ed brochure clean up tools
TRANSCRIPT
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 1/8
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 2/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone: +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone: +49 4441 7935
E.D. Non Rotating Casing Scraperwith Stabilizer
Features / Description
The Non Rotating Scraper is used to remove mud or
cement sheath, perforation burs, rust, mill scale,
parafin an similar substances from the casing ID.
It is the simplest and most rugged availabe scraper
of this type.
The Scraper can also be run immediately above thebit while drilling out plugs.
The Scraper will not rotate when the the drillstring
is rotated! This eliminates risk of damaging or
wearing casing when rotating drillstring.
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 9,5 - 11,6 2 3/8" Reg
5" 13 - 20,8 2 3/8" Reg
7" 17 - 38 3 1/2" Reg
9 5/8" 40 - 64,9 4 1/2" Reg
13 3/8" 48 - 72 4 1/2" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 3/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Casing ScraperStandard
Features / Description
The Non Rotating Scraper is used to remove mud or
cement sheath, perforation burs, rust, mill scale,
parafin an similar substances from the casing ID.
It is the simplest and most rugged availabe scraper
of this type.
The Scraper can also be run immediately above thebit while drilling out plugs.
Spring mounted blades provide 360° contact
with the casing ID
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 9,5 - 16,9 2 3/8" Reg
5" 13 - 20,8 2 3/8" Reg
5 1/2" 14 - 20 2 3/8" Reg
6 5/8" 20 - 32 3 1/2" Reg
7" 17 - 38 3 1/2" Reg
7 5/8" 24 - 33,7 3 1/2" Reg
8 5/8" 24 - 40 4 1/2" Reg
9 5/8" 40 - 64,9 4 1/2" Reg
10 3/4" 32,75 - 55,5 4 1/2" Reg
11 3/4" 42 - 71 4 1/2" Reg
13 3/8" 48 - 85 6 5/8" Reg
16" 65 - 75 6 5/8" Reg
18 5/8" 87,5 6 5/8" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 4/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone: +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone: +49 4441 7935
E.D. Non Rotating Casing Brushwith Stabilizer
Features / Description
The Non Rotating Brush is designed to remove
scale, rust, mud residue and any other particles
of debris that might be brushed from the
Casing ID.
The Tool can be run itself or as an integral
component of the E.D. Clean up Tools.
The E.D. Brush Tool features self-centering,
nonrational stabilizers to keep the non rotating
brush sleeve centered in the hole.
The Brush will not rotate when the the drillstring
is rotated!
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 9,5 - 13,5 2 3/8" Reg
5" 13 - 20,8 2 3/8" Reg
7" 17 - 38 3 1/2" Reg
9 5/8" 40 - 64,9 4 1/2" Reg
13 3/8" 48 - 72 4 1/2" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 5/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Casing BrushStandard
Features / Description
The Standard Brush is used to brush and clean
the casing ID.
The Brush Tool complete the cleaning process
and can be run simultaneously.
Plenty of room for bypassing cuttings is still
available with both the Scraper and the Brush.
Spring mounted brushes provide 360° contact
with the casing ID
Material options on brushes are available.
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 9,5 - 15,1 2 3/8" Reg
5" 13 - 20,8 2 3/8" Reg
5 1/2" 14 - 20 2 3/8" Reg
6 5/8" 20 - 32 3 1/2" Reg
7" 17 - 38 3 1/2" Reg
7 5/8" 24 - 33,7 3 1/2" Reg
8 5/8" 24 - 40 4 1/2" Reg
9 5/8" 40 - 64,9 4 1/2" Reg
10 3/4" 32,75 - 55,5 4 1/2" Reg
11 3/4" 42 - 71 4 1/2" Reg
13 3/8" 48 - 72 6 5/8" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 6/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Magnet Toolwith Stabilizer
Features / Description
The E.D. Magnet Tool is high temperature resistant
and creates a magnetic field designed to optimize
the capture of ferrous particles. The Tool can be
used in applications such as packer milling, window
milling or during clean out runs.
The Tool can be run itself or as an integral
component of the E.D. Clean up Tools.
The magnets of the tool are very strong and can affect
the operation of computer, watches and pacemakers.
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 9,5 -15,1 2 3/8" Reg
5" 11,5 -18 2 3/8" Reg
7" 20 - 38 3 1/2" Reg
9 5/8" 40 - 53,5 4 1/2" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 7/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Boot BasketStandard
Features / Description
The Boot Basket is used to collect debris that is too
large to be carried out or the hole by nirmal
circulation.
The design of the Boot Basket traps junk by
producing a sudden decrease in annular velocity
when the cuttings pass the larger OD of the boot
reaching the smaller OD of tjhe body and topconnection.
The Tool can be run itself or as an integral
component of the E.D. Clean up Tools.
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
7" 20 - 35 3 1/2" Reg
9 5/8" 36 - 53,5 4 1/2" Reg
7/29/2019 ED Brochure Clean Up Tools
http://slidepdf.com/reader/full/ed-brochure-clean-up-tools 8/8
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Oil Tools GmbH
Vechtaer Marsch 5 49377 Vechta
Phone +49 4441 7935
E.D. Taper Mill
Features / Description
E.D. Taper Mills are recommended for cleaning out
liners, tubing and other collapsed or deformed
tubulars. They can also be run ahead of other
component of the E.D. Clean up Tools.
The E. D. Taper Mill also acts as a guide when
entering the casing.
Taper Mills are simple and easy to use.
Specification Guide
Casing Size Weight Range A.P.I. Conn.
lb/ft
4 1/2" 11,6 2 3/8" Reg
4 1/2" 15,1 2 3/8" Reg
5" 15 2 3/8" Reg
5" 18 2 3/8" Reg
7" 29 3 1/2" Reg
7" 32 3 1/2" Reg
7" 35 3 1/2" Reg
9 5/8" 43,5 4 1/2" Reg
9 5/8" 53,5 4 1/2" Reg
11 3/4" 47,5 6 5/8" Reg
11 3/4" 71 6 5/8" Reg
13 3/8" 77 6 5/8" Reg
13 3/8" 85 6 5/8" Reg