AT-9000/52 46.92W– AT-8000S/24 26.5W– AT-8000S/48 32.6W– AT-8000GS/24 40W– AT-8000GS/48 65W
Let’s put it another wayLet’s put it another way
52 million cups of tea boiled with the saved energy. (British cups that is)
Allied Telesis SolutionsAllied Telesis Solutions
SMB Datacenters SMB Datacenters
Data Center TrendsData Center Trends» Customer requirements
– Reducing power consumption– CONSOLIDATION– VIRTUALIZATION
Converge Networks
Energy Efficiency
SOX ComplianceData Center Consolidation
» Scalability on demand
» Network resiliency
» Reduced TCO
Multimedia Application Support
Major Requirements
SLA
Anatomy of a Cluster – PhysicalAnatomy of a Cluster – Physical» I/O fabric
– Ethernet – Quadrics – Myrinet– InfiniBand
» OOB management fabric– Ethernet– Serial
» Storage– Direct Attached Storage (DAS)– Network Attached Storage (NAS)– Full Storage Area Network (SAN)
» SAN fabric– Fiber channel– iSCSI w/ Ethernet– InfiniBand
Datacenter requirementsDatacenter requirements
Ethernet Interfaces (GbE, 10GbE, CX4/DA...)
High Performances (Low latency and non blocking switching)
Protocols Support (L2…
Mechanical/Airflow
End of Row and Top-of-Rack Aggregation
High Availability
High AvailabilityHigh Availability
Redundant Stackable core
– Link Aggregate across the VC-Stack
– High Redundant Network
– No STP or VRRP is necessary
– Easy to design to configure and to maintain
End-of-Row / Top-of-Rack / Aggregation
Aggregate rows of servers into an End-of-Row switch
» Allows dense aggregation
» Less switches in network
Aggregate rows of servers into an End-of-Row switch
» Allows dense aggregation
» Less switches in network
Connect one rack of servers into a Top-of-Rack switch
» Allows plug-and-play racks» Simplified cable
management
Top-of–Rack switches interconnect trough an Aggregator switch
Connect one rack of servers into a Top-of-Rack switch
» Allows plug-and-play racks» Simplified cable
management
Top-of–Rack switches interconnect trough an Aggregator switch
» Rack systems are extremely packed with servers and storage
» 42 rack unit height space needs to be maximized for computing power
End-of-Row switch
Aggregator switchTop-of-Rack switches
How does it look like?How does it look like?
Services
Americas Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
© 2011 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
Thank you!